See Full Document Text
Official Journal EN
of the European Union L series
2024/1107 23.5.2024
COMMISSION DELEGATED REGULATION (EU) 2024/1107
of 13 March 2024
supplementing Regulation (EU) 2018/1139 of the European Parliament and of the Council by laying
down detailed rules for the continuing airworthiness of certified unmanned aircraft systems and
their components, and on the approval of organisations and personnel involved in these tasks
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) 2018/1139 of the European Parliament and of the Council of 4 July 2018on common
rules in the field of civil aviation and establishing a European Union Aviation Safety Agency, and amending Regulations
(EC) No 2111/2005, (EC) No 1008/2008, (EU) No 996/2010, (EU) No 376/2014 and Directives 2014/30/EU
and 2014/53/EU of the European Parliament and of the Council, and repealing Regulations (EC) No 552/2004 and (EC)
No 216/2008 of the European Parliament and of the Council and Council Regulation (EEC) No 3922/91(1), and in
particular Article 58(1), points (a), (b), (c) and (d) thereof,
Whereas:
(1) Annex IX to Regulation (EU) 2018/1139 sets out essential requirements for the maintenance of unmanned aircraft,
in particular those which may be subject to certification referred to in Article 56(1) of that Regulation.
(2) Article 40 of Commission Delegated Regulation (EU) 2019/945(2)provides that unmanned aircraft systems (‘UAS’)
intended to be operated in the ‘specific’ category referred to in Article 5 of Commission Implementing Regulation
(EU) 2019/947(3)for which the risk of the operation cannot be adequately mitigated, are to be certified and comply
with detailed requirements in respect of their continuing airworthiness.
(3) Taking into account the specific nature of UAS it is necessary to establish detailed dedicated continuing
airworthiness requirements for those UAS, their components, and for organisations and personnel involved in
continuing airworthiness tasks.
(4) In accordance with Article 4(2) of Regulation (EU) 2018/1139, the detailed requirements for UAS should be
proportionate to the risk of the particular operation or type of operation required by Implementing Regulation
(EU) 2019/947 for high-risk operations in the ‘specific’ category.
(5) Those detailed requirements for the UAS continuing airworthiness should be based on and harmonised with the
detailed requirements laid down in Commission Regulation (EU) No 1321/2014(4) applicable to light aircraft in
manned aviation, however, those detailed requirements for the UAS should be adapted and adjusted in order to
ensure that they are appropriate for the specific nature of UAS and are proportionate to the risks posed by their
operation.
(1) OJ L 212, 22.8.2018, p. 1, ELI: http://data.europa.eu/eli/reg/2018/1139/oj.
(2) Commission Delegated Regulation (EU) 2019/945 of 12 March 2019 on unmanned aircraft systems and on third-country operators of
unmanned aircraft systems (OJ L 152, 11.6.2019, p. 1, ELI: http://data.europa.eu/eli/reg_del/2019/945/oj).
(3) Commission Implementing Regulation (EU) 2019/947 of 24 May 2019 on the rules and procedures for the operation of unmanned
aircraft (OJ L 152, 11.6.2019, p. 45, ELI: http://data.europa.eu/eli/reg_impl/2019/947/oj).
(4) Commission Regulation (EU) No 1321/2014 of 26 November 2014 on the continuing airworthiness of aircraft and aeronautical
products, parts and appliances, and on the approval of organisations and personnel involved in these tasks (OJ L 362, 17.12.2014,
p. 1, ELI: http://data.europa.eu/eli/reg/2014/1321/oj).
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 1/37EN
OJ L, 23.5.2024
(6) Where a valid certificate of airworthiness is not available and a permit to fly is issued to an UAS, those detailed
requirements should not apply, and instead the continuing airworthiness requirements established in the flight
conditions approved in accordance with Commission Regulation (EU) No 748/2012(5)should apply.
(7) It is necessary to provide for a smooth transition to the new regulatory framework established by this Regulation.
Therefore, it is necessary to provide stakeholders and Member State administrations with sufficient time to adapt to
and ensure compliance with this new regulatory framework.
(8) The requirements for the protection of information and communication systems and data established for the
continuing airworthiness organisations should be deferred until Commission Implementing Regulation
(EU) 2023/203(6)becomes applicable.
(9) The European Union Aviation Safety Agency has submitted to the Commission Opinion No 03/2023(7) in
accordance with Article 75(2), points (b) and (c), of Regulation (EU) 2018/1139 and with Article 76(1) of that
Regulation,
HAS ADOPTED THIS REGULATION:
Article 1
Subject matter and scope
This Regulation establishes common technical requirements and administrative procedures to ensure the continuing
airworthiness of unmanned aircraft systems (‘UAS’), including any component for installation thereto, where the
unmanned aircraft is, or will be, registered in a Member State, and is intended to be operated in the ‘specific’ category as
defined in Article 5 of Implementing Regulation (EU) 2019/947 and a certificate of airworthiness or a restricted certificate
of airworthiness has been or will be issued to the unmanned aircraft.
Article 2
Definitions
For the purposes of this Regulation, the following definitions apply:
(1) ‘unmanned aircraft system’ means an unmanned aircraft, as defined in Article 3, point (30), of Regulation
(EU) 2018/1139, and its control and monitoring unit;
(2) ‘control and monitoring unit’ means the equipment to control unmanned aircraft remotely, as defined in Article 3,
point (32), of Regulation (EU) 2018/1139;
(3) ‘certifying staff’ means the personnel responsible for the certification of maintenance upon its completion;
(4) ‘component’ means any engine, propeller or part of the unmanned aircraft, or any element of the control and
monitoring unit;
(5) Commission Regulation (EU) No 748/2012 of 3 August 2012 laying down implementing rules for the airworthiness and
environmental certification of aircraft and related products, parts and appliances, as well as for the certification of design and
production organisations (OJ L 224, 21.8.2012, p. 1, ELI: http://data.europa.eu/eli/reg/2012/748/oj).
(6) Commission Implementing Regulation (EU) 2023/203 of 27 October 2022 laying down rules for the application of Regulation
(EU) 2018/1139 of the European Parliament and of the Council, as regards requirements for the management of information security
risks with a potential impact on aviation safety for organisations covered by Commission Regulations (EU) No 1321/2014, (EU)
No 965/2012, (EU) No 1178/2011, (EU) 2015/340, Commission Implementing Regulations (EU) 2017/373 and (EU) 2021/664, and
for competent authorities covered by Commission Regulations (EU) No 748/2012, (EU) No 1321/2014, (EU) No 965/2012, (EU)
No 1178/2011, (EU) 2015/340 and (EU) No 139/2014, Commission Implementing Regulations (EU) 2017/373 and (EU) 2021/664
and amending Commission Regulations (EU) No 1178/2011, (EU) No 748/2012, (EU) No 965/2012, (EU) No 139/2014, (EU)
No 1321/2014, (EU) 2015/340, and Commission Implementing Regulations (EU) 2017/373 and (EU) 2021/664 (OJ L 31, 2.2.2023,
p. 1, ELI: http://data.europa.eu/eli/reg_impl/2023/203/oj).
(7) https://www.easa.europa.eu/en/document-library/opinions
2/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
(5) ‘continuing airworthiness’ means all of the processes ensuring that, at any time in its operating life, the unmanned
aircraft system complies with the applicable airworthiness requirements and is in a condition for safe operation;
(6) ‘maintenance’ means any one or a combination of the following activities: overhaul, repair, inspection, replacement,
modification or defect rectification of an unmanned aircraft system or component, with the exception of pre-flight
inspection;
(7) ‘organisation’ means a natural person, a legal person or part of a legal person, established at more than one location
whether or not within the territory of the Member States;
(8) ‘pre-flight inspection’ means the inspection carried out before flight to ensure that the unmanned aircraft is fit for
the intended flight;
(9) ‘principal place of business’ means the head office or the registered office of the undertaking from which the
principal financial functions and the operational control of the activities referred to in this Regulation are exercised;
(10) ‘critical maintenance task’ means a maintenance task that involves the assembly or any disturbance of a system or
any component on an unmanned aircraft system, engine or propeller that, if an error occurred during its
performance, could directly endanger the flight safety;
(11) ‘control and monitoring unit installation’ means the process to integrate the control and monitoring unit’s elements
in a physical environment that is eligible for that purpose according to a set of installation and testing instructions,
such that the installed control and monitoring unit may be used to operate an unmanned aircraft.
Article 3
Continuing airworthiness requirements
1. The continuing airworthiness of UAS referred to in Article 1 and the components for installation thereon shall be
ensured in accordance with Annex I (Part-ML.UAS) to this Regulation.
2. By way of derogation from paragraph 1, the continuing airworthiness of UAS referred to in Article 1, for which a
permit to fly has been issued shall be ensured on the basis of specific continuing airworthiness arrangements defined in
the approved flight conditions of the permit to fly issued in accordance with Subpart P of Annex I (Part 21) to Regulation
(EU) No 748/2012.
Article 4
Approvals for organisations involved in the continuing airworthiness of UAS
An organisation that is involved in the continuing airworthiness of UAS referred to in Article 1 and of components for
installation thereon, including their maintenance, shall comply with Annex II (Part-CAO.UAS) and obtain the related
approval certificate from the competent authority specified in Commission Implementing Regulation (EU) 2024/1109(8).
Article 5
Certifying staff
Certifying staff shall be qualified in accordance with Annex II (Part-CAO.UAS).
(8) Commission Implementing Regulation (EU) 2024/1109 of 10 April 2024 laying down rules for the application of Regulation
(EU) 2018/1139 of the European Parliament and of the Council as regards competent authority requirements and administrative
procedures for the certification, oversight and enforcement of the continuing airworthiness of certified unmanned aircraft systems,
and amending Implementing Regulation (EU) 2023/203 (OJ L, 2024/1109, 17.5.2024, ELI: http://data.europa.eu/eli/reg_impl/2024/
1109/oj).
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 3/37EN
OJ L, 23.5.2024
Article 6
Entry into force and application
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the
European Union.
It shall apply from 1 May 2025.
However, point CAO.UAS.102 of Annex II (Part-CAO.UAS) shall apply from 22 February 2026.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 13 March 2024.
For the Commission
The President
Ursula VON DER LEYEN
4/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
ANNEX I
(PART-ML.UAS)
CONTENTS
ML.UAS.1
SUBPART A – GENERAL
ML.UAS.101 Scope
SUBPART B – ACCOUNTABILITY
ML.UAS.201 Responsibilities
SUBPART C – CONTINUING AIRWORTHINESS
ML.UAS.301 Continuing airworthiness tasks
ML.UAS.302 UAS maintenance programme
ML.UAS.303 Airworthiness directives (‘ADs’)
ML.UAS.304 Modifications and repairs
ML.UAS.305 UAS continuing airworthiness record system
ML.UAS.307 Transfer of UAS continuing airworthiness records
SUBPART D – MAINTENANCE STANDARDS
ML.UAS.401 Maintenance data
ML.UAS.403 UAS defects
SUBPART E – COMPONENTS
ML.UAS.501 Installation of UA components
ML.UAS.502 Maintenance of UA components
ML.UAS.504 Segregation of components
ML.UAS.520 Installation and maintenance of CMU components
SUBPART H – CERTIFICATE OF RELEASE TO SERVICE (‘CRS’)
ML.UAS.801 Certification of UA maintenance
ML.UAS.802 Certification of UA component maintenance
ML.UAS.803 Certification of CMU maintenance
ML.UAS.804 Certification of CMU component maintenance
ML.UAS.805 Certification of CMU installation
SUBPART I – AIRWORTHINESS REVIEW CERTIFICATE (‘ARC’)
ML.UAS.901 Airworthiness review of the UA – General
ML.UAS.902 Validity of the UA ARC
ML.UAS.903 Airworthiness review process
ML.UAS.905 Transfer of an UA registration within the Union
ML.UAS.906A Airworthiness review of UA imported into the Union
ML.UAS.906B Airworthiness review following changes in UAS operations
ML.UAS.907 Findings
Appendix 1 – Continuing airworthiness management contract
Appendix 2 – Airworthiness review certificate (EASA Form 15d)
Appendix 3 – EASA Form 1 fill-in instructions
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 5/37EN
OJ L, 23.5.2024
ML.UAS.1
(a) For the purposes of this Annex, ‘competent authority’ shall mean the authority specified in point AR.UAS.GEN.010(a)
of Annex I (Part-AR.UAS) to Implementing Regulation (EU) 2024/1109.
(b) For the purposes of this Annex, ‘owner of the UA’ shall mean one of the following:
(1) the registered owner of the UA, which may be the UAS operator itself;
(2) the UAS operator being the lessee of the UA, provided point ML.UAS.201(b) applies.
SUBPART A
GENERAL
ML.UAS.101 Scope
This Annex establishes the measures to be taken by the persons and organisations to ensure that the UAS operated in the
‘specific’ category as defined in Article 5 of Implementing Regulation (EU) 2019/947, and for which an airworthiness
certificate has been or will be issued to the UA in accordance with Article 7(2) of Implementing Regulation
(EU) 2019/947, is airworthy. It also specifies the conditions to be met by the persons or organisations involved in the tasks
related to the airworthiness of that UAS.
SUBPART B
ACCOUNTABILITY
ML.UAS.201 Responsibilities
(a) The owner of the UA shall be accountable for the continuing airworthiness of the UAS and shall ensure that no flight
takes place unless all the following requirements are met:
(1) the UAS is maintained in an airworthy condition;
(2) any operational and emergency equipment fitted to the UAS is correctly installed and serviceable, or if that
equipment is unserviceable, it is clearly identified as such;
(3) the UA airworthiness certificate is valid.
(b) By way of derogation from point (a), when the UA is leased, the accountability set out in point (a) shall apply to the
lessee, provided that the lessee is identified in the registration document of the UA or such transfer of accountability is
detailed in the leasing contract.
(c) Any person or organisation that performs maintenance on the UAS and its components shall be responsible for the
maintenance tasks performed.
(d) The UAS operator shall be responsible for the satisfactory accomplishment of the pre-flight inspection. The person
carrying out that inspection on behalf of the UAS operator shall be qualified for that purpose. The pre-flight
inspection need not be carried out by an approved maintenance organisation or by certifying staff.
(e) In addition to the requirements laid down in point (a), the owner of the UA shall ensure that:
(1) the tasks associated with the continuing airworthiness management of the UAS are performed by an organisation
that is approved in accordance with Annex II (Part-CAO.UAS) and has its principal place of business in a territory
to which the Treaties apply.
If a Part-CAO.UAS organisation is contracted by the owner of the UA as regards the performance of those tasks, a
written contract shall be established in accordance with Appendix 1. That contracted organisation shall assume
responsibility for the proper performance of those tasks;
6/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
(2) unless otherwise specified in Subpart E, the maintenance of the UAS and the components for installation thereto is
performed by an organisation that is approved in accordance with Annex II (Part-CAO.UAS) and has its principal
place of business in a territory to which the Treaties apply.
(f) To determine whether the UAS complies with the requirements of this Annex, the owner of the UA shall ensure that
access to the UAS and UAS records is granted to any person authorised by the competent authority.
SUBPART C
CONTINUING AIRWORTHINESS
ML.UAS.301 Continuing airworthiness tasks
The continuing airworthiness of the UAS and the serviceability of operational and emergency equipment shall be ensured
by the following:
(a) the accomplishment of pre-flight inspections of the UA;
(b) the performance of unscheduled maintenance and the rectification of defects (including damages) in accordance with
the data specified in points ML.UAS.401 and ML.UAS.304, as applicable, while taking into account the minimum
equipment list (‘MEL’) and the configuration deviation list (‘CDL’), when they exist;
(c) the accomplishment of all scheduled maintenance in accordance with the UAS maintenance programme referred to in
point ML.UAS.302;
(d) compliance with any applicable:
(1) airworthiness directive (‘AD’) issued or adopted by the European Union Aviation Safety Agency;
(2) operational requirements with a continuing airworthiness impact;
(3) continuing airworthiness requirements mandated by the Agency;
(4) measure required by the competent authority in immediate reaction to a safety problem;
(e) the accomplishment of modifications and repairs in accordance with point ML.UAS.304;
(f) maintenance check flights (‘MCFs’), when necessary;
(g) the availability of the mass and balance statement reflecting the current configuration of the UA, when such
information is produced by the UA manufacturer.
ML.UAS.302 UAS maintenance programme
(a) The scheduled maintenance of the UAS shall be organised in accordance with an UAS maintenance programme.
(b) The UAS maintenance programme, and any subsequent amendments to it, shall be approved by the Part-CAO.UAS
organisation that is responsible for managing the continuing airworthiness of the UAS.
(c) The UAS maintenance programme shall comply with:
(1) the mandatory continuing airworthiness information, such as repetitive ADs, the airworthiness limitations section
(‘ALS’) of the instructions for continuing airworthiness (‘ICAs’), and specific maintenance requirements contained
in the type-certificate data sheet (‘TCDS’);
(2) the ICAs issued by the design approval holder (DAH);
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 7/37EN
OJ L, 23.5.2024
(d) Notwithstanding point (c)(1), by way of derogation from point (c)(2), the UAS maintenance programme may deviate
from the ICAs, based on data obtained from reviews performed in accordance with point (f).
(e) The UAS maintenance programme shall take into account the UAS configuration, and the type and specificities of
operations.
(f) The UAS maintenance programme shall be reviewed at least annually in order to assess its effectiveness while
considering new or modified ICAs.
ML.UAS.303 Airworthiness directives (‘ADs’)
Any applicable AD must be applied according to the requirements of that AD unless otherwise specified by the Agency.
ML.UAS.304 Modifications and repairs
(a) Any damage to an UAS or to a component for installation thereto shall be assessed before being repaired.
(b) Carrying out modifications and repairs on the UAS or its components shall require such modifications and repairs to
be either:
(1) approved by the Agency; or
(2) approved by a design organisation that complies with Annex I (Part 21) to Regulation (EU) No 748/2012; or
(3) contained in the requirements of point 21.A.90B or point 21.A.431B of Annex I (Part 21) to Regulation (EU)
No 748/2012.
ML.UAS.305 UAS continuing airworthiness record system
(a) For each UAS, as identified by the UA registration and control and monitoring unit (‘CMU’) type and serial number, a
system shall be established to record continuing airworthiness information of the UAS. That system shall be used by
the remote pilot and the person(s) involved in the continuing airworthiness of the UAS.
(b) The UAS continuing airworthiness record system shall record the following:
(1) the date of the entry and the corresponding total usage, in the parameter(s) relevant to the UAS (e.g. flight hours,
calendar time or cycles);
(2) details of the maintenance performed on the UAS, in particular all certificates of release to service required by
points ML.UAS.801 or ML.UAS.803;
(3) details of the CMU installation, in particular the certificate of release to service (‘CRS’) required by
point ML.UAS.805, when such installation is prescribed by the design approval holder (DAH);
(4) evidence confirming the satisfactory accomplishment of the UA pre-flight inspection;
(5) information considered necessary to ensure continued flight safety;
(6) the current mass and balance statement, when such information is produced by the UA manufacturer;
(7) any other data necessary to demonstrate compliance with point (g).
(c) With respect to components subject to airworthiness limitations, in addition to the authorised release document
(EASA Form 1 or equivalent), the following information shall be entered in the record system:
(1) the designation and identification of the component(s);
(2) the type, serial number and registration, as appropriate, of the UA, the CMU or the component to which the
particular component has been fitted, along with the reference to the maintenance records relevant to its
installation and removal;
8/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
(3) the date of the entry and the corresponding component’s accumulated total usage, in the parameter(s) relevant to
the particular component;
(d) Each entry shall be made as soon as possible following the completion of the task so that it provides an up-to-date
status to the remote pilot.
(e) All entries made in the UAS continuing airworthiness records shall be clear and accurate. When it is necessary to
correct an entry, the correction shall be made in a manner that clearly shows the original entry.
(f) The record system shall include logs for the UA, the CMU and, as appropriate, for the components that are subject to
airworthiness limitations.
(g) The UAS continuing airworthiness record system shall be able to provide:
(1) the current status of ADs and measures mandated by the competent authority in immediate reaction to a safety
problem;
(2) the current status of modifications and repairs;
(3) the current status of compliance with the UAS maintenance programme;
(4) the current status of components that are subject to airworthiness limitations;
(5) the current list of deferred maintenance.
(h) The records shall be kept for the periods specified below:
(1) for the records specified in points (b)(2) and (b)(3), until the time the information contained in the records is
superseded by new information equivalent in scope and detail but not less than 36 months after the maintenance
or, as applicable, the CMU installation, has been released;
(2) for the records specified in points (b)(1), (b)(7) and point (c), for at least 12 months after the UAS or the
component has been permanently withdrawn from service;
(3) for the records specified in points (b)(4) to (b)(6), not less than 36 months after the entry into the record system;
(4) if not superseded, the records referred to in point (h)(1) shall be kept for 12 months after the UA or the CMU has
been permanently withdrawn from service.
ML.UAS.307 Transfer of UAS continuing airworthiness records
(a) When an UA is permanently transferred from one owner to another, the relevant continuing airworthiness records
referred to in point ML.UAS.305 shall also be transferred.
(b) When the owner of the UA contracts the continuing airworthiness management tasks to a Part-CAO.UAS organisation,
the owner of the UA shall ensure that the continuing airworthiness records referred to in point ML.UAS.305 are
transferred to the contracted organisation.
(c) The periods for the retention of the records set out in point ML.UAS.305(h) shall continue to apply to the new owner
or Part-CAO.UAS organisation.
SUBPART D
MAINTENANCE STANDARDS
ML.UAS.401 Maintenance data
(a) Maintenance on the UAS shall require the use of and adherence to current applicable maintenance data.
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 9/37EN
OJ L, 23.5.2024
(b) For the purposes of this Annex, ‘applicable maintenance data’ means any of the following:
(1) any applicable requirement, procedure, standard or information issued by the competent authority or the Agency;
(2) any applicable AD;
(3) the applicable ICAs and other maintenance instructions issued by the type-certificate holder, supplementary type-
certificate holder and any other organisation that publishes such data in accordance with Annex I (Part 21) to
Regulation (EU) No 748/2012;
(4) for components approved for installation by the design approval holder (‘DAH’), the applicable maintenance
instructions published by the component manufacturer and acceptable to the DAH.
ML.UAS.403 UAS defects
(a) Any UAS defect that seriously endangers the flight safety shall be rectified before further flight.
(b) The following persons may decide that a defect does not seriously endanger flight safety, and may defer its rectification
accordingly:
(1) the remote pilot or the authorised certifying staff in respect of defects that affect non-required UAS equipment;
(2) the remote pilot or the authorised certifying staff when using the MEL or the CDL in respect of defects that affect
required UAS equipment;
(3) the authorised certifying staff in respect of defects other than those referred to in points (b)(1) and (b)(2).
(c) Any UAS defect that does not seriously endanger flight safety shall be rectified as soon as practicable from the date on
which the defect was first identified and within the time limits specified in the maintenance data or the MEL.
(d) Any defect that is not rectified before flight shall be recorded in the UAS continuing airworthiness record system
referred to in point ML.UAS.305, and a record shall be made available to the remote pilot.
SUBPART E
COMPONENTS
ML.UAS.501 Installation of UA components
(a) Unless otherwise specified in Annex II (Part-CAO.UAS) or in point 21.A.307 of Annex I (Part 21) to Regulation (EU)
No 748/2012, a component may be fitted to an UA only if all the following conditions are met:
(1) it is in a satisfactory condition;
(2) it has been appropriately released to service using an EASA Form 1 as set out in Appendix II to Annex I (Part-M) to
Regulation (EU) No 1321/2014 or equivalent;
(3) it has been marked in accordance with Subpart Q of Annex I (Part 21) to Regulation (EU) No 748/2012.
(b) Prior to the installation of a component on an UA, the maintenance organisation shall ensure that the particular
component is eligible to be fitted taking into account the UA configuration and any applicable AD.
(c) Standard parts shall be fitted to an UA or to a component only when the maintenance data specifies those particular
standard parts, when accompanied by evidence of conformity to the applicable standard, and when they have
appropriate traceability.
10/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
(d) Raw or consumable materials shall only be used on an UA or a component provided that:
(1) the aircraft or component manufacturer allows for the use of such raw or consumable materials in relevant
maintenance data;
(2) such materials meet the required material specifications and have appropriate traceability;
(3) such materials are accompanied by documentation that clearly relates to those particular materials and contains a
statement of conformity to applicable specifications, and also the manufacturing and supplier source.
ML.UAS.502 Maintenance of UA components
(a) The maintenance of UA components shall be certified in accordance with the following table:
Certified using an EASA Form 1 (as set out in Certified together with UA maintenance in accor
Appendix II to Annex I (Part-M) to Regulation (EU) dance with point ML.UAS.801 (not possible to issue
No 1321/2014) an EASA Form 1)
Components maintained in accordance with component maintenance data (data issued by the component
manufacturer)
Maintenance other than For engines: Engine-rated maintenance UA maintenance organisations
overhaul organisations
For other components: component-rated
maintenance organisations
Overhaul of components Component-rated maintenance organisa Not possible
other than engines tions
Overhaul of engines Engine-rated maintenance organisations UA maintenance organisations if foreseen by
the design approval holder
Components maintained in accordance with UA maintenance data (data issued by the UA manufacturer)
All components and all Engine-rated (for engines) or component- UA maintenance organisations
types of maintenance rated (for other components) maintenance
organisations
(b) The components referred to in points (b)(3) to (b)(6) of point 21.A.307 of Annex I (Part 21) to Regulation (EU)
No 748/2012 may be maintained by any person or organisation. In such case, by way of derogation from point (a),
the maintenance of those components shall be released with a ‘declaration of maintenance accomplished’ issued by
the person or organisation that has performed the maintenance. The ‘declaration of maintenance accomplished’ shall
contain at least basic details of the maintenance performed, the date on which the maintenance was completed, and
the identification of the organisation or the person that issues it. It shall be considered a maintenance record and
equivalent to an EASA Form 1 in respect of the maintained component.
ML.UAS.504 Segregation of components
(a) Unserviceable and unsalvageable components shall be segregated from serviceable components, standards parts, and
materials.
(b) A component shall be considered unserviceable in any of the following circumstances:
(1) upon reaching the component’s limitation as defined in the UAS maintenance programme;
(2) non-compliance with applicable ADs and other continuing airworthiness requirements mandated by the Agency;
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 11/37EN
OJ L, 23.5.2024
(3) absence of the necessary information to determine the airworthiness status of the component or its eligibility for
installation;
(4) evidence of component defects or malfunctions;
(5) involvement of the component in an incident or accident that has likely affected its serviceability.
(c) Components which have reached their certified life limits or contain a non-repairable defect or malfunction shall be
classified as unsalvageable and shall not be permitted to re-enter the component supply system unless their certified
life limits have been extended or a repair solution has been approved in accordance with point ML.UAS.304.
ML.UAS.520 Installation and maintenance of CMU components
(a) Components shall be installed on a CMU only when the maintenance data specifies those components and when they
are in a satisfactory condition.
(b) Notwithstanding point (a), critical CMU components referred to in point 21.A.308(a) of Annex I (Part 21) to
Regulation (EU) No 748/2012 shall be installed on the CMU only if accompanied by an EASA Form 1 or equivalent,
and marked in accordance with Subpart Q of Annex I (Part 21) to Regulation (EU) No 748/2012.
(c) Notwithstanding point (a), CMU components that are not deemed critical shall be installed on the CMU only if
accompanied by the declaration specified in point 21.A.308(b) of Annex I (Part 21) to Regulation (EU) No 748/2012,
or equivalent.
(d) The maintenance of critical CMU components shall be performed by a maintenance organisation approved in
accordance with Annex II (Part-CAO.UAS) and shall be certified on an EASA Form 1 as set out in Appendix II to
Annex I (Part-M) to Regulation (EU) No 1321/2014.
(e) CMU components that are not deemed critical may be maintained by any person or organisation. The maintenance of
those components shall be released with a ‘declaration of maintenance accomplished’ issued by the person or
organisation that has performed the maintenance. That declaration shall contain at least basic details of the
maintenance performed, the date on which the maintenance was completed, and the identification of the organisation
or the person that issues it. It shall be considered a maintenance record and equivalent to the declaration referred to in
point 21.A.308(b) of Annex I (Part 21) to Regulation (EU) No 748/2012 for the purpose of installation.
(f) By way of derogation from points (d) and (e), where the CMU components are subject to maintenance while they are
installed on, or temporarily removed from, the CMU, such maintenance may be certified together with the CMU
maintenance in accordance with point ML.UAS.803.
SUBPART H
CERTIFICATE OF RELEASE TO SERVICE (CRS)
ML.UAS.801 Certification of UA maintenance
(a) When completed, the maintenance performed on an UA shall be certified on a ‘certificate of release to service’ (‘CRS’)
by a certifying staff. The CRS shall be issued when that certifying staff has verified that all the maintenance that was
ordered has been properly performed taking into account the availability and use of the maintenance data specified in
point ML.UAS.401.
(b) A CRS shall contain at least the following:
(1) basic details of the UA maintenance performed;
(2) the date on which the UA maintenance was certified;
(3) the approval reference of the maintenance organisation and certifying staff issuing the CRS;
(4) the limitations to airworthiness or operations, if any.
12/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
(c) By way of derogation from point (a), when ordered maintenance cannot be completed, a CRS may be issued within the
approved UA limitations. In that case, the CRS shall indicate that the maintenance could not be completed, and also
indicate any applicable airworthiness or operations limitations as part of the information required in point (b)(4).
(d) A CRS shall not be issued in the case of any known non-compliance with the requirements of this Annex which
endangers flight safety.
ML.UAS.802 Certification of UA component maintenance
(a) When completed, the maintenance performed on an UA component shall be certified by a certifying staff except for
the cases covered by point ML.UAS.502(b). The certification shall be issued when that certifying staff has verified that
all the maintenance that was ordered has been properly performed taking into account the availability and use of the
maintenance data specified in point ML.UAS.401 and that the component is in a satisfactory condition.
(b) That certification shall be established on an EASA Form 1, except when such maintenance is certified together with UA
maintenance, as indicated in point ML.UAS.502(a).
(c) The EASA Form 1 referred to in point (b) shall be filled in accordance with the instructions provided in Appendix 3. It
may be generated from a computer database.
ML.UAS.803 Certification of CMU maintenance
(a) When completed, the maintenance performed on the CMU that involves any component which is critical for the UAS
operation as determined by the DAH, shall be certified on a CRS by a certifying staff. The CRS shall be issued when that
certifying staff has verified that all the maintenance that was ordered has been properly performed taking into account
the availability and use of the maintenance data specified in point ML.UAS.401.
(b) A CRS shall contain at least the following:
(1) basic details of the CMU maintenance performed;
(2) the date on which the CMU maintenance was certified;
(3) the approval reference of the maintenance organisation and certifying staff issuing the CRS;
(4) the limitations to airworthiness or operations, if any.
(c) A CRS shall not be issued in the case of any known non-compliance with the requirements of this Annex which
endangers flight safety.
ML.UAS.804 Certification of CMU component maintenance
(a) When completed, the maintenance performed on a CMU component in accordance with point ML.UAS.520(d) shall be
certified by a certifying staff. The certification shall be issued when that certifying staff has verified that all the
maintenance that was ordered has been properly performed taking into account the availability and use of the
maintenance data specified in point ML.UAS.401 and that the component is in a satisfactory condition.
(b) That certification shall be established on an EASA Form 1, except when such maintenance is certified together with
CMU maintenance, as indicated in point ML.UAS.520(f).
(c) The EASA Form 1 referred to in point (b) shall be filled in accordance with the instructions provided in Appendix 3. It
may be generated from a computer database.
ML.UAS.805 Certification of CMU installation
(a) If prescribed by the DAH, the installation of the CMU, when completed, shall be certified on a ‘certificate of release to
service’ (CRS) by a certifying staff. The CRS shall be issued when that certifying staff has verified that all the current
applicable installation and testing instructions issued by the DAH have been properly complied with, taking into
account the CMU component installation requirements laid down in point ML.UAS.520.
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 13/37EN
OJ L, 23.5.2024
(b) A CRS shall include all the following:
(1) a reference to the CMU installation instructions;
(2) the date on which the CMU installation was certified;
(3) the approval reference of the maintenance organisation and certifying staff issuing the CRS;
(4) the limitations to airworthiness or operations, if any.
(c) A CRS shall not be issued in the case of any known non-compliance with the requirements of this Annex which
endangers flight safety.
SUBPART I
AIRWORTHINESS REVIEW CERTIFICATE (‘ARC’)
ML.UAS.901 Airworthiness review of the UA – General
To ensure the validity of the airworthiness certificate of an UA, the UA shall periodically undergo an airworthiness review
in accordance with point ML.UAS.903.
(a) An ARC is issued in accordance with Appendix 2 (EASA Form 15d) upon completion of a satisfactory airworthiness
review. The ARC shall be valid for 1 year.
(b) The airworthiness review shall be performed and the ARC issued in accordance with point ML.UAS.903 by:
(1) either airworthiness review staff acting on behalf of the competent authority; or
(2) airworthiness review staff acting on behalf of any Part-CAO.UAS organisation approved to conduct the
airworthiness review of such UA.
(c) The validity of an ARC may be extended two consecutive times maximum, for a period of 1 year each time, by the Part-
CAO.UAS organisation that manages the continuing airworthiness of the UAS, subject to the following conditions:
(1) the UAS has been continuously managed by one or several Part-CAO.UAS organisations since the last issue or
extension of the ARC;
(2) the UAS has been maintained for the previous 12 months by an approved Part-CAO.UAS maintenance
organisation;
(3) the Part-CAO.UAS organisation does not have any evidence or reason to believe that the UAS is not airworthy.
The extension of the ARC by a Part-CAO.UAS organisation is possible regardless of which staff or organisation, as
provided for in point (b), has initially issued the ARC.
(d) By way of derogation from point (c), the extension of the ARC may be anticipated for a maximum period of 30 days,
without losing the continuity of the airworthiness review pattern.
(e) When the competent authority performs the airworthiness review and issues the ARC itself, the owner of the UA shall,
upon request and as necessary, provide the competent authority with:
(1) the documentation required by the competent authority;
(2) suitable accommodation at the appropriate location for its staff;
(3) the support of appropriate certifying staff.
ML.UAS.902 Validity of the UA ARC
(a) An ARC shall become invalid if any of the following circumstances occurs:
(1) the ARC is suspended or revoked;
14/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
(2) the airworthiness certificate is invalid;
(3) the UA is not in the aircraft register of a Member State;
(4) the type certificate under which the airworthiness certificate has been issued is suspended or revoked.
(b) An UA shall not fly if the ARC is invalid, or if any of the following circumstances are present:
(1) the continuing airworthiness of the UA, the CMU or any component fitted to the UAS does not meet the
requirements of this Annex;
(2) the UA is intended to be operated with a CMU for which a non-compliance has been identified in respect of
point ML.UAS.903(b) and has not been eliminated;
(3) the UA or the CMU does not remain in conformity with the type design approved by the Agency;
(4) the UA has been operated beyond the limitations of the approved flight manual or airworthiness certificate,
without appropriate action being taken;
(5) the UA has been involved in an accident or incident that affects its airworthiness, without subsequent appropriate
action taken to restore its airworthiness;
(6) a modification or repair to the UAS or to any component fitted to the UAS does not comply with
point ML.UAS.304.
ML.UAS.903 Airworthiness review process
(a) The airworthiness review of an UA shall include a documented review of the UA continuing airworthiness records and
a physical survey of the UA.
(b) The airworthiness review referred to in point (a) shall also include a documented review of the records and a physical
survey of the CMU(s) used to operate the UA, unless such CMU has been included in the airworthiness review of an
UA of the same type in the last 6 months.
(c) Through the documented review of the UA and the CMU continuing airworthiness records, it shall be ensured that:
(1) the data required by point ML.UAS.305(b)(1) has been properly recorded;
(2) the flight manual is applicable to the UAS configuration and reflects the latest revision status;
(3) all the maintenance due on the UAS according to the UAS maintenance programme has been performed;
(4) all known defects have been rectified or deferred in accordance with point ML.UAS.403;
(5) all applicable ADs have been applied and properly included in the UAS records;
(6) all modifications and repairs made to the UAS have been included in the UAS records and comply with
point ML.UAS.304;
(7) all components that are subject to airworthiness limitations and installed on the UAS are properly identified,
included in the UAS records, and have not exceeded their approved airworthiness limitations;
(8) from the time the UA or the CMU falls within the scope of this Regulation, all maintenance has been certified in
accordance with the appropriate Annex to this Regulation;
(9) the current mass-and-balance statement reflects the configuration of the UA and is valid;
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 15/37EN
OJ L, 23.5.2024
(10) the UA and the CMU comply with the current applicable revision of their type design approved by the Agency;
(11) the airworthiness certificate is valid, unless an application for a new airworthiness certificate has been made
pursuant to point ML.UAS.906A or ML.UAS.906B and the airworthiness certificate has not been issued yet at
the time of the review.
(12) the noise certificate corresponds to the configuration of the UA and is valid, if such certificate has been issued
in compliance with Subpart I of Annex I (Part 21) to Regulation (EU) No 748/2012.
(d) Through the physical survey of the UA and the CMU, it shall be ensured that:
(1) all required markings and placards are properly installed;
(2) the UAS complies with its approved flight manual;
(3) the UAS configuration complies with the approved documentation;
(4) no evident defect can be found that has not been addressed in accordance with point ML.UAS.403;
(5) no inconsistencies can be found between the UAS and the documented review of records as referred to in point (c).
(e) As regards the physical survey referred to in point (d), airworthiness review staff not appropriately authorised as
certifying staff shall be assisted by authorised certifying staff.
(f) By way of derogation from point ML.UAS.901(a), the airworthiness review may be anticipated for a maximum period
of 90 days, without losing the continuity of the airworthiness review pattern.
(g) The ARC (EASA Form 15d) set out in Appendix 2 shall only be issued by appropriately authorised airworthiness
review staff, when the airworthiness review has been completely performed and all actions to eliminate the detected
non-compliance have been implemented.
(h) Any ARC issued or extended for an UA shall also be sent to the Member State of registry of the particular UA within 10
days.
(i) Airworthiness review tasks shall not be subcontracted.
ML.UAS.905 Transfer of an UA registration within the Union
(a) When transferring an UA registration within the Union, the applicant shall:
(1) firstly, provide the former Member State of registry with the name of the Member State in which the unmanned
aircraft will be registered;
(2) subsequently, apply to the new Member State of registry for the issue of a new airworthiness certificate in
accordance with Annex I (Part 21) to Regulation (EU) No 748/2012.
(b) Notwithstanding point (a)(3) of point ML.UAS.902, the former ARC shall remain valid until its expiry date.
(c) Notwithstanding point (b), an airworthiness review shall be performed satisfactorily in accordance with
point ML.UAS.903 if any of the following circumstances occurs:
(1) the aircraft was in a non-airworthy condition in the former Member State;
(2) the former ARC is invalid or has expired.
16/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
ML.UAS.906A Airworthiness review of UA imported into the Union
(a) When importing an UA into a Member State’s register from a third country or from a regulatory system where
Regulation (EU) 2018/1139 does not apply, the applicant shall:
(1) apply to the competent authority of the Member State of registry for the issue of a new airworthiness certificate in
accordance with Annex I (Part 21) to Regulation (EU) No 748/2012;
(2) for other than new UA, have an airworthiness review performed satisfactorily in accordance with
point ML.UAS.903;
(3) have all maintenance performed to comply with the approved UAS maintenance programme.
(b) If the UA complies with the relevant requirements, the competent authority or the organisation performing the
airworthiness review, as provided for in point ML.UAS.901(b), shall issue an ARC.
(c) The owner of the UA shall ensure that access to the UAS is granted for inspection by the competent authority of the
Member State of registry.
ML.UAS.906B Airworthiness review following changes in UAS operations
(a) If changes in the UAS operations in the ‘specific’ category result in the need to issue an airworthiness certificate in
accordance with Article 7(2) of Implementing Regulation (EU) 2019/947, the owner of the UA shall:
(1) apply to the competent authority of the Member State of registry for the issue of an airworthiness certificate in
accordance with Annex I (Part 21) to Regulation (EU) No 748/2012;
(2) have an airworthiness review performed satisfactorily in accordance with point ML.UAS.903;
(3) have all maintenance performed to comply with the approved UAS maintenance programme.
(b) If the UA complies with the relevant requirements, the competent authority or the organisation performing the
airworthiness review, as provided for in point ML.UAS.901(b), shall issue an ARC.
(c) The owner of the UA shall ensure that access to the UAS is granted for inspection by the competent authority of the
Member State of registry.
ML.UAS.907 Findings
Following receipt of the notification of findings from the competent authority in accordance with point AR.UAS.GEN.351
of Annex I (Part-AR.UAS) to Implementing Regulation (EU) 2024/1109, the person or organisation responsible for the UAS
continuing airworthiness pursuant to point ML.UAS.201 shall, within the period agreed with the competent authority,
define a corrective action plan (to eliminate the finding(s) and prevent its (their) reoccurrence) and demonstrate the
implementation of that plan to the competent authority.
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 17/37EN
OJ L, 23.5.2024
Appendix 1
Continuing airworthiness management contract
(a) When an owner of an UA contracts in accordance with point ML.UAS.201 a Part-CAO.UAS organisation to perform
continuing airworthiness management tasks, the contract signed by both parties shall be made available, upon
request, to the competent authority of the Member State of registry.
(b) The contract shall be developed taking into account the requirements of this Annex and shall define the obligations of
the signatories in relation to the continuing airworthiness of the UAS.
(c) It shall contain, as a minimum, the following information:
(1) the UA registration, type and serial number, and the details of the CMU;
(2) the UA owner’s or registered lessee’s name or company details, including the address;
(3) details of the contracted Part-CAO.UAS organisation, including its address;
(4) the type of operation.
(d) It shall state the following:
‘The owner of the UA entrusts the Part-CAO.UAS organisation with the management of the continuing airworthiness
of the UAS, the development and approval of the UAS maintenance programme, and the organisation of the
maintenance of the UAS in accordance with that UAS maintenance programme.
In accordance with the present contract, both signatories undertake to discharge the respective obligations laid down
in this contract.
The owner of the UA declares, to the best of its knowledge, that all the information provided to the Part-CAO.UAS
organisation concerning the continuing airworthiness of the UAS is and will be accurate, and that the UAS will not be
repaired or modified without the prior agreement of the Part-CAO.UAS organisation.
In case of any non-conformity with this contract by either of the signatories, the contract will be cancelled. In such a
case, the owner of the UA will retain full responsibility for every task linked to the continuing airworthiness of the
UAS, and the owner of the UA will inform the competent authoritie(s) of the Member State of registry within 2 weeks
about the cancellation of the contract.’
(e) When an owner of an UA contracts a Part-CAO.UAS organisation in accordance with point ML.UAS.201, the
obligations of each party shall be established as follows:
(1) Obligations of the Part-CAO.UAS organisation:
(i) have the type of UA and CMU included in its scope of work;
(ii) respect all the conditions listed below with regard to managing the continuing airworthiness of the UAS:
(A) develop and approve the UAS maintenance programme;
(B) once it has been approved, make the UAS maintenance programme available to the owner of the UA,
as well as the justifications for any deviations in accordance with point ML.UAS.302(d);
(C) establish and order the necessary maintenance to ensure appropriate bridging with the former UAS
maintenance programme;
(D) organise that all maintenance be performed by an approved maintenance organisation;
(E) organise that all applicable ADs be applied;
(F) organise that all defects discovered during maintenance, airworthiness reviews or reported by the
owner of the UA be corrected by an approved maintenance organisation;
(G) coordinate scheduled maintenance, the application of ADs, the maintenance of components subject to
airworthiness limitations, and component inspection requirements;
18/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
(H) inform the owner of the UA each time the UAS is to be made available to an approved maintenance
organisation;
(I) manage and archive all UAS continuing airworthiness records;
(iii) organise the approval of any modification to the UAS in accordance with point ML.UAS.304 before the
particular modification is embodied;
(iv) organise the approval of any repair to the UAS in accordance with point ML.UAS.304 before the particular
repair is performed;
(v) inform the competent authority of the Member State of registry whenever the UAS is not made available
by the owner for maintenance as requested by the contracted Part-CAO.UAS organisation;
(vi) inform the competent authority of the Member State of registry whenever the contract has not been
respected;
(vii) ensure that the airworthiness review of the UA is performed, when necessary, and ensure that the ARC is
issued;
(viii) provide any ARC issued or extended to the competent authority of the Member State of registry within 10
days;
(ix) perform occurrence reporting mandated by applicable regulations;
(x) inform the competent authority of the Member State of registry whenever the contract is denounced by
either party.
(2) Obligations of the owner of the UA:
(i) have a general understanding of the UAS maintenance programme;
(ii) have a general understanding of this Annex;
(iii) make the UAS available for maintenance as requested by the contracted Part-CAO.UAS organisation;
(iv) not modify the UAS without first consulting the contracted Part-CAO.UAS organisation;
(v) inform the contracted Part-CAO.UAS organisation of all maintenance exceptionally performed without the
knowledge and control of the contracted Part-CAO.UAS organisation;
(vi) report to the contracted Part-CAO.UAS organisation through the logs all defects found during operations;
(vii) inform the competent authority of the Member State of registry whenever the contract is denounced by
either party;
(viii) inform the competent authority of the Member State of registry and the contracted Part-CAO.UAS
organisation whenever the UA is sold;
(ix) perform occurrence reporting mandated by applicable regulations;
(x) inform on a regular basis the contracted Part-CAO.UAS organisation about the UA flying hours and any
other utilisation data, as agreed with the contracted Part-CAO.UAS organisation;
(xi) inform the Part-CAO.UAS organisation of any non-compliance with operational requirements that may
affect the continuing airworthiness of the UAS;
(xii) inform the Part-CAO.UAS organisation of any operational requirement (e.g. specific approvals) necessary
to be fulfilled in order to maintain the UAS in the required configuration.
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 19/37EN
OJ L, 23.5.2024
Appendix 2
Airworthiness review certificate (EASA Form 15d)
AIRWORTHINESS REVIEW CERTIFICATE (‘ARC’)
(for unmanned aircraft (UA) that comply with Part-ML.UAS)
ARC reference: ...........................................................................................
Pursuant to Regulation (EU) 2018/1139 of the European Parliament and of the Council,
[NAME OF THE COMPETENT AUTHORITY]
hereby certifies that:
□ it has performed an airworthiness review, in accordance with Annex I (Part-ML.UAS) to Commission
Delegated Regulation (EU) 2024/1107, of the following UA:
[or]
□ the following new UA:
UA manufacturer.............................. UA manufacturer designation: .............................
UA registration: ................................... UA serial number: ...................................
(and this aircraft) is considered airworthy at the time of the review.
Date of issue: ....................................... Expiry date: .......................................
UA flight hours (FHs) on the date of the review: ............................................................
Signed: .................................Authorisation No (if applicable): ................................
[OR]
[NAME OF APPROVED ORGANISATION, ADDRESS and APPROVAL REFERENCE](*)
hereby certifies that it has performed an airworthiness review, in accordance with Annex I (Part-ML.UAS) to
Commission Delegated Regulation (EU) 2024/1107, of the following UA:
UA manufacturer: ............................ UA manufacturer designation: ............................
UA registration.................................... UA serial number: .....................................
and this aircraft is considered airworthy at the time of the review.
Date of issue: ....................................... Expiry date: .......................................
UA flight hours (FHs) on the date of the review: ............................................................
Signed: .................................Authorisation No (if applicable): ................................
==============================================================================
First extension: The UA complies with the conditions of point ML.UAS.901(c) of Annex I (Part-ML.UAS) to
Commission Delegated Regulation (EU) 2024/1107.
Date of issue: ....................................... Expiry date: .......................................
UA flight hours (FHs) on the date of issue: .................................................................
Signed: ........................................Authorisation No: ........................................
Name of approved organisation: ...........................Approval reference: ..........................
20/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
==============================================================================
Second extension: The UA complies with the conditions of point ML.UAS.901(c) of Annex I (Part-ML.UAS)
to Commission Delegated Regulation (EU) 2024/1107.
Date of issue: ....................................... Expiry date: .......................................
UA flight hours (FHs) on the date of issue: .................................................................
Signed: ........................................Authorisation No: ........................................
Name of approved organisation: ...........................Approval reference: ..........................
(*) The issuer of the form may tailor it to their needs by deleting the name, the certifying statement, the reference to the
subject aircraft and the issuance details that are not relevant for their use.
EASA Form 15d – Issue 1
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 21/37EN
OJ L, 23.5.2024
Appendix 3
EASA Form 1 fill-in instructions
These instructions relate only to the use of the EASA Form 1, as specified in Appendix II to Annex I (Part-M) to Regulation
(EU) No 1321/2014, for UAS maintenance purposes.
Attention is drawn to the instructions specified in Appendix II to Annex I (Part-M) to Regulation (EU) No 1321/2014 which
cover the use of the EASA Form 1 for maintenance purposes in manned aviation, and the instructions specified in
Appendix I to Annex I (Part 21) to Regulation (EU) No 748/2012 which cover the use of the EASA Form 1 for production
purposes.
1. PURPOSE AND USE
1.1. The primary purpose of the certificate is to declare the airworthiness of the maintenance work performed on UAS
components (‘the item(s)’).
1.2. Correlation must be established between the certificate and the item(s). The originator must retain the certificate in a
form that allows the verification of the original data.
1.3. The certificate is acceptable to many airworthiness authorities, but may be dependent on the existence of bilateral
agreements and/or the policy of a particular airworthiness authority.
1.4. The certificate is not a delivery or shipping note.
1.5. UA are not to be released using the certificate.
1.6. The certificate does not constitute approval to install the item(s) but helps the end user determine its (their)
airworthiness approval status.
1.7. A mixture of production- and maintenance-released items is not permitted with the same certificate.
2. GENERAL FORMAT
2.1. The certificate must comply with the defined format, including block numbers, and the location of each block. The
size of each block may, however, be amended to suit the individual application, but not to the extent that would
render the certificate unrecognisable.
2.2. The certificate must be in ‘landscape’ orientation, but the overall size may be significantly increased or decreased as
long as the certificate remains recognisable and legible. If in doubt, please consult your competent authority.
2.3. The user/installer responsibility statement can be placed on either side of the form.
2.4. All printing must be clear and legible to allow easy reading.
2.5. The certificate may either be pre-printed or computer generated, but in either case the printing of lines and
characters must be clear and legible and in accordance with the defined format.
2.6. The certificate should be in English and, if appropriate, in one or more other languages.
2.7. The details to be entered on the certificate may be either machine/computer printed or handwritten, using capital
letters and must allow easy reading.
22/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
2.8. Limit the use of abbreviations to a minimum, to aid clarity.
2.9. The space remaining on the reverse side of the certificate may be used by the originator for any additional
information, but must not include any certification statement. Any use of the reverse side of the certificate must be
referenced in the appropriate block on the front side of the certificate.
3. ERROR(S) ON A CERTIFICATE
3.1. If an end user finds an error(s) on a certificate, the end user must inform in writing the originator. The originator
may issue a new certificate only if the error(s) can be verified and corrected.
3.2. The new certificate must have a new tracking number, signature, and date.
3.3. The request for a new certificate may be honoured without reverification of the item’s (items’) condition. The new
certificate is not a statement of the current condition and should refer to the previous certificate in Block 12 with
the following statement: ‘This certificate corrects the error(s) in Block(s) [enter block(s) corrected] of the certificate
[enter original tracking number] dated [enter original issue date], and does not cover conformity/condition/release
to service.’
Both certificates should be retained in accordance with the retention period associated to the first certificate.
4. COMPLETION OF THE CERTIFICATE BY THE ORIGINATOR
Block 1: Approving competent authority / country
State the name and the country of the competent authority under whose jurisdiction this certificate is issued. When
the competent authority is the Agency, only ‘EASA’ must be stated.
Block 2: EASA Form 1 header
‘AUTHORISED RELEASE CERTIFICATE
EASA FORM 1’
Block 3: Form Tracking Number
Enter the unique number established by the numbering system/procedure of the organisation identified in Block 4;
this may include alphanumeric characters.
Block 4: Organisation Name and Address
Enter the full name and address of the approved organisation that certifies the work covered by this certificate.
Logos, etc., are permitted provided they can be contained within the block.
Block 5: Work Order / Contract / Invoice
To facilitate customer traceability of the item(s), enter the work order number, contract number, invoice number, or
similar reference number.
Block 6: Item
Enter line item numbers when there is more than one line item. This block allows easy cross-referencing to the
Remarks in Block 12.
Block 7: Description
Enter the name or description of the item. Preference should be given to the term used in the instructions for
continuing airworthiness (‘ICAs’) or maintenance data (such as illustrated parts catalogue, aircraft maintenance
manual, service bulletin, component maintenance manual).
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 23/37EN
OJ L, 23.5.2024
Block 8: Part Number
Enter the part number as it appears on the item or tag/packaging. In case of an engine or propeller, the type
designation may be used.
Block 9: Quantity
State the quantity of items.
Block 10: Serial Number
If the item is required by applicable regulations to be identified with a serial number, enter it here. Additionally, any
other serial number not required by applicable regulations may also be entered. If there is no serial number identified
on the item, enter ‘N/A’.
Block 11: Status/Work
The following describes the permissible entries for Block 11. Enter only one of these terms – where more than one
may be applicable, use the one that most accurately describes the majority of the work performed and/or the status
of the article.
(i) Overhauled Means a process that ensures the item is in complete conformity with all applicable
service tolerances specified in the maintenance data. The item will be at least dis
assembled, cleaned, inspected, repaired as necessary, reassembled and tested in
accordance with the data specified above.
(ii) Repaired Rectification of defect(s) using an applicable standard(1).
(iii) Inspected/Tested Examination, measurement, etc., in accordance with an applicable standard(1)(e.g.
visual inspection, functional testing, bench testing, etc.).
(iv) Modified Alteration of an item to conform to an applicable standard(1)
(1) ‘Applicable standard’ means a manufacturing/design/maintenance/quality standard, method, technique or practice approved
by or acceptable to the competent authority. The applicable standard shall be described in Block 12.
Block 12: Remarks
Describe the work identified in Block 11, either directly or by reference to supporting documentation, necessary for
the user or installer to determine the airworthiness status of the item(s) in relation to the work being certified. If
necessary, a separate sheet may be used and referenced from the main EASA Form 1. Each statement must clearly
identify which item(s) in Block 6 it relates to.
Examples of information to be entered in Block 12 are as follows:
(i) maintenance data used, including revision status and reference;
(ii) compliance with airworthiness directives (ADs) or service bulletins (SBs);
(iii) repairs performed;
(iv) modifications performed;
(v) replacement parts installed;
(vi) status of life-limited parts;
(vii) deviations from the customer work order;
(viii) certification statements other than those referred to in point 145.A.50 of Annex II (Part-145) to Regulation
(EU) No 1321/2014;
(ix) information needed to support shipment with shortages or reassembly after delivery.
24/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
Include the following component CRS statement:
□ ‘Certifies that, unless otherwise specified in this block, the work identified in Block 11 and described in this
block has been accomplished in accordance with the requirements of Annex II (Part-CAO.UAS) to Delegated
Regulation (EU) 2024/1107, and in respect to that work the item is considered ready for release to service.’
If printing the data from an electronic EASA Form 1, any appropriate set of data that is not fit for other blocks
should be entered in this block.
Blocks 13a–13e
General requirements for Blocks 13a–13e: Not used for maintenance release. Shade, darken, or otherwise mark to
preclude inadvertent or unauthorised use.
Block 14a
Tick the box ‘other regulations specified in Block 12’ and enter the Part-CAO.UAS certification statement in Block
12. If the maintenance is also certified by the organisation under Annex II (Part-145) to Regulation (EU)
No 1321/2014, tick also the box ‘Part-145.A.50 Release to Service’.
If other regulations than Part-CAO.UAS and Part-145 are meant with the tick in the box ‘other regulations’, then
these regulations must be identified in Block 12. At least one box must be marked, or both boxes may be marked, as
appropriate.
The certification statement ‘unless otherwise specified in this block’ is intended to address the following cases:
(a) where maintenance could not be completed;
(b) where the accomplishment of the maintenance deviated from the relevant regulatory requirements;
(c) where maintenance has been performed in accordance with a requirement other than those specified in Part-
145 or in Part-CAO.UAS; in this case, Block 12 shall specify the particular regulation.
Block 14b: Authorised Signature
This block shall be completed with the signature of the authorised person. Only persons specifically authorised
under the rules and policies of the competent authority are permitted to sign this block. To aid recognition, a
unique number identifying the authorised person may be added.
Block 14c: Certificate/Approval Ref. No
Enter the certificate/approval number(s)/reference(s). Such number/reference is issued by the competent authority.
Block 14d: Name
Enter the name of the person that signs Block 14b in a legible form.
Block 14e: Date
Enter the date on which Block 14b is signed; the date must be in the format dd = 2-digit day, mmm = first 3 letters of
the month, yyyy = 4-digit year.
User/Installer Responsibilities
Place the following statement on the certificate to notify end users that they are not relieved of their responsibilities
concerning the installation and use of any item accompanied by the form:
‘This certificate does not automatically constitute authority to install the item(s).
Where the user/installer performs work in accordance with regulations of an airworthiness authority different than
the airworthiness authority specified in block 1, it is essential that the user/installer ensures that his/her
airworthiness authority accepts items from the airworthiness authority specified in block 1.
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 25/37EN
OJ L, 23.5.2024
Statements in blocks 13a and 14a do not constitute installation certification. In all cases aircraft maintenance
records must contain an installation certification issued in accordance with the national regulations by the user/
installer before the aircraft may be flown.’
26/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
ANNEX II
(PART-CAO.UAS)
CONTENTS
CAO.UAS.1 General
CAO.UAS.010 Scope
CAO.UAS.015 Application
CAO.UAS.017 Means of compliance
CAO.UAS.020 Scope of work and terms of approval
CAO.UAS.025 Organisation manual
CAO.UAS.030 Facilities and storage
CAO.UAS.035 Personnel requirements
CAO.UAS.040 Certifying staff
CAO.UAS.045 Airworthiness review staff
CAO.UAS.048 Staff issuing permits to fly
CAO.UAS.050 Components, equipment and tools
CAO.UAS.055 Maintenance data and work orders
CAO.UAS.060 Maintenance standards
CAO.UAS.065 Certification of UA maintenance
CAO.UAS.070 Certification of component maintenance
CAO.UAS.071 Certification of CMU maintenance
CAO.UAS.072 Certification of CMU installation
CAO.UAS.075 Continuing airworthiness management
CAO.UAS.080 Continuing airworthiness management data
CAO.UAS.085 Airworthiness review
CAO.UAS.086 Permit to fly
CAO.UAS.090 Record-keeping
CAO.UAS.095 Privileges of the organisation
CAO.UAS.100 Compliance monitoring and organisational review
CAO.UAS.102 Protection of information and communication systems and data
CAO.UAS.105 Changes to the organisation
CAO.UAS.110 Continued validity of an approval certificate
CAO.UAS.112 Access
CAO.UAS.115 Findings and observations
CAO.UAS.120 Occurrence reporting
CAO.UAS.1 General
For the purposes of this Annex:
(a) ‘competent authority’ shall be the authority specified in point AR.UAS.GEN.010(b) of Annex I (Part-AR.UAS) to
Implementing Regulation (EU) 2024/1109;
(b) ‘owner of the UA’ shall mean one of the following:
(1) the registered owner of the UA, which may be the UAS operator itself; or
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 27/37EN
OJ L, 23.5.2024
(2) the UAS operator being the lessee of the UA, provided point ML.UAS.201(b) of Annex I (Part-ML.UAS) applies.
CAO.UAS.010 Scope
With respect to UAS operated in the ‘specific’ category, as defined in Article 5 of Implementing Regulation (EU) 2019/947
and for which an airworthiness certificate has been issued to the UA in accordance with Article 7(2) of Regulation
(EU) 2019/947, this Annex sets out the requirements to be met by an organisation to qualify for the issue or continuation
of an approval certificate for the continuing airworthiness management or maintenance of the UAS and components, or a
combination of these activities.
CAO.UAS.015 Application
The organisation shall apply for the issue of, or a change to, a Part-CAO.UAS approval to the competent authority in a form
and manner established by that authority.
CAO.UAS.017 Means of compliance
(a) An organisation may use any alternative means of compliance to establish compliance with this Regulation.
(b) If an organisation wishes to use an alternative means of compliance, it shall, prior to using it, provide the competent
authority with a full description. The description shall include any revisions to manuals or procedures that may be
relevant, as well as an explanation indicating how compliance with this Regulation is achieved.
The organisation may use that alternative means of compliance subject to the prior approval by the competent
authority.
CAO.UAS.020 Scope of work and terms of approval
(a) For each of the privileges sought, the organisation shall specify the scope of work in its organisation manual, as
provided for in point CAO.UAS.025. The scope of work shall be an accurate description of the work performed by
the organisation.
(b) For UA and CMU maintenance, the scope of work shall include:
(1) the type or manufacturer of the UA and the CMU;
(2) the type and extent of maintenance work, including specialised tasks and methods, if any.
(c) For CMU installation, the scope of work shall include the type or manufacturer of the CMU.
(d) For continuing airworthiness management, the scope of work shall include:
(1) the type or manufacturer of the UA and the CMU;
(2) the identification of the UA and the CMU managed;
(3) the specification of which UA is used with which CMU.
(e) For airworthiness review and permit to fly, the scope of work shall include the type or manufacturer of the UA.
(f) For the maintenance of components other than complete engines, the scope of work shall be established in accordance
with the following classification:
(1) C1: UA air conditioning and pressurisation;
(2) C2: UA auto flight;
(3) C3: UA communications and navigation;
(4) C4: UA doors and hatches;
(5) C5: UA electrical power and lights;
(6) C6: UA equipment;
(7) C7: UA engine;
(8) C8: UA flight controls;
28/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
(9) C9: UA fuel systems;
(10) C10: UA rotors;
(11) C11: UA transmission;
(12) C12: UA hydraulic power;
(13) C13: UA indicating and recording system;
(14) C14: UA landing gear;
(15) C15: UA oxygen;
(16) C16: UA propellers;
(17) C17: UA pneumatic and vacuum systems;
(18) C18: UA protection from ice/rain/fire;
(19) C19: UA windows;
(20) C20: UA structural;
(21) C21: UA water ballast;
(22) C22: UA propulsion augmentation;
(23) C23: other UA components;
(24) C24: CMU components.
(g) For the maintenance of complete engines, the scope of work shall include the type or manufacturer of the engines.
(h) For the non-destructive testing (‘NDT’) privilege, when it forms part of the class ‘specialised services’, the scope of work
shall include the NDT methods.
(i) The organisation shall comply with the terms of approval attached to the organisation certificate issued by the
competent authority, and with the scope of work specified in the organisation manual.
CAO.UAS.025 Organisation manual
(a) The organisation shall establish and maintain a manual that specifies the necessary information and procedures for its
personnel to perform their duties and for the organisation to show how it complies with this Regulation.
(b) The manual shall include directly or by reference the following information:
(1) a statement signed by the accountable manager confirming that the organisation will at all times work in
accordance with the requirements of this Annex and the organisation manual;
(2) the detailed scope of work of the organisation for each privilege;
(3) an organisation chart identifying the title(s) and name(s) of the person(s) referred to in points (a), (b) and (c) of
point CAO.UAS.035, and showing the lines of responsibility between these persons;
(4) a general description and location of the facilities;
(5) the manual amendment procedure, as specified in point CAO.UAS.105(b),
and where the organisation intends to perform the activities mentioned in the following points:
(6) the scope of and procedures for work performed at a location other than the approved facilities;
(7) a list of certifying staff with their scope of authorisation;
(8) a list of staff responsible for the approval of the UAS maintenance programme;
(9) a list of airworthiness review staff with their scope of authorisation;
(10) a list of staff responsible for the issuance of permits to fly;
(11) the scope of and procedures for the maintenance on UA performed and certified remotely from the CMU.
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 29/37EN
OJ L, 23.5.2024
(c) The initial issue of the manual shall be approved by the competent authority.
(d) Amendments to the manual shall be handled in accordance with point CAO.UAS.105.
CAO.UAS.030 Facilities and storage
(a) The organisation shall ensure that the facilities to be used, including office accommodation, allow it to perform all
planned work.
(b) In addition, where the scope of approval of the organisation includes maintenance activities, the organisation shall
ensure that:
(1) specialised workshops, hangars and bays provide adequate protection from contamination and environmental
conditions;
(2) secure storage facilities are provided for components, equipment, tools and materials, while ensuring segregation
of components as required by point ML.UAS.504(a);
(3) relevant instructions for component storage are complied with, and access to the storage facilities is restricted only
to authorised personnel.
CAO.UAS.035 Personnel requirements
(a) The organisation shall appoint an accountable manager that has the authority to ensure that all activities of the
organisation can be financed and performed in accordance with this Regulation.
(b) The accountable manager shall nominate a person or group of persons with the responsibility to ensure that the
continuing airworthiness activities are performed in accordance with the organisation manual.
(c) The accountable manager shall nominate a compliance monitoring manager with the responsibility to manage the
compliance monitoring function referred to in point CAO.UAS.100.
(d) The persons nominated in accordance with points (b) and (c) shall have a responsibility to the accountable manager
and direct access to him/her. They shall be able to demonstrate appropriate knowledge, background and experience to
discharge their responsibilities.
(e) The organisation shall ensure that all personnel involved in continuing airworthiness activities have the appropriate
knowledge, background and experience, and remain competent for the work intended to be performed.
(f) The organisation shall have sufficient and appropriately qualified staff to allow it to perform the planned work.
(g) The organisation shall establish initial training for its maintenance staff to ensure they will perform the intended
maintenance safely.
(h) Personnel that perform specialised tasks, such as welding, or non-destructive testing (NDT) inspection other than
colour-contrast inspections, shall be qualified in accordance with an officially recognised standard.
CAO.UAS.040 Certifying staff
(a) In order to certify the maintenance on UA, CMU and components, or to certify CMU installation, the organisation shall
authorise relevant certifying staff for that purpose.
(b) Certifying staff that are intended to certify the maintenance on UA and CMU, or to certify CMU installation, shall
receive initial training relevant to the particular UA and CMU to be stated in the authorisation. The organisation shall
ensure that they have acquired a minimum of 3 months of practical maintenance experience with similar aircraft or
CMU, or 6 months of practical maintenance experience on aircraft or CMU being operated, before receiving their
certification authorisation.
(c) The organisation shall ensure that certifying staff periodically receive sufficient and adequate recurrent training to
ensure that they have up-to-date knowledge of relevant technologies, organisation procedures, and human factors
issues.
30/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
CAO.UAS.045 Airworthiness review staff
(a) In order to perform airworthiness reviews, the organisation shall authorise relevant airworthiness review staff that
shall comply with all the following requirements:
(1) they have acquired at least 1 year of experience in continuing airworthiness;
(2) they are authorised as certifying staff or have acquired at least 2 years of experience in continuing airworthiness in
addition to the experience referred to in point (1);
(3) they have received appropriate aeronautical-maintenance training.
(b) Before the organisation issues an airworthiness review staff authorisation to a person, that person shall perform an
airworthiness review under the supervision of the competent authority or under the supervision of a person that is
already authorised as airworthiness review staff by the organisation. If this airworthiness review performed under
supervision is satisfactory, that person shall be authorised as airworthiness review staff by the compliance monitoring
manager.
CAO.UAS.048 Staff issuing permits to fly
A permit to fly shall be issued by airworthiness review staff specifically authorised by the organisation for that purpose.
CAO.UAS.050 Components, equipment and tools
(a) The organisation shall have, or shall have access to, equipment and tools that are adequate to discharge its
responsibilities.
(b) The organisation shall ensure that the equipment and tools it uses are controlled and calibrated to an officially
recognised standard. It shall keep records of such calibrations and the standards used.
(c) As regards maintenance, the organisation shall inspect, classify and appropriately segregate all incoming components
received in accordance with points ML.UAS.501 and ML.UAS.504 of Annex I (Part-ML.UAS), as applicable.
CAO.UAS.055 Maintenance data and work orders
(a) The organisation shall have access to and use applicable current maintenance data specified in point ML.UAS.401(b) of
Annex I (Part-ML.UAS) which is necessary for the performance of maintenance.
(b) Before maintenance commences, a written work order shall be agreed between the organisation and the person or
organisation requesting the maintenance, in a manner that establishes the maintenance to be performed.
CAO.UAS.060 Maintenance standards
(a) All maintenance shall be performed in accordance with the requirements of Subparts D, E and H of Annex I
(Part-ML.UAS).
(b) When performing maintenance, the organisation shall comply with the following requirements:
(1) ensure that the area where maintenance is performed is well-organised and clean (free of dirt and contaminants);
(2) use the methods, techniques, standards and instructions specified in the maintenance data and work orders
referred to in point CAO.UAS.055;
(3) use the tools, equipment and materials specified in point CAO.UAS.050;
(4) ensure that maintenance is performed in accordance with any environmental limitations specified in the
maintenance data referred to in point CAO.UAS.055;
(5) ensure that proper facilities are used in case of inclement weather or lengthy maintenance;
(6) ensure that the risk of errors during maintenance is minimised, in particular the risk of errors repeated in identical
maintenance tasks;
(7) ensure that an error-capturing method is implemented after the performance of any critical maintenance task;
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 31/37EN
OJ L, 23.5.2024
(8) perform a general verification after the completion of maintenance in order to ensure that the UA, the CMU or the
component is clear of all tools, equipment and any extraneous parts and materials, and that all access panels
removed have been refitted.
CAO.UAS.065 Certification of UA maintenance
Upon completion of the maintenance performed on an UA in accordance with this Regulation, the organisation shall
certify such maintenance in accordance with point ML.UAS.801 of Annex I (Part-ML.UAS).
CAO.UAS.070 Certification of component maintenance
(a) Upon completion of the maintenance carried out on UA components in accordance with this Regulation, the
organisation shall certify such maintenance in accordance with point ML.UAS.802 of Annex I (Part-ML.UAS).
(b) Upon completion of the maintenance performed, in accordance with this Regulation, on CMU components referred to
in point ML.UAS.520(d) of Annex I (Part-ML.UAS), the organisation shall certify such maintenance in accordance with
point ML.UAS.804 of Annex I (Part-ML.UAS).
(c) Points (a) and (b) do not apply to components fabricated in accordance with point CAO.UAS.095(a)(5).
CAO.UAS.071 Certification of CMU maintenance
Upon completion of the maintenance performed on the CMU in accordance with this Regulation, the organisation shall
certify such maintenance in accordance with point ML.UAS.803 of Annex I (Part-ML.UAS).
CAO.UAS.072 Certification of CMU installation
Upon completion of the installation of the CMU in accordance with this Regulation, if so prescribed by the design approval
holder, the organisation shall certify such installation in accordance with point ML.UAS.805 of Annex I (Part-ML.UAS).
CAO.UAS.075 Continuing airworthiness management
(a) All continuing airworthiness management tasks shall be performed in accordance with the requirements of Subpart C
of Annex I (Part-ML.UAS).
(b) For every UAS managed, the organisation shall:
(1) develop and control the UAS maintenance programme, and approve the initial issue and its amendments;
deviations pursuant to ML.UAS.302(d) shall be performed in accordance with a procedure approved by the
competent authority, and their justifications recorded by the organisation;
(2) make that UAS maintenance programme available to the owner of the UA;
(3) ensure that modifications and repairs comply with point ML.UAS.304 of Annex I (Part-ML.UAS);
(4) ensure that all maintenance is certified in accordance with Subpart H of Annex I (Part-ML.UAS);
(5) ensure that all applicable ADs and all operational requirements with a continuing airworthiness impact are
applied;
(6) ensure that all defects are rectified by an appropriately approved maintenance organisation;
(7) ensure that the UAS is made available for maintenance to an appropriately approved maintenance organisation,
in accordance with the UAS maintenance programme and whenever necessary;
(8) coordinate the scheduled maintenance and the application of ADs in order to ensure the work is performed
properly;
(9) manage and archive all continuing airworthiness records;
32/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
(10) ensure that the mass-and-balance statement reflects the current configuration of the UA, when such
information is provided by the UA manufacturer.
CAO.UAS.080 Continuing airworthiness management data
(a) The organisation shall have access to and use applicable current continuing airworthiness management data which is
necessary for the performance of continuing airworthiness management tasks.
(b) That data is specified in point ML.UAS.401(b) of Annex I (Part-ML.UAS).
CAO.UAS.085 Airworthiness review
The organisation shall perform any airworthiness review in accordance with point ML.UAS.903 of Annex I (Part-ML.UAS).
CAO.UAS.086 Permit to fly
The organisation shall issue any permit to fly in accordance with point 21.A.711(d) of Annex I (Part 21) to Regulation (EU)
No 748/2012 when it can attest conformity with the approved flight conditions in accordance with a procedure specified
in the organisation manual.
CAO.UAS.090 Record-keeping
(a) The organisation shall retain the following records as applicable to the privileges it holds:
(1) Maintenance records
Certificates of release to service (‘CRS’) together with all supporting documents necessary to demonstrate that all
maintenance requirements have been met; the organisation shall also provide the CRS to the person or
organisation requesting the maintenance, together with any record, such as specific repair or modification data,
necessary to ensure compliance with point ML.UAS.305 of Annex I (Part-ML.UAS).
(2) CMU installation records
CRS together with all supporting documents necessary to demonstrate that all installation requirements have been
met; the organisation shall also provide the CRS to the person or organisation requesting the installation, together
with any specific installation data.
(3) Continuing airworthiness management records
The records required by point ML.UAS.305 of Annex I (Part-ML.UAS).
(4) Airworthiness review records
ARCs issued or extended, together with all supporting documents. These records shall also be provided to the
organisation managing the UAS continuing airworthiness, if different from the organisation issuing the ARC.
(5) Permit-to-fly records
The permit to fly issued and any document supporting the issuance of that permit to fly, including the flight
conditions.
(b) The organisation shall retain personnel records and authorisations that are necessary to demonstrate the qualification
of its personnel. It shall retain the records that are relevant to certifying staff, airworthiness review staff and staff
issuing permits to fly for a period of at least 2 years after that staff has left the organisation, or after the authorisation
issued to that staff has been withdrawn.
(c) The organisation shall, upon staff request, grant them access to their personnel records as specified in point (b), and
duplicate and provide these records to them when they leave the organisation.
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 33/37EN
OJ L, 23.5.2024
(d) The organisation shall retain the records:
(1) referred to in point (a)(1), and any associated maintenance data, for a period of 3 years from the date on which the
UA, CMU or component maintenance has been released;
(2) referred to in point (a)(2), for the organisation installing the CMU, if different from the organisation managing the
UAS continuing airworthiness, for a period of 3 years after the CMU installation has been certified;
(3) referred to in point (a)(3) for the period specified in point ML.UAS.305 of Annex I (Part-ML.UAS);
(4) referred to in point (a)(4):
— for the organisation managing the UAS continuing airworthiness, for a period of 2 years after the UA has
been permanently withdrawn from service,
— for the organisation issuing the ARC, if different from the organisation managing the UAS continuing
airworthiness, for a period of 4 years after the ARC has been issued;
(5) referred to in point (a)(5):
— for the organisation managing the UAS continuing airworthiness, for a period of 2 years after the UA has
been permanently withdrawn from service,
— for the organisation issuing the permit to fly, if different from the organisation managing the UAS continuing
airworthiness, for a period of 3 years after the permit to fly has been issued.
(e) Compliance monitoring records shall be kept for a minimum period of 2 years.
(f) All records shall be stored in a manner that ensures protection from damage, alteration, and theft.
(g) Where the continuing airworthiness management of an UAS is transferred to another organisation or person, all the
records retained under points (a)(2) to (a)(5) shall be transferred to that organisation or person. If the transfer is made
to another Part-CAO.UAS organisation, point (d) shall apply to that organisation from the moment of the transfer.
(h) When the organisation terminates its operations, all retained records shall be transferred as follows:
(1) the records referred to in point (a)(1) shall be transferred to the last owner or customer of the respective UAS or
component, or shall be stored as specified by the competent authority;
(2) the records referred to in points (a)(2) to (a)(5) shall be transferred to the owner of the UA.
CAO.UAS.095 Privileges of the organisation
In accordance with the organisation manual, the organisation shall be granted with one or more of the following privileges:
(a) Maintenance
(1) Maintain UA, CMU or components specified in the scope of work and at the locations specified in the organisation
manual.
(2) Arrange for the performance of specialised services by an appropriately qualified subcontracted organisation
under the control of the Part-CAO.UAS organisation, in accordance with the appropriate procedures specified in
the organisation manual.
(3) Under the conditions specified in the procedure referred to in point CAO.UAS.025(b)(6), maintain UA, CMU or
components specified in the scope of work at a location not listed in the organisation manual.
(4) Certify maintenance in accordance with points CAO.UAS.065, CAO.UAS.070 or CAO.UAS.071.
(5) The organisation may fabricate, in conformity with maintenance data, a restricted range of parts for use in the
course of ongoing maintenance work at its own facilities, as indicated in the organisation manual.
34/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
(b) CMU installation
An organisation approved for CMU maintenance may perform the installation of a CMU and certify such installation in
accordance with point CAO.UAS.072.
(c) Continuing airworthiness management
(1) Manage the continuing airworthiness of any UAS specified in the scope of work.
(2) Approve the UAS maintenance programme in accordance with point ML.UAS.302(b) of Annex I (Part-ML.UAS).
(3) Arrange for the performance of limited continuing airworthiness tasks by a subcontracted organisation subject to
the compliance monitoring function of the Part-CAO.UAS organisation, as listed in the organisation certificate.
(4) Extend the validity of an ARC in accordance with point ML.UAS.901(c) of Annex I (Part-ML.UAS).
(d) Airworthiness review
An organisation whose approval includes the privileges referred to in point (a) or (c), may be approved to perform
airworthiness reviews in accordance with point CAO.UAS.085 and issue the related ARC.
(e) Permit to fly
An organisation whose approval includes the privilege referred to in point (d), may be approved to issue a permit to fly
in accordance with point CAO.UAS.086 for those UA for which it can issue the ARC.
CAO.UAS.100 Compliance monitoring and organisational review
(a) To ensure that the organisation continuously meets the requirements of this Regulation, the organisation shall establish
a compliance monitoring function.
(b) That function shall independently monitor:
(1) the compliance of the organisation manual with this Regulation;
(2) the compliance of the organisation’s activities with the organisation manual.
(c) The function shall also monitor the compliance of contracted maintenance with the contract or work orders.
(d) If the organisation holds one or more additional organisation certificates within the scope of Regulation
(EU) 2018/1139, the compliance monitoring function may be integrated into that required under the additional
certificate(s) held.
(e) The organisation may replace the compliance monitoring function by regular organisational reviews not requiring
independence, provided that all the following conditions are met and subject to the approval by the competent
authority:
(1) the organisation’s staff does not exceed 10 full-time equivalents involved in maintenance;
(2) the organisation’s staff does not exceed 5 full-time equivalents involved in continuing airworthiness management.
In that case, the organisation shall not subcontract continuing airworthiness management tasks to other parties.
CAO.UAS.102 Protection of information and communication systems and data
(a) The organisation shall protect information and communication technology systems and data used for continuing
airworthiness activities, including relevant software and hardware, and network connections.
(b) Without prejudice to point CAO.UAS.120, the organisation shall ensure that any information security incident or
vulnerability, which may represent a significant risk to aviation safety, is reported to its competent authority.
In addition:
(1) when such an incident or vulnerability affects an aircraft or associated system or component, the organisation
shall also report it to the design approval holder;
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 35/37EN
OJ L, 23.5.2024
(2) when such an incident or vulnerability affects a system or constituent used by the organisation, the organisation
shall report it to the organisation responsible for the design of the system or constituent.
(c) The reporting referred to in point (b) shall be made as soon as possible, but not exceeding 72 hours from the time the
condition has been known to the organisation, unless exceptional circumstances prevent this.
CAO.UAS.105 Changes to the organisation
(a) The following changes to the organisation shall require prior approval by the competent authority:
(1) changes to the certificate, including the terms of approval of the organisation;
(2) changes of the persons referred to in points (a) to (c) of point CAO.UAS.035;
(3) changes to the procedure specified in point (b).
(b) Any other changes shall be managed by the organisation and notified to the competent authority in accordance with a
procedure specified in the organisation manual. The organisation shall submit the description of the changes and the
corresponding amendment of the organisation manual to the competent authority within 15 days from the day on
which the changes took place.
CAO.UAS.110 Continued validity of an approval certificate
An approval certificate shall be issued for an unlimited duration, and shall remain valid subject to compliance with all the
following conditions:
(a) the organisation remains in compliance with the requirements of this Annex, taking into account the requirements of
point CAO.UAS.115 related to the handling of findings;
(b) the organisation has ensured that access is granted to the competent authority as specified in point CAO.UAS.112;
(c) the approval certificate has not been surrendered by the organisation, or suspended or revoked by the competent
authority.
CAO.UAS.112 Access
For the purpose of verifying compliance with the relevant requirements of this Annex, the organisation shall ensure that
access to any facility, UAS, document, record, data, procedure or to any other material relevant to its activities subject to
certification is granted to any person authorised by the competent authority.
CAO.UAS.115 Findings and observations
(a) After receiving a notification of a finding from the competent authority in accordance with point AR.UAS.GEN.350 of
Annex I (Part-AR.UAS) to Implementing Regulation (EU) 2024/1109, the organisation shall, within the period agreed
with the competent authority, define a corrective action plan (to eliminate the finding(s) and prevent its (their)
reoccurrence) and demonstrate the implementation of that plan to the competent authority.
(b) The observations received in accordance with point AR.UAS.GEN.350(f) of Annex I (Part-AR.UAS) to Implementing
Regulation (EU) 2024/1109 shall be given due consideration by the organisation. The organisation shall record the
decisions it has taken in respect of those observations.
CAO.UAS.120 Occurrence reporting
(a) The organisation shall establish and maintain an occurrence-reporting system, including mandatory and voluntary
reporting. Organisations that have their principal place of business in a Member State shall ensure that their
occurrence-reporting system complies with the requirements of Regulation (EU) No 376/2014 of the European
Parliament and of the Council(1)and Regulation (EU) 2018/1139, as well as with the delegated and implementing acts
adopted on the basis of those Regulations.
(1) Regulation (EU) No 376/2014 of the European Parliament and of the Council of 3 April 2014 on the reporting, analysis and follow-up
of occurrences in civil aviation, amending Regulation (EU) No 996/2010 of the European Parliament and of the Council and repealing
Directive 2003/42/EC of the European Parliament and of the Council and Commission Regulations (EC) No 1321/2007 and (EC)
No 1330/2007 (OJ L 122, 24.4.2014, p. 18, ELI: http://data.europa.eu/eli/reg/2014/376/oj).
36/37 ELI: http://data.europa.eu/eli/reg_del/2024/1107/ojEN
OJ L, 23.5.2024
(b) Without prejudice to Article 19 of Implementing Regulation (EU) 2019/947, the organisation shall report to its
competent authority and to the design approval holder of the UAS or component any safety-related event or
condition of an UAS or component identified by the organisation which endangers or, if not corrected or addressed,
could endanger an UAS or any other person, and in particular any accident or serious incident.
(c) When the organisation is contracted for maintenance, the organisation shall also report any such event or condition
that affects an UAS to the organisation responsible for the continuing airworthiness management of that UAS in
accordance with point ML.UAS.201 of Annex I (Part-ML.UAS). For events or conditions that affect components, the
organisation shall report to the person or organisation that requested the maintenance.
(d) When the organisation is contracted to perform continuing airworthiness management tasks, it shall also report any
such event or condition that affects an UAS to the owner that has contracted the Part-CAO.UAS organisation.
ELI: http://data.europa.eu/eli/reg_del/2024/1107/oj 37/37