Commission Implementing Decision (EU) 2023/2584 of 15 November 2023 on harmonised standards for the interoperability of the rail systems drafted in support of Directive (EU) 2016/797 of the European Parliament and of the Council

Official Journal EN of the European Union L series 2023/2584 21.11.2023 COMMISSION IMPLEMENTING DECISION (EU) 2023/2584 of 15 November 2023 on harmonised standards for the interoperability of the rail systems drafted in support of Directive

(EU) 2016/797 of the European Parliament and of the Council THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012on European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council(1), and in particular Article 10(6) thereof,

Whereas:

(1) In accordance with Article 17 of Directive (EU) 2016/797 of the European Parliament and of the Council(2), interoperability constituents and subsystems which are in conformity with harmonised standards or parts thereof, the references of which have been published in the Official Journal of the European Union, are to be presumed to be in conformity with the essential requirements covered by those standards or parts thereof set out in that Directive.

(2) By Commission Implementing Decision C(2023) 1057(3) the Commission made a request to the European Committee for Standardisation (CEN) and the European Committee for Electrotechnical Standardisation (Cenelec) for the drafting and the revision of harmonised standards in support of Directive (EU) 2016/797, which repealed Directive 2008/57/EU.

(3) On the basis of the request set out in Implementing Decision C(2023) 1057 CEN and Cenelec drafted the following

new harmonised standards: EN 15085-3:2022+A1:2023; EN 15085-6:2022; EN 16334-1:2014+A1:2022; EN 16704-1:2016+A1:2021; EN 16704-3:2016+A1:2021; EN 16839:2022; EN 50641:2020 and an amendment EN 62580-1:2016/A11:2017 to harmonised standard EN 62580-1:2016.

(4) Furthermore, on the basis of the Request, CEN and Cenelec revised the following harmonised standards, the references of which are published in the C series of the Official Journal of the European Union by means of Communications 2011/C 214/02(4) and 2018/C 282/03(5), and Commission Implementing Decision

(EU) 2020/453(6), in order to adapt them to technological progress: EN ISO 3381:2011, EN 12080:2017, EN 12082:2017, EN 13103-1:2017, EN 13230-4:2009, EN 13260:2009+A1:2010, EN 13261:2009+A1:2010, EN 13262:2004+A2:2011, EN 13272:2012, EN 13481-2:2012+A1:2017, EN 13481-3:2012, EN 13481-5:2012 +A1:2017, EN 13481-7:2012, EN 13674-2:2006+A1:2010, EN 13715:2006+A1:2010, EN 13749:2011, EN 13979-1:2003+A2:2011, EN 14033-1:2017, EN 14067-5:2006+A1:2010, EN 14363:2016+A1:2018, EN 14531-1:2015, EN 14535-1:2005+A1:2011, EN 14535-2:2011, EN 14535-3:2015, EN 14601:2005+A1:2010,

(1) OJ L 316, 14.11.2012, p. 12.

(2) Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (OJ L 138, 26.5.2016, p. 44).

(3) Commission Implementing Decision C(2023) 1057 final of 20.2.2023 on a standardisation request to the European Committee for Standardisation and the European Committee for Electrotechnical Standardisation as regards products in support of Directive

(EU) 2016/797 of the European Parliament and of the Council

(4) Commission communication in the framework of the implementation of the Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (OJ C 214, 20.7.2011, p. 54).

(5) Commission communication in the framework of the implementation of the Directive 2008/57/EC of the European Parliament and of the Council on the interoperability of the rail system within the Community (OJ C 282, 10.8.2018, p. 6).

(6) Commission Implementing Decision (EU) 2020/453 of 27 March 2020 on the harmonised standards for railway products drafted in support of Directive 2008/57/EC of the European Parliament and of the Council on the interoperability of the rail system within the Community (OJ L 95, 30.3.2020, p. 1).

ELI: http://data.europa.eu/eli/dec_impl/2023/2584/oj 1/21EN OJ L, 21.11.2023 EN 14752:2015, EN 15020:2006+A1:2010, EN 15153-1:2013+A1:2016, EN 15153-2:2013, EN 15227:2008 +A1:2010, EN 15302:2008+A1:2010, EN 15427:2008+A1:2010, EN 15437-1:2009, EN 15437-2:2012, EN 15528:2015, EN 15551:2017, EN 15566:2016, EN 15595:2009+A1:2011, EN 15611:2008+A1:2010, EN 15612:2008+A1:2010, EN 15624:2008+A1:2010, EN 15625:2008+A1:2010, EN 15654-1:2018, EN 15663:2009, EN 15663:2009/AC:2010, EN 15686:2010, EN 15687:2010, EN 15734-1:2010EN 15734-2:2010 as corrected by EN 15734-2:2010/AC:2012, EN 15746-1:2010+A1:2011, EN 15746-2:2010 +A1:2011, EN 15806:2010, EN 15807:2011, EN 15892:2011, EN 16116-1:2013, EN 16116-2:2013, EN 16185-1:2014, EN 16185-2:2014, EN 16186-3:2016+A1:2018, EN 16207:2014, EN 16334:2014, EN 45545-2:2013+A1:2015, EN 50122-2:2010, EN 50122-3:2010, EN 50155:2007 as corrected by EN 50155:2007/AC:2010 and EN 50155:2007/AC:2012, EN 50159:2010, EN 50163:2004 as corrected by EN 50163:2004/AC:2010 and EN 50163:2004/AC:2013 and as amended by EN 50163:2004/A1:2007, EN 50238-1:2003 as corrected by EN 50238-1:2003/AC:2014EN 50317:2012, EN 50317:2012/AC:2012EN 50367:2012, EN 50367:2012/AC:2013 and amended by EN 50367:2012/A1:2016, EN 50388:2012 as corrected by EN 50388:2012/AC:2013, EN 50553:2012 as corrected by EN 50553:2012/AC:2013 and amended by EN 50553:2012/A1:2016.

(5) This resulted in the adoption of the following amending harmonised standards: EN 13481-2:2022; EN 13481-3:2022; EN 14363:2016+A2:2022; EN 15437-2:2012+A1:2022; EN 15551:2022; EN 15566:2022;

EN 15611:2020+A1:2022; EN 15624:2021; EN 15625:2021; EN 15734-1:2010+A1:2021; EN 15807:2021; EN 16116-1:2022; EN 16116-2:2021; EN 16186-3:2022; EN 50155:2021.

(6) In addition, on the basis of the Request, CEN and Cenelec amended/revised the following standards, the references of which are included in Annex I to Implementing Decision (EU) 2020/453: EN 14067-6:2018, EN 14198:2016 +A1:2018, EN 50122-1:2011 as amended by EN 50122-1:2011/A1:2011, EN 50122-1:2011/A2:2016, EN 50122-1:2011/A3:2016 and EN 50122-1:2011/A4:2017 and as corrected by EN 50122-1:2011/AC:2012, EN 50318:2018.

(7) This resulted in the adoption of the following amending harmonised standards: EN 14198:2016+A2:2021 and EN 50318:2018 as amended by EN 50318:2018/A1:2022.

(8) The Commission, together with CEN and Cenelec, has assessed whether those standards drafted or revised by CEN and Cenelec comply with the request set out in Implementing Decision C(2023) 1057.

(9) The harmonised standards drafted, revised and amended by CEN and Cenelec on the basis of the Request, except for harmonised standard EN 50641:2020, satisfy all the requirements, which they aim to cover and which are set out in Directive (EU) 2016/797. It is therefore appropriate to publish the references of those standards in the Official Journal of the European Union.

(10) However, having examined the standard EN 50641:2020, the Commission has concluded that the standard meets the requirements set out in Directive (EU) 2016/797 only in relation to clause 4.2.4 of Commission Regulation (EU) No 1301/2014(7). It is therefore appropriate to publish the reference of this standard, with restrictions, in the Official Journal of the European Union.

(11) In the interests of clarity and rationality, a complete list of references of harmonised standards drafted in support of Directive (EU) 2016/797 and satisfying the requirements they aim to cover should be published in a single act. The other references of harmonised standards originally published in Implementing Decision (EU) 2020/453 and Communication 2018/C 282/03 should therefore either be included in this Decision if their validity is confirmed, or be withdrawn at the date of publication of this Decision from the Official Journal of the European Union.

(12) Many of the references of harmonised standards published in Communication 2018/C 282/03 have already been withdrawn by Implementing Decision (EU) 2020/453.

(7) Commission Regulation (EU) No 1301/2014 of 18 November 2014 on the technical specifications for interoperability relating to the ‘energy’ subsystem of the rail system in the Union (OJ L 356, 12.12.2014, p. 179).

2/21 ELI: http://data.europa.eu/eli/dec_impl/2023/2584/ojEN OJ L, 21.11.2023

(13) Implementing Decision (EU) 2020/453 should therefore be repealed and Communication 2018/C 282/03 should cease to apply.

(14) Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the date of its publication,

HAS ADOPTED THIS DECISION:

Article 1 The references of harmonised standards for the interoperability of the rail systems and drafted in support of Directive

(EU) 2016/797,listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union. The reference listed in row 114 of that Annex is published with restrictions.

Article 2 Communication 2018/C 282/03 shall cease to apply.

The references of harmonised standards published in that Communication, listed in Annex II to this Decision, are hereby withdrawn from the Official Journal of the European Union.

Article 3 Implementing Decision (EU) 2020/453 is repealed.

The references of harmonised standards published in that Decision, and listed in Annex III to this Decision, are hereby withdrawn from the Official Journal of the European Union.

Article 4 This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.

Done at Brussels, 15 November 2023.

For the Commission The President Ursula VON DER LEYEN

ELI: http://data.europa.eu/eli/dec_impl/2023/2584/oj 3/21EN OJ L, 21.11.2023 ANNEX I No Reference of the standard

1. EN 12081:2017 Railway applications – Axleboxes – Lubricating greases

2. EN 12663-1:2010+A1:2014 Railway applications – Structural requirements of railway vehicle bodies – Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons)

3. EN 12663-2:2010 Railway applications – Structural requirements of railway vehicle bodies – Part 2: Freight wag

4. EN 13129:2016 Railway applications – Air conditioning for main line rolling stock – Comfort parameters and type tests

5. EN 13145:2001+A1:2011 Railway applications – Track – Wood sleepers and bearers

6. EN 13230-1:2016 Railway applications – Track – Concrete sleepers and bearers – Part 1: General requirements

7. EN 13230-2:2016 Railway applications – Track – Concrete sleepers and bearers – Part 2: Prestressed monoblock sleepers

8. EN 13230-3:2016 Railway applications – Track – Concrete sleepers and bearers – Part 3: Twin-block reinforced sleepers

9. EN 13231-5:2018 Railway applications – Track – Acceptance of works – Part 5: Procedures for rail reprofiling in plain line, switches, crossings and expansion devices

10. EN 13232-2:2003+A1:2011 Railway applications – Track – Switches and crossings – Part 2: Requirements for geometric design

11. EN 13232-3:2003+A1:2011 Railway applications – Track – Switches and crossings – Part 3: Requirements for wheel/rail interaction

12. EN 13232-4:2005+A1:2011 Railway applications – Track – Switches and crossings – Part 4: Actuation, locking and detection

13. EN 13232-5:2005+A1:2011 Railway applications – Track – Switches and crossings – Part 5: Switches 4/21 ELI: http://data.europa.eu/eli/dec_impl/2023/2584/ojEN OJ L, 21.11.2023 No Reference of the standard

14. EN 13232-6:2005+A1:2011 Railway applications – Track – Switches and crossings – Part 6: Fixed common and obtuse crossings

15. EN 13232-7:2006+A1:2011 Railway applications – Track – Switches and crossings – Part 7: Crossings with moveable parts

16. EN 13232-8:2007+A1:2011 Railway applications – Track – Switches and crossings – Part 8: Expansion devices

17. EN 13232-9:2006+A1:2011 Railway applications – Track – Switches and crossings – Part 9: Layouts

18. EN 13481-2:2022 Railway applications – Track – Performance requirements for fastening systems – Part 2: Fastening systems for concrete sleepers in ballast

19. EN 13481-3:2022 Railway applications – Track – Performance requirements for fastening systems – Part 3: Fastening systems for wood and polymeric composite sleepers

20. EN 13674-1:2011+A1:2017 Railway applications – Track – Rail – Part 1: Vignole railway rails 46 kg/m and above

21. EN 13674-3:2006+A1:2010 Railway applications – Track – Rail – Part 3: Check rails

22. EN 13803-1:2010 Railway applications – Track – Track alignment design parameters – Track gauges 1 435mm and wider – Part 1: Plain line

23. EN 13803-2:2006+A1:2009 Railway applications – Track – Track alignment design parameters – Track gauges 1 435mm and wider – Part 2: Switches and crossings and comparable alignment design situations with abrupt changes of curvature

24. EN 13848-5:2017 Railway applications – Track – Track geometry quality – Part 5: Geometric quality levels – Plain line, switches and crossings

25. EN 14067-4:2013+A1:2018 Railway applications – Aerodynamics – Part 4: Requirements and test procedures for aerodynamics on open track

26. EN 14198:2016+A2:2021 Railway applications – Braking – Requirements for the brake system of trains hauled by locomotives

ELI: http://data.europa.eu/eli/dec_impl/2023/2584/oj 5/21EN OJ L, 21.11.2023 No Reference of the standard

27. EN 14363:2016+A2:2022 Railway applications – Testing and Simulation for the acceptance of running characteristics of railway vehicles – Running Behaviour and stationary tests

28. EN 14531-2:2015 Railway applications – Methods for calculation of stopping and slowing distances and immobilization braking – Part 2: Step by step calculations for train sets or single vehicles

29. EN 14587-2:2009 Railway applications – Track – Flash butt welding of rails – Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant

30. EN 14813-1:2006+A1:2010 Railway applications – Air conditioning for driving cabs – Part 1: Comfort parameters

31. EN 14813-2:2006+A1:2010 Railway applications – Air conditioning for driving cabs – Part 2: Type tests

32. EN 14865-1:2009+A1:2010 Railway applications – Axlebox lubricating greases – Part 1: Method to test the ability to lubricate

33. EN 14865-2:2006+A2:2010 Railway applications – Axlebox lubricating greases – Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h

34. EN 15085-3:2022+A1:2023 Railway applications – Welding of railway vehicles and components – Part 3: Design requirements

35. EN 15085-6:2022 Railway applications – Welding of railway vehicles and components – Part 6: Maintenance welding requirements

36. EN 15220:2016 Railway applications – Brake indicators

37. EN 15273-2:2013+A1:2016 Railway applications – Gauges – Part 2: Rolling stock gauge

38. EN 15273-3:2013+A1:2016 Railway applications – Gauges – Part 3: Structure gauges

39. EN 15313:2016 Railway applications – In-service wheelset operation requirements – In-service and off-vehicle wheelset maintenance 6/21 ELI: http://data.europa.eu/eli/dec_impl/2023/2584/ojEN OJ L, 21.11.2023 No Reference of the standard

40. EN 15355:2019 Railway applications – Braking – Distributor valves and distributor-isolating devices

41. EN 15437-2:2012+A1:2022 Railway applications – Axlebox condition monitoring – Interface and design requirements – Part 2:

Performance and design requirements of on-board systems for temperature monitoring

42. EN 15461:2008+A1:2010 Railway applications – Noise emission – Characterisation of the dynamic properties of track sections for pass by noise measurements

43. EN 15551:2022 Railway applications – Railway rolling stock – Buffers

44. EN 15566:2022 Railway applications – Railway Rolling stock – Draw gear and screw coupling

45. EN 15594:2009 Railway applications – Track – Restoration of rails by electric arc welding

46. EN 15610:2019 Railway applications – Acoustics – Rail and wheel roughness measurement related to noise generation

47. EN 15611:2020+A1:2022 Railway applications – Braking – Relay valves

48. EN 15624:2021 Railway applications – Braking – Empty-loaded changeover devices

49. EN 15625:2021 Railway applications – Braking – Automatic variable load sensing devices

50. EN 15723:2010 Railway applications – Closing and locking devices for payload protecting devices against environmental influences – Requirements for durability, operation, indication, maintenance, recycling

51. EN 15734-1:2010+A1:2021 Railway applications – Braking systems of high speed trains – Part 1: Requirements and definitions

52. EN 15807:2021 Railway applications – Pneumatic half couplings

53. EN 15827:2011 Railway applications – Requirements for bogies and running gears

ELI: http://data.europa.eu/eli/dec_impl/2023/2584/oj 7/21EN OJ L, 21.11.2023 No Reference of the standard

54. EN 15877-1:2012+A1:2018 Railway applications – Marking on railway vehicles – Part 1: Freight wagons

55. EN 15877-2:2013 Railway applications – Markings of railway vehicles – Part 2: External markings on coaches, motive power units, locomotives and on track machines

56. EN 16019:2014 Railway applications – Automatic coupler – Performance requirements, specific interface geometry and test method

57. EN 16116-1:2022 Railway applications – Design requirements for steps, handrails and associated access for staff – Part 1:

Passenger vehicles, vans and locomotives

58. EN 16116-2:2021 Railway applications – Design requirements for steps, handrails and associated access for staff – Part 2: Freight wagons

59. EN 16186-1:2014+A1:2018 Railway applications – Driver’s cab – Part 1: Anthropometric data and visibility

60. EN 16186-2:2017 Railway applications – Driver’s cab – Part 2: Integration of displays, controls and indicators

61. EN 16186-3:2022 Railway applications – Driver’s cab – Part 3: Design of displays for heavy rail vehicles

62. EN 16235:2013 Railway application – Testing for the acceptance of running characteristics of railway vehicles – Freight wagons – Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN 14363

63. EN 16241:2014+A1:2016 Railway applications – Slack adjuster

64. EN 16286-1:2013 Railway applications – Gangway systems between vehicles – Part 1: Main applications

65. EN 16334-1:2014+A1:2022 Railway applications – Passenger Alarm System – Part 1: System requirements for mainline rail

66. EN 16404:2016 Railway applications – Re-railing and recovery requirements for railway vehicles 8/21 ELI: http://data.europa.eu/eli/dec_impl/2023/2584/ojEN OJ L, 21.11.2023 No Reference of the standard

67. EN 16452:2015+A1:2019 Railway applications – Braking – Brake blocks

68. EN 16494:2015 Railway applications – Requirements for ERTMS Trackside Boards

69. EN 16584-1:2017 Railway applications – Design for PRM use – General requirements – Part 1: Contrast

70. EN 16584-2:2017 Railway applications – Design for PRM use – General requirements – Part 2: Information

71. EN 16584-3:2017 Railway applications – Design for PRM use – General requirements – Part 3: Optical and friction characteristics

72. EN 16585-1:2017 Railway applications – Design for PRM use – Equipment and components onboard rolling stock – Part 1:

Toilets

73. EN 16585-2:2017 Railway applications – Design for PRM use – Equipment and components on board rolling stock – Part 2:

Elements for sitting, standing and moving

74. EN 16585-3:2017 Railway applications – Design for PRM use – Equipment and components on board rolling stock – Part 3:

Clearways and internal doors

75. EN 16586-1:2017 Railway applications – Design for PRM use – Accessibility of persons with reduced mobility to rolling stock – Part 1: Steps for access and egress

76. EN 16586-2:2017 Railway applications – Design for PRM use – Accessibility of persons with reduced mobility to rolling stock – Part 2: Boarding aids

77. EN 16587:2017 Railway applications – Design for PRM Use – Requirements on obstacle free routes for infrastructure

78. EN 16683:2015 Railway applications – Call for aid and communication device – Requirements

79. EN 16704-1:2016+A1:2021 Railway applications – Track – Safety protection on the track during work – Part 1: Railway risks and common principles for protection of fixed and mobile work sites

ELI: http://data.europa.eu/eli/dec_impl/2023/2584/oj 9/21EN OJ L, 21.11.2023 No Reference of the standard

80. EN 16704-3:2016+A1:2021 Railway applications – Track – Safety protection on the track during work – Part 3: Competences for personnel related to work on or near tracks

81. EN 16729-1:2016 Railway applications – Infrastructure – Non-destructive testing on rails in track – Part 1: Requirements for ultrasonic inspection and evaluation principles

82. EN 16729-3:2018 Railway applications – Infrastructure – Non-destructive testing on rails in track – Part 3: Requirements for identifying internal and surface rail defects

83. EN 16729-4:2018 Railway applications – Infrastructure – Non-destructive testing on rails in track – Part 4: Qualification of personnel for non-destructive testing on rails

84. EN 16839:2022 Railway applications – Rolling stock – Head stock layout

85. EN 16922:2017+A1:2019 Railway applications – Ground based services – Vehicle waste water discharge equipment

86. EN 17023:2018 Railway applications – Railway vehicle maintenance – Creation and modification of maintenance plan

87. EN 17069-1:2019 Railway applications – Systems and procedures for change of track gauge – Part 1: Automatic Variable Gauge Systems

88. EN 45545-1:2013 Railway applications – Fire protection on railway vehicles – Part 1: General

89. EN 45545-3:2013 Railway applications – Fire protection on railway vehicles – Part 3: Fire resistance requirements for fire barriers

90. EN 45545-4:2013 Railway applications – Fire protection on railway vehicles – Part 4: Fire safety requirements for rolling stock design

91. EN 45545-5:2013+A1:2015 Railway applications – Fire protection on railway vehicles – Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles 10/21 ELI: http://data.europa.eu/eli/dec_impl/2023/2584/ojEN OJ L, 21.11.2023 No Reference of the standard

92. EN 45545-6:2013 Railway applications – Fire protection on railway vehicles – Part 6: Fire control and management systems

93. EN 45545-7:2013 Railway applications – Fire protection on railway vehicles – Part 7: Fire safety requirements for flammable liquid and flammable gas installations

94. EN 50124-1:2017 Railway applications – Insulation coordination – Part 1: Basic requirements – Clearances and creepage distances for all electrical and electronic equipment

95. EN 50124-2:2017 Railway applications – Insulation coordination – Part 2: Overvoltages and related protection

96. EN 50125-2:2002 Railway applications – Environmental conditions for equipment – Part 2: Fixed electrical installations EN 50125-2:2002/AC:2010

97. EN 50125-3:2003 Railway applications – Environmental conditions for equipment – Part 3: Equipment for signalling and telecommunications EN 50125-3:2003/AC:2010

98. EN 50126-1:2017 Railway Applications – The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) – Part 1: Generic RAMS Process

99. EN 50126-2:2017 Railway Applications – The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) – Part 2: Systems Approach to Safety

100. EN 50129:2018 Railway applications – Communication, signalling and processing systems – Safety related electronic systems for signalling EN 50129:2018/AC:2019-04

101. EN 50155:2021 Railway applications – Rolling stock – Electronic equipment

102. EN 50318:2018 Railway applications – Current collection systems – Validation of simulation of the dynamic interaction between pantograph and overhead contact line EN 50318:2018/A1:2022

ELI: http://data.europa.eu/eli/dec_impl/2023/2584/oj 11/21EN OJ L, 21.11.2023 No Reference of the standard

103. EN 50405:2015 Railway applications – Current collection systems – Pantographs, testing methods for contact strips EN 50405:2015/A1:2016

104. EN 50463-1:2017 Railway applications – Energy measurement on board trains – Part 1: General

105. EN 50463-2:2017 Railway applications – Energy measurement on board trains – Part 2: Energy measuring EN 50463-2:2017/AC:2018-10

106. EN 50463-3:2017 Railway applications – Energy measurement on board trains – Part 3: Data handling

107. EN 50463-4:2017 Railway applications – Energy measurement on board trains – Part 4: Communication

108. EN 50463-5:2017 Railway applications – Energy measurement on board trains – Part 5: Conformity assessment

109. EN 50533:2011 Railway applications – Three-phase train line voltage characteristics EN 50533:2011/A1:2016

110. EN 50562:2018 Railway applications – Fixed installations – Process, protective measures and demonstration of safety for electric traction systems

111. EN 50592:2016 Railway applications – Testing of rolling stock for electromagnetic compatibility with axle counters

112. EN 50617-1:2015 Railway applications – Technical parameters of train detection systems for the interoperability of the trans- European railway system – Part 1: Track circuits

113. EN 50617-2:2015 Railway Applications – Technical parameters of train detection systems for the interoperability of the trans- European railway system – Part 2: Axle counters EN 50617-2:2015/AC:2016

114. EN 50641:2020 Railway applications – Fixed installations – Requirements for the validation of simulation tools used for the design of electric traction power supply systems

Restriction: The standard gives presumption of conformity only to clause 4.2.4. of Commission Regulation

(EU) No 1301/2014 12/21 ELI: http://data.europa.eu/eli/dec_impl/2023/2584/ojEN OJ L, 21.11.2023 No Reference of the standard

115. EN 61375-1:2012 Electronic railway equipment – Train communication network (TCN) – Part 1: General architecture (IEC 61375-1:2012)

116. EN 61375-2-1:2012 Electronic railway equipment – Train communication network (TCN) – Part 2-1: Wire Train Bus (WTB) (IEC 61375-2-1:2012)

117. EN 61375-2-2:2012 Electronic railway equipment – Train communication network (TCN) – Part 2-2: Wire Train Bus conformance testing (IEC 61375-2-2:2012)

118. EN 61375-2-5:2015 Electronic railway equipment – Train communication network (TCN) – Part 2-5: Ethernet train backbone (IEC 61375-2-5:2014)

119. EN 61375-3-1:2012 Electronic railway equipment – Train communication network (TCN) – Part 3-1: Multifunction Vehicle Bus

(MVB) (IEC 61375-3-1:2012)

120. EN 61375-3-2:2012 Electronic railway equipment – Train communication network (TCN) – Part 3-2: MVB (Multifunction Vehicle Bus) conformance testing (IEC 61375-3-2:2012)

121. EN 61375-3-3:2012 Electronic railway equipment – Train communication network (TCN) – Part 3-3: CANopen Consist Network

(CCN) (IEC 61375-3-3:2012)

122. EN 62580-1:2016 Electronic railway equipment – On-board multimedia and telematic subsystems for railways – Part 1: General architecture (IEC 62580-1:2015) EN 62580-1:2016/A11:2017

123. EN 62621:2016 Railway applications – Fixed installations – Electric traction – Specific requirements for composite insulators used for overhead contact line systems (IEC 62621:2011) EN 62621:2016/A1:2016

ELI: http://data.europa.eu/eli/dec_impl/2023/2584/oj 13/21EN OJ L, 21.11.2023 ANNEX II No Reference of the standard Date of withdrawal

1. EN ISO 3381:2011 21 November 2023 Railway applications – Acoustics – Measurement of noise inside railbound vehicles (ISO 3381:2005)

2. EN 12080:2017 21 November 2023 Railway applications – Axleboxes – Rolling bearings

3. EN 12082:2017 21 November 2023 Railway applications – Axleboxes – Performance testing

4. EN 13103-1:2017 21 November 2023 Railway applications – Wheelsets and bogies – Part 1: Design method for axles with external journals

5. EN 13230-4:2009 21 November 2023 Railway applications – Track – Concrete sleepers and bearers – Part 4: Prestressed bearers for switches and crossings

6. EN 13260:2009+A1:2010 21 November 2023 Railway applications – Wheelsets and bogies – Wheelsets – Product requirements

7. EN 13261:2009+A1:2010 21 November 2023 Railway applications – Wheelsets and bogies – Axles – Product requirements

8. EN 13262:2004+A2:2011 21 November 2023 Railway applications – Wheelsets and bogies – Wheels – Product requirements

9. EN 13272:2012 21 November 2023 Railway applications – Electrical lighting for rolling stock in public transport systems

10. EN 13481-2:2012+A1:2017 21 November 2023 Railway applications – Track – Performance requirements for fastening systems – Part 2: Fastening systems for concrete sleepers

11. EN 13481-3:2012 21 November 2023 Railway applications – Track – Performance requirements for fastening systems – Part 3: Fastening systems for wood sleepers

12. EN 13481-5:2012+A1:2017 21 November 2023 Railway applications – Track – Performance requirements for fastening systems – Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel 14/21 ELI: http://data.europa.eu/eli/dec_impl/2023/2584/ojEN OJ L, 21.11.2023 No Reference of the standard Date of withdrawal

13. EN 13481-7:2012 21 November 2023 Railway applications – Track – Performance requirements for fastening systems – Part 7: Special fastening systems for switches and crossings and check rails

14. EN 13674-2:2006+A1:2010 21 November 2023 Railway applications – Track – Rail – Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above

15. EN 13715:2006+A1:2010 21 November 2023 Railway applications – Wheelsets and bogies – Wheels – Tread profile

16. EN 13749:2011 21 November 2023 Railway applications – Wheelsets and bogies – Method of specifying the structural requirements of bogie frames

17. EN 13979-1:2003+A2:2011 21 November 2023 Railway applications – Wheelsets and bogies – Monobloc wheels – Technical approval procedure – Part 1: Forged and rolled wheels

18. EN 14033-1:2017 21 November 2023 Railway applications – Track – Railbound construction and maintenance machines – Part 1: Technical requirements for running

19. EN 14067-5:2006+A1:2010 21 November 2023 Railway applications – Aerodynamics – Part 5: Requirements and test procedures for aerodynamics in tunnels

20. EN 14363:2016+A1:2018 21 November 2023 Railway applications – Testing and Simulation for the acceptance of running characteristics of railway vehicles – Running Behaviour and stationary tests

Notice: Presumption of conformity shall only be provided when used in conjunction with the technical opinion of the European Union Agency for Railways ERA-OPI- 2018-3 (https://www.era.europa.eu/library/opinions-and-technical-advices_en)

21. EN 14531-1:2015 21 November 2023 Railway applications – Methods for calculation of stopping and slowing distances and immobilization braking – Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles

ELI: http://data.europa.eu/eli/dec_impl/2023/2584/oj 15/21EN OJ L, 21.11.2023 No Reference of the standard Date of withdrawal

22. EN 14535-1:2005+A1:2011 21 November 2023 Railway applications – Brake discs for railway rolling stock – Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements

23. EN 14535-2:2011 21 November 2023 Railway applications – Brake discs for railway rolling stock – Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements

24. EN 14535-3:2015 21 November 2023 Railway applications – Brake discs for railway rolling stock – Part 3: Brake discs, performance of the disc and the friction couple, classification

25. EN 14601:2005+A1:2010 21 November 2023 Railway applications – Straight and angled end cocks for brake pipe and main reservoir pipe

26. EN 14752:2015 21 November 2023 Railway applications – Body side entrance systems for rolling stock

27. EN 15020:2006+A1:2010 21 November 2023 Railway applications – Rescue coupler – Performance requirements, specific interface geometry and test methods

28. EN 15153-1:2013+A1:2016 21 November 2023 Railway applications – External visible and audible warning devices for trains – Part 1: Head, marker and tail lamps

29. EN 15153-2:2013 21 November 2023 Railway applications – External visible and audible warning devices for trains – Part 2: Warning horns

30. EN 15227:2008+A1:2010 21 November 2023 Railway applications – Crashworthiness requirements for railway vehicle bodies

31. EN 15302:2008+A1:2010 21 November 2023 Railway applications – Method for determining the equivalent conicity

32. EN 15427:2008+A1:2010 21 November 2023 Railway applications – Wheel/rail friction management – Flange lubrication 16/21 ELI: http://data.europa.eu/eli/dec_impl/2023/2584/ojEN OJ L, 21.11.2023 No Reference of the standard Date of withdrawal

33. EN 15437-1:2009 21 November 2023 Railway applications – Axlebox condition monitoring – Interface and design requirements – Part 1: Track side equipment and rolling stock axlebox

34. EN 15437-2:2012 21 November 2023 Railway applications – Axlebox condition monitoring – Interface and design requirements – Part 2: Performance and design requirements of on-board systems for temperature monitoring

35. EN 15528:2015 21 November 2023 Railway applications – Line categories for managing the interface between load limits of vehicles and infrastructure

36. EN 15551:2017 21 November 2023 Railway applications – Railway rolling stock – Buffers

37. EN 15566:2016 21 November 2023 Railway applications – Railway rolling stock – Draw gear and screw coupling

38. EN 15595:2009+A1:2011 21 November 2023 Railway applications – Braking – Wheel slide protection

39. EN 15611:2008+A1:2010 21 November 2023 Railway applications – Braking – Relay valves

40. EN 15612:2008+A1:2010 21 November 2023 Railway applications – Braking – Brake pipe accelerator valve

41. EN 15624:2008+A1:2010 21 November 2023 Railway applications – Braking – Empty-loaded changeover devices

42. EN 15625:2008+A1:2010 21 November 2023 Railway applications – Braking – Automatic variable load sensing devices

43. EN 15654-1:2018 21 November 2023 Railway applications – Measurement of vertical forces on wheels and wheelsets – Part 1: On-track measurement sites for vehicles in service

ELI: http://data.europa.eu/eli/dec_impl/2023/2584/oj 17/21EN OJ L, 21.11.2023 No Reference of the standard Date of withdrawal

44. EN 15663:2009 21 November 2023 Railway applications – Definition of vehicle reference masses EN 15663:2009/AC:2010

45. EN 15686:2010 21 November 2023 Railway applications – Testing for the acceptance of running characteristics of railway vehicles with cant deficiency compensation system and/or vehicles intended to operate with higher cant deficiency than stated in EN 14363:2005, Annex G

46. EN 15687:2010 21 November 2023 Railway applications – Testing for the acceptance of running characteristics of freight vehicles with static axle loads higher than 225 kN and up to 250 kN

47. EN 15734-1:2010 21 November 2023 Railway applications – Braking systems of high speed trains – Part 1: Requirements and definitions

48. EN 15734-2:2010 21 November 2023 Railway applications – Braking systems of high speed trains – Part 2: Test methods EN 15734-2:2010/AC:2012

49. EN 15746-1:2010+A1:2011 21 November 2023 Railway applications – Track – Road-rail machines and associated equipment – Part 1: Technical requirements for running and working

50. EN 15746-2:2010+A1:2011 21 November 2023 Railway applications – Track – Road-rail machines and associated equipment – Part 2: General safety requirements

51. EN 15806:2010 21 November 2023 Railway applications – Braking – Static brake testing

52. EN 15807:2011 21 November 2023 Railway applications – Pneumatic half couplings

53. EN 15892:2011 21 November 2023 Railway applications – Noise Emission – Measurement of noise inside driver’s cabs

54. EN 16116-1:2013 21 November 2023 Railway applications – Design requirements for steps, handrails and associated access for staff – Part 1: Passenger vehicles, luggage vans and locomotives 18/21 ELI: http://data.europa.eu/eli/dec_impl/2023/2584/ojEN OJ L, 21.11.2023 No Reference of the standard Date of withdrawal

55. EN 16116-2:2013 21 November 2023 Railway applications – Design requirements for steps, handrails and associated access for staff – Part 2: Freight wagons

56. EN 16185-1:2014 21 November 2023 Railway applications – Braking systems of multiple unit trains – Part 1:

Requirements and definitions

57. EN 16185-2:2014 21 November 2023 Railway applications – Braking systems of multiple unit trains – Part 2: Test methods

58. EN 16186-3:2016+A1:2018 21 November 2023 Railway applications – Driver’s cab – Part 3: Design of displays

59. EN 16207:2014 21 November 2023 Railway applications – Braking – Functional and performance criteria of Magnetic Track Brake systems for use in railway rolling stock

60. EN 16334:2014 21 November 2023 Railway applications – Passenger Alarm System – System requirements

61. EN 45545-2:2013+A1:2015 21 November 2023 Railway applications – Fire protection on railway vehicles – Part 2: Requirements for fire behaviour of materials and components

62. EN 50122-2:2010 21 November 2023 Railway applications – Fixed installations – Electrical safety, earthing and the return circuit – Part 2: Provisions against the effects of stray currents caused by d.c. traction systems

63. EN 50122-3:2010 21 November 2023 Railway applications – Fixed installations – Electrical safety, earthing and the return circuit – Part 3: Mutual Interaction of a.c. and d.c. traction systems

64. EN 50155:2007 21 November 2023 Railway applications – Electronic equipment used on rolling stock EN 50155:2007/AC:2010 EN 50155:2007/AC:2012

65. EN 50159:2010 21 November 2023 Railway applications – Communication, signalling and processing systems – Safety- related communication in transmission systems

ELI: http://data.europa.eu/eli/dec_impl/2023/2584/oj 19/21EN OJ L, 21.11.2023 No Reference of the standard Date of withdrawal

66. EN 50163:2004 21 November 2023 Railway applications – Supply voltages of traction systems EN 50163:2004/AC:2010 EN 50163:2004/AC:2013 EN 50163:2004/A1:2007

67. EN 50238-1:2003 21 November 2023 Railway applications – Compatibility between rolling stock and train detection systems – Part 1: General EN 50238-1:2003/AC:2014

68. EN 50317:2012 21 November 2023 Railway applications – Current collection systems – Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line EN 50317:2012/AC:2012

69. EN 50367:2012 21 November 2023 Railway applications – Current collection systems – Technical criteria for the interaction between pantograph and overhead line (to achieve free access) EN 50367:2012/AC:2013 EN 50367:2012/A1:2016

70. EN 50388:2012 21 November 2023 Railway Applications – Power supply and rolling stock – Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability EN 50388:2012/AC:2013

71. EN 50553:2012 21 November 2023 Railway applications – Requirements for running capability in case of fire on board of rolling stock EN 50553:2012/AC:2013 EN 50553:2012/A1:2016

72. EN 62580-1:2016 21 November 2023 Electronic railway equipment – On-board multimedia and telematic subsystems for railways – Part 1: General architecture (IEC 62580-1:2015) 20/21 ELI: http://data.europa.eu/eli/dec_impl/2023/2584/ojEN OJ L, 21.11.2023 ANNEX III No Reference of the standard Date of withdrawal

1. EN 14067-6:2018 21 November 2023 Railway applications – Aerodynamics – Part 6: Requirements and test procedures for cross wind assessment

2. EN 14198:2016+A1:2018 21 November 2023 Railway applications – Braking – Requirements for the brake system of trains hauled by locomotives

3. EN 50122-1:2011 21 November 2023 Railway applications – Fixed installations – Electrical safety, earthing and the return circuit – Part 1: Protective provisions against electric shock EN 50122-1:2011/A1:2011 EN 50122-1:2011/A2:2016 EN 50122-1:2011/A3:2016 EN 50122-1:2011/A4:2017 EN 50122-1:2011/AC:2012

4. EN 50318:2018 21 November 2023 Railway applications – Current collection systems – Validation of simulation of the dynamic interaction between pantograph and overhead contact line

ELI: http://data.europa.eu/eli/dec_impl/2023/2584/oj 21/21