Date: 2025-12-16Category: Not ApplicableState: Union GovernmentCountry: Europe
Commission Implementing Decision (EU) 2025/2519 of 15 December 2025 amending Implementing Decision (EU) 2023/740 as regards harmonised standards for olfactory board games, cosmetic kits and gustative games and on migration of certain elements from toys
**Executive Summary**
This is a Commission Implementing Decision (EU) 2025/2519 of 15 December 2025 amending Implementing Decision (EU) 2023/740 regarding harmonised standards for olfactory board games, cosmetic kits and gustative games and on migration of certain elements from toys. The references of EN 71-13:2021+A1:2022 and EN 71-3:2019+A1:2021 are withdrawn. The amendments to the Annex will apply from the date of publication of this decision, with the exception of point (1), which will apply from 16 June 2027.
**Key Points / Main Content**
* **Amendment:** The Annex to Implementing Decision (EU) 2023/740 is amended.
* Rows 3 and 9 of the Annex are deleted.
* The following rows are inserted into the Annex:
* '3a. EN 71-3:2019+A2:2024 Safety of toys - Part 3: Migration of certain elements'.
* '9a. EN 71-13:2021+A2:2024 Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games'.
* **Replacement of Standards:** EN 71-13:2021+A2:2024 and EN 71-3:2019+A2:2024 replace EN 71-13:2021+A1:2022 and 71-3:2019+A1:2021 respectively.
* **Entry into Force:** The Decision enters into force on the day of its publication in the Official Journal of the European Union.
* **Application Dates:**
* Point (1) of the Annex, regarding the deletion of rows 3 and 9, shall apply from 16 June 2027.
* Point (2) of the Annex, regarding the insertion of rows 3a and 9a, shall apply from the day of publication of this Decision in the Official Journal of the European Union.
**Impact Analysis**
**Toy Manufacturers**
* **Impact:** Toy manufacturers producing olfactory board games, cosmetic kits, gustative games, and toys with migration of certain elements need to comply with the updated harmonised standards EN 71-13:2021+A2:2024 and EN 71-3:2019+A2:2024.
* **Action Required:** Adapt their products to meet the revised specifications in the new standards. They also need to be aware of the delayed withdrawal of references for EN 71-13:2021+A1:2022 and 71-3:2019+A1:2021.
**European Committee for Standardisation (CEN)**
* **Impact:** CEN is responsible for drafting and revising harmonised standards for toys in support of Directive 2009/48/EC.
* **Action Required:** CEN has already completed the work of revising the harmonised standards as requested by the Commission Implementing Decision C(2022)7410.
**Member States**
* **Impact:** Ensure that toys placed on the market comply with the safety requirements of Directive 2009/48/EC.
* **Action Required:** Recognise that compliance with the revised harmonised standards EN 71-13:2021+A2:2024 and EN 71-3:2019+A2:2024 confers a presumption of conformity with the corresponding essential requirements of the Directive.
Key Entities Referenced
Directive 2009/48/EC: Directive on the safety of toys, setting out requirements for toys to be considered safe for use.
Implementing Decision (EU) 2023/740: The original Implementing Decision being amended regarding harmonised standards for toys.
Regulation (EU) No 1025/2012: Regulation on European standardisation, providing the legal framework for harmonised standards.
EN 71-3:2019+A2:2024: Harmonised standard on the safety of toys regarding the migration of certain elements.
EN 71-13:2021+A2:2024: Harmonised standard on the safety of toys regarding olfactory board games, cosmetic kits, and gustative games.
Official Journal EN
of the European Union L series
2025/2519 16.12.2025
COMMISSION IMPLEMENTING DECISION(EU) 2025/2519
of 15 December 2025
amending Implementing Decision (EU) 2023/740 as regards harmonised standards for olfactory
board games, cosmetic kits and gustative games and on migration of certain elements from toys
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on
European standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC,
95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament
and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European
Parliament and of the Council(1), and in particular Article 10(6) thereof,
Whereas:
(1) In accordance with Article 13 of Directive 2009/48/EC of the European Parliament and of the Council(2), toys which
are in conformity with harmonised standards or parts thereof, the references of which have been published in the
Official Journal of the European Union, are to be presumed to be in conformity with the requirements covered by those
standards or parts thereof set out in Article 10 of Directive 2009/48/EC and Annex II to that Directive.
(2) Directive 2009/48/EC lays down, in Part III of Annex II thereto, specific requirements in order to ensure that there are
no risks of adverse effects on human health due to exposure to the chemical substances or mixtures of which the toys
are composed or which they contain. Moreover, Article 10(2) lays down the general safety requirement.
(3) By Implementing Decision C(2022)7410(3), the Commission made a request to the European Committee for
Standardisation (CEN) and the European Committee for Electrotechnical Standardisation (Cenelec) for the drafting of
new and the revision of existing harmonised standards in support of Directive 2009/48/EC.
(4) On the basis of the request set out in Implementing Decision C(2022)7410, CEN revised harmonised standards EN
71-13:2021+A1:2022 ‘Safety of toys – Part 13: Olfactory board games, cosmetic kits and gustative games’ and EN
71-3:2019+A1:2021 ‘Safety of toys – Part 3:Migration of certain elements’, the references of which are published by
Commission Implementing Decision (EU) 2023/740(4). This resulted in the adoption of harmonised standards EN
71-13:2021+A2:2024 and EN 71-3:2019+A2:2024.
(5) The Commission, together with CEN, has assessed whether those standards comply with the request set out in
Implementing Decision C(2022) 7410.
(6) Harmonized standards EN 71-13:2021+A2:2024 and EN 71-3:2019+A2:2024 satisfy the requirements which they
aim to cover and which are set out in Directive 2009/48/EC. It is therefore appropriate to publish the references of
those standards in the Official Journal of the European Union.
(1) OJ L 316, 14.11.2012, p. 12, ELI: http://data.europa.eu/eli/reg/2012/1025/oj.
(2) Directive 2009/48/EC of the European Parliament and of the Council of 18 June 2009 on the safety of toys (OJ L 170, 30.6.2009, p. 1,
ELI: http://data.europa.eu/eli/dir/2009/48/oj).
(3) Commission Implementing Decision C(2022)7410 final of 24 October 2022 on a standardisation request to the European Committee
for Standardisation and the European Committee for Electrotechnical Standardisation as regards toys in support of
Directive 2009/48/EC of the European Parliament and of the Council.
(4) Commission Implementing Decision (EU) 2023/740 of 4 April 2023 on harmonised standards for toys drafted in support of
Directive 2009/48/EC of the European Parliament and of the Council (OJ L 96, 5.4.2023, p. 85, ELI: http://data.europa.eu/eli/
dec_impl/2023/740/oj).
ELI: http://data.europa.eu/eli/dec_impl/2025/2519/oj 1/3EN
OJ L, 16.12.2025
(7) The Annex to Implementing Decision (EU) 2023/740 lists the references of harmonised standards drafted in support
of Directive 2009/48/EC. To ensure that the references of harmonised standards drafted in support of
Directive 2009/48/EC are listed in one act, the references of EN 71-13:2021+A2:2024 and EN 71-3:2019+A2:2024
should be included in Implementing Decision (EU) 2023/740.
(8) Harmonised standard EN 71-13:2021+A2:2024 and EN 71-3:2019+A2:2024 replace harmonised standard EN
71-13:2021+A1:2022 and 71-3:2019+A1:2021 respectively. It is therefore necessary to withdraw the references of
those standards from the Official Journal of the European Union. In order to allow toy manufacturers sufficient time to
adapt their products to the revised specifications in standards EN 71-13:2021+A2:2024 and EN 71-3:2019
+A2:2024, it is necessary to defer the withdrawal of the references of harmonised standards EN 71-13:2021
+A1:2022 and 71-3:2019+A1:2021.
(9) Implementing Decision (EU) 2023/740 should therefore be amended accordingly.
(10) Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential
requirements set out in Union harmonisation legislation from the date of publication of the reference of such
standard in the Official Journal of the European Union. This Decision should therefore enter into force on the day of its
publication,
HAS ADOPTED THIS DECISION:
Article 1
The Annex to Implementing Decision (EU) 2023/740 is amended in accordance with the Annex to this Decision.
Article 2
This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.
Point (1) of the Annex shall apply from 16 June 2027.
Point (2) of the Annex shall apply from the day of publication of this Decision in the Official Journal of the European Union.
Done at Brussels, 15 December 2025.
For the Commission
The President
Ursula VON DER LEYEN
2/3 ELI: http://data.europa.eu/eli/dec_impl/2025/2519/ojEN
OJ L, 16.12.2025
ANNEX
The Annex to Implementing Decision (EU) 2023/740 is amended as follows:
(1) rows 3 and 9 are deleted;
(2) the following rows are inserted in sequential order:
No Reference of the standard
‘3a. 71-3:2019+A2:2024
Safety of toys – Part 3: Migration of certain elements’;
‘9a. EN 71-13:2021+A2:2024
Safety of toys – Part 13: Olfactory board games, cosmetic kits and gustative games’.
ELI: http://data.europa.eu/eli/dec_impl/2025/2519/oj 3/3