Date: 2018-12-14Category: Not ApplicableState: Union GovernmentCountry: Europe
Commission Implementing Regulation (EU) 2018/1981 of 13 December 2018 renewing the approval of the active substances copper compounds, as candidates for substitution, in accordance with Regulation (EC) No 1107/2009 of the European Parliament and of the Council concerning the placing of plant protection products on the market, and amending the Annex to Commission Implementing Regulation (EU) No 540/2011 (Text with EEA relevance.)
Issued by European Commission
· Directorate-General for Health and Food Safety
**Executive Summary:**
This Commission Implementing Regulation (EU) 2018/1981 renews the approval of copper compounds as active substances, designated as candidates for substitution, in accordance with Regulation (EC) No 1107/2009. It amends Implementing Regulation (EU) No 540/2011. The regulation comes into force three days after publication in the Official Journal of the European Union and applies from 1 January 2019. The approval is renewed until 31 December 2025.
**Key Points / Main Content:**
* **Renewal of Approval:** Copper compounds are renewed as active substances and candidates for substitution.
* **Amendment to Implementing Regulation (EU) No 540/2011:** The Annex to Implementing Regulation (EU) No 540/2011 is amended, deleting entry 277 in Part A and adding a new entry in Part E regarding copper compounds.
* **Restrictions and Conditions:**
* The total application of copper must not exceed 28 kg of copper per hectare over a 7-year period.
* Member States may decide to set a maximum annual application rate not exceeding 4 kg/ha of copper.
* Member States must consider operator, worker, and bystander safety, ensuring adequate personal protective equipment and mitigation measures.
* Water and non-target organism protection must be ensured, applying risk mitigation measures such as buffer zones.
* Authorized application amounts should not exceed the minimum necessary.
* Specific attention must be paid to the conclusions of the review report on copper compounds, particularly Appendices I and II.
* Limits are set for impurities such as Arsenic, Cadmium, Lead, Nickel, Cobalt, Mercury, Chromium and Antimony.
**Impact Analysis**
* **Member States:**
* *Impact:* Responsible for authorising plant protection products containing copper compounds, ensuring compliance with the restrictions and conditions outlined in the regulation. Must pay attention to operator, worker, and bystander safety, and the protection of water and non-target organisms. Have the option to set a maximum annual application rate for copper.
* *Action Required:* Implement and enforce the updated regulations, paying specific attention to the use restrictions, safety measures, and environmental protections. Integrate review report conclusions into assessments. Amend national regulations/guidelines as necessary.
* **Plant Protection Product Manufacturers/Applicants:**
* *Impact:* Can continue to market products containing copper compounds, subject to the renewed approval and associated restrictions. Must ensure products comply with the maximum application rates and impurity limits.
* *Action Required:* Update product labels and usage guidelines to reflect the new restrictions. Provide necessary information to Member States for authorisation.
* **Farmers/Users of Plant Protection Products:**
* *Impact:* Continued access to plant protection products containing copper compounds, but with usage restrictions. Required to adhere to application limits and implement safety measures.
* *Action Required:* Adjust application practices to comply with the maximum application rates (28 kg/ha over 7 years, with potential for a 4 kg/ha annual limit). Implement appropriate safety measures and use personal protective equipment.
* **European Food Safety Authority (EFSA):**
* *Impact:* EFSA's review report on copper compounds is referenced as a basis for the renewal and implementation of the regulation.
* *Action Required:* Continue to provide scientific advice and risk assessments related to copper compounds as needed.
Key Entities Referenced
European Union: A political and economic union of member states located primarily in Europe.
European Commission: An executive branch of the European Union responsible for proposing legislation, implementing decisions, upholding the EU treaties and managing the day-to-day business of the EU.
Regulation (EC) No 1107/2009: A regulation of the European Parliament and of the Council concerning the placing of plant protection products on the market.
Commission Implementing Regulation (EU) No 540/2011: A commission implementing regulation implementing Regulation (EC) No 1107/2009 of the European Parliament and of the Council as regards the list of approved active substances.
Copper compounds: Active substances being assessed for renewal of approval for use in plant protection products.
European Food Safety Authority: An agency of the European Union that provides independent scientific advice and communicates on existing and emerging risks associated with the food chain.
Standing Committee on Plants, Animals, Food and Feed: A committee within the European Union that provides opinions on measures related to plant health, animal health, food and feed safety.
Brussels: The location where the regulation was adopted.
L 317/16 EN Official Journal of the European Union 14.12.2018
COMMISSION IMPLEMENTING REGULATION (EU) 2018/1981
of 13 December 2018
renewing the approval of the active substances copper compounds, as candidates for substitution,
in accordance with Regulation (EC) No 1107/2009 of the European Parliament and of the Council
concerning the placing of plant protection products on the market, and amending the Annex to
Commission Implementing Regulation (EU) No 540/2011
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EC) No 1107/2009 of the European Parliament and of the Council of 21 October 2009
concerning the placing of plant protection products on the market and repealing Council Directives 79/117/EEC and
91/414/EEC (1), and in particular Article 24 in conjunction with Article 20(1) thereof,
Whereas:
(1) Commission Directive 2009/37/EC (2) included copper compounds as active substances in Annex I to Council
Directive 91/414/EEC (3).
(2) Active substances included in Annex I to Directive 91/414/EEC are deemed to have been approved under
Regulation (EC) No 1107/2009 and are listed in Part A of the Annex to Commission Implementing Regulation
(EU) No 540/2011 (4).
(3) The approval of the active substances copper compounds, as set out in Part A of the Annex to Implementing
Regulation (EU) No 540/2011, expires on 31 January 2019.
(4) An application for the renewal of the approval of copper compounds was submitted in accordance with Article 1
of Commission Implementing Regulation (EU) No 844/2012 (5) within the time period provided for in that
Article.
(5) The applicant submitted the supplementary dossiers required in accordance with Article 6 of Implementing
Regulation (EU) No 844/2012. The application was found to be complete by the rapporteur Member State.
(6) The rapporteur Member State prepared a renewal assessment report in consultation with the co-rapporteur
Member State and submitted it to the European Food Safety Authority (‘the Authority’) and the Commission on
16 December 2016.
(7) The Authority communicated the renewal assessment report to the applicant and to the Member States for
comments and forwarded the comments received to the Commission. The Authority also made the supple
mentary summary dossier available to the public.
(8) On 20 December 2017 the Authority communicated to the Commission its conclusions (6) on whether copper
compounds can be expected to meet the approval criteria provided for in Article 4 of Regulation (EC)
No 1107/2009. The Commission presented the draft renewal report for copper compounds to the Standing
Committee on Plants, Animals, Food and Feed on 25 May 2018.
(9) The applicant was given the opportunity to submit comments on the draft renewal report.
(1) OJ L 309, 24.11.2009, p. 1.
(2) Commission Directive 2009/37/EC of 23 April 2009 amending Council Directive 91/414/EEC to include chlormequat, copper
compounds, propaquizafop, quizalofop-P, teflubenzuron and zeta-permethrin as active substances (OJ L 104, 24.4.2009, p. 23).
(3) Council Directive 91/414/EEC of 15 July 1991 concerning the placing of plant protection products on the market (OJ L 230, 19.8.1991,
p. 1).
(4) Commission Implementing Regulation (EU) No 540/2011 of 25 May 2011 implementing Regulation (EC) No 1107/2009 of the
European Parliament and of the Council as regards the list of approved active substances (OJ L 153, 11.6.2011, p. 1).
(5) Commission Implementing Regulation (EU) No 844/2012 of 18 September 2012 setting out the provisions necessary for the implemen
tation of the renewal procedure for active substances, as provided for in Regulation (EC) No 1107/2009 of the European Parliament and
of the Council concerning the placing of plant protection products on the market (OJ L 252, 19.9.2012, p. 26).
(6) EFSA (European Food Safety Authority), 2018. Conclusion on the peer review of the pesticide risk assessment of the active substance
copper compounds EFSA Journal 2018;16(1):5152.14.12.2018 EN Official Journal of the European Union L 317/17
(10) It has been established with respect to one or more representative uses of at least one product for each of the
copper compounds that the approval criteria provided for in Article 4 of Regulation (EC) No 1107/2009 are
satisfied. It is therefore appropriate to renew the approval of copper compounds.
(11) The risk assessment for the renewal of the approval of copper compounds is based on a limited number of rep
resentative uses, which however do not restrict the uses for which plant protection products containing copper
compounds may be authorised. It is therefore appropriate to remove the restriction for use only as fungicide and
bactericide.
(12) The Commission, however, considers that copper compounds are candidates for substitution pursuant to
Article 24 of Regulation (EC) No 1107/2009. Copper compounds are persistent and toxic substances in
accordance with points 3.7.2.1 and 3.7.2.3, respectively, of Annex II to Regulation (EC) No 1107/2009, given
that the half-life in soil is greater than 120 days and the long-term no-observed effect concentration for aquatic
organisms is less than 0,01 mg/L. Copper compounds therefore fulfil the condition set in the second indent of
point 4 of Annex II to Regulation (EC) No 1107/2009.
(13) It is therefore appropriate to renew the approval of copper compounds as candidates for substitution pursuant to
Article 24 of Regulation (EC) No 1107/2009.
(14) In accordance with Article 14(1) of Regulation (EC) No 1107/2009 in conjunction with Article 6 thereof, and, in
the light of current scientific and technical knowledge, it is, however, necessary to include certain conditions and
restrictions.
(15) It is, in particular, appropriate to restrict the use of plant protection products containing copper compounds to
a maximum application rate of 28 kg/ha of copper over a period of 7 years (i.e. on average 4 kg/ha/year) in
order to minimise the potential accumulation in soil and the exposure for not target organisms, while taking into
account agro-climatic conditions occurring periodically in Member States leading to an increase of the fungal
pressure. When authorising products Member States should pay attention to certain issues and strive for the
minimisation of application rates.
(16) It is also appropriate to limit the maximum content of certain impurities of toxicological concern.
(17) The Annex to Implementing Regulation (EU) No 540/2011 should therefore be amended accordingly.
(18) Commission Implementing Regulation (EU) 2018/84 (1) extended the approval period of copper compounds to
31 January 2019 in order to allow the renewal process to be completed before the expiry of the approval of
these substances. However, given that a decision on renewal has been taken ahead of this extended expiry date,
this Regulation should apply from 1 January 2019.
(19) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on
Plants, Animals, Food and Feed,
HAS ADOPTED THIS REGULATION:
Article 1
Renewal of the approval of the active substances as candidates for substitution
The approval of the active substances copper compounds, as a candidate for substitution, is renewed as set out in
Annex I.
Article 2
Amendments to Implementing Regulation (EU) No 540/2011
The Annex to Implementing Regulation (EU) No 540/2011 is amended in accordance with Annex II to this Regulation.
(1) Commission Implementing Regulation (EU) 2018/84 of 19 January 2018 amending Implementing Regulation (EU) No 540/2011 as
regards the extension of the approval periods of the active substances chlorpyrifos, chlorpyrifos-methyl, clothianidin, copper
compounds, dimoxystrobin, mancozeb, mecoprop-p, metiram, oxamyl, pethoxamid, propiconazole, propineb, propyzamide, pyraclos
trobin and zoxamide (OJ L 16, 20.1.2018, p. 8).L 317/18 EN Official Journal of the European Union 14.12.2018
Article 3
Entry into force and date of application
This Regulation shall enter into force on the third day following that of its publication in the Official Journal of the
European Union.
It shall apply from 1 January 2019.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 13 December 2018.
For the Commission
The President
Jean-Claude JUNCKERANNEX I
Common Name, Date of Expiration of
IUPAC Name Purity(1) Specific provisions
Identification Numbers approval approval
Copper compounds: 1 January 31 December Only uses resulting in a total application of maximum 28 kg of copper per
2019 2025 hectare over a period of 7 years shall be authorised.
Copper hydroxide CAS Copper (II) ≥ 573 g/kg
No 20427-59-2 CIPAC hydroxide For the implementation of the uniform principles, as referred to in
No 44.305 Article 29(6) of Regulation (EC) No 1107/2009 of the European Parliament
and of the Council, the conclusions of the review report on copper com
Copper oxychloride Dicopper ≥ 550 g/kg
pounds and in particular Appendices I and II thereto, shall be taken into ac
CAS No 1332-65-6 chloride
count.
or 1332-40-7 CIPAC trihydroxide
No 44.602 In their overall assessment Member States shall pay particular attention to:
Copper oxide CAS Copper oxide ≥ 820 g/kg — the operator, worker and bystander safety and ensure that conditions of
No 1317-39-1 CIPAC use prescribe the application of adequate personal protective equipment
No 44.603 and other mitigation measures as appropriate;
Bordeaux mixture CAS Not allocated ≥ 245 g/kg — the protection of water and non-target organisms. In relation to these
No 8011-63-0 CIPAC identified risks, risk mitigation measures, such as buffer zones, shall be
No 44.604 applied where appropriate;
Tribasic copper Not allocated ≥ 490 g/kg — the amount of active substance applied and ensure that the authorised
sulphate CAS amounts, in terms of rates and number of applications, do not exceed
The following impurities shall
No 12527-76-3 CIPAC the minimum necessary to achieve the desired effects and do not cause
not exceed the following levels:
No 44.306 any unacceptable effect on the environment taking into account back
Arsenic max. 0,1 mg/g Cu ground levels of copper at the application site, and, where the informa
Cadmium max. 0,1 mg/g Cu tion is available, copper input from other sources. Member States may
in particular decide to set a maximum annual application rate not ex
Lead max. 0,3 mg/g Cu
ceeding 4 kg/ha of copper.
Nickel max. 1 mg/g Cu
Cobalt max. 3 mg/kg
Mercury max. 5 mg/kg
Chromium max. 100 mg/kg
Antimony max. 7 mg/kg
(1) Further details on identity and specification of active substance are provided in the review report.
14.12.2018
EN
Official
Journal
of
the
European
Union
L
317/19ANNEX II
The Annex to Implementing Regulation (EU) No 540/2011 is amended as follows:
(1) in Part A, entry 277 on copper compounds is deleted;
(2) in Part E, the following entry is added:
Common Name, Date of Expiration of
No. IUPAC Name Purity(1) Specific provisions
Identification Numbers approval approval
‘10 Copper compounds: 1 January 31 December Only uses resulting in a total application of maximum 28 kg of
2019 2025 copper per hectare over a period of 7 years shall be authorised.
Copper hydroxide Copper (II) ≥ 573 g/kg
For the implementation of the uniform principles, as referred to
CAS No 20427-59-2 hydroxide
in Article 29(6) of Regulation (EC) No 1107/2009 of the Euro
CIPAC No 44.305
pean Parliament and of the Council, the conclusions of the re
view report on copper compounds and in particular Appendices I
Copper oxychloride Dicopper ≥ 550 g/kg and II thereto, shall be taken into account.
CAS No 1332-65-6 chloride
In their overall assessment Member States shall pay particular at
or 1332-40-7 CIPAC trihydroxide
tention to:
No 44.602
— the operator, worker and bystander safety and ensure that
Copper oxide CAS Copper oxide ≥ 820 g/kg conditions of use prescribe the application of adequate per
No 1317-39-1 CIPAC sonal protective equipment and other mitigation measures as
No 44.603 appropriate;
— the protection of water and non-target organisms. In relation
Bordeaux mixture Not allocated ≥ 245 g/kg to these identified risks, risk mitigation measures, such as
CAS No 8011-63-0 buffer zones, shall be applied where appropriate;
CIPAC No 44.604
— the amount of active substance applied and ensure that the
authorised amounts, in terms of rates and number of applica
Tribasic copper Not allocated ≥ 490 g/kg
tions, do not exceed the minimum necessary to achieve the
sulphate CAS
The following impurities shall desired effects and do not cause any unacceptable effect on
No 12527-76-3
not exceed the following levels: the environment taking into account background levels of
CIPAC No 44.306
copper at the application site, and, where the information is
Arsenic max. 0,1 mg/g Cu
available, copper input from other sources. Member States
Cadmium max. 0,1 mg/g Cu may in particular decide to set a maximum annual applica
Lead max. 0,3 mg/g Cu tion rate not exceeding 4 kg/ha of copper.’
Nickel max. 1 mg/g Cu
Cobalt max. 3 mg/kg
Mercury max. 5 mg/kg
Chromium max. 100 mg/kg
Antimony max. 7 mg/kg
(1) Further details on identity and specification of active substance are provided in the review report.
L
317/20
EN
Official
Journal
of
the
European
Union
14.12.2018