Commission Implementing Regulation (EU) 2024/2651 of 10 October 2024 granting a Union authorisation for the biocidal product family Taski-Room Care-Suma Family based on Lactic Acid in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council

Official Journal EN of the European Union L series 2024/2651 11.10.2024 COMMISSION IMPLEMENTING REGULATION (EU) 2024/2651 of 10 October 2024 granting a Union authorisation for the biocidal product family ‘Taski-Room Care-Suma Family based on Lactic Acid’ in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012concerning the making available on the market and use of biocidal products(1), and in particular Article 44(5), first subparagraph, thereof, Whereas: (1) On 16 April 2019, Diversey Europe Operations B.V submitted to the European Chemicals Agency (‘the Agency’) an application in accordance with Article 43(1) of Regulation (EU) No 528/2012 for Union authorisation of a biocidal product family named ‘Taski-Room Care-Suma Family based on Lactic Acid’ of product-types 2, 3 and 4, as described in Annex V to that Regulation, providing written confirmation that the competent authority of Latvia had agreed to evaluate the application. The application was recorded under case number BC-FV051273-25 in the Register for Biocidal Products. (2) ‘Taski-Room Care-Suma Family based on Lactic Acid’ contains L-(+)-Lactic acid as the active substance, included in the Union list of approved active substances referred to in Article 9(2) of Regulation (EU) No 528/2012 for product-types 2, 3 and 4. (3) On 28 February 2023, the evaluating competent authority submitted, in accordance with Article 44(1) of Regulation (EU) No 528/2012, an assessment report and the conclusions of its evaluation to the Agency. (4) On 2 October 2023, the Agency submitted to the Commission its opinion(2), the draft summary of the biocidal product characteristics (‘SPC’) of ‘Taski-Room Care-Suma Family based on Lactic Acid’ and the final assessment report on the biocidal product family, in accordance with Article 44(3) of Regulation (EU) No 528/2012. (5) The opinion concludes that ‘Taski-Room Care-Suma Family based on Lactic Acid’ is a biocidal product family within the meaning of Article 3(1), point (s), of Regulation (EU) No 528/2012, that it is eligible for Union authorisation in accordance with Article 42(1) of that Regulation and that, subject to compliance with the draft SPC, it meets the conditions laid down in Article 19(1) and (6) of that Regulation. (6) On 18 October 2023, the Agency transmitted to the Commission the draft SPC in all the official languages of the Union in accordance with Article 44(4) of Regulation (EU) No 528/2012. (7) The Commission concurs with the opinion of the Agency and considers it therefore appropriate to grant a Union authorisation for the biocidal product family ‘Taski-Room Care-Suma Family based on Lactic Acid’. (8) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products, (1) OJ L 167, 27.6.2012, p. 1, http://data.europa.eu/eli/reg/2012/528/oj. (2) ECHA opinion of 14/9/2023 on the Union authorisation of ‘Taski-Room Care-Suma Family based on Lactic Acid’ (ECHA/BPC/394/2023), https://echa.europa.eu/opinions-on-union-authorisation. ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 1/59EN OJ L, 11.10.2024 HAS ADOPTED THIS REGULATION: Article 1 A Union authorisation with authorisation number EU-0031644-0000 is hereby granted to Diversey Europe Operations B.V for the making available on the market and use of the biocidal product family ‘Taski-Room Care-Suma Family Based on Lactic Acid’ subject to compliance with the terms and conditions set out in the Annex. The Union authorisation is valid from 31 October 2024until 30 September 2034. Article 2 This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 10 October 2024. For the Commission The President Ursula VON DER LEYEN 2/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 ANNEX Summary of product characteristics for a biocidal product family Taski-Room Care-Suma Family Based on Lactic Acid Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene Authorisation number EU-0031644-0000 R4BP asset number EU-0031644-0000 PART I. FIRST INFORMATION LEVEL 1. ADMINISTRATIVE INFORMATION 1.1. Family name Name Taski-Room Care-Suma Family Based on Lactic Acid 1.2. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene 1.3. Authorisation holder Name Diversey Europe Operations B.V. Name and address of the authorisation holder Address Regulatory team Maarssenbroeksedijk 2 3542 DN Utrecht NL Authorisation number EU-0031644-0000 R4BP asset number EU-0031644-0000 Date of the authorisation 31 October 2024 Expiry date of the authorisation 30 September 2034 1.4. Manufacturer(s) of the product Name of manufacturer Diversey Europe Operations B.V. Address of manufacturer Maarssenbroeksedijk 2 3542DN Utrecht Netherlands (the) ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 3/59EN OJ L, 11.10.2024 Location of manufacturing sites Diversey Europe Operations B.V. site 1 Strada Statale 235 26010 Bagnolo Cremasco (CR) Italy Diversey Europe Operations B.V. site 2 Rembrandtlaan 414 7545 ZW Enschede Netherlands (the) Diversey Europe Operations B.V. site 3 Cotes Park Industrial Estate DE55 4PA Somercotes Alfreton United Kingdom of Great Britain and Northern Ireland (the) Diversey Europe Operations B.V. site 4 Avenida Conde Duque 5, 7 y 9 ; Poligono Industrial La Postura 28343 Valdemoro (Madrid) Spain Diversey Europe Operations B.V. site 5 Morschheimer Strasse 12 67292 Kirchheimbolanden Germany Name of manufacturer Multifill B.V. Address of manufacturer Constructieweg 25-A 3641 SB Mijdrecht Netherlands (the) Location of manufacturing sites Multifill B.V. site 1 Constructieweg 25-A 3641 SB Mijdrecht Netherlands (the) Name of manufacturer Ionic Products Ltd Address of manufacturer Blaris Industrial Estate, Altona Road BT27 5QB Lisburn Ireland Location of manufacturing sites Ionic Products Ltd site 1 Blaris Industrial Estate, Altona Road BT27 5QB Lisburn Ireland Name of manufacturer Aerosol Service Sp. z o.o. Address of manufacturer Charnowo 3676-270 Ustka Poland Location of manufacturing sites Aerosol Service Sp. z o.o. site 1 Charnowo 3676-270 Ustka Poland Name of manufacturer Orvema B.V. Address of manufacturer Westkanaaldijk 26-I 3606 AM Maarssen Netherlands (the) Location of manufacturing sites Orvema B.V. site 1 Westkanaaldijk 26-I 3606 AM Maarssen Netherlands (the) Name of manufacturer Cheport spol s.r.o. Address of manufacturer Lhotsko 93 76312 Vizovice Czechia Location of manufacturing sites Cheport spol s.r.o. site 1 Lhotsko 93 76312 Vizovice Czechia 4/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 Name of manufacturer Helichem B.V. Address of manufacturer Kozakkenberg 5 5951 DL Belfeld Netherlands (the) Location of manufacturing sites Helichem B.V. site 1 Kozakkenberg 5 5951 DL Belfeld Netherlands (the) Name of manufacturer Pluswipes LTD Address of manufacturer Pywell Rd, Willowbrook, East Industrial Estate NN17 5XJ Corby United Kingdom of Great Britain and Northern Ireland (the) Location of manufacturing sites Pluswipes LTD site 1 Pywell Rd, Willowbrook, East Industrial Estate NN17 5XJ Corby United Kingdom of Great Britain and Northern Ireland (the) 1.5. Manufacturer(s) of the active substance(s) Active substance L-(+)-lactic acid Name of manufacturer Purac Biochem bv Address of manufacturer Arkelsedijk 46 4206 AC Gorinchem Netherlands (the) Location of manufacturing sites Purac Biochem bv site 1 Gran Vial 19-25 08160 Montmelo Spain Active substance L-(+)-lactic acid Name of manufacturer Jungbunzlauer S.A. Address of manufacturer Z.I. el Portuaire, B.P. 32 67390 Marckolsheim France Location of manufacturing sites Jungbunzlauer S.A. site 1 Z.I. el Portuaire, B.P. 32 67390 Marckolsheim France 2. PRODUCT FAMILY COMPOSITION AND FORMULATION 2.1. Qualitative and quantitative information on the composition of the family Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 0,352- 17,6% (w/w) substance Methanesulfonic Non-Active 75-75-2 200-898-6 0- 5,11% (w/w) acid substance Alkyl ether Non-Active 53563-70-5 0- 9% (w/w) carboxylic acid substance Sulphonic acids, Non-Active 97489-15-1 307-055-2 0- 3% (w/w) C14-17-sec- substance alkane, sodium salts ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 5/59EN OJ L, 11.10.2024 A mixture of: Non-Active 414-420-0 0- 3,9% (w/w) 2-ethylhexyl substance mono-D- glucopyranoside; 2-ethylhexyl di-D- glucopyranoside 2.2. Type(s) of formulation Formulation type(s) AL Any other liquid SL Soluble concentrate PART II. SECOND INFORMATION LEVEL - META SPC(S) 1. META SPC 1 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 1 identifier Identifier Meta SPC: Meta SPC 1 1.2. Suffix to the authorisation number Number 1-1 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene 2. META SPC 1 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 17,6- 17,6% (w/w) substance Methanesulfonic Non-Active 75-75-2 200-898-6 5,11- 5,11% (w/w) acid substance Alkyl ether Non-Active 53563-70-5 9- 9% (w/w) carboxylic acid substance 6/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 Sulphonic acids, Non-Active 97489-15-1 307-055-2 3- 3% (w/w) C14-17-sec- substance alkane, sodium salts A mixture of: Non-Active 414-420-0 3,9- 3,9% (w/w) 2-ethylhexyl substance mono-D- glucopyranoside; 2-ethylhexyl di-D- glucopyranoside 2.2. Type(s) of formulation of the meta SPC 1 Formulation type(s) SL Soluble concentrate 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1 Hazard statements H314: Causes severe skin burns and eye damage. H290: May be corrosive to metals. EUH071: Corrosive to the respiratory tract. Precautionary statements P260: Do not breathe vapours. P280: Wear protective gloves, protective clothing, eye protection, face protection. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a doctor or a physician. P405: Store locked up. P501: Dispose of contents in accordance with national regulations. P501: Dispose of container in accordance with national regulations. P234: Keep only in original packaging. P321: Specific treatment (see instruction on this label). ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 7/59EN OJ L, 11.10.2024 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Use # 1a - Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport) Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses Common name: Enveloped viruses Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilution (%): Dilute the product to 2% v/v (2 ml product, add water up to 100 ml). Number and timing of application: Contact time: Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes Category(ies) of users professional 8/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene; PA - Polyamide) 4.1.1. Use-specific instructions Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.1.2. Use-specific risk mitigation measures See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2. Use description Table 2 Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 9/59EN OJ L, 11.10.2024 Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilution (%): Dilute the product to 2% v/v (2 ml product, add water up to 100 ml). Number and timing of application: Contact time: 15 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE, 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.2.1. Use-specific instructions Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.2.2. Use-specific risk mitigation measures See general directions for use. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 10/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 4.3. Use description Table 3 Use # 2 - Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area) Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area). Application method(s) Method: manual application Detailed description: Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2). Dilution (%): Dilute the product to 2% v/v (2 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 11/59EN OJ L, 11.10.2024 4.3.1. Use-specific instructions Remove gross soiling and pre-clean the surface before applying the product. Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.3.2. Use-specific risk mitigation measures See general directions for use. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.4. Use description Table 4 Use # 3 - Disinfection of clean hard non-porous surfaces and small objects in a veterinary area Product type PT03: Veterinary hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces and small objects in a veterinary area. Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. 12/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,57% w/w. This is a 3% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected for 5 minutes and apply approx. 19 sprays /m2 or 25 ml/m2 for 30 minutes). Dilution (%): Dilute the product to 3% v/v (3 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes at room temperature (18-25 °C); 30 minutes at 10 °C Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.4.1. Use-specific instructions Remove gross soiling and pre-clean the surface before applying the product. Dilute the product with potable water to 3,0% (3 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes at room temperature or for 30 minutes at 10°C. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.4.2. Use-specific risk mitigation measures See general directions for use. 4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 13/59EN OJ L, 11.10.2024 4.5. Use description Table 5 Use # 4 – Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area). For example, ice-cream and shake machines, open plant cleaning in food factories or hard surfaces in kitchens. Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,57% w/w. This is a 3% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilution (%): Dilute the product to 3% v/v (3 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 14/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 4.5.1. Use-specific instructions Dilute the product with potable water to 3,0% (3 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.5.2. Use-specific risk mitigation measures See general directions for use. 4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 1 5.1. Instructions for use Comply with the instructions for use. Inform the authorisation holder if the treatment is ineffective. 5.2. Risk mitigation measures Wear protective chemical resistant gloves classified under EN 374 or equivalent, face protection consistent with EN 16321 or equivalent and a coverall consistent with EN 14605 or equivalent when handling the concentrate product (during dilution). The full texts of the EN standards are available in Section 6. Personal protective equipment (PPE) material to be specified by the authorisation holder within the product information. This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. Do not breathe vapour. Avoid contact with eyes and skin. Avoid splashes and spills during mixing and loading (dilution). Wash hands after handling. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a Poison Centre or a doctor. IF ON SKIN: Immediately wash with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance. ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 15/59EN OJ L, 11.10.2024 Information to Healthcare personnel/doctor: the eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. IF SWALLOWED: Immediately rinse mouth. Do NOT induce vomiting. Give something to drink, if exposed person is able to swallow. Call 112 or an ambulance for medical assistance. 5.4. Instructions for safe disposal of the product and its packaging Dispose of unused product, its packaging and all other waste in accordance with local regulations. Do not discharge unused product on the ground, into water sources, into pipes nor down the drains. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Store in original container tightly closed. Store protected from light. Do not store above 40 °C. Shelf- life: 2 years. 6. OTHER INFORMATION The full titles of the EN standards referenced in section 5.2 “Risk mitigation measures” are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]). Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) TASKI Sani Market area: EU 4 in 1 Plus Authorisation number EU-0031644-0001 1-1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active substance 79-33-4 201-196-2 17,6% (w/w) Methanesulfonic Non-Active 75-75-2 200-898-6 5,11% (w/w) acid substance Alkyl ether Non-Active 53563-70-5 9% (w/w) carboxylic acid substance Sulphonic acids, Non-Active 97489-15-1 307-055-2 3% (w/w) C14-17-sec- substance alkane, sodium salts 16/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 A mixture of: Non-Active 414-420-0 3,9% (w/w) 2-ethylhexyl substance mono-D- glucopyranoside; 2-ethylhexyl di-D- glucopyranoside 7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ANDY Market area: EU MultiPower Conc Professional ANDYSAN Market area: EU MultiPower Conc Professional CIF Market area: EU MultiPower Conc Professional Cif 4in1 Market area: EU Cleaner Disinfectant Concentrate DOMESTOS Market area: EU MultiPower Conc Professional Domestos Market area: EU 4in1 Cleaner Disinfectant Concentrate FLORASZEPT Market area: EU MultiPower Conc Professional GLORIX Market area: EU MultiPower Conc Professional Glorix 4in1 Market area: EU Cleaner Disinfectant Concentrate ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 17/59EN OJ L, 11.10.2024 JIF MultiPower Market area: EU Conc Professional KLINEX Market area: EU MultiPower Conc Professional Klinex 4in1 Market area: EU Cleaner Disinfectant Concentrate LIFEBUOY Market area: EU MultiPower Conc Professional LYSOFORM Market area: EU MultiPower Conc Professional Lysoform 4in1 Market area: EU Cleaner Disinfectant Concentrate Metro Prof. 4 Market area: EU in 1 Plus Conc OPTIMAX 4 Market area: EU in 1 Plus Conc SAVO Market area: EU MultiPower Conc Professional Suma San 4in1 Market area: EU D10.7 SUPERANDY Market area: EU MultiPower Conc Professional TASKI Sani 4 Market area: EU in 1 Plus Conc VISS Market area: EU MultiPower Conc Professional 18/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 Viss 4in1 Market area: EU Cleaner Disinfectant Concentrate We Clean 4 Market area: EU in 1 Plus Conc Authorisation number EU-0031644-0002 1-1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 17,6% (w/w) substance Methanesulfonic Non-Active 75-75-2 200-898-6 5,11% (w/w) acid substance Alkyl ether Non-Active 53563-70-5 9% (w/w) carboxylic acid substance Sulphonic acids, Non-Active 97489-15-1 307-055-2 3% (w/w) C14-17-sec- substance alkane, sodium salts A mixture of: Non-Active 414-420-0 3,9% (w/w) 2-ethylhexyl substance mono-D- glucopyranoside; 2-ethylhexyl di-D- glucopyranoside 7.3. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Divosan Market area: EU Freed Conc SANO- Market area: EU Premium- Plus Suma Ice & Market area: EU Shake Sanitizer Sure Ice & Market area: EU Shake Sanitizer ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 19/59EN OJ L, 11.10.2024 Sure Market area: EU Sanitizer SURE Market area: EU Sanitizer A TASKI Sani Market area: EU 4 in 1 FREE Conc TASKI Sani Market area: EU 4 in 1 ZERO Conc Authorisation number EU-0031644-0003 1-1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 17,6% (w/w) substance Methanesulfonic Non-Active 75-75-2 200-898-6 5,11% (w/w) acid substance Alkyl ether Non-Active 53563-70-5 9% (w/w) carboxylic acid substance Sulphonic acids, Non-Active 97489-15-1 307-055-2 3% (w/w) C14-17-sec- substance alkane, sodium salts A mixture of: Non-Active 414-420-0 3,9% (w/w) 2-ethylhexyl substance mono-D- glucopyranoside; 2-ethylhexyl di-D- glucopyranoside 7.4. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) SURE Market area: EU Sanitizer B Authorisation number EU-0031644-0004 1-1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 17,6% (w/w) substance 20/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 Methanesulfo- Non-Active 75-75-2 200-898-6 5,11% (w/w) nic acid substance Alkyl ether Non-Active 53563-70-5 9% (w/w) carboxylic acid substance Sulphonic acids, Non-Active 97489-15-1 307-055-2 3% (w/w) C14-17-sec- substance alkane, sodium salts A mixture of: Non-Active 414-420-0 3,9% (w/w) 2-ethylhexyl substance mono-D- glucopyrano- side; 2-ethylhexyl di-D- glucopyrano- side 7.5. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) SURE Market area: EU Sanitizer C Sure Market area: EU Sanitizer 4in1 Sure Market area: EU Sanitizer 4in1 Fresh Authorisation number EU-0031644-0005 1-1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 17,6% (w/w) substance Methanesulfonic Non-Active 75-75-2 200-898-6 5,11% (w/w) acid substance Alkyl ether Non-Active 53563-70-5 9% (w/w) carboxylic acid substance Sulphonic acids, Non-Active 97489-15-1 307-055-2 3% (w/w) C14-17-sec- substance alkane, sodium salts ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 21/59EN OJ L, 11.10.2024 A mixture of: Non-Active 414-420-0 3,9% (w/w) 2-ethylhexyl substance mono-D- glucopyranoside; 2-ethylhexyl di-D- glucopyranoside 1. META SPC 2 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 2 identifier Identifier Meta SPC: Meta SPC 2 1.2. Suffix to the authorisation number Number 1-2 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene 2. META SPC 2 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 2 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 17,6- 17,6% (w/w) substance Methanesulfonic Non-Active 75-75-2 200-898-6 5,11- 5,11% (w/w) acid substance Alkyl ether Non-Active 53563-70-5 9- 9% (w/w) carboxylic acid substance Sulphonic acids, Non-Active 97489-15-1 307-055-2 3- 3% (w/w) C14-17-sec- substance alkane, sodium salts A mixture of: Non-Active 414-420-0 3,9- 3,9% (w/w) 2-ethylhexyl substance mono-D- glucopyranoside; 2-ethylhexyl di-D- glucopyranoside 22/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 2.2. Type(s) of formulation of the meta SPC 2 Formulation type(s) SL Soluble concentrate 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2 Hazard statements H314: Causes severe skin burns and eye damage. H290: May be corrosive to metals. EUH071: Corrosive to the respiratory tract. EUH208: Contains Ethyl 2,3-epoxy-3-phenylbutyrate, Delta-damascone and Damascone. May produce an allergic reaction. Precautionary statements P260: Do not breathe vapours. P280: Wear protective gloves, protective clothing, eye protection, face protection. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a doctor or a physician. P405: Store locked up. P501: Dispose of contents in accordance with national regulations. P501: Dispose of container in accordance with national regulations. P234: Keep only in original packaging. P321: Specific treatment (see instruction on this label). 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Use # 1a - Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport) Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 23/59EN OJ L, 11.10.2024 Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses Common name: Enveloped viruses Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution fo the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilution (%): Dilute the product to 2% v/v (2 ml product, add water up to 100 ml). Number and timing of application: Contact time: Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide) 4.1.1. Use-specific instructions Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 24/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 4.1.2. Use-specific risk mitigation measures See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2. Use description Table 2 Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilution (%): Dilute the product to 2% v/v (2 ml product, add water up to 100 ml). Number and timing of application: Contact time: 15 minutes ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 25/59EN OJ L, 11.10.2024 Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.2.1. Use-specific instructions Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.2.2. Use-specific risk mitigation measures See general directions for use. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.3. Use description Table 3 Use # 2 – Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area) Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data 26/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 Field(s) of use indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area). Application method(s) Method: manual application Detailed description: Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2). Dilution (%): Dilute the product to 2% v/v (2 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.3.1. Use-specific instructions Remove gross soiling and pre-clean the surface before applying the product. Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.3.2. Use-specific risk mitigation measures See general directions for use. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 27/59EN OJ L, 11.10.2024 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.4. Use description Table 4 Use # 3 - Disinfection of clean hard non-porous surfaces and small objects in a veterinary area Product type PT03: Veterinary hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces and small objects in a veterinary area. Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,57% w/w. This is a 3% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected for 5 minutes and apply approx. 19 sprays /m2 or 25 ml/m2 for 30 minutes). Dilution (%): Dilute the product to 3% v/v (3 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes at room temperature (18-25 °C); 30 minutes at 10 °C Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 28/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 4.4.1. Use-specific instructions Remove gross soiling and pre-clean the surface before applying the product. Dilute the product with potable water to 3,0% (3 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product.The solution for dipping shall be used only once. Leave wet for 5 minutes at room temperature or for 30 minutes at 10°C. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.4.2. Use-specific risk mitigation measures See general directions for use. 4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.5. Use description Table 5 Use # 4 – Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area). For example, ice-cream and shake machines, open plant cleaning in food factories or hard surfaces in kitchens. ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 29/59EN OJ L, 11.10.2024 Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,57% w/w. This is a 3% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilution (%): Dilute the product to 3% v/v (3 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.5.1. Use-specific instructions Dilute the product with potable water to 3,0% (3 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.5.2. Use-specific risk mitigation measures See general directions for use. 4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 30/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 2 5.1. Instructions for use Comply with the instructions for use. Inform the authorisation holder if the treatment is ineffective. 5.2. Risk mitigation measures Wear protective chemical resistant gloves classified under EN 374 or equivalent, face protection consistent with EN 16321 or equivalent and a coverall consistent with EN 14605 or equivalent when handling the concentrate product (during dilution). The full texts of the EN standards are available in Section 6. Personal protective equipment (PPE) material to be specified by the authorisation holder within the product information. This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. Do not breathe vapour. Avoid contact with eyes and skin. Avoid splashes and spills during mixing and loading (dilution). Wash hands after handling. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a Poison Centre or a doctor. IF ON SKIN: Immediately wash with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance. Information to Healthcare personnel/doctor: the eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. IF SWALLOWED: Immediately rinse mouth. Do NOT induce vomiting. Give something to drink, if exposed person is able to swallow. Call 112 or an ambulance for medical assistance. 5.4. Instructions for safe disposal of the product and its packaging Dispose of unused product, its packaging and all other waste in accordance with local regulations. Do not discharge unused product on the ground, into water sources, into pipes nor down the drains. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Store in original container tightly closed. Store protected from light. Do not store above 40 °C. Shelf- life: 2 years. ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 31/59EN OJ L, 11.10.2024 6. OTHER INFORMATION The full titles of the EN standards referenced in section 5.2 “Risk mitigation measures” are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]). Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Sure Market area: EU Freshener Conc Sure Market area: EU Freshener 7X Conc Sure Market area: EU Sanitiser Conc Sure Market area: EU Sanitiser 2X Conc TASKI Sani Market area: EU 4 in 1 Freshener Conc TASKI Sani Market area: EU 4 in 1 Freshener Concen- trate Zenith Market area: EU Freshener Conc Zenith Market area: EU Freshener 7X Conc Zenith Market area: EU Sanitiser Conc 32/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 Zenith Market area: EU Sanitiser 2X Conc 7X Market area: EU FRESH- ENER CONCEN- TRATE Authorisation number EU-0031644-0006 1-2 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 17,6% (w/w) substance Methanesulfonic Non-Active 75-75-2 200-898-6 5,11% (w/w) acid substance Alkyl ether Non-Active 53563-70-5 9% (w/w) carboxylic acid substance Sulphonic acids, Non-Active 97489-15-1 307-055-2 3% (w/w) C14-17-sec- substance alkane, sodium salts A mixture of: Non-Active 414-420-0 3,9% (w/w) 2-ethylhexyl substance mono-D- glucopyrano- side; 2-ethylhexyl di-D- glucopyranoside 1. META SPC 3 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 3 identifier Identifier Meta SPC: Meta SPC 3 1.2. Suffix to the authorisation number Number 1-3 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 33/59EN OJ L, 11.10.2024 2. META SPC 3 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 3 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 8,8- 8,8% (w/w) substance Methanesulfonic Non-Active 75-75-2 200-898-6 2,56- 2,56% (w/w) acid substance Alkyl ether Non-Active 53563-70-5 4,5- 4,5% (w/w) carboxylic acid substance 2.2. Type(s) of formulation of the meta SPC 3 Formulation type(s) SL Soluble concentrate 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3 Hazard statements H314: Causes severe skin burns and eye damage. H290: May be corrosive to metals. EUH071: Corrosive to the respiratory tract. Precautionary statements P260: Do not breathe vapours. P280: Wear protective gloves, protective clothing, eye protection, face protection. P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a doctor or a physician. P405: Store locked up. P501: Dispose of contents in accordance with national regulations. P501: Dispose of container in accordance with national regulations. P234: Keep only in original packaging. P321: Specific treatment (see instruction on this label). 34/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Use # 1a - Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport) Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses Common name: Enveloped viruses Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,38% w/w. This is a 4% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilution (%): Dilute the product to 4% v/v (4 ml product, add water up to 100 ml). Number and timing of application: Contact time: Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes Category(ies) of users professional ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 35/59EN OJ L, 11.10.2024 Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide) 4.1.1. Use-specific instructions Dilute the product with potable water to 4,0% (4 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.1.2. Use-specific risk mitigation measures See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.2. Use description Table 2 Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data 36/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,38% w/w. This is a 4% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilution (%): Dilute the product to 4% v/v (4 ml product, add water up to 100 ml). Number and timing of application: Contact time: 15 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5: 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - poylamide). 4.2.1. Use-specific instructions Dilute the product with potable water to 4,0% (4 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.2.2. Use-specific risk mitigation measures See general directions for use. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 37/59EN OJ L, 11.10.2024 4.3. Use description Table 3 Use # 2 – Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area) Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area). Application method(s) Method: manual application Detailed description: Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,38% w/w. This is a 4% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2). Dilution (%): Dilute the product to 4% v/v (4 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 38/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 4.3.1. Use-specific instructions Remove gross soiling and pre-clean the surface before applying the product. Dilute the product with potable water to 4,0% (4 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required.Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.3.2. Use-specific risk mitigation measures See general directions for use. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.4. Use description Table 4 Use # 3 - Disinfection of clean hard non-porous surfaces and small objects in a veterinary area Product type PT03: Veterinary hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces and small objects in a veterinary area. Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 39/59EN OJ L, 11.10.2024 Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,57% w/w. This is a 6% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected for 5 minutes and apply approx. 19 sprays /m2 or 25 ml/m2 for 30 minutes). Dilution (%): Dilute the product to 6% v/v (6 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes at room temperature (18-25 °C); 30 minutes at 10 °C Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.4.1. Use-specific instructions Remove gross soiling and pre-clean the surface before applying the product. Dilute the product with potable water to 6,0% (6 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes at room temperature or for 30 minutes at 10°C. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.4.2. Use-specific risk mitigation measures See general directions for use. 4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 40/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 4.5. Use description Table 5 Use # 4 – Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area). For example, ice-cream and shake machines, open plant cleaning in food factories or hard surfaces in kitchens. Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. Application rate(s) and frequency Application rate: The product should be applied in active substance concentration 0,57% w/w. This is a 6% v/v dilution of the product. Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilution (%): Dilute the product to 6% v/v (6 ml product, add water up to 100 ml). Number and timing of application: Contact time: 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 41/59EN OJ L, 11.10.2024 4.5.1. Use-specific instructions Dilute the product with potable water to 6,0% (6 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.5.2. Use-specific risk mitigation measures See general directions for use. 4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 3 5.1. Instructions for use Comply with the instructions for use. Inform the authorisation holder if the treatment is ineffective. 5.2. Risk mitigation measures Wear protective chemical resistant gloves classified under EN 374 or equivalent, face protection consistent with EN 16321 or equivalent and a coverall consistent with EN 14605 or equivalent when handling the concentrate product (during dilution). The full texts of the EN standards are available in Section 6. Personal protective equipment (PPE) material to be specified by the authorisation holder within the product information. This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See section 6 for the full reference to this act. Do not breathe vapour. Avoid contact with eyes and skin. Avoid splashes and spills during mixing and loading (dilution). Wash hands after handling. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a Poison Centre or a doctor. IF ON SKIN: Immediately wash with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance. 42/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 Information to Healthcare personnel/doctor: the eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. IF SWALLOWED: Immediately rinse mouth. Do NOT induce vomiting. Give something to drink, if exposed person is able to swallow. Call 112 or an ambulance for medical assistance. 5.4. Instructions for safe disposal of the product and its packaging Dispose of unused product, its packaging and all other waste in accordance with local regulations. Do not discharge unused product on the ground, into water sources, into pipes nor down the drains. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Store in original container tightly closed. Store protected from light. Do not store above 40 °C. Shelf- life: 2 years. 6. OTHER INFORMATION The full titles of the EN standards referenced in section 5.2 “Risk mitigation measures” are: EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]). Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11). 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ANDY Market area: EU MultiPower Plus Profes- sional ANDYSAN Market area: EU MultiPower Plus Profes- sional CIF Market area: EU MultiPower Plus Profes- sional ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 43/59EN OJ L, 11.10.2024 DOMES- Market area: EU TOS MultiPower Plus Profes- sional FLORAS- Market area: EU ZEPT MultiPower Plus Profes- sional GLORIX Market area: EU MultiPower Plus Profes- sional JIF Market area: EU MultiPower Plus Profes- sional KLINEX Market area: EU MultiPower Plus Profes- sional LIFEBUOY Market area: EU MultiPower Plus Profes- sional LYSO- Market area: EU FORM MultiPower Plus Profes- sional Room Care Market area: EU R9.1 Des- Plus SAVO Market area: EU MultiPower Plus Profes- sional 44/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 SUPER- Market area: EU ANDY MultiPower Plus Profes- sional VISS Market area: EU MultiPower Plus Profes- sional Authorisation number EU-0031644-0007 1-3 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active substance 79-33-4 201-196-2 8,8% (w/w) Methanesulfonic Non-Active 75-75-2 200-898-6 2,56% (w/w) acid substance Alkyl ether Non-Active 53563-70-5 4,5% (w/w) carboxylic acid substance 7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Room Care Market area: EU R9 Des- Plus Authorisation number EU-0031644-0008 1-3 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active substance 79-33-4 201-196-2 8,8% (w/w) Methanesulfonic Non-Active 75-75-2 200-898-6 2,56% (w/w) acid substance Alkyl ether Non-Active 53563-70-5 4,5% (w/w) carboxylic acid substance 1. META SPC 4 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 4 identifier Identifier Meta SPC: Meta SPC 4 1.2. Suffix to the authorisation number Number 1-4 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 45/59EN OJ L, 11.10.2024 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area 2. META SPC 4 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 0,352- 0,352% (w/w) substance 2.2. Type(s) of formulation of the meta SPC 4 Formulation type(s) AL Any other liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4 Hazard statements. Precautionary statements 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Use # 1a - Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport) Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: enveloped viruses Common name: enveloped viruses Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data 46/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. Application rate(s) and frequency Application rate: Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilution (%): ready to use products Number and timing of application: Contact time: Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Spray bottles, HDPE: 0,75 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide) 4.1.1. Use-specific instructions Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in the product to wet the surface. The solution for dipping shall be used only once. Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.1.2. Use-specific risk mitigation measures See general directions for use. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 47/59EN OJ L, 11.10.2024 4.2. Use description Table 2 Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport). Application method(s) Method: manual application Detailed description: 1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. 2. Dipping to wet small objects. Application rate(s) and frequency Application rate: Apply the product by fully wetting the surface (apply approx. 10 sprays /m2 or 13 ml/m2 or fully cover the object to be disinfected). Dilution (%): Ready to use products Number and timing of application: Contact time: 15 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Spray bottles, HDPE: 0,75 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 48/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 4.2.1. Use-specific instructions Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in the product to wet the surface. The solution for dipping shall be used only once. Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.2.2. Use-specific risk mitigation measures See general directions for use. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 4.3. Use description Table 3 Use # 2 – Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area) Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria Development stage: no data Scientific name: Yeast Common name: Yeast Development stage: no data Scientific name: Enveloped viruses only Common name: Enveloped viruses only Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area). Application method(s) Method: manual application Detailed description: Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface. ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 49/59EN OJ L, 11.10.2024 Application rate(s) and frequency Application rate: Apply the product by fully wetting all surface (apply approx. 10 sprays /m2 or 13 ml/m2). Dilution (%): Ready to use product Number and timing of application: Contact time: 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Spray bottles, HDPE: 0,75 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide). 4.3.1. Use-specific instructions Remove gross soiling and pre-clean the surface before applying the product. Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place. 4.3.2. Use-specific risk mitigation measures See general directions for use. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use. 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use. 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use. 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 4 5.1. Instructions for use Comply with the instructions for use. Inform the authorisation holder if the treatment is ineffective. 5.2. Risk mitigation measures Not relevant. 50/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor. IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor. IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor. IF INHALED: If symptoms occur call a POISON CENTRE or a doctor. 5.4. Instructions for safe disposal of the product and its packaging Dispose of unused product, its packaging and all other waste in accordance with local regulations. Do not discharge unused product on the ground, into water sources, into pipes nor down the drains. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Store in original container tightly closed. Store protected from light. Do not store above 40 °C. Shelf- life: 2 years. 6. OTHER INFORMATION 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Room Care Market area: EU R9 RTU Room Care Market area: EU R9.1 Des Authorisation number EU-0031644-0009 1-4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 0,352% (w/w) substance 7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Taski Sani 4 Market area: EU in 1 Plus Spray Authorisation number EU-0031644-0010 1-4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 0,352% (w/w) substance ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 51/59EN OJ L, 11.10.2024 7.3. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ANDY Market area: EU MultiPower Profes- sional ANDYSAN Market area: EU MultiPower Profes- sional CIF Market area: EU MultiPower Profes- sional Cif 4in1 Market area: EU Cleaner Disinfec- tant DOMES- Market area: EU TOS MultiPower Profes- sional Domestos Market area: EU 4in1 Cleaner Disinfec- tant FLORAS- Market area: EU ZEPT MultiPower Profes- sional GLORIX Market area: EU MultiPower Profes- sional Glorix 4in1 Market area: EU Cleaner Disinfec- tant JIF Market area: EU MultiPower Profes- sional 52/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 KLINEX Market area: EU MultiPower Profes- sional Klinex 4in1 Market area: EU Cleaner Disinfec- tant LIFEBUOY Market area: EU MultiPower Profes- sional LYSO- Market area: EU FORM MultiPower Profes- sional Lysoform Market area: EU 4in1 Cleaner Disinfec- tant Metro Prof. Market area: EU 4 in 1 Plus RTU OPTIMAX Market area: EU 4 in 1 Plus RTU SAVO Market area: EU MultiPower Profes- sional Suma San Market area: EU 4in1 D10.7 Spray SUPER- Market area: EU ANDY MultiPower Profes- sional Taski Sani 4 Market area: EU in 1 Plus RTU VISS Market area: EU MultiPower Profes- sional ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 53/59EN OJ L, 11.10.2024 Viss 4in1 Market area: EU Cleaner Disinfec- tant We Clean 4 Market area: EU in 1 Plus RTU Authorisation number EU-0031644-0011 1-4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active substance 79-33-4 201-196-2 0,352% (w/w) 7.4. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ANDY Market area: EU MultiPower FREE Profes- sional ANDY Market area: EU MultiPower ZERO Profes- sional ANDYSAN Market area: EU MultiPower FREE Profes- sional ANDYSAN Market area: EU MultiPower ZERO Profes- sional CIF Market area: EU MultiPower FREE Profes- sional CIF Market area: EU MultiPower ZERO Profes- sional 54/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 Divosan Market area: EU Freed RTU DOMES- Market area: EU TOS MultiPower FREE Profes- sional DOMES- Market area: EU TOS MultiPower ZERO Profes- sional FLORAS- Market area: EU ZEPT MultiPower FREE Profes- sional FLORAS- Market area: EU ZEPT MultiPower ZERO Profes- sional GLORIX Market area: EU MultiPower FREE Profes- sional GLORIX Market area: EU MultiPower ZERO Profes- sional JIF Market area: EU MultiPower FREE Profes- sional JIF Market area: EU MultiPower ZERO Profes- sional KLINEX Market area: EU MultiPower FREE Profes- sional ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 55/59EN OJ L, 11.10.2024 KLINEX Market area: EU MultiPower ZERO Profes- sional LIFEBUOY Market area: EU MultiPower FREE Profes- sional LIFEBUOY Market area: EU MultiPower ZERO Profes- sional LYSO- Market area: EU FORM MultiPower FREE Profes- sional LYSO- Market area: EU FORM MultiPower ZERO Profes- sional SAVO Market area: EU MultiPower FREE Profes- sional SAVO Market area: EU MultiPower ZERO Profes- sional SUPER- Market area: EU ANDY MultiPower FREE Profes- sional SUPER- Market area: EU ANDY MultiPower ZERO Profes- sional Sure Market area: EU Sanitizer A-RTU Sure Market area: EU Sanitizer Spray TASKI Sani Market area: EU 4 in 1 FREE 56/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 TASKI Sani Market area: EU 4 in 1 ZERO VISS Market area: EU MultiPower FREE Profes- sional VISS Market area: EU MultiPower ZERO Profes- sional Authorisation number EU-0031644-0012 1-4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active substance 79-33-4 201-196-2 0,352% (w/w) 7.5. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Sure Market area: EU Sanitizer B-RTU Authorisation number EU-0031644-0013 1-4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 0,352% (w/w) substance ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 57/59EN OJ L, 11.10.2024 7.6. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Sure Market area: EU Sanitizer C-RTU Sure Market area: EU Sanitizer 4in1 Spray Sure Market area: EU Sanitizer 4in1 Fresh Spray Authorisation number EU-0031644-0014 1-4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 0,352% (w/w) substance 7.7. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Sure Market area: EU Freshener RTU Sure Market area: EU Freshener 7X RTU Sure Market area: EU Sanitiser RTU Sure Market area: EU Sanitiser 2X RTU TASKI Sani Market area: EU 4 in 1 Freshener Taski Sani Market area: EU 4 in 1 Freshener Zenith Market area: EU Freshener RTU 58/59 ELI: http://data.europa.eu/eli/reg_impl/2024/2651/ojEN OJ L, 11.10.2024 Zenith Market area: EU Freshener 7X RTU Zenith Market area: EU Sanitiser RTU Zenith Market area: EU Sanitiser 2X RTU Authorisation number EU-0031644-0015 1-4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid active 79-33-4 201-196-2 0,352% (w/w) substance ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj 59/59