Home Europe European Commission Commission Implementing Regulation (EU) 2025/1878 of 16 Sept...
Date: 2025-09-17 Category: Not Applicable State: Union Government Country: Europe

Commission Implementing Regulation (EU) 2025/1878 of 16 September 2025 granting a Union authorisation for the biocidal product family BPF Propanol in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council

Issued by European Commission · Directorate-General for Health and Food Safety

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

Executive Summary: Commission Implementing Regulation (EU) 2025/1878 grants Union authorisation to Bode Chemie GmbH for the biocidal product family BPF Propanol, encompassing product types 1, 2, and 4. The authorisation is valid from October 7, 2025, to September 30, 2035, and is subject to compliance with the summary of biocidal product characteristics (SPC) outlined in the Annex. The regulation is binding in its entirety and directly applicable in all Member States. Key Points / Main Content: * **Union Authorisation:** * Authorisation number: EU00346020000 is granted to Bode Chemie GmbH. * Product family: BPF Propanol. * Product types: Human hygiene (PT01), Disinfectants and algaecides not intended for direct application to humans or animals (PT02), and Food and feed area (PT04). * **Authorisation Details:** * Valid from: October 7, 2025. * Expiry date: September 30, 2035. * Authorisation holder: BODE Chemie GmbH, Hamburg, Germany. * Manufacturers of active substances: BASF SE (Propan-1-ol) and INEOS Solvents Germany GmbH (Propan-2-ol). * **Product Family Composition:** * Active substances: Propan-1-ol (30-45% w/w) and Propan-2-ol (25-45% w/w). * Non-active substance: 1-Tetradecanol (0-1% w/w). * Formulation types: Any other liquid (AL) and Impregnated wipes (XX). * **Meta SPCs (Specific Product Characteristics):** * Meta SPC 1 (Identifier: meta SPC 1, Suffix number to the authorisation number: 11) : PT01. Trade names Sterillium Market area: EU pure. * Meta SPC 2 (Identifier: meta SPC 2, Suffix number to the authorisation number: 12) : PT01. Trade names Sterillium Market area: EU classic blue. * Meta SPC 3 (Identifier: meta SPC 3, Suffix number to the authorisation number: 13): PT01. Trade names Sterillium Market area: EU Gel PRO. * Meta SPC 4 (Identifier: meta SPC 4, Suffix number to the authorisation number: 14): PT02 and PT04. Trade names Bacillol Market area: EU pure. * Meta SPC 5 (Identifier: meta SPC 5, Suffix number to the authorisation number: 15): PT02 and PT04. Trade names Bacillol Market area: EU pure Tissues. * Meta SPC 6 (Identifier: meta SPC 6, Suffix number to the authorisation number: 16): PT02 and PT04. * **Hazard and Precautionary Statements:** * Includes statements for flammability, eye irritation, drowsiness, environmental hazards, and skin dryness. * Precautionary measures cover handling, storage, first aid, and disposal. * **Authorised Uses (Examples):** * Hygienic handrub for professional, industrial, and general public use (PT01). * Application rate: 3 ml. * Contact times: 30-60 seconds. * Surgical hand disinfection for professional use (PT01). * Application rate: 2 times 3 ml. * Contact time: 90 seconds. * Small surface disinfection for professional, industrial, and general public use (PT02, PT04). * Application rate: 18-50 ml/m². * Contact times: 1-5 minutes. * **General Directions for Use:** * Refer to use-specific instructions. * Risk mitigation measures include keeping out of reach of children, ensuring ventilation, and proper disposal. * Shelf life: 36 months, store below 40°C and protect from direct light. Impact Analysis * **Bode Chemie GmbH:** * Impact: Granted Union authorisation for BPF Propanol, allowing them to market and sell the product family within the EU. * Action Required: Ensure compliance with the SPC outlined in the Annex, including proper labeling, risk mitigation measures, and adherence to authorised uses. * **Manufacturers of Active Substances (BASF SE, INEOS Solvents Germany GmbH):** * Impact: Continued supply of Propan-1-ol and Propan-2-ol for the BPF Propanol product family. * Action Required: Maintain consistent quality and supply of active substances. * **Professional and Industrial Users:** * Impact: Access to authorised biocidal products for human hygiene, surface disinfection, and food/feed area disinfection. * Action Required: Follow use-specific instructions and risk mitigation measures, including wearing eye protection during refilling and ensuring adequate ventilation. * **General Public:** * Impact: Access to authorised biocidal products for human hygiene and surface disinfection in domestic settings. * Action Required: Comply with instructions for use, adhere to specified application rates, and take precautions to avoid contact with eyes and skin. * **Member States:** * Impact: The regulation is binding and directly applicable, requiring enforcement of the authorisation conditions. * Action Required: Ensure compliance with the regulation within their jurisdiction.

Key Entities Referenced

European Union: A political and economic union of member states located primarily in Europe. The regulation grants a Union authorisation. European Commission: The executive branch of the European Union, responsible for proposing legislation, implementing decisions, and managing the EU's day-to-day operations. The regulation is an implementing regulation from the Commission. Regulation EU No 528/2012: A regulation of the European Parliament and of the Council concerning the making available on the market and use of biocidal products. This regulation is the legal basis for the authorization of the biocidal product family. European Chemicals Agency: An agency of the European Union that implements EU chemicals legislation. Bode Chemie GmbH submitted an application to the European Chemicals Agency. Bode Chemie GmbH: The applicant company for the Union authorisation of the biocidal product family BPF Propanol. BPF Propanol: The name of the biocidal product family that is the subject of the Union authorisation. Germany: The member state whose competent authority agreed to evaluate the application for Union authorisation of BPF Propanol. Ursula VON DER LEYEN: The President of the European Commission at the time the regulation was adopted.
Official Source Record View Original Source →
See Full Document Text
Official Journal EN of the European Union L series 2025/1878 17.9.2025 COMMISSION IMPLEMENTING REGULATION(EU) 2025/1878 of 16 September 2025 granting a Union authorisation for the biocidal product family ‘BPF Propanol’ in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products(1), and in particular Article 44(5), first subparagraph, thereof, Whereas: (1) On 29 March 2019, Bode Chemie GmbH submitted an application to the European Chemicals Agency (‘the Agency’) in accordance with Article 43(1) of Regulation (EU) No 528/2012 for Union authorisation of a biocidal product family named ‘BPF Propanol’ of product-types 1, 2 and 4 as described in Annex V to that Regulation, providing written confirmation that the competent authority of Germany had agreed to evaluate the application. The application was recorded under case number BC-NE050445-47 in the Register for Biocidal Products. (2) ‘BPF Propanol’ contains propan-1-ol and propan-2-ol as the active substances, included in the Union list of approved active substances referred to in Article 9(2) of Regulation (EU) No 528/2012 for product-types 1, 2 and 4. (3) On 14 August 2024, the evaluating competent authority submitted, in accordance with Article 44(1) of Regulation (EU) No 528/2012, an assessment report and the conclusions of its evaluation to the Agency. (4) On 21 March 2025, the Agency submitted to the Commission its opinion(2), the draft summary of the biocidal product characteristics (‘SPC’) of ‘BPF Propanol’ and the final assessment report on the biocidal product family, in accordance with Article 44(3) of Regulation (EU) No 528/2012. (5) The opinion concludes that ‘BPF Propanol’ is a biocidal product family within the meaning of Article 3(1), point (s), of Regulation (EU) No 528/2012, that it is eligible for Union authorisation in accordance with Article 42(1) of that Regulation and that, subject to compliance with the draft SPC, it meets the conditions laid down in Article 19(6) of that Regulation. (6) On 8 April 2025, the Agency transmitted to the Commission the draft SPC in all the official languages of the Union in accordance with Article 44(4) of Regulation (EU) No 528/2012. (7) The Commission concurs with the opinion of the Agency and considers it therefore appropriate to grant a Union authorisation for the biocidal product family ‘BPF Propanol’. (8) The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Biocidal Products, (1) OJ L 167, 27.6.2012, p. 1, ELI: http://data.europa.eu/eli/reg/2012/528/oj. (2) ECHA opinion of 27 February 2025 on the Union authorisation of ‘BPF Propanol’ (ECHA/BPC/462/2025), https://echa.europa.eu/ opinions-on-union-authorisation. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 1/76EN OJ L, 17.9.2025 HAS ADOPTED THIS REGULATION: Article 1 A Union authorisation with authorisation number EU-0034602-0000 is hereby granted to Bode Chemie GmbH for the making available on the market and use of the biocidal product family ‘BPF Propanol’ in accordance with the summary of the biocidal product characteristics set out in the Annex. The Union authorisation is valid from 7 October 2025 until 30 September 2035. Article 2 This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 16 September 2025. For the Commission The President Ursula VON DER LEYEN 2/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 ANNEX Summary of product characteristics for a biocidal product family BPF Propanol Product type(s) PT01: Human hygiene PT04: Food and feed area PT02: Disinfectants and algaecides not intended for direct application to humans or animals Authorisation number EU-0034602-0000 R4BP asset number EU-0034602-0000 PART I FIRST INFORMATION LEVEL 1. ADMINISTRATIVE INFORMATION 1.1. Family name Name BPF Propanol 1.2. Product type(s) Product type(s) PT01: Human hygiene PT04: Food and feed area PT02: Disinfectants and algaecides not intended for direct application to humans or animals 1.3. Authorisation holder Name BODE Chemie GmbH Name and address of the authorisation holder Address Melanchthonstr. 27 22525 Hamburg DE Authorisation number EU-0034602-0000 R4BP asset number EU-0034602-0000 Date of the authorisation 7 October 2025 Expiry date of the authorisation 30 September 2035 1.4. Manufacturer(s) of the product Name of manufacturer Bode Chemie GmbH Address of manufacturer Melanchthonstrasse 27 22525 Hamburg Germany Location of manufacturing sites BODE Chemie GmbH site 1 Melanchthonstraße 27 22525 Hamburg Germany ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 3/76EN OJ L, 17.9.2025 1.5. Manufacturer(s) of the active substance(s) Active substance Propan-1-ol Name of manufacturer BASF SE Address of manufacturer Carl-Bosch-Str. 38 67056 Ludwigshafen Germany Location of manufacturing sites BASF SE site 1 Carl-Bosch-Str. 38 67056 Ludwigshafen Germany Active substance Propan-2-ol Name of manufacturer INEOS Solvents Germany GmbH Address of manufacturer Römerstr. 733 47443 Moers Germany Location of manufacturing sites INEOS Solvents Germany GmbH site 1 Römerstr. 733 47443 Moers Germany 2. PRODUCT FAMILY COMPOSITION AND FORMULATION 2.1. Qualitative and quantitative information on the composition of the family Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 30 - 45 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 25 - 45 % (w/w) substance 1-Tetradecanol - Non-active 112-72-1 204-000-3 0 - 1 % (w/w) substance 2.2. Type(s) of formulation Formulation type(s) AL Any other liquid XX Impregnated wipes PART II SECOND INFORMATION LEVEL META SPC(S) 1. META SPC 1 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 1 identifier Identifier Meta SPC: meta SPC 1 1.2. Suffix to the authorisation number Number 1-1 4/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 1.3. Product type(s) Product type(s) PT01: Human hygiene 2. META SPC 1 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 1 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 30 - 30 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 45 - 45 % (w/w) substance 1-Tetradecanol - Non-active 112-72-1 204-000-3 0,25 - 1 % (w/w) substance 2.2. Type(s) of formulation of the meta SPC 1 Formulation type(s) AL Any other liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1 Hazard statements H226: Flammable liquid and vapour. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness. H412: Harmful to aquatic life with long lasting effects. EUH066: Repeated exposure may cause skin dryness or cracking. Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read carefully and follow all instructions. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P240: Ground and bond container and receiving equipment. P241: Use explosion-proof electrical equipment. P241: Use explosion-proof lighting equipment. P242: Use non-sparking tools. P243: Take actions to prevent static discharges. P261: Avoid breathing vapours. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 5/76EN OJ L, 17.9.2025 P271: Use only outdoors or in a well-ventilated area. P273: Avoid release to the environment. P280: Wear eye protection. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312: Call a doctor if you feel unwell. P312: Call a POISON CENTER if you feel unwell. P337+P313: If eye irritation persists: Get medical advice. P370+P378: In case of fire: Use water mist, foam, carbon dioxide or powder extinguishing agent to extinguish. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P403+P235: Store in a well-ventilated place. Keep cool. P405: Store locked up. P501: Dispose of contents in accordance with local/ regional/national/international regulations. P501: Dispose of container in accordance with local/ regional/national/international regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Hygienic handrub, PT1, professional and industrial user - meta SPC 1 Product type PT01: Human hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hygienic handrub for use in industrial, institutional, health care and domestic areas. Application method(s) Method: Hygienic handrub Detailed description: 6/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 Application rate(s) and frequency Application Rate: 3 ml per application Number and timing of application: Product is used as required which may be multiple times per day (frequency: 25 per day) Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 30 seconds Limited spectrum virucidal activity – 60 seconds Category(ies) of users industrial professional Pack sizes and packaging material HDPE bottle 50 - 1000 ml HDPE container 5 l 4.1.1. Use-specific instructions for use Rub 3 ml into the dry and visibly clean hands and keep moist for the required contact time. 4.1.2. Use-specific risk mitigation measures The following risk mitigation measures without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work shall be applied: The use of eye protection during refilling of the application bottles is mandatory. Eye protection according to the European Standard EN ISO 16321 or equivalent. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.2. Use description Table 2 Hygienic handrub, PT1, general public - meta SPC 1 Product type PT01: Human hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 7/76EN OJ L, 17.9.2025 Field(s) of use indoor use The product is a ready-to-use hygienic handrub for use in institutional, health care and domestic areas. Application method(s) Method: Hygienic handrub Detailed description: Application rate(s) and frequency Application Rate: 3 ml (the amount of liquid should resemble the size of a large-sized coin) Number and timing of application: Product is used as required, for adults and children older than 2 years up to 10 times per day, for toddlers up to 8 times per day. Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 30 seconds Limited spectrum virucidal activity – 60 seconds Category(ies) of users general public (non-professional) Pack sizes and packaging material HDPE bottle 50 - 1000 ml 4.2.1. Use-specific instructions for use Comply with the instructions for use. Rub 3 ml into the dry and visibly clean hands and keep moist for the required contact time. 4.2.2. Use-specific risk mitigation measures Do not use more than the specified number of applications per day The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Use for children only under supervision of an adult. Apply the amount for the child/toddler on your own hand first and rub the product on child’s/toddler’s hand. Make sure that the child/toddler does not touch eyes or mouth before the product has dried. Avoid contact with eyes. Avoid unnecessary contact to skin. In case of skin dryness, use appropriate skin care lotion. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 8/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 4.3. Use description Table 3 Surgical hand disinfection / residential bacterial skin flora, PT1, professional user - meta SPC 1 Product type PT01: Human hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Field(s) of use indoor use Surgical hand disinfection / resident bacterial skin flora. The product is a ready-to-use alcoholic disinfectant for use in health care areas / hospital sector. Application method(s) Method: Surgical handrub Detailed description: Application rate(s) and frequency Application Rate: 2 times 3 ml per application Number and timing of application: Product is used as required which may be multiple times per day (frequency: 4 times per day). Contact time: 90 seconds Category(ies) of users professional Pack sizes and packaging material HDPE bottle 50 - 1000 ml HDPE container 5 l 4.3.1. Use-specific instructions for use Rub 2 times 3 ml into dry and visibly clean hands and forearms for 1,5 minutes, keeping the skin moist during the application time. Any decanting or refilling may only be carried out under aseptic conditions. 4.3.2. Use-specific risk mitigation measures The following risk mitigation measures without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work shall be applied: The use of eye protection during refilling of the application bottles is mandatory. Eye protection according to the European Standard EN ISO16321-1 or equivalent. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 9/76EN OJ L, 17.9.2025 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 1 5.1. Instructions for use see use-specific instructions 5.2. Risk mitigation measures Keep out of reach of children and pets or non-target animals. Ensure adequate ventilation during the application. Make sure that the applied product is completely dried before entering a room or area where people will stay for a longer period of time. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor. Information to Healthcare personnel or doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE. IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or a doctor. IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTER or a doctor. IF ON SKIN: If irritation occurs wash with water and seek medical advice. In cases of unintentional skin exposure: wash with water. 5.4. Instructions for safe disposal of the product and its packaging Avoid release to the environment. Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 36 months. Store at temperatures not exceeding 40 °C. Protect from direct light. 6. OTHER INFORMATION Please be aware of the European reference values of 129,28 mg/m3for the active substance Propan-2-ol (CAS No.: 67-63-0) which was used for the risk assessment for the biocidal product. The full title of the EN standard referenced in the Risk mitigation measures are: the European Standard EN ISO 16321 - Eye and face protection for occupational use. With respect to the “Category (ies) of users” note: “Professionals (including industrial users)” means trained professionals if this is required by national legislation. 10/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Sterillium Market area: EU pure Authorisation number EU-0034602-0001 1-1 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 30 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 45 % (w/w) substance 1-Tetradecanol - Non-active 112-72-1 204-000-3 0,95 % (w/w) substance 7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Sterillium Market area: EU classic blue Authorisation number EU-0034602-0002 1-1 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 30 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 45 % (w/w) substance 1-Tetradecanol - Non-active 112-72-1 204-000-3 0,95 % (w/w) substance 1. META SPC 2 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 2 identifier Identifier Meta SPC: meta SPC 2 1.2. Suffix to the authorisation number Number 1-2 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 11/76EN OJ L, 17.9.2025 1.3. Product type(s) Product type(s) PT01: Human hygiene 2. META SPC 2 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 2 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 30 - 30 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 45 - 45 % (w/w) substance 2.2. Type(s) of formulation of the meta SPC 2 Formulation type(s) AL Any other liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2 Hazard statements H226: Flammable liquid and vapour. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness. EUH066: Repeated exposure may cause skin dryness or cracking. Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read carefully and follow all instructions. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P240: Ground and bond container and receiving equipment. P241: Use explosion-proof electrical equipment. P241: Use explosion-proof lighting equipment. P242: Use non-sparking tools. P243: Take actions to prevent static discharges. P261: Avoid breathing vapours. P271: Use only outdoors or in a well-ventilated area. P280: Wear eye protection. 12/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312: Call a doctor if you feel unwell. P312: Call a POISON CENTER if you feel unwell. P337+P313: If eye irritation persists: Get medical advice. P370+P378: In case of fire: Use water mist, foam, carbon dioxide or powder extinguishing agent to extinguish. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P403+P235: Store in a well-ventilated place. Keep cool. P405: Store locked up. P501: Dispose of contents in accordance with local/ regional/national/international regulations. P501: Dispose of container in accordance with local/ regional/national/international regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Hygienic handrub, PT1, professional and industrial user - meta SPC 2 Product type PT01: Human hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hygienic handrub for use in industrial, institutional, health care and domestic areas. Application method(s) Method: Hygienic handrub Detailed description: ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 13/76EN OJ L, 17.9.2025 Application rate(s) and frequency Application Rate: 3 ml per application Number and timing of application: Product is used as required which may be multiple times per day (frequency: 25 per day). Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 30 seconds Limited spectrum virucidal activity – 60 seconds Category(ies) of users industrial professional Pack sizes and packaging material HDPE bottle 50 - 1000 ml HDPE container 5 l 4.1.1. Use-specific instructions for use Rub 3 ml into the dry and visibly clean hands and keep moist for the required contact time. 4.1.2. Use-specific risk mitigation measures The following risk mitigation measures without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work shall be applied: The use of eye protection during refilling of the application bottles is mandatory. Eye protection according to the European Standard EN ISO 16321 or equivalent. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.2. Use description Table 2 Hygienic handrub, PT1, general public - meta SPC 2 Product type PT01: Human hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses 14/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 Field(s) of use indoor use The product is a ready-to-use hygienic handrub for use in institutional, health care and domestic areas. Application method(s) Method: Hygienic handrub Detailed description: Application rate(s) and frequency Application Rate: 3 ml (the amount of liquid should resemble the size of a large-sized coin) Number and timing of application: Product is used as required, for adults and children older than 2 years up to 10 times per day, for toddlers up to 8 times per day. Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 30 seconds Limited spectrum virucidal activity – 60 seconds Category(ies) of users general public (non-professional) Pack sizes and packaging material HDPE bottle 50 - 1000 ml 4.2.1. Use-specific instructions for use Comply with the instructions for use. Rub 3 ml into the dry and visibly clean hands and keep moist for the required contact time. 4.2.2. Use-specific risk mitigation measures Do not use more than the specified number of applications per day. The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Use for children only under supervision of an adult. Apply the amount for the child/toddler on your own hand first and rub the product on child’s/toddler’s hand. Make sure that the child/toddler does not touch eyes or mouth before the product has dried. Avoid contact with eyes. Avoid unnecessary contact to skin. In case of skin dryness, use appropriate skin care lotion. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 15/76EN OJ L, 17.9.2025 4.3. Use description Table 3 Surgical hand disinfection / residential bacterial skin flora, PT1, professional user Product type PT01: Human hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Field(s) of use indoor use Surgical hand disinfection / resident bacterial skin flora. The product is a ready-to-use alcoholic disinfectant for use in health care areas / hospital sector. Application method(s) Method: surgical handrub Detailed description: Application rate(s) and frequency Application Rate: 2 times 3 ml per application Number and timing of application: Product is used as required which may be multiple times per a day (frequency: 4 per day). Contact time: 90 seconds Category(ies) of users professional Pack sizes and packaging material HDPE bottle 50 - 1000 ml HDPE container 5 l 4.3.1. Use-specific instructions for use Rub 2 times 3 ml into dry and visibly clean hands and forearms for 1.5 minutes, keeping the skin moist during the application time. Any decanting or refilling may only be carried out under aseptic conditions. 4.3.2. Use-specific risk mitigation measures The following risk mitigation measures without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work shall be applied: The use of eye protection during refilling of the application bottles is mandatory. Eye protection according to the European Standard EN ISO 16321 or equivalent. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 16/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 2 5.1. Instructions for use see use-specific instructions for use 5.2. Risk mitigation measures Keep out of reach of children and pets or non-target animals. Ensure adequate ventilation during the application. Make sure that the applied product is completely dried before entering a room or area where people will stay for a longer period of time. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor. Information to Healthcare personnel or doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE. IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or a doctor. IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor. IF ON SKIN: If irritation occurs wash with water and seek medical advice. In cases of unintentional skin exposure: wash with water. 5.4. Instructions for safe disposal of the product and its packaging Avoid release to the environment. Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 36 months Store at temperatures not exceeding 40 °C. Protect from direct light. 6. OTHER INFORMATION Please be aware of the European reference values of 129,28 mg/m3for the active substance Propan-2-ol (CAS No.: 67-63-0) which was used for the risk assessment for the biocidal product. The full title of the EN standard referenced in the Risk mitigation measures are: the European Standard EN ISO 16321 - Eye and face protection for occupational use. With respect to the “Category (ies) of users” note: “Professionals (including industrial users)” means trained professionals if this is required by national legislation. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 17/76EN OJ L, 17.9.2025 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Sterillium Market area: EU pure IPM Authorisation number EU-0034602-0003 1-2 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 30 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 45 % (w/w) substance 1. META SPC 3 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 3 identifier Identifier Meta SPC: meta SPC 3 1.2. Suffix to the authorisation number Number 1-3 1.3. Product type(s) Product type(s) PT01: Human hygiene 2. META SPC 3 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 3 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 30 - 30 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 45 - 45 % (w/w) substance 2.2. Type(s) of formulation of the meta SPC 3 Formulation type(s) AL Any other liquid 18/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3 Hazard statements H226: Flammable liquid and vapour. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness. EUH066: Repeated exposure may cause skin dryness or cracking. Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read carefully and follow all instructions. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P240: Ground and bond container and receiving equipment. P241: Use explosion-proof electrical equipment. P241: Use explosion-proof lighting equipment. P242: Use non-sparking tools. P243: Take actions to prevent static discharges. P261: Avoid breathing vapours. P271: Use only outdoors or in a well-ventilated area. P280: Wear eye protection. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312: Call a POISON CENTER if you feel unwell. P312: Call a doctor if you feel unwell. P337+P313: If eye irritation persists: Get medical advice. P370+P378: In case of fire: Use water mist, foam, carbon dioxide or powder extinguishing agent to extinguish. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P403+P235: Store in a well-ventilated place. Keep cool. P405: Store locked up. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 19/76EN OJ L, 17.9.2025 P501: Dispose of container in accordance with local/ regional/national/international regulations. P501: Dispose of contents in accordance with local/ regional/national/international regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Hygienic handrub, PT1, professional and industrial user Product type PT01: Human hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Mycobacteria Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hygienic handrub for use in industrial, institutional, health care and domestic areas. Application method(s) Method: Hygienic handrub Detailed description: Application rate(s) and frequency Application Rate: 3 ml per application Number and timing of application: Product is used as required which may be multiple times per day (frequency: 25 per day). Contact time: 30 seconds Category(ies) of users industrial professional Pack sizes and packaging material HDPE bottle 50 - 1000 ml HDPE bottle 35 - 100 ml HDPE container 5 l 4.1.1. Use-specific instructions for use Rub 3 ml into the dry and visibly clean hands and keep moist for the required contact time. 4.1.2. Use-specific risk mitigation measures The following risk mitigation measures without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work shall be applied: The use of eye protection during refilling of the application bottles is mandatory. Eye protection according to the European Standard EN ISO 16321 or equivalent. 20/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.2. Use description Table 2 Hygienic handrub, PT1, general public Product type PT01: Human hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Mycobacteria Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hygienic handrub for use in institutional, health care and domestic areas. Application method(s) Method: Hygienic handrub Detailed description: Application rate(s) and frequency Application Rate: 3 ml (the amount of liquid should resemble the size of a large-sized coin) Number and timing of application: Product is used as required, for adults and children older than 2 years up to 10 times per day, for toddlers up to 8 times per day. Contact time: 30 seconds Category(ies) of users general public (non-professional) Pack sizes and packaging material HDPE bottle 50 - 1000 ml HDPE bottle 35 - 100 ml 4.2.1. Use-specific instructions for use Comply with the instructions for use. Rub 3 ml into the dry and visibly clean hands and keep moist for the required contact time. 4.2.2. Use-specific risk mitigation measures Do not use more than the specified number of applications per day. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 21/76EN OJ L, 17.9.2025 The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Use for children only under supervision of an adult. Apply the amount for the child/toddler on your own hand first and rub the product on child’s/toddler’s hand. Make sure that the child/toddler does not touch eyes or mouth before the product has dried. Avoid contact with eyes. Avoid unnecessary contact to skin. In case of skin dryness, use appropriate skin care lotion. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.3. Use description Table 3 Surgical hand disinfection / residential bacterial skin flora, PT1, professional user Product type PT01: Human hygiene Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Mycobacteria Common name: Enveloped viruses Field(s) of use indoor use Surgical hand disinfection / resident bacterial skin flora. The product is a ready-to-use alcoholic disinfectant for use in health care areas / hospital sector. Application method(s) Method: surgical handrub Detailed description: Application rate(s) and frequency Application Rate: At least 3 ml per application Number and timing of application: Product is used as required which may be multiple times per day (frequency: 4 per day). Contact time: 90 seconds Category(ies) of users professional Pack sizes and packaging material HDPE bottle 35 - 100 ml HDPE bottle 50 - 1000 ml HDPE container 5 l 22/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 4.3.1. Use-specific instructions for use Rub at least 3 ml into dry and visibly clean hands and forearms for 1,5 minutes, keeping the skin moist during the application time. Any decanting or refilling may only be carried out under aseptic conditions. 4.3.2. Use-specific risk mitigation measures The following risk mitigation measures without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work shall be applied: The use of eye protection during refilling of the application bottles is mandatory. Eye protection according to the European Standard EN ISO 16321 or equivalent. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 3 5.1. Instructions for use see use-specific instructions for use 5.2. Risk mitigation measures Keep out of reach of children and pets or non-target animals. Ensure adequate ventilation during the application. Make sure that product is applied and completely dried before entering the room or area where people will stay for a longer period. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor. Information to Healthcare personnel or doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE. IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or a doctor. IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor. IF ON SKIN: If irritation occurs wash with water and seek medical advice. In cases of unintentional skin exposure: wash with water. 5.4. Instructions for safe disposal of the product and its packaging Avoid release to the environment. Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 23/76EN OJ L, 17.9.2025 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 36 months. Store at temperatures not exceeding 40 °C. 6. OTHER INFORMATION Please be aware of the European reference values of 129,28 mg/m3for the active substance Propan-2-ol (CAS No.: 67-63-0) which was used for the risk assessment for the biocidal product. The full title of the EN standard referenced in the Risk mitigation measures are: the European Standard EN ISO 16321 - Eye and face protection for occupational use. With respect to the “Category (ies) of users” note: “Professionals (including industrial users)” means trained professionals if this is required by national legislation. 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Sterillium Market area: EU Gel PRO Authorisation number EU-0034602-0004 1-3 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 30 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 45 % (w/w) substance 1. META SPC 4 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 4 identifier Identifier Meta SPC: meta SPC 4 1.2. Suffix to the authorisation number Number 1-4 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area 24/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 2. META SPC 4 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 4 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 30 - 30 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 45 - 45 % (w/w) substance 2.2. Type(s) of formulation of the meta SPC 4 Formulation type(s) AL Any other liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4 Hazard statements H226: Flammable liquid and vapour. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness. EUH066: Repeated exposure may cause skin dryness or cracking. Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read carefully and follow all instructions. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P240: Ground and bond container and receiving equipment. P241: Use explosion-proof electrical equipment. P241: Use explosion-proof lighting equipment. P242: Use non-sparking tools. P243: Take actions to prevent static discharges. P261: Avoid breathing vapours. P264: Wash hands thoroughly after handling. P271: Use only outdoors or in a well-ventilated area. P280: Wear eye protection. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 25/76EN OJ L, 17.9.2025 P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312: Call a doctor if you feel unwell. P312: Call a POISON CENTER if you feel unwell. P337+P313: If eye irritation persists: Get medical advice. P370+P378: In case of fire: Use water mist, foam, carbon dioxide or powder extinguishing agent to extinguish. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P403+P235: Store in a well-ventilated place. Keep cool. P405: Store locked up. P501: Dispose of container in accordance with local/ regional/national/international regulations. P501: Dispose of contents in accordance with local/ regional/national/international regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Small surface disinfection, PT2, professional and industrial user - meta SPC 4 Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant for use in industrial, institutional (e.g. hotels), health care (e.g. hospitals, medical practices) and domestic area. Application method(s) Method: Spraying or pouring followed by wiping Detailed description: 26/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 Application rate(s) and frequency Application Rate: Institutional, health care and domestic area: 18 ml/m2; Industrial area: 18 - 50 ml/m2. Number and timing of application: Product is used as required which may be multiple times per day (frequency: 8 per day). Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and limited spectrum virucidal activity – 5 minutes Category(ies) of users industrial professional Pack sizes and packaging material HDPE bottle 50 - 1000 ml HDPE container 5 l 4.1.1. Use-specific instructions for use For institutional, health care and domestic area: Pouring: Invert the bottle and pour (8 sec/m2) on the surface. Spraying (500 – 1000ml bottle): 15 pump strokes per m2. Spraying (50ml bottle): 12 pump strokes per 0,1m2. For industrial area: Pouring: Invert the bottle and pour (8 - 22 sec/m2) on the surface. Spraying (500 – 1000ml bottle): 15 - 41 pump strokes per m2. Spraying (50ml bottle): at least 12 pump strokes per 0,1m2. 4.1.2. Use-specific risk mitigation measures The following risk mitigation measures without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work shall be applied: The use of eye protection during refilling of the application bottles of the product is mandatory. Eye protection according to the European Standard EN ISO 16321 or equivalent. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 27/76EN OJ L, 17.9.2025 4.2. Use description Table 2 Small surface disinfection, PT2, general public - meta SPC 4 Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant for use in institutional (e.g. hotels), health care (e.g. hospitals, medical practices) and domestic area. Application method(s) Method: Spraying or pouring followed by wiping Detailed description: Application rate(s) and frequency Application Rate: 18 ml/m2. Number and timing of application: maximum 5 applications per day. Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and limited spectrum virucidal activity – 5 minutes Category(ies) of users general public (non-professional) Pack sizes and packaging material HDPE bottle 50 - 1000 ml 4.2.1. Use-specific instructions for use Comply with the instructions for use. Pouring: Invert the bottle and pour (8 sec/m2) on the surface. Spraying (500 – 1000ml bottle): 15 pump strokes per m2. Spraying (50ml bottle): 12 pump strokes per 0,1m2. 4.2.2. Use-specific risk mitigation measures The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Avoid contact with eyes. Avoid unnecessary contact to skin. In case of skin dryness, use appropriate skin care lotion. 28/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.3. Use description Table 3 Small surface disinfection, PT4, professional and industrial user - meta SPC 4 Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant for use in industrial, institutional, health care and domestic area. Application method(s) Method: Spraying or pouring followed by wiping Detailed description: Application rate(s) and frequency Application Rate: Institutional, health care and domestic area: 18ml/m2; Industrial area: 18 - 50 ml/m2. Number and timing of application: Product is used as required which may be multiple times per day (frequency: 8 per day). Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and viruses – 5 minutes Category(ies) of users industrial professional Pack sizes and packaging material HDPE bottle 50 - 1000 ml HDPE container 5 l ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 29/76EN OJ L, 17.9.2025 4.3.1. Use-specific instructions for use For institutional, health care and domestic area: Pouring: Invert the bottle and pour (8 sec/m2) on the surface. Spraying (500 – 1000ml bottle): 15 pump strokes per m2. Spraying (50ml bottle): 12 pump strokes per 0,1m2. For industrial area: Pouring: Invert the bottle and pour (8 - 22 sec/m2) on the surface. Spraying (500 – 1000ml bottle): 15 - 41 pump strokes per m2. Spraying (50ml bottle): at least 12 pump strokes per 0,1m2. 4.3.2. Use-specific risk mitigation measures The following risk mitigation measures without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work shall be applied: The use of eye protection during refilling of the application bottles of the product is mandatory. Eye protection according to the European Standard EN ISO 16321 or equivalent. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.4. Use description Table 4 Small surface disinfection, PT4, general public - meta SPC 4 Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant for use in institutional, health care and domestic area. 30/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 Application method(s) Method: Spraying or pouring followed by wiping Detailed description: Application rate(s) and frequency Application Rate: 18 ml/m2 Number and timing of application: maximum 1 application per day. Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and viruses – 5 minutes Category(ies) of users general public (non-professional) Pack sizes and packaging material HDPE bottle 50 - 1000 ml 4.4.1. Use-specific instructions for use Comply with the instructions for use. Pouring: Invert the bottle and pour (8 sec/m2) on the surface. Spraying (500 – 1000ml bottle): 15 pump strokes per m2. Spraying (50ml bottle): 12 pump strokes per 0,1m2. 4.4.2. Use-specific risk mitigation measures The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Avoid contact with eyes. Avoid unnecessary contact to skin. In case of skin dryness, use appropriate skin care lotion. 4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 4 5.1. Instructions for use Spray or pour a sufficient amount of the product on the surface to be disinfected, if needed wipe to ensure complete coverage and allow to act for the required contact time. For use at room temperature. 5.2. Risk mitigation measures Ensure adequate ventilation (e. g. by opening windows or by mechanical ventilation) during application. In small rooms avoid presence of toddlers and pets for 15 min before re-entry. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 31/76EN OJ L, 17.9.2025 Keep out of reach of children and non-target animals or pets. Used wipes must be disposed in a closed container. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or a doctor. IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor. Information to Healthcare personnel or doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE. IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor. IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTER or a doctor. 5.4. Instructions for safe disposal of the product and its packaging Avoid release to the environment. Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 36 months. Store at temperatures not exceeding 40 °C. 6. OTHER INFORMATION Please be aware of the European reference values of 129,28 mg/m3for the active substance Propan-2-ol (CAS No.: 67-63-0) which was used for the risk assessment for the biocidal product. The full title of the EN standard referenced in the Risk mitigation measures are: the European Standard EN ISO 16321 - Eye and face protection for occupational use. With respect to the “Category (ies) of users” note: “Professionals (including industrial users)” means trained professionals if this is required by national legislation. 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Bacillol Market area: EU pure Authorisation number EU-0034602-0005 1-4 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 30 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 45 % (w/w) substance 32/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 1. META SPC 5 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 5 identifier Identifier Meta SPC: meta SPC 5 1.2. Suffix to the authorisation number Number 1-5 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area 2. META SPC 5 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 5 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 30 - 30 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 45 - 45 % (w/w) substance 2.2. Type(s) of formulation of the meta SPC 5 Formulation type(s) XX Impregnated wipes 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 5 Hazard statements H226: Flammable liquid and vapour. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness. EUH066: Repeated exposure may cause skin dryness or cracking. Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read carefully and follow all instructions. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 33/76EN OJ L, 17.9.2025 P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P240: Ground and bond container and receiving equipment. P241: Use explosion-proof electrical equipment. P241: Use explosion-proof lighting equipment. P242: Use non-sparking tools. P243: Take actions to prevent static discharges. P261: Avoid breathing vapours. P264: Wash hands thoroughly after handling. P271: Use only outdoors or in a well-ventilated area. P280: Wear eye protection. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P312: Call a doctor if you feel unwell. P312: Call a POISON CENTER if you feel unwell. P337+P313: If eye irritation persists: Get medical advice. P370+P378: In case of fire: Use water mist, foam, carbon dioxide or powder extinguishing agent to extinguish. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P403+P235: Store in a well-ventilated place. Keep cool. P405: Store locked up. P501: Dispose of contents in accordance with local/ regional/national/international regulations. P501: Dispose of container in accordance with local/ regional/national/international regulations. 34/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Small surface disinfection, PT2, professional and industrial user - meta SPC 5 Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant tissue/wipe for use in industrial, institutional (e.g. hotels), health care (e.g. hospitals, medical practices) and domestic area. Application method(s) Method: Wiping Detailed description: Application rate(s) and frequency Application Rate: 0,2 - 0,5 m2/wipe. The wipe should be replaced as frequently as needed to ensure complete wetting of the surface. Number and timing of application: Product is used as required which may be multiple times per day (frequency: 8 per day). Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and limited spectrum virucidal activity – 5 minutes Category(ies) of users industrial professional Pack sizes and packaging material PET tissues/wipes in a PET/PE flowpack or PET/PE sachet. 4.1.1. Use-specific instructions for use Wipe the surface with a tissue/wipe ensuring the complete coverage with the product. Use 2 - 3 wipes per m2. 4.1.2. Use-specific risk mitigation measures see general section ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 35/76EN OJ L, 17.9.2025 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.2. Use description Table 2 Small surface disinfection, PT2, general public - meta SPC 5 Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant tissue/wipe for use in institutional (e.g. hotels), health care (e.g. hospitals, medical practices) and domestic area. Application method(s) Method: Wiping Detailed description: Application rate(s) and frequency Application Rate: 0,2 - 0,5 m2/wipe. The wipe should be replaced as frequently as needed to ensure complete wetting of the surface. Number and timing of application: maximum 5 applications per day. Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and limited spectrum virucidal activity – 5 minutes Category(ies) of users general public (non-professional) Pack sizes and packaging material PET tissues/wipes in a PET/PE flowpack or PET/PE sachet. 36/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 4.2.1. Use-specific instructions for use Comply with the instructions for use. Wipe the surface with a tissue/wipe ensuring the complete coverage with the product. Use 2 - 3 wipes per m2. 4.2.2. Use-specific risk mitigation measures The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Provide adequate ventilation (e.g. by opening windows or by mechanical ventilation) for 15 min before re-entry. Avoid contact with eyes. Avoid unnecessary contact to skin. In case of skin dryness, use appropriate skin care lotion. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.3. Use description Table 3 Small surface disinfection, PT4, professional and industrial user - meta SPC 5 Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant tissue/wipe for use in industrial, institutional, health care and domestic area. Application method(s) Method: Wiping Detailed description: ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 37/76EN OJ L, 17.9.2025 Application rate(s) and frequency Application Rate: 0,2 - 0,5 m2/wipe. The wipe should be replaced as frequently as needed to ensure complete wetting of the surface. Number and timing of application: Product is used as required which may be multiple times per day (frequency: 8 per day). Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and viruses – 5 minutes Category(ies) of users industrial professional Pack sizes and packaging material PET tissues/wipes in a PET/PE flowpack or PET/PE sachet. 4.3.1. Use-specific instructions for use Wipe the surface with a tissue/wipe ensuring the complete coverage with the product. Use 2 - 3 wipes per m2. 4.3.2. Use-specific risk mitigation measures see general section 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.4. Use description Table 4 Small surface disinfection, PT4, general public - meta SPC 5 Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses Common name: Enveloped viruses 38/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant tissue/wipe for use in institutional, health care and domestic area. Application method(s) Method: Wiping Detailed description: Application rate(s) and frequency Application Rate: 0,2 - 0,5 m2/wipe. The wipe should be replaced as frequently as needed to ensure complete wetting of the surface. Number and timing of application: maximum 1 application per day Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and viruses – 5 minutes Category(ies) of users general public (non-professional) Pack sizes and packaging material PET tissues/wipes in a PET/PE flowpack or PET/PE sachet. 4.4.1. Use-specific instructions for use Comply with the instructions for use. Wipe the surface with a tissue/wipe ensuring the complete coverage with the product. Use 2 - 3 wipes per m2. 4.4.2. Use-specific risk mitigation measures The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Avoid contact with eyes. Avoid unnecessary contact to skin. In case of skin dryness, use appropriate skin care lotion. 4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 39/76EN OJ L, 17.9.2025 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 5 5.1. Instructions for use Wipe the surface with a tissue/wipe ensuring the complete coverage with the product and allow to act for the required contact time. Dispose tissue after use. Only use wet wipes. For use at room temperature. Close the package after opening. 5.2. Risk mitigation measures Used wipes must be disposed in a closed container. Ensure adequate ventilation (e. g. by opening windows or by mechanical ventilation) during application. In small rooms avoid presence of toddlers and pets for 15 min before re-entry. Keep out of reach of children and non-target animals or pets. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor. Information to Healthcare personnel or doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE. IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or a doctor. IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call a POISON CENTRE or a doctor. IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor. 5.4. Instructions for safe disposal of the product and its packaging Avoid release to the environment. Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 36 months Store at temperatures not exceeding 40 °C. 6. OTHER INFORMATION Please be aware of the European reference values of 129,28 mg/m3for the active substance Propan-2-ol (CAS No.: 67-63-0) which was used for the risk assessment for the biocidal product. With respect to the “Category (ies) of users” note: “Professionals (including industrial users)” means trained professionals if this is required by national legislation. 40/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 5 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Bacillol Market area: EU pure Tissues Authorisation number EU-0034602-0006 1-5 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 30 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 45 % (w/w) substance 1. META SPC 6 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 6 identifier Identifier Meta SPC: meta SPC 6 1.2. Suffix to the authorisation number Number 1-6 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area 2. META SPC 6 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 6 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 45 - 45 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 25 - 25 % (w/w) substance ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 41/76EN OJ L, 17.9.2025 2.2. Type(s) of formulation of the meta SPC 6 Formulation type(s) AL Any other liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 6 Hazard statements H226: Flammable liquid and vapour. H318: Causes serious eye damage. H336: May cause drowsiness or dizziness. EUH066: Repeated exposure may cause skin dryness or cracking. Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read carefully and follow all instructions. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P240: Ground and bond container and receiving equipment. P241: Use explosion-proof electrical equipment. P241: Use explosion-proof lighting equipment. P242: Use non-sparking tools. P243: Take actions to prevent static discharges. P261: Avoid breathing vapours. P271: Use only outdoors or in a well-ventilated area. P280: Wear eye protection. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a POISON CENTER. P310: Immediately call a doctor. P312: Call a doctor if you feel unwell. P312: Call a POISON CENTER if you feel unwell. P370+P378: In case of fire: Use water mist, foam, carbon dioxide or powder extinguishing agent to extinguish. 42/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 P403+P233: Store in a well-ventilated place. Keep container tightly closed. P403+P235: Store in a well-ventilated place. Keep cool. P405: Store locked up. P501: Dispose of container in accordance with local/ regional/national/international regulations. P501: Dispose of contents in accordance with local/ regional/national/international regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Small surface disinfection, PT2, professional and industrial user - meta SPC 6 Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant for use in industrial, institutional (e.g. hotels), health care (e.g. hospitals, medical practices) and domestic area. Application method(s) Method: Spraying or pouring followed by wiping Detailed description: Application rate(s) and frequency Application Rate: Institutional, health care and domestic area: 18 ml/m2; Industrial area: 18 - 50 ml/m2. Number and timing of application: Product is used as required which may be multiple times per day (frequency: 8 per day). Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and limited spectrum virucidal activity – 5 minutes Category(ies) of users industrial professional Pack sizes and packaging material HDPE bottle 50 - 1000 ml HDPE container 5 l ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 43/76EN OJ L, 17.9.2025 4.1.1. Use-specific instructions for use Spray or pour a sufficient amount of the product on the surface to be disinfected, if needed wipe to ensure complete coverage and allow to act for the required contact time. For institutional, health care and domestic area: Pouring: Invert the bottle and pour (8 sec/m2) on the surface. Spraying (500 – 1000ml bottle): 15 pump strokes per m2. Spraying (50ml bottle): 12 pump strokes per 0,1m2. For industrial area: Pouring: Invert the bottle and pour (8 - 22 sec/m2) on the surface. Spraying (500 – 1000ml bottle): 15 - 41 pump strokes per m2. Spraying (50ml bottle): at least 12 pump strokes per 0,1m2. 4.1.2. Use-specific risk mitigation measures The following risk mitigation measures without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work shall be applied: The use of eye protection during refilling of the application bottles and handling of the product is mandatory. Eye protection according to the European Standard EN ISO 16321 or equivalent. 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.2. Use description Table 2 Small surface disinfection, PT2, general public - meta SPC 6 Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses 44/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant for use in institutional (e.g. hotels), health care (e.g. hospitals, medical practices) and domestic area. Application method(s) Method: Pouring followed by wiping Detailed description: Application rate(s) and frequency Application Rate: 18 ml/m2. Number and timing of application: maximum 5 applications per day. Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and limited spectrum virucidal activity – 5 minutes Category(ies) of users general public (non-professional) Pack sizes and packaging material HDPE bottle 50 - 1000 ml 4.2.1. Use-specific instructions for use Pour a sufficient amount of the product on the surface to be disinfected, if needed wipe to ensure complete coverage and allow to act for the required contact time. Pouring: Invert the bottle and pour (8 sec/m2) on the surface. Comply with the instructions for use. 4.2.2. Use-specific risk mitigation measures The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Avoid contact with eyes. Avoid unnecessary contact to skin. Avoid splashes. In case of skin dryness, use appropriate skin care lotion. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 45/76EN OJ L, 17.9.2025 4.3. Use description Table 3 Small surface disinfection, PT4, professional and industrial user - meta SPC 6 Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant for use in industrial, institutional, health care and domestic area. Application method(s) Method: Spraying or pouring followed by wiping Detailed description: Application rate(s) and frequency Application Rate: Institutional, health care and domestic area: 18ml/m2; Industrial area: 18 - 50 ml/m2. Number and timing of application: Product is used as required which may be multiple times per day (frequency: 8 per day). Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and viruses – 5 minutes Category(ies) of users industrial professional Pack sizes and packaging material HDPE bottle 50 - 1000 ml HDPE container 5 l 4.3.1. Use-specific instructions for use Spray or pour a sufficient amount of the product on the surface to be disinfected, if needed wipe to ensure complete coverage and allow to act for the required contact time. For institutional, health care and domestic area: Pouring: Invert the bottle and pour (8 sec/m2) on the surface. Spraying (500 – 1000ml bottle): 15 pump strokes per m2. Spraying (50ml bottle): 12 pump strokes per 0,1m2. For industrial area: Pouring: Invert the bottle and pour (8 - 22 sec/m2) on the surface. 46/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 Spraying (500 – 1000ml bottle): 15 - 41 pump strokes per m2. Spraying (50ml bottle): at least 12 pump strokes per 0,1m2. 4.3.2. Use-specific risk mitigation measures The following risk mitigation measures without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work shall be applied: The use of eye protection during refilling of the application bottles and handling of the product is mandatory. Eye protection according to the European Standard EN ISO 16321 or equivalent. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.4. Use description Table 4 Small surface disinfection, PT4, general public - meta SPC 6 Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant for use in institutional, health care and domestic area. Application method(s) Method: Pouring followed by wiping Detailed description: Application rate(s) and frequency Application Rate: 18 ml/m2 Number and timing of application: maximum 1 application per day. Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and viruses – 5 minutes Category(ies) of users general public (non-professional) Pack sizes and packaging material HDPE bottle 50 - 1000 ml ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 47/76EN OJ L, 17.9.2025 4.4.1. Use-specific instructions for use Pour a sufficient amount of the product on the surface to be disinfected, if needed wipe to ensure complete coverage and allow to act for the required contact time. Comply with the instructions for use. Pouring: Invert the bottle and pour (8 sec/m2) on the surface. 4.4.2. Use-specific risk mitigation measures The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Avoid contact with eyes. Avoid unnecessary contact to skin. Avoid splashes. In case of skin dryness, use appropriate skin care lotion. 4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 6 5.1. Instructions for use For use at room temperature. 5.2. Risk mitigation measures Ensure adequate ventilation (e. g. by opening windows or by mechanical ventilation) during application. In small rooms avoid presence of toddlers and pets for 15 min before re-entry. Keep out of reach of children and non-target animals or pets. Used wipes must be disposed in a closed container. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor. Information to Healthcare personnel or doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE. IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or a doctor. IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.. 48/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance. Information to Healthcare personnel or doctor: The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. 5.4. Instructions for safe disposal of the product and its packaging Avoid release to the environment. Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 36 months Store at temperatures not exceeding 40 °C. 6. OTHER INFORMATION Please be aware of the European reference values of 129,28 mg/m3for the active substance Propan-2-ol (CAS No.: 67-63-0) which was used for the risk assessment for the biocidal product. The full title of the EN standard referenced in the Risk mitigation measures are: the European Standard EN ISO 16321 - Eye and face protection for occupational use. With respect to the “Category (ies) of users” note: “Professionals (including industrial users)” means trained professionals if this is required by national legislation. 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 6 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Bacillol AF Market area: EU pro Authorisation number EU-0034602-0007 1-6 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 45 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 25 % (w/w) substance ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 49/76EN OJ L, 17.9.2025 1. META SPC 7 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 7 identifier Identifier Meta SPC: meta SPC 7 1.2. Suffix to the authorisation number Number 1-7 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area 2. META SPC 7 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 7 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 45 - 45 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 25 - 25 % (w/w) substance 2.2. Type(s) of formulation of the meta SPC 7 Formulation type(s) XX Impregnated wipes 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 7 Hazard statements H226: Flammable liquid and vapour. H318: Causes serious eye damage. H336: May cause drowsiness or dizziness. EUH066: Repeated exposure may cause skin dryness or cracking. Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read carefully and follow all instructions. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. 50/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 P240: Ground and bond container and receiving equipment. P241: Use explosion-proof electrical equipment. P241: Use explosion-proof lighting equipment. P242: Use non-sparking tools. P243: Take actions to prevent static discharges. P261: Avoid breathing vapours. P271: Use only outdoors or in a well-ventilated area. P280: Wear eye protection. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a doctor. P312: Call a doctor if you feel unwell. P370+P378: In case of fire: Use water mist, foam, carbon dioxide or powder extinguishing agent to extinguish. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P403+P235: Store in a well-ventilated place. Keep cool. P405: Store locked up. P501: Dispose of contents in accordance with local/ regional/national/international regulations. P501: Dispose of container in accordance with local/ regional/national/international regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Small surface disinfection, PT2, professional and industrial user - meta SPC 7 Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 51/76EN OJ L, 17.9.2025 Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant tissue/wipe for use in industrial, institutional (e.g. hotels), health care (e.g. hospitals, medical practices) and domestic area. Application method(s) Method: Wiping Detailed description: Application rate(s) and frequency Application Rate: 0,2 - 0,5 m2/wipe. The wipe should be replaced as frequently as needed to ensure complete wetting of the surface. Number and timing of application: Product is used as required which may be multiple times per day (frequency: 8 per day). Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and limited spectrum virucidal activity – 5 minutes Category(ies) of users industrial professional Pack sizes and packaging material PET tissues/wipes in PET/PE flowpack or PET/PE sachet 4.1.1. Use-specific instructions for use Wipe the surface with a tissue/wipe ensuring the complete coverage with the product. Use 2 - 3 wipes per m2. 4.1.2. Use-specific risk mitigation measures see general section 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 52/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 4.2. Use description Table 2 Small surface disinfection, PT2, general public - meta SPC 7 Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant tissue/wipe for use in institutional (e.g. hotels), health care (e.g. hospitals, medical practices) and domestic area. Application method(s) Method: Wiping Detailed description: Application rate(s) and frequency Application Rate: 0,2 - 0,5 m2/wipe. The wipe should be replaced as frequently as needed to ensure complete wetting of the surface. Number and timing of application: maximum 5 applications per day. Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and limited spectrum virucidal activity – 5 minutes Category(ies) of users general public (non-professional) Pack sizes and packaging material PET tissues/wipes in PET/PE flowpack or PET/PE sachet 4.2.1. Use-specific instructions for use Comply with the instructions for use. Wipe the surface with a tissue/wipe ensuring the complete coverage with the product. Use 2 - 3 wipes per m2. 4.2.2. Use-specific risk mitigation measures The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Avoid contact with eyes. Avoid unnecessary contact to skin. In case of skin dryness, use appropriate skin care lotion. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 53/76EN OJ L, 17.9.2025 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.3. Use description Table 3 Small surface disinfection, PT4, professional and industrial user - meta SPC 7 Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant tissue/wipe for use in industrial, institutional, health care and domestic area. Application method(s) Method: Wiping Detailed description: Application rate(s) and frequency Application Rate: 0,2 - 0,5 m2/wipe. The wipe should be replaced as frequently as needed to ensure complete wetting of the surface. Number and timing of application: Product is used as required which may be multiple times per day (frequency: 8 per day). Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and viruses – 5 minutes Category(ies) of users industrial professional Pack sizes and packaging material PET tissues/wipes in PET/PE flowpack or PET/PE sachet 4.3.1. Use-specific instructions for use Wipe the surface with a tissue/wipe ensuring the complete coverage with the product. Use 2 - 3 wipes per m2. 54/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 4.3.2. Use-specific risk mitigation measures see general section 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.4. Use description Table 4 Small surface disinfection, PT4, general public - meta SPC 7 Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant tissue/wipe for use in institutional, health care and domestic area. Application method(s) Method: Wiping Detailed description: Application rate(s) and frequency Application Rate: 0,2 - 0,5 m2/wipe. The wipe should be replaced as frequently as needed to ensure complete wetting of the surface. Number and timing of application: maximum 1 application per day. Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and viruses – 5 minutes Category(ies) of users general public (non-professional) Pack sizes and packaging material PET tissues/wipes in PET/PE flowpack or PET/PE sachet ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 55/76EN OJ L, 17.9.2025 4.4.1. Use-specific instructions for use Comply with the instructions for use. Wipe the surface with a tissue/wipe ensuring the complete coverage with the product. Use 2 - 3 wipes per m2. 4.4.2. Use-specific risk mitigation measures The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Avoid contact with eyes. Avoid unnecessary contact to skin. In case of skin dryness, use appropriate skin care lotion. 4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 7 5.1. Instructions for use Wipe the surface with a tissue/wipe ensuring the complete coverage with the product and allow to act for the required contact time. Dispose tissue after use. Only use wet wipes. For use at room temperature. Close the package after opening. 5.2. Risk mitigation measures Ensure adequate ventilation (e. g. by opening windows or by mechanical ventilation) during application. In small rooms avoid presence of toddlers and pets for 15 min before re-entry. Keep out of reach of children and non-target animals or pets. Used wipes must be disposed in a closed container. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor. Information to Healthcare personnel or doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE. IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor. IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. 56/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance. Information to Healthcare personnel or doctor: The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid 5.4. Instructions for safe disposal of the product and its packaging Avoid release to the environment. Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 36 months. Store at temperatures not exceeding 40 °C. 6. OTHER INFORMATION Please be aware of the European reference values of 129,28 mg/m3for the active substance Propan-2-ol (CAS No.: 67-63-0) which was used for the risk assessment for the biocidal product. With respect to the “Category (ies) of users” note: “Professionals (including industrial users)” means trained professionals if this is required by national legislation. 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 7 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Bacillol AF Market area: EU pro Tissues Authorisation number EU-0034602-0008 1-7 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 45 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 25 % (w/w) substance 1. META SPC 8 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 8 identifier Identifier Meta SPC: meta SPC 8 1.2. Suffix to the authorisation number Number 1-8 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 57/76EN OJ L, 17.9.2025 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area 2. META SPC 8 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 8 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 45 - 45 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 25 - 25 % (w/w) substance 2.2. Type(s) of formulation of the meta SPC 8 Formulation type(s) AL Any other liquid 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 8 Hazard statements H226: Flammable liquid and vapour. H318: Causes serious eye damage. H336: May cause drowsiness or dizziness. EUH066: Repeated exposure may cause skin dryness or cracking. Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read carefully and follow all instructions. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P240: Ground and bond container and receiving equipment. P241: Use explosion-proof electrical equipment. P241: Use explosion-proof lighting equipment. P242: Use non-sparking tools. P243: Take actions to prevent static discharges. P261: Avoid breathing vapours. 58/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 P271: Use only outdoors or in a well-ventilated area. P280: Wear eye protection. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a doctor. P312: Call a doctor if you feel unwell. P370+P378: In case of fire: Use water mist, foam, carbon dioxide or powder extinguishing agent to extinguish. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P403+P235: Store in a well-ventilated place. Keep cool. P405: Store locked up. P501: Dispose of contents in accordance with local/ regional/national/international regulations. P501: Dispose of container in accordance with local/ regional/national/international regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Small surface disinfection, PT2, professional and industrial user - meta SPC 8 Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 59/76EN OJ L, 17.9.2025 Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant for use in industrial, institutional (e.g. hotels), health care (e.g. hospitals, medical practices) and domestic area. Application method(s) Method: Spraying or pouring followed by wiping Detailed description: Application rate(s) and frequency Application Rate: Institutional, health care and domestic area: 18 ml/m2; Industrial area: 18 - 50 ml/m2. Number and timing of application: Product is used as required which may be multiple times per day (frequency: 8 per day). Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and limited spectrum virucidal activity – 5 minutes Category(ies) of users industrial professional Pack sizes and packaging material HDPE bottle 50 - 1000 ml HDPE container 5 l 4.1.1. Use-specific instructions for use Spray or pour a sufficient amount of the product on the surface to be disinfected, if needed wipe to ensure complete coverage and allow to act for the required contact time. For use at room temperature. For institutional, health care and domestic area: Pouring: Invert the bottle and pour (8 sec/m2) on the surface. Spraying (500 – 1000ml bottle): 15 pump strokes per m2. Spraying (50ml bottle): 12 pump strokes per 0,1m2. For industrial area: Pouring: Invert the bottle and pour (8 - 22 sec/m2) on the surface. Spraying (500 – 1000ml bottle): 15 - 41 pump strokes per m2. Spraying (50ml bottle): at least 12 pump strokes per 0,1m2. 4.1.2. Use-specific risk mitigation measures The following risk mitigation measures without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work shall be applied: The use of eye protection during refilling of the application bottles and handling of the product is mandatory. Eye protection according to the European Standard EN ISO 16321 or equivalent. 60/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.2. Use description Table 2 Small surface disinfection, PT2, general public - meta SPC 8 Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant for use in institutional (e.g. hotels), health care (e.g. hospitals, medical practices) and domestic area. Application method(s) Method: Pouring followed by wiping Detailed description: Application rate(s) and frequency Application Rate: 18 ml/m2 Number and timing of application: maximum 5 applications per day. Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and limited spectrum virucidal activity – 5 minutes Category(ies) of users general public (non-professional) Pack sizes and packaging material HDPE bottle 50 - 1000 ml ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 61/76EN OJ L, 17.9.2025 4.2.1. Use-specific instructions for use Pour a sufficient amount of the product on the surface to be disinfected, if needed wipe to ensure complete coverage and allow to act for the required contact time. Pouring: Invert the bottle and pour (8 sec/m2) on the surface. For use at room temperature. Comply with the instructions for use. 4.2.2. Use-specific risk mitigation measures The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Avoid contact with eyes. Avoid unnecessary contact to skin. Avoid splashes. In case of skin dryness, use appropriate skin care lotion. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.3. Use description Table 3 Small surface disinfection, PT4, professional and industrial user - meta SPC 8 Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant for use in industrial, institutional, health care and domestic area. Application method(s) Method: Spraying or pouring followed by wiping Detailed description: 62/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 Application rate(s) and frequency Application Rate: Institutional, health care and domestic area: 18ml/m2; Industrial area: 18 - 50 ml/m2 Number and timing of application: Product is used as required which may be multiple times per day (frequency: 8 per day). Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and viruses – 5 minutes Category(ies) of users industrial professional Pack sizes and packaging material HDPE bottle 50 - 1000 ml HDPE container 5 l 4.3.1. Use-specific instructions for use Spray or pour a sufficient amount of the product on the surface to be disinfected, if needed wipe to ensure complete coverage and allow to act for the required contact time. For bactericidal and yeasticidal efficacy: For use at 4°C up to room temperature. For efficacy against other target organisms: For use at room temperature. For institutional, health care and domestic area: Pouring: Invert the bottle and pour (8 sec/m2) on the surface. Spraying (500 – 1000ml bottle): 15 pump strokes per m2. Spraying (50ml bottle): 12 pump strokes per 0,1m2. For industrial area: Pouring: Invert the bottle and pour (8 - 22 sec/m2) on the surface. Spraying (500 – 1000ml bottle): 15 - 41 pump strokes per m2. Spraying (50ml bottle): at least 12 pump strokes per 0,1m2. 4.3.2. Use-specific risk mitigation measures The following risk mitigation measures without prejudice to the application by employers of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work shall be applied: The use of eye protection during refilling of the application bottles and handling of the product is mandatory. Eye protection according to the European Standard EN ISO 16321 or equivalent. 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 63/76EN OJ L, 17.9.2025 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.4. Use description Table 4 Small surface disinfection, PT4, general public - meta SPC 8 Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant for use in institutional, health care and domestic area. Application method(s) Method: Pouring followed by wiping Detailed description: Application rate(s) and frequency Application Rate: 18 ml/m2. Number and timing of application: maximum 1 application per day. Contact times: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and viruses – 5 minutes Category(ies) of users general public (non-professional) Pack sizes and packaging material HDPE bottle 50 - 1000 ml 4.4.1. Use-specific instructions for use Pour a sufficient amount of the product on the surface to be disinfected, if needed wipe to ensure complete coverage and allow to act for the required contact time. For bactericidal and yeasticidal efficacy: For use at 4°C up to room temperature. For efficacy against other target organisms: For use at room temperature. Comply with the instructions for use. Pouring: Invert the bottle and pour (8 sec/m2) on the surface. 64/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 4.4.2. Use-specific risk mitigation measures The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Avoid contact with eyes. Avoid unnecessary contact to skin. Avoid splashes. In case of skin dryness, use appropriate skin care lotion. 4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 8 5.1. Instructions for use 5.2. Risk mitigation measures Ensure adequate ventilation (e. g. by opening windows or by mechanical ventilation) during application. In small rooms avoid presence of toddlers and pets for 15 min before re-entry. Keep out of reach of children and non-target animals or pets. Used wipes must be disposed in a closed container. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor. Information to Healthcare personnel or doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE. IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor. IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance. Information to Healthcare personnel or doctor: The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 65/76EN OJ L, 17.9.2025 5.4. Instructions for safe disposal of the product and its packaging Avoid release to the environment. Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 36 months Store at temperatures not exceeding 40 °C. 6. OTHER INFORMATION Please be aware of the European reference values of 129,28 mg/m3for the active substance Propan-2-ol (CAS No.: 67-63-0) which was used for the risk assessment for the biocidal product. The full title of the EN standard referenced in the Risk mitigation measures are: the European Standard EN ISO 16321 - Eye and face protection for occupational use. With respect to the “Category (ies) of users” note: “Professionals (including industrial users)” means trained professionals if this is required by national legislation. 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 8 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Bacillol AF Market area: EU classic Authorisation number EU-0034602-0009 1-8 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 45 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 25 % (w/w) substance 1. META SPC 9 ADMINISTRATIVE INFORMATION 1.1. Meta SPC 9 identifier Identifier Meta SPC: meta SPC 9 1.2. Suffix to the authorisation number Number 1-9 1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area 66/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 2. META SPC 9 COMPOSITION 2.1. Qualitative and quantitative information on the composition of the meta SPC 9 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 45 - 45 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 25 - 25 % (w/w) substance 2.2. Type(s) of formulation of the meta SPC 9 Formulation type(s) XX Impregnated wipes 3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 9 Hazard statements H226: Flammable liquid and vapour. H318: Causes serious eye damage. H336: May cause drowsiness or dizziness. EUH066: Repeated exposure may cause skin dryness or cracking. Precautionary statements P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read carefully and follow all instructions. P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233: Keep container tightly closed. P240: Ground and bond container and receiving equipment. P241: Use explosion-proof electrical equipment. P241: Use explosion-proof lighting equipment. P242: Use non-sparking tools. P243: Take actions to prevent static discharges. P261: Avoid breathing vapours. P271: Use only outdoors or in a well-ventilated area. P280: Wear eye protection. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 67/76EN OJ L, 17.9.2025 P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310: Immediately call a doctor. P310: Immediately call a POISON CENTER. P312: Call a doctor if you feel unwell. P312: Call a POISON CENTER if you feel unwell. P370+P378: In case of fire: Use water mist, foam, carbon dioxide or powder extinguishing agent to extinguish. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P403+P235: Store in a well-ventilated place. Keep cool. P405: Store locked up. P501: Dispose of contents in accordance with local/ regional/national/international regulations. P501: Dispose of container in accordance with local/ regional/national/international regulations. 4. AUTHORISED USE(S) OF THE META SPC 4.1. Use description Table 1 Small surface disinfection, PT2, professional and industrial user - meta SPC 9 Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant tissue/wipe for use in industrial, institutional (e.g. hotels), health care (e.g. hospitals, medical practices) and domestic area. 68/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 Application method(s) Method: Wiping Detailed description: Application rate(s) and frequency Application Rate: 0,2 - 0,5 m2/wipe. The wipe should be replaced as frequently as needed to ensure complete wetting of the surface. Number and timing of application: Product is used as required which may be multiple times per day (frequency: 8 per day). Contact times: 1) For Bacillol AF classic Tissues and Bacillol classic Wipes: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and limited spectrum virucidal activity – 5 minutes 2) For Bacillol classic Tissues: 5 minutes, with 2 tissues one above the other Category(ies) of users industrial professional Pack sizes and packaging material PET tissues/wipes in PET/PE flowpack or PET/PE sachet PET/Cellulose tissues/wipes in HDPE dispenser or PET/PE sachet 4.1.1. Use-specific instructions for use For use at room temperature. Wipe the surface with a tissue/wipe ensuring the complete coverage with the product. Bacillol classic Tissues: Use 5 - 8 wipes per m2. Bacillol AF classic Tissues: Use 2 - 3 wipes per m2. Bacillol classic Wipes: Use ca. 1 wipe per m2. 4.1.2. Use-specific risk mitigation measures see general section 4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 69/76EN OJ L, 17.9.2025 4.2. Use description Table 2 Small surface disinfection, PT2, general public - meta SPC 9 Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses (limited spectrum virucidal activity) Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant tissue/wipe for use in institutional (e.g. hotels), health care (e.g. hospitals, medical practices) and domestic area. Application method(s) Method: Wiping Detailed description: Application rate(s) and frequency Application Rate: 0,2 - 0,5 m2/wipe. The wipe should be replaced as frequently as needed to ensure complete wetting of the surface. Number and timing of application: maximum 5 applications per day. Contact times: 1) For Bacillol AF classic Tissues and Bacillol classic Wipes: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and limited spectrum virucidal activity – 5 minutes 2) For Bacillol classic Tissues: 5 minutes, with 2 tissues one above the other Category(ies) of users general public (non-professional) Pack sizes and packaging material PET tissues/wipes in PET/PE flowpack or PET/PE sachet PET/Cellulose tissues/wipes in HDPE dispenser or PET/PE sachet 4.2.1. Use-specific instructions for use For use at room temperature. Comply with the instructions for use. Wipe the surface with a tissue/wipe ensuring the complete coverage with the product. Bacillol classic Tissues: Use 5 - 8 wipe per m2. Bacillol AF classic Tissues: Use 2 - 3 wipes per m2. Bacillol classic Wipes: Use ca. 1 wipe per m2. 70/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 4.2.2. Use-specific risk mitigation measures The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Avoid contact with eyes. Avoid unnecessary contact to skin. In case of skin dryness, use appropriate skin care lotion. 4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 4.3. Use description Table 3 Small surface disinfection, PT4, professional and industrial user - meta SPC 9 Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant tissue/wipe for use in industrial, institutional, health care and domestic area. Application method(s) Method: Wiping Detailed description: Application rate(s) and frequency Application Rate: 0,2 - 0,5 m2/wipe. The wipe should be replaced as frequently as needed to ensure complete wetting of the surface. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 71/76EN OJ L, 17.9.2025 Number and timing of application: Product is used as required which may be multiple times per day (frequency: 8 per day). Contact times: 1) For Bacillol AF classic Tissues and Bacillol classic Wipes: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and viruses – 5 minutes 2) For Bacillol classic Tissues: 5 minutes, with 2 tissues one above the other Category(ies) of users industrial professional Pack sizes and packaging material PET tissues/wipes in PET/PE flowpack or PET/PE sachet PET/Cellulose tissues/wipes in HDPE dispenser or PET/PE sachet 4.3.1. Use-specific instructions for use For bactericidal and yeasticidal efficacy: For use at 4°C up to room temperature. For efficacy against other target organisms: For use at room temperature. Wipe the surface with a tissue/wipe ensuring the complete coverage with the product. Bacillol classic Tissues: Use 5 - 8 wipes per m2. Bacillol AF classic Tissues: Use 2 - 3 wipes per m2. Bacillol classic Wipes: Use ca. 1 wipe per m2. 4.3.2. Use-specific risk mitigation measures see general section 4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment see general section 4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 72/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 4.4. Use description Table 4 Small surface disinfection, PT4, general public - meta SPC 9 Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Common name: Bacteria stage) Common name: Yeasts Common name: Fungi Common name: Mycobacteria Common name: Viruses Common name: Enveloped viruses Field(s) of use indoor use The product is a ready-to-use hard non-porous surface disinfectant tissue/wipe for use in institutional, health care and domestic area. Application method(s) Method: Wiping Detailed description: Application rate(s) and frequency Application Rate: 0,2 - 0,5 m2/wipe. The wipe should be replaced as frequently as needed to ensure complete wetting of the surface. Number and timing of application: maximum 1 application per day. Contact times: 1) For Bacillol AF classic Tissues and Bacillol classic Wipes: Bacteria, yeasts, mycobacteria and enveloped viruses – 1 minute Fungi and viruses – 5 minutes 2) For Bacillol classic Tissues: 5 minutes, with 2 tissues one above the other Category(ies) of users general public (non-professional) Pack sizes and packaging material PET tissues/wipes in PET/PE flowpack or PET/PE sachet PET/Cellulose tissues/wipes in HDPE dispenser or PET/PE sachet 4.4.1. Use-specific instructions for use For bactericidal and yeasticidal efficacy: For use at 4°C up to room temperature. For efficacy against other target organisms: For use at room temperature. Comply with the instructions for use. Wipe the surface with a tissue/wipe ensuring the complete coverage with the product. Bacillol classic Tissues: Use 5 - 8 wipes per m2. Bacillol AF classic Tissues: Use 2 - 3 wipes per m2. Bacillol classic Wipes: Use ca. 1 wipe per m2. ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 73/76EN OJ L, 17.9.2025 4.4.2. Use-specific risk mitigation measures The authorisation holder shall specify the application rate in a simple, easily understandable form on the label. Avoid contact with eyes. Avoid unnecessary contact to skin. In case of skin dryness, use appropriate skin care lotion. 4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand. 4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging see general section 4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage see general section 5. GENERAL DIRECTIONS FOR USE OF THE META SPC 9 5.1. Instructions for use Wipe the surface with a tissue/wipe ensuring the complete coverage with the product and allow to act for the required contact time. Only use wet wipes. Close the package after opening. 5.2. Risk mitigation measures Ensure adequate ventilation (e. g. by opening windows or by mechanical ventilation) during application. In small rooms avoid presence of toddlers and pets for 15 min before re-entry. Keep out of reach of children and non-target animals or pets. Used wipes must be disposed in a closed container. 5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce vomiting. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a POISON CENTRE or a doctor. Information to Healthcare personnel or doctor: Initiate life support measures if needed, thereafter call a POISON CENTRE. IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or a doctor. IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor. IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance. Information to Healthcare personnel or doctor: The eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid. 74/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/ojEN OJ L, 17.9.2025 5.4. Instructions for safe disposal of the product and its packaging Avoid release to the environment. Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. 5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Shelf-life: 36 months Store at temperatures not exceeding 40 °C. 6. OTHER INFORMATION Please be aware of the European reference values of 129,28 mg/m3for the active substance Propan-2-ol (CAS No.: 67-63-0) which was used for the risk assessment for the biocidal product. With respect to the “Category (ies) of users” note: “Professionals (including industrial users)” means trained professionals if this is required by national legislation. 7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 9 7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Bacillol AF Market area: EU classic Tissues Authorisation number EU-0034602-0010 1-9 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 45 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 25 % (w/w) substance 7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Bacillol Market area: EU classic Tissues Authorisation number EU-0034602-0011 1-9 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 45 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 25 % (w/w) substance ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj 75/76EN OJ L, 17.9.2025 7.3. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Bacillol Market area: EU classic Wipes Authorisation number EU-0034602-0012 1-9 Common name IUPAC name Function CAS number EC number Content (%) Propan-1-ol Active 71-23-8 200-746-9 45 % (w/w) substance Propan-2-ol Active 67-63-0 200-661-7 25 % (w/w) substance 76/76 ELI: http://data.europa.eu/eli/reg_impl/2025/1878/oj

Continue your research