See Full Document Text
Official Journal EN
of the European Union L series
2025/2221 7.11.2025
COMMISSION IMPLEMENTING REGULATION(EU) 2025/2221
of 31 October 2025
amending Implementing Regulation (EU) 2023/364 as regards administrative changes to the Union
authorisation of the biocidal product family ‘IPA Family 1’
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning
the making available on the market and use of biocidal products(1), and in particular Article 50(2) thereof,
Whereas:
(1) On 16 February 2023, Commission Implementing Regulation (EU) 2023/364(2) granted a Union authorisation,
under number EU-0028425-0000, to Ecolab Deutschland GmbH for the making available on the market and use of
the biocidal product family ‘IPA Family 1’. Annex II to that Implementing Regulation provides the summary of
product characteristics for that biocidal product family.
(2) On 30 November 2023 and 17 December 2024, Ecolab Deutschland GmbH submitted notifications to the European
Chemicals Agency (‘the Agency’), in accordance with Article 11(1) of Commission Implementing Regulation (EU)
No 354/2013(3), of administrative changes to the Union authorisation for the biocidal product family ‘IPA Family 1’,
as referred to in Title 1 of the Annex to that Regulation. The notifications were recorded in the Register for Biocidal
Products (‘the Register’) under case numbers BC-KE090454-43 and BC-JF101949-39. The notified proposed changes
to that authorisation concern a clarification of the instructions for use for all products in the family, the addition of
new trade names, the removal and addition of the biocidal product formulators and the addition of active substance
manufacturers.
(3) On 24 January 2024 and 16 January 2025, the Agency submitted to the Commission, in accordance with
Article 11(3) of Implementing Regulation (EU) No 354/2013, opinions(4)on the notified administrative changes to
the Union authorisation for the biocidal product family ‘IPA Family 1’, together with a revised summary of the
biocidal product characteristics. In the opinions, the Agency concludes that the proposed changes are administrative
changes as referred to in Article 50(3), point (a), of Regulation (EU) No 528/2012 and as specified in Title 1, Sections
1 and 2, of the Annex to Implementing Regulation (EU) No 354/2013, and that after the implementation of the
changes, the conditions of Article 19 of Regulation (EU) No 528/2012 will still be met.
(4) On 23 January 2025, the Agency transmitted to the Commission a revised summary of the biocidal product
characteristics of the Union authorisation for the biocidal product family ‘IPA Family 1’ in all the official languages
of the Union, covering all the administrative changes applied for, in accordance with Article 11(6) of Implementing
Regulation (EU) No 354/2013.
(1) OJ L 167, 27.6.2012, p. 1, ELI: http://data.europa.eu/eli/reg/2012/528/oj.
(2) Commission Implementing Regulation (EU) 2023/364 of 16 February 2023 granting a Union authorisation for the biocidal product
family ‘IPA Family 1’ in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L 50,
17.2.2023, p. 28, ELI: http://data.europa.eu/eli/reg_impl/2023/364/oj).
(3) Commission Implementing Regulation (EU) No 354/2013 of 18 April 2013 on changes of biocidal products authorised in accordance
with Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L 109, 19.4.2013, p. 4, ELI: http://data.europa.
eu/eli/reg_impl/2013/354/oj).
(4) ECHA Opinions Nos UAD-C-1706275-25-00/F of 24 January 2024 and UAD-C-1790252-35-00/F of 16 January 2025 on the
administrative change of the Union authorisation of the biocidal product family ‘IPA Family 1’, https://echa.europa.eu/opinions-on-
union-authorisation.
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 1/28EN
OJ L, 7.11.2025
(5) The Commission concurs with the opinions of the Agency and therefore considers it appropriate to amend the Union
authorisation for the biocidal product family ‘IPA Family 1’ to introduce the administrative changes requested by
Ecolab Deutschland GmbH.
(6) Except for the amendments regarding the administrative changes, all other information included in the summary of
the biocidal product characteristics of ‘IPA Family 1’ as set out in Annex II to Implementing Regulation
(EU) 2023/364 remains unchanged.
(7) In order to enhance clarity and to ease the access of users and interested parties to the consolidated version of the
summary of the biocidal product characteristics which is to be published by the Agency, Annex II to Implementing
Regulation (EU) 2023/364 should be replaced in its entirety. Due to a change in the format used for the generation
of the summary of biocidal product characteristics in the Register in February 2024, the summary of biocidal
product characteristics in that Annex should also include some minor editorial and layout changes.
(8) Implementing Regulation (EU) No 2023/364 should therefore be amended accordingly,
HAS ADOPTED THIS REGULATION:
Article 1
Annex II to Implementing Regulation (EU) No 2023/364 is replaced by the text in the Annex to this Regulation.
Article 2
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the
European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 31 October 2025.
For the Commission
The President
Ursula VON DER LEYEN
2/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/ojEN
OJ L, 7.11.2025
ANNEX
Summary of product characteristics for a biocidal product family
IPA Family 1
Product type(s)
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
PT04: Food and feed area
Authorisation numberEU-0028425-0000
R4BP asset numberEU-0028425-0000
PART I
FIRST INFORMATION LEVEL
1. ADMINISTRATIVE INFORMATION
1.1. Family name
Name IPA Family 1
1.2. Product type(s)
Product type(s) PT02: Disinfectants and algaecides not intended for
direct application to humans or animals
PT04: Food and feed area
1.3. Authorisation holder
Name Ecolab Deutschland GmbH
Name and address of the authorisation holder
Address Ecolab Allee 1 40789 Monheim am Rhein
Germany
Authorisation number EU-0028425-0000
R4BP asset number EU-0028425-0000
Date of the authorisation 9.3.2023
Expiry date of the authorisation 28.2.2033
1.4. Manufacturer(s) of the product
Name of manufacturer Ecolab Europe GmbH
Address of manufacturer Richtistrasse, 7 8304 Walliselen Switzerland
Location of manufacturing sites Ecolab Europe GmbH site 1 Richtistrasse, 7 8304
Walliselen Switzerland
Name of manufacturer Ecolab Limited
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 3/28EN
OJ L, 7.11.2025
Address of manufacturer Brunel Way, Baglan Energy Park, SA11 2GA Neath
United Kingdom of Great Britain and Northern Ireland
(the)
Location of manufacturing sites Ecolab Limited site 1 Brunel Way, Baglan Energy Park,
SA11 2GA Neath United Kingdom of Great Britain and
Northern Ireland (the)
Name of manufacturer Ecolab Leeds
Address of manufacturer Lotherton Way, Garforth, LS25 2JY Leeds United
Kingdom of Great Britain and Northern Ireland (the)
Location of manufacturing sites Ecolab Leeds site 1 Lotherton Way, Garforth, LS25 2JY
Leeds United Kingdom of Great Britain and Northern
Ireland (the)
Name of manufacturer Esoform S.p.A.
Address of manufacturer Viale del Lavoro 10, 45100 Rovigo Italy
Location of manufacturing sites Esoform S.p.A. site 1 Viale del Lavoro 10, 45100
Rovigo Italy
Name of manufacturer Nalco Deutschland Manufacturing GmbH und Co.KG
Address of manufacturer Justus-von-Liebig-Str. 11 D-64584 Biebesheim
Germany
Location of manufacturing sites Nalco Deutschland Manufacturing GmbH und Co.KG
site 1 Justus-von-Liebig-Str. 11 D-64584 Biebesheim
Germany
Name of manufacturer Ecolab NETHERLANDS BV
Address of manufacturer Brugwal 11, 3432NZ Nieuwegein Netherlands (the)
Location of manufacturing sites Ecolab NETHERLANDS BV site 1 Brugwal 11, 3432NZ
Nieuwegein Netherlands (the)
Name of manufacturer Ecolab Weavergate
Address of manufacturer Winnington Avenue CW8 3AA Northwich Cheshire
United Kingdom of Great Britain and Northern Ireland
(the)
Location of manufacturing sites Ecolab Weavergate site 1 Winnington Avenue CW8
3AA Northwich Cheshire United Kingdom of Great
Britain and Northern Ireland (the)
Name of manufacturer Ecolab Mullingar, Ireland
4/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/ojEN
OJ L, 7.11.2025
Address of manufacturer Forest Park, Zone C Mullingar Ind. Estate, - Mullingar,
Co. Westmeath, Ireland
Location of manufacturing sites Ecolab Mullingar, Ireland site 1 Forest Park, Zone C
Mullingar Ind. Estate, - Mullingar, Co. Westmeath,
Ireland
Name of manufacturer Ecolab d.o.o.
Address of manufacturer Vajngerlova 4 2000 Maribor Slovenia
Location of manufacturing sites Ecolab d.o.o. site 1 Vajngerlova 4 2000 Maribor
Slovenia
Name of manufacturer Ecolab Rozzano, Italy
Address of manufacturer Via A. Grandi 9/11, 20089 Rozzano (MI) Italy
Location of manufacturing sites Ecolab Rozzano, Italy site 1 Via A. Grandi 9/11, 20089
Rozzano (MI) Italy
Name of manufacturer Ecolab B.V.B.A
Address of manufacturer Havenlaan 4 3980 Tessenderlo Belgium
Location of manufacturing sites Ecolab B.V.B.A site 1 Havenlaan 4 3980 Tessenderlo
Belgium
Name of manufacturer Nalco Española Manufacturing, SLU
Address of manufacturer C/Tramuntana s/n Polígono Industrial de Celrà 17460
Celrà Spain
Location of manufacturing sites Nalco Española Manufacturing, SLU site 1 C/
Tramuntana s/n Polígono Industrial de Celrà 17460
Celrà Spain
Name of manufacturer Ecolab production France SAS
Address of manufacturer BP509, Avenue de Général Patton 51006 Châlons-en-
Champagne France
Location of manufacturing sites Ecolab production France SAS site 1 BP509, Avenue de
Général Patton 51006 Châlons-en-Champagne France
Name of manufacturer Ecolab Mandra, Greece
Address of manufacturer 25km Old National Road Athens- Theve, - Mandra
Attica Greece
Location of manufacturing sites Ecolab Mandra, Greece site 1 25km Old National Road
Athens- Theve, - Mandra Attica Greece
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 5/28EN
OJ L, 7.11.2025
Name of manufacturer NALCO FINLAND MANUFACTURING OY
Address of manufacturer Kivikummuntie 1, FIN-07955 Tesjoki Finland
Location of manufacturing sites NALCO FINLAND MANUFACTURING OY site 1
Kivikummuntie 1, FIN-07955 Tesjoki Finland
Name of manufacturer Manufacturing Plant Cisterna Nalco
Address of manufacturer Via Ninfina II 4012 Cisterna Di Latina, Italy
Location of manufacturing sites Manufacturing Plant Cisterna Nalco site 1 Via Ninfina II
4012 Cisterna Di Latina Italy
Name of manufacturer Manufacturing Plant Fawley Nalco
Address of manufacturer One buisness center 1180 SO45 3NP Hardley Hants
United Kingdom of Great Britain and Northern Ireland
(the)
Location of manufacturing sites Manufacturing Plant Fawley Nalco site 1 One buisness
center 1180 SO45 3NP Hardley Hants United Kingdom
of Great Britain and Northern Ireland (the)
Name of manufacturer Nalco Champion Plant, Tooling Plant, Aberdeen Nalco
Address of manufacturer Minto Avenue, Alten Industrial Estate AB12 3JZ
Aberdeen United Kingdom of Great Britain and
Northern Ireland (the)
Location of manufacturing sites Nalco Champion Plant, Tooling Plant, Aberdeen Nalco
site 1 Minto Avenue, Alten Industrial Estate AB12 3JZ
Aberdeen United Kingdom of Great Britain and
Northern Ireland (the)
Name of manufacturer Microtek Medical B.V.
Address of manufacturer Hekkehorst, 24 7207 BN Zutphen Netherlands (the)
Location of manufacturing sites Microtek Medical B.V. site 1 Hekkehorst, 24 7207 BN
Zutphen Netherlands (the)
Name of manufacturer Microtek Medical Malta Ltd.
Address of manufacturer Sorbonne Centre F20 Mosta Technopark MST 3000
Mosta Malta
Location of manufacturing sites Microtek Medical Malta Ltd. site 1 Sorbonne Centre F20
Mosta Technopark MST 3000 Mosta Malta
6/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/ojEN
OJ L, 7.11.2025
Name of manufacturer Innovate GmbH
Address of manufacturer Am Hohen Stein, 11 06618 Naumburg Germany
Location of manufacturing sites Innovate GmbH site 1 Am Hohen Stein, 11 06618
Naumburg Germany
Name of manufacturer CHRISTEYNS FRANCE S.A.
Address of manufacturer 31 rue de la Maladrie 44120 Vertou France
Location of manufacturing sites CHRISTEYNS FRANCE S.A. site 1 54 avenue de la Plaine
- ZI 13106 Rousset France
Name of manufacturer Techtex
Address of manufacturer Units 7 & 8, Rhodes Business Park, Silbum Way
M24 4NE Middelton, Manchester United Kingdom of
Great Britain and Northern Ireland (the)
Location of manufacturing sites Techtex site 1 Units 7 & 8, Rhodes Business Park,
Silbum Way M24 4NE Middelton, Manchester United
Kingdom of Great Britain and Northern Ireland (the)
Name of manufacturer Technical Textile Services Ltd
Address of manufacturer Unit 4, Rhodes Business Park, Silburn Way M24 4NE
Middleton, Manchester United Kingdom of Great Britain
and Northern Ireland (the)
Location of manufacturing sites Technical Textile Services Ltd Unit 4, Rhodes Business
Park, Silburn Way M24 4NE Middleton, Manchester
United Kingdom of Great Britain and Northern Ireland
(the)
Name of manufacturer Pal International Limited
Address of manufacturer Unit 3 Mountpark, Victoria Road LE67 1FA Ellistown,
Coalville United Kingdom of Great Britain and Northern
Ireland (the)
Location of manufacturing sites Pal International Limited Unit 3 Mountpark, Victoria
Road LE67 1FA Ellistown, Coalville United Kingdom of
Great Britain and Northern Ireland (the)
Name of manufacturer CID LINES NV
Address of manufacturer Waterpoortstraat 2 8900 Ieper Belgium
Location of manufacturing sites CID LINES NV Waterpoortstraat 2 8900 Ieper Belgium
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 7/28EN
OJ L, 7.11.2025
Name of manufacturer LABORATOIRES ANIOS
Address of manufacturer 3330 Rue de Lille 59262 Sainghin-en-Mélantois France
Location of manufacturing sites LABORATOIRES ANIOS 3330 Rue de Lille 59262
Sainghin-en-Mélantois France
1.5. Manufacturer(s) of the active substance(s)
Active substance Propan-2-ol
Name of manufacturer Ineos Solvents Germany GmbH
Address of manufacturer Römerstrasse 733, D-47443 Moers Germany
Location of manufacturing sites Ineos Solvents Germany GmbH site 1 Shamrockstrasse
88 D-44623 Herne Germany
Ineos Solvents Germany GmbH site 2 Romestrasse, 733,
D-47443 Moers Germany
Active substance Propan-2-ol
Name of manufacturer Shell Chemicals Europe B.V.
Address of manufacturer Postbus 2334 3000 CH Rotterdam Netherlands (the)
Location of manufacturing sites Shell Chemicals Europe B.V. site 1 Chemie BV/Shell
Nederland Raffinaderij B.V., Vondelingenweg 601 3196
KK Rotterdam-Pernis, Netherlands (the)
Active substance Propan-2-ol
Name of manufacturer ExxonMobil Chemical Europe
Address of manufacturer Hermeslaan 2 1831 Machelen Belgium
Location of manufacturing sites ExxonMobil Chemical Europe site 1 Fawley Refinery and
Petrochemical Plant, Fawley SO45 1TX Southampton
United Kingdom of Great Britain and Northern Ireland
(the)
ExxonMobil Chemical Europe site 2 Baton Rouge
Chemical Plant 4999 Scenic Highway 70805-3359 LA
United States (the)
Active substance Propan-2-ol
Name of manufacturer Brenntag N.V.
Address of manufacturer Nijverheidslaan, 38 8540 Deerlijk Belgium
Location of manufacturing sites Shell Energy and Chemicals Park Rotterdam Shell
Nederland Chemie BV/Shell Nederland Raffinaderij B.V.,
Vondelingenweg 601 3196 KK Rotterdam-Pernis
Netherlands (the)
ExxonMobil Baton Rouge Refinery 4045 Scenic
Highway Baton Rouge 70805 LA United States (the)
8/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/ojEN
OJ L, 7.11.2025
Active substance Propan-2-ol
Name of manufacturer UNIVAR
Address of manufacturer Steuber Drive M44 5AL Manchester United Kingdom of
Great Britain and Northern Ireland (the)
Location of manufacturing sites ExxonMobil Chemicals Fawley Refinery and
Petrochemical Plant, Fawley SO45 1TX Southampton
United Kingdom of Great Britain and Northern Ireland
(the)
2. PRODUCT FAMILY COMPOSITION AND FORMULATION
2.1. Qualitative and quantitative information on the composition of the family
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol Active 67-63-0 200-661-7 30,3 - 65,66 %
substance (w/w)
2.2. Type(s) of formulation
Formulation type(s) AE Aerosol dispenser
AL Any other liquid
XX – Ready to use wipe impregnated with water based
liquid
PART II
SECOND INFORMATION LEVEL META SPC(S)
1. META SPC 1 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 1 identifier
Identifier Meta SPC: Meta-SPC 1.1
1.2. Suffix to the authorisation number
Number 1-1
1.3. Product type(s)
Product type(s) PT02: Disinfectants and algaecides not intended for
direct application to humans or animals
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 9/28EN
OJ L, 7.11.2025
2. META SPC 1 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 1
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol Active 67-63-0 200-661-7 60,61 - 65,66 %
substance (w/w)
2.2. Type(s) of formulation of the meta SPC 1
Formulation type(s) AL Any other liquid
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1
Hazard statements H225: Highly flammable liquid and vapour.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.
EUH066: Repeated exposure may cause skin dryness or
cracking.
Precautionary statements P210: Keep away from heat, hot surfaces, sparks, open
flames and other ignition sources. No smoking.
P280: Wear eye protection.
P280: Wear face protection.
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Use # 1.1 – Disinfection of surfaces in cleanrooms by spraying or mopping.
Product type PT02: Disinfectants and algaecides not intended for direct
application to humans or animals
Where relevant, an exact description of the -
authorised use
Target organism(s) (including development Scientific name: no data
stage) Common name: Bacteria
Development stage: no data
Scientific name: no data
Common name: Yeasts
Development stage: no data
Scientific name: no data
Common name: fungi
Development stage: no data
Scientific name: no data
Common name: Enveloped viruses
Development stage: no data
Field(s) of use indoor use
Disinfection of cleanroom hard non-porous surfaces in life sciences
industry.
10/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/ojEN
OJ L, 7.11.2025
Application method(s) Method: Trigger spraying or mopping
Detailed description:
Direct application onto surfaces by trigger spraying followed by
wiping with a dry wipe for distribution or mopping.
Application rate(s) and frequency Application Rate:
c.a. 18 ml/m2
ready to use product
Number and timing of application:
As required
Category(ies) of users professional
Pack sizes and packaging material 0,5 liter - 10 liters Polyvinylpyrrolidone (PVP) or (High density
polyetheylene (HDPE) bottle / container (with and without trigger
spray)
4.1.1. Use-specific instructions for use
Clean and dry surfaces prior to disinfection.
Application by trigger spraying directly onto the surface: Open the nozzle before use. For optimum results hold
bottle upright and apply from a distance of 10 cm to 20 cm. Ensure complete wetting of the surfaces (18 ml/m2,
corresponding to 20 strokes/m2) followed by wiping with a dry wipe for distribution. Allow to take effect for 5
minutes for bacteria, yeast and enveloped viruses and 15 minutes for fungi. Always close the nozzle after use. Do
not transfer the product to a trigger sprayer, but apply from a package delivered with trigger sprayer.
Application on surfaces by Mopping: Impregnate the clean mop with the liquid using a mop bucket and apply to the
surface to be disinfected. Ensure complete wetting of the surface (18 mL/m2). Allow to take effect for 5 minutes for
bacteria, yeast and enveloped viruses and 15 minutes for fungi. No additional wiping necessary.
Do not mix product with other products. Do not pour any unused product back into the original container.
4.1.2. Use-specific risk mitigation measures
Avoid contact with eyes.
Gloves, eye protection and respiratory protection equipment (RPE) of protection factor of 10 should be worn during
mopping. Unprotected personnel should not be present in the room during disinfection by mopping.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect
the environment
Potential Health Effects
Eyes– Causes serious eye irritation.
Skin– Health injuries are not known or expected under normal use.
Ingestion– Health injuries are not known or expected under normal use.
Inhalation– Inhalation may cause central nervous system effects.
Chronic Exposure- Health injuries are not known or expected under normal use.
First Aid Measures
IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call
a POISON CENTRE or a doctor.
IF ON SKIN:Take off all contaminated clothing and wash it before reuse. Wash skin with water. If skin irritation
occurs: Get medical advice.
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 11/28EN
OJ L, 7.11.2025
IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce
vomiting. Call a POISON CENTRE or a doctor.
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or
a doctor
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use (5.4).
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use (5.5).
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 1
5.1. Instructions for use
Please refer to specific instructions for use for meta-SPC 1
5.2. Risk mitigation measures
Please refer to specific Risk mitigation measures for meta-SPC 1
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the
environment
Please refer to specific information for meta-SPC 1
5.4. Instructions for safe disposal of the product and its packaging
Product
Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in
compliance with local regulations. Dispose of wastes in an approved waste disposal facility.
Contaminated packaging
Dispose of as unused product. Empty containers should be taken to an approved waste handling site for recycling or
disposal. Do not re-use empty containers. Dispose of in accordance with local, regional, national, and/or
international regulations.
Product residues
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Store away from direct sunlight and at temperature between 0°C to 25°C
Shelf life: 24 months
6. OTHER INFORMATION
Safety data sheet and technical sheet available for professional users on request.
AEL acute/medium-term/long-term 17,9 mg/kg body weight (bw)/day for professional workers and AEL acute/
medium-term/long-term 10,7 mg/kg bw/day were used for the risk assessment in the Assessment Report on
Propan-2-ol in PT2 – Germany – (January 2015).
12/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/ojEN
OJ L, 7.11.2025
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) Klercide Market area: EU
70/30 IPA
Klercide Market area: EU
non-sterile
70/30 IPA
Klercide Market area: EU
70/30 IPA
non-sterile
Authorisation number EU-0028425-0001 1-1
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol Active 67-63-0 200-661-7 63,27 % (w/w)
substance
1. META SPC 2 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 2 identifier
Identifier Meta SPC: Meta-SPC 1.2
1.2. Suffix to the authorisation number
Number 1-2
1.3. Product type(s)
Product type(s) PT02: Disinfectants and algaecides not intended for
direct application to humans or animals
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 13/28EN
OJ L, 7.11.2025
2. META SPC 2 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 2
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol Active 67-63-0 200-661-7 60,61 - 65,66 %
substance (w/w)
2.2. Type(s) of formulation of the meta SPC 2
Formulation type(s) XX – Ready to use wipe impregnated with water based
liquid
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2
Hazard statements H225: Highly flammable liquid and vapour.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.
EUH066: Repeated exposure may cause skin dryness or
cracking.
Precautionary statements P210: Keep away from heat, hot surfaces, sparks, open
flames and other ignition sources. No smoking.
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Use # 2.1 – Disinfection of surfaces in cleanroom by wiping
Product type PT02: Disinfectants and algaecides not intended for direct
application to humans or animals
Where relevant, an exact description of the -
authorised use
Target organism(s) (including development Scientific name: no data
stage) Common name: Bacteria
Development stage: no data
Scientific name: no data
Common name: Yeasts
Development stage: no data
Scientific name: no data
Common name: fungi
Development stage: no data
Scientific name: no data
Common name: Enveloped viruses
Development stage: no data
Field(s) of use indoor use
Disinfection of cleanroom hard non-porous surfaces in life sciences
industry by wiping.
14/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/ojEN
OJ L, 7.11.2025
Application method(s) Method: Wiping
Detailed description:
Direct application onto surfaces by wiping with pre-wetted wipes.
Application rate(s) and frequency Application Rate:
c.a. 10 ml/m2
ready to use product
Number and timing of application:
Tub (200 wipes/pack, 230×200, Synthetic/cellulose blend): c.a.
0,13 m2can be disinfected with 1 wipe
Tub (100 wipes/pack, 200×230, Synthetic/cellulose blend): c.a.
0,23 m2can be disinfected with 1 wipe
Mop (10 wipes/pack, 420×250, Polyester/cellulose): c.a. 1,1 m2can
be disinfected with 1 wipe
Pouch (15 wipes/pack, 200×200, Polyester/cellulose): c.a. 0,33 m2
can be disinfected with 1 wipe
Pouch (10 wipes/pack, 200×200, 100% polyester): c.a. 0,51 m2can
be disinfected with 1 wipe
Pouch (15 wipes/pack, 300×300, Polyester/cellulose): c.a. 0,47 m2
can be disinfected with 1 wipe
Pouch (10 wipes/pack, 300×300, 100% polyester): c.a. 0,73 m2can
be disinfected with 1 wipe
Category(ies) of users professional
Pack sizes and packaging material Tub (HDPE) (100-200 wipes/pack, 200×230, Synthetic/cellulose
blend)
Pouch (10-30 wipes/pack, 200×200, Polyester/cellulose, 100%
polyester)
Pouch (10-30 wipes/pack, 300×300, Polyester/cellulose, 100%
polyester)
Mop wipe (10-30 wipes/pack, 420×250, Polyester/cellulose)
4.1.1. Use-specific instructions for use
Clean and dry surfaces prior to disinfection.
Wiping: Wipe surface to be disinfected. Use wipe once. Ensure complete wetting of the surface (10 ml/m2).
About 0,13-1,1 m2can be disinfected with 1 wipe depending on the wipe.
Allow to take effect for 5 minutes for bacteria, yeast and enveloped viruses and 15 minutes for fungi. Dispose of the
wipes in the appropriate closed waste bin immediately after use. No additional wiping necessary.
For multipack wipes, close the package after opening.
Do not mix with other products.
4.1.2. Use-specific risk mitigation measures
-
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect
the environment
Potential Health Effects
Eyes– Causes serious eye irritation.
Skin– Health injuries are not known or expected under normal use.
Ingestion– Health injuries are not known or expected under normal use.
Inhalation– Inhalation may cause central nervous system effects.
Chronic Exposure– Health injuries are not known or expected under normal use.
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 15/28EN
OJ L, 7.11.2025
First Aid Measures
IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call
a POISON CENTRE or a doctor.
IF ON SKIN:Take off all contaminated clothing and wash it before reuse. Wash skin with water. If skin irritation
occurs: Get medical advice.
IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce
vomiting. Call a POISON CENTRE or a doctor.
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or
a doctor
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use (5.4).
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use (5.5).
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 2
5.1. Instructions for use
Please refer to specific instructions for use for meta-SPC 2
5.2. Risk mitigation measures
Please refer to specific risk mitigation measures for meta-SPC 2
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the
environment
Please refer to specific information for meta-SPC 2
5.4. Instructions for safe disposal of the product and its packaging
Product
Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in
compliance with local regulations. Dispose of wastes in an approved waste disposal facility.
Contaminated packaging
Dispose of as unused product. Empty containers should be taken to an approved waste handling site for recycling or
disposal. Do not re-use empty containers. Dispose of in accordance with local, regional, national and/or
international regulations.
Product residues
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Store away from direct sunlight and at temperature between 0°C to 25°C
Shelf life: 24 months
6. OTHER INFORMATION
Safety data sheet and technical sheet available for professional users on request.
16/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/ojEN
OJ L, 7.11.2025
AEL acute/medium-term/long-term 17,9 mg/kg bw/day for professional workers and AEL acute/medium-term/long-
term 10,7 mg/kg bw/day were used for the risk assessment in the Assessment Report of Propan-2-ol in
PT2 Germany – (January 2015).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) Klerwipe Market area: EU
70/30 IPA
Klerwipe Market area: EU
non-sterile
70/30 IPA
Klerwipe Market area: EU
70/30 IPA
non-sterile
Authorisation number EU-0028425-0002 1-2
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol Active 67-63-0 200-661-7 63,27 % (w/w)
substance
1. META SPC 3 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 3 identifier
Identifier Meta SPC: Meta-SPC 1.3
1.2. Suffix to the authorisation number
Number 1-3
1.3. Product type(s)
Product type(s) PT02: Disinfectants and algaecides not intended for
direct application to humans or animals
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 17/28EN
OJ L, 7.11.2025
2. META SPC 3 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 3
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol Active 67-63-0 200-661-7 60,61 - 65,66 %
substance (w/w)
2.2. Type(s) of formulation of the meta SPC 3
Formulation type(s) AE Aerosol dispenser
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3
Hazard statements H222 : Extremely flammable aerosol.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.
H229: Pressurised container: May burst if heated
EUH066: Repeated exposure may cause skin dryness or
cracking.
Precautionary statements P210: Keep away from heat, hot surfaces, sparks, open
flames and other ignition sources. No smoking.
P280: Wear eye protection.
P280: Wear face protection.
P211: Do not spray on an open flame or other ignition
source.
P251: Do not pierce or burn, even after use.
P410+P412: Protect from sunlight. Do no expose to
temperatures exceeding 50°C/ 122°F.
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Use # 3.1 – Disinfection of surfaces in cleanroom by aerosols
Product type PT02: Disinfectants and algaecides not intended for direct
application to humans or animals
Where relevant, an exact description of the -
authorised use
Target organism(s) (including development Scientific name: no data
stage) Common name: Bacteria
Development stage: no data
Scientific name: no data
Common name: Yeasts
Development stage: no data
Scientific name: no data
Common name: fungi
Development stage: no data
18/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/ojEN
OJ L, 7.11.2025
Scientific name: no data
Common name: Enveloped viruses
Development stage: no data
Field(s) of use indoor use
Disinfection of cleanroom hard non-porous surfaces in life sciences
industry.
Application method(s) Method: Aerosol spraying
Detailed description:
Direct application onto surfaces by aerosol spraying followed by
wiping with a dry wipe for distribution.
Application rate(s) and frequency Application Rate:
c.a. 18 ml/m2
ready to use product
Number and timing of application:
As required
Category(ies) of users professional
Pack sizes and packaging material 0,2 liter – 0,5 liter aluminium can
4.1.1. Use-specific instructions for use
Clean and dry surfaces prior to disinfection.
Application by aerosol spraying: For optimum results hold can upright and apply from a distance of 10 cm to
20 cm. Ensure complete wetting of the surfaces (18 ml/m2, corresponding to 7,2 seconds/m2spraying) followed by
wiping with a dry wipe for distribution. Allow to take effect for 5 minutes for bacteria, yeast and enveloped viruses
and 15 minutes for fungi.
Do not mix product with other products.
4.1.2. Use-specific risk mitigation measures
Avoid contact with eyes.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect
the environment
Potential Health Effects
Eyes– Causes serious eye irritation.
Skin– Health injuries are not known or expected under normal use.
Ingestion– Health injuries are not known or expected under normal use.
Inhalation– Inhalation may cause central nervous system effects. Intentional misuse by deliberate inhalation may be
harmful or fatal.
Chronic Exposure– Health injuries are not known or expected under normal use.
First Aid Measures
IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call
a POISON CENTRE or a doctor.
IF ON SKIN:Take off all contaminated clothing and wash it before reuse. Wash skin with water. If skin irritation
occurs: Get medical advice.
IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce
vomiting. Call a POISON CENTRE or a doctor.
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or
a doctor
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 19/28EN
OJ L, 7.11.2025
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use (5.4).
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use (5.5).
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 3
5.1. Instructions for use
Please refer to specific instructions of use for meta-SPC 3
5.2. Risk mitigation measures
Please refer to specific risk mitigation measures for meta-SPC 3
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the
environment
Please refer to specific information for meta-SPC 3
5.4. Instructions for safe disposal of the product and its packaging
Product
Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in
compliance with local regulations. Dispose of wastes in an approved waste disposal facility.
Contaminated packaging
Dispose of as unused product. Empty containers should be taken to an approved waste handling site for recycling or
disposal. Do not re-use empty containers. Dispose of in accordance with local, regional, national and/or
international regulations.
Product residues
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Store away from direct sunlight and at temperature between 0°C to 25°C
Shelf life: 24 months
6. OTHER INFORMATION
Safety data sheet and technical sheet available for professional users on request.
AEL acute/medium-term/long-term 17,9 mg/kg bw/day for professional workers and AEL acute/medium-term/long-
term 10,7 mg/kg bw/day were used for the risk assessment in the Assessment Report of Propan-2-ol in PT2 –
Germany – (January 2015).
20/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/ojEN
OJ L, 7.11.2025
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) Klercide Market area: EU
70/30 IPA
Aerosol
Authorisation number EU-0028425-0003 1-3
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol Active 67-63-0 200-661-7 63,269 % (w/w)
substance
1. META SPC 4 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 4 identifier
Identifier Meta SPC: Meta-SPC 1.4
1.2. Suffix to the authorisation number
Number 1-4
1.3. Product type(s)
Product type(s) PT02: Disinfectants and algaecides not intended for
direct application to humans or animals
PT04: Food and feed area
2. META SPC 4 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 4
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol Active 67-63-0 200-661-7 30,3 - 30,3 % (w/
substance w)
2.2. Type(s) of formulation of the meta SPC 4
Formulation type(s) XX - Ready to use wipe impregnated with water based
liquid
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 21/28EN
OJ L, 7.11.2025
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4
Hazard statements H226: Flammable liquid and vapour.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.
EUH066: Repeated exposure may cause skin dryness or
cracking.
Precautionary statements P210: Keep away from heat, hot surfaces, sparks, open
flames and other ignition sources. No smoking.
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Use # 4.1 – Disinfection of non-food and food contact surfaces by pre-wetted wipes
Product type PT02: Disinfectants and algaecides not intended for direct
application to humans or animals
PT04: Food and feed area
Where relevant, an exact description of the -
authorised use
Target organism(s) (including development Scientific name: no data
stage) Common name: Bacteria
Development stage: no data
Scientific name: no data
Common name: Yeasts
Development stage: no data
Field(s) of use indoor use
Disinfection of food contact and non-food contact hard non-porous
surfaces in: Commercial kitchens, Catering, Food processing and
Food Retail, Canteen, Bathrooms and Restrooms in hotels,
restaurants, stores, schools, offices.
Application method(s) Method: Wiping
Detailed description:
Direct application onto hard non-porous surfaces by wiping.
Application rate(s) and frequency Application Rate:
c.a. 10 ml/m2at room temperature
ready to use product
Number and timing of application:
Wiping with two superposed wipes.
About 0,074-0,222 m2can be disinfected with two superposed
wipes depending on the size of wipe used.
Category(ies) of users professional
Pack sizes and packaging material Container (PP) (100 wipes 130×210)
Container (HDPE) (150 wipes 180×300)
Bucket (PP) (1500 wipes 150×210)
Pouch (PET/PE) (200 wipes 130×210)
Wipe material (all packagings): blend of Pulp, Polyester, Binder
22/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/ojEN
OJ L, 7.11.2025
4.1.1. Use-specific instructions for use
Wiping: Clean and dry surfaces prior to disinfection.
Wipe surface to be disinfected with two superposed wipes. Use the wipes once. For optimum results ensure complete
wetting of the surface (10 ml/m2), about 0,074-0,222 m2can be disinfected with two superposed wipes depending
on the size of wipe used. Allow to take effect for 15 minutes for bacteria and yeast. Dispose the wipes in the
appropriate closed waste bin immediately after use. No additional wiping necessary.
For multipack wipes, close the package after opening.
Do not mix product with other products.
4.1.2. Use-specific risk mitigation measures
-
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect
the environment
Potential Health Effects
Eyes– Causes serious eye irritation.
Skin– Health injuries are not known or expected under normal use.
Ingestion– Health injuries are not known or expected under normal use.
Inhalation– Inhalation may cause central nervous system effects.
Chronic Exposure– Health injuries are not known or expected under normal use.
First Aid Measures
IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call
a POISON CENTRE or a doctor.
IF ON SKIN:Take off all contaminated clothing and wash it before reuse. Wash skin with water. If skin irritation
occurs: Get medical advice.
IF SWALLOWED : Rinse mouth. Give something to drink, if exposed person isable to swallow. Do NOT induce
vomiting. Call a POISON CENTRE or a doctor.
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or
a doctor.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use (5.4).
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use (5.5).
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 4
5.1. Instructions for use
Please refer to specific instructions of use for meta-SPC 4
5.2. Risk mitigation measures
Please refer to specific risk mitigation measures for meta-SPC 4
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the
environment
Please refer to specific information for meta-SPC 4
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 23/28EN
OJ L, 7.11.2025
5.4. Instructions for safe disposal of the product and its packaging
Product
Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in
compliance with local regulations. Dispose of wastes in an approved waste disposal facility.
Contaminated packaging
Dispose of as unused product. Empty containers should be taken to an approved waste handling site for recycling or
disposal. Do not re-use empty containers. Dispose of in accordance with local, regional, national and/or
international regulations.
Product residues
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Store away from direct sunlight and at temperature between 0°C to 25°C
Shelf life: 24 months
6. OTHER INFORMATION
Safety data sheet and technical sheet available for professional users on request.
AEL acute/medium-term/long-term 17,9 mg/kg bw/day for professional workers and AEL acute/medium-term/long-
term 10,7 mg/kg bw/day were used for the risk assessment in the Assessment Report of Propan-2-ol in PT2 –
Germany – (January 2015).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) Eco-Bac Market area: EU
Wipes
Sirafan Bac Market area: EU
Wipes
Authorisation number EU-0028425-0004 1-4
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol Active 67-63-0 200-661-7 30,3 % (w/w)
substance
24/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/ojEN
OJ L, 7.11.2025
1. META SPC 5 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 5 identifier
Identifier Meta SPC: Meta-SPC 1.5
1.2. Suffix to the authorisation number
Number 1-5
1.3. Product type(s)
Product type(s) PT02: Disinfectants and algaecides not intended for
direct application to humans or animals
PT04: Food and feed area
2. META SPC 5 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 5
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol Active 67-63-0 200-661-7 30,3 - 30,3 % (w/
substance w)
2.2. Type(s) of formulation of the meta SPC 5
Formulation type(s) AL Any other liquid
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 5
Hazard statements H226: Flammable liquid and vapour.
H319: Causes serious eye irritation.
H336: May cause drowsiness or dizziness.
EUH066: Repeated exposure may cause skin dryness or
cracking.
Precautionary statements P210: Keep away from heat, hot surfaces, sparks, open
flames and other ignition sources. No smoking.
P280: Wear eye protection.
P280: Wear face protection.
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 25/28EN
OJ L, 7.11.2025
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description
Table 1
Use # 5.1 – Disinfection of non-food and food contact surfaces by trigger spray
Product type PT02: Disinfectants and algaecides not intended for direct
application to humans or animals
PT04: Food and feed area
Where relevant, an exact description of the -
authorised use
Target organism(s) (including development Scientific name: no data
stage) Common name: Bacteria
Development stage: no data
Scientific name: no data
Common name: Yeasts
Development stage: no data
Field(s) of use indoor use
Disinfection of food contact and non-food contact hard non-porous
surfaces in: Commercial kitchens, Catering, Food processing and
Food Retail, Canteen, Bathrooms and Restrooms in hotels,
restaurants, stores, schools, offices.
Application method(s) Method: Trigger spraying
Detailed description:
Direct application onto hard non-porous surfaces by trigger
spraying.
Application rate(s) and frequency Application Rate:
c.a. 18 ml/m2at room temperature
ready to use product
Number and timing of application:
As required
Category(ies) of users professional
Pack sizes and packaging material 0,5 liter – 10 liter HDPE container (with trigger spray)
4.1.1. Use-specific instructions for use
Application by trigger spraying: Open the nozzle before use. For optimum results hold bottle upright and apply
from a distance of 10 cm to 20 cm. Ensure complete wetting of the surfaces (18 ml/m2, corresponding to 29
strokes/m2). Allow to take effect for 30 seconds for bacteria and yeast. Always close the nozzle after use.
Do not mix product with other products. Do not pour any unused product back into the original container.
4.1.2. Use-specific risk mitigation measures
Avoid contact with eyes.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect
the environment
Potential Health Effects
Eyes– Causes serious eye irritation.
Skin– Health injuries are not known or expected under normal use.
26/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/ojEN
OJ L, 7.11.2025
Ingestion– Health injuries are not known or expected under normal use.
Inhalation– Inhalation may cause central nervous system effects.
Chronic Exposure– Health injuries are not known or expected under normal use.
First Aid Measures
IF IN EYES: Rinse with water. Remove contact lenses, if present and easy to do. Continue rinsing for 5 minutes. Call
a POISON CENTRE or a doctor.
IF ON SKIN:Take off all contaminated clothing and wash it before reuse. Wash skin with water. If skin irritation
occurs: Get medical advice.
IF SWALLOWED: Rinse mouth. Give something to drink, if exposed person is able to swallow. Do NOT induce
vomiting. Call a POISON CENTRE or a doctor.
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTRE or
a doctor
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging
See general directions for use (5.4).
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage
See general directions for use (5.5).
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 5
5.1. Instructions for use
Please refer to specific instructions of use for meta-SPC 5
5.2. Risk mitigation measures
Please refer to specific risk mitigation measures for meta-SPC 5
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the
environment
Please refer to specific information for meta-SPC 5
5.4. Instructions for safe disposal of the product and its packaging
Product
Where possible recycling is preferred to disposal or incineration. If recycling is not practicable, dispose of in
compliance with local regulations. Dispose of wastes in an approved waste disposal facility.
Contaminated packaging
Dispose of as unused product. Empty containers should be taken to an approved waste handling site for recycling or
disposal. Do not re-use empty containers. Dispose of in accordance with local, regional, national and/or
international regulations.
Product residues
Do not discharge unused product on the ground, into water courses, into pipes (sink, toilets…) nor down the drains.
Dispose of unused product, its packaging and all other waste, in accordance with local regulations.
ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj 27/28EN
OJ L, 7.11.2025
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage
Store away from direct sunlight and at temperature between 0°C to 25°C
Shelf life: 24 months
6. OTHER INFORMATION
Safety data sheet and technical sheet available for professional users on request.
AEL acute/medium-term/long-term 17,9 mg/kg bw/day for professional workers and AEL acute/medium-term/long-
term 10,7 mg/kg bw/day were used for the risk assessment in the Assessment Report of Propan-2-ol in PT2 –
Germany – (January 2015).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 5
7.1. Trade name(s), authorisation number and specific composition of each individual product
Trade name(s) Sirafan Market area: EU
Speed-FR
Authorisation number EU-0028425-0005 1-5
Common name IUPAC name Function CAS number EC number Content (%)
Propan-2-ol Active 67-63-0 200-661-7 30,3 % (w/w)
substance
28/28 ELI: http://data.europa.eu/eli/reg_impl/2025/2221/oj