See Full Document Text
Official Journal EN
of the European Union L series
2025/2392 1.12.2025
COMMISSION IMPLEMENTING REGULATION(EU) 2025/2392
of 28 November 2025
on the technical description of the categories of important and critical products with digital
elements pursuant to Regulation (EU) 2024/2847 of the European Parliament and of the Council
(Text with EEA relevance)
THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Regulation (EU) 2024/2847 of the European Parliament and of the Council of 23 October 2024 on
horizontal cybersecurity requirements for products with digital elements and amending Regulations (EU) No 168/2013
and (EU) 2019/1020 and Directive (EU) 2020/1828 (Cyber Resilience Act)(1), and in particular Article 7(4) thereof,
Whereas:
(1) Regulation (EU) 2024/2847 lays down rules on the cybersecurity of products with digital elements. In particular,
Annex III to that Regulation sets out categories of important products with digital elements that, when placed on the
market, are subject to conformity assessment procedures that are stricter than those applicable to other products with
digital elements. Annex IV to Regulation (EU) 2024/2847 sets out categories of critical products with digital elements
for which manufacturers could be required to obtain a European cybersecurity certificate under a European
cybersecurity certification scheme pursuant to Regulation (EU) 2019/881 of the European Parliament and of the
Council(2)or which would be subject to mandatory third-party conformity assessment, when placed on the market.
(2) Pursuant to Article 7(1) and Article 8(1) of Regulation (EU) 2024/2847, the core functionality of a product with
digital elements determines whether that product with digital elements meets the technical description of a category
of important or critical products with digital elements and therefore the applicable conformity assessment
procedures.
(3) When developing a product with digital elements, and in order to achieve their desired set of functionalities,
manufacturers typically integrate into their own products with digital elements other components which are also
products with digital elements and that can meet the technical description of a category of important or critical
products. Pursuant to Regulation (EU) 2024/2847, a product with digital elements is subject to the conformity
assessment procedures applicable to important or critical products with digital elements, if that product as a whole
is an important or critical product as set out in Annexes III and IV to that Regulation. For example, integrating an
embedded browser as a component of a news app for use in smartphones does not in itself render the news app
subject to the conformity assessment procedure applicable to products with digital elements that have the core
functionality of ‘standalone and embedded browsers’. Nonetheless, in accordance with Regulation (EU) 2024/2847,
the manufacturer needs to ensure that the product with digital elements as a whole meets the essential cybersecurity
requirements. Therefore, the manufacturer needs to evaluate the security of the whole product, considering, as
appropriate, the security of the components or functionalities that are integrated into it. For example, in order for
the manufacturer of a news app to demonstrate that its product with digital elements is in conformity with
Regulation (EU) 2024/2847, that manufacturer is to demonstrate that the news app as a whole satisfies the
applicable requirements, considering, as appropriate, the security of the embedded browser that is integrated into
its app.
(1) OJ L, 2024/2847, 20.11.2024, ELI: http://data.europa.eu/eli/reg/2024/2847/oj.
(2) Regulation (EU) 2019/881 of the European Parliament and of the Council of 17 April 2019 on ENISA (the European Union Agency
for Cybersecurity) and on information and communications technology cybersecurity certification and repealing Regulation (EU)
No 526/2013 (Cybersecurity Act) (OJ L 151, 7.6.2019, p. 15, ELI: http://data.europa.eu/eli/reg/2019/881/oj).
ELI: http://data.europa.eu/eli/reg_impl/2025/2392/oj 1/11EN
OJ L, 1.12.2025
(4) The fact that a product with digital elements performs functions other than or additional to those detailed in the
technical descriptions set out in this Regulation does not in itself mean that the product with digital elements does
not have the core functionality of a product category set out in Annexes III and IV to Regulation (EU) 2024/2847.
For example, products with digital elements that have the core functionality of ‘operating systems’ often include
software that performs ancillary functions not included in the technical description of that product category, such as
calculators or simple graphics editors. Products with digital elements often also incorporate components that have
the functionality of another important or critical product with digital elements, such as an operating system
integrating browser functionality, or a router integrating firewall functionality. This, however, does not in itself mean
that such products with digital elements do not have the core functionality of ‘operating systems’ or ‘routers, modems
intended for the connection to the internet, and switches’, respectively.
(5) On the other hand, a product with digital elements that has the ability to perform the functions of a product category
set out in Annexes III and IV to Regulation (EU) 2024/2847 but whose core functionality itself is different from that
of such product category is not to be considered to meet the technical description of that product category. For
example, a security orchestration, automation and response (SOAR) software often has the ability to perform the
functions of products with digital elements in the category of ‘security information and event management (SIEM)
systems’, i.e. gather data, analyse it and present it as actionable information for security purposes. However, as its
core functionality is not that of a SIEM, SOAR software are generally not to be considered to meet the technical
description of ‘security information and event management (SIEM) systems’. Similarly, a smartphone typically
integrates components that perform the functions of several product categories set out in Annexes III and IV to
Regulation (EU) 2024/2847, such as an operating system or an integrated password manager. However, as a
smartphone’s core functionality is not that of an operating system or of a password manager, it is generally not to be
considered to meet the technical description of such product categories.
(6) Pursuant to Article 13(2) and (3) of Regulation (EU) 2024/2847, manufacturers of products with digital elements are
to implement the essential cybersecurity requirements set out in Part I of Annex I to Regulation (EU) 2024/2847 in a
way that is proportionate to the risks of the product with digital elements, based on the intended purpose and
reasonably foreseeable use as well as the conditions of use of the product with digital elements, taking into account
the length of time the product is expected to be in use. In accordance with Article 13(2) and (3) of that Regulation,
and irrespective of whether the product with digital elements is considered to be an important or critical product
with digital elements, manufacturers are to carry out a comprehensive cybersecurity risk assessment and indicate
how the essential cybersecurity requirements are implemented as informed by the risk assessment, including their
testing and assurance. Where the core functionality of their product with digital elements meets the technical
description of an important or critical product with digital elements, manufacturers are to demonstrate conformity
following the specific conformity assessment procedures established by Article 32(2), (3), (4) and (5) of Regulation
(EU) 2024/2847.
(7) This Regulation includes examples of products with digital elements whose core functionality meets the technical
description of certain important or critical products with digital elements. Such examples are provided for
illustrative purposes only and are not an exhaustive list.
(8) In order to provide legal certainty to manufacturers, the categories of products with digital elements that are tamper-
resistant microprocessors, tamper-resistant microcontrollers, and smartcards and similar devices, including secure
elements, should be distinguished on the basis of the level of resistance against potential exploitability of flaws or
weaknesses for which they have been designed. AVA_VAN level is an extensively used and standardised way to
express such a level of resistance. AVA_VAN levels are set out in the publicly available Common Criteria and
Common Evaluation Methodology standards, which underlie existing certification frameworks widely adopted on
the market, such as Commission Implementing Regulation (EU) 2024/482(3). Implementing Regulation
(3) Commission Implementing Regulation (EU) 2024/482 of 31 January 2024 laying down rules for the application of Regulation
(EU) 2019/881 of the European Parliament and of the Council as regards the adoption of the European Common Criteria-based
cybersecurity certification scheme (EUCC) (OJ L, 2024/482, 7.2.2024, ELI: http://data.europa.eu/eli/reg_impl/2024/482/oj).
2/11 ELI: http://data.europa.eu/eli/reg_impl/2025/2392/ojEN
OJ L, 1.12.2025
(EU) 2024/482 establishes a European cybersecurity certification scheme that can be used to certify a product at a
specific assurance level. Drawing on global practices, Implementing Regulation (EU) 2024/482 foresees the
possibility to issue certificates based on older versions of the standards until end of 2027. Hence, in the context of
Regulation (EU) 2024/2847, it is appropriate to allow for AVA_VAN levels to be expressed by referring to either the
latest version or older versions of those standards.
(9) The measures provided for in this Regulation are in accordance with the opinion of the Committee established by
Article 62(1) of Regulation (EU) 2024/2847,
HAS ADOPTED THIS REGULATION:
Article 1
Definitions
For the purposes of this Regulation, the following definitions shall apply:
(1) ‘Common Criteria’ means the Common Criteria for Information Technology Security Evaluation as defined in
Article 2(1) of Implementing Regulation (EU) 2024/482 or as set out in the standards referred to in Article 3(2),
points (a) and (b), of that Implementing Regulation;
(2) ‘Common Evaluation Methodology’ means the Common Methodology for Information Technology Security
Evaluation as defined in Article 2(2) of Implementing Regulation (EU) 2024/482 or as set out in the standards
referred to in Article 3(2), points (c) and (d), of that Implementing Regulation.
Article 2
1. The technical description of the categories of products with digital elements under classes I and II listed in Annex III
to Regulation (EU) 2024/2847 shall be as set out in Annex I to this Regulation.
2. The technical description of the categories of products with digital elements listed in Annex IV to Regulation
(EU) 2024/2847 shall be as set out in the Annex II to this Regulation.
Article 3
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the
European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 28 November 2025.
For the Commission
The President
Ursula VON DER LEYEN
ELI: http://data.europa.eu/eli/reg_impl/2025/2392/oj 3/11ANNEX I
IMPORTANT PRODUCTS WITH DIGITAL ELEMENTS
Class I
Category of product Technical description
1. Identity management systems and privileged access Identity management systems are products with digital elements that provide mechanisms for authentication or
management software and hardware, including authentication authorisation and that may also provide mechanisms for the lifecycle management of identity credentials of natural
and access control readers, including biometric readers persons, legal persons, devices or systems, such as identity registration, provisioning, maintenance, deregistration.
These systems include access management systems that control access of natural persons, legal persons, devices or
systems to digital resources or physical locations.
Privileged access management software is an access management system that controls and monitors access rights to IT
or OT systems and sensitive information within an organisation, including systems enforcing differentiated access
control policies for privileged users.
This category includes but is not limited to authentication and access control readers, biometric readers, single sign-on
software, federated identity management software, one-time password software, hardware authentication devices such
as transaction authentication number (TAN) generators, authentication software and multi-factor authentication
software.
2. Standalone and embedded browsers Software products with digital elements that enable end users to access, render, and interact with web content and
services hosted on servers that are connected to networks such as the Internet. They typically include a browser
engine for interpreting and displaying content written in markup language (e.g. HTML), support for web protocols
(e.g. HTTP, HTTPS), the ability to execute scripts and manage user inputs as well as storage of temporary or persistent
data from websites (cookies).
This category includes but is not limited to standalone applications that fulfil the functions of browsers, embedded
browsers intended for integration into another system or application as well as browsers with AI agent integration.
3. Password managers Products with digital elements that store passwords, locally on a device or on a remote server, including activities such
as generation of passwords as well as password sharing and integration with local or third-party applications for usage
of passwords.
This category includes but is not limited to local password managers, password managers provided as browser
extensions, enterprise password managers as well as hardware-based password managers.
4/11
ELI:
http://data.europa.eu/eli/reg_impl/2025/2392/oj
EN
OJ
L,
1.12.2025Category of product Technical description
4. Software that searches for, removes, or quarantines malicious Software products with digital elements, typically referred to as antivirus or antimalware, that detect or search for
software malicious software or code on devices, or remove or quarantine such software or code, in order to maintain the
integrity, confidentiality, or availability of such devices.
In the context of this category of products, malicious software means software containing malicious features or
capabilities that can cause harm directly or indirectly to the user and/or the computer system, such as viruses, worms,
ransomware, spyware and trojans.
This category includes but is not limited to software that detects or searches for malicious software in real-time or
manually, rootkit detection and rescue disks with the core functionality of searching, removing or quarantining
malicious software.
5. Products with digital elements with the function of virtual Products with digital elements that establish an encrypted logical tunnel that is constructed from the system resources
private network (VPN) of a physical or virtual network.
This category includes but is not limited to virtual private network clients, virtual private network servers and virtual
private network gateways.
6. Network management systems Products with digital elements that manage connected network elements, such as servers, routers, switches,
workstations, printers or mobile devices, by monitoring them and controlling their network operations and
configuration.
This category includes but is not limited to end-to-end management systems and dedicated configuration
management systems, such as controllers for software-defined networking.
7. Security information and event management (SIEM) systems Products with digital elements that collect data from multiple sources, analyse and correlate that data and present it as
actionable information for security-related purposes, such as threat and incident detection, forensic analysis or
compliance purposes.
8. Boot managers Software products with digital elements that manage the process of initial system startup after power on/restart by
initialising hardware, loading or transferring control to the operating system environment or system resources, and
selecting boot options.
This category includes but is not limited to UEFI firmware, single-stage and multi-stage boot loaders.
9. Public key infrastructure and digital certificate issuance Products with digital elements used as part of a public key infrastructure (PKI) that manage the validation, creation,
software issuance, distribution, status publication, renewal or revocation of digital certificates, or the generation, storage,
escrow, exchange, destruction or rotation of cryptographic keys associated with such digital certificates.
This category includes but is not limited to key management systems, digital certificate management systems, online
certificate status protocol responders and all-in-one PKI solutions.
ELI:
http://data.europa.eu/eli/reg_impl/2025/2392/oj
5/11
OJ
L,
1.12.2025
ENCategory of product Technical description
10. Physical and virtual network interfaces Physical network interfaces are products with digital elements that directly connect a device to a network via an
application programming interface (API) provided by the interface drivers, typically operating at the data link layer,
and that feature hardware adapters to transmission media with corresponding firmware, typically operating at the
physical and data link layer.
Virtual network interfaces are products with digital elements that directly or indirectly connect a device to a network
via an API that emulates that of drivers of physical network interfaces, typically operating at the data link layer.
This category includes but is not limited to wired and wireless network interface cards, controllers and adapters, such
as for Wi-Fi, Ethernet, IrDA, USB, Bluetooth, NearLink, Zigbee, or Fieldbus, as well as purely virtual standalone
products, such as virtual network interface cards, container network interfaces and VPN interfaces.
11. Operating systems Software products with digital elements that provide an abstract interface of the underlying hardware and control the
execution of software, and that may provide services such as computing resource management and configuration,
scheduling, input-output control, managing data, and providing an interface through which applications interact with
system resources and peripherals.
This category includes but is not limited to real-time operating systems, general-purpose and special-purpose
operating systems.
12. Routers, modems intended for the connection to the internet, Routers are products with digital elements that establish and control the flow of data between different networks by
and switches selecting paths or routes using routing protocol mechanisms and algorithms, typically operating at the network layer.
This category includes but is not limited to wired and wireless routers, virtual routers and routers with or without
modems.
Modems intended for the connection to the Internet are hardware products with digital elements that use digital
modulation and demodulation techniques to convert analogue signals from and to digital signals for IP-based
communication.
This category includes but is not limited to fibre modems, Digital Subscriber Line (DSL) modems, cable (DOCSIS)
modems, satellite modems and cellular modems.
Switches are products with digital elements that provide connectivity between networked devices through packet
forwarding mechanisms and that have a management plane, typically implemented at the data link or network layer.
This category includes but is not limited to managed switches, smart switches, multilayer switches, virtual security
switches, programmable switches for software-defined networking and bridges such as wireless access points.
6/11
ELI:
http://data.europa.eu/eli/reg_impl/2025/2392/oj
EN
OJ
L,
1.12.2025Category of product Technical description
13. Microprocessors with security-related functionalities Products with digital elements that are integrated circuits that carry out central processing functions relying on
external memory and peripherals, including microcode and other low-level firmware. They additionally provide
security-related functionalities, such as encryption, authentication, secure key storage, random number generation,
trusted execution environment, or other hardware-based protection mechanisms, that aim to secure other products,
networks or services beyond the microprocessor itself, such as secure boot chain, virtualization or secure
communication interfaces.
14. Microcontrollers with security-related functionalities Products with digital elements that are integrated circuits that carry out central processing functions integrating
memory allowing the microcontroller to be programmable and typically also other peripherals, including microcode
and other low-level firmware. They additionally provide security-related functionalities, such as encryption,
authentication, secure key storage, random number generation, trusted execution environment, or other hardware-
based protection mechanisms, that aim to secure other products, networks or services beyond the microcontroller
itself, such as secure boot chain, virtualization or secure communication interfaces.
15. Application specific integrated circuits (ASIC) and field- Application specific integrated circuits (ASIC) with security-related functionalities are products with digital elements
programmable gate arrays (FPGA) with security-related that are integrated circuits, fully or partially custom-designed to perform a specific function or implement a specific
functionalities application, including microcode and other low-level firmware. They additionally provide security-related
functionalities, such as encryption, authentication, secure key storage, random number generation, trusted execution
environment, or other hardware-based protection mechanisms, that aim to secure other products, networks or
services beyond the ASIC itself, such as secure boot chain, virtualization or secure communication interfaces.
Field-programmable gate arrays (FPGA) with security-related functionalities are products with digital elements that are
integrated circuits characterized by a matrix of configurable logic blocks designed to be reprogrammable after
manufacturing to perform a specific function or implement a specific application, including microcode and other
low-level firmware. They additionally provide security-related functionalities, such as encryption, authentication,
secure key storage, random number generation, trusted execution environment, or other hardware-based protection
mechanisms, that aim to secure other products, networks or services beyond the FPGA itself, such as secure boot
chain, virtualization or secure communication interfaces.
16. Smart home general purpose virtual assistants Products with digital elements that communicate on the public Internet, whether directly or via other equipment, that
process demands, tasks or questions based on natural language prompts, such as through audio or written input, and
that, based on those demands, tasks or questions, provide access to other services or control the functions of
connected devices in residential settings.
This category includes but is not limited to smart speakers with an integrated virtual assistant, and standalone virtual
assistants that meet this description.
ELI:
http://data.europa.eu/eli/reg_impl/2025/2392/oj
7/11
OJ
L,
1.12.2025
ENCategory of product Technical description
17. Smart home products with security functionalities, including Products with digital elements that protect the physical security of consumers in a residential setting and which can be
smart door locks, security cameras, baby monitoring systems controlled or managed remotely from other systems, as well as hardware and software that centrally control such
and alarm systems products.
This category includes but is not limited to smart door locking devices, baby monitoring systems, alarm systems and
home security cameras.
18. Internet connected toys covered by Directive 2009/48/EC of Internet connected toys that have social interactive features are products with digital elements that are covered by
the European Parliament and of the Council(1)that have social Directive 2009/48/EC, that communicate on the public Internet, whether directly or via any other equipment, and
interactive features (e.g. speaking or filming) or that have that have embedded technologies that enable inbound and outbound communication, such as keyboard, microphone,
location tracking features speaker or camera.
Internet connected toys that have location tracking features are products with digital elements that are covered by
Directive 2009/48/EC, that communicate on the public Internet, whether directly or via any other equipment, and
that have technologies that enable tracking or inferring of the geographical location of the toy or its user. Where the
toy merely detects the proximity of the user or of other toys by using sensing technologies, the toy is not to be
considered to have location tracking features.
19. Personal wearable products to be worn or placed on a human Personal wearable products to be worn or placed on a human body that have a health monitoring purpose are
body that have a health monitoring (such as tracking) purpose products with digital elements that are worn on the body directly or via clothing or accessories and that can, regularly
and to which Regulation (EU) 2017/745(2)or (EU) 2017/746 or continuously, sense and further process information, including body metrics, relevant to the user’s health,
of the European Parliament and of the Council(3)do not apply, excluding products that fall within the scope of Regulation (EU) 2017/745 or of Regulation (EU) 2017/746.
or personal wearable products that are intended for the use by
This category includes but is not limited to fitness trackers, smartwatches, smart jewellery, smart clothing and sports
and for children
apparel that meet this description.
Personal wearable products that are intended for the use by and for children are products with digital elements which
can be worn or placed on the body, directly or via clothing or accessories, of individuals under the age of 14.
This category includes but is not limited to child safety wearables.
8/11
ELI:
http://data.europa.eu/eli/reg_impl/2025/2392/oj
EN
OJ
L,
1.12.2025
(1) Directive 2009/48/EC of the European Parliament and of the Council of 18 June 2009 on the safety of toys (OJ L 170, 30.6.2009, p. 1, ELI: http://data.europa.eu/eli/dir/2009/48/oj).
(2) Regulation (EU) 2017/745 of the European Parliament and of the Council of 5 April 2017 on medical devices, amending Directive 2001/83/EC, Regulation (EC) No 178/2002 and Regulation (EC)
No 1223/2009 and repealing Council Directives 90/385/EEC and 93/42/EEC (OJ L 117, 5.5.2017, p. 1, ELI: http://data.europa.eu/eli/reg/2017/745/oj).
(3) Regulation (EU) 2017/746 of the European Parliament and of the Council of 5 April 2017 on in vitrodiagnostic medical devices and repealing Directive 98/79/EC and Commission Decision 2010/227/EU
(OJ L 117, 5.5.2017, p. 176, ELI: http://data.europa.eu/eli/reg/2017/746/oj).Class II
Category of product Technical description
1. Hypervisors and container runtime systems that support Hypervisors are software products with digital elements that abstract and/or allocate computing resources and enable
virtualised execution of operating systems and similar the execution, management and orchestration of virtual machines that are logically separated from each other and/or
environments from the physical hardware. Hypervisors may run directly on hardware (bare metal), on top of an operating system, or
within another virtual machine (nested virtualisation).
In the context of this category of products, a virtual machine is a software-defined logical separation of a computing
environment, which includes a virtualised set of hardware resources (e.g. CPU, memory, storage, network interfaces)
and typically hosts its own operating system.
This category includes but is not limited to type 1 hypervisors (bare metal), type 2 hypervisors (hosted on an
operating system) and hybrid hypervisors.
Container runtime systems are software products with digital elements that manage the execution and lifecycle of
containers running on a single host operating system as isolated processes, allocating resources and allowing the
management and orchestration of individual containers.
In the context of this category of products, a container is a software-based execution environment that encapsulates
one or more software components and their dependencies in a single package, enabling it to run independently and
consistently.
2. Firewalls, intrusion detection and prevention systems Firewalls are products with digital elements that protect a connected network or system from unauthorized access by
monitoring and restricting data communication traffic to and from that network.
This category includes but is not limited to network firewalls and application firewalls such as web application
firewalls or filters and anti-spam gateways.
Intrusion detection systems are products with digital elements that monitor traffic once it has entered the network
environment for suspicious activity and detect or identify that an intrusion has been attempted, is occurring, or has
occurred on a connected network or system.
This category includes but is not limited to network-based intrusion detection systems and host-based intrusion
detection systems.
Intrusion prevention systems are products with digital elements composed of an intrusion detection system that
actively responds to an intrusion to a connected network or system.
This category includes but is not limited to network-based intrusion prevention systems and host-based intrusion
prevention systems.
ELI:
http://data.europa.eu/eli/reg_impl/2025/2392/oj
9/11
OJ
L,
1.12.2025
ENCategory of product Technical description
3. Tamper-resistant microprocessors Products with digital elements that are microprocessors with security-related functionalities referred to in Table ‘Class
I’, point 13, of this Annex, including tamper evidence, resistance or response, and which additionally are designed to
provide protection of AVA_VAN level 2 or 3, as set out in the Common Criteria and the Common Evaluation
Methodology.
4. Tamper-resistant microcontrollers Products with digital elements that are microcontrollers with security-related functionalities referred to in Table ‘Class
I’, point 14, of this Annex, including tamper evidence, resistance or response, and which additionally are designed to
provide protection of AVA_VAN level 2 or 3, as set out in the Common Criteria and the Common Evaluation
Methodology.
10/11
ELI:
http://data.europa.eu/eli/reg_impl/2025/2392/oj
EN
OJ
L,
1.12.2025ANNEX II
CRITICAL PRODUCTS WITH DIGITAL ELEMENTS
Category of product Technical description
1. Hardware Devices with Security Boxes Hardware products with digital elements that securely store, process, or manage sensitive data or perform
cryptographic operations, and that consist of multiple discrete components, incorporating a hardware physical
envelope providing tamper evidence, resistance or response as countermeasures against physical attacks.
This category includes but is not limited to physical payment terminals, hardware security modules that generate and
manage cryptographic elements, and tachographs that meet the above description.
2. Smart meter gateways within smart metering systems as Smart meter gateways are products with digital elements that control communication between components in or
defined in Article 2(23) of Directive (EU) 2019/944 of the connected to smart metering systems as defined in Article 2(23) of Directive (EU) 2019/944, and authorised third
European Parliament and of the Council(1)and other devices parties, such as utility providers. Smart meter gateways collect, process and store meter or personal data, protect data
for advanced security purposes, including for secure and information flows by supporting specific cryptographic needs, such as encryption and decryption of data,
cryptoprocessing incorporate firewalling functionalities and provide the means to control other devices.
This category includes but is not limited to smart meter gateways related to smart metering systems measuring
electricity as defined in Article 2(23) of Directive (EU) 2019/944. It may also include smart meter gateways used in
other smart metering systems measuring consumption of other sources of energy such as gas or heat, provided that
the gateway meets this description.
3. Smartcards or similar devices, including secure elements Secure elements are microcontrollers or microprocessors with security-related functionalities, including tamper
evidence, resistance or response. They typically store, process, or manage cryptographic operations or sensitive data,
such as identity credentials or payment credentials. Secure elements are designed to provide protection of at least
AVA_VAN.4, as set out in the Common Criteria or the Common Evaluation Methodology. They can be discrete silicon
or can be integrated into systems on chip (SoC). Secure elements can incorporate an application environment or an
operating system, and can include one or more applications.
This category includes but is not limited to Trusted Platform Modules (TPMs) and embedded Universal Integrated
Circuit Card (UICC).
Smartcards or similar devices are secure elements integrated into a carrier material, such as plastic or wood, in the
shape of a card, or secure elements integrated into carrier materials taking other shapes.
This category includes but is not limited to identity and travel documents, qualified signature cards, replaceable
UICCs, physical payment cards, physical access cards, digital tachograph cards or wrist bands with integrated
payment secure elements.
ELI:
http://data.europa.eu/eli/reg_impl/2025/2392/oj
11/11
OJ
L,
1.12.2025
EN (1) Directive (EU) 2019/944 of the European Parliament and of the Council of 5 June 2019 on common rules for the internal market for electricity and amending Directive 2012/27/EU (OJ L 158, 14.6.2019,
p. 125, ELI: http://data.europa.eu/eli/dir/2019/944/oj).