Commission Implementing Regulation (EU) 2025/2620 of 16 December 2025 laying down rules for the application of Regulation (EU) 2023/956 of the European Parliament and of the Council as regards the calculation of the free allocation adjustment to the number of CBAM certificates to be surrendered

Official Journal EN of the European Union L series 2025/2620 22.12.2025 COMMISSION IMPLEMENTING REGULATION(EU) 2025/2620 of 16 December 2025 laying down rules for the application of Regulation (EU) 2023/956 of the European Parliament and of the Council as regards the calculation of the free allocation adjustment to the number of CBAM certificates to be surrendered (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Regulation (EU) 2023/956 of the European Parliament and of the Council of 10 May 2023 establishing a carbon border adjustment mechanism(1), and in particular Article 31(2) thereof, Whereas: (1) Regulation (EU) 2023/956 establishes the Carbon Border Adjustment Mechanism (CBAM) which seeks to replace the allocation of free allowances used to prevent the risk of carbon leakage under the system for greenhouse gas emission allowance trading within the Union established under Directive 2003/87/EC of the European Parliament and of the Council(2)(the ‘EU ETS’). To ensure a gradual transition from the current system of free allowances in the EU ETS to the CBAM, the CBAM is to be progressively phased in, while free allowances in sectors covered by the CBAM are to be phased out. The combined and transitional application of EU ETS allowances allocated free of charge and of Regulation (EU) 2023/956 should in no case result in more favourable treatment for Union goods compared to goods imported into the customs territory of the Union. (2) Article 31(1) of Regulation (EU) 2023/956 therefore requires that the CBAM certificates to be surrendered are to be adjusted to reflect the extent to which EU ETS allowances are allocated free of charge. The Commission is to adopt implementing acts laying down detailed rules for the calculation of such adjustment (the ‘free allocation adjustment’). (3) The determination of the free allocation adjustment requires taking into account the quantity of imported goods, the cross-sectoral correction factor of the total amount of free allowances under the EU ETS, the relevant CBAM factor as established in Article 10a of Directive 2003/87/EC and a value combining the relevant EU ETS benchmarks for the goods concerned. By analogy with the EU ETS, that value should be called the CBAM benchmark. (4) The EU ETS benchmarks, used to determine the level of free allocation at the level of installations producing, within the Union, the goods listed in Annex I to Regulation (EU) 2023/956, apply to individual sub-installations, while the free allocation adjustment applies at the level of goods as listed in Annex I to Regulation (EU) 2023/956. Therefore, the CBAM benchmarks should be determined for each commodity code. (5) Regulation (EU) 2023/956 allows authorised declarants to report the embedded emissions in imported CBAM goods based on either actual emissions or default values. The free allocation adjustment should reflect that principle. If actual emissions are declared, the free allocation adjustment should equally reflect the actual production process and the composition of goods (‘actual free allocation adjustment’). If default values for emissions are declared, the adjustment should equally be based on default values for free allocation. (1) OJ L 130, 16.5.2023, p. 52, ELI: http://data.europa.eu/eli/reg/2023/956/oj. (2) Directive 2003/87/EC of the European Parliament and of the Council of 13 October 2003 establishing a system for greenhouse gas emission allowance trading within the Union and amending Council Directive 96/61/EC (OJ L 275, 25.10.2003, p. 32, ELI: http:// data.europa.eu/eli/dir/2003/87/oj). ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 1/65EN OJ L, 22.12.2025 (6) Under the EU ETS, free allocation is determined at installation level, using a limited number of product benchmarks. Where emissions and products cannot be assigned to product benchmarks, the heat and fuel benchmarks are used as fallback approaches. Where neither heat nor fuel fallback benchmarks can be assigned, relevant processes are allocated free allowances under a process emission sub-installation based on historical activity levels. For the purposes of the CBAM, those EU ETS benchmarks and fallback approaches should be combined to result in CBAM benchmarks that refer to specific goods. (7) The determination of the actual free allocation adjustment requires not only taking into account the processes at the installation where the goods are produced, but also the processes to produce input materials (precursors) used by the installation. Moreover, the CBAM requires more detailed information than the EU ETS, as the concept of dividing the installation into sub-installations according to the benchmarks would have to be applied at goods level. Finally, the actual free allocation adjustment of goods very much depends on the origin of the precursors and the composition of the goods. The determination of the actual free allocation should be as simple as possible while reflecting the actual conditions of the installation where the goods are produced, that is in terms of production route, the origin of precursors and the composition of goods. (8) The adjustment based on default values for free allocation should be determined based on default CBAM benchmarks. In order to ensure equivalence between embedded emissions and embedded free allocation, the default CBAM benchmarks should reflect the same conditions as those used for the determination of default values for emissions, that is, in terms of production route, the origin of precursors and the composition of goods. However, where this approach would lead to excessive complexity of the calculation rule, simplifying assumptions for the development of the CBAM benchmarks should be made. In particular, the CBAM benchmarks should be applicable independently of the country of origin of the imported good or precursor used. (9) EU ETS benchmarks are determined for the periods from 2021 to 2025 and from 2026 to 2030. In order to ensure equal treatment of imports, the CBAM benchmarks to be applied in the period from 2026 to 2030 should be based on the EU ETS benchmarks applicable during that period. Furthermore, the factor used for calculating the free allocation of process emissions sub-installations in the EU ETS from 1 January 2028 will be different from the value used until 2027. Therefore, CBAM benchmarks based on a process emissions fallback approach should take this change into account. (10) EU ETS benchmarks for the period from 2026 to 2030 will only become available in early 2026. However, based on the already collected data, estimates with a high degree of certainty can already be made for the majority of the ETS benchmarks relevant for CBAM, while for the remaining ETS benchmarks estimates with a good degree of certainty can be made. In order to provide more certainty to importers of CBAM goods already at the beginning of 2026, the CBAM benchmarks in 2026 should be based on the estimated ETS benchmarks to be applied in the period from 2026 to 2030 and apply from 1 January 2026. These CBAM benchmarks should be reviewed at the latest one month after the final EU ETS benchmarks for the period from 2026 to 2030 are published. The updated CBAM benchmarks based on the final ETS benchmarks for the period 2026 to 2030 should apply to goods imported from 1 January 2027. Where the Commission receives evidence demonstrating that the CBAM benchmarks are too high or too low, it should revise the relevant CBAM benchmarks. (11) Article 10a(1), second subparagraph, of Directive 2003/87/EC provides that no free allocation is to be made in respect of any electricity production. Therefore, the free allocation adjustment for electrical energy (CN 2716 00 00) should be zero. (12) To simplify the identification of the reporting period for goods, with the exception of electricity imported into the customs territory of the Union, a presumption should be established that such goods were produced during the year of import. Authorised CBAM declarants should be given the possibility to rebut that presumption by providing evidence demonstrating the actual period during which the goods were produced. As the authorised CBAM declarants are to surrender the CBAM certificates that correspond to the declared embedded emissions for the first time in 2027 for the year 2026, the reporting period should not cover any period before 2026. 2/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 (13) For precursors used in the production of a complex good, the operator of the complex good should, for the purpose of determining embedded free allocation based on actual emissions, identify the applicable reporting period during which the precursor was produced and use the corresponding verified actual values. To simplify the identification of the applicable reporting period, a presumption should be established that precursors used in the production of a complex good were produced during the reporting period during which that complex good was produced. Operators should be given the possibility to rebut that presumption by providing evidence to the verifier demonstrating the actual period during which the precursor was produced. As the authorised CBAM declarants are to surrender the CBAM certificates that correspond to the declared embedded emissions for the first time in 2027 for the year 2026, the reporting period should not cover any period before 2026. (14) To ensure consistency, the reporting period for the calculation of the free allocation adjustment should correspond to the reporting period used for the determination of embedded emissions based on actual values in accordance with Commission Implementing Regulation (EU) 2025/2547(3). (15) In order to reflect the EU ETS benchmarks, CBAM benchmarks for simple goods were calculated using the EU ETS product benchmarks of the same type of good. Where no product benchmark is defined, the average share of the heat versus the fuel benchmark for the period 2021-2025 in the EU ETS reported for relevant product groups in the relevant baseline data was used to determine their respective contribution to the CBAM benchmarks. As no data on energy consumption per tonne of good is available from EU ETS data, energy consumption levels to be applied to these fallback benchmarks as well as the level of process emissions, where relevant, were aligned with the data and assumptions used for the determination of default values for the embedded emissions. In order to further align the CBAM benchmarks for complex goods with the default values for embedded emissions, the quality and quantity of precursors implied in the calculation was aligned with the data used for the calculation of the default values embedded emissions. This includes the selection of reference levels of clinker contained in cement, formulation of mixed fertilisers, and alloy grades for steel. EU ETS benchmarks are not fully aligned with CN codes or the aggregated goods categories defined in Implementing Regulation (EU) 2025/2547. In particular, some EU ETS benchmarks depend on certain production routes. For ensuring that under the CBAM the respective goods are treated equally as under the EU ETS, production-route specific values were determined for primary and secondary aluminium as well as for crude steel based on blast furnace, direct reduced iron (DRI) and electric arc furnace (EAF) routes. (16) Union policy on the environment is to be based on the polluter pays principle, in accordance with Article 191(2) of the Treaty. This principle is also applied in the EU ETS for the free allocation of allowances, as set out in Commission Delegated Regulation (EU) 2019/331(4). Currently, direct reduced iron (DRI) is covered by the hot metal benchmark of the EU ETS and, without further differentiation, imports of steel based on natural-gas DRI would receive a free allocation adjustment that exceeds their embedded emissions for the first years in which a CBAM obligation is due, which means that no CBAM certificates would be due for DRI-based goods. Compared to this, secondary steel imports would face a CBAM obligation, despite having lower actual embedded emissions than DRI. In addition, the potential free allocation adjustment stemming from the hot metal benchmark would create a situation in which more carbon-intensive natural gas based DRI imports would receive more free allocation adjustment than secondary steel producers, which receive comparably less free allocation based on the electric arc furnace (EAF) benchmarks, therefore increasing the carbon leakage risk for secondary steel producers in the Union. In line with the principles to be applied for the allocation of free allowances under the EU ETS, to ensure the environmental integrity of the CBAM and to address the potential risk of carbon leakage of the production of secondary steel in the Union, a dedicated CBAM benchmark for natural gas-based DRI should be created. Taking into account the relative level of embedded emissions, the level of the DRI benchmark should be chosen to ensure that the CBAM obligation for primary natural gas-based DRI imports is lower than for primary blast furnace steel, but higher than for secondary steel. (3) Commission Implementing Regulation (EU) 2025/2547 of 10 December 2025 laying down rules for the application of Regulation (EU) 2023/956 of the European Parliament and the Council as regards the methods for the calculation of emissions embedded in goods (OJ L, 2025/2547, 22.12.2025, ELI: http://data.europa.eu/eli/reg_impl/2025/2547/oj). (4) Commission Delegated Regulation (EU) 2019/331 of 19 December 2018 determining transitional Union-wide rules for harmonised free allocation of emission allowances pursuant to Article 10a of Directive 2003/87/EC of the European Parliament and of the Council (OJ L 59, 27.2.2019, p. 8, ELI: http://data.europa.eu/eli/reg_del/2019/331/oj). ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 3/65EN OJ L, 22.12.2025 (17) The rules for the exchangeability of fuel and electricity have been removed for the determination of free allocation under the EU ETS starting in 2026. This means that free allocation granted under some ETS product benchmarks in the steel sector will cover indirect emissions to a certain extent. As the CBAM scope currently only covers direct emissions in the steel sector, only the direct emission share of the respective ETS benchmarks should be considered when determining the corresponding CBAM benchmarks. For these benchmarks, improvement rates in accordance with [points (c) and (d) of the third subparagraph of] Article 10a(2) of Directive 2003/87/EC do not appropriately reflect the direct emissions to be covered by the CBAM benchmarks. Therefore, the average direct emissions of the 10 % best installations under these ETS benchmarks in the new baseline years 2021 and 2022 should serve as proxy instead of the EU ETS benchmarks for the purpose of calculating the CBAM benchmarks. (18) In line with the European Commission’s Better Regulation guidelines, in parallel with technical consultations with the Member States, including at expert level, the European Commission carried out extensive consultations with relevant stakeholders, including industry representatives, to gather input in its preparatory work on the rules laid down in this Regulation. A call for evidence was organised between 28 August and 25 September 2025 to collect feedback on the main elements of this Regulation. (19) The provisions in this Regulation relate to the free allocation adjustment in respect of greenhouse gas emissions released from 1 January 2026. This Regulation should therefore apply from 1 January 2026. This Regulation should be revised in 2027. (20) The measures provided for in this Regulation are in accordance with the opinion of the CBAM Committee, HAS ADOPTED THIS REGULATION: Article 1 Calculation of the adjustment to the number of CBAM certificates to be surrendered 1. The adjustment to the number of CBAM certificates, as referred to in Article 31 of Regulation (EU) 2023/956 (‘free allocation adjustment’), shall be calculated in accordance with point 2 of the Annex to this Regulation. 2. The free allocation adjustment for electrical energy (CN code 2716 00 00) shall be zero. Article 2 Use of actual values for the calculation of the free allocation The specific embedded free allocation of a good shall be calculated based on actual data in accordance with point 3 of the Annex. Article 3 Use of default values for the calculation of the free allocation By way of derogation from Article 2, the free allocation adjustment shall be calculated based on default values in accordance with point 4 of the Annex, if default values for the specific embedded emissions are used in the CBAM declaration. 4/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Article 4 Precursors produced in different installations Where an installation producing complex goods uses a type of precursor from multiple installations, the embedded free allocation of the complex goods shall by default be determined, for the part of the free allocation embedded in that precursor, as the weighted average of the free allocation embedded in the precursors of that type of precursor used from the different installations. However, if there is sufficient evidence demonstrating that the installation producing the complex goods used, for a given production process, only precursors from a single installation, or from a subset of installations, the embedded free allocation of precursors used in goods produced through that production process shall be determined, respectively, based on the embedded free allocation of precursors obtained from that single installation, or as the weighted average of free allocation embedded in the precursors used from the different installations part of the subset. Article 5 Entry into force and application This Regulation shall enter into force on the third day following that of its publication in the Official Journal of the European Union. It shall apply from 1 January 2026. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Brussels, 16 December 2025. For the Commission The President Ursula VON DER LEYEN ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 5/65EN OJ L, 22.12.2025 ANNEX 1. DEFINITIONS For the purpose of this Annex, the following definitions shall apply: (1) ‘aggregated goods categories’ means aggregated goods categories pursuant to Table 1 of point 2 of Annex I to Implementing Regulation (EU) 2025/2547; (2) ‘reporting period’ means the period corresponding to the calendar year during which the good or, where applicable, the precursor was produced and to be used as reference for the determination of embedded emissions; (3) ‘precursor’ means any input material into a production process included in the list of goods set out in Annex I to Regulation (EU) 2023/956; (4) ‘production route’ means a specific technology used in a production process to produce goods. 2. CALCULATION OF THE FREE ALLOCATION ADJUSTMENT For each good g other than electricity listed in the CBAM declaration pursuant to Article 6 of Regulation (EU) 2023/956, the free allocation adjustment pursuant to Article 31 of that Regulation shall be calculated using the following equation: FAA ¼SEFA × M (Equation 1) g g;y g Where: FAA is the free allocation adjustment of good g; g SEFA is the specific embedded free allocation of good gin year yexpressed as t CO e / tonne of good g; g,y 2 M is the mass of good gimported during the year to which the CBAM declaration applies; g y is the reporting period identified in accordance with Article 7 of Implementing Regulation (EU) 2025/2547. 3. CALCULATION OF SPECIFIC EMBEDDED FREE ALLOCATION (SEFA) OF A GOOD USING ACTUAL DATA 3.1. Production process For a single production process, the process-level specific free allocation shall be calculated using the following equation: SFA ¼CBAM × CSCF × BM� (Equation 2) Procg;y y y g Where: SFA is the process-level specific free allocation in year y calculated for the production process which Procg,y yields good g, expressed as t CO e / tonne of good g; 2 y is the reporting period related to the production of good g; CBAM is the CBAM factor referred to in Article 10a(1a) of Directive 2003/87/EC for the year y y (dimensionless); CSCF is the cross-sectoral correction factor for year y determined by the Commission pursuant to y Article 14(6) of Delegated Regulation (EU) 2019/331 and published in accordance with Article 10a(5) of Directive 2003/87/EC (dimensionless); BM* is the process-related CBAM benchmark for the production process which yields good g, expressed g as t CO e / tonne of gproduced, as set out in point 5, Column A, of this Annex. 2 6/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 3.2. SEFA of a simple good The SEFA of a simple good gshall be calculated using the following equation: SEFA ¼SFA (Equation 3) g;y Procg;y Where: SFA is the direct result of Equation 2. Procg;y 3.3. SEFA of a complex good For a complex good, the calculation of the SEFA shall take into account the production process as well as the SEFA of each precursor and shall be calculated using the following equation: n SEFA ¼SFA + ∑ m × SEFA g;y Procg;y i¼1 i;y i;y i0 (Equation 4) Where: SEFA is the specific embedded free allocation for the complex good gin year y, expressed as t CO e / tonne g,y 2 of good g; SFA is the process-related specific free allocation in year ycalculated for the production process which Procg,y yields good gin accordance with Equation 2 expressed as t CO e / tonne of good g; 2 m is the specific mass of precursor i consumed for the production of one tonne of good g, as i determined in accordance with the rules set out in Implementing Regulation (EU) 2025/2547, expressed as t/t; SEFA is the specific embedded free allocation of precursor i in year y’, expressed as t CO e / tonne of i,y’ i 2 precursor i; y is the reporting period identified in accordance with Article 7 of Implementing Regulation (EU) 2025/2547; y’ is the reporting period of precursor i used in the calculation of SEFA as identified in accordance i i with Article 13 of Implementing Regulation (EU) 2025/2547. The specific mass m of each precursor used shall be determined using the following equation: i,y M m ¼ i;y (Equation 5) i;y AL i;y Where: M is the total mass of the precursor iexpressed in tonnes used during reporting period yfor the production i,y process related to the aggregated goods category to which good g belongs. M is determined in i,y accordance with point E of Annex II to Implementing Regulation (EU) 2025/2547; AL is the activity level, meaning the quantity of goods produced within the system boundaries of a i,y production process, in year y of the production process related to the aggregated goods category to which good gbelongs expressed in tonnes. AL is determined in accordance with point F of Annex II to i,y Implementing Regulation (EU) 2025/2547; y is the reporting period identified in accordance with Article 7 of Implementing Regulation (EU) 2025/2547. Where precursors are themselves complex goods, the calculation of SEFA shall be repeated recursively using i,y’ Equations 2, 3 and 4, as appropriate, until no more precursors are relevant. ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 7/65EN OJ L, 22.12.2025 SEFA for each precursor shall be determined using one of the following methods: i;y0 i (1) where the SEFA value for the precursor i is provided by the producer and verified in accordance with i;y0 i Article 8 of Regulation (EU) 2023/956, the default reporting period of the precursor is used in accordance with Article 13 of Implementing Regulation (EU) 2025/2547 unless there is sufficient evidence to identify the actual year in accordance with Article 13 of Implementing Regulation (EU) 2025/2547. (2) where the SEFA value for the precursor iis not provided by the producer,the default reporting period of i;y0 i the precursor is used in accordance with Article 13 of Implementing Regulation (EU) 2025/2547 and SEFA is determined by selecting the appropriate BM value from point 5, Column B, of this Annex, taking i;y i0 g into account the following factors: (a) the country of origin of precursor i; (b) the CN code for precursor i; (c) if applicable, further parameters defining the precursor i, as specified in Annex to Implementing Regulation (EU) 2025/2547; (d) if applicable, the [default] production route specified for the country of origin of precursor ias specified in Annex to Implementing Regulation (EU) 2025/2547. 4. CALCULATION OF SPECIFIC EMBEDDED FREE ALLOCATION (SEFA) OF A GOOD USING DEFAULT VALUES Where default values are used, the SEFA is calculated using the following equation: SEFA ¼CBAM × CSCF × BM (Equation 6) g;y y y g Where: CBAM is the CBAM factor referred to in Article 10a(1a) of Directive 2003/87/EC for the year y y (dimensionless); CSCF is the cross-sectoral correction factor for the reporting period y determined by the Commission y pursuant to Article 14(6) of Delegated Regulation (EU) 2019/331 and published in accordance with Article 10a(5) of Directive 2003/87/EC (dimensionless); BM is the default CBAM benchmark set out in point 5, Column B, of this Annex; g y is the reporting period as identified in accordance with Article 7 of Implementing Regulation (EU) 2025/2547. For the purpose of selecting the appropriate value for BM the following parameters shall be taken into account: g (a) the country of origin of good g; (b) the CN code for good g; (c) if applicable, further parameters defining the good g, as specified in Annex to Implementing Regulation (EU) 2025/2547; (d) if applicable, the [default] production route specified for the country of origin as specified in Annex I to Implementing Regulation (EU) 2025/2547. 8/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 5. CBAM BENCHMARKS 5.1. Rules for selecting the appropriate CBAM benchmark value when using default values Where default values are used to determine SEFA of a final good or of a precursor, the same production route shall be used as indicated in Annex I to Commission Implementing Regulation (EU) 2025/2621(1) for the country of origin of that good or precursor. Where different alloy grades for steel are given in the table for the same CN code, the highest benchmark value given for the relevant production year is used. 5.2. Rules for selecting the appropriate CBAM benchmark value when using actual data 5.2.1. Cement ‘White cement clinker’ means cement clinker for use as main binding component in the formulation of materials such as joint filers, ceramic tile adhesives, insulation, and anchorage mortars, industrial floor mortars, ready mixed plaster, repair mortars, and water- tight coatings with maximum average contents of 0,4 mass-% Fe O , 0,003 2 3 mass-% Cr O and 0,03 mass-% Mn O . 2 3 2 3 ‘Grey cement clinker’ means other cement clinker than white cement clinker. In the case of other hydraulic cements (CN 2523 90 00) containing a mixture of white clinker and of grey clinker and/or calcined clay, the CBAM benchmark shall be calculated as a weighted average that reflects the composition. 5.2.2. Fertilisers No specific rules apply. 5.2.3. Iron and steel ‘Carbon steel’ means steel other than stainless steel, high alloy or low alloy steel. ‘Stainless steel’ means alloy steels containing, by weight, 1,2 % or less of carbon and 10,5 % or more of chromium, with or without other elements. ‘High alloy steel’ means steel containing 8 % [or more metallic alloying elements or where high surface quality and processability is required]. ‘Low alloy steel’ means alloy steel other than high-alloy steel. 5.2.4. Aluminium No specific rules apply. 5.3. CBAM benchmark values Where more than one benchmark value is given for a specific CN code, the meaning of the indicators is as follows: (1) Value is to be used for production years 2026-27 (2) Value is to be used for production years 2028-30 (A) grey clinker / cement (B) white clinker / cement (C) Carbon Steel based on BF/BOF (D) Carbon Steel based on DRI/EAF (E) Carbon Steel based on Scrap/EAF (F) Low alloy Steel based on BF/BOF (1) Commission Implementing Regulation (EU) 2025/2621 of 16 December 2025 laying down rules for the application of Regulation (EU) 2023/956 of the European Parliament and the Council as regards the establishment of default values (not yet published in the Official Journal). ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 9/65EN OJ L, 22.12.2025 (G) Low alloy Steel based on DRI/EAF (H) Low alloy Steel based on scrap/EAF (J) High alloy Steel (based on EAF) (K) primary Aluminium (L) secondary Aluminium Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 Cement 2507 00 80 Kaolinic clays (other than kaolin) 0,666 0,666 2523 10 00 Cement clinkers 0,666 (A) 0,666 (A) 0,859 (B) 0,859 (B) 2523 21 00 White portland cement, whether or not artificially 0,000 0,859 coloured 2523 29 00 Portland cement (excl. white, whether or not 0,000 0,666 artificially coloured) 2523 30 00 Aluminous cement 0,717 (1) 0,717 (1) 0,686 (2) 0,686 (2) 2523 90 00 Cement, whether or not coloured (excl. portland 0,000 (A) 0,666 (A) cement and aluminous cement) 0,000 (B) 0,847 (B) Hydrogen 2804 10 00 Hydrogen 5,089 5,089 Fertilisers 2808 00 00 Nitric acid; sulphonitric acids 0,151 0,582 2814 10 00 Anhydrous ammonia 1,522 1,522 2814 20 00 Ammonia in aqueous solution 0,457 0,457 2834 21 00 Nitrate of potassium 0,019 0,626 3102 10 12 Urea in aqueous solution, containing > 45 % nitrogen 0,018 0,304 in relation to the weight of the dry product and containing ≥ 31,8 % but ≤ 33,2 % by weight of urea (excl. that in packages with a gross weight of ≤ 10 kg) 3102 10 15 Urea in aqueous solution, containing > 45 % nitrogen 0,029 0,503 in relation to the weight of the dry product and containing > 33,2 % but ≤ 55 % by weight of urea (excl. that in packages with a gross weight of ≤ 10 kg) 3102 10 19 Urea, whether or not in aqueous solution, containing 0,053 0,902 > 45 % nitrogen in relation to the weight of the dry product (excl. that in tablets or similar forms, or in packages with a gross weight of ≤ 10 kg, or in aqueous solution containing ≥ 31,8 % but ≤ 55 % by weight of urea) 3102 10 90 Urea, whether or not in aqueous solution, containing 0,051 0,882 ≤ 45 % by weight of nitrogen on the dry anhydrous product (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of ≤ 10 kg) 10/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 3102 21 00 Ammonium sulphate (excl. that in tablets or similar 0,022 0,414 forms, or in packages with a gross weight of ≤ 10 kg) 3102 29 00 Double salts and mixtures of ammonium sulphate 0,019 0,566 and ammonium nitrate (excl. goods of this chapter in tablets or similar forms or in packages of a gross weight of ≤ 10 kg) 3102 30 10 Ammonium nitrate in aqueous solution (excl. that in 0,000 0,508 packages with a gross weight of ≤ 10 kg) 3102 30 90 Ammonium nitrate (excl. that in aqueous solution, in 0,019 0,767 tablets or similar forms, or in packages with a gross weight of ≤ 10 kg) 3102 40 10 Mixtures of ammonium nitrate with calcium 0,019 0,688 carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing ≤ 28 % nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of ≤ 10 kg) 3102 40 90 Mixtures of ammonium nitrate with calcium 0,019 0,688 carbonate or other inorganic non-fertilising substances, for use as fertilisers, containing > 28 % nitrogen by weight (excl. those in tablets or similar forms, or in packages with a gross weight of ≤ 10 kg) 3102 50 00 Sodium nitrate (excl. that in tablets or similar forms, 0,270 (1) 0,701 (1) or in packages with a gross weight of ≤ 10 kg) 0,254 (2) 0,685 (2) 3102 60 00 Double salts and mixtures of calcium nitrate and 0,042 0,633 ammonium nitrate (excl. those in tablets or similar forms, or in packages with a gross weight of ≤ 10 kg) 3102 80 00 Mixtures of urea and ammonium nitrate in aqueous 0,000 0,625 or ammoniacal solution (excl. those in packages with a gross weight of ≤ 10 kg) 3102 90 00 Mineral or chemical nitrogen fertilisers (excl. urea; 0,053 0,847 ammonium sulphate; ammonium nitrate; sodium nitrate; double salts and mixtures of ammonium nitrate with ammonium sulphate or calcium; mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution; mixtures of ammonium nitrate and calcium carbonate or other non-fertilising inorganic elements; in tablets or similar in packages ≤ 10 kg) 3105 10 00 Mineral or chemical fertilisers of animal or vegetable 0,019 0,376 origin, in tablets or similar forms, or in packages with a gross weight of ≤ 10 kg ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 11/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 3105 20 10 Mineral or chemical fertilisers containing phosphorus 0,090 0,434 and potassium, with a nitrogen content > 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of ≤ 10 kg) 3105 20 90 Mineral or chemical fertilisers containing nitrogen, 0,090 0,319 phosphorus and potassium, with a nitrogen content ≤ 10 % by weight on the dry anhydrous product (excl. those in tablets or similar forms, or in packages with a gross weight of ≤ 10 kg) 3105 30 00 Diammonium hydrogenorthophosphate 0,006 0,339 "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of ≤ 10 kg) 3105 40 00 Ammonium dihydrogenorthophosphate 0,006 0,173 "monoammonium phosphate", whether or not mixed with diammonium hydrogenorthophosphate "diammonium phosphate" (excl. that in tablets or similar forms, or in packages with a gross weight of ≤ 10 kg) 3105 51 00 Mineral or chemical fertilisers containing nitrates and 0,090 0,548 phosphates (excl. ammonium dihydrogenorthophosphate "Monoammonium phosphate", diammonium hydrogenorthophosphate "Diammonium phosphate", and those in tablets or similar forms, or in packages with a gross weight of ≤ 10 kg) 3105 59 00 Mineral or chemical fertilisers containing the two 0,006 0,391 fertilising elements nitrogen (excl. nitrate) and phosphorus but not nitrates (excl. ammonium dihydrogenorthophosphate "monoammonium phosphate", diammonium hydrogenorthophosphate "diammonium phosphate" in tablets or similar forms, or in packages with a gross weight of ≤ 10 kg) 3105 90 20 Mineral or chemical fertilisers containing the two 0,019 0,476 fertilising elements nitrogen and potassium, or one principal fertilising substance only, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, containing > 10 % nitrogen by weight (excl. in tablets or similar forms, or in packages with a gross weight of ≤ 10 kg) 3105 90 80 Mineral or chemical fertilisers containing the two 0,019 0,248 fertilising elements nitrogen and potassium, or one main fertilising element, incl. mixtures of animal or vegetable fertilisers with chemical or mineral fertilisers, not containing nitrogen or with a nitrogen content, by weight, of ≤ 10 % (excl. in tablets or similar forms or in packages of a gross weight of ≤ 10 kg) 12/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 Iron & Steel 2601 12 00 Agglomerated iron ores and concentrates (excl. 0,086 0,086 roasted iron pyrites) 7201 10 11 Non-alloy pig iron in pigs, blocks or other primary 1,089 1,210 forms, containing by weight ≤ 0,5 % phosphorus, ≥ 0,4 % manganese and ≤ 1 % silicon 7201 10 19 Non-alloy pig iron in pigs, blocks or other primary 1,089 1,210 forms, containing by weight ≤ 0,5 % phosphorus, ≥ 0,4 % manganese and > 1 % silicon 7201 10 30 Non-alloy pig iron in pigs, blocks or other primary 1,089 1,210 forms, containing by weight ≤ 0,5 % phosphorus, and ≥ 0,1 % but < 0,4 % manganese 7201 10 90 Non-alloy pig iron in pigs, blocks or other primary 1,089 1,210 forms, containing by weight ≤ 0,5 % phosphorus, and ≤ 0,1 % manganese 7201 20 00 Non-alloy pig iron in pigs, blocks or other primary 1,089 1,210 forms, containing by weight ≥ 0,5 % phosphorus 7201 50 10 Alloy pig iron in pigs, blocks or other primary forms, 1,089 1,210 containing by weight ≥ 0,3 % but ≤ 1 % titanium and ≥ 0,5 % but ≤ 1 % vanadium 7201 50 90 Alloy pig iron and spiegeleisen, in pigs, blocks or 1,089 1,210 other primary forms (excl. alloy iron containing, by weight, ≥ 0,3 % but ≤ 1 % titanium and ≥ 0,5 % but ≤ 1 % vanadium) 7202 11 20 Ferro-manganese, containing by weight > 2 % carbon, 1,361 (1) 1,361 (1) with a granulometry ≤ 5 mm and a manganese 1,277 (2) 1,277 (2) content by weight > 65 % 7202 11 80 Ferro-manganese, containing by weight > 2 % carbon 1,361 (1) 1,361 (1) (excl. ferro-manganese with a granulometry of 1,277 (2) 1,277 (2) ≤ 5 mm and containing by weight > 65 % manganese) 7202 19 00 Ferro-manganese, containing by weight ≤ 2 % carbon 1,361 (1) 1,361 (1) 1,277 (2) 1,277 (2) 7202 41 10 Ferro-chromium, containing by weight > 4 % but 1,142 (1) 1,142 (1) ≤ 6 % carbon 1,106 (2) 1,106 (2) 7202 41 90 Ferro-chromium, containing by weight > 6 % carbon 1,142 (1) 1,142 (1) 1,106 (2) 1,106 (2) 7202 49 10 Ferro-chromium, containing by weight ≤ 0,05 % 1,142 (1) 1,142 (1) carbon 1,106 (2) 1,106 (2) 7202 49 50 Ferro-chromium, containing by weight > 0,05 % but 1,142 (1) 1,142 (1) ≤ 0,5 % carbon 1,106 (2) 1,106 (2) 7202 49 90 Ferro-chromium, containing by weight > 0,5 % but 1,142 (1) 1,142 (1) ≤ 4 % carbon 1,106 (2) 1,106 (2) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 13/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7202 60 00 Ferro-nickel 2,390 (1) 2,390 (1) 2,295 (2) 2,295 (2) 7203 10 00 Ferrous products obtained by direct reduction of iron 0,295 0,397 ore, in lumps, pellets or similar forms 7203 90 00 Spongy ferrous products, obtained from molten pig 0,295 0,397 iron by atomisation, iron of a purity of ≥ 99,94 %, in lumps, pellets or similar forms 7205 10 00 Granules, of pig iron, spiegeleisen, iron or steel (excl. 0,000 1,288 (C) granules of ferro-alloys, turnings and filings of iron or 0,424 (D) steel, certain small calibre items, defective balls for 0,027 (E) ball-bearings) 7205 21 00 Powders, of alloy steel (excl. powders of ferro-alloys 0,000 1,460 (F)(1) and radioactive iron powders "isotopes") 0,659 (G)(1) 0,328 (H)(1) 0,852 (J)(1) 1,298 (F)(2) 0,647 (G)(2) 0,315 (H)(2) 0,820 (J)(2) 7205 29 00 Powders, of pig iron, spiegeleisen, iron or non-alloy 0,000 1,288 (C) steel (excl. powders of ferro-alloys and radioactive 0,424 (D) iron powders "isotopes") 0,027 (E) 7206 10 00 Ingots, of iron and non-alloy steel (excl. remelted 0,150 (C) 1,288 (C) scrap ingots, continuous cast products, iron of 0,027 (D) 0,424 (D) heading 7203) 0,027 (E) 0,027 (E) 7206 90 00 Iron and non-alloy steel, in puddled bars or other 0,150 (C) 1,288 (C) primary forms (excl. ingots, remelted scrap ingots, 0,027 (D) 0,424 (D) continuous cast products, iron of heading 7203) 0,027 (E) 0,027 (E) 7207 11 11 Semi-finished products, of non-alloy free-cutting steel, 0,188 (C) 1,364 (C) containing by weight < 0,25 % carbon, of square or 0,065 (D) 0,475 (D) rectangular cross-section, the width < twice the 0,065 (E) 0,066 (E) thickness, rolled or obtained by continuous casting 7207 11 14 Semi-finished products, of iron or non-alloy steel, 0,188 (C) 1,364 (C) containing by weight < 0,25 % carbon, of square or 0,065 (D) 0,475 (D) rectangular cross-section, the width < twice the 0,065 (E) 0,066 (E) thickness of ≤ 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 7207 11 16 Semi-finished products, of iron or non-alloy steel, 0,188 (C) 1,364 (C) containing by weight < 0,25 % carbon, of square or 0,065 (D) 0,475 (D) rectangular cross-section, the width < twice the 0,065 (E) 0,066 (E) thickness of > 130 mm, rolled or obtained by continuous casting (excl. free-cutting steel) 14/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7207 11 90 Semi-finished products of iron or non-alloy steel, 0,453 (C) 1,629 (C) containing by weight < 0,25 % carbon, of rectangular 0,330 (D) 0,740 (D) cross-section, the width < twice the thickness, forged 0,330 (E) 0,331 (E) 7207 12 10 Semi-finished products of iron or non-alloy steel, 0,188 (C) 1,364 (C) containing by weight < 0,25 of carbon, of rectangular 0,065 (D) 0,475 (D) "other than square" cross-section, the width 0,065 (E) 0,066 (E) measuring ≥ twice the thickness, rolled or obtained by continuous casting 7207 12 90 Semi-finished products of iron or non-alloy steel, 0,453 (C) 1,629 (C) containing by weight < 0,25 % carbon, of rectangular 0,330 (D) 0,740 (D) "other than square" cross-section, the width ≥ twice 0,330 (E) 0,331 (E) the thickness, forged 7207 19 12 Semi-finished products, of iron or non-alloy steel, 0,188 (C) 1,364 (C) containing by weight < 0,25 % carbon, of circular or 0,065 (D) 0,475 (D) polygonal cross-section, rolled or obtained by 0,065 (E) 0,066 (E) continuous casting 7207 19 19 Semi-finished products of iron or non-alloy steel, 0,453 (C) 1,629 (C) containing by weight < 0,25 % carbon, of circular or 0,330 (D) 0,740 (D) polygonal cross-section, forged 0,330 (E) 0,331 (E) 7207 19 80 Semi-finished products of iron or non-alloy steel, 0,188 (C) 1,364 (C) containing by weight < 0,25 % carbon (excl. semi- 0,065 (D) 0,475 (D) products, of square, rectangular, circular or polygonal 0,065 (E) 0,066 (E) cross-section) 7207 20 11 Semi-finished products, of non-alloy free-cutting steel, 0,188 (C) 1,364 (C) containing by weight ≥ 0,25 % carbon, of square or 0,065 (D) 0,475 (D) rectangular cross-section, the width < twice the 0,065 (E) 0,066 (E) thickness, rolled or obtained by continuous casting 7207 20 15 Semi-finished products of iron or non-alloy steel, 0,188 (C) 1,364 (C) containing by weight ≥ 0,25 % but < 0,6 % carbon, of 0,065 (D) 0,475 (D) square or rectangular cross-section, the width < twice 0,065 (E) 0,066 (E) the thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 7207 20 17 Semi-finished products of iron or non-alloy steel, 0,188 (C) 1,364 (C) containing by weight ≥ 0,6 % carbon, of square or 0,065 (D) 0,475 (D) rectangular cross-section, the width < twice the 0,065 (E) 0,066 (E) thickness, rolled or obtained by continuous casting (excl. free-cutting steel) 7207 20 19 Semi-finished products of iron or non-alloy steel, 0,453 (C) 1,629 (C) containing by weight ≥ 0,25 % carbon, of square or 0,330 (D) 0,740 (D) rectangular cross-section, the width < twice the 0,330 (E) 0,331 (E) thickness, forged ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 15/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7207 20 32 Semi-finished products of iron or non-alloy steel, 0,188 (C) 1,364 (C) containing by weight ≥ 0,25 of carbon, of rectangular 0,065 (D) 0,475 (D) "other than square" cross-section, the width 0,065 (E) 0,066 (E) measuring ≥ twice the thickness, rolled or obtained by continuous casting 7207 20 39 Semi-finished products of iron or non-alloy steel, 0,453 (C) 1,629 (C) containing by weight ≥ 0,25 % carbon, of rectangular 0,330 (D) 0,740 (D) "other than square" cross-section and the width 0,330 (E) 0,331 (E) ≥ twice the thickness, forged 7207 20 52 Semi-finished products of iron or non-alloy steel, 0,188 (C) 1,364 (C) containing by weight ≥ 0,25 % carbon, of circular or 0,065 (D) 0,475 (D) polygonal cross-section, rolled or obtained by 0,065 (E) 0,066 (E) continuous casting 7207 20 59 Semi-finished products of iron or non-alloy steel, 0,453 (C) 1,629 (C) containing by weight ≥ 0,6 % carbon, of circular or 0,330 (D) 0,740 (D) polygonal cross-section, forged 0,330 (E) 0,331 (E) 7207 20 80 Semi-finished products of iron or non-alloy steel, 0,188 (C) 1,364 (C) containing by weight ≥ 0,25 % carbon (excl. those of 0,065 (D) 0,475 (D) square, rectangular, circular or polygonal cross- 0,065 (E) 0,066 (E) section) 7208 10 00 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 600 mm, in coils, simply hot-rolled, not 0,481 (D) clad, plated or coated, with patterns in relief directly 0,072 (E) due to the rolling process 7208 25 00 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 600 mm, in coils, simply hot-rolled, not 0,481 (D) clad, plated or coated, of a thickness of ≥ 4,75 mm, 0,072 (E) pickled, without patterns in relief 7208 26 00 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 600 mm, in coils, simply hot-rolled, not 0,481 (D) clad, plated or coated, of a thickness of ≥ 3 mm but 0,072 (E) < 4,75 mm, pickled, without patterns in relief 7208 27 00 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 600 mm, in coils, simply hot-rolled, not 0,481 (D) clad, plated or coated, of a thickness of < 3 mm, 0,072 (E) pickled, without patterns in relief 7208 36 00 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 600 mm, in coils, simply hot-rolled, not 0,481 (D) clad, plated or coated, of a thickness of ≥ 10 mm, not 0,072 (E) pickled, without patterns in relief 16/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7208 37 00 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 600 mm, in coils, simply hot-rolled, not 0,481 (D) clad, plated or coated, of a thickness of ≥ 4,75 mm 0,072 (E) but < 10 mm, not pickled, without patterns in relief 7208 38 00 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 600 mm, in coils, simply hot-rolled, not 0,481 (D) clad, plated or coated, of a thickness of ≥ 3 mm but 0,072 (E) < 4,75 mm, not pickled, without patterns in relief 7208 39 00 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 600 mm, in coils, simply hot-rolled, not 0,481 (D) clad, plated or coated, of a thickness of < 3 mm, not 0,072 (E) pickled, without patterns in relief 7208 40 00 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 600 mm, not in coils, simply hot-rolled, 0,481 (D) not clad, plated or coated, with patterns in relief 0,072 (E) directly due to the rolling process 7208 51 20 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 600 mm, not in coils, simply hot-rolled, 0,481 (D) not clad, plated or coated, of a thickness of > 15 mm, 0,072 (E) without patterns in relief 7208 51 91 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 2.050 mm, not in coils, simply hot-rolled, 0,481 (D) not clad, plated or coated, of a thickness of > 10 mm 0,072 (E) but ≤ 15 mm, without patterns in relief (excl. "wide flats") 7208 51 98 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of < 2.050 mm but ≥ 600 mm, not in coils, 0,481 (D) simply hot-rolled, not clad, plated or coated, of a 0,072 (E) thickness of > 10 mm but ≤ 15 mm, without patterns in relief 7208 52 10 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≤ 1.250 mm, not in coils, simply hot-rolled 0,481 (D) on four faces or in a closed box pass, not clad, plated 0,072 (E) or coated, of a thickness of ≥ 4,75 mm but ≤ 10 mm, without patterns in relief 7208 52 91 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 2.050 mm, not in coils, simply hot-rolled, 0,481 (D) not clad, plated or coated, of a thickness of 0,072 (E) ≥ 4,75 mm but ≤ 10 mm, without patterns in relief ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 17/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7208 52 99 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of < 2.050 mm but ≥ 600 mm, not in coils, 0,481 (D) simply hot-rolled, not clad, plated or coated, of a 0,072 (E) thickness of ≥ 4,75 mm but ≤ 10 mm, without patterns in relief (excl. rolled on four faces or in a closed bow pass of a width ≤ 1.250 mm) 7208 53 10 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≤ 1.250 mm, not in coils, simply hot-rolled 0,481 (D) on four faces or in a closed box pass, not clad, plated 0,072 (E) or coated, of a thickness of ≥ 4 mm but < 4,75 mm, without patterns in relief 7208 53 90 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 600 mm, not in coils, simply hot-rolled, 0,481 (D) not clad, plated or coated, of a thickness of ≥ 3 mm 0,072 (E) but < 4,75 mm, without patterns in relief (excl. rolled on four faces or in a closed bow pass of a width ≤ 1.250 mm and of a thickness of ≥ 4 mm) 7208 54 00 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width of ≥ 600 mm, not in coils, simply hot-rolled, 0,481 (D) not clad, plated or coated, of a thickness of < 3 mm, 0,072 (E) without patterns in relief 7208 90 20 Flat-rolled products of iron or steel, of a width 0,044 1,370 (C) ≥ 600 mm, hot-rolled and further worked, but not 0,481 (D) clad, plated or coated, perforated 0,072 (E) 7208 90 80 Flat-rolled products of iron or steel, of a width 0,044 1,370 (C) ≥ 600 mm, hot-rolled and further worked, but not 0,481 (D) clad, plated or coated, non-perforated 0,072 (E) 7209 15 00 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, in coils, simply cold-rolled "cold- 0,533 (D) reduced", not clad, plated or coated, of a thickness of 0,108 (E) ≥ 3 mm 7209 16 10 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, in coils, simply cold-rolled "cold- 0,533 (D) reduced", of a thickness of > 1 mm but < 3 mm 0,108 (E) "electrical" 7209 16 90 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, in coils, simply cold-rolled "cold- 0,533 (D) reduced", of a thickness of > 1 mm but < 3 mm 0,108 (E) "electrical" 7209 17 10 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, in coils, simply cold-rolled "cold- 0,533 (D) reduced", of a thickness of ≥ 0,5 mm but ≤ 1 mm 0,108 (E) "electrical" 18/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7209 17 90 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, in coils, simply cold-rolled "cold- 0,533 (D) reduced", not clad, plated or coated, of a thickness of 0,108 (E) ≥ 0,5 mm but ≤ 1 mm (excl. electrical) 7209 18 10 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, in coils, simply cold-rolled "cold- 0,533 (D) reduced", of a thickness of < 0,5 mm "electrical" 0,108 (E) 7209 18 91 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, in coils, simply cold-rolled "cold- 0,533 (D) reduced", not clad, plated or coated, of a thickness of 0,108 (E) ≥ 0,35 mm but < 0,5 mm (excl. electrical) 7209 18 99 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, in coils, simply cold-rolled "cold- 0,533 (D) reduced", not clad, plated or coated, of a thickness of 0,108 (E) < 0,35 mm (excl. electrical) 7209 25 00 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, not in coils, simply cold-rolled 0,533 (D) "cold-reduced", not clad, plated or coated, of a 0,108 (E) thickness of ≥ 3 mm 7209 26 10 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, not in coils, simply cold-rolled 0,533 (D) "cold-reduced", of a thickness of > 1 mm but < 3 mm 0,108 (E) "electrical" 7209 26 90 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, not in coils, simply cold-rolled 0,533 (D) "cold-reduced", not clad, plated or coated, of a 0,108 (E) thickness of > 1 mm but < 3 mm (excl. electrical) 7209 27 10 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, not in coils, simply cold-rolled 0,533 (D) "cold-reduced", of a thickness of ≥ 0,5 mm but 0,108 (E) ≤ 1 mm "electrical" 7209 27 90 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, not in coils, simply cold-rolled 0,533 (D) "cold-reduced", not clad, plated or coated, of a 0,108 (E) thickness of ≥ 0,5 mm but ≤ 1 mm (excl. electrical) 7209 28 10 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, not in coils, simply cold-rolled 0,533 (D) "cold-reduced", of a thickness of < 0,5 mm 0,108 (E) "electrical" ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 19/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7209 28 90 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of ≥ 600 mm, not in coils, simply cold-rolled 0,533 (D) "cold-reduced", not clad, plated or coated, of a 0,108 (E) thickness of < 0,5 mm (excl. electrical) 7209 90 20 Flat-rolled products of iron or steel, of a width of 0,079 1,458 (C) ≥ 600 mm, cold-rolled "cold-reduced" and further 0,533 (D) worked, but not clad, plated or coated, perforated 0,108 (E) 7209 90 80 Flat-rolled products of iron or steel, of a width of 0,079 1,458 (C) ≥ 600 mm, cold-rolled "cold-reduced" and further 0,533 (D) worked, but not clad, plated or coated, non-perforated 0,108 (E) 7210 11 00 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of ≥ 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", tinned, of a thickness of ≥ 0,5 mm 0,141 (E) 7210 12 20 Tinplate of iron or non-alloy steel, of a width of 0,112 1,491 (C) ≥ 600 mm and of a thickness of < 0,5 mm, tinned 0,567 (D) [coated with a layer of metal containing, by weight, 0,141 (E) ≥ 97 % of tin], not further worked than surface- treated 7210 12 80 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of ≥ 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", plated or coated with tin, of a thickness of 0,141 (E) < 0,5 mm (excl. tinplate) 7210 20 00 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of ≥ 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", plated or coated with lead, incl. terne-plate 0,141 (E) 7210 30 00 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of ≥ 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", electrolytically plated or coated with zinc 0,141 (E) 7210 41 00 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of ≥ 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", corrugated, plated or coated with zinc (excl. 0,141 (E) electrolytically plated or coated with zinc) 7210 49 00 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of ≥ 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", not corrugated, plated or coated with zinc 0,141 (E) (excl. electrolytically plated or coated with zinc) 7210 50 00 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of ≥ 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", plated or coated with chromium oxides or 0,141 (E) with chromium and chromium oxides 20/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7210 61 00 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of ≥ 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", plated or coated with aluminium-zinc alloys 0,141 (E) 7210 69 00 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of ≥ 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", plated or coated with aluminium (excl. 0,141 (E) products plated or coated with aluminium-zinc alloys) 7210 70 10 Tinplate of a width of ≥ 600 mm and of a thickness of 0,112 1,491 (C) < 0,5 mm, tinned [coated with a layer of metal 0,567 (D) containing, by weight, ≥ 97 % of tin], not further 0,141 (E) worked than varnished, and flat products plated or coated with chromium oxides or with chromium and chromium oxides, of iron or non-alloy steel, of a width of ≥ 600 mm, hot-rolled or cold-rolled "cold- reduced", varnished 7210 70 80 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of ≥ 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", painted, varnished or plastic coated (excl. 0,141 (E) tinplate and products electrolytically plated or coated with chrome, varnished) 7210 90 30 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of ≥ 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", clad 0,141 (E) 7210 90 40 Flat-rolled products of iron or non-alloy steel, tinned 0,112 1,491 (C) and printed, of a width of ≥ 600 mm, hot-rolled or 0,567 (D) cold-rolled "cold-reduced" 0,141 (E) 7210 90 80 Flat-rolled products of iron or non-alloy steel, hot- 0,112 1,491 (C) rolled or cold-rolled "cold-reduced", of a width of 0,567 (D) ≥ 600 mm, plated or coated (excl. plated or coated 0,141 (E) with thin, lead "incl. terne-plate", zinc, aluminium, chromium, chromium oxides, plastics, platinum, painted or varnished, clad and tinned and printed) 7211 13 00 Flat-rolled products of iron or non-alloy steel, simply 0,044 1,370 (C) hot-rolled on four faces or in a closed box pass, not 0,481 (D) clad, plated or coated, of a width of > 150 mm but 0,072 (E) < 600 mm and a thickness of ≥ 4 mm, not in coils, without patterns in relief, commonly known as "wide flats" 7211 14 00 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width < 600 mm, not further worked than hot-rolled, 0,481 (D) not clad, plated or coated, of a thickness of 0,072 (E) ≥ 4,75 mm (excl. "wide flats") ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 21/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7211 19 00 Flat-rolled products of iron or non-alloy steel, of a 0,044 1,370 (C) width < 600 mm, simply hot-rolled, not clad, plated 0,481 (D) or coated, of a thickness < 4,75 mm (excl. "wide 0,072 (E) flats") 7211 23 20 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of < 600 mm, simply cold-rolled "cold- 0,533 (D) reduced", not clad, plated or coated, containing by 0,108 (E) weight < 0,25 % of carbon "electrical" 7211 23 30 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of < 600 mm and of a thickness of ≥ 0,35 mm, 0,533 (D) simply cold-rolled "cold-reduced", not clad, plated or 0,108 (E) coated, containing by weight < 0,25 % of carbon (excl. electrical plate) 7211 23 80 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of < 600 mm and of a thickness of < 0,35 mm, 0,533 (D) simply cold-rolled "cold-reduced", not clad, plated or 0,108 (E) coated, containing by weight < 0,25 % of carbon (excl. electrical plate) 7211 29 00 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of < 600 mm, simply cold-rolled "cold- 0,533 (D) reduced", not clad, plated or coated, containing by 0,108 (E) weight ≥ 0,25 % of carbon 7211 90 20 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of < 600 mm, hot-rolled or cold-rolled "cold- 0,533 (D) reduced" and further worked, but not clad, plated or 0,108 (E) coated, perforated 7211 90 80 Flat-rolled products of iron or non-alloy steel, of a 0,079 1,458 (C) width of < 600 mm, hot-rolled or cold-rolled "cold- 0,533 (D) reduced" and further worked, but not clad, plated or 0,108 (E) coated non-perforated 7212 10 10 Tinplate of iron or non-alloy steel, of a width of 0,112 1,491 (C) < 600 mm and of a thickness of < 0,5 mm, tinned 0,567 (D) [coated with a layer of metal containing, by weight, 0,141 (E) ≥ 97 % of tin], not further worked than surface- treated 7212 10 90 Flat-rolled products of iron or non-alloy steel, hot- 0,112 1,491 (C) rolled or cold-rolled "cold-reduced", of a width of 0,567 (D) < 600 mm, tinned (excl. tinplate, not further worked 0,141 (E) than surface-treated) 7212 20 00 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of < 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", electrolytically plated or coated with zinc 0,141 (E) 22/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7212 30 00 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of < 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", tinned (excl. electrolytically plated or coated 0,141 (E) with zinc) 7212 40 20 Tinplate of a width of < 600 mm and of a thickness of 0,112 1,491 (C) < 0,5 mm, tinned [coated with a layer of metal 0,567 (D) containing, by weight, ≥ 97 % of tin], not further 0,141 (E) worked than varnished, and flat products plated or coated with chromium oxides or with chromium and chromium oxides, of iron or non-alloy steel, of a width of < 600 mm, hot-rolled or cold-rolled "cold- reduced", varnished 7212 40 80 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of < 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", painted, varnished or plastic coated (excl. 0,141 (E) tinplate, not further worked than varnished, and products plated or coated with chromium oxides or with chromium and chromium oxides, varnished) 7212 50 20 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of < 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", plated or coated with chromium oxides or 0,141 (E) with chromium and chromium oxides (excl. varnished) 7212 50 30 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of < 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", plated or coated with chromium or nickel 0,141 (E) 7212 50 40 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of < 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", plated or coated with copper 0,141 (E) 7212 50 61 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of < 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", plated or coated with aluminium-zinc alloys 0,141 (E) 7212 50 69 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of < 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", plated or coated with aluminium (excl. 0,141 (E) products plated or coated with aluminium-zinc alloys) 7212 50 90 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of < 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", clad (excl. products plated or coated with 0,141 (E) tin or zinc, copper, with chromium oxides or with chromium and chromium oxides, chromium, nickel or aluminium, painted or varnished, and plastic- coated) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 23/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7212 60 00 Flat-rolled products of iron or non-alloy steel, of a 0,112 1,491 (C) width of < 600 mm, hot-rolled or cold-rolled "cold- 0,567 (D) reduced", clad 0,141 (E) 7213 10 00 Bars and rods, hot-rolled, in irregularly wound coils of 0,038 1,364 (C) iron or non-alloy steel, with indentations, ribs, 0,475 (D) grooves or other deformations produced during the 0,066 (E) rolling process 7213 20 00 Bars and rods, hot-rolled, in irregularly wound coils, 0,038 1,364 (C) of non-alloy free-cutting steel (excl. bars and rods 0,475 (D) containing indentations, ribs, grooves or other 0,066 (E) deformations produced during the rolling process) 7213 91 10 Bars and rods, hot-rolled, of the type used for 0,038 1,364 (C) concrete reinforcement, smooth, of iron or non-alloy 0,475 (D) steel, in irregularly wound coils, of circular cross- 0,066 (E) section measuring < 14 mm in diameter 7213 91 20 Bars and rods, hot-rolled, of the type used for tyre 0,038 1,364 (C) cord, smooth, of iron or non-alloy steel, in irregularly 0,475 (D) wound coils 0,066 (E) 7213 91 41 Bars and rods, hot-rolled, of iron or non-alloy steel, in 0,038 1,364 (C) irregularly wound coils, containing by weight 0,475 (D) ≤ 0,06 % of carbon, of circular cross-section 0,066 (E) measuring < 14 mm in diameter (excl. free-cutting steel, bars and rods, hot-rolled, for concrete reinforcement and tyre cord, and bars and rods, hot- rolled, containing indentations, ribs, grooves or other deformations produced during the rolling process) 7213 91 49 Bars and rods, hot-rolled, of iron or non-alloy steel, in 0,038 1,364 (C) irregularly wound coils, containing by weight 0,475 (D) > 0,06 % and < 0,25 % of carbon, of circular cross- 0,066 (E) section, measuring < 14 mm in diameter (excl. of free- cutting steel, bars and rods, hot-rolled, for concrete reinforcement and tyre cord and bars and rods, hot- rolled, containing indentations, ribs, grooves or other deformations produced during the rolling process) 7213 91 70 Bars and rods, hot-rolled, in irregularly wound coils, 0,038 1,364 (C) of iron or non-alloy steel, containing by weight 0,475 (D) ≥ 0,25 % but ≤ 0,75 % carbon, of circular cross- 0,066 (E) section measuring < 14 mm in diameter (excl. of free- cutting steel, and bars and rods, smooth, for concrete reinforcement and tyre cord, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process) 24/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7213 91 90 Bars and rods, hot-rolled, of iron or non-alloy steel, in 0,038 1,364 (C) irregularly wound coils, containing by weight 0,475 (D) > 0,75 % of carbon, of circular cross-section 0,066 (E) measuring < 14 mm in diameter (excl. of free-cutting steel, bars and rods, smooth, for tyre cord and bars and rods with indentations, ribs, grooves and other deformations produced during the rolling process) 7213 99 10 Bars and rods, of iron or non-alloy steel, hot-rolled, in 0,038 1,364 (C) irregularly wound coils, containing by weight 0,475 (D) < 0,25 % carbon (excl. products of circular cross- 0,066 (E) section measuring < 14 mm in diameter, bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process) 7213 99 90 Bars and rods, hot-rolled, in irregularly wound coils, 0,038 1,364 (C) of iron or non-alloy steel, containing by weight 0,475 (D) ≥ 0,25 % carbon (excl. products of circular cross- 0,066 (E) section measuring < 14 mm diameter, bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process) 7214 10 00 Bars and rods, of iron or non-alloy steel, not further 0,303 1,629 (C) worked than forged (excl. in irregularly wound coils) 0,740 (D) 0,331 (E) 7214 20 00 Bars and rods, of iron or non-alloy steel, with 0,038 1,364 (C) indentations, ribs, groves or other deformations 0,475 (D) produced during the rolling process 0,066 (E) 7214 30 00 Bars and rods, of non-alloy free-cutting steel, not 0,038 1,364 (C) further worked than hot-rolled, hot-drawn or hot- 0,475 (D) extruded (excl. containing indentations, ribs, grooves 0,066 (E) or other deformations produced during the rolling process or twisted after rolling) 7214 91 10 Bars and rods of iron or non-alloy steel, not further 0,038 1,364 (C) worked than hot-rolled, hot-drawn or hot-extruded, 0,475 (D) containing by weight < 0,25 % of carbon, of 0,066 (E) rectangular "other than square" cross-section (excl. those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 25/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7214 91 90 Other bars and rods of iron or non-alloy steel, only 0,038 1,364 (C) hot-rolled, only hot-drawn or only hot-extruded, 0,475 (D) containing by weight ≥ 0,25 % of carbon, of 0,066 (E) rectangular "other than square" cross-section (excl. those with indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling, and free-cutting steel) 7214 99 10 Bars and rods of the type used for concrete 0,038 1,364 (C) reinforcement, smooth, of iron or non-alloy steel, 0,475 (D) only hot-rolled, only hot-drawn or only hot-extruded, 0,066 (E) containing < 0,25 % of carbon, of square cross- section or of a cross-section other than rectangular 7214 99 31 Bars and rods of iron or non-alloy steel, only hot- 0,038 1,364 (C) rolled, hot-drawn or hot-extruded, containing 0,475 (D) < 0,25 % of carbon, of circular cross-section, of a 0,066 (E) maximum diameter of ≥ 80 mm (other than of free- cutting steel, smooth bars and rods, for reinfoced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) 7214 99 39 Bars and rods of iron or non-alloy steel, only hot- 0,038 1,364 (C) rolled, hot-drawn or hot-extruded, containing 0,475 (D) < 0,25 % of carbon, of circular cross-section of a 0,066 (E) maximum diameter of < 80 mm (other than of free- cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) 7214 99 50 Bars and rods of iron or non-alloy steel, only hot- 0,038 1,364 (C) rolled, hot-drawn or hot-extruded, containing by 0,475 (D) weight < 0,25 % of carbon, of square cross-section or 0,066 (E) of a cross-section other than square or circular (other than of free-cutting steel, smooth bars and rods, for reinforced concrete, or bars and rods containing indentations, ribs, grooves or other deformations produced during the rolling process, or wound after rolling) 7214 99 71 Bars and rods of iron or non-alloy steel, only hot- 0,038 1,364 (C) rolled, only hot-drawn or only hot-extruded, 0,475 (D) containing by weight ≥ 0,25 % carbon, of circular 0,066 (E) cross-section measuring ≥ 80 mm in diameter (excl. bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel) 26/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7214 99 79 Bars and rods of iron or non-alloy steel, only hot- 0,038 1,364 (C) rolled, only hot-drawn or only hot-extruded, 0,475 (D) containing by weight ≥ 0,25 % carbon, of circular 0,066 (E) cross-section measuring < 80 mm in diameter (excl. bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process, twisted after rolling, and of free-cutting steel) 7214 99 95 Bars and rods of iron or non-alloy steel, only hot- 0,038 1,364 (C) rolled, only hot-drawn or only hot-extruded, 0,475 (D) containing by weight ≥ 0,25 % carbon, of square or of 0,066 (E) other than rectangular or circular cross-section (excl. indentations, ribs, grooves or other deformations produced during the rolling process, twisted fter rolling, and of free-cutting steel) 7215 10 00 Bars and rods, of non-alloy free-cutting steel, not 0,038 1,364 (C) further worked than cold-formed or cold-finished 0,475 (D) 0,066 (E) 7215 50 11 Other bars and rods of iron or non-alloy steel, not 0,038 1,364 (C) further worked than cold-formed or cold-finished, 0,475 (D) containing by weight < 0,25 % of carbon of 0,066 (E) rectangular "other than square" cross-section (excl. those of free-cutting steel) 7215 50 19 Other bars and rods of iron or non-alloy steel, not 0,038 1,364 (C) further worked than cold-formed or cold-finished, 0,475 (D) containing by weight < 0,25 % of carbon, of square or 0,066 (E) other than rectangular cross-section (excl. those of free-cutting steel) 7215 50 80 Other bars and rods of iron or non-alloy steel, not 0,038 1,364 (C) further worked than cold-formed or cold-finished, 0,475 (D) containing by weight ≥ 0,25 % of carbon (excl. those 0,066 (E) of free-cutting steel) 7215 90 00 Bars or rods, of iron or non-alloy steel, cold-formed 0,038 1,364 (C) or cold-finished and further worked or hot-formed 0,475 (D) and further worked, n.e.s. 0,066 (E) 7216 10 00 U, I or H sections of iron or non-alloy steel, not 0,038 1,364 (C) further worked than hot-rolled, hot-drawn or 0,475 (D) extruded, of a height of < 80 mm 0,066 (E) 7216 21 00 L sections of iron or non-alloy steel, not further 0,038 1,364 (C) worked than hot-rolled, hot-drawn or extruded, of a 0,475 (D) height of < 80 mm 0,066 (E) 7216 22 00 T sections of iron or non-alloy steel, not further 0,038 1,364 (C) worked than hot-rolled, hot-drawn or extruded, of a 0,475 (D) height of < 80 mm 0,066 (E) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 27/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7216 31 10 U sections of iron or non-alloy steel, simply hot- 0,038 1,364 (C) rolled, hot-drawn or extruded, of a height ≥ 80 mm 0,475 (D) but ≤ 220 mm 0,066 (E) 7216 31 90 U sections of iron or non-alloy steel, simply hot- 0,038 1,364 (C) rolled, hot-drawn or extruded, of a height > 220 mm 0,475 (D) 0,066 (E) 7216 32 11 I sections with parallel flange faces, of iron or non- 0,038 1,364 (C) alloy steel, simply hot-rolled, hot-drawn or extruded, 0,475 (D) of a height ≥ 80 mm but ≤ 220 mm 0,066 (E) 7216 32 19 I sections of iron or non-alloy steel, simply hot-rolled, 0,038 1,364 (C) hot-drawn or extruded, of a height ≥ 80 mm but 0,475 (D) ≤ 220 mm (excl. 7216.32.11) 0,066 (E) 7216 32 91 I sections with parallel flange faces, of iron or non- 0,038 1,364 (C) alloy steel, simply hot-rolled, hot-drawn or extruded, 0,475 (D) of a height > 220 mm 0,066 (E) 7216 32 99 I sections of iron or non-alloy steel, simply hot-rolled, 0,038 1,364 (C) hot-drawn or extruded, of a height > 220 mm (excl. 0,475 (D) 7216.32.91) 0,066 (E) 7216 33 10 H sections of iron or non-alloy steel, simply hot- 0,038 1,364 (C) rolled, hot-drawn or extruded, of a height ≥ 80 mm 0,475 (D) but ≤ 180 mm 0,066 (E) 7216 33 90 H sections of iron or non-alloy steel, simply hot- 0,038 1,364 (C) rolled, hot-drawn or extruded, of a height > 180 mm 0,475 (D) 0,066 (E) 7216 40 10 L sections of iron or non-alloy steel, not further 0,038 1,364 (C) worked than hot-rolled, hot-drawn or extruded, of a 0,475 (D) height of ≥ 80 mm 0,066 (E) 7216 40 90 T sections of iron or non-alloy steel, not further 0,038 1,364 (C) worked than hot-rolled, hot-drawn or extruded, of a 0,475 (D) height of ≥ 80 mm 0,066 (E) 7216 50 10 Sections of iron or non-alloy steel, not further worked 0,038 1,364 (C) than hot-rolled, hot-drawn or hot-extruded, with a 0,475 (D) cross-section which is capable of being enclosed in a 0,066 (E) square the side of which is ≤ 80 mm (excl. U, I, H, L or T sections) 7216 50 91 Bulb sections "bulb flat", only hot-rolled, hot-drawn 0,038 1,364 (C) or hot-extruded 0,475 (D) 0,066 (E) 7216 50 99 Profile of iron or non-alloy steel, only hot-rolled, hot- 0,038 1,364 (C) drawn or hot-extruded (other than with a cross- 0,475 (D) section which is capable of being enclosed in a square 0,066 (E) the side of which is ≤ 80 mm, and U-, I-, H-, L- or T-sections and ribbed sections [ribbed steel]) 28/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7216 61 10 c, l, u, z, omega or open-ended sections of iron or 0,038 1,364 (C) non-alloy steel, simply cold-formed or cold-finished, 0,475 (D) obtained from flat-rolled products 0,066 (E) 7216 61 90 Angles, shapes and sections (other than c, l, u, z, 0,038 1,364 (C) omega or open-ended sections) of iron or non-alloy 0,475 (D) steel, simply cold-formed or cold-finished, obtained 0,066 (E) from flat-rolled products 7216 69 00 Angles, shapes and sections, of iron or non-alloy steel, 0,038 1,364 (C) not further worked than cold-formed or cold-finished 0,475 (D) (excl. profiled sheet) 0,066 (E) 7216 91 10 Sheets of iron or non-alloy steel, cold-formed or cold 0,038 1,364 (C) finished, profiled "ribbed" 0,475 (D) 0,066 (E) 7216 91 80 Angles, shapes and sections, of iron or non-alloy steel, 0,038 1,364 (C) cold-formed or cold-finished from flat-rolled 0,475 (D) products and further worked (excl. profiled sheet) 0,066 (E) 7216 99 00 Angles, shapes and sections, of iron or non-alloy steel, 0,038 1,364 (C) cold-formed or cold-finished and further worked, or 0,475 (D) hot-forged, or hot-formed by other means and further 0,066 (E) worked, n.e.s. (excl. from flat-rolled products) 7217 10 10 Wire of iron or non-alloy steel, in coils, containing by 0,038 1,364 (C) weight < 0,25 % carbon, not plated or coated, 0,475 (D) whether or not polished, with a maximum cross- 0,066 (E) sectional dimension of < 0,8 mm 7217 10 31 Wire of iron or non-alloy steel, in coils, containing by 0,038 1,364 (C) weight < 0,25 % carbon, with indentations, ribs, 0,475 (D) grooves or other deformations produced during the 0,066 (E) rolling process, not plated or coated, with a maximum cross-sectional dimension of ≥ 0,8 mm 7217 10 39 Wire of iron or non-alloy steel, in coils, containing by 0,038 1,364 (C) weight < 0,25 % carbon, not plated or coated, with a 0,475 (D) maximum cross-sectional dimension of ≥ 0,8 mm 0,066 (E) (without indentations, ribs, grooves or other deformations produced during the rolling process) 7217 10 50 Wire of iron or non-alloy steel, in coils, containing by 0,038 1,364 (C) weight ≥ 0,25 % but < 0,6 % carbon, not plated or 0,475 (D) coated, whether or not polished (excl. hot-rolled bars 0,066 (E) and rods) 7217 10 90 Wire of iron or non-alloy steel, in coils, containing by 0,038 1,364 (C) weight ≥ 0,6 % carbon, not plated or coated, whether 0,475 (D) or not polished (excl. hot-rolled bars and rods) 0,066 (E) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 29/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7217 20 10 Wire of iron or non-alloy steel, in coils, containing by 0,071 1,397 (C) weight < 0,25 % carbon, plated or coated with zinc, 0,508 (D) with a maximum cross-sectional dimension of 0,099 (E) < 0,8 mm 7217 20 30 Wire of iron or non-alloy steel, in coils, containing by 0,071 1,397 (C) weight < 0,25 % carbon, plated or coated with zinc, 0,508 (D) with a maximum cross-sectional dimension of 0,099 (E) < 0,8 mm (excl. bars and rods) 7217 20 50 Wire of iron or non-alloy steel, in coils, containing by 0,071 1,397 (C) weight ≥ 0,25 % but < 0,6 % carbon, plated or coated 0,508 (D) with zinc (excl. bars and rods) 0,099 (E) 7217 20 90 Wire of iron or non-alloy steel, in coils, containing by 0,071 1,397 (C) weight ≥ 0,6 % carbon, plated or coated with zinc 0,508 (D) (excl. bars and rods) 0,099 (E) 7217 30 41 Wire of iron or non-alloy steel, in coils, containing by 0,071 1,397 (C) weight < 0,25 % carbon, copper-coated (excl. bars and 0,508 (D) rods) 0,099 (E) 7217 30 49 Wire of iron or non-alloy steel, in coils, containing by 0,071 1,397 (C) weight < 0,25 % carbon, plated or coated with base 0,508 (D) metals (excl. products plated or coated with zinc or 0,099 (E) copper and bars and rods) 7217 30 50 Wire of iron or non-alloy steel, in coils, containing by 0,071 1,397 (C) weight ≥ 0,25 % but < 0,6 % carbon, plated or coated 0,508 (D) with base metals (excl. products plated or coated with 0,099 (E) zinc, and bars and rods) 7217 30 90 Wire of iron or non-alloy steel, in coils, containing by 0,071 1,397 (C) weight ≥ 0,6 % carbon, plated or coated with base 0,508 (D) metals (excl. products plated or coated with zinc, and 0,099 (E) bars and rods) 7217 90 20 Wire of iron or non-alloy steel, in coils, containing by 0,071 1,397 (C) weight < 0,25 % carbon, plated or coated (excl. 0,508 (D) products plated or coated with base metals and bars 0,099 (E) and rods) 7217 90 50 Wire of iron or non-alloy steel, in coils, containing by 0,071 1,397 (C) weight ≥ 0,25 % but < 0,6 % carbon, plated or coated 0,508 (D) (excl. products plated or coated with with base metals, 0,099 (E) and bars and rods) 7217 90 90 Wire of iron or non-alloy steel, in coils, containing by 0,071 1,397 (C) weight ≥ 0,6 % carbon, plated or coated (excl. 0,508 (D) products plated or coated with base metals, and bars 0,099 (E) and rods) 7218 10 00 Steel, stainless, in ingots and other primary forms 0,358 1,419 (1) (excl. waste and scrap in ingot form, and products 1,381 (2) obtained by continuous casting) 30/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7218 91 10 Semi-finished products of stainless steel, of 0,128 1,189 (1) rectangular "other than square" cross-section, 1,151 (2) containing by weight ≥ 2,5 % nickel 7218 91 80 Semi-finished products of stainless steel, of 0,128 1,189 (1) rectangular "other than square" cross-section, 1,151 (2) containing by weight < 2,5 nickel 7218 99 11 Semi-finished products of stainless steel, of square 0,128 1,189 (1) cross-section, rolled or obtained by continuous 1,151 (2) casting 7218 99 19 Semi-finished products of stainless steel, of square 0,358 1,419 (1) cross-section, forged 1,381 (2) 7218 99 20 Semi-finished products of stainless steel, of circular 0,128 1,189 (1) cross-section or of cross-section other than square or 1,151 (2) rectangular, rolled or obtained by continuous casting 7218 99 80 Semi-finished products of stainless steel, forged (excl. 0,358 1,419 (1) products of square or rectangular cross-section) 1,381 (2) 7219 11 00 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) ≥ 600 mm, not further worked than hot-rolled, in 1,151 (2) coils, of a thickness of > 10 mm 7219 12 10 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) ≥ 600 mm, not further worked than hot-rolled, in 1,151 (2) coils, of a thickness of ≥ 4,75 mm but ≤ 10 mm, containing by weight ≥ 2,5 nickel 7219 12 90 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) ≥ 600 mm, not further worked than hot-rolled, in 1,151 (2) coils, of a thickness of ≥ 4,75 mm but ≤ 10 mm, containing by weight < 2,5 nickel 7219 13 10 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) ≥ 600 mm, not further worked than hot-rolled, in 1,151 (2) coils, of a thickness of ≥ 3 mm but ≤ 4,75 mm, containing by weight ≥ 2,5 nickel 7219 13 90 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) ≥ 600 mm, not further worked than hot-rolled, in 1,151 (2) coils, of a thickness of ≥ 3 mm but ≤ 4,75 mm, containing by weight < 2,5 nickel 7219 14 10 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) ≥ 600 mm, not further worked than hot-rolled, in 1,151 (2) coils, of a thickness of < 3 mm, containing by weight ≥ 2,5 nickel 7219 14 90 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) ≥ 600 mm, not further worked than hot-rolled, in 1,151 (2) coils, of a thickness of < 3 mm, containing by weight < 2,5 nickel ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 31/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7219 21 10 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) ≥ 600 mm, not further worked than hot-rolled, not in 1,151 (2) coils, of a thickness of > 10 mm, containing by weight ≥ 2,5 nickel 7219 21 90 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) ≥ 600 mm, not further worked than hot-rolled, not in 1,151 (2) coils, of a thickness of > 10 mm, containing by weight < 2,5 nickel 7219 22 10 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) ≥ 600 mm, not further worked than hot-rolled, not in 1,151 (2) coils, of a thickness of ≥ 4,75 mm but ≤ 10 mm, containing by weight ≥ 2,5 % nickel 7219 22 90 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) ≥ 600 mm, not further worked than hot-rolled, not in 1,151 (2) coils, of a thickness of ≥ 4,75 mm but ≤ 10 mm, containing by weight < 2,5 % nickel 7219 23 00 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) ≥ 600 mm, not further worked than hot-rolled, not in 1,151 (2) coils, of a thickness of ≥ 3 mm and < 4,75 mm 7219 24 00 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) ≥ 600 mm, not further worked than hot-rolled, not in 1,151 (2) coils, of a thickness of < 3 mm 7219 31 00 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) ≥ 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of ≥ 4,75 mm 7219 32 10 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) ≥ 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of ≥ 3 mm but ≤ 4,75 mm, containing by weight ≥ 2,5 % nickel 7219 32 90 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) ≥ 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of ≥ 3 mm but ≤ 4,75 mm, containing by weight < 2,5 % nickel 7219 33 10 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) ≥ 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight ≥ 2,5 % nickel 7219 33 90 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) ≥ 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of > 1 mm but < 3 mm, containing by weight < 2,5 % nickel 32/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7219 34 10 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) ≥ 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of ≥ 0,5 mm but ≤ 1 mm, containing by weight ≥ 2,5 % nickel 7219 34 90 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) ≥ 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of ≥ 0,5 mm but ≤ 1 mm, containing by weight < 2,5 % nickel 7219 35 10 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) ≥ 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of < 0,5 mm, containing by weight ≥ 2,5 % nickel 7219 35 90 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) ≥ 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of < 0,5 mm, containing by weight < 2,5 % nickel 7219 90 20 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) ≥ 600 mm, hot-rolled or cold-rolled "cold-reduced" 1,230 (2) and further worked, perforated 7219 90 80 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) ≥ 600 mm, hot-rolled or cold-rolled "cold-reduced" 1,230 (2) and further worked, non-perforated 7220 11 00 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) < 600 mm, not further worked than hot-rolled, of a 1,151 (2) thickness of ≥ 4,75 mm 7220 12 00 Flat-rolled products of stainless steel, of a width of 0,073 1,189 (1) < 600 mm, not further worked than hot-rolled, of a 1,151 (2) thickness of < 4,75 mm 7220 20 21 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) < 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of ≥ 3 mm and containing by weight ≥ 2,5 % nickel 7220 20 29 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) < 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of ≥ 3 mm and containing by weight < 2,5 % nickel 7220 20 41 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) < 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight ≥ 2,5 % nickel ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 33/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7220 20 49 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) < 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of > 0,35 mm but < 3 mm, and containing by weight < 2,5 % nickel 7220 20 81 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) < 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of ≤ 0,35 mm and containing by weight ≥ 2,5 % nickel 7220 20 89 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) < 600 mm, not further worked than cold-rolled 1,230 (2) "cold-reduced", of a thickness of ≤ 0,35 mm and containing by weight < 2,5 % nickel 7220 90 20 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) < 600 mm, hot-rolled or cold-rolled "cold-reduced" 1,230 (2) and further worked, perforated 7220 90 80 Flat-rolled products of stainless steel, of a width of 0,109 1,270 (1) < 600 mm, hot-rolled or cold-rolled "cold-reduced" 1,230 (2) and further worked, non-perforated 7221 00 10 Bars and rods of stainless steel, hot-rolled, in 0,109 1,225 (1) irregularly wound coils, containing by weight ≥ 2,5 % 1,187 (2) nickel 7221 00 90 Bars and rods of stainless steel, hot-rolled, in 0,109 1,225 (1) irregularly wound coils, containing by weight < 2,5 % 1,187 (2) nickel 7222 11 11 Bars and rods of stainless steel, not further worked 0,109 1,225 (1) than hot-rolled, hot-drawn or extruded, of circular 1,187 (2) cross-section of a diameter of ≥ 800 mm, containing by weight ≥ 2,5 % nickel 7222 11 19 Bars and rods of stainless steel, not further worked 0,109 1,225 (1) than hot-rolled, hot-drawn or extruded, of circular 1,187 (2) cross-section of a diameter of ≥ 800 mm, containing by weight < 2,5 % nickel 7222 11 81 Bars and rods of stainless steel, not further worked 0,109 1,225 (1) than hot-rolled, hot-drawn or extruded, of circular 1,187 (2) cross-section measuring < 80 mm and containing by weight ≥ 2,5 % nickel 7222 11 89 Bars and rods of stainless steel, not further worked 0,109 1,225 (1) than hot-rolled, hot-drawn or extruded, of circular 1,187 (2) cross-section measuring < 80 mm and containing by weight < 2,5 % nickel 7222 19 10 Bars and rods of stainless steel, not further worked 0,109 1,225 (1) than hot-rolled, hot-drawn or extruded, containing by 1,187 (2) weight ≥ 2,5 % nickel (excl. such products of circular cross-section) 34/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7222 19 90 Bars and rods of stainless steel, not further worked 0,109 1,225 (1) than hot-rolled, hot-drawn or extruded, containing by 1,187 (2) weight < 2,5 % nickel (excl. such products of circular cross-section) 7222 20 11 Bars and rods of stainless steel, of circular cross- 0,109 1,225 (1) section of a diameter ≥ 80 mm, simply cold-formed 1,187 (2) or cold-finished, containing by weight ≥ 2,5 % nickel 7222 20 19 Bars and rods of stainless steel, of circular cross- 0,109 1,225 (1) section of a diameter ≥ 80 mm, simply cold-formed 1,187 (2) or cold-finished, containing by weight < 2,5 % nickel 7222 20 21 Bars and rods of stainless steel, not further worked 0,109 1,225 (1) than cold-formed or cold-finished, of circular cross- 1,187 (2) section measuring ≥ 25 mm but < 80 mm and containing by weight ≥ 2,5 % nickel 7222 20 29 Bars and rods of stainless steel, not further worked 0,109 1,225 (1) than cold-formed or cold-finished, of circular cross- 1,187 (2) section measuring ≥ 25 mm but < 80 mm and containing by weight < 2,5 % nickel 7222 20 31 Bars and rods of stainless steel, not further worked 0,109 1,225 (1) than cold-formed or cold-finished, of circular cross- 1,187 (2) section measuring < 25 mm and containing by weight ≥ 2,5 % nickel 7222 20 39 Bars and rods of stainless steel, not further worked 0,109 1,225 (1) than cold-formed or cold-finished, of circular cross- 1,187 (2) section measuring < 25 mm and containing by weight < 2,5 % nickel 7222 20 81 Bars and rods of stainless steel, not further worked 0,109 1,225 (1) than cold-formed or cold-finished, containing by 1,187 (2) weight ≥ 2,5 % nickel (excl. such products of circular cross-section) 7222 20 89 Bars and rods of stainless steel, not further worked 0,109 1,225 (1) than cold-formed or cold-finished, containing by 1,187 (2) weight < 2,5 % nickel (excl. such products of circular cross-section) 7222 30 51 Other bars and rods of stainless steel, containing by 0,303 1,419 (1) weight ≥ 2,5 % of nickel, forged 1,381 (2) 7222 30 91 Other bars and rods of stainless steel, containing by 0,303 1,419 (1) weight < 2,5 % of nickel, forged 1,381 (2) 7222 30 97 Bars and rods of stainless steel, cold-formed or cold- 0,303 1,419 (1) finished and further worked, or hot-formed and 1,381 (2) further worked, n.e.s. (excl. forged products) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 35/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7222 40 10 Angles, shapes and sections of stainless steel, only 0,109 1,225 (1) hot-rolled, only hot-drawn or only extruded 1,187 (2) 7222 40 50 Angles, shapes and sections of stainless steel, not 0,109 1,225 (1) further worked than cold-formed or cold-finished 1,187 (2) 7222 40 90 Angles, shapes and sections of stainless steel, cold- 0,109 1,225 (1) formed or cold-finished and further worked, or not 1,187 (2) further worked than forged, or forged, or hot-formed by other means and further worked, n.e.s. 7223 00 11 Wire of stainless steel, in coils, containing by weight 0,109 1,225 (1) 28 % to 31 % nickel and 20 % to 22 % chromium 1,187 (2) (excl. bars and rods) 7223 00 19 Wire of stainless steel, in coils, containing by weight 0,109 1,225 (1) ≥ 2,5 % nickel (excl. such products containing 28 % to 1,187 (2) 31 % nickel and 20 % to 22 % chromium, and bars and rods) 7223 00 91 Wire of stainless steel, in coils, containing by weight 0,109 1,225 (1) < 2,5 % nickel, 13 % to 25 % chromium and 3,5 % to 1,187 (2) 6 % aluminium (excl. bars and rods) 7223 00 99 Wire of stainless steel, in coils, containing by weight 0,109 1,225 (1) < 2,5 % nickel (excl. such products containing 13 % to 1,187 (2) 25 % chromium and 3,5 % to 6 % aluminium, and bars and rods) 7224 10 10 Ingots and other primary forms, of tool steel 0,453 (F) 1,807 (F)(1) 0,330 (G) 0,982 (G)(1) 0,330 (H) 0,640 (H)(1) 0,358 (J) 1,180 (J)(1) 1,640 (F)(2) 0,969 (G)(2) 0,628 (H)(2) 1,148 (J)(2) 7224 10 90 Steel, alloy, other than stainless, in ingots or other 0,453 (F) 1,807 (F)(1) primary forms (excl. of tool steel, waste and scrap in 0,330 (G) 0,982 (G)(1) ingot form and products obtained by continuous 0,330 (H) 0,640 (H)(1) casting) 0,358 (J) 1,180 (J)(1) 1,640 (F)(2) 0,969 (G)(2) 0,628 (H)(2) 1,148 (J)(2) 7224 90 02 Semi-finished products of tool steel 0,223 (F) 1,577 (F)(1) 0,100 (G) 0,752 (G)(1) 0,100 (H) 0,410 (H)(1) 0,128 (J) 0,950 (J)(1) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 36/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7224 90 03 Semi-finished products of high-speed steel, of square 0,223 (F) 1,577 (F)(1) or rectangular cross-section, hot-rolled or obtained by 0,100 (G) 0,752 (G)(1) continuous casting the width measuring < twice the 0,100 (H) 0,410 (H)(1) thickness 0,128 (J) 0,950 (J)(1) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7224 90 05 Semi-finished products of steel containing by weight 0,223 (F) 1,577 (F)(1) ≤ 0,7 % of carbon, 0,5 % to 1,2 % of manganese, 0,100 (G) 0,752 (G)(1) 0,6 % to 2,3 % of silicon, or of steel containing by 0,100 (H) 0,410 (H)(1) weight ≥ 0,0008 % of boron with any other element 0,128 (J) 0,950 (J)(1) < the minimum content referred to in Note 1 f to 1,409 (F)(2) chapter 72, of square or rectangular cross-section, hot 0,739 (G)(2) rolled or obtained by continuous casting, the width 0,397 (H)(2) measuring < twice the thickness 0,918 (J)(2) 7224 90 07 Semi-finished products of alloy steel other than 0,223 (F) 1,577 (F)(1) stainless steel, of square or rectangular cross-section, 0,100 (G) 0,752 (G)(1) hot-rolled or obtained by continuous casting, the 0,100 (H) 0,410 (H)(1) width measuring < twice the thickness (excl. of tool 0,128 (J) 0,950 (J)(1) steel, high-speed steel and articles of subheading 1,409 (F)(2) 7224 90 05) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7224 90 14 Semi-finished products of alloy steel other than 0,223 (F) 1,577 (F)(1) stainless steel, of square or rectangular cross-section, 0,100 (G) 0,752 (G)(1) hot-rolled or obtained by continuous casting, the 0,100 (H) 0,410 (H)(1) width measuring ≥ twice the thickness (excl. of tool 0,128 (J) 0,950 (J)(1) steel) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7224 90 18 Semi-finished products of alloy steel other than 0,453 (F) 1,807 (F)(1) stainless steel, of square or rectangular cross-section, 0,330 (G) 0,982 (G)(1) forged (excl. of tool steel) 0,330 (H) 0,640 (H)(1) 0,358 (J) 1,180 (J)(1) 1,640 (F)(2) 0,969 (G)(2) 0,628 (H)(2) 1,148 (J)(2) 7224 90 31 Semi-finished products of steel containing by weight 0,223 (F) 1,577 (F)(1) 0,9 % to 1,15 % carbon, 0,5 % to 2 % of chromium 0,100 (G) 0,752 (G)(1) and, if present, ≤ 0,5 % of molybdenum, cut into 0,100 (H) 0,410 (H)(1) shapes other than square or rectangular, hot-rolled or 0,128 (J) 0,950 (J)(1) obtained by continuous casting 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7224 90 38 Semi-finished products of alloy steel, other than 0,223 (F) 1,577 (F)(1) stainless steel, cut into shapes other than square or 0,100 (G) 0,752 (G)(1) rectangular, hot-rolled or obtained by continuous 0,100 (H) 0,410 (H)(1) casting (excl. of tool steel and products containing by 0,128 (J) 0,950 (J)(1) weight 0,9 % to 1,15 % of carbon, 0,5 % to 2 % of 1,409 (F)(2) chromium and, if present, ≤ 0,5 % of molybdenum) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 37/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7224 90 90 Semi-finished products of alloy steel, other than 0,453 (F) 1,807 (F)(1) stainless steel, forged (excl. of tool steel and products 0,330 (G) 0,982 (G)(1) of square or rectangular, circular or polygamol cross- 0,330 (H) 0,640 (H)(1) section) 0,358 (J) 1,180 (J)(1) 1,640 (F)(2) 0,969 (G)(2) 0,628 (H)(2) 1,148 (J)(2) 7225 11 00 Flat-rolled products of silicon-electrical steel, of a 0,073 1,779 (C) width of ≥ 600 mm, grain-oriented 0,635 (D) 0,109 (E) 7225 19 10 Flat-rolled products of silicon-electrical steel, of a 0,073 1,399 (C) width of ≥ 600 mm, hot-rolled 0,510 (D) 0,101 (E) 7225 19 90 Flat-rolled products of silicon-electrical steel, of a 0,109 1,488 (C) width of ≥ 600 mm, cold-rolled "cold-reduced", non- 0,563 (D) grain-oriented 0,138 (E) 7225 30 10 Flat-rolled products of tool steel, of a width of 0,073 1,577 (F)(1) ≥ 600 mm, not further worked than hot-rolled, in 0,752 (G)(1) coils 0,410 (H)(1) 0,950 (J)(1) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7225 30 30 Flat-rolled products of high-speed steel, of a width of 0,073 1,577 (F)(1) ≥ 600 mm, not further worked than hot-rolled, in 0,752 (G)(1) coils 0,410 (H)(1) 0,950 (J)(1) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7225 30 90 Flat-rolled products of alloy steel other than stainless, 0,073 1,577 (F)(1) of a width of ≥ 600 mm, not further worked than 0,752 (G)(1) hot-rolled, in coils (excl. products of tool steel, high- 0,410 (H)(1) speed steel or silicon-electrical steel) 0,950 (J)(1) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7225 40 12 Flat-rolled products of tool steel, of a width of 0,073 1,577 (F)(1) ≥ 600 mm, not further worked than hot-rolled, not in 0,752 (G)(1) coils 0,410 (H)(1) 0,950 (J)(1) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7225 40 15 Flat-rolled products of high-speed steel, of a width of 0,073 1,577 (F)(1) ≥ 600 mm, not further worked than hot-rolled, not in 0,752 (G)(1) coils 0,410 (H)(1) 0,950 (J)(1) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 38/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7225 40 40 Flat-rolled products of alloy steel other than stainless, 0,073 1,577 (F)(1) of a width of ≥ 600 mm, not further worked than 0,752 (G)(1) hot-rolled, not in coils, of a thickness of > 10 mm 0,410 (H)(1) (excl. products of tool steel, high-speed steel or 0,950 (J)(1) silicon-electrical steel) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7225 40 60 Flat-rolled products of alloy steel other than stainless, 0,073 1,577 (F)(1) of a width of ≥ 600 mm, not further worked than 0,752 (G)(1) hot-rolled, not in coils, of a thickness of ≥ 4,75 mm 0,410 (H)(1) but ≤ 10 mm (excl. products of tool steel, high-speed 0,950 (J)(1) steel or silicon-electrical steel) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7225 40 90 Flat-rolled products of alloy steel other than stainless, 0,073 1,577 (F)(1) of a width of ≥ 600 mm, not further worked than 0,752 (G)(1) hot-rolled, not in coils, of a thickness of < 4,75 mm 0,410 (H)(1) (excl. products of tool steel, high-speed steel or 0,950 (J)(1) silicon-electrical steel) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7225 50 20 Flat-rolled products of high-speed steel, of a width of 0,109 1,673 (F)(1) ≥ 600 mm, not further worked than cold-rolled 0,815 (G)(1) "cold-reduced" 0,460 (H)(1) 1,021 (J)(1) 1,499 (F)(2) 0,801 (G)(2) 0,446 (H)(2) 0,987 (J)(2) 7225 50 80 Flat-rolled products of alloy steel other than stainless, 0,109 1,673 (F)(1) of a width of ≥ 600 mm, not further worked than 0,815 (G)(1) cold-rolled "cold-reduced" (excl. products of high- 0,460 (H)(1) speed steel or silicon-electrical steel) 1,021 (J)(1) 1,499 (F)(2) 0,801 (G)(2) 0,446 (H)(2) 0,987 (J)(2) 7225 91 00 Flat-rolled products of alloy steel other than stainless, 0,142 1,706 (F)(1) of a width of ≥ 600 mm, hot-rolled or cold-rolled 0,848 (G)(1) "cold-reduced" and electrolytically plated or coated 0,493 (H)(1) with zinc (excl. products of silicon-electrical steel) 1,054 (J)(1) 1,532 (F)(2) 0,835 (G)(2) 0,480 (H)(2) 1,021 (J)(2) 7225 92 00 Flat-rolled products of alloy steel other than stainless, 0,142 1,706 (F)(1) of a width of ≥ 600 mm, hot-rolled or cold-rolled 0,848 (G)(1) "cold-reduced" and plated or coated with zinc (excl. 0,493 (H)(1) electrolytically plated or coated and products of 1,054 (J)(1) silicon-electrical steel) 1,532 (F)(2) 0,835 (G)(2) 0,480 (H)(2) 1,021 (J)(2) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 39/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7225 99 00 Flat-rolled products of alloy steel other than stainless, 0,142 1,706 (F)(1) of a width of ≥ 600 mm, hot-rolled or cold-rolled 0,848 (G)(1) "cold-reduced" and further worked (excl. plated or 0,493 (H)(1) coated with zinc and products of silicon-electrical 1,054 (J)(1) steel) 1,532 (F)(2) 0,835 (G)(2) 0,480 (H)(2) 1,021 (J)(2) 7226 11 00 Flat-rolled products of silicon-electrical steel, of a 0,073 1,779 (C) width of < 600 mm, hot-rolled or cold-rolled "cold- 0,635 (D) reduced", grain-oriented 0,109 (E) 7226 19 10 Flat-rolled products of silicon-electrical steel, of a 0,073 1,399 (C) width of < 600 mm, not further worked than hot- 0,510 (D) rolled 0,101 (E) 7226 19 80 Flat-rolled products of silicon-electrical steel, of a 0,109 1,488 (C) width of < 600 mm, cold-rolled "cold-reduced", 0,563 (D) whether or not further worked, or hot-rolled and 0,138 (E) further worked, non-grain-oriented 7226 20 00 Flat-rolled products of high-speed steel, of a width of 0,073 1,577 (F)(1) ≤ 600 mm, hot-rolled or cold-rolled "cold-reduced" 0,752 (G)(1) 0,410 (H)(1) 0,950 (J)(1) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7226 91 20 Flat-rolled products of tool steel, of a width of 0,073 1,577 (F)(1) < 600 mm, simply hot-rolled 0,752 (G)(1) 0,410 (H)(1) 0,950 (J)(1) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7226 91 91 Flat-rolled products of alloy steel other than stainless 0,073 1,577 (F)(1) steel, simply hot-rolled, of a thickness of ≥ 4,75 mm, 0,752 (G)(1) of a width of < 600 mm (excl. of tool steel, silicon- 0,410 (H)(1) electrical steel or high speed steel) 0,950 (J)(1) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7226 91 99 Flat-rolled products of alloy steel other than stainless 0,073 1,577 (F)(1) steel, simply hot-rolled, of a thickness of < 4,75 mm, 0,752 (G)(1) of a width of < 600 mm (excl. of tool steel, silicon- 0,410 (H)(1) electrical steel or high speed steel) 0,950 (J)(1) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 40/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7226 92 00 Flat-rolled products of alloy steel other than stainless, 0,109 1,673 (F)(1) of a width of < 600 mm, not further worked than 0,815 (G)(1) cold-rolled "cold-reduced" (excl. products of high- 0,460 (H)(1) speed steel or silicon-electrical steel) 1,021 (J)(1) 1,499 (F)(2) 0,801 (G)(2) 0,446 (H)(2) 0,987 (J)(2) 7226 99 10 Flat-rolled products of alloy steel other than stainless, 0,142 1,706 (F)(1) of a width of < 600 mm, hot-rolled or cold-rolled 0,848 (G)(1) "cold-reduced" and electrolytically plated or coated 0,493 (H)(1) with zinc (excl. products of high-speed steel or 1,054 (J)(1) silicon-electrical steel) 1,532 (F)(2) 0,835 (G)(2) 0,480 (H)(2) 1,021 (J)(2) 7226 99 30 Flat-rolled products of alloy steel other than stainless, 0,142 1,706 (F)(1) of a width of < 600 mm, hot-rolled or cold-rolled 0,848 (G)(1) "cold-reduced" and plated or coated with zinc (excl. 0,493 (H)(1) electrolytically plated or coated, and products of high- 1,054 (J)(1) speed steel or silicon-electrical steel) 1,532 (F)(2) 0,835 (G)(2) 0,480 (H)(2) 1,021 (J)(2) 7226 99 70 Flat-rolled products of alloy steel other than stainless, 0,142 1,706 (F)(1) of a width of < 600 mm, hot-rolled or cold-rolled 0,848 (G)(1) "cold-reduced" and further worked (excl. plated or 0,493 (H)(1) coated with zinc, and products of high-speed steel or 1,054 (J)(1) silicon-electrical steel) 1,532 (F)(2) 0,835 (G)(2) 0,480 (H)(2) 1,021 (J)(2) 7227 10 00 Bars and rods of high-speed steel, hot-rolled, in 0,109 1,613 (F)(1) irregularly wound coils 0,788 (G)(1) 0,446 (H)(1) 0,986 (J)(1) 1,446 (F)(2) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7227 20 00 Bars and rods of silico-manganese steel, hot-rolled, in 0,109 1,613 (F)(1) irregularly wound coils 0,788 (G)(1) 0,446 (H)(1) 0,986 (J)(1) 1,446 (F)(2) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7227 90 10 Bars and rods, hot-rolled, of steel containing by 0,109 1,435 (C) weight ≥ 0,0008 % of boron with any other element 0,546 (D) < the minimum content referred to in Note 1 f to this 0,137 (E) chapter, in irregularly wound coils ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 41/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7227 90 50 Bars and rods, hot-rolled, of steel containing by 0,109 1,435 (C) weight 0,9 % to 1,15 % carbon, 0,5 % to 2 % of 0,546 (D) chromium and, if present, ≤ 0,5 of molybdenum, in 0,137 (E) irregularly wound coils 7227 90 95 Bars and rods, hot-rolled, in irregularly wound coils of 0,109 1,613 (F)(1) alloy steel other than stainless (excl. of high-speed 0,788 (G)(1) steel or silico-manganese steel and bars and rods of 0,446 (H)(1) subheadings 7227 90 10 and 7227 90 50) 0,986 (J)(1) 1,446 (F)(2) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7228 10 20 Bars and rods of high-speed steel, not further worked 0,109 1,613 (F)(1) than hot-rolled, hot-drawn or extruded, and hot- 0,788 (G)(1) rolled, hot-drawn or extruded, not further worked 0,446 (H)(1) than clad (excl. semi-finished products, flat-rolled 0,986 (J)(1) products and hot-rolled bars and rods in irregularly 1,446 (F)(2) wound coils) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7228 10 50 Bars and rods of high-speed steel, forged (excl. semi- 0,303 1,807 (F)(1) finished products, flat-rolled products and hot-rolled 0,982 (G)(1) bars and rods in irregularly wound coils) 0,640 (H)(1) 1,180 (J)(1) 1,640 (F)(2) 0,969 (G)(2) 0,628 (H)(2) 1,148 (J)(2) 7228 10 90 Bars and rods of high-speed steel, not further worked 0,109 1,613 (F)(1) than cold-formed or cold-finished, whether or not 0,788 (G)(1) further worked, or hot-formed and further worked 0,446 (H)(1) (excl. forged products, semi-finished products, flat- 0,986 (J)(1) rolled products and hot-rolled bars and rods in 1,446 (F)(2) irregularly wound coils) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7228 20 10 Bars and rods of silico-manganese steel, of rectangular 0,109 1,613 (F)(1) "other than square" cross-section, hot-rolled on four 0,788 (G)(1) faces (excl. semi-finished products, flat-rolled 0,446 (H)(1) products and hot-rolled bars and rods in irregularly 0,986 (J)(1) wound coils) 1,446 (F)(2) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7228 20 91 Bars and rods of silico-manganese steel, of square or 0,109 1,613 (F)(1) other than rectangular cross-section, not further 0,788 (G)(1) worked than hot-rolled, hot-drawn or extruded, and 0,446 (H)(1) hot-rolled, hot-drawn or extruded, not further worked 0,986 (J)(1) than clad (excl. semi-finished products, flat-rolled 1,446 (F)(2) products and hot-rolled bars and rods in irregularly 0,775 (G)(2) wound coils) 0,433 (H)(2) 0,954 (J)(2) 42/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7228 20 99 Bars and rods of silico-manganese stee, of square or 0,109 1,613 (F)(1) other than rectangular cross-section, only cold- 0,788 (G)(1) formed or cold-finished, incl. further worked, or hot- 0,446 (H)(1) rolled and further worked (excl. hot-rolled, hot drawn 0,986 (J)(1) or extruded, not further worked than clad, semi- 1,446 (F)(2) finished products, flat-rolled products and hot-rolled 0,775 (G)(2) bars and rods in irregularly wound coils) 0,433 (H)(2) 0,954 (J)(2) 7228 30 20 Bars and rods of tool steel, only hot-rolled, only hot- 0,109 1,613 (F)(1) drawn or only extruded (excl. semi-finished products, 0,788 (G)(1) flat-rolled products and hot-rolled bars and rods in 0,446 (H)(1) irregularly wound coils) 0,986 (J)(1) 1,446 (F)(2) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7228 30 41 Bars and rods of steel containing by weight 0,9 to 0,109 1,435 (C) 1,15 % of carbon and 0,5 to 2 % of chromium, and, if 0,546 (D) present, ≤ 0,5 % of molybdenum, only hot-rolled, 0,137 (E) hot-drawn or hot-extruded, of a circular cross-section of a diameter of ≥ 80 mm (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 7228 30 49 Bars and rods of steel containing by weight 0,9 to 0,109 1,435 (C) 1,15 % of carbon and 0,5 to 2 % of chromium, and, if 0,546 (D) present, ≤ 0,5 % of molybdenum, only hot-rolled, 0,137 (E) only hot-drawn or hot-extruded (other than of circular cross-section, of a diameter of ≥ 80 mm and excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 7228 30 61 Bars and rods of alloy steel other than stainless steel, 0,109 1,613 (F)(1) only hot-rolled, hot-drawn or hot-extruded, of 0,788 (G)(1) circular cross-section, of a diameter of ≥ 80 mm 0,446 (H)(1) (other than of high-speed steel, silico-manganese steel, 0,986 (J)(1) tool steel, articles of subheading 7228 30 41 and excl. 1,446 (F)(2) semi-finished products, flat-rolled products and hot- 0,775 (G)(2) rolled bars and rods in irregularly wound coils) 0,433 (H)(2) 0,954 (J)(2) 7228 30 69 Bars and rods or alloy steel other than stainless steel, 0,109 1,613 (F)(1) only hot-rolled, hot-drawn or hot-extruded, of 0,788 (G)(1) circular cross-section, of a diameter of < 80 mm 0,446 (H)(1) (other than of high-speed steel, silico-manganese steel, 0,986 (J)(1) tool steel and articles of subheading 7228 30 49 and 1,446 (F)(2) excl. semi-finished products, flat-rolled products and 0,775 (G)(2) hot-rolled bars and rods in irregularly wound coils) 0,433 (H)(2) 0,954 (J)(2) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 43/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7228 30 70 Bars and rods of alloy steel other than stainless steel, 0,109 1,613 (F)(1) of rectangular "other than square" cross-section, hot- 0,788 (G)(1) rolled on four faces (other than of high-speed steel, 0,446 (H)(1) silico-manganese steel, tool steel, articles of 0,986 (J)(1) subheading 7228 30 41 and 7228 30 49 and excl. 1,446 (F)(2) semi-finished products, flat-rolled products and hot- 0,775 (G)(2) rolled bars and rods in irregularly wound coils) 0,433 (H)(2) 0,954 (J)(2) 7228 30 89 Bars and rods of alloy steel other than stainless steel, 0,109 1,613 (F)(1) only hot-rolled, hot-drawn or hot-extruded, of other 0,788 (G)(1) than rectangular [other than square] cross-section, 0,446 (H)(1) rolled on four faces, or of circular cross-section (other 0,986 (J)(1) than of high-speed steel, silico-manganese steel, tool 1,446 (F)(2) steel, articles of subheading 7228 30 49 and excl. 0,775 (G)(2) semi-finished products, flat-rolled products and hot- 0,433 (H)(2) rolled bars and rods in irregularly wound coils) 0,954 (J)(2) 7228 40 10 Bars and rods of tool steel, only forged (excl. semi- 0,303 1,807 (F)(1) finished products, flat-rolled products and hot-rolled 0,982 (G)(1) bars and rods in irregularly wound coils) 0,640 (H)(1) 1,180 (J)(1) 1,640 (F)(2) 0,969 (G)(2) 0,628 (H)(2) 1,148 (J)(2) 7228 40 90 Bars and rods of alloy steel, other than stainless steel, 0,303 1,807 (F)(1) only forged (excl. of high-speed steel, silico- 0,982 (G)(1) manganese steel, tool steel, semi-finished products, 0,640 (H)(1) flat-rolled products and hot-rolled bars and rods in 1,180 (J)(1) irregularly wound coils) 1,640 (F)(2) 0,969 (G)(2) 0,628 (H)(2) 1,148 (J)(2) 7228 50 20 Bars and rods of tool steel, only cold-formed or cold- 0,109 1,613 (F)(1) finished (excl. semi-finished products, flat-rolled 0,788 (G)(1) products and hot-rolled bars and rods in irregularly 0,446 (H)(1) wound coils) 0,986 (J)(1) 1,446 (F)(2) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7228 50 40 Bars and rods of steel containing 0,9 % to 1,15 % of 0,109 1,435 (C) carbon, 0,5 % to 2 % of chromium and, if present 0,546 (D) ≤ 0,5 % of molybdenum, only cold-formed or cold- 0,137 (E) finished (excl. semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils) 7228 50 61 Bars and rods of alloy steel, other than stainless steel, 0,109 1,613 (F)(1) not further worked than cold-formed or cold-finished, 0,788 (G)(1) of circular cross-section, of a diameter of ≥ 80 mm 0,446 (H)(1) (excl. of high-speed steel, silico-manganese steel, tool 0,986 (J)(1) steel, articles of subheading 7228 50 40, semi- 1,446 (F)(2) finished products, flat-rolled products and hot-rolled 0,775 (G)(2) bars and rods in irregularly wound coils) 0,433 (H)(2) 0,954 (J)(2) 44/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7228 50 69 Bars and rods of alloy steel, other than stainless steel, 0,109 1,613 (F)(1) not further worked than cold-formed or cold-finished, 0,788 (G)(1) of circular cross-section, of a diameter of < 80 mm 0,446 (H)(1) (excl. of high-speed steel, silico-manganese steel, tool 0,986 (J)(1) steel, articles of subheading 7228 50 40, semi- 1,446 (F)(2) finished products, flat-rolled products and hot-rolled 0,775 (G)(2) bars and rods in irregularly wound coils) 0,433 (H)(2) 0,954 (J)(2) 7228 50 80 Bars and rods of alloy steel, other than stainless steel, 0,109 1,613 (F)(1) not further worked than cold-formed or cold-finished 0,788 (G)(1) (excl. of circular cross-section and products of high- 0,446 (H)(1) speed steel, silico-manganese steel, tool steel, articles 0,986 (J)(1) of subheading 7228 50 40, semi-finished products, 1,446 (F)(2) flat-rolled products and hot-rolled bars and rods in 0,775 (G)(2) irregularly wound coils) 0,433 (H)(2) 0,954 (J)(2) 7228 60 20 Bars and rods of tool steel, cold-formed or cold- 0,109 1,613 (F)(1) finished and further worked or hot-formed and 0,788 (G)(1) further worked (excl. semi-finished products, flat- 0,446 (H)(1) rolled products and hot-rolled bars and rods in 0,986 (J)(1) irregularly wound coils) 1,446 (F)(2) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7228 60 80 Bars and rods of alloy steel, other than stainless steel, 0,109 1,613 (F)(1) cold-formed or cold-finished and further worked or 0,788 (G)(1) hot-formed and further worked (excl. bars and rods of 0,446 (H)(1) high-speed steel, silico-manganese steel or tool steel, 0,986 (J)(1) semi-finished products, flat-rolled products and hot- 1,446 (F)(2) rolled bars and rods in irregularly wound coils) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7228 70 10 Angles, shapes and sections of alloy steel other than 0,109 1,613 (F)(1) stainless, not further worked than hot-rolled, hot- 0,788 (G)(1) drawn or extruded 0,446 (H)(1) 0,986 (J)(1) 1,446 (F)(2) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7228 70 90 Angles, shapes and sections of alloy steel other than 0,109 1,613 (F)(1) stainless, n.e.s. (excl. products not further worked 0,788 (G)(1) than hot-rolled, hot-drawn or extruded) 0,446 (H)(1) 0,986 (J)(1) 1,446 (F)(2) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7228 80 00 Hollow drill bars and rods, of alloy or non-alloy steel 0,109 1,613 (F)(1) 0,788 (G)(1) 0,446 (H)(1) 0,986 (J)(1) 1,446 (F)(2) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 45/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7229 20 00 Wire of silico-manganese steel, in coils (excl. bars and 0,109 1,613 (F)(1) rods) 0,788 (G)(1) 0,446 (H)(1) 0,986 (J)(1) 1,446 (F)(2) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7229 90 20 Wire of high-speed steel, in coils (excl. bars and rods) 0,109 1,613 (F)(1) 0,788 (G)(1) 0,446 (H)(1) 0,986 (J)(1) 1,446 (F)(2) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7229 90 50 Wire of steel containing by weight 0,9 % to 1,1 % of 0,109 1,435 (C) carbon, 0,5 % to 2 % of chromium and, if present, 0,546 (D) ≤ 0,5 % of molybdenum, in coils (excl. rolled bars and 0,137 (E) rods) 7229 90 90 Wire of alloy steel other than stainless, in coils (excl. 0,109 1,613 (F)(1) rolled bars and rods, wire of high-speed steel or silico- 0,788 (G)(1) manganese steel and articles of subheading 0,446 (H)(1) 7229 90 50) 0,986 (J)(1) 1,446 (F)(2) 0,775 (G)(2) 0,433 (H)(2) 0,954 (J)(2) 7301 10 00 Sheet piling of iron or steel, whether or not drilled, 0,079 1,458 (C) punched or made from assembled elements 0,533 (D) 0,108 (E) 7301 20 00 Angles, shapes and sections, of iron or steel, welded 0,079 1,458 (C) 0,533 (D) 0,108 (E) 7302 10 10 Current-conducting rails of iron or steel, with parts of 0,057 1,383 (C) non-ferrous metal, for railway or tramway track (excl. 0,494 (D) check-rails) 0,085 (E) 7302 10 22 Vignole rails of iron or steel, for railway or tramway 0,057 1,383 (C) track, new, of a weight of ≥ 36 kg/m 0,494 (D) 0,085 (E) 7302 10 28 Vignole rails of iron or steel, for railway or tramway 0,057 1,383 (C) track, new, of a weight of < 36 kg/m 0,494 (D) 0,085 (E) 7302 10 40 Grooved rails of iron or steel, for railway or tramway 0,057 1,383 (C) track, new 0,494 (D) 0,085 (E) 7302 10 50 Rails of iron or steel, for railway or tramway track, 0,057 1,383 (C) new (excl. vignole rails, grooved rails, and current- 0,494 (D) conducting rails with parts of non-ferrous metal) 0,085 (E) 7302 10 90 Rails of iron or steel, for railway or tramway track, 0,057 1,383 (C) used (excl. current-conducting rails with parts of non- 0,494 (D) ferrous metal) 0,085 (E) 46/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7302 30 00 Switch blades, crossing frogs, point rods and other 0,057 1,383 (C) crossing pieces, for railway or tramway track, of iron 0,494 (D) or steel 0,085 (E) 7302 40 00 Fish-plates and sole plates of iron or steel, for railways 0,057 1,383 (C) or tramways 0,494 (D) 0,085 (E) 7302 90 00 Sleepers "cross-ties", check-rails, rack rails, chairs, 0,057 1,383 (C) chair wedges, rail clips, bedplates and ties and other 0,494 (D) specialised material for the jointing or fixing of 0,085 (E) railway or tramway track, of iron or steel (excl. rails, switch blades, crossing frogs, point rods and other crossing pieces, and fish-plates and sole plates) 7303 00 10 Tubes and pipes of a kind used in pressure systems, of 0,163 1,484 cast iron 7303 00 90 Tubes, pipes and hollow profiles, of cast iron (excl. 0,163 1,484 products of a kind used in pressure systems) 7304 11 00 Line pipe of a kind used for oil or gas pipelines, 0,057 1,173 (1) seamless, of stainless steel 1,135 (2) 7304 19 10 Line pipe of a kind used for oil or gas pipelines, 0,057 1,383 (C) seamless, of iron or steel, of an external diameter of 0,494 (D) ≤ 168,3 mm (excl. products of stainless steel or of 0,085 (E) cast iron) 7304 19 30 Line pipe of a kind used for oil or gas pipelines, 0,057 1,383 (C) seamless, of iron or steel, of an external diameter of 0,494 (D) > 168,3 mm but ≤ 406,4 mm (excl. products of 0,085 (E) stainless steel or of cast iron) 7304 19 90 Line pipe of a kind used for oil or gas pipelines, 0,057 1,383 (C) seamless, of iron or steel, of an external diameter of 0,494 (D) > 406,4 mm (excl. products of stainless steel or of 0,085 (E) cast iron) 7304 22 00 Drill pipe, seamless, of stainless steel, of a kind used in 0,057 1,173 (1) drilling for oil or gas 1,135 (2) 7304 23 00 Drill pipe, seamless, of a kind used in drilling for oil 0,057 1,383 (C) or gas, of iron or steel (excl. products of stainless steel 0,494 (D) or of cast iron) 0,085 (E) 7304 24 00 Casing and tubing, seamless, of a kind used for 0,057 1,173 (1) drilling for oil or gas, of stainless steel 1,135 (2) 7304 29 10 Casing and tubing of a kind used for drilling for oil or 0,057 1,383 (C) gas, seamless, of iron or steel, of an external diameter 0,494 (D) ≤ 168,3 mm (excl. products of cast iron) 0,085 (E) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 47/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7304 29 30 Casing and tubing of a kind used for drilling for oil or 0,057 1,383 (C) gas, seamless, of iron or steel, of an external diameter 0,494 (D) > 168,3 mm, but ≤ 406,4 mm (excl. products of cast 0,085 (E) iron) 7304 29 90 Casing and tubing of a kind used for drilling for oil or 0,057 1,383 (C) gas, seamless, of iron or steel, of an external diameter 0,494 (D) > 406,4 mm (excl. products of cast iron) 0,085 (E) 7304 31 20 Precision tubes, seamless, of circular cross-section, of 0,057 1,383 (C) iron or non-alloy steel, cold-drawn or cold-rolled 0,494 (D) "cold-reduced" (excl. line pipe of a kind used for oil or 0,085 (E) gas pipelines or casing and tubing of a kind used for drilling for oil or gas) 7304 31 80 Tubes, pipes and hollow profiles, seamless, of circular 0,057 1,383 (C) cross-section, of iron or non-alloy steel, cold-drawn 0,494 (D) or cold-rolled "cold-reduced" (excl. cast iron products, 0,085 (E) line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas and precision tubes) 7304 39 50 Threaded or threadable tubes "gas pipe", seamless, of 0,057 1,383 (C) iron or non-alloy steel (excl. of cast iron) 0,494 (D) 0,085 (E) 7304 39 82 Tubes, pipes and hollow profiles, seamless, of circular 0,057 1,383 (C) cross-section, of iron or non-alloy steel, of an external 0,494 (D) diameter of ≤ 168,3 mm (excl. cold-drawn or cold- 0,085 (E) rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50) 7304 39 83 Tubes, pipes and hollow profiles, seamless, of circular 0,057 1,383 (C) cross-section, of iron or non-alloy steel, of an external 0,494 (D) diameter of > 168,3 mm but ≤ 406,4 mm (excl. cold- 0,085 (E) drawn or cold-rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50) 7304 39 88 Tubes, pipes and hollow profiles, seamless, of circular 0,057 1,383 (C) cross-section, of iron or non-alloy steel, of an external 0,494 (D) diameter of > 406,4 mm (excl. cold-drawn or cold- 0,085 (E) rolled, of cast iron, line pipe of a kind used for oil or gas pipelines, casing, tubing and drill pipe of a kind used in drilling for oil or gas and tubes, and gas pipes of subheading 7304 39 50) 48/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7304 41 00 Tubes, pipes and hollow profiles, seamless, of circular 0,057 1,173 (1) cross-section, of stainless steel, cold-drawn or cold- 1,135 (2) rolled "cold-reduced" (excl. line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used for drilling for oil or gas) 7304 49 83 Tubes, pipes and hollow profiles, seamless, of circular 0,057 1,173 (1) cross-section, of stainless steel, of an external 1,135 (2) diameter of ≤ 168,3 mm (excl. cold-drawn or cold- rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) 7304 49 85 Tubes, pipes and hollow profiles, seamless, of circular 0,057 1,173 (1) cross-section, of stainless steel, of an external 1,135 (2) diameter of > 168,3 mm but ≤ 406,4 mm (excl. cold- drawn or cold-rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) 7304 49 89 Tubes, pipes and hollow profiles, seamless, of circular 0,057 1,173 (1) cross-section, of stainless steel, of an external 1,135 (2) diameter of > 406,4 mm (excl. cold-drawn or cold- rolled, line pipe of a kind used for oil or gas pipelines, and casing and tubing of a kind used for drilling for oil or gas and tubes) 7304 51 10 Tubes, pipes and hollow profiles, seamless, of circular 0,057 1,561 (F)(1) cross-section, of alloy steel other than stainless, cold- 0,736 (G)(1) drawn or cold-rolled "cold-reduced", straight and of 0,394 (H)(1) uniform wall-thickness, containing by weight ≥ 0,9 % 0,934 (J)(1) but ≤ 1,15 % carbon and ≥ 0,5 % but ≤ 2 % 1,394 (F)(2) chromium, whether or not containing by weight 0,723 (G)(2) ≤ 0,5 % molybdenum (excl. tubes, pipes and hollow 0,381 (H)(2) profiles of subheadings 7304 19 to 7304 29) 0,902 (J)(2) 7304 51 81 Precision tubes, seamless, of circular cross-section, of 0,057 1,561 (F)(1) alloy steel other than stainless, cold-drawn or cold- 0,736 (G)(1) rolled "cold-reduced" (excl. line pipe of a kind used 0,394 (H)(1) for oil or gas pipelines, casing and tubing of a kind 0,934 (J)(1) used for drilling for oil and tubes, and pipes and 1,394 (F)(2) hollow profiles, straight and of uniform wall- 0,723 (G)(2) thickness, containing by weight ≥ 0,9 % but ≤ 1,15 % 0,381 (H)(2) carbon and ≥ 0,5 % but ≤ 2 % chrome, whether or 0,902 (J)(2) not containing by weight ≤ 0,5 % molybdenum) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 49/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7304 51 89 Tubes, pipes and hollow profiles, seamless, of circular 0,057 1,561 (F)(1) cross-section, of alloy steel other than stainless, not 0,736 (G)(1) cold-drawn or cold-rolled "cold-reduced" (excl. line 0,394 (H)(1) pipe of a kind used for oil or gas pipelines, casing and 0,934 (J)(1) tubing of a kind used for drilling for oil, precision 1,394 (F)(2) tubes, and , pipes and hollow profiles, straight and of 0,723 (G)(2) uniform wall-thickness, containing by weight ≥ 0,9 % 0,381 (H)(2) but ≤ 1,15 % carbon and ≥ 0,5 % but ≤ 2 % chrome, 0,902 (J)(2) whether or not containing by weight ≤ 0,5 % molybdenum) 7304 59 30 Tubes, pipes and hollow profiles of alloy steel (excl. 0,057 1,383 (C) stainless), seamless, of circular cross-section (not cold- 0,494 (D) drawn or cold-rolled), straight and of uniform wall- 0,085 (E) thickness, containing by weight ≥ 0,9 % but ≤ 1,15 % carbon and ≥ 0,5 % but ≤ 2 % chromium, whether or not containing by weight ≤ 0,5 % molybdenum (excl. tubes, pipes and hollow profiles of subheadings 7304 19 to 7304 29) 7304 59 82 Tubes, pipes and hollow profiles, seamless, of circular 0,057 1,561 (F)(1) cross-section, of alloy steel other than stainless, of an 0,736 (G)(1) external diameter of ≤ 168,3 mm (excl. cold-drawn or 0,394 (H)(1) cold-rolled, line pipe of a kind used for oil or gas 0,934 (J)(1) pipelines, casing and tubing of a kind used for drilling 1,394 (F)(2) for oil or gas, and products of subheading 0,723 (G)(2) 7304 59 30) 0,381 (H)(2) 0,902 (J)(2) 7304 59 83 Tubes, pipes and hollow profiles, seamless, of circular 0,057 1,561 (F)(1) cross-section, of alloy steel other than stainless, of an 0,736 (G)(1) external diameter of > 168,3 mm but ≤ 406,4 mm 0,394 (H)(1) (excl. cold-drawn or cold-rolled, line pipe of a kind 0,934 (J)(1) used for oil or gas pipelines, casing and tubing of a 1,394 (F)(2) kind used for drilling for oil or gas, and products of 0,723 (G)(2) subheading 7304 59 30) 0,381 (H)(2) 0,902 (J)(2) 7304 59 89 Tubes, pipes and hollow profiles, seamless, of circular 0,057 1,561 (F)(1) cross-section, of alloy steel other than stainless, of an 0,736 (G)(1) external diameter of > 406,4 mm (excl. cold-drawn or 0,394 (H)(1) cold-rolled, line pipe of a kind used for oil or gas 0,934 (J)(1) pipelines, casing and tubing of a kind used for drilling 1,394 (F)(2) for oil or gas, and products of subheading 0,723 (G)(2) 7304 59 30) 0,381 (H)(2) 0,902 (J)(2) 7304 90 00 Tubes, pipes and hollow profiles, seamless, of non- 0,057 1,383 (C) circular cross-section, of iron or steel (excl. products 0,494 (D) of cast iron) 0,085 (E) 7305 11 00 Line pipe of a kind used for oil or gas pipelines, 0,079 1,458 (C) having circular cross-sections and an external 0,533 (D) diameter of > 406,4 mm, of iron or steel, 0,108 (E) longitudinally submerged arc welded 50/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7305 12 00 Line pipe of a kind used for oil or gas pipelines, 0,079 1,458 (C) having circular cross-sections and an external 0,533 (D) diameter of > 406,4 mm, of iron or steel, 0,108 (E) longitudinally arc welded (excl. products longitudinally submerged arc welded) 7305 19 00 Line pipe of a kind used for oil or gas pipelines, 0,079 1,458 (C) having circular cross-sections and an external 0,533 (D) diameter of > 406,4 mm, of flat-rolled products of 0,108 (E) iron or steel (excl. products longitudinally arc welded) 7305 20 00 Casing of a kind used in drilling for oil or gas, having 0,079 1,458 (C) circular cross-sections and an external diameter of 0,533 (D) > 406,4 mm, of flat-rolled products of iron or steel 0,108 (E) 7305 31 00 Tubes and pipes having circular cross-sections and an 0,079 1,458 (C) external diameter of > 406,4 mm, of iron or steel, 0,533 (D) longitudinally welded (excl. products of a kind used 0,108 (E) for oil or gas pipelines or of a kind used in drilling for oil or gas) 7305 39 00 Tubes and pipes having circular cross-sections and an 0,079 1,458 (C) external diameter of > 406,4 mm, of iron or steel, 0,533 (D) welded (excl. products longitudinally welded or of a 0,108 (E) kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) 7305 90 00 Tubes and pipes having circular cross-sections and an 0,079 1,458 (C) external diameter of > 406,4 mm, of flat-rolled 0,533 (D) products of iron or steel, welded (excl. welded 0,108 (E) products or products of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas) 7306 11 00 Line pipe of a kind used for oil or gas pipelines, 0,109 1,270 (1) welded, of flat-rolled products of stainless steel, of an 1,230 (2) external diameter of ≤ 406,4 mm 7306 19 00 Line pipe of a kind used for oil or gas pipelines, 0,079 1,458 (C) welded, of flat-rolled products of iron or steel, of an 0,533 (D) external diameter of ≤ 406,4 mm (excl. products of 0,108 (E) stainless steel or of cast iron) 7306 21 00 Casing and tubing of a kind used in drilling for oil or 0,109 1,270 (1) gas, welded, of flat-rolled products of stainless steel, 1,230 (2) of an external diameter of ≤ 406,4 mm 7306 29 00 Casing and tubing of a kind used in drilling for oil or 0,079 1,458 (C) gas, welded, of flat-rolled products of iron or steel, of 0,533 (D) an external diameter of ≤ 406,4 mm (excl. products 0,108 (E) of stainless steel or of cast iron) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 51/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7306 30 12 Precision tubes, welded, of circular cross-section, of 0,079 1,458 (C) iron or non-alloy steel, cold-drawn or cold-rolled 0,533 (D) "cold-reduced" 0,108 (E) 7306 30 18 Precision tubes, welded, of circular cross-section, of 0,044 1,370 (C) iron or non-alloy steel (excl. cold-drawn or cold- 0,481 (D) rolled) 0,072 (E) 7306 30 41 Threaded or threadable tubes "gas pipe", welded, of 0,112 1,491 (C) circular cross-section, of iron or non-alloy steel, 0,567 (D) plated or coated with zinc 0,141 (E) 7306 30 49 Threaded or threadable tubes "gas pipe", welded, of 0,112 1,491 (C) circular cross-section, of iron or non-alloy steel (excl. 0,567 (D) products plated or coated with zinc) 0,141 (E) 7306 30 72 Other tubes, pipes and hollow profiles, welded, of 0,112 1,491 (C) circular cross-section, of iron or non-alloy steel, of an 0,567 (D) external diameter of ≤ 168,3 mm, plated or coated 0,141 (E) with zinc (excl. line pipe of a kind used for oil or gas pipelines or casing and tubingof a kind used in drilling for oil or gas) 7306 30 77 Other tubes, pipes and hollow profiles, welded, of 0,112 1,491 (C) circular cross-section, of iron or non-alloy steel of an 0,567 (D) external diameter of ≤ 168,3 mm (excl. plated or 0,141 (E) coated with zinc and line pipe of a kind used for oil or gas pipelines, casing and tubing of a kind used in drilling for oil or gas, precision tubes and threaded or threadable tubes "gas pipe") 7306 30 80 Tubes, pipes and hollow profiles, welded, having a 0,112 1,491 (C) circular cross-section, of iron or steel, of an external 0,567 (D) diameter of > 168,3 mm but ≤ 406,4 mm (excl. line 0,141 (E) pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, or precision steel tubes, electrical conduit tubes or threaded or threadable tubes "gas pipe") 7306 40 20 Tubes, pipes and hollow profiles, welded, of circular 0,109 1,270 (1) cross-section, of stainless steel, cold-drawn or cold- 1,230 (2) rolled "cold-reduced" (excl. products having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 7306 40 80 Tubes, pipes and hollow profiles, welded, of circular 0,073 1,189 (1) cross-section, of stainless steel (excl. products cold- 1,151 (2) drawn or cold-rolled "cold-reduced", tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas) 52/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7306 50 21 Precision steel tubes, welded, of circular cross-section, 0,109 1,673 (F)(1) of alloy steel other than stainless, cold-drawn or cold- 0,815 (G)(1) rolled "cold-reduced" 0,460 (H)(1) 1,021 (J)(1) 1,499 (F)(2) 0,801 (G)(2) 0,446 (H)(2) 0,987 (J)(2) 7306 50 29 Precision steel tubes, welded, of circular cross-section, 0,073 1,577 (F)(1) of alloy steel other than stainless (excl. cold-drawn or 0,752 (G)(1) cold-rolled) 0,410 (H)(1) 0,950 (J)(1) 1,409 (F)(2) 0,739 (G)(2) 0,397 (H)(2) 0,918 (J)(2) 7306 50 80 Tubes, pipes and hollow profiles, welded, of circular 0,109 1,673 (F)(1) cross-section, of alloy steel other than stainless (excl. 0,815 (G)(1) tubes and pipes having internal and external circular 0,460 (H)(1) cross-sections and an external diameter of 1,021 (J)(1) > 406,4 mm, and line pipe of a kind used for oil or 1,499 (F)(2) gas pipelines or casing and tubing of a kind used in 0,801 (G)(2) drilling for oil or gas, and precision steel tubes) 0,446 (H)(2) 0,987 (J)(2) 7306 61 10 Tubes and pipes and hollow profiles, welded, of 0,109 1,270 (1) square or rectangular cross-section, of stainless steel 1,230 (2) 7306 61 92 Tubes and pipes and hollow profiles, welded, of 0,112 1,491 (C) square or rectangular cross-section, of iron or steel 0,567 (D) other than stainless steel, with a wall thickness of 0,141 (E) ≤ 2 mm 7306 61 99 Tubes and pipes and hollow profiles, welded, of 0,112 1,491 (C) square or rectangular cross-section, of iron or steel 0,567 (D) other than stainless steel, with a wall thickness of 0,141 (E) > 2 mm 7306 69 10 Tubes, pipes and hollow profiles, welded, of non- 0,109 1,270 (1) circular cross-section, of stainless steel (excl. tubes and 1,230 (2) pipes having internal and external circular cross- sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) 7306 69 90 Tubes, pipes and hollow profiles, welded, of non- 0,112 1,491 (C) circular cross-section, of iron or steel other than 0,567 (D) stainless steel (excl. tubes and pipes having internal 0,141 (E) and external circular cross-sections and an external diameter of > 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 53/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7306 90 00 Tubes, pipes and hollow profiles "e.g., open seam, 0,112 1,491 (C) riveted or similarly closed", of iron or steel (excl. of 0,567 (D) cast iron, seamless or welded tubes and pipes and 0,141 (E) tubes and pipes having internal and external circular cross-sections and an external diameter of > 406,4 mm) 7307 11 10 Tube or pipe fittings of non-malleable cast iron, of a 0,163 1,409 kind used in pressure systems 7307 11 90 Tube or pipe fittings of non-malleable cast iron (excl. 0,163 1,409 products of a kind used in pressure systems) 7307 19 10 Tube or pipe fittings of cast iron (excl. of non- 0,163 1,409 malleable) 7307 19 90 Cast tube or pipe fittings of steel 0,303 1,629 (C) 0,740 (D) 0,331 (E) 7307 21 00 Flanges of stainless steel (excl. cast products) 0,057 1,173 (1) 1,135 (2) 7307 22 10 Sleeves, of stainless steel, threaded (excl. cast 0,057 1,173 (1) products) 1,135 (2) 7307 22 90 Elbows and bends, of stainless steel, threaded (excl. 0,057 1,173 (1) cast products) 1,135 (2) 7307 23 10 Butt welding elbows and bends of stainless steel (excl. 0,057 1,173 (1) cast products) 1,135 (2) 7307 23 90 Butt welding tube or pipe fittings of stainless steel 0,057 1,173 (1) (excl. cast products and elbows and bends) 1,135 (2) 7307 29 10 Threaded tube or pipe fittings of stainless steel (excl. 0,057 1,173 (1) cast products, flanges, elbows, bends and sleeves) 1,135 (2) 7307 29 80 Tube or pipe fittings of stainless steel (excl. cast, 0,057 1,173 (1) threaded, butt welding fittings and flanges) 1,135 (2) 7307 91 00 Flanges of iron or steel (excl. cast or stainless 0,057 1,383 (C) products) 0,494 (D) 0,085 (E) 7307 92 10 Sleeves of iron or steel, threaded (excl. cast or of 0,057 1,383 (C) stainless steel) 0,494 (D) 0,085 (E) 7307 92 90 Elbows and bends, of iron or steel, threaded (excl. cast 0,057 1,383 (C) or of stainless steel) 0,494 (D) 0,085 (E) 7307 93 11 Butt welding elbows and bends, of iron or steel, with 0,057 1,383 (C) greatest external diameter ≤ 609,6 mm (excl. cast iron 0,494 (D) or stainless steel products) 0,085 (E) 54/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7307 93 19 Butt welding fittings of iron or steel, with greatest 0,057 1,383 (C) external diameter ≤ 609,6 mm (excl. cast iron or 0,494 (D) stainless steel products, elbows, bends and flanges) 0,085 (E) 7307 93 91 Butt welding elbows and bends, of iron or steel, with 0,057 1,383 (C) greatest external diameter > 609,6 mm (excl. cast iron 0,494 (D) or stainless steel products) 0,085 (E) 7307 93 99 Butt welding fittings of iron or steel, with greatest 0,057 1,383 (C) external diameter > 609,6 mm (excl. cast iron or 0,494 (D) stainless steel products, elbows, bends and flanges) 0,085 (E) 7307 99 10 Threaded tube or pipe fittings, of iron or steel (excl. 0,057 1,383 (C) cast iron or stainless steel products, flanges, elbows, 0,494 (D) bends and sleeves) 0,085 (E) 7307 99 80 Tube or pipe fittings, of iron or steel (excl. of cast iron 0,057 1,383 (C) or stainless steel, threaded, butt welding fittings, and 0,494 (D) flanges) 0,085 (E) 7308 10 00 Bridges and bridge-sections, of iron or steel 0,112 1,491 (C) 0,567 (D) 0,141 (E) 7308 20 00 Towers and lattice masts, of iron or steel 0,112 1,491 (C) 0,567 (D) 0,141 (E) 7308 30 00 Doors, windows and their frames and thresholds for 0,112 1,491 (C) doors, of iron or steel 0,567 (D) 0,141 (E) 7308 40 00 Equipment for scaffolding, shuttering, propping or 0,112 1,491 (C) pit-propping (excl. composite sheetpiling products 0,567 (D) and formwork panels for poured-in-place concrete, 0,141 (E) which have the characteristics of moulds) 7308 90 51 Panels comprising two walls of profiled "ribbed" 0,112 1,491 (C) sheet, of iron or steel, with an insulating core 0,567 (D) 0,141 (E) 7308 90 59 Structures and parts of structures, of iron or steel, 0,112 1,491 (C) solely or principally of sheet, n.e.s. (excl. doors and 0,567 (D) windows and their frames, and panels comprising two 0,141 (E) walls of profiled "ribbed" sheet, of iron or steel, with an insulating core) 7308 90 98 Structures and parts of structures of iron or steel, 0,112 1,491 (C) n.e.s. (excl. bridges and bridge-sections; towers; lattice 0,567 (D) masts; doors, windows and their frames and 0,141 (E) thresholds; equipment for scaffolding, shuttering, propping or pit-propping, and products made principally of sheet) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 55/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7309 00 10 Reservoirs, tanks, vats and similar containers, of iron 0,112 1,491 (C) or steel, for gases other than compressed or liquefied 0,567 (D) gas, of a capacity of > 300 l (excl. containers fitted 0,141 (E) with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) 7309 00 30 Reservoirs, tanks, vats and similar containers, of iron 0,112 1,491 (C) or steel, for liquids, lined or heat-insulated and of a 0,567 (D) capacity of > 300 l (excl. containers fitted with 0,141 (E) mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) 7309 00 51 Reservoirs, tanks, vats and similar containers, of iron 0,112 1,491 (C) or steel, for liquids, of a capacity of > 100.000 l (excl. 0,567 (D) containers lined or heat-insulated or fitted with 0,141 (E) mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) 7309 00 59 Reservoirs, tanks, vats and similar containers, of iron 0,112 1,491 (C) or steel, for liquids, of a capacity of ≤ 100.000 l but 0,567 (D) > 300 l (excl. containers lined or heat-insulated or 0,141 (E) fitted with mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) 7309 00 90 Reservoirs, tanks, vats and similar containers, of iron 0,112 1,491 (C) or steel, for solids, of a capacity of > 300 l (excl. 0,567 (D) containers lined or heat-insulated or fitted with 0,141 (E) mechanical or thermal equipment and containers specifically constructed or equipped for one or more types of transport) 7310 10 00 Tanks, casks, drums, cans, boxes and similar 0,112 1,491 (C) containers, of iron or steel, for any material, of a 0,567 (D) capacity of ≥ 50 l but ≤ 300 l, n.e.s. (excl. containers 0,141 (E) for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment) 7310 21 11 Cans of iron or steel, of a capacity of < 50 l, which are 0,112 1,491 (C) to be closed by soldering or crimping, of a kind used 0,567 (D) for preserving food 0,141 (E) 7310 21 19 Cans of iron or steel, of a capacity of < 50 l, which are 0,112 1,491 (C) to be closed by soldering or crimping, of a kind used 0,567 (D) for preserving drink 0,141 (E) 56/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7310 21 91 Cans of iron or steel, of a capacity of < 50 l, which are 0,112 1,491 (C) to be closed by soldering or crimping, of a wall 0,567 (D) thickness of < 0,5 mm (excl. cans for compressed or 0,141 (E) liquefied gas, and cans of a kind used for preserving food and drink) 7310 21 99 Cans of iron or steel, of a capacity of < 50 l, which are 0,112 1,491 (C) to be closed by soldering or crimping, of a wall 0,567 (D) thickness of ≥ 0,5 mm (excl. cans for compressed or 0,141 (E) liquefied gas, and cans of a kind used for preserving food and drink) 7310 29 10 Tanks, casks, drums, cans, boxes and similar 0,112 1,491 (C) containers, of iron or steel, for any material, of a 0,567 (D) capacity of < 50 l and of a wall thickness of 0,141 (E) < 0,5 mm, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping) 7310 29 90 Tanks, casks, drums, cans, boxes and similar 0,112 1,491 (C) containers, of iron or steel, for any material, of a 0,567 (D) capacity of < 50 l and of a wall thickness of 0,141 (E) ≥ 0,5 mm, n.e.s. (excl. containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping) 7311 00 11 Containers of iron or steel, seamless, for compressed 0,038 1,364 (C) or liquefied gas, for a pressure ≥ 165 bar, of a capacity 0,475 (D) < 20 l (excl. containers specifically constructed or 0,066 (E) equipped for one or more types of transport) 7311 00 13 Containers of iron or steel, seamless, for compressed 0,038 1,364 (C) or liquefied gas, for a pressure ≥ 165 bar, of a capacity 0,475 (D) ≥ 20 l to ≤ 50 l (excl. containers specifically 0,066 (E) constructed or equipped for one or more types of transport) 7311 00 19 Containers of iron or steel, seamless, for compressed 0,038 1,364 (C) or liquefied gas, for a pressure ≥ 165 bar, of a capacity 0,475 (D) > 50 l (excl. containers specifically constructed or 0,066 (E) equipped for one or more types of transport) 7311 00 30 Containers of iron or steel, seamless, for compressed 0,038 1,364 (C) or liquefied gas, for a pressure < 165 bar (excl. 0,475 (D) containers specifically constructed or equipped for 0,066 (E) one or more types of transport) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 57/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7311 00 91 Containers of iron or steel, seamless, for compressed 0,038 1,364 (C) or liquefied gas, of a capacity of < 1.000 l (excl. 0,475 (D) seamless containers and containers specifically 0,066 (E) constructed or equipped for one or more types of transport) 7311 00 99 Containers of iron or steel, seamless, for compressed 0,038 1,364 (C) or liquefied gas, of a capacity of ≥ 1.000 l (excl. 0,475 (D) seamless containers and containers specifically 0,066 (E) constructed or equipped for one or more types of transport) 7318 11 00 Coach screws of iron or steel 0,038 1,364 (C) 0,475 (D) 0,066 (E) 7318 12 10 Wood screws of stainless steel (excl. coach screws) 0,038 1,154 (1) 1,116 (2) 7318 12 90 Wood screws of iron or steel other than stainless 0,038 1,364 (C) (excl. coach screws) 0,475 (D) 0,066 (E) 7318 13 00 Screw hooks and screw rings, of iron or steel 0,038 1,364 (C) 0,475 (D) 0,066 (E) 7318 14 10 Self-tapping screws, of stainless steel (excl. wood 0,038 1,154 (1) screws) 1,116 (2) 7318 14 91 Spaced-thread screws of iron or steel other than 0,038 1,364 (C) stainless 0,475 (D) 0,066 (E) 7318 14 99 Self-tapping screws of iron or steel other than 0,038 1,364 (C) stainless (excl. spaced-thread screws and wood screws) 0,475 (D) 0,066 (E) 7318 15 20 Screws and bolts, of iron or steel "whether or not 0,038 1,364 (C) with their nuts and washers", for fixing railway track 0,475 (D) construction material (excl. coach screws) 0,066 (E) 7318 15 35 Screws and bolts, of stainless steel "whether or not 0,038 1,154 (1) with their nuts and washers", without heads (excl. 1,116 (2) screws and bolts for fixing railway track construction material) 7318 15 42 Screws and bolts, of iron or steel other than stainless 0,038 1,364 (C) "whether or not with their nuts and washers", 0,475 (D) without heads, with a tensile strength of < 800 MPa 0,066 (E) (excl. screws and bolts for fixing railway track construction material) 7318 15 48 Screws and bolts, of iron or steel other than stainless 0,038 1,364 (C) "whether or not with their nuts and washers", 0,475 (D) without heads, with a tensile strength of ≥ 800 MPa 0,066 (E) (excl. screws and bolts for fixing railway track construction material) 58/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7318 15 52 Screws and bolts, of stainless steel "whether or not 0,038 1,154 (1) with their nuts and washers", with slotted or cross- 1,116 (2) recessed heads (excl. wood screws and self-tapping screws) 7318 15 58 Screws and bolts, of iron or steel other than stainless 0,038 1,364 (C) "whether or not with their nuts and washers", with 0,475 (D) slotted or cross-recessed heads (excl. wood screws and 0,066 (E) self-tapping screws) 7318 15 62 Hexagonal-socket head screws and bolts, of stainless 0,038 1,154 (1) steel "whether or not with their nuts and washers" 1,116 (2) (excl. wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) 7318 15 68 Hexagonal-socket head screws and bolts, of iron or 0,038 1,364 (C) steel other than stainless "whether or not with their 0,475 (D) nuts and washers" (excl. wood screws, self-tapping 0,066 (E) screws and screws and bolts for fixing railway track construction material) 7318 15 75 Hexagon screws and bolts, of stainless steel "whether 0,038 1,154 (1) or not with their nuts and washers" (excl. with socket 1,116 (2) head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) 7318 15 82 Hexagon screws and bolts, of iron or steel other than 0,038 1,364 (C) stainless "whether or not with their nuts and 0,475 (D) washers", with a tensile strength of < 800 MPa (excl. 0,066 (E) with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) 7318 15 88 Hexagon screws and bolts, of iron or steel other than 0,038 1,364 (C) stainless "whether or not with their nuts and 0,475 (D) washers", with a tensile strength of ≥ 800 MPa (excl. 0,066 (E) with socket head, wood screws, self-tapping screws and screws and bolts for fixing railway track construction material) 7318 15 95 Screws and bolts, of iron or steel "whether or not 0,038 1,364 (C) with their nuts and washers", with heads (excl. with 0,475 (D) slotted, cross-recessed or hexagonal head; wood 0,066 (E) screws, self-tapping screws and screws and bolts for fixing railway track construction material, screw hooks and screw rings) 7318 16 31 Blind rivet nuts of stainless steel 0,038 1,154 (1) 1,116 (2) 7318 16 39 Nuts of stainless steel (excl. blind rivet nuts) 0,038 1,154 (1) 1,116 (2) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 59/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7318 16 40 Blind rivet nuts of iron or steel other than stainless 0,038 1,364 (C) 0,475 (D) 0,066 (E) 7318 16 60 Self-locking nuts of iron or steel other than stainless 0,038 1,364 (C) 0,475 (D) 0,066 (E) 7318 16 92 Nuts of iron or steel other than stainless, with an 0,038 1,364 (C) inside diameter ≤ 12 mm (excl. blind rivet nuts and 0,475 (D) self-locking nuts) 0,066 (E) 7318 16 99 Nuts of iron or steel other than stainless, with an 0,038 1,364 (C) inside diameter > 12 mm (excl. blind rivet nuts and 0,475 (D) self-locking nuts) 0,066 (E) 7318 19 00 Threaded articles, of iron or steel, n.e.s. 0,038 1,364 (C) 0,475 (D) 0,066 (E) 7318 21 00 Spring washers and other lock washers, of iron or 0,038 1,364 (C) steel 0,475 (D) 0,066 (E) 7318 22 00 Washers of iron or steel (excl. spring washers and 0,038 1,364 (C) other lock washers) 0,475 (D) 0,066 (E) 7318 23 00 Rivets of iron or steel (excl. tubular and bifurcated 0,038 1,364 (C) rivets for particular uses) 0,475 (D) 0,066 (E) 7318 24 00 Cotters and cotter pins, of iron or steel 0,038 1,364 (C) 0,475 (D) 0,066 (E) 7318 29 00 Non-threaded articles, of iron or steel 0,038 1,364 (C) 0,475 (D) 0,066 (E) 7326 11 00 Grinding balls and similar articles for mills, of iron or 0,303 1,629 (C) steel, forged or stamped, but not further worked 0,740 (D) 0,331 (E) 7326 19 10 Articles of iron or steel, open-die forged, but not 0,303 1,629 (C) further worked, n.e.s. (excl. grinding balls and similar 0,740 (D) articles for mills) 0,331 (E) 7326 19 90 Articles of iron or steel, closed-die forged or stamped, 0,303 1,629 (C) but not further worked, n.e.s. (excl. grinding balls and 0,740 (D) similar articles for mills) 0,331 (E) 7326 20 00 Articles of iron or steel wire, n.e.s. 0,071 1,397 (C) 0,508 (D) 0,099 (E) 7326 90 30 Ladders and steps, of iron or steel 0,038 1,364 (C) 0,475 (D) 0,066 (E) 7326 90 40 Pallets and similar platforms for handling goods, of 0,038 1,364 (C) iron or steel 0,475 (D) 0,066 (E) 60/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7326 90 50 Reels for cables, piping and the like, of iron or steel 0,038 1,364 (C) 0,475 (D) 0,066 (E) 7326 90 60 Ventilators, non-mechanical, guttering, hooks and like 0,038 1,364 (C) articles used in the building industry, n.e.s., of iron or 0,475 (D) steel 0,066 (E) 7326 90 92 Articles of iron or steel, open-die forged, n.e.s. 0,303 1,629 (C) 0,740 (D) 0,331 (E) 7326 90 94 Articles of iron or steel, closed-die forged, n.e.s. 0,303 1,629 (C) 0,740 (D) 0,331 (E) 7326 90 96 Sintered articles of iron or steel, n.e.s. 0,303 1,629 (C) 0,740 (D) 0,331 (E) 7326 90 98 Articles of iron or steel, n.e.s. 0,112 1,491 (C) 0,567 (D) 0,141 (E) Aluminium 7601 10 10 Aluminium slabs, not alloyed, unwrought 1,423 (K) 1,423 (K) 0,091 (L) 0,091 (L) 7601 10 90 Aluminium, not alloyed, unwrought (excl. slabs) 1,423 (K) 1,423 (K) 0,091 (L) 0,091 (L) 7601 20 30 Unwrought aluminium alloys in the form of slabs 1,423 (K) 1,423 (K) 0,091 (L) 0,091 (L) 7601 20 40 Unwrought aluminium alloys in the form of billets 1,423 (K) 1,423 (K) 0,091 (L) 0,091 (L) 7601 20 80 Unwrought aluminium alloys (excl. slabs and billets) 1,423 (K) 1,423 (K) 0,091 (L) 0,091 (L) 7603 10 00 Powders of aluminium, of non-lamellar structure 0,046 1,506 (K) (excl. pellets of aluminium) 0,140 (L) 7603 20 00 Powders of aluminium, of lamellar structure, and 0,046 1,506 (K) flakes of aluminium (excl. pellets of aluminium, and 0,140 (L) spangles) 7604 10 10 Bars, rods and profiles, of non-alloy aluminium 0,056 1,485 (K) 0,148 (L) 7604 10 90 Profiles of non-alloy aluminium, n.e.s. 0,060 1,493 (K) 0,152 (L) 7604 21 00 Hollow profiles of aluminium alloys, n.e.s. 0,060 1,493 (K) 0,152 (L) 7604 29 10 Bars and rods of aluminium alloys 0,056 1,485 (K) 0,148 (L) 7604 29 90 Solid profiles, of aluminium alloys, n.e.s. 0,060 1,493 (K) 0,152 (L) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 61/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7605 11 00 Wire of non-alloy aluminium, with a maximum cross- 0,056 1,485 (K) sectional dimension of > 7 mm (excl. stranded wire, 0,148 (L) cables, plaited bands and the like and other articles of heading 7614, and electrically insulated wires) 7605 19 00 Wire of non-alloy aluminium, with a maximum cross- 0,056 1,485 (K) sectional dimension of ≤ 7 mm (other than stranded 0,148 (L) wires, cables, ropes and other articles of heading 7614, electrically insulated wires, strings for musical instruments) 7605 21 00 Wire of aluminium alloys, with a maximum cross- 0,056 1,485 (K) sectional dimension of > 7 mm (excl. stranded wire, 0,148 (L) cables, plaited bands and the like and other articles of heading 7614, and electrically insulated wires) 7605 29 00 Wire, of aluminium alloys, having a maximum cross- 0,056 1,485 (K) sectional dimension of ≤ 7 mm (other than stranded 0,148 (L) wires, cables, ropes and other articles of heading 7614, electrically insulated wires, strings for musical instruments) 7606 11 30 Aluminium Composite Panel, of non-alloy 0,056 1,485 (K) aluminium, of a thickness of > 0,2 mm 0,148 (L) 7606 11 50 Plates, sheets and strip, of non-alloy aluminium, of a 0,056 1,485 (K) thickness of > 0,2 mm, square or rectangular, painted, 0,148 (L) varnished or coated with plastics (excl. Aluminium Composite Panel) 7606 11 91 Plates, sheets and strip, of non-alloy aluminium, of a 0,056 1,485 (K) thickness of > 0,2 mm but < 3 mm, square or 0,148 (L) rectangular (excl. such products painted, varnished or coated with plastics, and expanded plates, sheets and strip) 7606 11 93 Plates, sheets and strip, of non-alloy aluminium, of a 0,056 1,485 (K) thickness of ≥ 3 mm but < 6 mm, square or 0,148 (L) rectangular (excl. such products painted, varnished or coated with plastics) 7606 11 99 Plates, sheets and strip, of non-alloy aluminium, of a 0,056 1,485 (K) thickness of ≥ 6 mm, square or rectangular (excl. such 0,148 (L) products painted, varnished or coated with plastics) 7606 12 11 Beverage can body stock, of aluminium alloys, of a 0,056 1,485 (K) thickness of > 0,2 mm 0,148 (L) 7606 12 19 Beverage can end stock and tab stock, of aluminium 0,056 1,485 (K) alloys, of a thickness of > 0,2 mm 0,148 (L) 7606 12 30 Aluminium Composite Panel, of aluminium alloys, of 0,056 1,485 (K) a thickness of > 0,2 mm 0,148 (L) 62/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7606 12 50 Plates, sheets and strip, of aluminium alloys, of a 0,056 1,485 (K) thickness of > 0,2 mm, square or rectangular, painted, 0,148 (L) varnished or coated with plastics (excl. beverage can body stock, end stock and tab stock, and Aluminium Composite Panel) 7606 12 92 Plates, sheets and strip, of aluminium alloys, of a 0,056 1,485 (K) thickness of > 0,2 mm but < 3 mm, square or 0,148 (L) rectangular (excl. painted, varnished or coated with plastics, expanded plates, sheets and strip, beverage can body stock, end stock and tab stock) 7606 12 93 Plates, sheets and strip, of aluminium alloys, of a 0,056 1,485 (K) thickness of ≥ 3 mm but < 6 mm, square or 0,148 (L) rectangular (excl. such products painted, varnished or coated with plastics) 7606 12 99 Plates, sheets and strip, of aluminium alloys, of a 0,056 1,485 (K) thickness of ≥ 6 mm, square or rectangular (excl. such 0,148 (L) products painted, varnished or coated with plastics) 7606 91 00 Plates, sheets and strip, of non-alloy aluminium, of a 0,056 1,485 (K) thickness of > 0,2 mm (other than square or 0,148 (L) rectangular) 7606 92 00 Plates, sheets and strip, of aluminium alloys, of a 0,056 1,485 (K) thickness of > 0,2 mm (other than square or 0,148 (L) rectangular) 7607 11 11 Aluminium foil, not backed, rolled but not further 0,166 1,599 (K) worked, of a thickness of < 0,021 mm, in rolls of a 0,258 (L) weight of ≤ 10 kg (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) 7607 11 19 Aluminium foil, not backed, rolled but not further 0,166 1,599 (K) worked, of a thickness of < 0,021 mm (excl. stamping 0,258 (L) foils of heading 3212, and foil made up as christmas tree decorating material and in rolls of a weight ≤ 10 kg) 7607 11 90 Aluminium foil, not backed, rolled but not further 0,166 1,599 (K) worked, of a thickness of ≥ 0,021 mm but ≤ 2 mm 0,258 (L) (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) 7607 19 10 Aluminium foil, not backed, rolled and further 0,166 1,599 (K) worked, of a thickness of < 0,021 mm (excl. stamping 0,258 (L) foils of heading 3212, and foil made up as christmas tree decorating material) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 63/65EN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7607 19 90 Aluminium foil, not backed, rolled and further 0,166 1,599 (K) worked, of a thickness (excl. any backing) from 0,258 (L) 0,021 mm to 0,2 mm (excl. stamping foils of heading 3212, and foil made up as christmas tree decorating material) 7607 20 10 Aluminium foil, backed, of a thickness (excl. any 0,166 1,599 (K) backing) of < 0,021 mm (excl. stamping foils of 0,258 (L) heading 3212, and foil made up as christmas tree decorating material) 7607 20 91 Aluminium Composite Panel, of a thickness 0,166 1,599 (K) ≤ 0,2 mm 0,258 (L) 7607 20 99 Aluminium foil, backed, of a thickness (excl. any 0,166 1,599 (K) backing) of ≥ 0,021 mm but ≤ 0,2 mm (excl. 0,258 (L) stamping foils of heading 3212, foil made up as christmas tree decorating material, and Aluminium Composite Panel) 7608 10 00 Tubes and pipes of non-alloy aluminium (excl. hollow 0,060 1,493 (K) profiles) 0,152 (L) 7608 20 20 Tubes and pipes of aluminium alloys, welded (excl. 0,060 1,493 (K) hollow profiles) 0,152 (L) 7608 20 81 Tubes and pipes of aluminium alloys, not further 0,060 1,493 (K) worked than extruded (excl. hollow profiles) 0,152 (L) 7608 20 89 Tubes and pipes of aluminium alloys (excl. such 0,060 1,493 (K) products welded or not further worked than 0,152 (L) extruded, and hollow profiles) 7609 00 00 Aluminium tube or pipe fittings "e.g., couplings, 0,060 1,493 (K) elbows, sleeves" 0,152 (L) 7610 10 00 Doors, windows and their frames and thresholds for 0,060 1,493 (K) door, of aluminium (excl. door furniture) 0,152 (L) 7610 90 10 Bridges and bridge-sections, towers and lattice masts, 0,060 1,493 (K) of aluminium 0,152 (L) 7610 90 90 Structures and parts of structures, of aluminium, 0,060 1,493 (K) n.e.s., and plates, rods, profiles, tubes and the like, 0,152 (L) prepared for use in structures, of aluminium, n.e.s. (excl. prefabricated buildings of heading 9406, doors and windows and their frames and thresholds for doors, bridges and bridge-sections, towers and lattice masts) 7611 00 00 Reservoirs, tanks, vats and similar containers, of 0,166 1,594 (K) aluminium, for any material (other than compressed 0,258 (L) or liquefied gas), of a capacity of > 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excl. containers specifically constructed or equipped for one or more types of transport) 64/65 ELI: http://data.europa.eu/eli/reg_impl/2025/2620/ojEN OJ L, 22.12.2025 Column A Column B CN code CN Description BMg* [tCO e/t] BMg [tCO e/t] 2 2 7612 10 00 Collapsible tubular containers, of aluminium 0,166 1,594 (K) 0,258 (L) 7612 90 20 Containers of a kind used for aerosols, of aluminium 0,166 1,594 (K) 0,258 (L) 7612 90 30 Casks, drums, cans, boxes and similar containers, of 0,166 1,594 (K) aluminium, manufactured from foil of a thickness 0,258 (L) ≤ 0,2 mm 7612 90 80 Casks, drums, cans, boxes and similar containers 0,166 1,594 (K) ≤ 300 l, of aluminium, for any material (other than 0,258 (L) compressed or liquefied gas), n.e.s. (other than collapsible tubular containers, containers for aerosols and containers manufactured from foil of a thickness ≤ 0,2 mm 7613 00 00 Aluminium containers for compressed or liquefied 0,166 1,594 (K) gas 0,258 (L) 7614 10 00 Stranded wire, cables, plaited bands and the like, of 0,056 1,485 (K) aluminium, with steel core (excl. such products 0,148 (L) electrically insulated) 7614 90 00 Stranded wires, cables, ropes and similar articles, of 0,056 1,485 (K) aluminium (other than with steel core and electrically 0,148 (L) insulated products) 7616 10 00 Nails, tacks, staples, screws, bolts, nuts, screw hooks, 0,056 1,485 (K) rivets, cotters, cotter pins, washers and similar 0,148 (L) articles, of aluminium (excl. staples in strips, plugs, bungs and the like, threaded) 7616 91 00 Cloth, grill, netting and fencing, of aluminium wire 0,056 1,485 (K) (excl. cloth of metal fibres for clothing, lining and 0,148 (L) similar uses, and cloth, grill and netting made into hand sieves or machine parts) 7616 99 10 Articles of aluminium, cast, n.e.s. 0,046 1,506 (K) 0,140 (L) 7616 99 90 Articles of aluminium, uncast, n.e.s. 0,056 1,485 (K) 0,148 (L) ELI: http://data.europa.eu/eli/reg_impl/2025/2620/oj 65/65