Official Gazette Notification Text
Official TranscriptOfficial Journal EN of the European Union L series 2026/700 20.3.2026 COMMISSION IMPLEMENTING REGULATION(EU) 2026/700 of 4 March 2026 amending Implementing Regulation (EU) 2024/2651 as regards administrative changes to the Union authorisation of the biocidal product family ‘Taski-Room Care-Suma Family based on Lactic Acid’ (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the...
Official Journal EN of the European Union L series 2026/700 20.3.2026 COMMISSION IMPLEMENTING REGULATION(EU) 2026/700 of 4 March 2026 amending Implementing Regulation (EU) 2024/2651 as regards administrative changes to the Union authorisation of the biocidal product family ‘Taski-Room Care-Suma Family based on Lactic Acid’ (Text with EEA relevance) THE EUROPEAN COMMISSION, Having regard to the Treaty on the Functioning of the European Union, Having regard to Regulation (EU) No 528/2012 of the European Parliament and of the Council of 22 May 2012 concerning the making available on the market and use of biocidal products(1), and in particular Article 50(2) thereof,
Whereas:
(1) On 10 October 2024, Commission Implementing Regulation (EU) 2024/2651(2) granted a Union authorisation, under number EU-0031644-0000, to Diversey Europe Operations B.V. for the making available on the market and use of the biocidal product family ‘Taski-Room Care-Suma Family Based on Lactic Acid’. The Annex to that Implementing Regulation provides the summary of product characteristics for that biocidal product family.
(2) On 9 April 2025, Diversey Europe Operations B.V. submitted to the European Chemicals Agency (‘the Agency’), in accordance with Article 11(1) of Commission Implementing Regulation (EU) No 354/2013(3), a notification of administrative changes to the Union authorisation for the biocidal product family ‘Taski-Room Care-Suma Family Based on Lactic Acid’, recorded in the Register for Biocidal Products (‘Register’) under case number BC-KW105377-13. The notified proposed changes to that authorisation concern changes to the address of the authorisation holder and the biocidal product manufacturer.
(3) On 28 April 2025, the Agency submitted to the Commission, in accordance with Article 11(3) of Implementing Regulation (EU) No 354/2013, an opinion(4)on the notified administrative changes to the Union authorisation for the biocidal product family ‘Taski-Room Care-Suma Family Based on Lactic Acid’. In its opinion, the Agency concluded that the proposed changes are administrative changes as referred to in Article 50(3), point (a), of Regulation (EU) No 528/2012 and as specified in Title 1 of the Annex to Implementing Regulation (EU) No 354/2013, and that, after the implementation of the changes, the conditions of Article 19 of Regulation (EU) No 528/2012 will still be met.
(4) On 28 April 2025, the Agency transmitted to the Commission a revised summary of product characteristics for the biocidal product family ‘Taski-Room Care-Suma Family Based on Lactic Acid’ in all official languages of the Union, covering the administrative changes applied for, in accordance with Article 11(6) of Implementing Regulation (EU) No 354/2013.
(1) OJ L 167, 27.6.2012, p. 1, ELI: http://data.europa.eu/eli/reg/2012/528/oj.
(2) Commission Implementing Regulation (EU) 2024/2651 of 10 October 2024 granting a Union authorisation for the biocidal product family Taski-Room Care-Suma Family based on Lactic Acid in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L, 2024/2651, 11.10.2024, ELI: http://data.europa.eu/eli/reg_impl/2024/2651/oj).
(3) Commission Implementing Regulation (EU) No 354/2013 of 18 April 2013 on changes of biocidal products authorised in accordance with Regulation (EU) No 528/2012 of the European Parliament and of the Council (OJ L 109, 19.4.2013, p. 4, ELI: http://data.europa.
eu/eli/reg_impl/2013/354/oj).
(4) ECHA Opinion No UAD-C-1818195-15-00/F of 28 April 2025 on the administrative changes of the Union authorisation of the biocidal product family ‘Taski-Room Care-Suma Family Based on Lactic Acid’, https://echa.europa.eu/opinions-on-applications-for- union-authorisation.
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 1/53EN OJ L, 20.3.2026
(5) The Commission concurs with the opinion of the Agency and therefore considers it appropriate to amend the Union authorisation for the biocidal product family ‘Taski-Room Care-Suma Family Based on Lactic Acid’ to introduce the administrative changes requested by Diversey Europe Operations B.V..
(6) Except for the amendments regarding the proposed administrative changes, all other information included in the summary of product characteristics of ‘Taski-Room Care-Suma Family Based on Lactic Acid’, as set out in the Annex to Implementing Regulation (EU) 2024/2651, remains unchanged.
(7) In order to enhance clarity and to ease the access of users and interested parties to the consolidated version of the summary of product characteristics which is to be published by the Agency, the Annex to Implementing Regulation
(EU) 2024/2651 should be replaced in its entirety. Due to a change in the format used for the generation of the summary of product characteristics in the Register in February 2024, the summary of product characteristics in that Annex should also include some minor editorial and layout changes.
(8) Implementing Regulation (EU) 2024/2651 should therefore be amended accordingly,
HAS ADOPTED THIS REGULATION:
Article 1 The Annex to Implementing Regulation (EU) 2024/2651 is replaced by the text set out in the Annex to this Regulation.
Article 2 This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 4 March 2026.
For the Commission The President Ursula VON DER LEYEN 2/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026 ANNEX SUMMARY OF PRODUCT CHARACTERISTICS FOR A BIOCIDAL PRODUCT FAMILY Taski-Room Care-Suma Family Based on Lactic Acid Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene Authorisation numberEU-0031644-0000 R4BP asset numberEU-0031644-0000 PART I.
FIRST INFORMATION LEVEL
1. ADMINISTRATIVE INFORMATION
1.1. Family name Name Taski-Room Care-Suma Family Based on Lactic Acid
1.2. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene
1.3. Authorisation holder Name and address of the authorisation holder Name Diversey Europe Operations B.V.
Address De Corridor 4 (Regulatory team) 3621 ZB Breukelen NL Authorisation number EU-0031644-0000 R4BP asset number EU-0031644-0000 Date of the authorisation 31/10/2024 Expiry date of the authorisation 30/09/2034
1.4. Manufacturer(s) of the product Name of manufacturer Diversey Europe Operations B.V.
Address of manufacturer De Corridor 4 (Regulatory team) 3621 ZB Breukelen Netherlands (the)
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 3/53EN OJ L, 20.3.2026 Location of manufacturing sites Diversey Europe Operations B.V. site 1 Strada Statale 235 26010 Bagnolo Cremasco (CR) Italy Diversey Europe Operations B.V. site 2 Rembrandtlaan 414 7545 ZW Enschede Netherlands (the) Diversey Europe Operations B.V. site 3 Cotes Park Industrial Estate DE55 4PA Somercotes Alfreton United Kingdom of Great Britain and Northern Ireland (the) Diversey Europe Operations B.V. site 4 Avenida Conde Duque 5, 7 y 9 ; Poligono Industrial La Postura 28343 Valdemoro (Madrid) Spain Diversey Europe Operations B.V. site 5 Morschheimer Strasse 12 67292 Kirchheimbolanden Germany Name of manufacturer Multifill B.V.
Address of manufacturer Constructieweg 25-A 3641 SB Mijdrecht Netherlands
(the) Location of manufacturing sites Multifill B.V. site 1 Constructieweg 25-A 3641 SB Mijdrecht Netherlands (the) Name of manufacturer Ionic Products Ltd Address of manufacturer Blaris Industrial Estate, Altona Road BT27 5QB Lisburn Ireland Location of manufacturing sites Ionic Products Ltd site 1 Blaris Industrial Estate, Altona Road BT27 5QB Lisburn Ireland Name of manufacturer Aerosol Service Sp. z o.o.
Address of manufacturer Charnowo 3676-270 Ustka Poland Location of manufacturing sites Aerosol Service Sp. z o.o. site 1 Charnowo 3676-270 Ustka Poland Name of manufacturer Orvema B.V.
Address of manufacturer Westkanaaldijk 26-I 3606 AM Maarssen Netherlands
(the) Location of manufacturing sites Orvema B.V. site 1 Westkanaaldijk 26-I 3606 AM Maarssen Netherlands (the) Name of manufacturer Cheport spol s.r.o.
Address of manufacturer Lhotsko 93 76312 Vizovice Czechia Location of manufacturing sites Cheport spol s.r.o. site 1 Lhotsko 93 76312 Vizovice Czechia 4/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026 Name of manufacturer Helichem B.V.
Address of manufacturer Kozakkenberg 5 5951 DL Belfeld Netherlands (the) Location of manufacturing sites Helichem B.V. site 1 Kozakkenberg 5 5951 DL Belfeld Netherlands (the) Name of manufacturer Pluswipes LTD Address of manufacturer Pywell Rd, Willowbrook, East Industrial Estate NN17 5XJ Corby United Kingdom of Great Britain and Northern Ireland (the) Location of manufacturing sites Pluswipes LTD site 1 Pywell Rd, Willowbrook, East Industrial Estate NN17 5XJ Corby United Kingdom of Great Britain and Northern Ireland (the)
1.5. Manufacturer(s) of the active substance(s) Active substance L-(+)-lactic acid Name of manufacturer Purac Biochem bv Address of manufacturer Arkelsedijk 46 4206 AC Gorinchem Netherlands (the) Location of manufacturing sites Purac Biochem bv site 1 Gran Vial 19-25 08160 Montmelo Spain Active substance L-(+)-lactic acid Name of manufacturer Jungbunzlauer S.A.
Address of manufacturer Z.I. el Portuaire, B.P. 32 67390 Marckolsheim France Location of manufacturing sites Jungbunzlauer S.A. site 1 Z.I. el Portuaire, B.P. 32 67390 Marckolsheim France
2. PRODUCT FAMILY COMPOSITION AND FORMULATION
2.1. Qualitative and quantitative information on the composition of the family Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 0,352 - 17,6 % substance (w/w) Methanesulfonic Non-active 75-75-2 200-898-6 0 - 5,11 % (w/w) acid substance Alkyl ether Non-active 53563-70-5 0 - 9 % (w/w) carboxylic acid substance
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 5/53EN OJ L, 20.3.2026 Common name IUPAC name Function CAS number EC number Content (%) Sulphonic acids, Non-active 97489-15-1 307-055-2 0 - 3 % (w/w) C14-17-sec- substance alkane, sodium salts
A mixture of: Non-active 414-420-0 0 - 3,9 % (w/w) 2-ethylhexyl substance mono-D- glucopyranoside;
2-ethylhexyl di-D- glucopyranoside
2.2. Type(s) of formulation Formulation type(s) AL Any other liquid SL Soluble concentrate PART II.
SECOND INFORMATION LEVEL META SPC(S)
1. META SPC 1 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 1 identifier
Identifier Meta SPC: Meta SPC 1
1.2. Suffix to the authorisation number Number 1-1
1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene
2. META SPC 1 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 17,6 - 17,6 % (w/ substance w) Methanesulfonic Non-active 75-75-2 200-898-6 5,11 - 5,11 % (w/ acid substance w) 6/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026 Common name IUPAC name Function CAS number EC number Content (%) Alkyl ether Non-active 53563-70-5 9 - 9 % (w/w) carboxylic acid substance Sulphonic acids, Non-active 97489-15-1 307-055-2 3 - 3 % (w/w) C14-17-sec- substance alkane, sodium salts
A mixture of: Non-active 414-420-0 3,9 - 3,9 % (w/w) 2-ethylhexyl substance mono-D- glucopyranoside;
2-ethylhexyl di-D- glucopyranoside
2.2. Type(s) of formulation of the meta SPC 1 Formulation type(s) SL Soluble concentrate
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 1 Hazard statements H314: Causes severe skin burns and eye damage.
H290: May be corrosive to metals.
EUH071: Corrosive to the respiratory tract.
Precautionary statements P260: Do not breathe vapours.
P280: Wear protective gloves, protective clothing, eye protection, face protection.
P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310: Immediately call a doctor or a physician.
P405: Store locked up.
P501: Dispose of contents to in accordance with national regulations.
P501: Dispose of container to in accordance with national regulations.
P234: Keep only in original packaging.
P321: Specific treatment (see instruction on this label).
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 7/53EN OJ L, 20.3.2026
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description Table 1.
Use # 1a - Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport).
Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Enveloped viruses
Common name: Enveloped viruses
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport).
Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected).
Dilute the product to 2% v/v (2 ml product, add water up to 100 ml).
Number and timing of application:
Contact time:
Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes Category(ies) of users Professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5.0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene; PA - Polyamide) 8/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
4.1.1. Use-specific instructions for use Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry.
No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.1.2. Use-specific risk mitigation measures See general directions for use.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
4.2. Use description Table 2.
Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Enveloped viruses only
Common name: Enveloped viruses only
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport).
Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 9/53EN OJ L, 20.3.2026 Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected).
Dilute the product to 2% v/v (2 ml product, add water up to 100 ml).
Number and timing of application:
Contact time: 15 minutes Category(ies) of users Professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE, 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide).
4.2.1. Use-specific instructions for use Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.2.2. Use-specific risk mitigation measures See general directions for use.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
4.3. Use description Table 3.
Use # 2 - Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area).
Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Where relevant, an exact description of the - authorised use 10/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026 Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data
Scientific name: Enveloped viruses only
Common name: Enveloped viruses only
Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area).
Application method(s) Method: manual application
Detailed description:
Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2). Dilute the product to 2% v/v (2 ml product, add water up to 100 ml).
Number and timing of application:
Contact time: 5 minutes Category(ies) of users Professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide).
4.3.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product.
Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step.
Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.3.2. Use-specific risk mitigation measures See general directions for use.
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 11/53EN OJ L, 20.3.2026
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
4.4. Use description Table 4.
Use # 3 - Disinfection of clean hard non-porous surfaces and small objects in a veterinary area Product type PT03: Veterinary hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces and small objects in a veterinary area.
Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 3% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected for 5 minutes and apply approx. 19 sprays /m2or 25 ml/m2for 30 minutes). Dilute the product to 3% v/v (3 ml product, add water up to 100 ml).
Number and timing of application:
Contact time: 5 minutes at room temperature (18-25 °C); 30 minutes at 10 °C Category(ies) of users Professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide).
12/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
4.4.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product.
Dilute the product with potable water to 3,0% (3 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 5 minutes at room temperature or for 30 minutes at 10°C. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.4.2. Use-specific risk mitigation measures See general directions for use.
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
4.5. Use description Table 5.
Use # 4 – Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area). For example, ice-cream and shake machines, open plant cleaning in food factories or hard surfaces in kitchens.
Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 13/53EN OJ L, 20.3.2026 Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 3% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected).
Dilute the product to 3% v/v (3 ml product, add water up to 100 ml).
Number and timing of application:
Contact time: 5 minutes Category(ies) of users Professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide).
4.5.1. Use-specific instructions for use Dilute the product with potable water to 3,0% (3 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.5.2. Use-specific risk mitigation measures See general directions for use.
4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 1
5.1. Instructions for use Comply with the instructions for use.
Inform the authorisation holder if the treatment is ineffective.
5.2. Risk mitigation measures Wear protective chemical resistant gloves classified under EN 374 or equivalent, face protection consistent with EN 16321 or equivalent and a coverall consistent with EN 14605 or equivalent when handling the concentrate product (during dilution). The full texts of the EN standards are available in Section 6. Personal protective equipment (PPE) material to be specified by the authorisation holder within the product information. This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See
section 6 for the full reference to this act.
14/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026 Do not breathe vapour.
Avoid contact with eyes and skin.
Avoid splashes and spills during mixing and loading (dilution).
Wash hands after handling.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a Poison Centre or a doctor.
IF ON SKIN: Immediately wash with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance.
Information to Healthcare personnel/doctor: the eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
IF SWALLOWED: Immediately rinse mouth. Do NOT induce vomiting. Give something to drink, if exposed person is able to swallow. Call 112 or an ambulance for medical assistance.
5.4. Instructions for safe disposal of the product and its packaging Dispose of unused product, its packaging and all other waste in accordance with local regulations.
Do not discharge unused product on the ground, into water sources, into pipes nor down the drains.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Store in original container tightly closed. Store protected from light.
Do not store above 40 °C.
Shelf- life: 2 years.
6. OTHER INFORMATION The full titles of the EN standards referenced in section 5.2 “Risk mitigation measures” are:
EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]).
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11).
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 15/53EN OJ L, 20.3.2026
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 1
7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) TASKI Sani 4 in 1 Market area: EU Plus Authorisation number EU-0031644-0001 1-1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 17,6 % (w/w) substance Methanesulfonic Non-active 75-75-2 200-898-6 5,11 % (w/w) acid substance Alkyl ether Non-active 53563-70-5 9 % (w/w) carboxylic acid substance Sulphonic acids, Non-active 97489-15-1 307-055-2 3 % (w/w) C14-17-sec- substance alkane, sodium salts
A mixture of: Non-active 414-420-0 3,9 % (w/w) 2-ethylhexyl substance mono-D- glucopyranoside;
2-ethylhexyl di-D- glucopyranoside
7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ANDY Market area: EU MultiPower Conc Professional
ANDYSAN Market area: EU MultiPower Conc Professional
CIF MultiPower Market area: EU Conc Professional Cif 4in1 Cleaner Market area: EU Disinfectant Concentrate
DOMESTOS Market area: EU MultiPower Conc Professional 16/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026 Domestos 4in1 Market area: EU Cleaner Disinfectant Concentrate
FLORASZEPT Market area: EU MultiPower Conc Professional
GLORIX Market area: EU MultiPower Conc Professional Glorix 4in1 Market area: EU Cleaner Disinfectant Concentrate
JIF MultiPower Market area: EU Conc Professional
KLINEX Market area: EU MultiPower Conc Professional Klinex 4in1 Market area: EU Cleaner Disinfectant Concentrate
LIFEBUOY Market area: EU MultiPower Conc Professional
LYSOFORM Market area: EU MultiPower Conc Professional Lysoform 4in1 Market area: EU Cleaner Disinfectant Concentrate Metro Prof. 4 in 1 Market area: EU Plus Conc OPTIMAX 4 in 1 Market area: EU Plus Conc
SAVO Market area: EU MultiPower Conc Professional Suma San 4in1 Market area: EU D10.7
SUPERANDY Market area: EU MultiPower Conc Professional TASKI Sani 4 in 1 Market area: EU Plus Conc
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 17/53EN OJ L, 20.3.2026
VISS MultiPower Market area: EU Conc Professional Viss 4in1 Cleaner Market area: EU Disinfectant Concentrate We Clean 4 in 1 Market area: EU Plus Conc Authorisation number EU-0031644-0002 1-1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 17,6 % (w/w) substance Methanesulfonic Non-active 75-75-2 200-898-6 5,11 % (w/w) acid substance Alkyl ether Non-active 53563-70-5 9 % (w/w) carboxylic acid substance Sulphonic acids, Non-active 97489-15-1 307-055-2 3 % (w/w) C14-17-sec- substance alkane, sodium salts
A mixture of: Non-active 414-420-0 3,9 % (w/w) 2-ethylhexyl substance mono-D- glucopyranoside;
2-ethylhexyl di-D- glucopyranoside
7.3. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Divosan Freed Market area: EU Conc SANO-Premium- Market area: EU Plus Suma Ice & Shake Market area: EU Sanitizer Sure Ice & Shake Market area: EU Sanitizer
Sure Sanitizer Market area: EU
SURE Sanitizer A Market area: EU TASKI Sani 4 in 1 Market area: EU FREE Conc TASKI Sani 4 in 1 Market area: EU ZERO Conc 18/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026 Authorisation number EU-0031644-0003 1-1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 17,6 % (w/w) substance Methanesulfonic Non-active 75-75-2 200-898-6 5,11 % (w/w) acid substance Alkyl ether Non-active 53563-70-5 9 % (w/w) carboxylic acid substance Sulphonic acids, Non-active 97489-15-1 307-055-2 3 % (w/w) C14-17-sec- substance alkane, sodium salts
A mixture of: Non-active 414-420-0 3,9 % (w/w) 2-ethylhexyl substance mono-D- glucopyranoside;
2-ethylhexyl di-D- glucopyranoside
7.4. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) SURE Sanitizer B Market area: EU Authorisation number EU-0031644-0004 1-1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 17,6 % (w/w) substance Methanesulfonic Non-active 75-75-2 200-898-6 5,11 % (w/w) acid substance Alkyl ether Non-active 53563-70-5 9 % (w/w) carboxylic acid substance Sulphonic acids, Non-active 97489-15-1 307-055-2 3 % (w/w) C14-17-sec- substance alkane, sodium salts
A mixture of: Non-active 414-420-0 3,9 % (w/w) 2-ethylhexyl substance mono-D- glucopyranoside;
2-ethylhexyl di-D- glucopyranoside
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 19/53EN OJ L, 20.3.2026
7.5. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) SURE Sanitizer C Market area: EU
Sure Sanitizer Market area: EU 4in1
Sure Sanitizer Market area: EU 4in1 Fresh Authorisation number EU-0031644-0005 1-1 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 17,6 % (w/w) substance Methanesulfonic Non-active 75-75-2 200-898-6 5,11 % (w/w) acid substance Alkyl ether Non-active 53563-70-5 9 % (w/w) carboxylic acid substance Sulphonic acids, Non-active 97489-15-1 307-055-2 3 % (w/w) C14-17-sec- substance alkane, sodium salts
A mixture of: Non-active 414-420-0 3,9 % (w/w) 2-ethylhexyl substance mono-D- glucopyranoside;
2-ethylhexyl di-D- glucopyranoside
1. META SPC 2 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 2 identifier
Identifier Meta SPC: Meta SPC 2
1.2. Suffix to the authorisation number Number 1-2 20/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene
2. META SPC 2 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 2 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 17,6 - 17,6 % (w/ substance w) Methanesulfonic Non-active 75-75-2 200-898-6 5,11 - 5,11 % (w/ acid substance w) Alkyl ether Non-active 53563-70-5 9 - 9 % (w/w) carboxylic acid substance Sulphonic acids, Non-active 97489-15-1 307-055-2 3 - 3 % (w/w) C14-17-sec- substance alkane, sodium salts
A mixture of: Non-active 414-420-0 3,9 - 3,9 % (w/w) 2-ethylhexyl substance mono-D- glucopyranoside;
2-ethylhexyl di-D- glucopyranoside
2.2. Type(s) of formulation of the meta SPC 2 Formulation type(s) SL Soluble concentrate
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 2 Hazard statements H314: Causes severe skin burns and eye damage.
H290: May be corrosive to metals.
EUH071: Corrosive to the respiratory tract.
EUH208: Contains Ethyl 2,3-epoxy-3-phenylbutyrate, Delta-damascone and Damascone. May produce an allergic reaction.
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 21/53EN OJ L, 20.3.2026 Precautionary statements P260: Do not breathe vapours.
P280: Wear protective gloves, protective clothing, eye protection, face protection.
P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310: Immediately call a doctor or a physician.
P405: Store locked up.
P501: Dispose of contents to in accordance with national regulations.
P501: Dispose of container to in accordance with national regulations.
P234: Keep only in original packaging.
P321: Specific treatment (see instruction on this label).
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description Table 1.
Use # 1a - Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport).
Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Enveloped viruses
Common name: Enveloped viruses
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport).
Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
22/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026 Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution fo the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected).
Dilute the product to 2% v/v (2 ml product, add water up to 100 ml).
Number and timing of application:
Contact time:
Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes Category(ies) of users Professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide)
4.1.1. Use-specific instructions for use Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry.
No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.1.2. Use-specific risk mitigation measures See general directions for use.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 23/53EN OJ L, 20.3.2026
4.2. Use description Table 2.
Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Enveloped viruses only
Common name: Enveloped viruses only
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport).
Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected).
Dilute the product to 2% v/v (2 ml product, add water up to 100 ml).
Number and timing of application:
Contact time: 15 minutes Category(ies) of users Professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide).
4.2.1. Use-specific instructions for use Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
24/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
4.2.2. Use-specific risk mitigation measures See general directions for use.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
4.3. Use description Table 3.
Use # 2 – Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area).
Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data
Scientific name: Enveloped viruses only
Common name: Enveloped viruses only
Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area).
Application method(s) Method: manual application
Detailed description:
Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 2% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2). Dilute the product to 2% v/v (2 ml product, add water up to 100 ml).
Number and timing of application:
Contact time: 5 minutes Category(ies) of users professional
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 25/53EN OJ L, 20.3.2026 Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide).
4.3.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product.
Dilute the product with potable water to 2,0% (2 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step.
Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.3.2. Use-specific risk mitigation measures See general directions for use.
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
4.4. Use description Table 4.
Use # 3 - Disinfection of clean hard non-porous surfaces and small objects in a veterinary area Product type PT03: Veterinary hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces and small objects in a veterinary area.
26/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026 Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 3% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected for 5 minutes and apply approx. 19 sprays /m2or 25 ml/m2for 30 minutes). Dilute the product to 3% v/v (3 ml product, add water up to 100 ml).
Number and timing of application:
Contact time: 5 minutes at room temperature (18-25 °C); 30 minutes at 10 °C Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5; 3,0 litres Canister, HDPE: 2.0; 2.5; 3.0; 5.0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide).
4.4.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product.
Dilute the product with potable water to 3,0% (3 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product.The solution for dipping shall be used only once.
Leave wet for 5 minutes at room temperature or for 30 minutes at 10°C. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.4.2. Use-specific risk mitigation measures See general directions for use.
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 27/53EN OJ L, 20.3.2026
4.5. Use description Table 5.
Use # 4 – Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area). For example, ice-cream and shake machines, open plant cleaning in food factories or hard surfaces in kitchens.
Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 3% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected).
Dilute the product to 3% v/v (3 ml product, add water up to 100 ml).
Number and timing of application:
Contact time: 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide).
4.5.1. Use-specific instructions for use Dilute the product with potable water to 3,0% (3 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
28/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
4.5.2. Use-specific risk mitigation measures See general directions for use.
4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 2
5.1. Instructions for use Comply with the instructions for use.
Inform the authorisation holder if the treatment is ineffective.
5.2. Risk mitigation measures Wear protective chemical resistant gloves classified under EN 374 or equivalent, face protection consistent with EN 16321 or equivalent and a coverall consistent with EN 14605 or equivalent when handling the concentrate product (during dilution). The full texts of the EN standards are available in Section 6. Personal protective equipment (PPE) material to be specified by the authorisation holder within the product information. This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See
section 6 for the full reference to this act.
Do not breathe vapour.
Avoid contact with eyes and skin.
Avoid splashes and spills during mixing and loading (dilution).
Wash hands after handling.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a Poison Centre or a doctor.
IF ON SKIN: Immediately wash with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance.
Information to Healthcare personnel/doctor: the eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
IF SWALLOWED: Immediately rinse mouth. Do NOT induce vomiting. Give something to drink, if exposed person is able to swallow. Call 112 or an ambulance for medical assistance.
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 29/53EN OJ L, 20.3.2026
5.4. Instructions for safe disposal of the product and its packaging Dispose of unused product, its packaging and all other waste in accordance with local regulations.
Do not discharge unused product on the ground, into water sources, into pipes nor down the drains.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Store in original container tightly closed. Store protected from light.
Do not store above 40 °C.
Shelf- life: 2 years.
6. OTHER INFORMATION The full titles of the EN standards referenced in section 5.2 “Risk mitigation measures” are:
EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]).
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 2
7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Sure Freshener Market area: EU Conc
Sure Freshener Market area: EU 7X Conc
Sure Sanitiser Market area: EU Conc Sure Sanitiser 2X Market area: EU Conc TASKI Sani 4 in 1 Market area: EU Freshener Conc TASKI Sani 4 in 1 Market area: EU Freshener Concentrate
Zenith Freshener Market area: EU Conc
Zenith Freshener Market area: EU 7X Conc
Zenith Sanitiser Market area: EU Conc 30/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
Zenith Sanitiser Market area: EU 2X Conc 7X FRESHENER Market area: EU CONCENTRATE Authorisation number EU-0031644-0006 1-2 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 17,6 % (w/w) substance Methanesulfonic Non-active 75-75-2 200-898-6 5,11 % (w/w) acid substance Alkyl ether Non-active 53563-70-5 9 % (w/w) carboxylic acid substance Sulphonic acids, Non-active 97489-15-1 307-055-2 3 % (w/w) C14-17-sec- substance alkane, sodium salts
A mixture of: Non-active 414-420-0 3,9 % (w/w) 2-ethylhexyl substance mono-D- glucopyranoside;
2-ethylhexyl di-D- glucopyranoside
1. META SPC 3 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 3 identifier
Identifier Meta SPC: Meta SPC 3
1.2. Suffix to the authorisation number Number 1-3
1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area PT03: Veterinary hygiene
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 31/53EN OJ L, 20.3.2026
2. META SPC 3 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 3 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 8,8 - 8,8 % (w/w) substance Methanesulfonic Non-active 75-75-2 200-898-6 2,56 - 2,56 % (w/ acid substance w) Alkyl ether Non-active 53563-70-5 4,5 - 4,5 % (w/w) carboxylic acid substance
2.2. Type(s) of formulation of the meta SPC 3 Formulation type(s) SL Soluble concentrate
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 3 Hazard statements H314: Causes severe skin burns and eye damage.
H290: May be corrosive to metals.
EUH071: Corrosive to the respiratory tract.
Precautionary statements P260: Do not breathe vapours.
P280: Wear protective gloves, protective clothing, eye protection, face protection.
P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310: Immediately call a doctor or a physician.
P405: Store locked up.
P501: Dispose of contents to in accordance with national regulations.
P501: Dispose of container to in accordance with national regulations.
P234: Keep only in original packaging.
P321: Specific treatment (see instruction on this label).
32/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description Table 1.
Use # 1a - Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport).
Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Enveloped viruses
Common name: Enveloped viruses
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport).
Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 4% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected).
Dilute the product to 4% v/v (4 ml product, add water up to 100 ml).
Number and timing of application:
Contact time:
Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide)
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 33/53EN OJ L, 20.3.2026
4.1.1. Use-specific instructions for use Dilute the product with potable water to 4,0% (4 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry.
No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.1.2. Use-specific risk mitigation measures See general directions for use.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
4.2. Use description Table 2.
Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Enveloped viruses only
Common name: Enveloped viruses only
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport).
Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
34/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026 Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 4% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected).
Dilute the product to 4% v/v (4 ml product, add water up to 100 ml).
Number and timing of application:
Contact time: 15 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0.8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5: 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - poylamide).
4.2.1. Use-specific instructions for use Dilute the product with potable water to 4,0% (4 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.2.2. Use-specific risk mitigation measures See general directions for use.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
4.3. Use description Table 3.
Use # 2 – Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area).
Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Where relevant, an exact description of the - authorised use
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 35/53EN OJ L, 20.3.2026 Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data
Scientific name: Enveloped viruses only
Common name: Enveloped viruses only
Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area).
Application method(s) Method: manual application
Detailed description:
Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,38% w/w. This is a 4% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2). Dilute the product to 4% v/v (4 ml product, add water up to 100 ml).
Number and timing of application:
Contact time: 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide).
4.3.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product.
Dilute the product with potable water to 4,0% (4 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step.
Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required.Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.3.2. Use-specific risk mitigation measures See general directions for use.
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
36/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
4.4. Use description Table 4.
Use # 3 - Disinfection of clean hard non-porous surfaces and small objects in a veterinary area Product type PT03: Veterinary hygiene Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces and small objects in a veterinary area.
Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 6% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected for 5 minutes and apply approx. 19 sprays /m2or 25 ml/m2for 30 minutes). Dilute the product to 6% v/v (6 ml product, add water up to 100 ml).
Number and timing of application:
Contact time: 5 minutes at room temperature (18-25 °C); 30 minutes at 10 °C Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide).
4.4.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product.
Dilute the product with potable water to 6,0% (6 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 37/53EN OJ L, 20.3.2026 Leave wet for 5 minutes at room temperature or for 30 minutes at 10°C. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.4.2. Use-specific risk mitigation measures See general directions for use.
4.4.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.4.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.4.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
4.5. Use description Table 5.
Use # 4 – Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces (incl. machines and equipment) with dairy food contact (food, industrial, institutional area). For example, ice-cream and shake machines, open plant cleaning in food factories or hard surfaces in kitchens.
Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
Application rate(s) and frequency Application Rate: The product should be applied in active substance concentration 0,57% w/w. This is a 6% v/v dilution of the product.
Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected).
Dilute the product to 6% v/v (6 ml product, add water up to 100 ml).
Number and timing of application:
Contact time: 5 minutes Category(ies) of users professional 38/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026 Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20.0 litres Bottle J-flex/ Smartdose, HDPE: 1,4 and 1,5 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide).
4.5.1. Use-specific instructions for use Dilute the product with potable water to 6,0% (6 ml product, add water up to 100 ml). Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in freshly diluted product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.5.2. Use-specific risk mitigation measures See general directions for use.
4.5.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.5.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.5.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 3
5.1. Instructions for use Comply with the instructions for use.
Inform the authorisation holder if the treatment is ineffective.
5.2. Risk mitigation measures Wear protective chemical resistant gloves classified under EN 374 or equivalent, face protection consistent with EN 16321 or equivalent and a coverall consistent with EN 14605 or equivalent when handling the concentrate product (during dilution). The full texts of the EN standards are available in Section 6. Personal protective equipment (PPE) material to be specified by the authorisation holder within the product information. This is without prejudice to the application of Council Directive 98/24/EC and other Union legislation in the area of health and safety at work. See
section 6 for the full reference to this act.
Do not breathe vapour.
Avoid contact with eyes and skin.
Avoid splashes and spills during mixing and loading (dilution).
Wash hands after handling.
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 39/53EN OJ L, 20.3.2026
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptoms: Call 112 or an ambulance for medical assistance. If no symptoms: Call a Poison Centre or a doctor.
IF ON SKIN: Immediately wash with plenty of water. Thereafter take off all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTRE or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing for at least 15 minutes. Call 112 or an ambulance for medical assistance.
Information to Healthcare personnel/doctor: the eyes should also be rinsed repeatedly on the way to the doctor if eye exposure to alkaline chemicals (pH > 11), amines and acids like acetic acid, formic acid or propionic acid.
IF SWALLOWED: Immediately rinse mouth. Do NOT induce vomiting. Give something to drink, if exposed person is able to swallow. Call 112 or an ambulance for medical assistance.
5.4. Instructions for safe disposal of the product and its packaging Dispose of unused product, its packaging and all other waste in accordance with local regulations.
Do not discharge unused product on the ground, into water sources, into pipes nor down the drains.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Store in original container tightly closed. Store protected from light.
Do not store above 40 °C.
Shelf- life: 2 years.
6. OTHER INFORMATION The full titles of the EN standards referenced in section 5.2 “Risk mitigation measures” are:
EN 374 - Protective gloves against dangerous chemicals and micro-organisms EN 16321 - Eye and face protection for occupational use EN 14605 - Protective clothing against liquid chemicals - Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]).
Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work (fourteenth individual Directive within the meaning of Article 16(1) of Directive 89/391/EEC) (OJ L 131, 5.5.1998, p. 11).
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 3
7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ANDY Market area: EU MultiPower Plus Professional
ANDYSAN Market area: EU MultiPower Plus Professional 40/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
CIF MultiPower Market area: EU Plus Professional
DOMESTOS Market area: EU MultiPower Plus Professional
FLORASZEPT Market area: EU MultiPower Plus Professional
GLORIX Market area: EU MultiPower Plus Professional
JIF MultiPower Market area: EU Plus Professional
KLINEX Market area: EU MultiPower Plus Professional
LIFEBUOY Market area: EU MultiPower Plus Professional
LYSOFORM Market area: EU MultiPower Plus Professional Room Care R9.1 Market area: EU Des-Plus
SAVO Market area: EU MultiPower Plus Professional
SUPERANDY Market area: EU MultiPower Plus Professional
VISS MultiPower Market area: EU Plus Professional Authorisation number EU-0031644-0007 1-3 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 8,8 % (w/w) substance Methanesulfonic Non-active 75-75-2 200-898-6 2,56 % (w/w) acid substance Alkyl ether Non-active 53563-70-5 4,5 % (w/w) carboxylic acid substance
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 41/53EN OJ L, 20.3.2026
7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Room Care R9 Market area: EU Des-Plus Authorisation number EU-0031644-0008 1-3 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 8,8 % (w/w) substance Methanesulfonic Non-active 75-75-2 200-898-6 2,56 % (w/w) acid substance Alkyl ether Non-active 53563-70-5 4,5 % (w/w) carboxylic acid substance
1. META SPC 4 ADMINISTRATIVE INFORMATION
1.1. Meta SPC 4 identifier
Identifier Meta SPC: Meta SPC 4
1.2. Suffix to the authorisation number Number 1-4
1.3. Product type(s) Product type(s) PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area
2. META SPC 4 COMPOSITION
2.1. Qualitative and quantitative information on the composition of the meta SPC 4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 0,352 - 0,352 % substance (w/w)
2.2. Type(s) of formulation of the meta SPC 4 Formulation type(s) AL Any other liquid 42/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
3. HAZARD AND PRECAUTIONARY STATEMENTS OF THE META SPC 4 Hazard statements Precautionary statements
4. AUTHORISED USE(S) OF THE META SPC
4.1. Use description Table 1.
Use # 1a - Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport).
Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: enveloped viruses
Common name: enveloped viruses
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects without food contact (e.g. industrial, institutional area (excluding healthcare area) and the use in vehicles for human transport).
Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
Application rate(s) and frequency Application Rate: Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected). ready to use products
Number and timing of application:
Contact time:
Bacteria – 5 minutes Yeasts - 15 minutes Enveloped viruses - 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Spray bottles, HDPE: 0,75 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide)
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 43/53EN OJ L, 20.3.2026
4.1.1. Use-specific instructions for use Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in the product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 5 minutes against bacteria and enveloped viruses and 15 minutes against yeasts. Wipe dry or let air dry.
No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.1.2. Use-specific risk mitigation measures See general directions for use.
4.1.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.1.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.1.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
4.2. Use description Table 2.
Use # 1b – Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport) Product type PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Enveloped viruses only
Common name: Enveloped viruses only
Development stage: no data
Scientific name: Yeast
Common name: Yeast
Development stage: no data Field(s) of use indoor use Disinfection of hard non-porous surfaces and small objects with food contact (food, industrial, institutional area and the use in vehicles for human transport).
Application method(s) Method: manual application
Detailed description:
1. Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
2. Dipping to wet small objects.
44/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026 Application rate(s) and frequency Application Rate: Apply the product by fully wetting the surface (apply approx. 10 sprays /m2or 13 ml/m2or fully cover the object to be disinfected). Ready to use products
Number and timing of application:
Contact time: 15 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Spray bottles, HDPE: 0,75 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide).
4.2.1. Use-specific instructions for use Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step. In case of small objects, dip the objects completely in the product to wet the surface. The solution for dipping shall be used only once.
Leave wet for 15 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.2.2. Use-specific risk mitigation measures See general directions for use.
4.2.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.2.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.2.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
4.3. Use description Table 3.
Use # 2 – Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area).
Product type PT02: Disinfectants and algaecides not intended for direct application to humans or animals PT04: Food and feed area Where relevant, an exact description of the - authorised use Target organism(s) (including development Scientific name: Bacteria stage) Common name: Bacteria
Development stage: no data
Scientific name: Yeast
Common name: Yeast
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 45/53EN OJ L, 20.3.2026
Development stage: no data
Scientific name: Enveloped viruses only
Common name: Enveloped viruses only
Development stage: no data Field(s) of use indoor use Disinfection of clean hard non-porous surfaces without and with food contact (food, industrial, institutional area including healthcare area).
Application method(s) Method: manual application
Detailed description:
Surface disinfection by pouring or foam spraying. Cloth, brush, sponge, mop or wipe should be used to distribute on surface.
Application rate(s) and frequency Application Rate: Apply the product by fully wetting all surface (apply approx. 10 sprays /m2or 13 ml/m2). Ready to use product
Number and timing of application:
Contact time: 5 minutes Category(ies) of users professional Pack sizes and packaging material Soft Pouch, PET/PE and LLDPE/PA: 0,1; 0,8; 1,0; 1,5; 2,0; 2,5 and 5,0 litres Bottle, HDPE: 1,0; 2,0; 2,5 and 3,0 litres Canister, HDPE: 2,0; 2,5; 3,0; 5,0; 10,0 and 20,0 litres Spray bottles, HDPE: 0,75 litres (PET – polyethylene terephthalate; PE – Polyethylene; HDPE – High density polyethylene; LLDPE - Linear low density polyethylene, PA - polyamide).
4.3.1. Use-specific instructions for use Remove gross soiling and pre-clean the surface before applying the product.
Apply, e.g. spray, pour product onto the surface and then use a cloth, brush, sponge, mop or wipe for product distribution. Ensure that the surface is completely wet after the treatment step.
Leave wet for 5 minutes. Wipe dry or let air dry. No rinsing of surface required. Disinfect surfaces and objects as frequently as required by the hygiene protocol in place.
4.3.2. Use-specific risk mitigation measures See general directions for use.
4.3.3. Where specific to the use, the particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment See general directions for use.
4.3.4. Where specific to the use, the instructions for safe disposal of the product and its packaging See general directions for use.
4.3.5. Where specific to the use, the conditions of storage and shelf-life of the product under normal conditions of storage See general directions for use.
5. GENERAL DIRECTIONS FOR USE OF THE META SPC 4
5.1. Instructions for use Comply with the instructions for use.
Inform the authorisation holder if the treatment is ineffective.
46/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
5.2. Risk mitigation measures Not relevant.
5.3. Particulars of likely direct or indirect effects, first aid instructions and emergency measures to protect the environment If medical advice is needed, have product container or label at hand
IF IN EYES: If symptoms occur rinse with water. Remove contact lenses, if present and easy to do. Call a POISON CENTRE or a doctor.
IF ON SKIN: Wash skin with water. If symptoms occur call a POISON CENTRE or a doctor.
IF SWALLOWED: If symptoms occur call a POISON CENTRE or a doctor.
IF INHALED: If symptoms occur call a POISON CENTRE or a doctor.
5.4. Instructions for safe disposal of the product and its packaging Dispose of unused product, its packaging and all other waste in accordance with local regulations.
Do not discharge unused product on the ground, into water sources, into pipes nor down the drains.
5.5. Conditions of storage and shelf-life of the product under normal conditions of storage Store in original container tightly closed. Store protected from light.
Do not store above 40 °C.
Shelf- life: 2 years.
6. OTHER INFORMATION
7. THIRD INFORMATION LEVEL: INDIVIDUAL PRODUCTS IN THE META SPC 4
7.1. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Room Care R9 Market area: EU RTU Room Care R9.1 Market area: EU Des Authorisation number EU-0031644-0009 1-4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 0,352 % (w/w) substance
7.2. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Taski Sani 4 in 1 Market area: EU Plus Spray Authorisation number EU-0031644-0010 1-4
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 47/53EN OJ L, 20.3.2026 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 0,352 % (w/w) substance
7.3. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ANDY Market area: EU MultiPower Professional
ANDYSAN Market area: EU MultiPower Professional
CIF MultiPower Market area: EU Professional Cif 4in1 Cleaner Market area: EU Disinfectant
DOMESTOS Market area: EU MultiPower Professional Domestos 4in1 Market area: EU Cleaner Disinfectant
FLORASZEPT Market area: EU MultiPower Professional
GLORIX Market area: EU MultiPower Professional Glorix 4in1 Market area: EU Cleaner Disinfectant
JIF MultiPower Market area: EU Professional
KLINEX Market area: EU MultiPower Professional Klinex 4in1 Market area: EU Cleaner Disinfectant
LIFEBUOY Market area: EU MultiPower Professional 48/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
LYSOFORM Market area: EU MultiPower Professional Lysoform 4in1 Market area: EU Cleaner Disinfectant Metro Prof. 4 in 1 Market area: EU Plus RTU OPTIMAX 4 in 1 Market area: EU Plus RTU
SAVO Market area: EU MultiPower Professional Suma San 4in1 Market area: EU D10.7 Spray
SUPERANDY Market area: EU MultiPower Professional Taski Sani 4 in 1 Market area: EU Plus RTU
VISS MultiPower Market area: EU Professional Viss 4in1 Cleaner Market area: EU Disinfectant We Clean 4 in 1 Market area: EU Plus RTU Authorisation number EU-0031644-0011 1-4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 0,352 % (w/w) substance
7.4. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) ANDY Market area: EU MultiPower FREE Professional
ANDY Market area: EU MultiPower ZERO Professional
ANDYSAN Market area: EU MultiPower FREE Professional
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 49/53EN OJ L, 20.3.2026
ANDYSAN Market area: EU MultiPower ZERO Professional
CIF MultiPower Market area: EU FREE Professional
CIF MultiPower Market area: EU ZERO Professional
Divosan Freed Market area: EU RTU
DOMESTOS Market area: EU MultiPower FREE Professional
DOMESTOS Market area: EU MultiPower ZERO Professional
FLORASZEPT Market area: EU MultiPower FREE Professional
FLORASZEPT Market area: EU MultiPower ZERO Professional
GLORIX Market area: EU MultiPower FREE Professional
GLORIX Market area: EU MultiPower ZERO Professional
JIF MultiPower Market area: EU FREE Professional
JIF MultiPower Market area: EU ZERO Professional
KLINEX Market area: EU MultiPower FREE Professional
KLINEX Market area: EU MultiPower ZERO Professional
LIFEBUOY Market area: EU MultiPower FREE Professional 50/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
LIFEBUOY Market area: EU MultiPower ZERO Professional
LYSOFORM Market area: EU MultiPower FREE Professional
LYSOFORM Market area: EU MultiPower ZERO Professional
SAVO Market area: EU MultiPower FREE Professional
SAVO Market area: EU MultiPower ZERO Professional
SUPERANDY Market area: EU MultiPower FREE Professional
SUPERANDY Market area: EU MultiPower ZERO Professional
Sure Sanitizer Market area: EU A-RTU
Sure Sanitizer Market area: EU Spray TASKI Sani 4 in 1 Market area: EU FREE TASKI Sani 4 in 1 Market area: EU ZERO
VISS MultiPower Market area: EU FREE Professional
VISS MultiPower Market area: EU ZERO Professional Authorisation number EU-0031644-0012 1-4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 0,352 % (w/w) substance
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 51/53EN OJ L, 20.3.2026
7.5. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Sure Sanitizer Market area: EU B-RTU Authorisation number EU-0031644-0013 1-4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 0,352 % (w/w) substance
7.6. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Sure Sanitizer Market area: EU C-RTU
Sure Sanitizer Market area: EU 4in1 Spray
Sure Sanitizer Market area: EU 4in1 Fresh Spray Authorisation number EU-0031644-0014 1-4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 0,352 % (w/w) substance
7.7. Trade name(s), authorisation number and specific composition of each individual product Trade name(s) Sure Freshener Market area: EU RTU
Sure Freshener Market area: EU 7X RTU
Sure Sanitiser Market area: EU RTU Sure Sanitiser 2X Market area: EU RTU TASKI Sani 4 in 1 Market area: EU Freshener Taski Sani 4 in 1 Market area: EU Freshener
Zenith Freshener Market area: EU RTU 52/53 ELI: http://data.europa.eu/eli/reg_impl/2026/700/ojEN OJ L, 20.3.2026
Zenith Freshener Market area: EU 7X RTU
Zenith Sanitiser Market area: EU RTU
Zenith Sanitiser Market area: EU 2X RTU Authorisation number EU-0031644-0015 1-4 Common name IUPAC name Function CAS number EC number Content (%) L-(+)-lactic acid Active 79-33-4 201-196-2 0,352 % (w/w) substance
ELI: http://data.europa.eu/eli/reg_impl/2026/700/oj 53/53