Council Regulation (EU) 2022/972 of 17 June 2022 amending Regulation (EU) 2021/2283 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products

L 167/10 EN Official Journal of the European Union 24.6.2022 REGULATIONS COUNCIL REGULATION (EU) 2022/972 of 17 June 2022 amending Regulation (EU) 2021/2283 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof, Having regard to the proposal from the European Commission, Whereas: (1) In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are produced in insufficient quantities in the Union and thereby avoid any disturbances on the market for those products, autonomous tariff quotas of the Union (‘quotas’) were opened by Council Regulation (EU) 2021/2283(1). Within those quotas, products can be imported into the Union at reduced or zero duty rates. (2) As it is in the Union's interest to ensure an adequate supply of certain industrial products, and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to open new quotas with order numbers 09.2819, 09.2839, 09.2855, 09.2857 and 09.2702 at zero duty rates for appropriate quantities of those products. (3) As the scope of the quotas with order numbers 09.2583 and 09.2876 has become inadequate to fulfil the needs of the economic operators in the Union, the description of the products covered by those quotas should be amended. The indication of the applicable TARIC code for those products should therefore be amended. (4) As it is no longer in the Union's interest to maintain the quotas with order numbers 09.2637, 09.2679 and 09.2740, those quotas should be closed with effect from 1 July 2022. (5) Taking into account the amendments to be made and for the sake of clarity, the Annex to Regulation (EU) 2021/2283 should be replaced. (6) In order to avoid any interruption in the application of the quota scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the quotas for the products concerned should apply from 1 July 2022. This Regulation should therefore enter into force as a matter of urgency, HAS ADOPTED THIS REGULATION: Article 1 The Annex to Regulation (EU) 2021/2283 is replaced by the text set out in the Annex to this Regulation. (1) Council Regulation (EU) 2021/2283 of 20 December 2021 opening and providing for the management of autonomous tariff quotas of the Union for certain agricultural and industrial products, and repealing Regulation (EU) No 1388/2013 (OJ L 458, 22.12.2021, p. 33).24.6.2022 EN Official Journal of the European Union L 167/11 Article 2 This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 July 2022. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 17 June 2022. For the Council The President B. LE MAIREL 167/12 EN Official Journal of the European Union 24.6.2022 ANNEX ‘ANNEX Order Quota Quota CN code TARIC Description Quota period number volume duty rate 09.2849 ex 0710 80 69 10 Mushrooms of the species 1.1.-31.12. 700tonnes 0% Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals(1)(2) 09.2664 ex 2008 60 39 30 Sweet cherries containing added 1.1.-31.12. 1 000 10% spirit, with a sugar content of not tonnes more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate products(1) 09.2913 ex 2401 10 35 91 Natural unmanufactured tobacco, 1.1.-31.12. 6 000 0% ex 2401 10 70 10 whether or not cut in regular size, tonnes ex 2401 10 95 11 having a custom value of not less ex 2401 10 95 21 than EUR 450 per 100 kg net ex 2401 10 95 91 weight, for use as binder or ex 2401 20 35 91 wrapper for the manufacture of ex 2401 20 70 10 goods falling within subheading ex 2401 20 95 11 2402 10 00(1) ex 2401 20 95 21 ex 2401 20 95 91 09.2828 2712 20 90 Paraffin wax containing by weight 1.1.-31.12. 100 000 0% less than 0,75 % of oil tonnes 09.2600 ex 2712 90 39 10 Slack wax (CAS RN 64742-61-6) 1.1.-31.12. 100 000 0% tonnes 09.2578 ex 2811 19 80 50 Sulphamidic acid (CAS RN 1.1.-31.12. 27 000 0% 5329-14-6) with a purity by tonnes weight of 95 % or more, whether or not with not more than 5 % addition of the anti-caking agent silicon dioxide (CAS RN 112926-00-8) 09.2928 ex 2811 22 00 40 Silica filler in the form of granules, 1.1.-31.12. 1 700 0% with a purity by weight of 97 % or tonnes more of silicon dioxide 09.2806 ex 2825 90 40 30 Tungsten trioxide, including blue 1.1.-31.12. 12 000 0% tungsten oxide (CAS RN tonnes 1314-35-8 or CAS RN 39318-18-8) 09.2819 ex 2833 25 00 30 Copper hydroxide sulfate (Cu4 1.7.-31.12. 120 000 0% (OH)6(SO4)), hydrate kilograms (CAS RN 12527-76-3) with a purity by weight of 98 % or more24.6.2022 EN Official Journal of the European Union L 167/13 09.2872 ex 2833 29 80 40 Caesium sulphate (CAS RN 1.1.-31.12. 400tonnes 0% 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of caesium sulphate 09.2567 ex 2903 22 00 10 Trichloroethylene (CAS RN 1.1.-31.12. 11 885 000 0% 79-01-6) with a purity by weight kilograms of 99 % or more 09.2837 ex 2903 79 30 20 Bromochloromethane (CAS RN 1.1.-31.12. 600tonnes 0% 74-97-5) 09.2933 ex 2903 99 80 30 1,3-Dichlorobenzene (CAS RN 1.1.-31.12. 2 600 0% 541-73-1) tonnes 09.2700 ex 2905 12 00 10 Propan-1-ol (propyl alcohol) 1.1.-31.12. 15 000 0% (CAS RN 71-23-8) tonnes 09.2830 ex 2906 19 00 40 Cyclopropylmethanol 1.1.-31.12. 20tonnes 0% (CAS RN 2516-33-8) 09.2851 ex 2907 12 00 10 O-cresol (CAS RN 95-48-7) 1.1.-31.12. 20 000 0% having a purity of not less than tonnes 98,5 % by weight 09.2704 ex 2909 49 80 20 2,2,2',2'-Tetrakis 1.1.-31.12. 500tonnes 0% (hydroxymethyl)-3,3'- oxydipropan-1-ol (CAS RN 126-58-9) 09.2565 ex 2914 19 90 70 Calcium acetylacetonate (CAS RN 1.1.-31.12. 400tonnes 0% 19372-44-2) with a purity by weight of 95 % or more 09.2852 ex 2914 29 00 60 Cyclopropyl methyl ketone 1.1.-31.12. 300tonnes 0% (CAS RN 765-43-5) 09.2638 ex 2915 21 00 10 Acetic acid (CAS RN 64-19-7) of a 1.1.-31.12. 1 000 000 0% purity by weight of 99 % or more tonnes 09.2702 2915 32 00 Vinyl acetate (CAS RN 108-05-4) 1.7.-31.12. 225 000 0% tonnes 09.2728 ex 2915 90 70 85 Ethyl trifluoroacetate 1.1.-31.12. 400tonnes 0% (CAS RN 383-63-1) 09.2665 ex 2916 19 95 30 Potassium (E,E)- 1.1.-31.12. 8 250 0% hexa-2,4-dienoate (CAS RN tonnes 24634-61-5) 09.2684 ex 2916 39 90 28 2,5-Dimethylphenylacetyl 1.1.-31.12. 700tonnes 0% chloride (CAS RN 55312-97-5) 09.2599 ex 2917 11 00 40 Diethyl oxalate (CAS RN 95-92-1) 1.1.-31.12. 500tonnes 0% 09.2769 ex 2917 13 90 10 Dimethyl sebacate (CAS RN 1.1.-31.12. 1 000 0% 106-79-6) tonnes 09.2634 ex 2917 19 80 40 Dodecanedioic acid (CAS 1.1.-31.12. 8 000 0% RN 693-23-2), of a purity by tonnes weight of more than 98,5 %L 167/14 EN Official Journal of the European Union 24.6.2022 09.2808 ex 2918 22 00 10 O-acetylsalicylic acid (CAS RN 1.1.-31.12. 120tonnes 0% 50-78-2) 09.2646 ex 2918 29 00 75 Octadecyl 3-(3,5-di-tert-butyl- 1.1.-31.12. 380tonnes 0% 4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with: — a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and — a melting point of 49 °C or more, but not more than 54 °C, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates)(1) 09.2647 ex 2918 29 00 80 Pentaerythritol tetrakis(3-(3,5-di- 1.1.-31.12. 140tonnes 0% tert-butyl-4-hydroxyphenyl) propionate) (CAS RN 6683-19-8) with: — a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and — a melting point of 110 °C or more, but not more than 125 °C, for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates)(1) 09.2975 ex 2918 30 00 10 Benzophenone-3,3’,4,4’- 1.1.-31.12. 1 000 0% tetracarboxylic dianhydride (CAS tonnes RN 2421-28-5) 09.2688 ex 2920 29 00 70 Tris (2,4-di-tert-butylphenyl) 1.1.-31.12. 6 000 0% phosphite (CAS RN 31570-04-4) tonnes 09.2598 ex 2921 19 99 75 Octadecylamine (CAS RN 1.1.-31.12. 400tonnes 0% 124-30-1) 09.2649 ex 2921 29 00 60 Bis(2-dimethylaminoethyl) 1.1.-31.12. 1 700 0% (methyl)amine (CAS RN tonnes 3030-47-5) 09.2682 ex 2921 41 00 10 Aniline (CAS RN 62-53-3) with a 1.1.-31.12. 150 000 0% purity by weight of 99 % or more tonnes 09.2617 ex 2921 42 00 89 4-Fluoro-N-(1-methylethyl) 1.1.-31.12. 500tonnes 0% benzeneamine (CAS RN 70441-63-3)24.6.2022 EN Official Journal of the European Union L 167/15 09.2602 ex 2921 51 19 10 O-phenylenediamine (CAS RN 1.1.-31.12. 1 800 0% 95-54-5) tonnes 09.2563 ex 2922 41 00 20 L-Lysine hydrochloride (CAS RN 1.7.-31.12. 122 500 0% 657-27-2) or an aqueous solution tonnes of L-lysine (CAS RN 56-87-1), containing by weight 50 % or more of L-lysine 09.2592 ex 2922 50 00 25 L-Threonine (CAS RN 72-19-5) 1.1.-31.12. 166 000 0% tonnes 09.2575 ex 2923 90 00 87 3-Chloro-2-hydroxypropyl) 1.1.-31.12. 19 000 0% trimethylammonium chloride tonnes (CAS RN 3327-22-8), in the form of an aqueous solution containing by weight 65 % or more but not more than 71 % 3-chloro- 2-hydroxypropyl) trimethylammonium chloride 09.2854 ex 2924 19 00 85 3-Iodoprop-2-yn-1-yl 1.1.-31.12. 400tonnes 0% butylcarbamate (CAS RN 55406-53-6) 09.2874 ex 2924 29 70 87 Paracetamol (INN) (CAS RN 1.1.-31.12. 20 000 0% 103-90-2) tonnes 09.2742 ex 2926 10 00 10 Acrylonitrile (CAS RN 107-13-1), 1.1.-31.12. 60 000 0% for use in the manufacture of tonnes goods of chapter 55 and heading 6815(1) 09.2583 ex 2926 10 00 30 Acrylonitrile (CAS RN 107-13-1), 1.7.-31.12. 20 000 0% for use in the manufacture of tonnes goods of headings 2921, 2924, 3903, 3906, 3908, 3911and 4002(1) 09.2856 ex 2926 90 70 84 2-Nitro-4(trifluoromethyl) 1.1.-31.12. 900tonnes 0% benzonitrile (CAS RN 778-94-9) 09.2708 ex 2928 00 90 15 Monomethylhydrazine (CAS 1.1.-31.12. 900tonnes 0% RN 60-34-4) in the form of an aqueous solution with a content by weight of monomethylhydrazine of 40 (± 5) % 09.2581 ex 2929 10 00 25 1,5-Naphthylene diisocyanate 1.1.-31.12. 300tonnes 0% (CAS RN 3173-72-6) with a purity by weight of 90 % or more 09.2685 ex 2929 90 00 30 Nitroguanidine (CAS RN 1.1.-31.12. 6 500 0% 556-88-7) tonnesL 167/16 EN Official Journal of the European Union 24.6.2022 09.2597 ex 2930 90 98 94 Bis[3-(triethoxysilyl)propyl] 1.1.-31.12. 6 000 0% disulphide (CAS RN 56706-10-6) tonnes 09.2596 ex 2930 90 98 96 2-Chloro-4-(methylsulphonyl)- 1.1.-31.12. 300tonnes 0% 3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8) 09.2580 ex 2931 90 00 75 Hexadecyltrimethoxysilane (CAS 1.1.-31.12. 165tonnes 0% RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylene(1) 09.2842 2932 12 00 2-Furaldehyde (furfuraldehyde) 1.1.-31.12. 10 000 0% tonnes 09.2696 ex 2932 20 90 25 Decan-5-olide 1.1.-31.12. 6 000 0% (CAS RN 705-86-2) kilograms 09.2697 ex 2932 20 90 30 Dodecan-5-olide 1.1.-31.12. 6 000 0% (CAS RN 713-95-1) kilograms 09.2812 ex 2932 20 90 77 Hexan-6-olide (CAS RN 1.1.-31.12. 4 000 0% 502-44-3) tonnes 09.2858 2932 93 00 Piperonal (CAS RN 120-57-0) 1.1.-31.12. 220tonnes 0% 09.2839 ex 2933 39 99 09 2-(2-Pyridyl)ethanol 1.7.-31.12. 350tonnes 0% (CAS RN 103-74-2) with a purity by weight of 99 % or more 09.2673 ex 2933 39 99 43 2,2,6,6-Tetramethylpiperidin- 1.1.-31.12. 1 000 0% 4-ol CAS RN 2403-88-5) tonnes 09.2880 ex 2933 59 95 39 Ibrutinib (INN) (CAS RN 1.1.-31.12. 5tonnes 0% 936563-96-1) 09.2860 ex 2933 69 80 30 1,3,5-Tris[3-(dimethylamino) 1.1.-31.12. 600tonnes 0% propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5) 09.2566 ex 2933 99 80 05 1,4,7,10-Tetraazacyclododecane 1.1.-31.12. 60tonnes 0% (CAS RN 294-90-6) with a purity by weight of 96 % or more 09.2658 ex 2933 99 80 73 5-(Acetoacetylamino) 1.1.-31.12. 400tonnes 0% benzimidazolone (CAS RN 26576-46-5) 09.2593 ex 2934 99 90 67 5-Chlorothiophene-2-carboxylic 1.1.-31.12. 45 000 0% acid (CAS RN 24065-33-6) kilograms 09.2675 ex 2935 90 90 79 4-[[(2-Methoxybenzoyl)amino] 1.1.-31.12. 1 000 0% sulfonyl]benzoyl chloride (CAS tonnes RN 816431-72-8)24.6.2022 EN Official Journal of the European Union L 167/17 09.2710 ex 2935 90 90 91 2,4,4-Trimethylpentan- 1.1.-31.12. 5 000 0% 2-aminium (3R,5S,6E)- kilograms 7-{2-[(ethylsulfonyl)amino]- 4-(4-fluorophenyl)-6-(propan- 2-yl)pyrimidin- 5-yl}-3,5-dihydroxyhept-6- enoate (CAS RN 917805-85-7) 09.2945 ex 2940 00 00 20 D-Xylose (CAS RN 58-86-6) 1.1.-31.12. 400tonnes 0% 09.2686 ex 3204 11 00 75 Colourant C.I. Disperse Yellow 54 1.1.-31.12. 250tonnes 0% (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight 09.2676 ex 3204 17 00 14 Preparations based on Colourant 1.1.-31.12. 50tonnes 0% C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more but less than 85 % by weight 09.2698 ex 3204 17 00 30 Colourant C.I. Pigment Red 4 1.1.-31.12. 150tonnes 0% (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of 60 % or more by weight 09.2659 ex 3802 90 00 19 Soda flux calcinated 1.1.-31.12. 35 000 0% diatomaceous earth tonnes 09.2908 ex 3804 00 00 10 Sodium lignosulphonate (CAS RN 1.1.-31.12. 40 000 0% 8061-51-6) tonnes 09.2889 3805 10 90 Sulphate turpentine 1.1.-31.12. 25 000 0% tonnes 09.2935 ex 3806 10 00 10 Rosin and resin acids obtained 1.1.-31.12. 280 000 0% from fresh oleoresins tonnes 09.2832 ex 3808 92 90 40 Preparation containing 38 % or 1.1.-31.12. 500tonnes 0% more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion 09.2876 ex 3811 29 00 57 Additives consisting of reaction 1.1.-31.12. 900tonnes 0% products of diphenylamine and branched nonenes with: — more than 20 % but not more than 50 % by weight 4-mono­ nonyldiphenylamine, and — more than 50 % but not more than 80 % by weight 4,4'- dinonyldiphenylamine,L 167/18 EN Official Journal of the European Union 24.6.2022 — a total percentage of 2,4-dino­ nyldiphenylamine and 2,4'- dinonyldiphenylamine of not more than 15 % by weight, used for the manufacture of lubricating oils(1) 09.2814 ex 3815 90 90 76 Catalyst consisting of titanium 1.1.-31.12. 3 000 0% dioxide and tungsten trioxide tonnes 09.2644 ex 3824 99 92 77 Preparation containing by weight: 1.1.-31.12. 10 000 0% — 55 % or more but not more tonnes than 78 % of dimethyl glute­ rate (CAS RN 1119-40-0), — 10 % or more but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), and — not more than 35 % of dimethyl succinate (CAS RN 106-65-0) 09.2681 ex 3824 99 92 85 Mixture of bis [3-(triethoxysilyl) 1.1.-31.12. 9 000 0% propyl]sulphides (CAS RN tonnes 211519-85-6) 09.2650 ex 3824 99 92 87 Acetophenone (CAS RN 1.1.-31.12. 2 000 0% 98-86-2), with a purity by weight tonnes of 60 % or more but not more than 90 % 09.2829 ex 3824 99 93 43 Solid extract of the residual, 1.1.-31.12. 1 600 0% insoluble in aliphatic solvents, tonnes obtained during the extraction of rosin from wood, having the following characteristics: — a resin acid content not exceeding 30 % by weight, — an acid number not exceeding 110, and — a melting point of 100° C or more 09.2907 ex 3824 99 93 67 Mixture of phytosterols, in the 1.1.-31.12. 2 500 0% form of powder, containing by tonnes weight: — 75 % or more of sterols, — not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters(1)24.6.2022 EN Official Journal of the European Union L 167/19 09.2568 ex 3824 99 96 91 Mixture, in pellet form, containing 1.1.-31.12. 1 500 0% by weight: tonnes — 49 % or more but not more than 50 % of bis[3-(triethoxy­ silyl)propyl] polysulphides (CAS RN 211519-85-6), and — 50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4), of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the ASTM D1511 method) 09.2820 ex 3827 90 00 10 Mixtures containing by weight: 1.1.-31.12. 6 000 0% — 60 % or more but not more tonnes than 90 % of 2-chloropropene (CAS RN 557-98-2), — 8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8), — 5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6), — not more than 6 % of 3-chlor­ opropene (CAS RN 107-05-1), and — not more than 1 % of ethyl chloride (CAS RN 75-00-3) 09.2671 ex 3905 99 90 81 Poly(vinyl butyral)(CAS RN 1.1.-31.12. 12 500 0% 63148-65-2): tonnes — containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and — with a median particle size (D50) of more than 0,6 mm 09.2846 ex 3907 40 00 25 Polymer blend of polycarbonate 1.1.-31.12. 2 000 0% and poly(methyl methacrylate) tonnes with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)L 167/20 EN Official Journal of the European Union 24.6.2022 09.2585 ex 3907 99 80 70 Copolymer of poly(ethylene 1.1.-31.12. 60 000 2% terephthalate) and cyclohexane tonnes dimethanol, containing more than 10 % by weight of cyclohexane dimethanol 09.2855 ex 3910 00 00 10 Liquid poly 1.7.-31.12. 250tonnes 0% (methylhydrosiloxane) with terminal trimethylsilyl groups (CAS RN 63148-57-2) with a purity by weight of 99,9 % or more 09.2723 ex 3911 90 19 10 Poly 1.1.-31.12. 5 000 0% (oxy-1,4-phenylenesulpho- tonnes nyl-1,4-phenyleneoxy-4,4’- biphenylene) 09.2816 ex 3912 11 00 20 Cellulose acetate flakes 1.1.-31.12. 75 000 0% tonnes 09.2573 ex 3913 10 00 20 Sodium alginate extracted from 1.1.-31.12. 2 000 0% brown tonnes seaweed (CAS RN 9005-38-3), with — a loss on drying of not more than 15 % by weight (4 h at 105 °C), — a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight 09.2641 ex 3913 90 00 87 Sodium hyaluronate, non sterile, 1.1.-31.12. 300kilo- 0% with: grams — a weight average molecular weight (M ) of not more w than 900 000, — an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg, — an ethanol content of not more than 1 % by weight, — an isopropanol content of not more than 0,5 % by weight 09.2661 ex 3920 51 00 50 Sheets of polymethylmethacrylate 1.1.-31.12. 100tonnes 0% conforming to standards: — EN 4364 (MIL-P-5425E) and DTD5592A, or — EN 4365 (MIL-P-8184) and DTD5592A24.6.2022 EN Official Journal of the European Union L 167/21 09.2645 ex 3921 14 00 20 Cellular block of regenerated 1.1.-31.12. 1 700 0% cellulose, impregnated with water tonnes containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 c- m) × 40 cm (± 5 cm) 09.2572 ex 5205 26 00 10 Raw white single cotton yarn 1.1.-31.12. 50 000 0% ex 5205 27 00 10 — of combed fibres, tonnes — with an average fibre length of 36,5 mm or more, — produced through the com­ pact ring spinning process with pneumatic compression, — with a tear strength of 26,5 cN/tex or more (accord­ ing to ISO 2062:2009, at a speed of 5 000mm/min) 09.2576 ex 5208 12 16 20 Unbleached woven fabric in plain 1.1.-31.12. 1 500 000 0% weave, with: square — a width of not more than metres 145 cm, — a weight of 120 g/m2 or more, but not more than 130 g/m2, — 30 or more, but not more than 45 wefts per cm, — a tuck-in selvedge on both sides, where from the inside out, the 15 mm (± 2 mm) wide tuck-in selvedge consists of a 6 mm or more but not more than 9 mm wide strip of plain weave and a 6 mm or more but not more than 9 mm wide strip of panama weave 09.2577 ex 5208 12 96 20 Unbleached woven fabric in plain 1.1.-31.12. 2 300 000 0% weave, with: square — a width of not more than metres 145 cm, — a weight of more than 130 g/m2, but not more than 145 g/m2 — 30 or more, but not more than 45 wefts per cm, — a tuck-in selvedge on both sides, where from the inside out, the 15 mm (± 2 mm wide) tuck-in selvedge consists of a 6 mm or more but not more than 9 mm wide strip of plain weave andL 167/22 EN Official Journal of the European Union 24.6.2022 a 6 mm or more but not more than 9 mm wide strip of panama weave 09.2848 ex 5505 10 10 10 Waste of synthetic fibres 1.1.-31.12. 10 000 0% (including noils, yarn waste, and tonnes garnetted stock) of nylon or other polyamides (PA6 and PA66) 09.2721 ex 5906 99 90 20 Woven and laminated rubberised 1.1.-31.12. 375 000 0% textile fabric with the following square characteristics: metres — with three layers, — one outer layer consists of acrylic fabric, — the other outer layer consists of polyester fabric, — the middle layer consists of chlorobutyl rubber, — the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2, — the textile fabric has a total weight of 952 g/m2 or more but not more than 1 159g/m2, and — the textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm, used for the manufacture of the retractable roof of motor vehicles(1) 09.2866 ex 7019 12 00 06 S glass stratifils (rovings): 1.1.-31.12. 1 000 0% ex 7019 12 00 26 — composed of continuous glass tonnes filaments of 9 μm (± 0,5 μm), — measuring 200 tex or more but not more than 680 tex, — not containing any calcium oxide, and — with a breaking strength of more than 3 550 MPa determined by ASTM D2343-09, for use in the manufacture of aeronautics(1)24.6.2022 EN Official Journal of the European Union L 167/23 09.2628 ex 7019 66 00 10 Glass web woven from glass fibre 1.1.-31.12. 3 000 000 0% coated in plastic, of a weight of square 120 g/m2(± 10 g/m2), of a type meters used in rolling insect screens with fixed frames 09.2799 ex 7202 49 90 10 Ferro-chromium containing 1,5 % 1.1.-31.12. 50 000 0% or more but not more than 4 % by tonnes weight of carbon and not more than 70 % of chromium 09.2652 ex 7409 11 00 30 Refined copper foil and strips, 1.1.-31.12. 1 020 0% ex 7410 11 00 40 electrolytically manufactured, tonnes with a thickness of 0,015 mm or more 09.2734 ex 7409 19 00 20 Plates or sheets consisting of: 1.1.-31.12. 7 000 000 0% — a layer of a silicon nitride cera­ pieces mic with a thickness of 0,32 mm (± 0,1 mm) or more but not more than 1,0 mm (± 0,1 mm), — covered on both sides with a foil of refined copper with a thickness of 0,8 mm (± 0,1 mm), and — on one side partially covered with a coating of silver 09.2662 ex 7410 21 00 55 Plates: 1.1.-31.12. 80 000 0% — consisting of at least one layer square of fibreglass fabric impreg­ metres nated with epoxide resin, — covered on one or both sides with copper foil with a thick­ ness of not more than 0,15 mm, — with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC- TM-650 2.5.5.2, — with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, — with a comparative tracking index (CTI) of 600 or more 09.2835 ex 7604 29 10 30 Aluminium alloy rods with a 1.1.-31.12. 1 000 0% diameter of 300,1 mm or more, tonnes but not more than 533,4 mmL 167/24 EN Official Journal of the European Union 24.6.2022 09.2736 ex 7607 11 90 75 Aluminium and magnesium alloy 1.1.-31.12. 600tonnes 0% ex 7607 11 90 77 strip or foil: ex 7607 11 90 78 — of an alloy conforming to stan­ ex 7607 11 90 79 dards 5182-H19 or 5052-H19, — in rolls with an outside dia­ meter of minimum 1 250 mm but not more than 1 350mm, — of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm, — of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm, — having a camber tolerance of not more than 0,4 mm/750 mm, — of a flatness measurement: I-unit ± 4, — having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and — of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %, for use in the manufacture of slats for blinds(1) 09.2722 8104 11 00 Unwrought magnesium, 1.1.-31.12. 120 000 0% containing at least 99,8 % by tonnes weight of magnesium 09.2840 ex 8104 30 00 20 Magnesium powder: 1.1.-31.12. 2 000 0% — of purity by weight of 98 % or tonnes more, but not more than 99,5 %, and — with a particle size of 0,2 mm or more but not more than 0,8 mm 09.2629 ex 8302 49 00 91 Aluminium telescopic handle for 1.1.-31.12. 1 500 000 0% use in the manufacture of pieces luggage(1) 09.2720 ex 8413 91 00 50 Pump head for two cylinder high 1.1.-31.12. 65 000 0% pressure pump made of forged pieces steel, with: — milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and24.6.2022 EN Official Journal of the European Union L 167/25 — drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm, of a kind used in diesel injection systems 09.2569 ex 8414 90 00 80 Turbocharger wheel housing of 1.1.-31.12. 4 000 000 0% cast aluminium alloy or cast iron: pieces — with a heat resistance up to 400 °C, — with a hole of 30 mm or more but not more than 300 mm for the insertion of the compres­ sor wheel, for use in the automotive industry(1) 09.2570 ex 8482 91 90 10 Rollers with a logarithmic profile 1.1.-31.12. 600 000 0% and a diameter of 25 mm or more pieces but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm, — made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290), — with a deviation of 0,5 mm or less as determined with the FBHmethod for use in wind turbine industry(1) 09.2738 ex 8482 99 00 30 Brass cages with the following 1.1.-31.12. 50 000 0% characteristics: pieces — continuously or centrifugally cast, — turned, — containing by weight 35 % or more, but not more than 38 % of zinc, — containing by weight 0,75 % or more, but not more than 1,25 % of lead, — containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and — with a tensile strength of 415 Pa or more, of a kind used for the manufacture of ball bearingsL 167/26 EN Official Journal of the European Union 24.6.2022 09.2857 ex 8482 99 00 50 Inner and outer rings made of 1.7.-31.12. 10 000 000 0% steel, not grinded, outer ring with kilograms an internal raceway, inner ring with an external raceway, with external diameters of: — 14 mm or more but not more than 77 mm for the inner ring, and — 26 mm or more but not more than 101 mm for the outer ring 09.2763 ex 8501 40 20 40 Electric AC commutator motor, 1.1.-31.12. 2 000 000 0% ex 8501 40 80 30 single-phase, with an output of pieces 250 W or more, an input power of 700 W or more but not more than 2 700W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30 000rpm but not more than 50 000rpm, equipped with air- inducting ventilator, for use in the manufacture of vacuum clea- ners(1) 09.2672 ex 8529 90 92 75 Printed circuit board with LED 1.1.-31.12. 115 000 0% ex 9405 42 31 70 diodes: 000pieces — whether or not equipped with prisms/lens, and — whether or not fitted with connector(s) for the manufacture of backlight units for goods of heading 8528(1) 09.2574 ex 8537 10 91 73 Multifunctional device 1.1.-31.12. 66 900 0% (instrument cluster) with: pieces — curved TFT LCD display (radius 750 mm) with touch- sensitive surfaces, — microprocessors and memory chips, — acoustic module and loud­ speaker, — connections for CAN, 3 x LIN bus, LVDS and Ethernet, — for operating various func­ tions (e.g. chassis, lighting) and24.6.2022 EN Official Journal of the European Union L 167/27 — for situation-related display of vehicle and navigation data (e. g. speed, odometer, charge level of the drive battery), for use in the manufacture of passenger cars powered solely by an electric motor covered by HS subheading 8703 80(1) 09.2003 ex 8543 70 90 63 Voltage controlled frequency 1.1.-31.12. 1 400 000 0% generator, consisting of active and pieces passive elements mounted on a printed circuit, contained in a housing with dimensions of not more than 30 mm × 30 mm 09.2910 ex 8708 99 97 75 Aluminium alloy support bracket, 1.1.-31.12. 200 000 0% with mounting holes, whether or pieces not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87(1) 09.2694 ex 8714 10 90 30 Axle clamps, housings, fork 1.1.-31.12. 1 000 000 0% bridges and clamping pieces, of pieces aluminium alloy of a kind used for motor bikes 09.2668 ex 8714 91 10 21 Bicycle frame, constructed from 1.1.-31.12. 600 000 0% ex 8714 91 10 31 carbon fibres and artificial pieces ex 8714 91 10 75 resin, for use in the manufacture of bicycles (including electric bicycles)(1) 09.2564 ex 8714 91 10 25 Frame, constructed from 1.1.-31.12. 9 600 000 0% ex 8714 91 10 35 aluminium or aluminium and pieces ex 8714 91 10 77 carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)(1) 09.2579 ex 9029 20 31 40 Clustered instrument panel with: 1.1.-31.12. 160 000 0%’ ex 9029 90 00 40 — stepping motors, pieces — analog pointers and dials, — or without microprocessor control board, — or without LED indicators or LCD display, — showing at least: — speed,L 167/28 EN Official Journal of the European Union 24.6.2022 — engine revolutions, — engine temperature, — the fuel level, — communicating via CAN-BUS and/or K-LINE protocols, for use in the manufacture of goods of Chapter 87(1) (1) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013. (2) However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.