Council Regulation (EU) 2025/2605 of 12 December 2025 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council on certain agricultural and industrial products

Official Journal EN of the European Union L series 2025/2605 30.12.2025 COUNCIL REGULATION (EU) 2025/2605 of 12 December 2025 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council on certain agricultural and industrial products THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof, Having regard to the proposal from the European Commission,

Whereas:

(1) In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances on the market for those products, Common Customs Tariff duties of the type referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council(1)(‘CCT duties’) on those products have been suspended by Council Regulation (EU) 2021/2278(2). As a result, the products listed in the Annex to Regulation (EU) 2021/2278 can be imported into the Union at reduced or zero duty rates without any limitation as regards their quantity.

(2) The Union production of certain products that are not listed in the Annex to Regulation (EU) 2021/2278 is inadequate to meet the specific requirements of the user industries in the Union. As it is in the Union’s interest to ensure an adequate supply of certain products and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to grant a complete suspension of the CCT duties on those products.

(3) With a view to promoting integrated battery production in the Union, a partial suspension of CCT duties should be granted in respect of certain products related to battery production that are currently not listed in the Annex to Regulation (EU) 2021/2278 and the Union production of which is inadequate to meet the specific requirements of the user industries in the Union. The date for the mandatory review of those suspensions should be 31 December 2026 in order for that review to take into account the short-term evolution of the battery production sector in the Union.

(4) It is necessary to amend the product description, classification, or end-use requirement for certain products listed in the Annex to Regulation (EU) 2021/2278 in order to take into account technical product developments and economic trends in the market.

(5) In accordance with Article 2(2) of Regulation (EU) 2021/2278 the Commission has reviewed certain CCT duty suspensions for products listed in the Annex to that Regulation. As it is in the interest of the Union to maintain those CCT duty suspensions for certain of those products, new dates should be set for their next mandatory review.

(6) It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) 2021/2278. Those products should therefore be removed from that Annex with effect from 1 January 2026.

(7) Regulation (EU) 2021/2278 should therefore be amended accordingly.

(8) In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 January 2026. This Regulation should therefore enter into force as a matter of urgency,

(1) Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1, ELI: http://data.europa.eu/eli/reg/2013/952/oj).

(2) Council Regulation (EU) 2021/2278 of 20 December 2021 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products, and repealing Regulation

(EU) No 1387/2013 (OJ L 466, 29.12.2021, p. 1, ELI: http://data.europa.eu/eli/reg/2021/2278/oj).

ELI: http://data.europa.eu/eli/reg/2025/2605/oj 1/382EN OJ L, 30.12.2025

HAS ADOPTED THIS REGULATION:

Article 1 The Annex to Regulation (EU) 2021/2278 is replaced by the text set out in the Annex to this Regulation.

Article 2 This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.

It shall apply from 1 January 2026.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 12 December 2025.

For the Council The President S. LOSE 2/382 ELI: http://data.europa.eu/eli/reg/2025/2605/ojANNEX ‘ANNEX Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3349 ex 0710 80 95 50 Bamboo shoots, frozen, not put up for retail sale 0 % — 31.12.2029

0.2829 ex 0711 59 00 11 Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, 0 % — 31.12.2026 Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry(1)

0.2463 ex 0712 32 00 10 Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices 0 % — 31.12.2029 or pieces, for treatment other than simple repacking for retail sale(1)(2) ex 0712 33 00 10 ex 0712 34 00 31 ex 0712 39 00 31

0.3347 ex 0804 10 00 30 Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or 0 % — 31.12.2029 food industries(1)

0.3228 ex 0811 90 95 20 Boysenberries, frozen, not containing added sugar, not put up for retail sale 0 % — 31.12.2029

0.2409 ex 0811 90 95 30 Pineapple (Ananas comosus), in pieces, frozen 0 % — 31.12.2029

0.2864 ex 1511 90 19 20 Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of: 0 % — 31.12.2027 ex 1511 90 91 20 — industrial monocarboxylic fatty acids of subheading 3823 19 10, ex 1513 11 10 20 — methyl esters of fatty acids of heading 2915 or 2916, ex 1513 19 30 20 — fatty alcohols of subheadings 2905 17, 2905 19 and 3823 70 used for the manufacture of cosmetics, washing products or pharmaceutical products, ex 1513 21 10 20 — fatty alcohols of subheading 2905 16, pure or mixed, used for the manufacture of ex 1513 29 30 20 cosmetics, washing products or pharmaceutical products, — stearic acid of subheading 3823 11 00, — goods of heading 3401, or — fatty acids with high purity of heading 2915(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 3/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3341 ex 1515 90 99 92 Vegetable oil, refined or semi-refined, containing by weight 35 % or more but not more than 0 % — 31.12.2029 57 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid

0.7686 1516 20 10 Hydrogenated castor oil, so called “opal-wax” 0 % — 31.12.2029

0.4080 ex 1517 90 99 30 Vegetable and/or microbial oil, refined, containing by weight: 0 % — 31.12.2026 — 25 % or more but not more than 70 % arachidonic acid and no more than 5 % docosahexenoic acid, or — 10 % or more but not more than 80 % of eicosapentaenoic acid and a minimum ratio of EPA/(EPA+DHA) over 20 %, standardized with vegetable oil

0.2423 ex 1902 30 10 40 Glass noodles containing 60 % or more by weight of mung bean starch in immediate packings 0 % — 31.12.2029 of 5 kg or more and not put up for retail sale

0.2866 ex 2005 91 00 10 Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 0 % — 31.12.2029 5 kg

0.5875 ex 2007 99 50 84 Papaya puree concentrate, obtained by cooking: 7,8 %(3) — 31.12.2029 ex 2007 99 50 94 — of the genus Carica spp., — with a sugar content by weight of more than 13 % but not more than 30 % for use in the manufacture of products of food and drink industry(1) 4/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5867 ex 2007 99 50 85 Guava puree concentrate, obtained by cooking: 6 %(3) — 31.12.2029 ex 2007 99 50 95 — of the genus Psidium spp., — with a sugar content by weight of more than 13 % but not more than 30 % for use in the manufacture of products of food and drink industry(1)

0.4716 *ex 2008 93 91 20 Sweetened dried cranberries, for the manufacture of products of food processing industries 0 % — 31.12.2027 (excluding packing or pasteurization alone as processing)(1)(4)

0.5587 ex 2008 99 49 70 Blanched vine leaves of the genus Karakishmish, in brine, containing by weight: 0 % — 31.12.2027 ex 2008 99 99 11 — more than 6 % of salt concentration, — 0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate and — whether or not but not more than 2 000 mg/kg of sodium benzoate according CODEX STAN 192-1995 for use in the manufacture of stuffed vine leaves with rice(1)

0.7767 ex 2008 99 99 35 Frozen pulp from acai berries: 0 % — 31.12.2029 — hydrated and pasteurised, — separated from the kernels by the addition of water, — with a Brix value of less than 6, and — with a sugar content of less than 5,6 %

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 5/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4664 ex 2009 49 30 91 Pineapple juice, other than in powder form: 0 % — 31.12.2029 — with a Brix value of more than 20 but not more than 67, — a value of more than € 30 per 100 kg net weight, — containing added sugar used in the manufacture of products of food or drink industry(1)

0.4623 ex 2009 81 31 10 Cranberry (Vaccinium macrocarpon) juice concentrate: 0 % l 31.12.2029 — of a Brix value of 40 or more but not more than 66, — in immediate packings of a content of 50 litres or more

0.6050 ex 2009 89 79 30 Frozen acerola juice concentrate: 0 % l 31.12.2029 — with a Brix value of more than 48 but not more than 67, — in immediate packings of a content of 50 litres or more

0.5206 ex 2009 89 79 85 Acai berry juice concentrate: 0 % — 31.12.2026 — of the species Euterpe oleracea, — frozen, — not sweetened, — not in powder form, — of a Brix value of 23 or more but not more than 32, in immediate packings of a content of 10 kg or more 6/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4157 ex 2009 89 99 96 Coconut water 0 % l 31.12.2026 — unfermented, — not containing added spirit or sugar, and — in immediate packing of a content of 20 litres or more(2)

0.6152 ex 2106 10 20 20 Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, 0 % — 31.12.2029 of 65 % or more but not more than 90 % in powder or textured form

0.7284 ex 2106 90 92 50 Casein protein hydrolysate consisting of: 0 % — 31.12.2027 ex 3504 00 90 10 — by weight 20 % or more but not more than 70 % free amino acids, and — peptones of which by weight more than 90 % having a molecular weight of not more than 2 000 Da

0.5246 ex 2519 90 10 10 Fused magnesia with a purity by weight of 94 % or more 0 % — 31.12.2026

0.6168 ex 2707 99 99 10 Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use 0 % — 31.12.2029 as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 27(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 7/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8144 *ex 2710 12 25 20 Mixture of C6 aliphatic hydrocarbons (CAS RN 92112-69-1), containing by weight 60 % or 0 % — 31.12.2030 more but not more than 80 % of n-hexane (CAS RN 110-54-3), with: — a specific gravity of 0,666 or more but not more than 0,686, — a total of carbonyl compounds of less than 1 ppm, — a total of acetylenic compounds of less than 2 ppm

0.7823 ex 2710 19 81 30 Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic 0 % — 31.12.2029 hydrocarbons, containing: ex 2710 19 99 50 — 90 % or more by weight of saturates, and — not more than 0,03 % by weight of sulphur, and with — a viscosity index of 80 or more, but less than 120, and — a kinematic viscosity less than 5,0 cSt at 100 °C or more than 13,0 cSt at 100 °C

0.7822 ex 2710 19 81 40 Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic 0 % — 31.12.2029 hydrocarbons, containing: ex 2710 19 99 60 — 90 % or more by weight of saturates, and — not more than 0,03 % by weight of sulphur, with a viscosity index of 120 or more 8/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6495 ex 2710 19 99 20 Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy 0 % — 31.12.2029 paraffin conversion process (HPC), containing: — not more than 1 mg/kg of sulphur — more than 99 % by weight of saturated hydrocarbons — more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50; and — a kinematic viscosity at 40 °C of more than 6,5 mm2/s, or — a kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more

0.7393 ex 2712 90 99 10 Blend of 1-alkenes containing by weight 90 % or more 1-alkenes of a chain length of 24 0 % — 31.12.2027 carbon atoms or more but not more than 1 % 1-alkenes of a chain length of more than 70 carbon atoms

0.8021 2804 70 10 Red phosphorus 0 % — 31.12.2027

0.8022 2804 70 90 Phosphorus, other than red phosphorus 0 % — 31.12.2029

0.6658 *ex 2805 12 00 10 Calcium with a purity of 98 % or more by weight, in powder or wire form 0 % — 31.12.2030 (CAS RN 7440-70-2)

0.5609 ex 2805 19 90 20 Lithium metal (CAS RN 7439-93-2) of a purity by weight of 98,8 % or more 0 % — 31.12.2027

0.2559 ex 2805 30 10 10 Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 9/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4979 *2805 30 21 Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more 0 % — 31.12.2030 2805 30 29 2805 30 31 2805 30 39 2805 30 40

0.6836 ex 2811 22 00 15 Amorphous silicon dioxide (CAS RN 60676-86-0) 0 % — 31.12.2029 — in the form of powder — of a purity by weight of 99,0 % or more — with a median grain size of 0,7 μm or more, but not more than 2,1 μm — where 70 % of the particles have a diameter of not more than 3 μm

0.8865 ex 2811 22 00 80 Amorphous silicon dioxide (CAS RN 112926-00-8), 0 % — 31.12.2029 — in the form of powder, — of a purity by weight of 98 % or more, — with a median grain size of 150 μm or more, but not more than 250 μm, — where 90 % of the particles have a diameter of more than 3 μm, for use in the manufacture of tyres(1)

0.7292 ex 2811 29 90 10 Tellurium dioxide (CAS RN 7446-07-3) 0 % — 31.12.2027

0.3308 ex 2812 90 00 10 Nitrogen trifluoride (CAS RN 7783-54-2) 0 % — 31.12.2029 10/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5747 ex 2816 40 00 10 Barium hydroxide (CAS RN 17194-00-2) 0 % — 31.12.2027

0.7594 ex 2818 10 11 10 Sol-Gel corundum (CAS RN 1302-74-5) with an aluminium oxide content of 99,6 % or more 0 % — 31.12.2029 by weight, having a micro crystalline structure in the form of rods with an aspect ratio of 1,3 or more, but not more than 6,0

0.8425 ex 2818 10 11 20 Sintered corundum with a micro crystalline structure, consisting of aluminium oxide 0 % — 31.12.2027 (CAS RN 1344-28-1) and magnesium aluminate (CAS RN 12068-51-8), with a content by ex 2818 10 91 30 weight (calculated as oxides) of:

— 92 % or more of aluminium oxide, and — 8 % or less of magnesium oxide

0.5110 *ex 2818 10 91 20 Sintered corundum with a micro crystalline structure, consisting of aluminium oxide 0 % — 31.12.2030 (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:

— 92 % or more, but less than 98,5 % of aluminium oxide, — 2 % (± 1,5 %) of magnesium oxide, — 1 % (± 0,6 %) of yttrium oxide, and — either 3 % (± 2,2 %) of lanthanum oxide or — 2 % (± 1,2 %) of lanthanum oxide and neodymium oxide, with less than 50 % of the total weight having a particle size of more than 10 mm

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 11/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4640 ex 2818 20 00 10 Activated alumina with a specific surface area of at least 350 m2/g 0 % — 31.12.2029

0.6837 *ex 2818 30 00 20 Aluminium hydroxide (CAS RN 21645-51-2) 0 % — 31.12.2030 — in the form of powder, — with a purity by weight of 99,5 % or more, — with a decomposition point of 263 °C or more, — with a particle size of 4 μm (± 1 μm), — with a Total-NaO-content by weight of not more than 0,06 % 2

0.3306 ex 2818 30 00 30 Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite 0 % — 31.12.2029 (CAS RN 1318-23-6)

0.5369 ex 2819 90 90 10 Dichromium trioxide (CAS RN 1308-38-9) for use in metallurgy(1) 0 % — 31.12.2026

0.5576 ex 2825 10 00 10 Hydroxylammonium chloride (CAS RN 5470-11-1) 0 % — 31.12.2027

0.7897 *ex 2825 20 00 10 Lithium hydroxide monohydrate (CAS RN 1310-66-3) with a purity by weight of 99 % or 2,6 % — 31.12.2026 more

0.3800 2825 30 00 Vanadium oxides and hydroxides 0 % — 31.12.2026

0.3303 ex 2825 50 00 20 Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % 0 % — 31.12.2029 of chloride

0.6819 *ex 2825 50 00 30 Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm 0 % — 31.12.2030 12/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5555 ex 2825 60 00 10 Zirconium dioxide (CAS RN 1314-23-4) 0 % — 31.12.2027

0.7193 ex 2825 70 00 20 Molybdic Acid (CAS RN 7782-91-4) 0 % — 31.12.2026

0.5055 *ex 2826 19 90 10 Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more 0 % — 31.12.2030

0.8296 *ex 2826 90 80 30 Lithium hexafluorophosphate (CAS RN 21324-40-3) with a purity by weight of 99 % or more 2,7 % — 31.12.2026

0.2865 *ex 2827 39 85 10 Copper monochloride (CAS RN 7758-89-6) with a purity by weight of 96 % or more 0 % — 31.12.2029

0.4180 ex 2827 39 85 20 Antimony pentachloride (CAS RN 7647-18-9) of a purity by weight of 99 % or more 0 % — 31.12.2026

0.6143 ex 2827 39 85 40 Barium chloride dihydrate (CAS RN 10326-27-9) 0 % — 31.12.2029

0.8936 *ex 2827 49 90 10 Zirconium dichloride oxide (CAS RN 7699-43-6) with a purity by weight of 95 % or more 0 % — 31.12.2030

0.6463 ex 2827 60 00 10 Sodium iodide (CAS RN 7681-82-5) 0 % — 31.12.2029

0.7596 ex 2828 10 00 10 Calcium hypochlorite (CAS RN 7778-54-3) having an active chlorine content of 65 % or 0 % — 31.12.2029 more

0.3859 ex 2833 29 80 20 Manganese sulphate monohydrate (CAS RN 10034-96-5) 0 % — 31.12.2029

0.4338 ex 2835 10 00 10 Sodium hypophosphite monohydrate (CAS RN 10039-56-2) 0 % — 31.12.2027

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 13/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6144 ex 2835 10 00 20 Sodium hypophosphite (CAS RN 7681-53-0) 0 % — 31.12.2029

0.7452 ex 2835 10 00 30 Aluminium Phosphinate (CAS RN 7784-22-7) 0 % — 31.12.2029

0.8448 ex 2835 10 00 40 Calcium phosphinate (CAS RN 7789-79-9) with a purity by weight of 98 % or more 0 % — 31.12.2027

0.2524 ex 2836 91 00 20 Lithium carbonate, containing one or more of the following impurities at the concentrations 0 % — 31.12.2029

indicated: — 2 mg/kg or more of arsenic, — 200 mg/kg or more of calcium, — 200 mg/kg or more of chlorides, — 20 mg/kg or more of iron, — 150 mg/kg or more of magnesium, — 20 mg/kg or more of heavy metals, — 300 mg/kg or more of potassium, — 300 mg/kg or more of sodium, — 200 mg/kg or more of sulphates, determined according to the methods specified in the European Pharmacopœia

0.2863 ex 2836 99 17 30 Zirconium (IV) basic carbonate (CAS RN 57219-64-4 or 37356-18-6) with a purity by weight 0 % — 31.12.2029 of 96 % or more 14/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3300 ex 2837 19 00 20 Copper cyanide (CAS RN 544-92-3) 0 % — 31.12.2029

0.4078 ex 2837 20 00 10 Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9) 0 % — 31.12.2026

0.2861 ex 2839 90 00 20 Calcium silicate (CAS RN 1344-95-2) 0 % — 31.12.2029

0.6632 *ex 2840 20 90 10 Zinc borate (CAS RN 12767-90-7) 0 % — 31.12.2030

0.8520 ex 2840 20 90 20 Barium borate (CAS RN 13701-59-2) with a purity by weight of 99 % or more 0 % — 31.12.2027

0.6482 ex 2841 70 00 30 Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate 0 % — 31.12.2029 (CAS RN 12054-85-2)

0.4323 ex 2841 80 00 10 Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5) 0 % — 31.12.2027

0.8441 ex 2841 80 00 20 Disodium wolframate (CAS RN 13472-45-2) with a purity by weight of 90 % or more 0 % — 31.12.2027

0.7301 ex 2841 90 30 10 Potassium metavanadate (CAS RN 13769-43-2) 0 % — 31.12.2027

0.5936 ex 2841 90 70 20 Potassium titanium oxide (CAS RN 12056-51-8) in powder form with a purity of 99 % or 0 % — 31.12.2029 more

0.4416 ex 2842 10 00 10 Synthetic beta zeolite powder 0 % — 31.12.2029

0.4588 ex 2842 10 00 20 Synthetic chabasite zeolite powder 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 15/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7397 ex 2842 10 00 50 Fluorphlogopite (CAS RN 12003-38-2) 0 % — 31.12.2027

0.7097 ex 2842 10 00 60 Aluminosilicate (CAS RN 1318-02-1) with 0 % — 31.12.2026 — a purity by weight of 94 % or more, — a zeolite structure of aluminophosphate-eighteen (AEI), and — a phase purity of 90 % or more for use in the manufacture of copper zeolite(1)

0.4642 ex 2842 90 10 10 Sodium selenate (CAS RN 13410-01-0) 0 % — 31.12.2029

0.3295 2845 10 00 Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0) 0 % — 31.12.2029

0.4189 2845 40 00 Helium-3 (CAS RN 14762-55-1) 0 % — 31.12.2026

0.3297 2845 90 10 Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in 0 % — 31.12.2029 deuterium; mixtures and solutions containing these products (Euratom)

0.4191 ex 2845 90 90 20 Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2) 0 % — 31.12.2029

0.4190 ex 2845 90 90 30 (13C)Carbon monoxide (CAS RN 1641-69-6) 0 % — 31.12.2026

0.8426 ex 2845 90 90 50 Ytterbium oxide (CAS RN 1380743-42-9), with a purity by weight of 99 % or more, enriched 0 % — 31.12.2027 to 99,0 % or more but not more than 99,8 % of Ytterbium-176 16/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2859 ex 2846 10 00 10 Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of 0 % — 31.12.2029 rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron ex 3824 99 96 53 oxide, and having a loss on ignition of 5 % or more by weight

0.3296 ex 2846 10 00 20 Dicerium tricarbonate (CAS RN 537-01-9), whether or not hydrated 0 % — 31.12.2029

0.3420 ex 2846 10 00 30 Cerium lanthanum carbonate, whether or not hydrated 0 % — 31.12.2029

0.3227 2846 90 30 Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of 0 % — 31.12.2029 mixtures of these metals, other than those of subheading 2846 10 00 2846 90 40 2846 90 50 2846 90 60 2846 90 70 2846 90 90

0.3418 ex 2850 00 20 10 Silane (CAS RN 7803-62-5) 0 % — 31.12.2029

0.5497 ex 2850 00 20 40 Germanium tetrahydride (CAS RN 7782-65-2) 0 % — 31.12.2026

0.7302 ex 2850 00 20 60 Disilane (CAS RN 1590-87-0) 0 % — 31.12.2027

0.7555 ex 2850 00 20 70 Cubic Boron nitride (CAS RN 10043-11-5) 0 % — 31.12.2029

0.3419 *ex 2850 00 20 80 Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more, for use in the 0 % — 31.12.2030 production of semiconductors(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 17/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4492 ex 2850 00 60 10 Sodium azide (CAS RN 26628-22-8) 0 % — 31.12.2029

0.3421 ex 2853 90 90 20 Phosphine (CAS RN 7803-51-2) 0 % — 31.12.2029

0.8282 ex 2903 19 00 20 1,3-Dichloropropane (CAS RN 142-28-9) with a purity by weight of 99 % or more 0 % — 31.12.2026

0.8906 *ex 2903 29 00 20 trans-1,2-Dichloroethylene (CAS RN 156-60-5) with a purity by weight of 99 % or more 0 % — 31.12.2030

0.6633 *2903 42 00 Difluoromethane (CAS RN 75-10-5) 0 % — 31.12.2030

0.2854 ex 2903 49 30 10 Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0) 0 % — 31.12.2029

0.2852 ex 2903 49 30 20 Perfluoroethane (CAS RN 76-16-4) 0 % — 31.12.2029

0.5803 ex 2903 51 00 10 2,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1) 0 % — 31.12.2027

0.4517 ex 2903 51 00 20 Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 29118-24-9) 0 % — 31.12.2029

0.4066 ex 2903 59 00 30 Hexafluoropropene (CAS RN 116-15-4) 0 % — 31.12.2026

0.7324 ex 2903 59 00 40 1,1,2,3,4,4-Hexafluorobuta-1,3-diene (CAS RN 685-63-2) 0 % — 31.12.2027

0.8553 ex 2903 69 19 25 (E)-1,4-Dibrombut-2-ene (CAS RN 821-06-7) with a purity by weight of 98 % or more 0 % — 31.12.2028 18/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8525 ex 2903 69 19 35 2,2-Dibromopropane (CAS RN 594-16-1) with a purity by weight of 99 % or more 0 % — 31.12.2028

0.7974 *ex 2903 69 19 40 3-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more 0 % — 31.12.2026

0.8318 ex 2903 69 19 50 Vinyl bromide (CAS RN 593-60-2) with a purity by weight of 98 % or more, or as a solution 0 % — 31.12.2027 in tetrahydrofuran (CAS RN 109-99-9) containing by weight 23 % or more, but not more than 26 % vinylbromide

0.8151 ex 2903 69 19 60 1-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity by weight of 99 % or more 0 % — 31.12.2026

0.7895 ex 2903 72 00 10 Dichloro-1,1,1-trifluoroethane (CAS RN 306-83-2) with a purity by weight of 99 % or more 0 % — 31.12.2029

0.5212 ex 2903 77 90 10 Chlorotrifluoroethylene (CAS RN 79-38-9) 0 % — 31.12.2026

0.6485 ex 2903 79 30 10 Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0) 0 % — 31.12.2029

0.5765 ex 2903 89 70 50 Chlorocyclopentane (CAS RN 930-28-9) 0 % — 31.12.2027

0.7304 ex 2903 89 70 60 Octafluorocyclobutane (CAS RN 115-25-3) 0 % — 31.12.2027

0.8803 ex 2903 99 80 10 4-Bromo-2-fluorobiphenyl (CAS RN 41604-19-7) with a purity by weight of 99 % or more 0 % — 31.12.2029

0.8492 ex 2903 99 80 18 1-Fluoronaphthalene (CAS RN 321-38-0) with a purity by weight of 99 % or more 0 % — 31.12.2027

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 19/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3410 ex 2903 99 80 20 1,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9) 0 % — 31.12.2029

0.8557 ex 2903 99 80 23 3,5-Bis(trifluoromethyl) benzylbromide (CAS RN 32247-96-4) with a purity by weight of 0 % — 31.12.2028 95 % or more

0.8017 *ex 2903 99 80 25 2,2'-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more 0 % — 31.12.2030

0.8018 *ex 2903 99 80 35 2-Bromo-9,9'-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or 0 % — 31.12.2030 more

0.3411 ex 2903 99 80 40 2,6-Dichlorotoluene (CAS RN 118-69-4), of a purity by weight of 99 % or more and 0 % — 31.12.2029

containing: — 0,001 mg/kg or less of tetrachlorodibenzodioxines, — 0,001 mg/kg or less of tetrachlorodibenzofurans, — 0,2 mg/kg or less of tetrachlorobiphenyls

0.8076 *ex 2903 99 80 45 1-Bromo-4-(trans-4-propylcyclohexyl)benzene (CAS RN 86579-53-5) with a purity by weight 0 % — 31.12.2030 of 95 % or more

0.4529 ex 2903 99 80 50 Fluorobenzene (CAS RN 462-06-6) 0 % — 31.12.2029

0.8101 *ex 2903 99 80 55 1-Bromo-4-(trans-4-ethylcyclohexyl)benzene (CAS RN 91538-82-8) with a purity by weight 0 % — 31.12.2030 of 95 % or more

0.8166 ex 2903 99 80 65 2,6-Difluorobenzyl bromide (CAS RN 85118-00-9) with a purity by weight of 97 % or more 0 % — 31.12.2026 20/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8177 ex 2903 99 80 70 1-[Chloro(phenyl)methyl]-2-methylbenzene (CAS RN 41870-52-4) with a purity by weight of 0 % — 31.12.2026 99 % or more

0.5917 *ex 2903 99 80 83 1-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9) with a purity by weight of 99 % or 0 % — 31.12.2029 more

0.3407 ex 2904 10 00 30 Sodium p-styrenesulphonate (CAS RN 2695-37-6) 0 % — 31.12.2029

0.4686 ex 2904 10 00 50 Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8) 0 % — 31.12.2029

0.3409 *ex 2904 20 00 10 Nitromethane (CAS RN 75-52-5) 0 % — 31.12.2030

0.3391 ex 2904 20 00 20 Nitroethane (CAS RN 79-24-3) 0 % — 31.12.2027

0.3408 *ex 2904 20 00 30 1-Nitropropane (CAS RN 108-03-2) 0 % — 31.12.2030

0.3390 ex 2904 20 00 40 2-Nitropropane (CAS RN 79-46-9) 0 % — 31.12.2029

0.2526 ex 2904 99 00 20 1-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7) 0 % — 31.12.2029

0.6612 *ex 2904 99 00 25 Difluoromethanesulphonyl chloride (CAS RN 1512-30-7) 0 % — 31.12.2030

0.3388 ex 2904 99 00 30 Tosyl chloride (CAS RN 98-59-9) 0 % — 31.12.2029

0.5745 ex 2904 99 00 40 4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2) 0 % — 31.12.2027

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 21/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6001 ex 2904 99 00 50 Ethanesulphonyl chloride (CAS RN 594-44-5) 0 % — 31.12.2029

0.7957 *ex 2904 99 00 55 2,4-Dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by 0 % — 31.12.2030 weight of 96 % or more

0.6407 ex 2904 99 00 60 4,4'-Dinitrostilbene-2,2'-disulfonic acid (CAS RN 128-42-7) 0 % — 31.12.2029

0.8160 ex 2904 99 00 65 4-Nitrotoluene-2-sulphonic acid (CAS RN 121-03-9) in powder form, with a purity by weight 0 % — 31.12.2026 of 80 % or more and a content of water by weight of 15 % or more

0.6560 ex 2904 99 00 80 1-Chloro-2-nitrobenzene (CAS RN 88-73-3) 0 % — 31.12.2029

0.6186 ex 2905 11 00 10 Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more 0 % — 31.12.2029

0.2967 ex 2905 19 00 11 Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in 0 % — 31.12.2029 tetrahydrofuran according to note 1e) to Chapter 29 of the CN

0.6118 ex 2905 19 00 20 Butyltitanate monohydrate, homopolymer (CAS RN162303-51-7) 0 % — 31.12.2029

0.6119 ex 2905 19 00 25 Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6) 0 % — 31.12.2029

0.5534 ex 2905 19 00 70 Titanium tetrabutanolate (CAS RN 5593-70-4) 0 % — 31.12.2027

0.5533 ex 2905 19 00 80 Titanium tetraisopropoxide (CAS RN 546-68-9) 0 % — 31.12.2027 22/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6002 ex 2905 19 00 85 Titanium tetraethanolate (CAS RN 3087-36-3) 0 % — 31.12.2029

0.6464 ex 2905 22 00 10 Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-Linalool 0 % — 31.12.2029 (CAS RN 126-91-0)

0.7114 *ex 2905 22 00 30 (±)-β-Citronellol (CAS RN 106-22-9) with a purity by weight of 94 % or more 0 % — 31.12.2026

0.7388 ex 2905 29 90 10 Cis-hex-3-en-1-ol (CAS RN 928-96-1) 0 % — 31.12.2027

0.8544 ex 2905 39 95 15 2,5-Dimethylhexane-2,5-diol (CAS RN 110-03-2) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.8619 ex 2905 39 95 25 Pinacol (CAS RN 76-09-5) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.5255 ex 2905 39 95 30 2,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7) 0 % — 31.12.2026

0.8937 *ex 2905 39 95 35 Propane-1,3-diol (CAS RN 504-63-2) with a purity by weight of 99 % or more 0 % — 31.12.2030

0.5847 ex 2905 39 95 40 Decane-1,10-diol (CAS RN 112-47-0) 0 % — 31.12.2027

0.8932 *ex 2905 39 95 45 2,5,7,10,11,14-hexaoxa-1,6-distibabicyclo[4.4.4]tetradecane (CAS RN 29736-75-2) with 0 % — 31.12.2030 a purity by weight of 99 % or more

0.5908 ex 2905 39 95 50 2-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 23/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7701 ex 2905 39 95 60 Dodecane-1,12-diol (CAS RN 5675-51-4) 0 % — 31.12.2029

0.7914 ex 2905 39 95 70 2-Methylpropane-1,3-diol (CAS RN 2163-42-0) with a purity by weight of 98 % or more 0 % — 31.12.2029

0.8370 ex 2905 39 95 80 Pentane-1,5-diol (CAS RN 111-29-5) with a purity by weight of 97 % or more 0 % — 31.12.2027

0.4624 ex 2905 59 98 20 2,2,2-Trifluoroethanol (CAS RN 75-89-8) 0 % — 31.12.2029

0.3378 ex 2906 19 00 10 Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8) 0 % — 31.12.2027

0.3380 ex 2906 19 00 20 4,4’-Isopropylidenedicyclohexanol (CAS RN 80-04-6) 0 % — 31.12.2029

0.6257 ex 2906 19 00 50 4-tert-Butylcyclohexanol (CAS RN 98-52-2) 0 % — 31.12.2029

0.8231 ex 2906 19 00 60 5-Methyl-2-(prop-1-en-2-yl)cyclohexanol, mixture of isomers (CAS RN 7786-67-6) with 0 % — 31.12.2026 a purity by weight of 90 % or more

0.8721 ex 2906 19 00 70 (1S,2S,3R,5S)-(+)-2,3-Pinanediol (CAS RN 18680-27-8) with a purity by weight of 98 % or 0 % — 31.12.2029 more

0.8929 *ex 2906 29 00 25 (2-Bromo-5-iodophenyl)methanol (CAS RN 946525-30-0) with a purity by weight of 98 % or 0 % — 31.12.2030 more

0.7373 ex 2906 29 00 50 2,2'-(m-Phenylene)dipropan-2-ol (CAS RN 1999-85-5) 0 % — 31.12.2027

0.7806 ex 2906 29 00 60 3-[3-(Trifluoromethyl)phenyl]propan-1-ol (CAS RN 78573-45-2) 0 % — 31.12.2029 24/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5855 ex 2906 29 00 85 2-Phenylethanol (CAS RN 60-12-8) with a purity by weight of 95 % or more 0 % — 31.12.2027

0.6329 ex 2907 12 00 20 Mixture of meta-cresol (CAS RN 108-39-4) and para-cresol (CAS RN 106-44-5) with a purity 0 % — 31.12.2029 by weight of 99 % or more

0.6559 *ex 2907 12 00 40 p-Cresol (CAS RN 106-44-5) with a purity by weight of 99 % or more 0 % — 31.12.2029

0.5216 ex 2907 15 90 10 2-Naphthol (CAS RN 135-19-3) 0 % — 31.12.2026

0.6256 *ex 2907 19 10 20 2,6-Xylenol (CAS RN 576-26-1) with a purity by weight of 99 % or more 0 % — 31.12.2029

0.4480 ex 2907 19 90 20 Biphenyl-4-ol (CAS RN 92-69-3) 0 % — 31.12.2029

0.7753 ex 2907 19 90 30 2-Methyl-5-(propan-2-yl)phenol (CAS RN 499-75-2) 0 % — 31.12.2029

0.3372 ex 2907 21 00 10 Resorcinol (CAS RN 108-46-3) 0 % — 31.12.2029

0.8482 ex 2907 29 00 13 4,4'-Methylenedi-2,6-xylenol (CAS RN 5384-21-4) with a purity by weight of 98,5 % or more 0 % — 31.12.2027

0.6026 ex 2907 29 00 15 6,6'-Di-tert-butyl-4,4'-butylidenedi-m-cresol (CAS RN 85-60-9) 0 % — 31.12.2029

0.3367 ex 2907 29 00 30 4,4',4"-Ethylidynetriphenol (CAS RN 27955-94-8) 0 % — 31.12.2029

0.2584 *ex 2907 29 00 33 2,2′,2″,6,6′,6″-Hexa-tert-butyl-α,α′,α″-(mesitylen-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2) 0 % — 31.12.2029 with a purity by weight of 98 % or more

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 25/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7402 *ex 2907 29 00 38 Biphenyl-4,4'-diol (CAS RN 92-88-6) with a purity by weight of 99 % or more 0 % — 31.12.2029

0.5432 ex 2907 29 00 45 2-Methylhydroquinone (CAS RN 95-71-6) 0 % — 31.12.2026

0.3848 ex 2907 29 00 85 Phloroglucinol anhydrous (CAS RN 108-73-6) or phloroglucinol dihydrate 0 % — 31.12.2029 (CAS RN 6099-90-7) with a purity by weight of 95 % or more

0.5914 ex 2908 19 00 20 4,4'-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1) 0 % — 31.12.2029

0.6260 ex 2908 19 00 30 4-Chlorophenol (CAS RN 106-48-9) 0 % — 31.12.2029

0.8204 ex 2908 19 00 70 2,3,6-Trifluorophenol (CAS RN 113798-74-6) with a purity by weight of 98 % or more 0 % — 31.12.2026

0.3359 ex 2909 19 90 30 Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of 0 % — 31.12.2029 a purity by weight of 99 % or more

0.4035 ex 2909 19 90 50 3-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9) 0 % — 31.12.2026

0.5407 ex 2909 20 00 10 8-Methoxycedrane (CAS RN 19870-74-7) 0 % — 31.12.2026

0.5503 ex 2909 30 39 20 1,1’-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] 0 % — 31.12.2026 (CAS RN 21850-44-2)

0.6649 *ex 2909 30 39 30 1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene 0 % — 31.12.2030 (CAS RN 97416-84-7) 26/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7828 ex 2909 30 39 50 2-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or 0 % — 31.12.2029 more

0.4710 ex 2909 30 90 10 2-(Phenylmethoxy)naphthalene (CAS RN 613-62-7) 0 % — 31.12.2029

0.7176 ex 2909 30 90 15 {[(2,2-Dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3) 0 % — 31.12.2026

0.4711 ex 2909 30 90 20 1,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1) 0 % — 31.12.2029

0.7115 ex 2909 30 90 25 1,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion 0 % — 31.12.2026 containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane

0.8167 ex 2909 30 90 45 5-Bromo-1,3-difluoro-2-(trifluoromethoxy)benzene (CAS RN 115467-07-7) with a purity by 0 % — 31.12.2026 weight of 95 % or more

0.6783 *ex 2909 30 90 50 1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6) 0 % — 31.12.2030

0.5117 *ex 2909 30 90 55 3,4,5-Trimethoxytoluene (CAS RN 6443-69-2) with a purity by weight of 98 % or more 0 % — 31.12.2030

0.6994 ex 2909 30 90 70 O,O,O-1,3,5-trimethylresorcinol (CAS RN 621-23-8) 0 % — 31.12.2026

0.7706 ex 2909 44 00 10 2-Propoxyethanol (CAS RN 2807-30-9) 0 % — 31.12.2029

0.6927 ex 2909 49 80 10 1-Propoxypropan-2-ol (CAS RN 1569-01-3) 0 % — 31.12.2026

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 27/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8241 ex 2909 49 80 30 3,4-Dimethoxybenzyl alcohol (CAS RN 93-03-8) with a purity by weight of 98 % or more 0 % — 31.12.2026

0.8531 ex 2909 49 80 40 2,2'-p-Phenylenedioxydiethanol (CAS RN 104-38-1) with a purity by weight of 99 % or more 0 % — 31.12.2028

0.8862 ex 2909 49 80 50 2,2’-[Oxybis(methylene)]bis[2-ethylpropane-1,3-diol] (CAS RN 23235-61-2) with a purity by 0 % — 31.12.2029 weight of 95 % or more

0.3484 ex 2909 50 00 10 4-(2-Methoxyethyl)phenol (CAS RN 56718-71-9) 0 % — 31.12.2029

0.3682 ex 2909 60 90 40 Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3) with a purity by weight of 98 % or more 2,8 % — 31.12.2026

0.7910 ex 2909 60 90 50 Solution of 3,6,9-(ethyl and/or propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes 0 % — 31.12.2029 (CAS RN 1613243-54-1) in mineral spirits (CAS RN 1174522-09-8), containing by weight 25 % or more, but not more than 41 % of the hexoxonanes

0.7744 ex 2910 90 00 10 2-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4) 0 % — 31.12.2029

0.5940 ex 2910 90 00 15 1,2-Epoxycyclohexane (CAS RN 286-20-4) 0 % — 31.12.2029

0.7672 ex 2910 90 00 25 Phenyloxirane (CAS RN 96-09-3) 0 % — 31.12.2029

0.2649 ex 2910 90 00 30 2,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5) 0 % — 31.12.2029

0.6660 *ex 2910 90 00 50 2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1) 0 % — 31.12.2030 28/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4361 ex 2910 90 00 80 Allyl glycidyl ether (CAS RN 106-92-3) 0 % — 31.12.2026

0.7116 ex 2912 19 00 10 Undecanal (CAS RN 112-44-7) 0 % — 31.12.2026

0.8073 *ex 2912 19 00 20 Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more for the 0 % — 31.12.2030 production of perfume or pharmaceutical intermediaries(1)

0.6968 ex 2912 29 00 15 2,6,6-Trimethylcyclohexenecarbaldehyde (alpha-beta isomers mixture) (CAS RN 52844-21-0) 0 % — 31.12.2026

0.7314 ex 2912 29 00 35 Cinnamaldehyde (CAS RN 104-55-2) 0 % — 31.12.2027

0.8604 ex 2912 29 00 65 Terephthalaldehyde (CAS RN 623-27-8) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.6072 ex 2912 29 00 70 4-tert-Butylbenzaldehyde (CAS RN 939-97-9) 0 % — 31.12.2029

0.5135 *ex 2912 49 00 30 Salicylaldehyde (CAS RN 90-02-8) 0 % — 31.12.2030

0.7353 ex 2912 49 00 50 2,6-Dihydroxybenzaldehyde (CAS RN 387-46-2) 0 % — 31.12.2027

0.8582 ex 2912 49 00 60 4-Hydroxybenzaldehyde (CAS RN 123-08-0) with a purity by weight of 96 % or more 0 % — 31.12.2028

0.8911 *ex 2912 49 00 70 5-(1,1-Dimethylethyl)-2-methoxybenzaldehyde (CAS RN 85943-26-6) with a purity by 0 % — 31.12.2030 weight of 98 % or more

0.7712 ex 2913 00 00 10 2-Nitrobenzaldehyde (CAS RN 552-89-6) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 29/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8328 ex 2913 00 00 20 4-(Difluoromethoxy)-3-hydroxybenzaldehyde (CAS RN 151103-08-1) with a purity by 0 % — 31.12.2029 weight of 98 % or more

0.8552 ex 2913 00 00 30 2-Hydroxy-5-nitrobenzaldehyde (CAS RN 97-51-8) with a purity by weight of 95 % or more 0 % — 31.12.2028

0.4228 ex 2914 19 90 20 Heptan-2-one (CAS RN 110-43-0) 0 % — 31.12.2027

0.4274 ex 2914 19 90 30 3-Methylbutanone (CAS RN 563-80-4) 0 % — 31.12.2027

0.4275 ex 2914 19 90 40 Pentan-2-one (CAS RN 107-87-9) 0 % — 31.12.2027

0.7554 ex 2914 19 90 60 Zinc acetylacetonate (CAS RN 14024-63-6) 0 % — 31.12.2029

0.7568 ex 2914 29 00 15 Oestr-5 (10) -ene-3,17-dione (CAS RN 3962-66-1) 0 % — 31.12.2029

0.3475 ex 2914 29 00 20 Cyclohexadec-8-enone (CAS RN 3100-36–5) 0 % — 31.12.2029

0.7450 ex 2914 29 00 25 Cyclohex-2-enone (CAS RN 930-68-7) 0 % — 31.12.2029

0.4933 *ex 2914 29 00 30 (R)-p-Mentha-1 (6) ,8-dien-2-one (CAS RN 6485-40-1) 0 % — 31.12.2030

0.8015 *ex 2914 29 00 35 4-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 0 % — 31.12.2030 95 % or more

0.7389 ex 2914 29 00 55 1-(Cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) with a purity by weight of more than 90 % 0 % — 31.12.2029 30/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8695 ex 2914 29 00 65 3-Methylcyclopent-2-enone (CAS RN 2758-18-1) with a purity by weight of 98 % or more 0 % — 31.12.2029

0.3480 ex 2914 29 00 75 Bornan-2-one (CAS RN 76-22-2) with a purity by weight of 90 % or more 0 % — 31.12.2029

0.6265 ex 2914 39 00 15 2,6-Dimethyl-1-indanone (CAS RN 66309-83-9) 0 % — 31.12.2029

0.6447 ex 2914 39 00 25 1,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7) 0 % — 31.12.2029

0.4227 ex 2914 39 00 30 Benzophenone (CAS RN 119-61-9) 0 % — 31.12.2027

0.4428 ex 2914 39 00 60 4-Methylbenzophenone (CAS RN 134-84-9) 0 % — 31.12.2029

0.5739 ex 2914 39 00 70 Benzil (CAS RN 134-81-6) 0 % — 31.12.2029

0.5535 ex 2914 39 00 80 4’-Methylacetophenone (CAS RN 122-00-9) 0 % — 31.12.2027

0.8288 ex 2914 40 90 10 Benzoin (CAS RN 119-53-9) with a purity by weight of 99 % or more 0 % — 31.12.2026

0.7824 ex 2914 50 00 15 1,1-Dimethoxyacetone (CAS RN 6342-56-9) with a purity by weight of 98 % or more 0 % — 31.12.2029

0.8168 ex 2914 50 00 18 4'-Hydroxyacetophenone (CAS RN 99-93-4) with a purity by weight of 99 % or more 0 % — 31.12.2026

0.8179 ex 2914 50 00 23 1-[2-(Oxiran-2-ylmethoxy)phenyl]-3-phenylpropan-1-one (CAS RN 22525-95-7) with 0 % — 31.12.2026 a purity by weight of 99 % or more

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 31/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5943 ex 2914 50 00 25 4'-Methoxyacetophenone (CAS RN 100-06-1) 0 % — 31.12.2029

0.8195 ex 2914 50 00 28 1,1'-{(2-Hydroxypropane-1,3-diyl)bis[oxy(6-hydroxybenzene-2,1-diyl)]} 0 % — 31.12.2026 diethanone (CAS RN 16150-44-0) with a purity by weight of 98 % or more

0.7797 ex 2914 50 00 35 2-Hydroxy-1-[4-[4-(2-hydroxy-2-methylpropanoyl)phenoxy]phenyl]-2-methylpropan-1-one 0 % — 31.12.2029 (CAS-RN 71868-15-0)

0.5435 ex 2914 50 00 40 4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2) 0 % — 31.12.2026

0.5809 ex 2914 50 00 45 3,4-Dihydroxybenzophenone (CAS RN 10425-11-3) 0 % — 31.12.2027

0.8922 *ex 2914 50 00 48 7-Hydroxy-3,4-dihydronaphthalen-1(2H)-one (CAS RN 22009-38-7) with a purity by weight 0 % — 31.12.2030 of 98 % or more

0.4235 ex 2914 50 00 60 2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8) 0 % — 31.12.2027

0.4385 ex 2914 50 00 80 2’,6’-Dihydroxyacetophenone (CAS RN 699-83-2) 0 % — 31.12.2029

0.2647 ex 2914 69 80 10 2-Ethylanthraquinone (CAS RN 84-51-5) 0 % — 31.12.2029

0.2643 ex 2914 69 80 30 1,4-Dihydroxyanthraquinone (CAS RN 81-64-1) 0 % — 31.12.2029

0.5430 ex 2914 69 80 40 p-Benzoquinone (CAS RN 106-51-4) 0 % — 31.12.2029

0.5782 ex 2914 79 00 20 2,4'-Difluorobenzophenone (CAS RN 342-25-6) 0 % — 31.12.2027 32/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7751 ex 2914 79 00 27 (2-Chloro-5-iodo-phenyl)-(4-fluoro-phenyl)-methanone (CAS RN 915095-86-2) 0 % — 31.12.2029

0.7467 ex 2914 79 00 30 5-Methoxy-1-[4-(trifluoromethyl)phenyl]pentan-1-one (CAS RN 61718-80-7) 0 % — 31.12.2029

0.8338 ex 2914 79 00 33 (4R)-4-(2-Fluorophenyl)-3,4-dihydro-2H-naphthalen-1-one (CAS RN 1234356-88-7) with 0 % — 31.12.2027 a purity by weight of 99 % or more

0.3474 ex 2914 79 00 40 Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8) 0 % — 31.12.2029

0.8563 ex 2914 79 00 43 5-Chloropentan-2-one (CAS RN 5891-21-4) with a purity by weight of 95 % or more 0 % — 31.12.2028

0.8591 ex 2914 79 00 48 2-Chloro-3',4'-dihydroxyacetophenone (CAS RN 99-40-1) with a purity by weight of 99 % or 0 % — 31.12.2028 more

0.2640 ex 2914 79 00 50 3’-Chloropropiophenone (CAS RN 34841-35-5) 0 % — 31.12.2029

0.4948 ex 2914 79 00 60 4’-tert-Butyl-2’,6’-dimethyl-3’,5’-dinitroacetophenone (CAS RN 81-14-1) 0 % — 31.12.2026

0.5237 ex 2914 79 00 70 4-Chloro-4’-hydroxybenzophenone (CAS RN 42019-78-3) 0 % — 31.12.2026

0.6120 ex 2914 79 00 80 Tetrachloro-p-benzoquinone (CAS RN 118-75-2) 0 % — 31.12.2029

0.7955 *ex 2915 24 00 10 Acetic anhydride (CAS RN 108-24-7) with a purity by weight of 94 % or more 0 % — 31.12.2030

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 33/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8543 ex 2915 39 00 15 4-(2,2-Dichlorocyclopropyl)phenylacetate (CAS RN 144900-34-5) with a purity by weight of 0 % — 31.12.2028 97 % or more

0.6155 ex 2915 39 00 25 2-Methylcyclohexyl acetate (CAS RN 5726-19-2) 0 % — 31.12.2029

0.5909 ex 2915 39 00 33 2-tert-Butylcyclohexyl acetate (CAS RN 88-41-5) with a purity by weight of 98 % or more, 0 % — 31.12.2029 containing by weight 80 % or more of cis-2-tert-butylcyclohexyl acetate (CAS RN 20298-69-5)

0.7433 ex 2915 39 00 35 Cis-3-hexenyl acetate (CAS RN 3681-71-8) with a purity by weight of 95 % or more 0 % — 31.12.2027

0.2957 ex 2915 39 00 40 tert-Butyl acetate (CAS RN 540-88-5) 0 % — 31.12.2029

0.7423 ex 2915 39 00 45 4-tert-Butylcyclohexyl acetate (CAS RN 32210-23-4) with a purity by weight of 95 % or more 0 % — 31.12.2027

0.5119 *ex 2915 39 00 55 Dodec-8-enyl acetate (CAS RN 28079-04-1) with a purity by weight of 90 % or more 0 % — 31.12.2030

0.5121 *ex 2915 39 00 65 Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4) 0 % — 31.12.2030

0.5289 ex 2915 39 00 75 Isobornyl acetate (CAS RN 125-12-2) 0 % — 31.12.2026

0.5301 ex 2915 39 00 80 1-Phenylethyl acetate (CAS RN 93-92-5) 0 % — 31.12.2026 34/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7834 ex 2915 40 00 10 Ethyl trichloroacetate (CAS RN 515-84-4) with a purity by weight of 98 % or more 0 % — 31.12.2029

0.5858 ex 2915 60 19 20 Ethyl butyrate (CAS RN 105-54-4) with a purity by weight of 95 % or more 0 % — 31.12.2027

0.7540 ex 2915 70 40 10 Methyl palmitate (CAS RN 112-39-0) 0 % — 31.12.2029

0.7541 *ex 2915 90 30 10 Methyl laurate (CAS RN 111-82-0) 0 % — 31.12.2030

0.8495 ex 2915 90 30 20 Chloromethyl dodecanoate (CAS RN 61413-67-0) with a purity by weight of 97 % or more 0 % — 31.12.2027

0.7407 ex 2915 90 90 20 Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5) 0 % — 31.12.2027

0.7542 ex 2915 90 90 25 Methyl octanoate (CAS RN 111-11-5), methyl decanoate (CAS RN 110-42-9) or methyl 0 % — 31.12.2029 myristate (CAS RN 124-10-7)

0.6003 ex 2915 90 90 27 Triethyl orthoformate (CAS RN 122-51-0) with a purity by weight of 99 % or more 0 % — 31.12.2029

0.5767 ex 2915 90 90 30 3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5) 0 % — 31.12.2027

0.8154 ex 2915 90 90 33 Ethyl 8-bromooctanoate (CAS RN 29823-21-0) with a purity by weight of 98 % or more 0 % — 31.12.2026

0.8423 ex 2915 90 90 43 Trifluoroacetic anhydride (CAS RN 407-25-0) with a purity by weight of 98 % or more 0 % — 31.12.2027

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 35/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6255 ex 2915 90 90 45 Trimethyl orthoformate (CAS RN 149-73-5) 0 % — 31.12.2029

0.8457 ex 2915 90 90 53 3-Chloro-2,2-dimethylpropanoyl chloride (CAS RN 4300-97-4) with a purity by weight of 0 % — 31.12.2027 98 % or more

0.4954 *ex 2915 90 90 60 Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0) 0 % — 31.12.2030

0.2585 ex 2916 12 00 10 2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl 0 % — 31.12.2029 acrylate (CAS RN 61167-58-6)

0.3466 *ex 2916 13 00 30 Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more 0 % — 31.12.2030 than 17 % by weight of manufacturing impurities

0.3468 ex 2916 13 00 40 Zinc Dimethacrylate (CAS RN 13189-00-9) in the form of powder with a purity by weight of 0 % — 31.12.2029 99 % or more, with not more than 1 % of a stabiliser

0.2638 ex 2916 14 00 10 2,3-Epoxypropyl methacrylate (CAS RN 106-91-2) 0 % — 31.12.2029

0.8863 ex 2916 14 00 40 Butyl methacrylate (CAS RN 97-88-1) with a purity by weight of 99 % or more 0 % — 31.12.2029

0.8953 *ex 2916 14 00 50 2-Hydroxyethyl methacrylate (CAS RN 868-77-9) with a purity by weight of 97 % or more 0 % — 31.12.2030

0.5991 ex 2916 19 95 40 Sorbic acid (CAS RN 110-44-1) for use in the manufacture of animal feeds(1) 0 % — 31.12.2029

0.6238 ex 2916 19 95 50 Methyl 2-fluoroacrylate (CAS RN 2343-89-7) 0 % — 31.12.2029 36/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7980 *ex 2916 19 95 60 Methyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, 0 % — 31.12.2030 whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2)

0.7940 *ex 2916 19 95 70 Methyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more 0 % — 31.12.2030

0.7023 ex 2916 20 00 15 Transfluthrin (ISO) (CAS RN 118712-89-3) 0 % — 31.12.2026

0.7931 *ex 2916 20 00 25 Cyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more 0 % — 31.12.2030

0.8336 ex 2916 20 00 55 Methyl 2,2-dimethyl-3-(2-methylprop-1-en-1-yl)cyclopropane-1-carboxylate 0 % — 31.12.2027 (CAS RN 5460-63-9) with a purity by weight of 90 % or more

0.4931 *ex 2916 20 00 60 3-Cyclohexylpropionic acid (CAS RN 701-97-3) 0 % — 31.12.2030

0.8352 ex 2916 20 00 65 Tefluthrin (ISO)(CAS RN 79538-32-2) with a purity by weight of 96 % or more 0 % — 31.12.2027

0.5421 ex 2916 31 00 10 Benzyl benzoate (CAS RN 120-51-4) 0 % — 31.12.2026

0.8214 ex 2916 31 00 20 Phenethyl benzoate (CAS RN 94-47-3) with a purity by weight of 95 % or more 0 % — 31.12.2026

0.6248 ex 2916 39 90 13 3,5-Dinitrobenzoic acid (CAS RN 99-34-3) 0 % — 31.12.2029

0.5214 ex 2916 39 90 15 2-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3) 0 % — 31.12.2026

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 37/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2636 ex 2916 39 90 20 3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6) 0 % — 31.12.2029

0.6557 ex 2916 39 90 23 (2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6) 0 % — 31.12.2029

0.4951 ex 2916 39 90 25 2-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8) 0 % — 31.12.2026

0.7827 ex 2916 39 90 27 Methyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or 0 % — 31.12.2029 more

0.4930 *ex 2916 39 90 30 2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1) 0 % — 31.12.2030

0.5944 ex 2916 39 90 35 Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9) 0 % — 31.12.2029

0.8489 ex 2916 39 90 40 Ethyl 4-bromo-3-(bromomethyl)benzoate (CAS RN 347852-72-6) with a purity by weight of 0 % — 31.12.2027 97 % or more

0.7734 ex 2916 39 90 43 2-(3,5-Bis(trifluoromethyl)phenyl)-2-methylpropanoic acid (CAS RN 289686-70-0) 0 % — 31.12.2029

0.2634 ex 2916 39 90 50 3,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1) 0 % — 31.12.2029

0.4238 ex 2916 39 90 55 4-tert-Butylbenzoic acid (CAS RN 98-73-7) 0 % — 31.12.2027

0.3462 *ex 2916 39 90 58 Ibuprofen (INN) (CAS RN 15687-27-1) with a purity by weight of 99 % or more 0 % — 31.12.2029

0.8169 ex 2916 39 90 63 2-Phenylbutyric acid (CAS RN 90-27-7) with a purity by weight of 99 % or more 0 % — 31.12.2026 38/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8369 ex 2916 39 90 67 Nitrobenzoic acid (CAS RN 62-23-7) with a purity by weight of 99 % or more 0 % — 31.12.2027

0.7117 ex 2916 39 90 73 (2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5) 0 % — 31.12.2026

0.5541 ex 2916 39 90 75 m-Toluic acid (CAS RN 99-04-7) 0 % — 31.12.2027

0.5543 ex 2916 39 90 85 (2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0) 0 % — 31.12.2027

0.3457 ex 2917 11 00 20 Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1) 0 % — 31.12.2029

0.4746 ex 2917 11 00 30 Cobalt oxalate (CAS RN 814-89-1) 0 % — 31.12.2029

0.8946 *ex 2917 12 00 30 Bis(3,4-epoxycyclohexylmethyl)adipate (CAS RN 3130-19-6) with a purity by weight of 97 % 0 % — 31.12.2030 or more

0.4684 ex 2917 19 10 10 Dimethyl malonate (CAS RN 108-59-8) 0 % — 31.12.2029

0.5602 ex 2917 19 10 20 Diethyl malonate (CAS RN 105-53-3) 0 % — 31.12.2027

0.7451 ex 2917 19 80 35 Diethyl methylmalonate (CAS RN 609-08-5) 0 % — 31.12.2029

0.7880 ex 2917 19 80 45 Iron fumarate (CAS RN 141-01-5) with a purity by weight of 93 % or more 0 % — 31.12.2029

0.4918 *ex 2917 19 80 50 Tetradecanedioic acid (CAS RN 821-38-5) 0 % — 31.12.2030

0.8302 *ex 2917 19 80 55 Maleic acid (CAS RN 110-16-7) with a purity by weight of 99 % or more 0 % — 31.12.2030

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 39/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8530 ex 2917 19 80 60 Oxalyl dichloride (CAS RN 79-37-8) with a purity by weight of 99 % or more 0 % — 31.12.2028

0.8728 ex 2917 19 80 65 20-tert-butoxy-20-oxoicosanoic acid (CAS RN 683239-16-9) with a purity by weight of 98 % 0 % — 31.12.2029 or more

0.3454 ex 2917 19 80 70 Itaconic acid (CAS RN 97-65-4) 0 % — 31.12.2029

0.4790 ex 2917 19 80 75 Ethylene brassylate (CAS RN 105-95-3) with a purity by weight of 97 % or more 0 % — 31.12.2029

0.8534 ex 2917 19 80 80 Ethyl chloroglyoxylate (CAS RN 4755-77-5) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.8945 *ex 2917 19 80 85 Dibutyl itaconate (CAS RN 2155-60-4) with a purity by weight of 96 % or more 0 % — 31.12.2030

0.2631 ex 2917 20 00 30 1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride 0 % — 31.12.2029 (CAS RN 115-27-5)

0.2627 ex 2917 20 00 40 3-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6) 0 % — 31.12.2029

0.2954 ex 2917 34 00 10 Diallyl phthalate (CAS RN 131-17-9) 0 % — 31.12.2029

0.4945 *ex 2917 39 85 20 Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0) 0 % — 31.12.2030

0.6796 *ex 2917 39 85 25 Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5) 0 % — 31.12.2030

0.3640 *ex 2917 39 85 30 Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7) 0 % — 31.12.2030 40/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8255 ex 2917 39 85 45 3-(4-Chlorophenyl)glutaric acid (CAS RN 35271-74-0) with a purity by weight of 98 % or 0 % — 31.12.2026 more

0.6553 ex 2917 39 85 50 1,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4) 0 % — 31.12.2029

0.8526 ex 2917 39 85 55 3-Nitrophthalic acid (CAS RN 603-11-2) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.6554 ex 2917 39 85 60 Perylene-3,4:9,10-tetracarboxylic dianhydride(CAS RN 128-69-8) 0 % — 31.12.2029

0.6366 ex 2918 19 30 10 Cholic acid (CAS RN 81-25-4) 0 % — 31.12.2029

0.6367 ex 2918 19 30 20 3-α,12-α-Dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid) (CAS RN 83-44-3) 0 % — 31.12.2029

0.2950 ex 2918 19 98 20 L-Malic acid (CAS RN 97-67-6) 0 % — 31.12.2029

0.8509 ex 2918 19 98 25 (S)-2-Hydroxy-2-phenylacetic acid (CAS RN 17199-29-0) with a purity by weight of 99 % or 0 % — 31.12.2027 more

0.7702 ex 2918 19 98 30 Ethyl 1-hydroxycyclopentanecarboxylate (CAS RN 41248-23-1) 0 % — 31.12.2029

0.7907 ex 2918 19 98 50 12-Hydroxyoctadecanoic acid (CAS RN 106-14-9) with a purity by weight of 90 % or more 0 % — 31.12.2029 for use in the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters(1)

0.8044 *ex 2918 19 98 60 (R)-tert-Butyl 2'-(1-hydroxyethyl)-3-methyl-[1,1'-biphenyl]-4-carboxylate 0 % — 31.12.2030 (CAS RN 1246560-92-8) with a purity by weight of 98 % or more

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 41/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8422 ex 2918 19 98 70 Rac-tert-butyl 3-hydroxy-4-pentenoate (CAS RN 122763-67-1) with a purity by weight of 0 % — 31.12.2027 98 % or more

0.5781 ex 2918 29 00 35 Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9) 0 % — 31.12.2027

0.8917 *ex 2918 29 00 45 3-Hydroxy-2-naphthoic acid (CAS RN 92-70-6) with a purity by weight of 98 % or more 0 % — 31.12.2030

0.3638 ex 2918 29 00 50 Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2) 0 % — 31.12.2029

0.5220 ex 2918 29 00 60 Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium 0 % — 31.12.2026 salts (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3)

0.6456 ex 2918 29 00 70 3,5-Diiodosalicylic acid (CAS RN 133-91-5) 0 % — 31.12.2029

0.4427 ex 2918 30 00 30 Methyl-2-benzoylbenzoate (CAS RN 606-28-0) 0 % — 31.12.2029

0.7864 ex 2918 30 00 35 3-Oxocyclobutane-1-carboxylic acid with a purity by weight of 98 % or more 0 % — 31.12.2029 (CAS RN 23761-23-1)

0.8861 ex 2918 30 00 43 Ethyl 4-oxovalerate (CAS RN 539-88-8) with a purity by weight of 98 % or more 0 % — 31.12.2029

0.8949 *ex 2918 30 00 48 Prohexadione-calcium (ISOM) (CAS RN 127277-53-6) with a purity by weight of 95 % or 0 % — 31.12.2030 more 42/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8950 *ex 2918 30 00 53 2-(4-Chlorobenzoyl)benzoic acid (CAS RN 85-56-3) with a purity by weight of 99 % or more 0 % — 31.12.2030

0.8256 ex 2918 30 00 55 Methyl 3-oxo-pentanoate (CAS RN 30414-53-0) with a purity by weight of 98 % or more 0 % — 31.12.2026

0.6250 ex 2918 30 00 60 4-Oxovaleric acid (CAS RN 123-76-2) 0 % — 31.12.2029

0.6455 ex 2918 30 00 70 2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1) 0 % — 31.12.2029

0.8342 ex 2918 30 00 75 Methyl 2-((1S,2R)-3-oxo-2-pentylcyclopentyl)acetate (CAS RN 151716-35-7) with a purity by 0 % — 31.12.2027 weight of 99 % or more

0.7062 ex 2918 30 00 80 Methyl benzoylformate (CAS RN 15206-55-0) 0 % — 31.12.2026

0.7344 ex 2918 30 00 85 2-Fluoro-5-formylbenzoic acid (CAS RN 550363-85-4) with a purity by weight of 98 % or 0 % — 31.12.2029 more

0.5857 ex 2918 30 00 87 Ethyl acetoacetate (CAS RN 141-97-9) with a purity by weight of 98 % or more 0 % — 31.12.2027

0.6814 *ex 2918 99 90 13 3-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0) 0 % — 31.12.2030

0.5856 ex 2918 99 90 15 Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8) 0 % — 31.12.2027

0.6901 *ex 2918 99 90 18 Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9) 0 % — 31.12.2030

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 43/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6147 ex 2918 99 90 25 Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0) 0 % — 31.12.2029

0.7256 ex 2918 99 90 27 Ethyl 3-ethoxypropionate (CAS RN 763-69-9) 0 % — 31.12.2027

0.6342 ex 2918 99 90 35 p-Anisic acid (CAS RN 100-09-4) 0 % — 31.12.2029

0.7358 ex 2918 99 90 38 Diclofop-methyl (ISO) (CAS RN 51338-27-3) 0 % — 31.12.2027

0.2945 ex 2918 99 90 40 trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6) 0 % — 31.12.2029

0.6224 ex 2918 99 90 45 4-Methylcatechol dimethyl acetate (CAS RN 52589-39-6) 0 % — 31.12.2029

0.8066 *ex 2918 99 90 48 2-Bromo-5-methoxybenzoic acid (CAS RN 22921-68-2) with a purity by weight of 98 % or 0 % — 31.12.2026 more

0.2947 ex 2918 99 90 50 Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0) 0 % — 31.12.2029

0.8623 ex 2918 99 90 58 2,4-D (ISO) (CAS RN 94-75-7) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.2943 ex 2918 99 90 60 3,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2) 0 % — 31.12.2029

0.4742 ex 2918 99 90 67 Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8) with a purity by weight of 95 % or more 0 % — 31.12.2029

0.2948 ex 2918 99 90 73 Methyl (2R)-2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2) with a purity by weight 0 % — 31.12.2029 of 97 % or more 44/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8947 *ex 2918 99 90 78 3,4-Epoxycyclohexylmethyl-3',4'-epoxycyclohexane carboxylate (CAS RN 2386-87-0) with 0 % — 31.12.2030 a purity by weight of 91 % or more

0.6747 *ex 2918 99 90 85 Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more 0 % — 31.12.2030

0.5495 ex 2919 90 00 50 Triethyl phosphate (CAS RN 78-40-0) 0 % — 31.12.2026

0.6188 ex 2919 90 00 60 Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5) 0 % — 31.12.2029

0.6413 ex 2919 90 00 70 Tris(2-butoxyethyl)phosphate (CAS RN 78-51-3) 0 % — 31.12.2029

0.6253 ex 2920 19 00 30 2,2‘-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2‘-disulphide (CAS RN 4090-51-1) 0 % — 31.12.2029

0.3634 2920 23 00 Trimethyl phosphite (CAS RN 121-45-9) 0 % — 31.12.2029

0.4158 2920 24 00 Triethyl phosphite (CAS RN 122-52-1) 0 % — 31.12.2026

0.2626 ex 2920 29 00 10 O,O’-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806-34-6) 0 % — 31.12.2029

0.5038 *ex 2920 29 00 20 Tris(methylphenyl)phosphite (CAS RN 25586-42-9) 0 % — 31.12.2030

0.6004 ex 2920 29 00 25 Fosetyl-aluminium (ISOM)(CAS RN 39148-24-8) with a purity by weight of 96 % or more 0 % — 31.12.2029

0.5045 *ex 2920 29 00 40 Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8) 0 % — 31.12.2030

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 45/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8942 *ex 2920 29 00 45 Tris(2-chloroethyl) phosphite (CAS RN 140-08-9) with a purity by weight of 90 % or more 0 % — 31.12.2030

0.7898 ex 2920 29 00 80 2,4,8,10-Tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H dibenzo[d,g][1,3,2] 0 % — 31.12.2029 dioxaphosphocin (CAS RN 126050-54-2) with a purity by weight of 95 % or more

0.8522 ex 2920 90 10 13 Tetraethyl orthocarbonate (CAS RN 78-09-1) with a purity by weight of 99 % or more 0 % — 31.12.2028

0.2605 ex 2920 90 10 20 Diallyl 2,2’-oxydiethyl dicarbonate (CAS RN 142-22-3) 0 % — 31.12.2029

0.8641 *ex 2920 90 10 23 1,3,2-Dioxathiolane 2,2-dioxide (CAS RN 1072-53-3) with a purity by weight of 99 % or 3,2 % — 31.12.2026 more

0.7559 *ex 2920 90 10 33 Ethyl methyl carbonate (CAS RN 623-53-0) with a purity by weight of 98 % or more 3,2 % — 31.12.2026

0.3685 ex 2920 90 10 40 Dimethyl carbonate (CAS RN 616-38-6) 0 % — 31.12.2029

0.8297 *ex 2920 90 10 45 Ethylene carbonate (CAS RN 96-49-1) with a purity by weight of 99 % or more 3,2 % — 31.12.2026

0.3868 ex 2920 90 10 50 Di-tert-butyl dicarbonate (CAS RN 24424-99-5) 0 % — 31.12.2029

0.8298 *ex 2920 90 10 55 Vinylene carbonate (CAS RN 872-36-6) with a purity by weight of 99,9 % or more 3,2 % — 31.12.2026 46/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8299 *ex 2920 90 10 65 Vinyl ethylene carbonate (CAS RN 4427-96-7) with a purity by weight of 99 % or more 3,2 % — 31.12.2026

0.8511 *ex 2920 90 10 85 Diethyl carbonate (CAS RN 105-58-8) with a purity by weight of 99,9 % or more 3,2 % — 31.12.2026

0.8542 ex 2920 90 70 10 Tris(2-propylheptyl) borate (CAS RN 1488321-95-4) with a purity by weight of 90 % or more 0 % — 31.12.2028

0.7588 ex 2920 90 70 20 Diethyl phosphorochloridate (CAS RN 814-49-3) 0 % — 31.12.2029

0.8719 ex 2920 90 70 35 Triisopropyl borate (CAS RN 5419-55-6) with a purity by weight of 99 % or more 0 % — 31.12.2029

0.5947 ex 2920 90 70 60 Bis(neopentylglycolato)diboron (CAS RN 201733-56-4) 0 % — 31.12.2029

0.8490 ex 2920 90 70 70 4,4,5,5-Tetramethyl-1,3,2-dioxaborolane (CAS RN 25015-63-8) with a purity by weight of 0 % — 31.12.2027 97 % or more, containing not more than 1 % of the stabiliser triethylamine (CAS RN 121-44-8)

0.6598 *ex 2920 90 70 80 Bis(pinacolato)diboron (CAS RN 73183-34-3) 0 % — 31.12.2030

0.3629 ex 2921 19 99 20 Ethyl(2-methylallyl)amine (CAS RN 18328-90-0) 0 % — 31.12.2029

0.3631 ex 2921 19 99 30 Allylamine (CAS RN 107-11-9) 0 % — 31.12.2029

0.8477 ex 2921 19 99 35 N-Ethyl-N-isopropylpropan-2-amine 2-(difluoromethoxy)acetate with a purity by weight of 0 % — 31.12.2027 98 % or more

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 47/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7073 ex 2921 19 99 45 2-Chloro-N-(2-chloroethyl)ethanamine hydrochloride (CAS RN 821-48-7) 0 % — 31.12.2026

0.8562 ex 2921 19 99 55 2,2,2-Trifluoroethylamine hydrochloride (CAS RN 373-88-6) with a purity by weight of 99 % 0 % — 31.12.2028 or more

0.6269 ex 2921 19 99 80 Taurine (CAS RN 107-35-7), with 0,5 % addition of anti-caking agent silicon dioxide 0 % — 31.12.2029 (CAS RN 112926-00-8)

0.3630 ex 2921 29 00 20 Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0) 0 % — 31.12.2029

0.3625 ex 2921 29 00 30 Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855-32-1) 0 % — 31.12.2029

0.8170 ex 2921 29 00 35 Pentamethylenediamine (CAS RN 462-94-2) with a purity by weight of 99 % or more, also as 0 % — 31.12.2026 an aqueous solution containing by weight more than 50 % of pentamethylenediamine

0.4917 *ex 2921 29 00 40 Decamethylenediamine (CAS RN 646-25-3) 0 % — 31.12.2030

0.5256 ex 2921 29 00 50 N’-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine (CAS RN 6711-48-4) 0 % — 31.12.2026

0.7947 *ex 2921 29 00 70 N,N,N',N'-Tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or 0 % — 31.12.2030 more

0.5768 ex 2921 30 99 40 Cyclopropylamine (CAS RN 765-30-0) 0 % — 31.12.2027

0.8529 ex 2921 30 99 60 Amantadine hydrochloride (CAS RN 665-66-7) with a purity by weight of 97 % or more 0 % — 31.12.2028 48/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3909 ex 2921 42 00 25 Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5) 0 % — 31.12.2029

0.3978 ex 2921 42 00 35 2-Nitroaniline (CAS RN 88-74-4) 0 % — 31.12.2029

0.2620 ex 2921 42 00 50 3-Aminobenzenesulfonic acid (CAS RN 121-47-1) 0 % — 31.12.2029

0.7739 *ex 2921 42 00 65 4-chloroaniline (CAS RN 106-47-8) with a purity by weight of 99 % or more 0 % — 31.12.2029

0.3623 ex 2921 42 00 70 2-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2) 0 % — 31.12.2029

0.3622 ex 2921 42 00 80 4-Chloro-2-nitroaniline (CAS RN 89-63-4) 0 % — 31.12.2029

0.5616 ex 2921 42 00 86 2,5-Dichloroaniline (CAS RN 95-82-9) 0 % — 31.12.2027

0.5603 ex 2921 42 00 87 N-Methylaniline (CAS RN 100-61-8) 0 % — 31.12.2027

0.5617 ex 2921 42 00 88 3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0) 0 % — 31.12.2027

0.8433 ex 2921 43 00 25 6-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6) with a purity by weight of 98 % or 0 % — 31.12.2027 more

0.8568 ex 2921 43 00 35 3-Chloro-o-toluidine (CAS RN 87-60-5) with a purity by weight of 95 % or more 0 % — 31.12.2028

0.3980 ex 2921 43 00 40 4-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8) 0 % — 31.12.2029

0.5124 *ex 2921 43 00 60 3-Aminobenzotrifluoride (CAS RN 98-16-8) 0 % — 31.12.2030

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 49/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3621 ex 2921 44 00 20 Diphenylamine (CAS RN 122-39-4) 0 % — 31.12.2029

0.7316 ex 2921 45 00 60 1-Naphthylamine (CAS RN 134-32-7) 0 % — 31.12.2027

0.7592 ex 2921 49 00 35 2-Ethylaniline (CAS RN 578-54-1) 0 % — 31.12.2029

0.2609 ex 2921 49 00 40 N-1-Naphthylaniline (CAS RN 90-30-2) 0 % — 31.12.2029

0.8019 *ex 2921 49 00 45 2-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight 0 % — 31.12.2030 of 95 % or more

0.8020 *ex 2921 49 00 55 2-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight 0 % — 31.12.2030 of 95 % or more

0.6825 *ex 2921 49 00 60 2,6-Diisopropylaniline (CAS RN 24544-04-5) 0 % — 31.12.2030

0.8059 *ex 2921 49 00 65 Bis-(9,9-dimethylfluoren-2-yl)amine (CAS RN 500717-23-7) with a purity by weight of 95 % 0 % — 31.12.2030 or more

0.8558 ex 2921 49 00 75 N-Methyl-1-(1-napthyl)methanamine (CAS RN 14489-75-9) with a purity by weight of 99 % 0 % — 31.12.2028 or more

0.3981 ex 2921 51 19 30 2-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9) 0 % — 31.12.2029

0.4184 ex 2921 51 19 40 p-Phenylenediamine (CAS RN 106-50-3) 0 % — 31.12.2026

0.4498 ex 2921 51 19 50 2-Chloro-1,4-phenylendiamine (CAS RN 615-66-7) or 2,5-dichloro-1,4-phenylendiamine 0 % — 31.12.2029 (CAS RN 20103-09-7) 50/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2612 ex 2921 59 90 15 Mixture of isomers of 3,5-diethyltoluenediamine (CAS RN 68479-98-1) 0 % — 31.12.2028

0.3785 ex 2921 59 90 30 3,3’-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9) 0 % — 31.12.2027

0.3870 ex 2921 59 90 40 4,4’-Diaminostilbene-2,2’-disulphonic acid (CAS RN 81-11-8) 0 % — 31.12.2029

0.7860 ex 2922 19 00 15 Aqueous solution, containing by weight: 0 % — 31.12.2029 — 73 % or more 2-amino-2-methyl-1-propanol (CAS RN 124-68-5), — 4,5 % or more, but not more than 27 % water (CAS RN 7732-18-5)

0.5757 ex 2922 19 00 20 2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9) 0 % — 31.12.2027

0.7946 *ex 2922 19 00 29 N-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 0 % — 31.12.2030 99 % or more

0.3617 ex 2922 19 00 30 N,N,N’,N’-Tetramethyl-2,2’-oxybis(ethylamine) (CAS RN 3033-62-3) 0 % — 31.12.2029

0.8337 ex 2922 19 00 33 2-Methoxyethan-1-amine (CAS RN 109-85-3) with a purity by weight of 98 % or more 0 % — 31.12.2027

0.7179 ex 2922 19 00 40 (R)-1-((4-Amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 0 % — 31.12.2026 4-methylbenzenesulphonate (CAS RN 1294504-64-5)

0.6947 *ex 2922 19 00 43 2-[2-(Dimethylamino)ethoxy]ethanol (CAS RN 1704-62-7) with a purity by weight of 98 % or 0 % — 31.12.2030 more

0.7480 ex 2922 19 00 45 2-Methoxymethyl-p-phenylenediamine (CAS RN 337906-36-2) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 51/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3616 ex 2922 19 00 53 2-(2-Methoxyphenoxy)ethanamine (CAS RN 1836-62-0) with a purity by weight of 98 % or 0 % — 31.12.2029 more

0.7587 ex 2922 19 00 55 3-Aminoadamantan-1-ol (CAS RN 702-82-9) 0 % — 31.12.2029

0.3871 ex 2922 19 00 60 N,N,N’-Trimethyl-N’-(2-hydroxy-ethyl) 2,2’-oxybis(ethylamine), (CAS RN 83016-70-0) 0 % — 31.12.2029

0.5905 ex 2922 19 00 65 trans-4-Aminocyclohexanol (CAS RN 27489-62-9) 0 % — 31.12.2029

0.7935 *ex 2922 19 00 70 2-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more 0 % — 31.12.2030

0.5986 ex 2922 19 00 75 2-Ethoxyethylamine (CAS RN 110-76-9) 0 % — 31.12.2029

0.4665 ex 2922 19 00 80 N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine 0 % — 31.12.2029 (CAS RN 189253-72-3)

0.5996 ex 2922 21 00 10 2-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2) 0 % — 31.12.2029

0.2703 ex 2922 21 00 30 6-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7) 0 % — 31.12.2029

0.2704 ex 2922 21 00 40 7-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5) 0 % — 31.12.2029

0.3873 ex 2922 21 00 50 Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate (CAS RN 5460-09-3) 0 % — 31.12.2029 52/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5997 ex 2922 21 00 60 4-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or 0 % — 31.12.2029 more (CAS RN 90-20-0)

0.8564 ex 2922 29 00 13 2-(4-Chlorophenoxy)-5-(trifluoromethyl)aniline (CAS RN 349-20-2) with a purity by weight 0 % — 31.12.2028 of 98 % or more

0.8832 ex 2922 29 00 18 Bis[(4-Methoxyphenyl)methyl]amine (CAS RN 17061-62-0) with a purity by weight of 96 % 0 % — 31.12.2029 or more

0.2702 ex 2922 29 00 20 3-Aminophenol (CAS RN 591-27-5) 0 % — 31.12.2029

0.3982 ex 2922 29 00 25 5-Amino-o-cresol (CAS RN 2835-95-2) 0 % — 31.12.2029

0.6624 *ex 2922 29 00 30 1,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4) 0 % — 31.12.2030

0.7642 ex 2922 29 00 33 o-Phenetidine (CAS RN 94-70-2) 0 % — 31.12.2029

0.8934 *ex 2922 29 00 38 4-Amino-2,3-dichlorophenol (CAS RN 39183-17-0) with a purity by weight of 98 % or more 0 % — 31.12.2030

0.4627 ex 2922 29 00 65 4-Trifluoromethoxyaniline (CAS RN 461-82-5) 0 % — 31.12.2029

0.7481 ex 2922 29 00 67 4-Chloro-2,5-dimethoxyaniline (CAS RN 6358-64-1) 0 % — 31.12.2029

0.2692 ex 2922 29 00 70 4-Nitro-o-anisidine (CAS RN 97-52-9) 0 % — 31.12.2029

0.7026 ex 2922 29 00 73 Tris(4-aminophenyl) thiophosphate (CAS RN 52664-35-4) 0 % — 31.12.2026

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 53/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4956 *ex 2922 29 00 75 4-(2-Aminoethyl)phenol (CAS RN 51-67-2) 0 % — 31.12.2030

0.2696 ex 2922 29 00 80 3-Diethylaminophenol (CAS RN 91-68-9) 0 % — 31.12.2029

0.4914 *ex 2922 39 00 20 2-Amino-5-chlorobenzophenone (CAS RN 719-59-5) 0 % — 31.12.2030

0.7713 ex 2922 39 00 30 (2-Fluorophenyl)-[2-(methylamino)-5-nitrophenyl]methanone (CAS RN 735-06-8) 0 % — 31.12.2029

0.6761 *ex 2922 39 00 35 5-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5) 0 % — 31.12.2030

0.7371 ex 2922 39 00 45 2-Amino-3,5-dibromobenzaldehyde (CAS RN 50910-55-9) with a purity by weight of 98 % 0 % — 31.12.2029 or more

0.3546 ex 2922 43 00 10 Anthranilic acid (CAS RN 118-92-3) 0 % — 31.12.2029

0.3547 ex 2922 49 85 10 Ornithine aspartate (INNM) (CAS RN 3230-94-2) 0 % — 31.12.2029

0.5037 *ex 2922 49 85 17 Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not 0 % — 31.12.2030 more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)

0.5619 ex 2922 49 85 20 3-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0) 0 % — 31.12.2027

0.8162 ex 2922 49 85 23 2-Ethylhexyl 4-aminobenzoate (CAS RN 26218-04-2) with a purity by weight of 99 % or 0 % — 31.12.2026 more

0.6340 ex 2922 49 85 25 Dimethyl 2-aminobenzene-1,4-dicarboxylate (CAS RN 5372-81-6) 0 % — 31.12.2029 54/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8948 *ex 2922 49 85 28 Magnesium diglycinate (CAS RN 14783-68-7) with a purity by weight of 99 % or more 0 % — 31.12.2030

0.8234 ex 2922 49 85 33 4-Amino-2-chlorobenzoic acid (CAS RN 2457-76-3) with a purity by weight of 98 % or more 0 % — 31.12.2026

0.3544 ex 2922 49 85 40 Norvaline (CAS RN 6600-40-4) 0 % — 31.12.2029

0.8236 ex 2922 49 85 43 (E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CAS RN 1690340-79-4) with a purity by 0 % — 31.12.2026 weight of 98 % or more

0.3983 ex 2922 49 85 50 D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9) 0 % — 31.12.2029

0.8340 ex 2922 49 85 53 (S)-ethyl 3-amino-3-phenylpropanoate hemi((2R,3R)-2,3-dihydroxysuccinate) with a purity by 0 % — 31.12.2027 weight of 98 % or more

0.4239 ex 2922 49 85 60 Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3) 0 % — 31.12.2027

0.8726 ex 2922 49 85 63 Glycine hydrochloride (CAS RN 6000-43-7) with a purity by weight of 95 % or more, 0 % — 31.12.2029 whether or not containing not more than 5 % of anti-caking agent silicon dioxide (CAS RN 112926-00-8), used to produce food flavourings(1)

0.7254 ex 2922 49 85 75 L-alanine isopropyl ester hydrochloride (CAS RN 62062-65-1) 0 % — 31.12.2029

0.7020 ex 2922 50 00 10 2-(2-(2-Aminoethoxy)ethoxy)acetic acid hydrochloride (CAS RN 134979-01-4) 0 % — 31.12.2026

0.7257 ex 2922 50 00 15 3,5-Diiodothyronine (CAS RN 1041-01-6) 0 % — 31.12.2027

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 55/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4702 ex 2922 50 00 20 1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride (CAS RN 130198-05-9) 0 % — 31.12.2029

0.8445 ex 2922 50 00 25 L-Threonine (CAS RN 72-19-5) 0 % — 31.12.2027

0.8473 ex 2922 50 00 45 (S)-2-Amino-2-(3-fluoro-5-methoxyphenyl)ethanol hydrochloride (CAS RN 2095692-22-9) 0 % — 31.12.2027 with a purity by weight of 98 % or more

0.8364 ex 2922 50 00 55 1-{[4-(Benzyloxy)phenyl]-2-(dimethylamino)ethyl}cyclohexanol (CAS RN 93413-61-7) with 0 % — 31.12.2027 a purity by weight of 98 % or more

0.8325 ex 2922 50 00 65 [4-[2-(Dimethylamino)ethoxy]phenyl](4-hydroxyphenyl)methanone (CAS RN 173163-13-8) 0 % — 31.12.2027 with a purity by weight of 98 % or more

0.3543 ex 2923 90 00 10 Tetramethylammonium hydroxide (CAS RN 75-59-2), in the form of an aqueous solution 0 % — 31.12.2029 containing 25 % (± 0,5 %) by weight of tetramethylammonium hydroxide

0.8715 ex 2923 90 00 13 Bis(N,N,N-trimethyladamantan-1-aminium) sulfate (CAS RN 1000777-61-6) with a purity by 0 % — 31.12.2029 weight of 95 % or more, whether or not in aqueous solution containing 20 % or more Bis(N, N,N-trimethyladamantan-1-aminium) sulfate (CAS RN 1000777-61-6)

0.8159 ex 2923 90 00 30 Tetrabutylammonium tetrahydroborate (CAS RN 33725-74-5) with a purity by weight of 0 % — 31.12.2026 97 % or more

0.8931 *ex 2923 90 00 33 Calcium phosphoryl choline chloride tetrahydrate (CAS RN 72556-74-2) with a purity by 0 % — 31.12.2030 weight of 90 % or more 56/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7879 ex 2923 90 00 50 Betaine hydrochloride (CAS RN 590-46-5), with a purity by weight of 93 % or more 0 % — 31.12.2029

0.7089 ex 2923 90 00 55 Tetrabutylammonium bromide (CAS RN 1643-19-2) 0 % — 31.12.2026

0.7615 ex 2923 90 00 65 N,N,N-Trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide (CAS RN 53075-09-5) in 0 % — 31.12.2029 form of an aqueous solution with a content of N,N,N-trimethyl-tricyclo[3.3.1.13,7] decan-1-aminium hydroxide by weight of 17,5 % or more but not more than 27,5 %

0.5063 *ex 2923 90 00 75 Tetraethylammonium hydroxide, in the form of an aqueous solution containing: 0 % — 31.12.2030 — 35 % (± 0,5 %) by weight of tetraethylammonium hydroxide, — not more than 1 000 mg/kg of chloride, — not more than 2 mg/kg of iron, and — not more than 10 mg/kg of potassium

0.3536 ex 2923 90 00 80 Diallyldimethylammonium chloride (CAS RN 7398-69-8) , in the form of an aqueous solution 0 % — 31.12.2029 containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride

0.6410 ex 2923 90 00 85 N,N,N-Trimethylanilinium chloride (CAS RN 138-24-9) 0 % — 31.12.2029

0.2678 ex 2924 19 00 10 2-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt 0 % — 31.12.2029 (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 57/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8561 ex 2924 19 00 13 N-(tert-Butoxycarbonyl)glycine (CAS RN 4530-20-5) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.8000 *ex 2924 19 00 18 2-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 0 % — 31.12.2030 97 % or more

0.8705 ex 2924 19 00 20 Tert-butyl N-methyl-N-(2-oxopropyl)carbamate (CAS RN 532410-39-2) with a purity by 0 % — 31.12.2029 weight of 90 % or more

0.4380 ex 2924 19 00 25 Methylcarbamate (CAS RN 598-55-0) with a purity by weight of 98 % or more 0 % — 31.12.2029

0.8027 *ex 2924 19 00 28 (2S)-2-Amino-5-(carbamoylamino)pentanoic acid; 2-hydroxybutanedioic acid (2:1) 0 % — 31.12.2030 (CAS RN 54940-97-5) with a purity by weight of 98 % or more

0.6549 ex 2924 19 00 35 Acetamide (CAS RN 60-35-5) 0 % — 31.12.2029

0.8041 *ex 2924 19 00 38 Diethyl acetamidomalonate (CAS RN 1068-90-2) with a purity by weight of 98 % or more 0 % — 31.12.2026

0.8283 ex 2924 19 00 48 N,N-Dimethylcarbamoyl chloride (CAS RN 79-44-7) with a purity by weight of 99 % or more 0 % — 31.12.2026

0.8429 ex 2924 19 00 53 Aqueous solution of propamocarb hydrochloride (ISOM)(CAS RN 25606-41-1), containing 0 % — 31.12.2027 by weight 64 % or more, but not more than 68 % of propamocarb hydrochloride

0.7060 ex 2924 19 00 55 2-Propynyl butylcarbamate (CAS RN 76114-73-3) 0 % — 31.12.2026 58/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4160 ex 2924 19 00 60 N,N-Dimethylacrylamide (CAS RN 2680-03-7) 0 % — 31.12.2026

0.5605 ex 2924 19 00 80 Tetrabutylurea (CAS RN 4559-86-8) 0 % — 31.12.2027

0.6266 ex 2924 29 70 17 2-(Trifluoromethyl)benzamide (CAS RN 360-64-5) 0 % — 31.12.2029

0.6568 ex 2924 29 70 23 Benalaxyl-M (ISO) (CAS RN 98243-83-5) 0 % — 31.12.2029

0.8153 ex 2924 29 70 25 2-[2-(Methoxycarbonyl-phenyl-amino)-phenyl]-acetic acid (CAS RN 353497-35-5) with 0 % — 31.12.2026 a purity by weight of 98 % or more

0.7118 ex 2924 29 70 30 Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8) 0 % — 31.12.2026

0.8235 ex 2924 29 70 32 N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7) with a purity by weight 0 % — 31.12.2026 of 98 % or more

0.8621 ex 2924 29 70 34 Acetic acid—tert-butyl [(1-aminocyclohexyl)methyl]carbamate (1/1) with a purity by weight 0 % — 31.12.2028 of 98 % or more

0.8161 ex 2924 29 70 35 N-(1,1-Dimethylethyl)-4-amino-benzamide (CAS RN 93483-71-7) with a purity by weight of 0 % — 31.12.2026 99 % or more

0.8258 ex 2924 29 70 36 N,N'-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 41131-65-1) with 0 % — 31.12.2026 a purity by weight of 97 % or more

0.6110 ex 2924 29 70 37 Beflubutamid (ISO) (CAS RN 113614-08-7) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 59/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8595 ex 2924 29 70 38 2-Methyl-2-propanyl{(2S,3R)-3-hydroxy-4-[(2-methylpropyl)amino]-1-phenyl-2- butanyl} 0 % — 31.12.2028 carbamate (CAS RN 160232-08-6) with a purity by weight of 97 % or more

0.8696 ex 2924 29 70 39 N-[(9H-Fluoren-9-ylmethoxy)carbonyl]glycine (CAS RN 29022-11-5) with a purity by weight 0 % — 31.12.2029 of 99 % or more

0.5066 *ex 2924 29 70 40 N,N’-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5) 0 % — 31.12.2030

0.8697 ex 2924 29 70 41 (2S)-6-amino-2-({[(9H-fluoren-9-yl)methoxy]carbonyl}amino)hexanoic acid hydrochloride 0 % — 31.12.2029 (CAS RN 139262-23-0) with a purity by weight of 90 % or more

0.8698 ex 2924 29 70 42 N-Benzyloxycarbonylglycine (CAS RN 1138-80-3) with a purity by weight of 99 % or more 0 % — 31.12.2029

0.8183 ex 2924 29 70 46 S-Metolachlor (ISO) (CAS RN 87392-12-9) with a purity by weight of 98 % or more 0 % — 31.12.2026

0.7841 ex 2924 29 70 47 (S)-tert-Butyl (1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate 0 % — 31.12.2029 (CAS RN 868694-44-4) with a purity by weight of 95 % or more

0.8381 ex 2924 29 70 48 (3R)-N-(tert-butoxycarbonyl)-3-amino-4-(2,4,5-trifluorophenyl)butanoic acid 0 % — 31.12.2027 (CAS RN 486460-00-8) with a purity by weight of 97 % or more

0.8346 ex 2924 29 70 49 tert-Butyl [(1R,2S,5S)-2-amino-5-(dimethylcarbamoyl)cyclohexyl]carbamate ethanedioate 0 % — 31.12.2027 (CAS RN 1210348-34-7) with a purity by weight of 95 % or more 60/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8184 ex 2924 29 70 52 Zoxamide (ISO) (CAS RN 156052-68-5) with a purity by weight of 97 % or more 0 % — 31.12.2026

0.5622 ex 2924 29 70 53 4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8) 0 % — 31.12.2027

0.8362 ex 2924 29 70 54 2-[4-(Benzyloxy)phenyl]-N,N-dimethylacetamide (CAS RN 919475-15-3) with a purity by 0 % — 31.12.2027 weight of 98 % or more

0.5069 *ex 2924 29 70 55 N,N’-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5) 0 % — 31.12.2030

0.8315 ex 2924 29 70 56 Valifenalate (ISO) (CAS RN 283159-90-0) with a purity by weight of 98 % or more 0 % — 31.12.2027

0.8710 ex 2924 29 70 57 2-(Dimethylaminomethylidene)-4-methoxy-3-oxo-N-[(2,4,6-trifluorophenyl)methyl] 0 % — 31.12.2029 butanamide (CAS RN 1846582-17-9) with a purity by weight of 95 % or more

0.8043 *ex 2924 29 70 58 2-Chloro-N-[1-(4-chloro-3-fluorophenyl)-2-methylpropan-2-yl] 0 % — 31.12.2030 acetamide (CAS RN 787585-35-7) with a purity by weight of 98 % or more

0.6767 *ex 2924 29 70 62 2-Chlorobenzamide (CAS RN 609-66-5) 0 % — 31.12.2030

0.6766 *ex 2924 29 70 64 N-(3',4'-dichloro-5-fluoro[1,1’-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8) 0 % — 31.12.2030

0.7632 ex 2924 29 70 67 N,N'-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 42487-09-2) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 61/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8919 *ex 2924 29 70 68 Sacubitril calcium (INNM) (CAS RN 1369773-39-6) with a purity by weight of 98 % or more 0 % — 31.12.2030

0.6480 ex 2924 29 70 73 Napropamide (ISO) (CAS RN 15299-99-7) 0 % — 31.12.2029

0.2672 ex 2924 29 70 75 3-Amino-p-anisanilide (CAS RN 120-35-4) 0 % — 31.12.2029

0.2673 ex 2924 29 70 85 p-Aminobenzamide (CAS RN 2835-68-9) 0 % — 31.12.2029

0.4493 ex 2924 29 70 89 Flutolanil (ISO) (CAS RN 66332-96-5) 0 % — 31.12.2029

0.3691 ex 2924 29 70 92 3-Hydroxy-2-naphthanilide (CAS RN 92-77-3) 0 % — 31.12.2029

0.3692 ex 2924 29 70 93 3-Hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-61-5) 0 % — 31.12.2029

0.3693 ex 2924 29 70 94 2’-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0) 0 % — 31.12.2029

0.3863 ex 2924 29 70 97 1,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3) 0 % — 31.12.2029

0.3526 ex 2925 11 00 30 1,2-benzisothiazol-3(2H)-one 1,1-dioxide (CAS RN 81-07-2) or sodium 0 % — 31.12.2029 1,2-benzothiazol-3-olate 1,1-dioxide (CAS RN 128-44-9) with a purity by weight of 98 % or more

0.2674 ex 2925 19 95 10 N-Phenylmaleimide (CAS RN 941-69-5) 0 % — 31.12.2029

0.5612 ex 2925 19 95 20 4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9) 0 % — 31.12.2027

0.5740 ex 2925 19 95 30 N,N'-(m-Phenylene)dimaleimide (CAS RN 3006-93-7) 0 % — 31.12.2027 62/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8704 ex 2925 19 95 50 2-{2-[2-(1,3-Dioxo-2,3-dihydro-1H-isoindol-2-yl)ethoxy]ethoxy}acetic acid 0 % — 31.12.2029 (CAS RN 75001-09-1) with a purity by weight of 95 % or more

0.2934 ex 2925 29 00 10 Dicyclohexylcarbodiimide (CAS RN 538-75-0) 0 % — 31.12.2029

0.5891 ex 2925 29 00 20 N-[3-(Dimethylamino)propyl]-N'-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8) 0 % — 31.12.2029

0.8339 ex 2925 29 00 25 1-(3-(2-Hydroxyethyl)phenyl)guanidinium methanesulfonate (CAS RN 2101429-50-7) with 0 % — 31.12.2027 a purity by weight of 99 % or more

0.8943 *ex 2925 29 00 35 N-Amidinosarcosine hydrate (CAS RN 6020-87-7) with a purity by weight of 99 % or more 0 % — 31.12.2030

0.7749 ex 2925 29 00 40 N-Amidinosarcosine (CAS RN 57-00-1) 0 % — 31.12.2029

0.7832 ex 2925 29 00 50 (Chloromethylene)dimethyliminium chloride (CAS RN 3724-43-4) with a purity by weight of 0 % — 31.12.2029 95 % or more

0.8040 *ex 2925 29 00 70 Bromomethylidene(dimethyl)azanium bromide (CAS RN 24774-61-6) with a purity by 0 % — 31.12.2030 weight of 97 % or more

0.8873 ex 2925 29 00 80 Ethyl 4-[[(methylphenylamino)methylene]amino]benzoate (CAS RN 57834-33-0) with 0 % — 31.12.2029 a purity of 99 % or more by weight

0.7408 ex 2926 90 70 18 Flumethrin (ISO) (CAS RN 69770-45-2) 0 % — 31.12.2027

0.7466 ex 2926 90 70 19 2-(4-Amino-2-chloro-5-methylphenyl)-2-(4-chlorophenyl) acetonitrile (CAS RN 61437-85-2) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 63/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2668 ex 2926 90 70 20 2-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0) 0 % — 31.12.2029

0.7458 ex 2926 90 70 21 4-Bromo-2-chlorobenzonitrile (CAS RN 154607-01-9) 0 % — 31.12.2029

0.7514 ex 2926 90 70 22 Acetonitrile (CAS RN 75-05-8) 0 % — 31.12.2029

0.7805 ex 2926 90 70 24 2-Hydroxy-2-methylpropiononitrile (CAS RN 75-86-5) with a purity by weight of 99 % or 0 % — 31.12.2029 more

0.5227 ex 2926 90 70 25 2,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2) 0 % — 31.12.2026

0.6149 ex 2926 90 70 27 Cyhalofop-butyl (ISO) (CAS RN 122008-85-9) 0 % — 31.12.2029

0.8321 ex 2926 90 70 28 3-Bromo-6-chloro-2-fluorobenzonitrile (CAS RN 943830-79-3) with a purity by weight of 0 % — 31.12.2027 98 % or more

0.7430 ex 2926 90 70 29 2-Cyclohexylidene-2-phenylacetonitrile (CAS RN 10461-98-0) with a purity by weight of 0 % — 31.12.2027 95 % or more

0.7201 ex 2926 90 70 30 4,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2) 0 % — 31.12.2026

0.3522 ex 2926 90 70 32 Ethyl cyanoacetate (CAS RN 105-56-6) or methyl cyanoacetate (CAS RN 105-34-0) with 0 % — 31.12.2029 a purity by weight of 97 % or more

0.7406 ex 2926 90 70 33 Deltamethrin (ISO) (CAS RN 52918-63-5) 0 % — 31.12.2027

0.8907 *ex 2926 90 70 34 2,3,3,3-Tetrafluoro-2-(trifluoromethyl)propanenitrile (CAS RN 42532-60-5) with a purity by 0 % — 31.12.2030 weight of 99 % or more 64/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7034 ex 2926 90 70 35 4-Cyano-2-methoxybenzaldehyde (CAS RN 21962-45-8) 0 % — 31.12.2026

0.8908 *ex 2926 90 70 36 3,4-Dimethoxybicyclo[4.2.0]octa-1,3,5,-triene-7-carbonitrile (CAS RN 35202-54-1) with 0 % — 31.12.2030 a purity by weight of 97 % or more

0.8217 ex 2926 90 70 56 Methyl 2-cyano-2-propylpentanoate (CAS RN 66546-92-7) with a purity by weight of 97 % 0 % — 31.12.2026 or more

0.4182 ex 2926 90 70 61 m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3) 0 % — 31.12.2026

0.4802 ex 2926 90 70 70 Methacrylonitrile (CAS RN 126-98-7) 0 % — 31.12.2029

0.3521 ex 2926 90 70 75 Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0) 0 % — 31.12.2029

0.3516 ex 2926 90 70 80 Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8) 0 % — 31.12.2029

0.3514 ex 2926 90 70 86 Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6) 0 % — 31.12.2029

0.3515 ex 2926 90 70 89 Butyronitrile (CAS RN 109-74-0) 0 % — 31.12.2029

0.7337 ex 2927 00 00 25 2,2’-Azobis(4-methoxy-2,4-dimethylvaleronitrile) (CAS RN 15545-97-8) 0 % — 31.12.2027

0.2667 ex 2927 00 00 45 2,2’-Dimethyl-2,2’-azodipropionamidine dihydrochloride (CAS RN 2997-92-4) with a purity 0 % — 31.12.2029 by weight of 97 % or more

0.2810 ex 2927 00 00 55 4’-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4) with a purity by weight of 90 % 0 % — 31.12.2029 or more

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 65/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2661 ex 2928 00 90 10 3,3’-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N’-bipropionamide (CAS RN 32687-78-8) 0 % — 31.12.2029

0.6479 ex 2928 00 90 13 Cymoxanil (ISO) (CAS RN 57966-95-7) 0 % — 31.12.2029

0.6548 ex 2928 00 90 18 Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more 0 % — 31.12.2029

0.6871 *ex 2928 00 90 23 Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more 0 % — 31.12.2030

0.4929 *ex 2928 00 90 25 Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution 0 % — 31.12.2030

0.6985 ex 2928 00 90 28 Pentan-2-one oxime (CAS RN 623-40-5) 0 % — 31.12.2026

0.5438 ex 2928 00 90 30 N-Isopropylhydroxylamine (CAS RN 5080-22-8) 0 % — 31.12.2026

0.7448 ex 2928 00 90 33 4- Chlorophenylhydrazine Hydrochloride (CAS RN 1073-70-7) 0 % — 31.12.2029

0.8061 *ex 2928 00 90 38 Aqueous solution of methoxyammonium chloride (CAS RN 593-56-6), containing by weight: 0 % — 31.12.2030 — 30 % or more but not more than 40 % of methoxyammonium chloride — not more than 4 % of hydrochloric acid

0.8093 *ex 2928 00 90 43 2-(3-Methoxy-3-oxopropyl)-1,1,1-trimethylhydrazinium bromide (CAS RN 106966-25-0) 0 % — 31.12.2030 with a purity by weight of 99 % or more

0.5919 ex 2928 00 90 45 Tebufenozide (ISO) (CAS RN 112410-23-8) 0 % — 31.12.2029 66/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8158 ex 2928 00 90 48 1-{[(1H-Fluoren-9-ylmetoxi)carbonil]oxi}pyrrolidine-2,5-dione (CAS RN 82911-69-1) with 0 % — 31.12.2026 a purity by weight of 98 % or more

0.6635 *ex 2928 00 90 50 Aqueous solution of 2,2’-(hydroxyimino) bisethanesulphonic acid disodium salt 0 % — 31.12.2030 (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %

0.8474 ex 2928 00 90 53 Ethyl chloro[(4-methoxyphenyl)hydrazono]acetate (CAS RN 27143-07-3) with a purity by 0 % — 31.12.2027 weight of 98 % or more

0.5918 ex 2928 00 90 55 Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1) 0 % — 31.12.2029

0.8731 ex 2928 00 90 63 Daminozide (ISO) (CAS RN 1596-84-5) with a purity by weight of 97 % or more 0 % — 31.12.2029

0.4544 ex 2928 00 90 70 Butanone oxime (CAS RN 96-29-7) 0 % — 31.12.2029

0.5228 ex 2928 00 90 75 Metaflumizone (ISO) (CAS RN 139968-49-3) 0 % — 31.12.2026

0.3510 ex 2928 00 90 80 Cyflufenamid (ISO) (CAS RN 180409-60-3) 0 % — 31.12.2029

0.5827 ex 2929 10 00 20 Butyl isocyanate (CAS RN 111-36-4) 0 % — 31.12.2027

0.4188 ex 2929 10 00 35 1,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1) with a purity by weight of 99 % or 0 % — 31.12.2029 more

0.2660 ex 2929 10 00 40 m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094-99-7) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 67/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5033 ex 2929 10 00 45 2,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8) with a purity 0 % — 31.12.2029 by weight of 99 % or more

0.2657 ex 2929 10 00 50 m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9) 0 % — 31.12.2029

0.3509 ex 2929 10 00 60 Trimethylhexamethylene diisocyanate, mixed isomers 0 % — 31.12.2029

0.8451 ex 2929 10 00 65 Ethyl isocyanate (CAS RN 109-90-0) with a purity by weight of 98 % or more 0 % — 31.12.2027

0.8171 ex 2929 90 90 40 N-Butylphosphorothioic triamide (CAS RN 94317-64-3) with a purity by weight of 97 % or 0 % — 31.12.2026 more

0.8172 ex 2929 90 90 50 N-Propylphosphorothioic triamide (CAS RN 916809-14-8) with a purity by weight of 97 % 0 % — 31.12.2026 or more

0.8611 ex 2929 90 90 60 (2S)-2-[[2-[2-[2-[2-[2-[2-[2-[2-[2-[2-(2-Azidoethoxy)ethoxy]ethoxy]ethoxy]ethoxy]ethoxy] 0 % — 31.12.2028 ethoxy]ethoxy]ethylamino]-2-oxoethoxy]acetyl]amino]-N-[4-(hydroxymethyl) phenyl]-6-[[(4-methoxyphenyl)-diphenylmethyl]amino]hexanamide (CAS RN 1224601-12-0) with a purity by weight of 98 % or more

0.8701 ex 2929 90 90 70 N',N''-[(2S,3E,5S)-1,6-Diphenylhex-3-ene-2,5-diyl]bis(N,N-dimethylsulfuric diamide) 0 % — 31.12.2029 (CAS RN 1247119-27-2) in the form of an aqueous solution containing by weight 70 % or more but not more than 95 % of N',N''-[(2S,3E,5S)-1,6-Diphenylhex-3-ene-2,5-diyl]bis(N, N-dimethylsulfuric diamide) 68/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4298 ex 2930 20 00 40 Prosulfocarb (ISO) (CAS RN 52888-80-9) with purity by weight of 97 % or more 0 % — 31.12.2027

0.8036 *ex 2930 90 95 11 Benzyl (2S)-2-amino-3-[3-(methanesulphonylphenyl)]propanoate 0 % — 31.12.2026 hydrochloride (CAS RN 1194550-59-8) with a purity by weight of 98 % or more

0.6551 ex 2930 90 95 16 3-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1) 0 % — 31.12.2029

0.5999 ex 2930 90 95 17 2-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4) 0 % — 31.12.2029

0.7748 ex 2930 90 95 18 Dimethyl sulfone (CAS RN 67-71-0) 0 % — 31.12.2029

0.8050 *ex 2930 90 95 19 4-Amino-5-(ethanesulphonyl)-2-methoxybenzoic acid (CAS RN 71675-87-1) with a purity by 0 % — 31.12.2030 weight of 98 % or more

0.7799 ex 2930 90 95 20 4-(4-Methylphenylthio)benzophenone (CAS RN 83846-85-9) 0 % — 31.12.2029

0.6750 ex 2930 90 95 21 [2,2’-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3) 0 % — 31.12.2026

0.6617 *ex 2930 90 95 25 Bis(4-chlorophenyl)sulphone (CAS RN 80-07-9) with a purity by weight of 98 % or more 3,2 % — 31.12.2027

0.6873 *ex 2930 90 95 26 Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more 0 % — 31.12.2030

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 69/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8069 *ex 2930 90 95 28 Mesotrione (ISO) (CAS RN 104206-82-8) in form of wet cake or wet paste or in its crystalline 0 % — 31.12.2030 form, with — a purity of 74 % or more by weight and, — a maximum water content of 23 % by weight

0.7833 ex 2930 90 95 31 (p-Toluenesulphonyl)methyl isocyanide (CAS RN 36635-61-7) with a purity by weight of 0 % — 31.12.2029 98 % or more

0.8152 ex 2930 90 95 32 2-Methoxy-N-[2-nitro-5-(phenylsulfanyl)phenyl]acetamide (CAS RN 63470-85-9) with 0 % — 31.12.2026 a purity by weight of 96 % or more

0.6584 ex 2930 90 95 33 2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc acid (CAS RN 42986-22-1) 0 % — 31.12.2029

0.3811 ex 2930 90 95 35 Glutathione (CAS RN 70-18-8) 0 % — 31.12.2026

0.8510 ex 2930 90 95 36 Anhydrous potassium О-isopentyl-dithiocarbonate (CAS RN 928-70-1) with a purity by 0 % — 31.12.2027 weight of 90 % or more

0.8447 ex 2930 90 95 39 Thiodiacetic acid (CAS RN 123-93-3) with a purity by weight of 98 % or more 0 % — 31.12.2027

0.2928 ex 2930 90 95 40 3,3’-Thiodi(propionic acid) (CAS RN 111-17-1) 0 % — 31.12.2029

0.8481 ex 2930 90 95 41 2,2'-Diallyl-4,4'-sulphonyldiphenol (CAS RN 41481-66-7) with a purity by weight of 96 % or 0 % — 31.12.2027 more

0.6167 ex 2930 90 95 43 Trimethylsulfoxonium iodide (CAS RN 1774-47-6) 0 % — 31.12.2029 70/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2931 ex 2930 90 95 45 2-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5) 0 % — 31.12.2029

0.7689 ex 2930 90 95 50 3-Mercaptopropionic acid (CAS RN 107-96-0) 0 % — 31.12.2029

0.5114 *ex 2930 90 95 55 Thiourea (CAS RN 62-56-6) 0 % — 31.12.2030

0.4629 ex 2930 90 95 64 3-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2) 0 % — 31.12.2029

0.4296 ex 2930 90 95 68 Clethodim (ISO) (CAS RN 99129-21-2) 0 % — 31.12.2027

0.4187 ex 2930 90 95 78 4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6) 0 % — 31.12.2026

0.2999 ex 2930 90 95 80 Captan (ISO) (CAS RN 133-06-2) 0 % — 31.12.2029

0.4694 ex 2930 90 95 81 Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3) 3 % — 31.12.2029

0.8694 ex 2930 90 95 82 Propane-1,3-dithiol (CAS RN 109-80-8) with a purity by weight of 98 % or more 0 % — 31.12.2029

0.7985 *ex 2930 90 95 88 1-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl] 0 % — 31.12.2030 propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more

0.4094 ex 2930 90 95 89 Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or 0 % — 31.12.2026 O-pentyl-dithiocarbonates

0.7070 ex 2930 90 95 93 1-Hydrazino-3-(methylthio)propan-2-ol (CAS RN 14359-97-8) 0 % — 31.12.2026

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 71/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7078 ex 2930 90 95 95 N-(Cyclohexylthio)phthalimide (CAS RN 17796-82-6) 0 % — 31.12.2026

0.7086 ex 2930 90 95 97 Diphenyl sulphone (CAS RN 127-63-9) 0 % — 31.12.2026

0.5741 ex 2931 49 80 08 Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution 0 % — 31.12.2027

0.8546 ex 2931 49 80 10 Triethyl phosphonoacetate (CAS RN 867-13-0) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.5492 ex 2931 49 80 13 Trioctylphosphine oxide (CAS RN 78-50-2) 0 % — 31.12.2026

0.3492 ex 2931 49 80 20 Tetrabutylphosphonium acetate (CAS RN 30345-49-4) in the form of an aqueous solution, 0 % — 31.12.2029 containing by weight 40 % or more but not more than 50 % of tetrabutylphosphonium acetate

0.5758 ex 2931 49 80 25 (Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6) 0 % — 31.12.2027

0.7533 ex 2931 49 80 35 Ethyl phenyl(2,4,6-trimethylbenzoyl)phosphinate (CAS RN 84434-11-7) 0 % — 31.12.2029

0.2656 ex 2931 49 80 38 N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) containing by weight not more 0 % — 31.12.2029 than 15 % of water, and with a dry weight purity of 97 % or more

0.5229 ex 2931 49 80 40 Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1) 0 % — 31.12.2026

0.3987 ex 2931 49 80 55 3-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8) 0 % — 31.12.2029 72/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7709 ex 2931 59 90 50 2-Chloroethylphosphonic acid (CAS RN 16672-87-0) solid or in aqueous solution, with 0 % — 31.12.2029 a content by weight of 2-Chloroethylphosphonic acid of 65 % or more

0.4515 ex 2931 90 00 15 Methylcyclopentadienyl manganese tricarbonyl (CAS RN 12108-13-3) containing not more 0 % — 31.12.2029 than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl

0.8051 *ex 2931 90 00 23 Ixazomib citrate (INNM) (CAS RN 1239908-20-3) with a purity by weight of 95 % or more 0 % — 31.12.2030

0.8063 *ex 2931 90 00 28 Triethoxy(3-isocyanatopropyl)silane (CAS RN 24801-88-5) with a purity by weight of 96 % or 0 % — 31.12.2030 more

0.8272 ex 2931 90 00 30 Tert-Butylchlorodimethylsilane (CAS RN 18162-48-6) with a purity by weight of 99 % or 0 % — 31.12.2026 more

0.8316 ex 2931 90 00 38 2-(Trimethylsilyl)ethoxymethyl chloride (CAS RN 76513-69-4) with a purity by weight of 0 % — 31.12.2027 98 % or more

0.8442 ex 2931 90 00 40 Chlorotrimethylsilane (CAS RN 75-77-4) with a purity by weight of 98 % or more 0 % — 31.12.2027

0.8640 ex 2931 90 00 43 Trimethylindium (CAS RN 3385-78-2) with a purity by weight of 99 % or more 0 % — 31.12.2028

0.8649 ex 2931 90 00 48 4-Phenoxybenzeneboronic acid (CAS RN 51067-38-0) with a purity by weight of 98 % or 0 % — 31.12.2028 more

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 73/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4121 ex 2931 90 00 50 Trimethylsilane (CAS RN 993-07-7) 0 % — 31.12.2026

0.8554 ex 2931 90 00 55 3-(Hydroxymethyl)phenylboronic acid (CAS RN 87199-15-3) with a purity by weight of 95 % 0 % — 31.12.2028 or more

0.8652 ex 2931 90 00 58 Trimethylgallium (CAS RN 1445-79-0) with a purity by weight of 99 % or more 0 % — 31.12.2028

0.8941 *ex 2931 90 00 68 Hydrogen tetrakis(pentafluorophenyl)borate(1-)—N,N-dimethylaniline (1:1) 0 % — 31.12.2030 (CAS RN 118612-00-3) with a purity by weight of 99 % or more

0.3486 *ex 2932 13 00 10 Tetrahydrofurfuryl alcohol (CAS RN 97-99-4) 0 % — 31.12.2030

0.4590 ex 2932 14 00 20 1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4-deoxy-α-D-galactopyranoside 0 % — 31.12.2029 (CAS RN 56038-13-2) with a purity by weight of 98 % or more

0.8615 ex 2932 19 00 15 2-Methylfuran (CAS RN 534-22-5) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.8636 ex 2932 19 00 25 Methyl tetrahydro-2-furancarboxylate (CAS RN 37443-42-8) with a purity by weight of 98 % 0 % — 31.12.2028 or more

0.8605 ex 2932 19 00 35 (2S,3S,4S,5R)-3-(3,4-Difluoro-2-methoxyphenyl)-4,5-dimethyl-5-(trifluoromethyl) 0 % — 31.12.2028 tetrahydrofuran-2-yl-4-nitrobenzoate (CAS RN 2875066-49-0) with a purity by weight of 97 % or more

0.4514 ex 2932 19 00 41 2,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1) 0 % — 31.12.2029 74/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8252 ex 2932 19 00 55 (3S)-3-[4-[(5-Bromo-2-chlorophenyl)methyl]phenoxy]tetrahydro-furan 0 % — 31.12.2026 (CAS RN 915095-89-5) with a purity by weight of 97 % or more

0.7614 ex 2932 19 00 65 Tefuryltrione (ISO) (CAS RN 473278-76-1) 0 % — 31.12.2029

0.3487 ex 2932 19 00 70 Furfurylamine (CAS RN 617-89-0) 0 % — 31.12.2029

0.5240 ex 2932 19 00 80 5-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7) 0 % — 31.12.2026

0.5257 ex 2932 20 90 15 Coumarin (CAS RN 91-64-5) 0 % — 31.12.2026

0.7958 *ex 2932 20 90 18 4-Hydroxycoumarin (CAS-RN 1076-38-6) with a purity by weight of 98 % or more 0 % — 31.12.2030

0.8478 ex 2932 20 90 28 (R)-3-(3,4-difluoro-2-methoxyphenyl)-4,5-dimethyl-5-(trifluoromethyl)furan-2(5H)-one 0 % — 31.12.2027 (CAS RN 2875066-35-4) with a purity by weight of 98 % or more

0.8532 ex 2932 20 90 33 6-Cyclohexyl-4-methyl-2H-pyran-2-one (CAS RN 14818-35-0) with a purity of 99 % by 0 % — 31.12.2028 weight or more

0.8944 *ex 2932 20 90 38 6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7) with 0 % — 31.12.2030 a purity by weight of 96 % or more

0.5611 ex 2932 20 90 40 (S)-(–)-α-Amino-γ-butyrolactone hydrobromide (CAS RN 15295-77-9) 0 % — 31.12.2027

0.6094 ex 2932 20 90 45 2,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 75/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7283 ex 2932 20 90 50 L-Lactide (CAS RN 4511-42-6), D-lactide (CAS RN 13076-17-0), dilactide (CAS RN 95-96-5) 0 % — 31.12.2027 or meso-lactide (CAS RN 13076-19-2), each with a purity by weight of 90 % or more

0.4162 ex 2932 20 90 60 6’-(Diethylamino)-3’-methyl-2’-(phenylamino)-spiro[isobenzofuran-1(3H),9’-[9H] 0 % — 31.12.2026 xanthen]-3-one (CAS RN 29512-49-0)

0.7812 ex 2932 20 90 63 Selamectin (INN) 5Z-isomer (CAS RN 220119-17-5) 0 % — 31.12.2029

0.6620 *ex 2932 20 90 65 Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0) 0 % — 31.12.2030

0.4161 ex 2932 20 90 71 6’-(Dibutylamino)-3’-methyl-2’-(phenylamino)-spiro[isobenzofuran-1(3H),9’-[9H] 0 % — 31.12.2026 xanthen]-3-one (CAS RN 89331-94-2)

0.7599 ex 2932 20 90 75 3-Acetyl-6-methyl-2H-pyran-2, 4(3H)-dione (CAS RN 520-45-6) 0 % — 31.12.2029

0.3990 ex 2932 20 90 80 Gibberellic acid (CAS RN 77-06-5) with a purity by weight of 88 % or more, for use in the 0 % — 31.12.2029 manufacture of plant protection products(1)

0.4403 ex 2932 20 90 84 Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5) 0 % — 31.12.2029

0.8528 ex 2932 99 00 03 3,4-Dihydro-2-methoxy-2H-pyran (CAS RN 4454-05-1) with a purity by weight of 99 % or 0 % — 31.12.2028 more

0.7202 ex 2932 99 00 13 (4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro 0 % — 31.12.2026 [2,3-d][1 ,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2) 76/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5269 ex 2932 99 00 15 1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5) 0 % — 31.12.2026

0.7178 ex 2932 99 00 18 4-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile 0 % — 31.12.2026 (CAS RN 943311-78-2)

0.7431 ex 2932 99 00 23 2-Ethyl-3-hydroxy-4-pyrone (CAS RN 4940-11-8) 0 % — 31.12.2027

0.5759 ex 2932 99 00 25 1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7) 0 % — 31.12.2027

0.7639 ex 2932 99 00 27 (2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) with 0 % — 31.12.2029 a purity by weight of 99 % or more

0.8257 ex 2932 99 00 28 1,4,7,10,13-Pentaoxacyclopentadecane (CAS RN 33100-27-5) with a purity by weight of 0 % — 31.12.2026 90 % or more, the remainder mainly consisting of lineair precursors

0.7535 ex 2932 99 00 33 3-Hydroxy-2-methyl-4-pyrone (CAS RN 118-71-8) 0 % — 31.12.2029

0.8035 *ex 2932 99 00 38 1-Benzofuran-6-carboxylic acid (CAS RN 77095-51-3) with a purity by weight of 98 % or 0 % — 31.12.2030 more

0.6243 ex 2932 99 00 43 Ethofumesate (ISO) (CAS RN 26225-79-6) with a purity by weight of 97 % or more 0 % — 31.12.2029

0.5915 ex 2932 99 00 45 2-Butylbenzofuran (CAS RN 4265-27-4) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 77/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8384 ex 2932 99 00 48 (20R,25R)-spirost-5-en-3β-ol (CAS RN 512-04-9) with a purity by weight of 95 % or more 0 % — 31.12.2027

0.4907 ex 2932 99 00 50 7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6) 0 % — 31.12.2029

0.4063 ex 2932 99 00 51 3-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0) with a purity by 0 % — 31.12.2027 weight of 98 % or more

0.6771 *ex 2932 99 00 65 4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5) 0 % — 31.12.2030

0.7954 *ex 2932 99 00 83 6,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % 0 % — 31.12.2030 or more

0.3697 ex 2932 99 00 85 1,3:2,4-bis-O-(3,4-Dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2) 0 % — 31.12.2029

0.6262 ex 2933 19 90 15 Pyrasulfotole (ISO) (CAS RN 365400-11-9) with a purity by weight of 96 % or more 0 % — 31.12.2029

0.7836 ex 2933 19 90 27 3-(3,3,3-Trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic acid 0 % — 31.12.2029 (CAS RN 2229861-20-3) with a purity by weight of 95 % or more

0.7811 ex 2933 19 90 33 Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in 0 % — 31.12.2029 the manufacture of veterinary medicine(1)

0.8353 ex 2933 19 90 38 4,5-Dimethyl-1H-pyrazole-3-carboxylic acid (CAS RN 89831-40-3) with a purity by weight 0 % — 31.12.2027 of 98 % or more 78/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3877 ex 2933 19 90 40 Edaravone (INN) (CAS RN 89-25-8) 0 % — 31.12.2029

0.7119 ex 2933 19 90 45 5-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile 0 % — 31.12.2026 (CAS RN 120068-79-3)

0.8046 *ex 2933 19 90 48 1-(3-Iodo-1-isopropyl-1H-pyrazol-4-yl)ethanone (CAS RN 1269440-49-4) with a purity by 0 % — 31.12.2030 weight of 98 % or more

0.3992 ex 2933 19 90 50 Fenpyroximate (ISO) (CAS RN 134098-61-6) 0 % — 31.12.2029

0.8240 ex 2933 19 90 53 3-[2-(Dispiro[2.0.24.13]heptan-7-yl)ethoxy]-1H-pyrazole-4-carboxylic acid 0 % — 31.12.2026 (CAS RN 2608048-67-3) with a purity by weight of 98 % or more

0.8603 ex 2933 19 90 58 1H-Pyrazole (CAS RN 288-13-1) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.4494 ex 2933 19 90 60 Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9) 0 % — 31.12.2029

0.6261 *ex 2933 19 90 63 3-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9) with 0 % — 31.12.2029 a purity by weight of 97 % or more

0.8613 ex 2933 19 90 68 1-Methyl-1H-pyrazol-4-amine hydrochloride (CAS RN 127107-23-7) with a purity by weight 0 % — 31.12.2028 of 95 % or more

0.4404 ex 2933 19 90 70 4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2) 0 % — 31.12.2029

0.8312 ex 2933 21 00 45 Sodium (5S,8S)-8-methoxy-2,4-dioxo-1,3-diazaspiro[4.5] 0 % — 31.12.2026 decan-3-ide (CAS RN 1400584-86-2) with a purity by weight of 90 % or more

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 79/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4084 ex 2933 21 00 50 1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2) / (CAS RN 32718-18-6) 0 % — 31.12.2026

0.6835 *ex 2933 21 00 55 1-Aminohydantoin hydrochloride (CAS RN 2827-56-7) 0 % — 31.12.2030

0.4088 ex 2933 21 00 60 DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9) 0 % — 31.12.2026

0.5115 *ex 2933 21 00 80 5,5-Dimethylhydantoin (CAS RN 77-71-4) 0 % — 31.12.2030

0.5972 ex 2933 29 90 15 Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0) 0 % — 31.12.2029

0.8150 ex 2933 29 90 20 tert-Butyl (2S)-2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate 0 % — 31.12.2026 (CAS RN 1007882-59-8) with a purity by weight of 98 % or more

0.8452 ex 2933 29 90 38 Cyazofamid (ISO) (CAS RN 120116-88-3) with a purity by weight of 94 % or more 0 % — 31.12.2027

0.8639 ex 2933 29 90 43 2-Octyl-4,5-dihydro-1H-imidazole (CAS RN 10443-60-4) with a purity by weight of 95 % or 0 % — 31.12.2028 more

0.5215 ex 2933 29 90 60 1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea 0 % — 31.12.2026 (CAS RN 52378-40-2)

0.7120 ex 2933 29 90 75 2,2'-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2) 0 % — 31.12.2026

0.5821 ex 2933 29 90 80 Imazalil (ISO) (CAS RN 35554-44-0) 0 % — 31.12.2027 80/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6415 2933 39 50 Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4) 0 % — 31.12.2029

0.8574 ex 2933 39 99 04 Methyl 4-aminopicolinate (CAS RN 71469-93-7) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.8524 ex 2933 39 99 05 2,6-Bis-[1-(2-tert-butylphenylimino)-ethyl]pyridine (CAS RN 204203-17-8) with a purity by 0 % — 31.12.2028 weight of 95 % or more

0.8576 ex 2933 39 99 06 Tert-butyl (3S)-3-hydroxypiperidine-1-carboxylate (CAS RN 143900-44-1) with a purity by 0 % — 31.12.2028 weight of 97 % or more

0.8535 ex 2933 39 99 07 5-Bromo-2-methoxypyridine (CAS RN 13472-85-0) with a purity by weight of 99 % or more 0 % — 31.12.2028

0.8485 ex 2933 39 99 08 Fluazinam (ISO) (CAS RN 79622-59-6) with a purity by weight of 97 % or more 0 % — 31.12.2027

0.7186 ex 2933 39 99 10 2-Aminopyridin-4-ol hydrochloride (CAS RN 1187932-09-7) 0 % — 31.12.2026

0.6462 ex 2933 39 99 11 2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride 0 % — 31.12.2029 (CAS RN 153259-31-5)

0.5608 ex 2933 39 99 12 2,3-Dichloropyridine (CAS RN 2402-77-9) 0 % — 31.12.2027

0.8238 ex 2933 39 99 15 (S)-6-Bromo-2-(4-(3-(1,3-dioxoisoindolin-2-yl)propyl)-2,2-dimethylpyrrolidin-1-yl) 0 % — 31.12.2026 nicotinamide (CAS RN 2606972-45-4) with a purity by weight of 98 % or more

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 81/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8831 ex 2933 39 99 16 Tert-butyl (3R)-3-aminopiperidine-1-carboxylate (CAS RN 188111-79-7) with a purity by 0 % — 31.12.2029 weight of 96 % or more

0.8833 ex 2933 39 99 17 2,4-Dichloro-3-nitropyridine (CAS RN 5975-12-2) with a purity by weight of 99 % or more 0 % — 31.12.2029

0.8239 ex 2933 39 99 18 Perfluorophenyl 6-fluoropyridine-2-sulfonate (CAS RN 2608048-81-1) with a purity by 0 % — 31.12.2026 weight of 98 % or more

0.8329 ex 2933 39 99 22 N-(5-bromo-3-methylpyridin-2-yl)-N-methylbenzamide (CAS RN 446299-80-5) with a purity 0 % — 31.12.2027 by weight of 98 % or more

0.4594 ex 2933 39 99 24 2-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3) 0 % — 31.12.2029

0.7091 ex 2933 39 99 27 Pyridine-2,6-dicarboxylic acid (CAS RN 499-83-2) 0 % — 31.12.2026

0.6368 ex 2933 39 99 28 Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate 0 % — 31.12.2029 (CAS RN 212322-56-0)

0.6458 ex 2933 39 99 31 2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride 0 % — 31.12.2029 (CAS RN 127337-60-4)

0.5241 ex 2933 39 99 32 2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2) 0 % — 31.12.2026

0.7181 ex 2933 39 99 33 5-(3-Chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9) 0 % — 31.12.2026 82/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8420 ex 2933 39 99 34 Pyridin-3-ol (CAS RN 109-00-2) with a purity by weight of 98 % or more 0 % — 31.12.2027

0.3878 ex 2933 39 99 35 Aminopyralid (ISO) (CAS RN 150114-71-9) 0 % — 31.12.2029

0.7296 ex 2933 39 99 36 1-[2-[5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]acetyl]piperidine-4-carbothioamide 0 % — 31.12.2027 (CAS RN 1003319-95-6)

0.5230 ex 2933 39 99 37 Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2) 0 % — 31.12.2026

0.7348 ex 2933 39 99 38 (2-Chloropyridin-3-yl) methanol (CAS RN 42330-59-6) 0 % — 31.12.2027

0.8356 ex 2933 39 99 40 2-Hydroxypyridine-N-oxide (CAS RN 13161-30-3) with a purity by weight of 98 % or more 0 % — 31.12.2027

0.8266 ex 2933 39 99 42 Glasdegib maleate (INN) (CAS RN 2030410-25-2) with a purity by weight of 98 % or more 0 % — 31.12.2026

0.8711 ex 2933 39 99 44 Fluroxypyr-meptyl (CAS RN 81406-37-3) with a purity by weight of 95 % or more 0 % — 31.12.2029

0.8699 ex 2933 39 99 45 2,4-Dichloropyridine-3-carboxaldehyde (CAS RN 134031-24-6) with a purity by weight of 0 % — 31.12.2029 95 % or more

0.4706 ex 2933 39 99 47 (-)-trans-4-(4’-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5) 0 % — 31.12.2026

0.4749 ex 2933 39 99 48 Flonicamid (ISO) (CAS RN 158062-67-0) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 83/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8335 ex 2933 39 99 49 2-Phenyl-2-(2-pyridyl)acetamide (CAS RN 7251-52-7) with a purity by weight of 98 % or 0 % — 31.12.2027 more

0.6812 ex 2933 39 99 50 N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) 0 % — 31.12.2029 (CAS RN 1228879-37-5) with a purity by weight of 98 % or more

0.8709 ex 2933 39 99 51 2-Amino-3-bromo-5-nitropyridine (CAS RN 15862-31-4) with a purity by weight of 98 % or 0 % — 31.12.2029 more

0.8637 ex 2933 39 99 53 5-Methyl-2-pyridylamine (CAS RN 1603-41-4) with a purity by weight of 99 % or more 0 % — 31.12.2028

0.8729 ex 2933 39 99 54 2,5-Dichloro-4,6-dimethylpyridine-3-carbonitrile (CAS RN 91591-63-8) with a purity by 0 % — 31.12.2029 weight of 99 % or more

0.4646 ex 2933 39 99 55 Pyriproxyfen (ISO) (CAS RN 95737-68-1) of a purity by weight of 97 % or more 0 % — 31.12.2029

0.8618 ex 2933 39 99 56 2-[[[3-Methyl-4-(2,2,2-trifluoroethoxy)pyridin-2-yl]methyl]sulfanyl]1H-benzimidazole 0 % — 31.12.2028 (CAS RN 103577-40-8) with a purity by weight of 99 % or more

0.5760 ex 2933 39 99 57 Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0) 0 % — 31.12.2027

0.8624 ex 2933 39 99 58 Tert-butyl N-[5-(trifluoromethyl)pyridin-3-yl]carbamate (CAS RN 1187055-61-3) with 0 % — 31.12.2028 a purity by weight of 98 % or more 84/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2750 ex 2933 39 99 60 2-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0) with a purity by weight of 90 % 0 % — 31.12.2029 or more

0.7577 ex 2933 39 99 62 Ethyl 2,6-Dichloronicotinate (CAS RN 58584-86-4) 0 % — 31.12.2029

0.8527 ex 2933 39 99 63 1-Methyl-4-piperidone (CAS RN 1445-73-4) with a purity by weight of 97 % or more 0 % — 31.12.2028

0.3602 ex 2933 39 99 65 Acetamiprid (ISO) (CAS RN 135410-20-7) 0 % — 31.12.2029

0.8656 ex 2933 39 99 66 (2S,4S)-4-Ethoxy-2-[4-(methoxycarbonyl)phenyl]piperidin-1-ium 0 % — 31.12.2028

(2Z)-3-carboxyprop-2-enoate (CAS RN 2408761-21-5) with a purity by weight of 98 % or more

0.7616 ex 2933 39 99 68 1-(3-Chloropyridin-2-yl)-3-[[5-(trifluoromethyl)-2H-tetrazol-2-yl] 0 % — 31.12.2029 methyl]-1H-pyrazole-5-carboxylic acid (CAS RN 1352319-02-8) with a purity by weight of 85 % or more

0.5494 ex 2933 39 99 70 2,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7) 0 % — 31.12.2026

0.8707 ex 2933 39 99 72 N-[(1S,5R)-8-Benzyl-8-azabicyclo[3.2.1]octane-3-yl]-2-methylpropanamide 0 % — 31.12.2029 (CAS RN 376348-67-3) with a purity by weight of 98 % or more

0.7737 ex 2933 39 99 73 6-Chloro-4-(4-fluoro-2-methylphenyl)pyridin-3-amine hydrochloride 0 % — 31.12.2029

0.8072 *ex 2933 39 99 75 Clodinafop-propargyl (ISO) (CAS RN 105512-06-9) with a purity by weight of 90 % or more 0 % — 31.12.2030

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 85/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7813 ex 2933 39 99 76 Apalutamide (INN) (CAS RN 956104-40-8) 0 % — 31.12.2029

0.7818 ex 2933 39 99 78 Niraparib tosylate monohydrate (INNM) (CAS RN 1613220-15-7) 0 % — 31.12.2029

0.8074 *ex 2933 39 99 80 Tert-Butyl (3R)-3-(4-amino-2-oxo-2,3-dihydro-1H-imidazo[4, 5-c]pyridin-1-yl) 0 % — 31.12.2030 piperidine-1-carboxylate (CAS RN 1971921-33-1) with a purity by weight of 95 % or more

0.7906 ex 2933 39 99 81 4-Hydroxy-3-pyridinesulphonic acid (CAS RN 51498-37-4) with a purity by weight of 98 % 0 % — 31.12.2029 or more

0.7866 ex 2933 39 99 82 Picloram (ISO) (CAS RN 1918-02-1) containing by weight not more than 15 % of water and 0 % — 31.12.2029 with a dry weight purity of 92 % or more

0.7925 *ex 2933 39 99 84 Diethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more 0 % — 31.12.2030

0.5129 *ex 2933 39 99 85 2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3) 0 % — 31.12.2030

0.8912 *ex 2933 39 99 88 (1R,2S,4R)-2-Benzhydrylquinuclidin-3-one (2R,3R)-2,3-dihydroxysuccinate 0 % — 31.12.2030 (CAS RN 683206-54-4) with a purity by weight of 98 % or more

0.8096 *ex 2933 39 99 89 1-Benzyl-4-phenylpiperidine-4-carbonitrile monohydrochloride (CAS RN 71258-18-9) with 0 % — 31.12.2030 a purity by weight of 98 % or more

0.6545 *ex 2933 39 99 93 Boscalid (ISO) (CAS RN 188425-85-6) with a purity by weight of 98 % or more 0 % — 31.12.2029 86/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4525 ex 2933 49 10 20 3-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7) 0 % — 31.12.2029

0.6339 ex 2933 49 10 40 4,7-Dichloroquinoline (CAS RN 86-98-6) 0 % — 31.12.2029

0.3603 *ex 2933 49 10 70 Quinmerac (ISO) (CAS RN 90717-03-6) with a purity by weight of 98 % or more 0 % — 31.12.2029

0.7098 ex 2933 49 90 25 Cloquintocet-mexyl (ISO) (CAS RN 99607-70-2) 0 % — 31.12.2026

0.4927 *ex 2933 49 90 30 Quinoline (CAS RN 91-22-5) 0 % — 31.12.2030

0.8037 *ex 2933 49 90 55 2-(tert-Butoxycarbonyl)-5,7-dichloro-1,2,3,4-tetrahydroisoquinoline-6-carboxylic 0 % — 31.12.2030 acid (CAS RN 851784-82-2) with a purity by weight of 98 % or more

0.3880 ex 2933 49 90 70 Quinolin-8-ol (CAS RN 148-24-3) 0 % — 31.12.2029

0.8358 ex 2933 49 90 75 2-Methyl-4-(1-methyl-1H-1,2,4-triazol-5-yl)quinolin-8-ol (CAS RN 1174132-59-2) with 0 % — 31.12.2027 a purity by weight of 98 % or more

0.8556 ex 2933 49 90 85 (2R,4S)-2-Ethyl-6-(trifluoromethyl)-1,2,3,4-tetrahydroquinolin-4-amine methanesulfonate 0 % — 31.12.2028 (CAS RN 952582-02-4) with a purity by weight of 95 % or more

0.4043 ex 2933 52 00 10 Malonylurea (barbituric acid) (CAS RN 67-52-7) 0 % — 31.12.2026

0.6468 ex 2933 59 95 10 6-Amino-1,3-dimethyluracil (CAS RN 6642-31-5) 0 % — 31.12.2029

0.6151 ex 2933 59 95 13 2-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 87/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8597 ex 2933 59 95 14 2-Chloro-7-cyclopentyl-N,N-dimethyl-7H-pyrrolo[2,3-d]pyrimidine-6-carboxamide 0 % — 31.12.2028 (CAS RN 1211443-61-6) with a purity by weight of 97 % or more

0.8580 ex 2933 59 95 16 Tert-butyl 4-(6-aminopyridin-3-yl)piperazine-1-carboxylate (CAS RN 571188-59-5) with 0 % — 31.12.2028 a purity by weight of 98 % or more

0.8555 ex 2933 59 95 19 Tert-butyl 4-[(2-chloropyrimidin-5-yl)oxy]butanoate (CAS RN 945771-55-1) with a purity by 0 % — 31.12.2028 weight of 95 % or more

0.2745 ex 2933 59 95 20 2,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2) 0 % — 31.12.2029

0.5912 ex 2933 59 95 27 2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate 0 % — 31.12.2029 (CAS RN 88110-89-8)

0.8157 ex 2933 59 95 29 2-Amino-4-(4-methylpiperazin-1-yl) benzoic acid tert-butyl ester (CAS RN 1034975-35-3) 0 % — 31.12.2026 with a purity by weight of 95 % or more

0.8376 ex 2933 59 95 31 Sotorasib (INN) (CAS RN 2296729-00-3) with a purity by weight of 99 % or more 0 % — 31.12.2027

0.8456 ex 2933 59 95 32 5-Chloro-3-nitropyrazolo[1,5-a]pyrimidine (CAS RN 1363380-51-1) with a purity by weight 0 % — 31.12.2027 of 98 % or more

0.6240 ex 2933 59 95 33 4,6-Dichloro-5-fluoropyrimidine (CAS RN 213265-83-9) 0 % — 31.12.2029

0.7370 ex 2933 59 95 34 6-chloro-1,3-dimethyluracil (CAS RN 6972-27-6) with a purity by weight of 97 % or more 0 % — 31.12.2029 88/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7345 ex 2933 59 95 36 1-(Cyclopropylcarbonyl)piperazine hydrochloride (CAS RN 1021298-67-8) with a purity by 0 % — 31.12.2029 weight of 98 % or more

0.8248 ex 2933 59 95 38 5-(5-Chlorosulfonyl-2-ethoxyphenyl)-1-methyl-3-propyl-1,6-dihydro-7H-pyrazolo[4,3-d] 0 % — 31.12.2026 pyrimidin-7-one (CAS RN 139756-22-2) with a purity by weight of 98 % or more

0.8243 ex 2933 59 95 41 2-(4-Phenoxyphenyl)-7-(piperidin-4-yl)-4,5,6,7-tetrahydropyrazolo[1,5-a] 0 % — 31.12.2026 pyrimidine-3-carbonitrile (CAS RN 2190506-57-9) with a purity by weight of 98 % or more

0.8484 ex 2933 59 95 44 1,4,5,6-Tetrahydro-1,2-dimethylpyrimidine (CAS RN 4271-96-9) with a purity by weight of 0 % — 31.12.2027 98 % or more

0.4704 ex 2933 59 95 45 1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1) 0 % — 31.12.2029

0.8488 ex 2933 59 95 46 Trilaciclib (CAS RN 1374743-00-6) with a purity by weight of 99 % or more 0 % — 31.12.2027

0.6677 *ex 2933 59 95 47 6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or 0 % — 31.12.2030 more

0.4699 ex 2933 59 95 50 2-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1) 0 % — 31.12.2029

0.8612 ex 2933 59 95 51 (1R,5S)-8-Benzyl-3,8-diazabicyclo[3.2.1]octane; 4-(4-hydroxyphenyl)phenol (2:1) 0 % — 31.12.2028 (CAS RN 2642049-87-2) with a purity by weight of 95 % or more

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 89/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6987 ex 2933 59 95 52 6-Benzyladenine (CAS RN 1214-39-7) with a purity by weight of 97 % or more 0 % — 31.12.2026

0.8602 ex 2933 59 95 54 2-Chloro-4-methylpyrimidine (CAS RN 13036-57-2) with a purity by weight of 99 % or more 0 % — 31.12.2028

0.8834 ex 2933 59 95 56 Ruxolitinib phosphate (INNM) (CAS RN 1092939-17-7) with a purity by weight of 99 % or 0 % — 31.12.2029 more

0.2578 ex 2933 59 95 58 Sitagliptin phosphate monohydrate (INNM) (CAS RN 654671-77-9) with a purity by weight 0 % — 31.12.2027 of 95 % or more, and containing by weight not more than 1 % of a stabiliser

0.2744 ex 2933 59 95 60 2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8) 0 % — 31.12.2029

0.8717 ex 2933 59 95 61 4-Methyl-7H-pyrrolo[2,3-d]pyrimidine (CAS RN 945950-37-8) with a purity by weight of 0 % — 31.12.2029 98 % or more

0.7578 ex 2933 59 95 63 1-(3-Chlorophenyl) piperazine (CAS RN 6640-24-0) 0 % — 31.12.2029

0.8730 ex 2933 59 95 64 Thiopental (INNM) (CAS RN 76-75-5) with a purity by weight of 98 % or more 0 % — 31.12.2029

0.4772 ex 2933 59 95 65 1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) 0 % — 31.12.2029 (CAS RN 140681-55-6)

0.8700 ex 2933 59 95 66 Piperazin-2-one (CAS RN 5625-67-2) with a purity by weight of 96 % or more 0 % — 31.12.2029 90/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7825 ex 2933 59 95 68 Guanine (CAS RN 73-40-5) with a purity by weight of 99 % or more 0 % — 31.12.2029

0.2735 ex 2933 59 95 70 N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9) 0 % — 31.12.2029

0.5542 ex 2933 59 95 77 3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) 0 % — 31.12.2027 (CAS RN 762240-92-6)

0.7071 ex 2933 59 95 87 5-Bromo-2,4-dichloropyrimidine (CAS RN 36082-50-5) 0 % — 31.12.2026

0.6621 *ex 2933 69 80 15 2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6) 0 % — 31.12.2030

0.6951 ex 2933 69 80 17 Benzoguanamine (CAS RN 91-76-9) 0 % — 31.12.2026

0.7721 ex 2933 69 80 23 1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9) 0 % — 31.12.2029

0.7600 ex 2933 69 80 27 Troclosene sodium dihydrate (INNM) (CAS RN 51580-86-0) 0 % — 31.12.2029

0.7952 *ex 2933 69 80 33 2,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more 0 % — 31.12.2030

0.5272 ex 2933 69 80 40 Troclosene sodium (INNM) (CAS RN 2893-78-9) 0 % — 31.12.2026

0.8718 ex 2933 69 80 43 4-(4,6-Bis((biphenyl-4-yl)-1,3,5-triazine-2-yl)-1,3-benzodiole (CAS RN 182918-16-7) with 0 % — 31.12.2029 a purity by weight of 96 % or more

0.7464 ex 2933 69 80 45 2-(4,6-Bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 91/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5131 *ex 2933 69 80 55 Terbutryn (ISO) (CAS RN 886-50-0) for use as a raw material for the production of technical 0 % — 31.12.2030 preservatives, in other sectors than for pesticides(1)

0.4957 *ex 2933 69 80 60 Cyanuric acid (CAS RN 108-80-5) 0 % — 31.12.2030

0.6127 ex 2933 69 80 65 1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6) 0 % — 31.12.2029

0.6477 ex 2933 69 80 75 Metamitron (ISO) (CAS RN 41394-05-2) 0 % — 31.12.2029

0.3882 ex 2933 69 80 80 Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7) 0 % — 31.12.2029

0.6960 ex 2933 79 00 15 Ethyl N-(tert-Butoxycarbonyl)-L-pyroglutamate (CAS RN 144978-12-1) 0 % — 31.12.2026

0.8354 ex 2933 79 00 23 (S)-2-Amino-3-[(S)-2-oxopyrrolidin-3-yl]propanamide hydrochloride 0 % — 31.12.2027 (CAS RN 2628280-48-6) with a purity by weight of 95 % or more

0.7346 ex 2933 79 00 25 Methyl 2-oxo-2,3-dihydro-1H-indole-6-carboxylate (CAS RN 14192-26-8) 0 % — 31.12.2029

0.4294 ex 2933 79 00 30 5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0) 0 % — 31.12.2027

0.8038 *ex 2933 79 00 45 1-Phenyl-3H-indol-2-one (CAS RN 3335-98-6) with a purity by weight of 99 % or more 0 % — 31.12.2030

0.8203 ex 2933 79 00 55 (3S,4R)-3-Amino-4-hydroxypyrrolidin-2-one hydrochloride (CAS RN 2446872-13-3) with 0 % — 31.12.2026 a purity by weight of 98 % or more

0.8212 ex 2933 79 00 65 1-Dodecyl-2-pyrrolidone (CAS RN 2687-96-9) with a purity by weight of 98 % or more 0 % — 31.12.2026 92/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8351 ex 2933 79 00 75 N-(n-octyl)-2-pyrrolidone (CAS RN 2687-94-7) with a purity by weight of 99 % or more 0 % — 31.12.2027

0.8545 ex 2933 79 00 85 3,5-Dibromo-1-methyl-2(1H)-pyridinone (CAS RN 14529-54-5) with a purity by weight of 0 % — 31.12.2028 97 % or more

0.8547 ex 2933 99 80 01 3-Cyanoindole (CAS RN 5457-28-3) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.8548 ex 2933 99 80 02 (S)-1-Benzyl-3-pyrrolidinol (CAS RN 101385-90-4) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.8581 ex 2933 99 80 03 Tert-butyl 4-formyl-5-methoxy-7-methyl-1H-indole-1-carboxylate (CAS RN 1481631-51-9) 0 % — 31.12.2028 with a purity by weight of 97 % or more

0.8523 ex 2933 99 80 04 (S)-2,5-Dihydro-pyrrole-1,2-dicarboxylic acid 1-tert-butyl ester 2-methyl ester 0 % — 31.12.2028 (CAS RN 74844-93-2) with a purity by weight of 97 % or more

0.8156 ex 2933 99 80 07 4-(2-Oxo-2,3-dihydro-1H-benzimidazol-1-yl)butanoic acid (CAS RN 3273-68-5) with 0 % — 31.12.2026 a purity by weight of 98 % or more

0.8180 ex 2933 99 80 08 Prothioconazole (ISO) (CAS RN 178928-70-6) with a purity by weight of 98 % or more 0 % — 31.12.2026

0.8202 ex 2933 99 80 09 5,7-Difluoro-2-(4-fluorophenyl)-1H-indole (CAS RN 901188-04-3) with a purity by weight 0 % — 31.12.2026 of 98 % or more

0.8324 ex 2933 99 80 10 (R)-2-(2,5-difluorophenyl)pyrrolidine hydrochloride (CAS RN 1218935-60-4) with a purity 0 % — 31.12.2027 by weight of 98 % or more

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 93/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5243 ex 2933 99 80 13 5-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7) 0 % — 31.12.2026

0.6872 *ex 2933 99 80 16 Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more 0 % — 31.12.2030

0.8290 ex 2933 99 80 18 2-(2-Ethoxyphenyl)-5-methyl-7-propylimidazolo[5,1-f][1,2,4]-triazin-4 0 % — 31.12.2026

(3H)-one (CAS RN 224789-21-3) with a purity by weight of 95 % or more

0.6829 *ex 2933 99 80 21 1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide 0 % — 31.12.2030 hexafluorophosphate(V) (CAS RN 148893-10-1)

0.8249 ex 2933 99 80 22 Dibenz[b,f]azepine-5-carbonyl chloride (CAS RN 33948-22-0) with a purity by weight of 0 % — 31.12.2026 98 % or more

0.5625 ex 2933 99 80 24 1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3) 0 % — 31.12.2027

0.8089 *ex 2933 99 80 25 6-(4-Benzylamino-3-nitrophenyl)-5-methyl-4,5-dihydro-2H-pyridazin-3-one 0 % — 31.12.2030 (CAS RN 77469-62-6) with a purity by weight of 95 % or more

0.8418 ex 2933 99 80 26 Benzotriazole-1-yl-oxy-tris-pyrrolidino-phosphonium hexafluorophosphate 0 % — 31.12.2027 (CAS RN 128625-52-5) with a purity by weight of 97 % or more

0.6409 ex 2933 99 80 27 5,6-Dimethylbenzimidazole (CAS RN 582-60-5) 0 % — 31.12.2029

0.8357 ex 2933 99 80 28 7-(2-Methyl-4-nitrophenoxy)-[1,2,4]triazolo[1,5-a]pyridine (CAS RN 937263-44-0) with 0 % — 31.12.2027 a purity by weight of 98 % or more 94/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8804 ex 2933 99 80 29 1,1-Dimethylethyl (4S)-3-amino-2-(4-fluoro-3,5-dimethylphenyl)-2,4,6,7-tetrahydro-4- 0 % — 31.12.2029 methyl-5H-pyrazolo[4,3-c]pyridine-5-carboxylate (CAS RN 2212021-59-3) with a purity by weight of 99 % or more

0.3593 ex 2933 99 80 30 Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3) 0 % — 31.12.2029

0.8805 ex 2933 99 80 31 2-(2H-Benzotriazol-2-yl)-6-(2-phenylpropan-2-yl)-4-(2,4,4-trimethylpentan-2-yl)phenol 0 % — 31.12.2029 (CAS RN 73936-91-1) with a purity by weight of 97 % or more

0.8284 ex 2933 99 80 32 1H-1,2,3-Triazole (CAS RN 288-36-8) or 2H-1,2,3-triazole (CAS RN 288-35-7) with a purity 0 % — 31.12.2026 by weight of 99 % or more

0.6249 ex 2933 99 80 33 Penconazole (ISO) (CAS RN 66246-88-6) 0 % — 31.12.2029

0.7043 ex 2933 99 80 34 2,4-Dihydro-5-methoxy-4-methyl-3H-1,2,4-triazol-3-on (CAS RN 135302-13-5) 0 % — 31.12.2026

0.8643 ex 2933 99 80 35 2-[6-Methyl-2-(4-methylphenyl)imidazo[1,2-a]pyridin-3-yl]acetic acid 0 % — 31.12.2028 (CAS RN 189005-44-5) with a purity by weight of 98 % or more

0.4695 ex 2933 99 80 37 8-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1) 0 % — 31.12.2029

0.7045 ex 2933 99 80 38 (4aS,7aS)-Octahydro-1H-pyrrolo[3,4-b]pyridine (CAS RN 151213-40-0) 0 % — 31.12.2026

0.3591 ex 2933 99 80 40 trans-4-Hydroxy-L-proline (CAS RN 51-35-4) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 95/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7273 ex 2933 99 80 41 5-[4'-(Bromomethyl)biphenyl-2-yl]-1-trityl-1H-tetrazole (CAS RN 124750-51-2) 0 % — 31.12.2027

0.7185 ex 2933 99 80 42 (S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8) 0 % — 31.12.2026

0.8455 ex 2933 99 80 43 4-([1,2,4]Triazolo[1,5-a]pyridin-7-yloxy)-3-methylaniline (CAS RN 937263-71-3) with 0 % — 31.12.2027 a purity by weight of 98 % or more

0.8914 *ex 2933 99 80 44 (2R,3R)-2-(2,4-Difluorophenyl)-1-(1H-1,2,4-triazol-1-yl)butane-2,3-diol methanesulfonate 0 % — 31.12.2030 (CAS RN 1175536-50-1) with a purity by weight of 98 % or more

0.7269 ex 2933 99 80 46 (S)-Indoline-2-carboxylic acid (CAS RN 79815-20-6) 0 % — 31.12.2027

0.7410 ex 2933 99 80 48 5-Amino-6-methyl-2-benzimidazolone (CAS RN 67014-36-2) 0 % — 31.12.2027

0.8713 ex 2933 99 80 49 Tert-butyl (2S)-2-carbamoylpyrrolidine-1-carboxylate (CAS RN 35150-07-3) with a purity by 0 % — 31.12.2029 weight of 97 % or more

0.8722 ex 2933 99 80 50 Tert-butyl (3R)-3-aminopyrrolidine-1-carboxylate (CAS RN 147081-49-0) with a purity by 0 % — 31.12.2029 weight of 97 % or more

0.8702 ex 2933 99 80 51 (1R,5R)-Ethyl 3-benzyl-3-azabicyclo[3.1.0]hexane-1-carboxylate hydrochloride 0 % — 31.12.2029 (CAS RN 2914217-81-3) with a purity by weight of 97 % or more

0.8703 ex 2933 99 80 52 (S)-2-Methylpyrrolidine-2-carboxylic acid hydrochloride (CAS RN 1508261-86-6) with 0 % — 31.12.2029 a purity by weight of 98 % or more 96/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4585 ex 2933 99 80 55 Pyridaben (ISO) (CAS RN 96489-71-3) 0 % — 31.12.2029

0.7457 ex 2933 99 80 56 Methyl 3,5-diamino-6-chloropyrazine-2-carboxylate (CAS RN 1458-01-1) with a purity by 0 % — 31.12.2029 weight of 98 % or more

0.5901 ex 2933 99 80 57 2-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1) 0 % — 31.12.2029

0.7927 *ex 2933 99 80 60 2-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione 0 % — 31.12.2030 (CAS RN 143878-20-0) with a purity by weight of 99 % or more

0.7624 ex 2933 99 80 61 (1R,5S)-8-Benzyl-8-azabicyclo(3.2.1)octan-3-one hydrochloride (CAS RN 83393-23-1) 0 % — 31.12.2029

0.8809 ex 2933 99 80 62 6-O-tert-butyl 4a-O-methyl (4a)-1-(4-fluorophenyl)-4,5,7,8-tetrahydropyrazolo[3,4-g] 0 % — 31.12.2029 isoquinoline-4a,6-dicarboxylate (CAS RN 864972-21-4) with a purity by weight of 95 % or more

0.7680 ex 2933 99 80 63 L-Prolinamide (CAS RN 7531-52-4) 0 % — 31.12.2029

0.8359 ex 2933 99 80 64 (1R,2S,5S)-3-[(S)-3,3-dimethyl-2-(2,2,2-trifluoroacetamido) 0 % — 31.12.2027 butanoyl]-6,6-dimethyl-3-azabicyclo[3.1.0]hexane-2-carboxylic acid (CAS RN 2755812-45-2) with a purity by weight of 95 % or more

0.2732 *ex 2933 99 80 65 2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7) with 0 % — 31.12.2029 a purity by weight of 99 % or more

0.5468 ex 2933 99 80 67 Candesartan ethyl ester (INNM) (CAS RN 139481-58-6) 0 % — 31.12.2026

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 97/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7679 ex 2933 99 80 68 5-((1S,2S)-2-((2R,6S,9S,11R,12R,14aS,15S,16S,20R,23S,25aR)-9-Amino-20-((R)-3-amino-1- 0 % — 31.12.2029 hydroxy-3-oxopropyl)-2,11,12,15-tetrahydroxy-6-((R)-1-hydroxyethyl)-16-methyl- 5,8,14,19,22,25-hexaoxotetracosahydro-1H-dipyrrolo[2,1-c:2',1'-l][1,4,7,10,13,16] hexaazacyclohenicosin-23-yl)-1,2-dihydroxyethyl)-2-hydroxyphenyl hydrogen sulphate (CAS RN 168110-44-9)

0.7971 *ex 2933 99 80 70 5-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester 0 % — 31.12.2030 (CAS RN 3543-74-6) with a purity by weight of 98 % or more

0.4384 ex 2933 99 80 71 10-Methoxyiminostilbene (CAS RN 4698-11-7) 0 % — 31.12.2029

0.4503 ex 2933 99 80 72 1,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7) 0 % — 31.12.2029

0.8817 ex 2933 99 80 74 N,N-Dimethyl-N-octadecyl-1-octadecanaminium (SP-4-2)-[29H,31H-phthalocyanine-2- 0 % — 31.12.2029 sulfonato-N29,N30,N31,N32]cuprate (CAS RN 70750-63-9) with a purity by weight of 90 % or more

0.7759 ex 2933 99 80 75 1-[Bis(dimethylamino)methylene]-1H-benzotriazolium hexafluorophosphate(1-) 3-oxide 0 % — 31.12.2029 (CAS RN 94790-37-1)

0.8054 *ex 2933 99 80 76 2-Methylindoline (CAS RN 6872-06-6) with a purity by weight of 98 % or more 0 % — 31.12.2026

0.4382 ex 2933 99 80 78 3-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7) 0 % — 31.12.2029

0.8014 *ex 2933 99 80 80 Pyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more 0 % — 31.12.2026 98/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4164 ex 2933 99 80 81 1,2,3-Benzotriazole (CAS RN 95-14-7) 0 % — 31.12.2026

0.4165 ex 2933 99 80 82 Tolytriazole (CAS RN 29385-43-1) 0 % — 31.12.2029

0.6933 *ex 2933 99 80 87 Carfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more 0 % — 31.12.2030

0.3579 ex 2934 10 00 10 Hexythiazox (ISO) (CAS RN 78587-05-0) 0 % — 31.12.2029

0.2725 ex 2934 10 00 20 2-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8) 0 % — 31.12.2029

0.5538 ex 2934 10 00 35 (2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8) 0 % — 31.12.2027

0.6264 ex 2934 10 00 45 2-Cyanimino-1,3-thiazolidine (CAS RN 26364-65-8) 0 % — 31.12.2029

0.4750 ex 2934 10 00 60 Fosthiazate (ISO) (CAS RN 98886-44-3) 0 % — 31.12.2029

0.7312 ex 2934 20 80 15 Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7) 0 % — 31.12.2027

0.4346 ex 2934 20 80 25 1,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity by 0 % — 31.12.2027 weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more of 1,2-benzisothiazol-3(2H)-one

0.8712 ex 2934 20 80 35 3-Methyl-1,2-benzothiazole-1,1-dioxide (CAS RN 34989-82-7) with a purity by weight of 0 % — 31.12.2029 95 % or more

0.4910 *ex 2934 20 80 70 N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8) 0 % — 31.12.2030

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 99/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5537 ex 2934 30 90 10 2-Methylthiophenothiazine (CAS RN 7643-08-5) 0 % — 31.12.2027

0.8571 ex 2934 99 90 04 Silthiofam (ISO) (CAS RN 175217-20-6) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.8551 ex 2934 99 90 05 (S)-2-Methyl-1-(6-nitropyridin-3-yl)-4-(oxetan-3-yl)piperazine (CAS RN 1895867-67-0) with 0 % — 31.12.2028 a purity by weight of 97 % or more

0.8560 ex 2934 99 90 06 Cis-[2-(2,4-Dichlorodiphenyl)-2-(1H-imidazol-1-ylmethyl)-1,3-dioxolan-4yl] 0 % — 31.12.2028 methyl-4-methylbenzenesulfonate (CAS RN 134071-44-6) with a purity by weight of 99 % or more

0.8487 ex 2934 99 90 07 Cedazuridine (INN) (CAS RN 1141397-80-9) with a purity by weight of 99 % or more 0 % — 31.12.2027

0.8472 ex 2934 99 90 08 (R)-tert-butyl 2-(6-(5-chloro-2-((tetrahydro-2H-pyran-4-yl)amino) 0 % — 31.12.2027 pyrimidin-4-yl)-1-oxoisoindolin-2-yl)propanoate (CAS RN 2095665-45-3) with a purity by weight of 98 % or more

0.8449 ex 2934 99 90 09 3-[2-{(2R,3S)-3-[(1R)-1-{[tert-butyl(dimethyl)silyl]oxy}ethyl]-4-oxoazetidin-2-yl} 0 % — 31.12.2027 propanoyl]-4,4-dimethyl-1,3-oxazolidin-2-one (isomeric mixture of CAS RNs 114341-89-8 and 114418-63-2) with a purity by weight of 99 % or more

0.6492 ex 2934 99 90 10 Fluralaner (INN) (CAS RN 864731-61-3) 0 % — 31.12.2029

0.8388 ex 2934 99 90 11 Aqueous solution of d(P-thio)(T-G-A-C-T-G-T-G-A-A-C-G-T-T-C-G-A-G-A-T-G-A) 0 % — 31.12.2027 deoxyribonucleic acid (CAS RN 937402-51-2), containing by weight 15 % or more, but not more than 25 % of oligodeoxynucleotide 100/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5924 ex 2934 99 90 12 Dimethomorph (ISO) (CAS RN 110488-70-5) 0 % — 31.12.2029

0.8348 ex 2934 99 90 13 (6S)-6-methyl-5,6-Dihydro-4H-thieno[2,3-b] 0 % — 31.12.2027 thiopyran4-one-7,7-dioxide (CAS RN 148719-91-9) with a purity by weight of 98 % or more

0.8326 ex 2934 99 90 14 2-Mercaptoadenosine (CAS RN 43157-50-2) with a purity by weight of 98 % or more 0 % — 31.12.2027

0.7843 ex 2934 99 90 17 (S)-4-(Tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic acid (CAS RN 1273567-44-4) with 0 % — 31.12.2029 a purity by weight of 95 % or more

0.8250 ex 2934 99 90 18 Methyl (1R,3R)-1-(1,3-benzodioxol-5-yl)-2-(2-chloroacetyl)-1,3,4,9-tetrahydropyrido[5,4-b] 0 % — 31.12.2026 indole-3-carboxylate (CAS RN 171489-59-1) with a purity by weight of 99 % or more

0.8720 ex 2934 99 90 19 (4R,6S)-6-Methyl-7,7-dioxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-4-ol 0 % — 31.12.2029 (CAS RN 147128-77-6) with a purity by weight of 94 % or more

0.4715 ex 2934 99 90 20 Thiophene (CAS RN 110-02-1) 0 % — 31.12.2029

0.8253 ex 2934 99 90 22 4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4) with a purity by weight of 97 % 0 % — 31.12.2026 or more

0.4942 *ex 2934 99 90 25 2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8) 0 % — 31.12.2030

0.6252 ex 2934 99 90 26 4-Methylmorpholine 4-oxide in an aqueous solution (CAS RN 7529-22-8) 0 % — 31.12.2029

0.6362 ex 2934 99 90 27 2-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS RN 63676-22-2) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 101/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5242 ex 2934 99 90 28 11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4) 0 % — 31.12.2026

0.4700 ex 2934 99 90 30 Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7) 0 % — 31.12.2029

0.8724 ex 2934 99 90 31 Thenoic acid (CAS RN 1918-77-0) with a purity by weight of 97 % or more 0 % — 31.12.2029

0.8267 ex 2934 99 90 35 Nusinersen sodium (INNM) (CAS RN 1258984-36-9) with a purity by weight of 95 % or more 0 % — 31.12.2026

0.5813 ex 2934 99 90 37 4-Propan-2-ylmorpholine (CAS RN 1004-14-4) 0 % — 31.12.2027

0.8642 ex 2934 99 90 38 2-Chloro-9H-thioxanthen-9-one (CAS RN 86-39-5) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.6824 *ex 2934 99 90 39 4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4) 0 % — 31.12.2030

0.8094 *ex 2934 99 90 40 2,3-Pyrazinedicarboxylic anhydride (CAS RN 4744-50-7) with a purity by weight of 95 % or 0 % — 31.12.2026 more

0.6823 *ex 2934 99 90 41 11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8) 0 % — 31.12.2030

0.8380 ex 2934 99 90 45 4-[4-[(5s)-5-(Aminomethyl)-2-oxo-3-oxazolidinyl] phenyl]-3-morpholinone, hydrochloride 0 % — 31.12.2027 (CAS RN 898543-06-1) with a purity by weight of 98 % or more

0.5453 ex 2934 99 90 48 Propan-2-ol – 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine 0 % — 31.12.2026 (1:2) dihydrate (CAS RN 864743-41-9) 102/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7188 ex 2934 99 90 49 Cytidine 5'-(disodium phosphate) (CAS RN 6757-06-8) 0 % — 31.12.2026

0.8601 ex 2934 99 90 50 Vutrisiran (INN) (CAS RN 1867157-35-4) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.8330 ex 2934 99 90 51 Uridine 5’-triphosphate trisodium salt (CAS RN 19817-92-6) with a dry weight purity of 90 % 0 % — 31.12.2027 or more

0.8031 *ex 2934 99 90 55 Uridine (CAS RN 58-96-8) with a purity by weight of 98 % or more 0 % — 31.12.2030

0.7297 ex 2934 99 90 56 1-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]ethanone (CAS RN 1173693-36-1) 0 % — 31.12.2027

0.3575 *ex 2934 99 90 57 Dimethenamide-P (ISO) (CAS RN 163515-14-8) with a purity by weight of 93 % or more 0 % — 31.12.2029

0.7387 ex 2934 99 90 59 Dolutegravir (INN) (CAS RN 1051375-16-6) or dolutegravir sodium 0 % — 31.12.2027 (CAS RN 1051375-19-9)

0.2718 ex 2934 99 90 60 DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3) 0 % — 31.12.2029

0.7459 ex 2934 99 90 61 5-(1,2-Dithiolan-3-yl)valeric acid (CAS RN 1077-28-7) 0 % — 31.12.2029

0.7537 ex 2934 99 90 63 (2b,3a,5a,16b,17b)-2-(Morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol 0 % — 31.12.2029 (CAS RN 119302-20-4)

0.7449 ex 2934 99 90 64 2-Bromo-5-benzoylthiophene (CAS RN 31161-46-3) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 103/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7926 *ex 2934 99 90 65 Benzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight 0 % — 31.12.2026 of 98 % or more

0.4512 ex 2934 99 90 66 Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0) 0 % — 31.12.2029

0.7842 ex 2934 99 90 69 3-Methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one 0 % — 31.12.2029 (CAS RN 1220696-32-1) with a purity by weight of 95 % or more

0.7944 *ex 2934 99 90 70 1,3,4-Thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or 0 % — 31.12.2030 more

0.8289 ex 2934 99 90 71 3,4-Dichloro-1,2,5-thiadiazole (CAS RN 5728-20-1) with a purity by weight of 99 % or more 0 % — 31.12.2026

0.8317 ex 2934 99 90 72 2-Trifluoromethyl-9-allyl-9-thioxanthen-ol (CAS RN 850808-70-7) with a purity by weight of 0 % — 31.12.2027 98 % or more

0.4249 ex 2934 99 90 74 2-Isopropylthioxanthone (CAS RN 5495-84-1) 0 % — 31.12.2027

0.4052 ex 2934 99 90 75 (4R-cis)-1,1-Dimethylethyl-6-[2 0 % — 31.12.2026 [2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl] ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1)

0.8933 *ex 2934 99 90 76 Nedosiran sodium (INNM) (CAS RN 2247026-22-6) with a purity by weight of 95 % or more 0 % — 31.12.2030

0.8221 ex 2934 99 90 77 Tazemetostat (INN) (CAS 1403254-99-8) with a purity by weight of 99 % or more and its 0 % — 31.12.2026 salts 104/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8930 *ex 2934 99 90 78 Disodium uridine-5'-monophosphate (CAS RN 3387-36-8) with a purity by weight of 98 % or 0 % — 31.12.2030 more

0.8048 *ex 2934 99 90 81 1-(4-Aminophenyl)-5-(morpholin-4-yl)-2,3-dihydropyridin-6-one (CAS RN 1267610-26-3) 0 % — 31.12.2030 with a purity by weight of 98 % or more

0.7815 ex 2934 99 90 82 Rel-(3aR,12bR)-11-Chloro-2,3,3a,12b-tetrahydro-2-methyl-1H-dibenz[2,3:6,7]oxepino[4,5-c] 0 % — 31.12.2029 pyrrol-1-one (CAS RN 129385-59-7) with a purity by weight of 97 % or more

0.4643 ex 2934 99 90 83 Flumioxazin (ISO) (CAS RN 103361-09-7) of a purity by weight of 96 % or more 0 % — 31.12.2029

0.8222 ex 2934 99 90 85 Gilteritinib (INN) (CAS 1254053-43-4) with a purity by weight of 98 % or more and its salts 0 % — 31.12.2026

0.5133 *ex 2934 99 90 86 Dithianon (ISO) (CAS RN 3347-22-6) 0 % — 31.12.2030

0.5136 *ex 2934 99 90 87 2,2’-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4) 0 % — 31.12.2030

0.7738 ex 2934 99 90 88 (7S,9aS)-7-((Benzyloxy)methyl)octahydropyrazino[2,1-c][1,4]oxazine 0 % — 31.12.2029 dioxalate (CAS RN 1268364-46-0)

0.8905 *ex 2934 99 90 89 6R-[6α,7β(Z)]]-7-[2-Furyl(methoxyimino) 0 % — 31.12.2030 acetamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid (CAS RN 56271-94-4) with a purity by weight of 96 % or more

0.6486 ex 2935 90 90 10 Florasulam (ISO) (CAS RN 145701-23-1) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 105/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8479 ex 2935 90 90 16 2-Bromo-N-(4,5-dimethyl-1,2-oxazol-3-yl)-N-(methoxymethyl) benzene-1-sulfonamide 0 % — 31.12.2027 (CAS RN 415697-57-3) with a purity by weight of 97 % or more

0.8173 ex 2935 90 90 18 4-Amino-2,5-dimethoxy-N-methylbenzenesulfonamide (CAS RN 49701-24-8) with a purity 0 % — 31.12.2026 by weight of 98 % or more

0.8174 ex 2935 90 90 19 4-Amino-2,5-dimethoxy-N-phenylbenzenesulphonamide (CAS RN 52298-44-9) with a purity 0 % — 31.12.2026 by weight of 98 % or more

0.3565 ex 2935 90 90 20 Toluenesulphonamides 0 % — 31.12.2029

0.8224 ex 2935 90 90 21 Encorafenib (INN) (CAS 1269440-17-6) with a purity by weight of 99 % or more 0 % — 31.12.2026

0.8276 ex 2935 90 90 22 Methyl 2-(chlorosulfonyl)-4-(methylsulfonamidomethyl)benzoate (CAS RN 393509-79-0) 0 % — 31.12.2026 with a purity by weight of 90 % or more

0.5239 ex 2935 90 90 23 N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4) 0 % — 31.12.2026

0.8277 ex 2935 90 90 24 3-({[(4-methylphenyl)sulfonyl]carbamoyl}amino)phenyl 4-methylbenzenesulfonate 0 % — 31.12.2026 (CAS RN 232938-43-1) with a purity by weight of 99 % or more

0.8467 ex 2935 90 90 26 5-(2-Fluorophenyl)-1-(pyridin-3-ylsulfonyl)-1H-pyrrole-3-carbaldehyde (CAS RN 881677-11- 0 % — 31.12.2027

8) with a purity by weight of 97 % or more 106/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5261 ex 2935 90 90 27 Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino] 0 % — 31.12.2026 pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9)

0.8350 ex 2935 90 90 29 Vemurafenib (INN) (CAS RN 918504-65-1) with a purity by weight of 98 % or more 0 % — 31.12.2027

0.7183 ex 2935 90 90 30 6-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1) 0 % — 31.12.2026

0.8413 ex 2935 90 90 31 5-(N-3-methylphenyl-sulfonylamido)-(N’,N’’-bis-(3-methylphenyl)-isophthalicacid-diamide) 0 % — 31.12.2027 (CAS RN 2375645-78-4) with a purity by weight of 95 % or more

0.8693 ex 2935 90 90 32 4-Chloro-3-nitro-5-sulphamoylbenzoic acid (CAS RN 22892-96-2) with a purity by weight of 0 % — 31.12.2029 96 % or more

0.7677 ex 2935 90 90 33 4-Chloro-3-pyridinesulphonamide (CAS RN 33263-43-3) 0 % — 31.12.2029

0.7572 ex 2935 90 90 37 1,3-Dimethyl-1H-pyrazole-4-sulfonamide (CAS RN 88398-53-2) 0 % — 31.12.2029

0.7438 ex 2935 90 90 40 Venetoclax (INN) (CAS 1257044-40-8) 0 % — 31.12.2027

0.8606 ex 2935 90 90 41 Lenacapavir sodium (INNM) (CAS RN 2283356-12-5) with a purity by weight of 98 % or 0 % — 31.12.2028 more

0.5036 *ex 2935 90 90 42 Penoxsulam (ISO) (CAS RN 219714-96-2) 0 % — 31.12.2030

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 107/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7928 *ex 2935 90 90 44 4-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl] 0 % — 31.12.2030 bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more

0.3562 ex 2935 90 90 45 Rimsulfuron (ISO) (CAS RN 122931-48-0) 0 % — 31.12.2029

0.5451 ex 2935 90 90 48 (3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl) 0 % — 31.12.2026 pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid – 1-[(R)-(4-chlorophenyl)(phenyl)methyl] piperazine (1:1) (CAS RN 1235588-99-4)

0.2843 ex 2935 90 90 50 4,4'-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3) 0 % — 31.12.2029

0.4636 ex 2935 90 90 53 2,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4) 0 % — 31.12.2029

0.6777 *ex 2935 90 90 54 Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or 0 % — 31.12.2030 more

0.3560 ex 2935 90 90 55 Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3) 0 % — 31.12.2029

0.6802 *ex 2935 90 90 56 N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1) 0 % — 31.12.2030

0.6903 *ex 2935 90 90 57 N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4) 0 % — 31.12.2030

0.6664 *ex 2935 90 90 59 Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more 0 % — 31.12.2030 108/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4586 ex 2935 90 90 63 Nicosulphuron (ISO), (CAS RN 111991-09-4) of a purity by weight of 91 % or more 0 % — 31.12.2029

0.3561 ex 2935 90 90 65 Tribenuron-methyl (ISO) (CAS RN 101200-48-0) 0 % — 31.12.2029

0.7854 ex 2935 90 90 70 (4S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e] 0 % — 31.12.2029 thiazine-6-sulfonamide-1,1-dioxide (CAS RN 154127-42-1) with a purity by weight of 97 % or more

0.8055 *ex 2935 90 90 80 4-Chloro-3-sulphamoylbenzoic acid (CAS RN 1205-30-7) with a purity by weight of 97 % or 0 % — 31.12.2030 more

0.3704 ex 2935 90 90 88 N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate 0 % — 31.12.2029 monohydrate (CAS RN 25646-71-3)

0.4048 ex 2935 90 90 89 3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N, 0 % — 31.12.2026 N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0)

0.4944 *ex 2938 90 30 10 Ammonium glycyrrhizate (CAS RN 53956-04-0) 0 % — 31.12.2030

0.3554 ex 2938 90 90 10 Hesperidin (CAS RN 520-26-3) 0 % — 31.12.2029

0.5927 ex 2938 90 90 20 Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0) 0 % — 31.12.2029

0.7329 ex 2938 90 90 30 Rebaudioside A (CAS RN 58543-16-1) 0 % — 31.12.2027

0.7047 ex 2940 00 00 30 D(+)- Trehalose dihydrate (CAS RN 6138-23-4) 0 % — 31.12.2026

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 109/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8424 ex 2940 00 00 60 Methyl α-D-mannopyranoside (CAS RN 617-04-9) with a purity by weight of 98 % or more 0 % — 31.12.2027

0.8635 ex 2940 00 00 70 Alpha-D-Mannopyranose, 6-acetate 2,3,4-tribenzoate 1-(2,2,2-trichloroethanimidate) 0 % — 31.12.2028 (CAS RN 346441-49-4) with a purity by weight of 95 % or more

0.5233 ex 2941 20 30 10 Dihydrostreptomycin sulphate (CAS RN 5490-27-7) 0 % — 31.12.2026

0.6984 ex 2942 00 00 10 Sodium triacetoxyborohydride (CAS RN 56553-60-7) 0 % — 31.12.2026

0.8614 ex 2942 00 00 20 Dimethylamine—borane (1:1) (CAS RN 74-94-2) with a purity by weight of 98 % or more 0 % — 31.12.2028

0.3555 3201 20 00 Wattle extract 0 % — 31.12.2029

0.7943 *ex 3201 90 20 10 Rhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % 0 % — 31.12.2030 or less

0.3553 ex 3201 90 90 20 Tanning extracts derived from gambier and myrobalan fruits 0 % — 31.12.2029

0.6183 ex 3204 11 00 15 Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Disperse Blue 360 content of 99 % or more by weight

0.6277 ex 3204 11 00 25 N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine 0 % — 31.12.2029 (CAS RN 63741-10-6) 110/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5264 ex 3204 11 00 50 Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with 0 % — 31.12.2027 a colourant C.I. Disperse Blue 72 content of 95 % or more by weight

0.6972 ex 3204 12 00 15 Colourant C.I. Acid Brown 75 (CAS RN 8011-86-7) and preparations based thereon with 0 % — 31.12.2026 a colourant C.I. Acid Brown 75 content of 75 % or more by weight

0.6975 ex 3204 12 00 17 Colourant C.I. Acid Brown 355 (CAS RN 84989-26-4 or 60181-77-3) and preparations based 0 % — 31.12.2026 thereon with a colourant C.I. Acid Brown 355 content of 75 % or more by weight

0.7021 ex 3204 12 00 25 Colourant C.I. Acid Black 210 (CAS RN 85223-29-6 or 99576-15-5) and preparations based 0 % — 31.12.2026 thereon with a colourant C.I. Acid Black 210 content of 50 % or more by weight

0.6976 ex 3204 12 00 27 Colourant C.I. Acid Brown 425 (CAS RN 75234-41-2 or 119509-49-8) and preparations 0 % — 31.12.2026 based thereon with a colourant C.I. Acid Brown 425 content of 75 % or more by weight

0.6963 ex 3204 12 00 35 Colourant C.I. Acid Black 234 (CAS RN 157577-99-6) and preparations based thereon with 0 % — 31.12.2026 a colourant C.I. Acid Black 234 content of 75 % or more by weight

0.6964 ex 3204 12 00 37 Colourant C.I. Acid Black 210 sodium salt (CAS RN 201792-73-6) and preparations based 0 % — 31.12.2026 thereon with a colourant C.I. Acid Black 210 sodium salt content of 50 % or more by weight

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 111/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5925 ex 3204 12 00 40 Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0) 0 % — 31.12.2029

0.6965 ex 3204 12 00 45 Colourant C.I. Acid Blue 161/193 (CAS RN 12392-64-2) and preparations based thereon with 0 % — 31.12.2026 a colourant C.I. Acid Blue 161/193 content of 75 % or more by weight

0.6971 ex 3204 12 00 47 Colourant C.I. Acid Brown 58 (CAS RN 70210-34-3 or 12269-87-3) and preparations based 0 % — 31.12.2026 thereon with a colourant C.I. Acid Brown 58 content of 75 % or more by weight

0.6973 ex 3204 12 00 55 Colourant C.I. Acid Brown 165 (CAS RN 61724-14-9) and preparations based thereon with 0 % — 31.12.2026 a colourant C.I. Acid Brown 165 content of 75 % or more by weight

0.6974 ex 3204 12 00 57 Colourant C.I. Acid Brown 282 (CAS RN 70236-60-1 or 12219-65-7) and preparations based 0 % — 31.12.2026 thereon with a colourant C.I. Acid Brown 282 content of 75 % or more by weight

0.6535 ex 3204 12 00 60 Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Acid Red 52 content of 97 % or more by weight

0.6977 ex 3204 12 00 65 Colourant C.I. Acid Brown 432 (CAS RN 119509-50-1) and preparations based thereon with 0 % — 31.12.2026 a colourant C.I. Acid Brown 432 content of 75 % or more by weight 112/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6652 *ex 3204 12 00 70 Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with 0 % — 31.12.2030 a colourant C.I. Acid blue 25 content of 80 % or more by weight

0.4065 ex 3204 13 00 10 Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Basic Red 1 content of 50 % or more by weight

0.7394 ex 3204 13 00 15 Colourant C.I. Basic Blue 41 (CAS RN 12270-13-2) and preparations based thereon with 0 % — 31.12.2027 a colourant C.I. Basic Blue 41 content of 50 % or more by weight

0.7396 ex 3204 13 00 35 Colourant C.I. Basic Yellow 28 (CAS RN 54060-92-3) and preparations based thereon with 0 % — 31.12.2027 a colourant C.I. Basic Yellow 28 content of 50 % or more by weight

0.5805 ex 3204 13 00 40 Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations 0 % — 31.12.2027 based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight

0.6475 ex 3204 13 00 60 Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I Basic Red 1:1 content of 90 % or more by weight

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 113/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8888 ex 3204 13 00 85 Mixture containing by weight: 0 % — 31.12.2029 — 25 % or more but not more than 40 % of Colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and — 25 % or more but not more than 40 % of C.I. Basic Blue 159 (CAS RN 105953-73-9)

0.6569 *ex 3204 14 00 10 Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with 0 % — 31.12.2030 a colourant C.I. Direct Black 80 content of 90 % or more by weight

0.6571 ex 3204 14 00 30 C.I. Colourant Direct Red 23 (CAS RN 3441-14-3) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Direct Red 23 content of 90 % or more by weight

0.8537 ex 3204 15 00 15 Colourant C.I. Vat Blue 1 (CAS RN 482-89-3) and preparations based thereon with 0 % — 31.12.2028 a colourant C.I. Vat Blue 1 content of 94 % or more by weight

0.8842 ex 3204 15 00 25 Mixture in a 3:2 ratio of colourants C.I. Vat Blue 1 potassium salt (CAS RN 835912-68-0) and 0 % — 31.12.2029 C.I. VAT Blue 1 sodium salt (CAS RN 894-86-0) and preparations based thereon with a combined content of colourants C.I. Vat Blue 1 salts of 40 % or more by weight

0.6129 ex 3204 15 00 70 Colourant C.I. Vat Red 1 (CAS RN 2379-74-0) 0 % — 31.12.2029 114/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6325 ex 3204 16 00 30 Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content 0 % — 31.12.2029 thereof of 60 % or more but not more than 75 % by weight, and including one or more of the

following: — Colourant Reactive Yellow 201 (CAS RN 27624-67-5), — 1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or — 3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl] azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)

0.7367 ex 3204 16 00 40 Aqueous solution of Colourant C.I. Reactive Red 141 (CAS RN 61931-52-0) 0 % — 31.12.2027 — with a colourant C.I. Reactive Red 141 content of 13 % or more by weight, and — containing a preservative

0.2517 ex 3204 17 00 10 Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight

0.5433 ex 3204 17 00 15 Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with 0 % — 31.12.2026 a colourant C.I. Pigment Green 7 content of 40 % or more by weight

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 115/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7092 ex 3204 17 00 18 Colourant C.I. Pigment Orange 16 (CAS RN 6505-28-8) and preparations based thereon with 0 % — 31.12.2026 a colourant C.I. Pigment Orange 16 content of 90 % or more by weight

0.6130 ex 3204 17 00 19 Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Pigment Red 48:2 content of 85 % or more by weight

0.5505 ex 3204 17 00 20 Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with 0 % — 31.12.2026 a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight

0.6279 ex 3204 17 00 21 Colourant C.I. Pigment Blue 15:4 (CAS RN 147-14-8) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Pigment Blue 15:4 content of 35 % or more by weight

0.5259 ex 3204 17 00 22 Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with 0 % — 31.12.2026 a colourant C.I. Pigment Red 169 content of 50 % or more by weight

0.6246 ex 3204 17 00 23 Colourant C.I. Pigment Brown 41 (CAS RN 211502-16-8 or CAS RN 68516-75-6) 0 % — 31.12.2029

0.6453 ex 3204 17 00 24 Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with 0 % — 31.12.2029 a Colourant C.I. Pigment Red 57:1 content of 20 % or more by weight 116/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5427 ex 3204 17 00 25 Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with 0 % — 31.12.2026 a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight

0.7261 ex 3204 17 00 26 Colourant C.I. Pigment Orange 13 (CAS RN 3520-72-7) and preparations based thereon with 0 % — 31.12.2027 a colourant C.I. Pigment Orange 13 content of 80 % or more by weight

0.8678 ex 3204 17 00 28 Colourant C.I. Pigment Yellow 12 (CAS RN 6358–85-6) and preparations based thereon with 0 % — 31.12.2028 a colourant C.I. Pigment Yellow 12 content of 21 % or more by weight

0.7659 ex 3204 17 00 31 Colourant C.I. Pigment Red 63:1 (CAS RN 6417-83-0) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Pigment Red 63:1 content of 70 % or more by weight

0.6603 *ex 3204 17 00 33 Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with 0 % — 31.12.2030 a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight

0.5426 ex 3204 17 00 35 Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with 0 % — 31.12.2026 a colourant C.I. Pigment Red 202 content of 70 % or more by weight

0.7565 ex 3204 17 00 37 Colourant C.I. Pigment Red 81:2 (CAS RN 75627-12-2) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Pigment Red 81:2 content of 30 % or more by weight

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 117/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8827 ex 3204 17 00 51 Colourant C.I. Pigment Yellow 174 (CAS RN 78952-72-4) and preparations based thereon 0 % — 31.12.2029 with a colourant C.I. Pigment Yellow 174 content of 50 % or more by weight.

0.8798 ex 3204 17 00 52 Colourant C.I. Pigment Red 112 (CAS RN 6535-46-2) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Pigment Red 112 content of 90 % or more by weight

0.8795 ex 3204 17 00 53 Colourant C.I. Pigment Red 122 (CAS RN 980-26-7) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Pigment Red 122 content of 90 % or more by weight

0.8801 ex 3204 17 00 54 Colourant C.I. Pigment Yellow 65 (CAS RN 6528-34-3) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Pigment Yellow 65 content of 90 % or more by weight

0.8816 ex 3204 17 00 56 Colourant C.I. Pigment Red 146 (CAS RN 5280-68-2) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Pigment Red 146 content of 90 % or more by weight

0.8821 ex 3204 17 00 57 Colourant C.I. Pigment Yellow 13 (CAS RN 5102-83-0) and preparations based thereon with 0 % — 31.12.2029 a content of colourant C.I. Pigment Yellow 13 of 50 % or more by weight

0.8892 ex 3204 17 00 58 Colourant C.I. Pigment Yellow 17 (CAS RN 4531-49-1) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Pigment Yellow 17 content of 90 % or more by weight 118/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8877 ex 3204 17 00 59 Colourant C.I. Pigment Yellow 180 (CAS RN 77804-81-0) and preparations based thereon 0 % — 31.12.2029 with a colourant C.I. Pigment Yellow 180 content of 90 % or more by weight

0.5832 ex 3204 17 00 75 Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with 0 % — 31.12.2027 a colourant C.I. Pigment Orange 5 content of 80 % or more by weight

0.5700 ex 3204 17 00 85 Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with 0 % — 31.12.2027 a colourant C.I. Pigment Blue 61 content of 35 % or more by weight

0.5680 ex 3204 17 00 88 Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and 0 % — 31.12.2027 preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight

0.6979 ex 3204 19 00 13 Colourant C.I. Sulphur Black 1 (CAS RN 1326-82-5) and preparations based thereon with 0 % — 31.12.2026 a colourant C.I. Sulphur Black 1 content of 75 % or more by weight

0.5100 ex 3204 19 00 73 Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with 0 % — 31.12.2026 a colourant C.I. Solvent Blue 104 content of 97 % or more by weight

0.8881 ex 3204 19 00 74 Colourant C.I. Solvent Red 135 (CAS RN 71902-17-5) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Solvent Red 135 content of 90 % or more by weight

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 119/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8883 ex 3204 19 00 76 Colourant C.I. Solvent Red 52 (CAS RN 81-39-0) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Solvent Red 52 content of 90 % or more by weight

0.5282 ex 3204 19 00 77 Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and 0 % — 31.12.2026 preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight

0.8880 ex 3204 19 00 78 Colourant C.I. Solvent Yellow 114 (CAS RN 17772-51-9) and preparations based thereon 0 % — 31.12.2029 with a colourant C.I. Solvent Yellow 114 content of 90 % or more by weight

0.4058 ex 3204 20 00 10 Colourant C.I. Fluorescent Brightener 184 (CAS RN 7128-64-5) and preparations based 0 % — 31.12.2026 thereon with a colourant C.I. Fluorescent Brightener 184 content of 20 % or more by weight

0.5395 ex 3204 20 00 30 Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based 0 % — 31.12.2026 thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight

0.6473 ex 3204 90 00 10 Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) 0 % — 31.12.2029 (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight 120/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7658 ex 3205 00 00 20 Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2) preparation, in a form of dry powder, 0 % — 31.12.2029

containing by weight: — 16 % or more but not more than 25 % of Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2) — 65 % or more but not more than 75 % of aluminium hydroxide (CAS RN 21645-51-2)

0.7699 ex 3205 00 00 30 Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1) preparation, in a form of dry powder, 0 % — 31.12.2029

containing by weight: — 16 % or more but not more than 21 % of Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1) — 65 % or more but not more than 69 % of aluminium hydroxide (CAS RN 21645-51-2)

0.5378 ex 3206 19 00 10 Preparation containing by weight: 0 % — 31.12.2026 — 72 % (± 2 %) of mica (CAS RN 12001-26-2), and — 28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7)

0.8770 ex 3206 20 00 50 Nickel iron chromite black spinel (C.I. pigment black 30) (CAS RN 71631-15-7) 0 % — 31.12.2029

0.8765 ex 3206 20 00 60 Cobalt chromite green spinel (C.I. pigment green 26) (CAS RN 68187-49-5) 0 % — 31.12.2029

0.8768 ex 3206 20 00 70 Copper chromite black spinel (C.I. pigment black 28) (CAS RN 68186-91-4) 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 121/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8874 ex 3206 41 00 10 Colourant C.I. Pigment Blue 29 (CAS RN 57455-37-5) and preparations based thereon with 0 % — 31.12.2029 a colourant C.I. Pigment Blue 29 content of 90 % or more by weight

0.6245 ex 3206 49 70 20 Colourant C.I. Pigment Blue 27 (CAS RN 14038-43-8) 0 % — 31.12.2029

0.7390 ex 3206 49 70 40 Colourant C.I. Pigment Blue 27 (CAS RN 25869-00-5) and preparations thereon with 0 % — 31.12.2027 a colourant C.I. Pigment Blue 27 content of 85 % or more by weight

0.8211 ex 3206 49 70 50 Concentrated mixture of pigments (masterbatch) in the form of pellets containing by weight: 0 % — 31.12.2026 — 50 % or more but not more than 70 % of polyamide-6.6 (CAS RN 32131-17-2), — 15 % or more but not more than 20 % of iron powder (CAS RN 7439-89-6), — 5 % or more but not more than 15 % of barium sulphate (CAS RN 7727-43-7), and — 5 % or more but not more than 10 % of blue pigment, consisting of a mixture of Titanium dioxide (CAS RN 13463-67-7) and Copper(II) phtalocyanine (CAS RN 147-14-8)

0.8800 ex 3206 49 70 60 Colourant C.I. Pigment Yellow 164 (CAS RN 68412-38-4) and preparations based thereon 0 % — 31.12.2029 with a colourant C.I. Pigment Yellow 164 content of 90 % or more by weight

0.3673 3206 50 00 Inorganic products of a kind used as luminophores 0 % — 31.12.2029 122/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8676 ex 3207 30 00 30 Silver paste, containing by weight: 0 % — 31.12.2028 — 45 % or more, but not more than 90 % silver (CAS RN 7440-22-4) and — 59 % or more, but not more than 92 % of the total solids (including silver) for use as conductor in the production of solar cells(1)

0.8630 ex 3207 30 00 40 Aluminium paste, containing by weight: 0 % — 31.12.2028 — 72 % or more but not more than 82 % aluminium (CAS RN 7429-90-5) — with a viscosity of 10 or more, but not more than 100 Pa.s (Brookfield RVT, 14 Spindle, 20 rpm, 25 °C ± 0,5 °C) — with an aluminium particle size of not more than 25 μm for use in the production of solar cells(1)

0.2511 ex 3208 20 10 10 Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl 0 % — 31.12.2029 methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer

0.4511 ex 3208 20 10 20 Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of 0 % — 31.12.2029 acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether

0.8412 ex 3208 20 10 50 Copolymer of vinylcaprolactam and vinylpyrrolidone (CAS RN 51987-20-3) in the form of 0 % — 31.12.2027 a solution in 2-butoxyethanol (CAS RN 111-76-2) containing by weight 45 % or more but not ex 3905 91 00 25 more than 58 % of copolymer

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 123/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8137 *ex 3208 90 19 13 Mixture, containing by weight: 0 % — 31.12.2030 ex 3911 90 99 63 — 20 % or more but not more than 40 % of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0), — 7 % or more but not more than 20 % of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-06-3), — 40 % or more, but not more than 65 % of ethanol (CAS RN 64-17-5), — 1 % or more but not more than 7 % of butan-1-ol (CAS RN 71-36-3)

0.3967 ex 3208 90 19 15 Chlorinated polyolefins, in a solution 0 % — 31.12.2029

0.2504 ex 3208 90 19 40 Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol 0 % — 31.12.2029 and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane

0.6154 ex 3208 90 19 45 Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically 0 % — 31.12.2029 modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate ex 3824 99 92 63

0.6989 ex 3208 90 19 47 Solution containing by weight: 0 % — 31.12.2026 — 0,1 % or more but not more than 20 % of alkoxygroups containing siloxane polymer with alkyl or aryl substituents — 75 % or more of an organic solvent containing one or more of propyleneglycolethylether (CAS RN 1569-02-4), propylene glycol mono methylether acetate (CAS RN 108-65-6) or propyleneglycol propylether (CAS RN 1569-01-3) 124/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2502 ex 3208 90 19 50 Solution containing by weight: 0 % — 31.12.2026 — (63,5 ±10) % of gamma-butyrolactone (CAS RN 96-48-0), — (30 ± 10) % of aromatic polyhydroxyamide resin, — (3,5 ± 1,5) % of naphthoquinone ester derivative, — (1,5 ± 0,5) % of arylsilicic acid, — (1,5 ± 0,5) % of [3-(trimethoxysilyl)propyl]urea (CAS RN 23843-64-3)

0.6726 ex 3208 90 19 55 Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene 0 % — 31.12.2026 and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent

0.4037 ex 3208 90 19 60 Copolymer of hydroxystyrene with one or more of the following: 0 % — 31.12.2026 — styrene — alkoxystyrene — alkylacrylates dissolved in ethyl lactate

0.6005 ex 3208 90 19 65 Silicones containing 50 % by weight or more of xylene and not more than 25 % by weight of 0 % — 31.12.2029 silica, of a kind used for the manufacture of long term surgical implants

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 125/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5777 ex 3215 19 00 20 Ink: 0 % l 31.12.2027 — consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9), — with a total solid content by weight of 55 % or more, but not more than 57 %, and — with a specific density of 1,40 g/cm3 or more, but not more than 1,60 g/cm3, for use in the manufacture of electrodes(1)

0.2501 ex 3215 90 70 20 Heat sensitive ink fixed on a plastic film 0 % — 31.12.2029

0.4533 ex 3215 90 70 30 Disposable cartridge ink, containing by weight: 0 % — 31.12.2029 — 1 % or more, but not more than 10 % of amorphous silicon dioxide or — 3,8 % or more of dye C.I. Solvent Black 7 in organic solvents for use in the marking of integrated circuits(1)

0.3661 ex 3301 12 10 10 Essential oil of sweet orange (CAS RN 8028-48-6) or essential oil of sour orange 0 % — 31.12.2029 (CAS RN 72968-50-4), not deterpenated

0.4863 ex 3402 39 90 10 Sodium lauroyl methyl isethionate 0 % — 31.12.2026

0.4002 ex 3402 42 00 10 Vinyl copolymer surface active agent based on polypropylene glycol 0 % — 31.12.2029 126/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4277 ex 3402 42 00 20 Surfactant containing 1,4-dimethyl- 1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, 0 % — 31.12.2027 polymerised with oxirane, methyl terminated

0.6285 ex 3402 90 10 10 Surface-active mixture of methyltri-C8-C10-alkylammonium chlorides (CAS RN 63393-96-4) 0 % — 31.12.2029

0.8758 ex 3402 90 10 15 Silicone surfactant consisting of a mixture of: 0 % — 31.12.2029 — 60 % or more but not more than 85 % by weight of Polyalkyleneoxidedimethylsiloxane copolymer (CAS RN 68937-55-3), — 15 % or more but not more than 40 % by weight of poly(oxy-1,2-ethanediyl), α-hydro-ω-hydroxy-Ethane-1,2-diol, ethoxylated (CAS RN 25322-68-3), — 0,8 % or more but not more than 1,5 % by weight Octamethylcyclotetrasiloxane (CAS RN 556-67-2), — 0,6 % or more but not more than 1,0 % by weight Decamethylcyclopentasiloxane (CAS RN 541-02-6), — 0,2 % or more but not more than 0,5 % by weight Dodecamethylcyclohexasiloxane (CAS RN 540-97-6)

0.3660 ex 3402 90 10 80 Mixture, containing by weight: 0 % — 31.12.2029 — 80 % or more but not more than 90 % of docusate sodium (INN) (CAS RN 577-11-7), and — 10 % or more but not more than 20 % of sodium benzoate (CAS RN 532-32-1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 127/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4313 ex 3506 91 90 40 Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more 0 % — 31.12.2029 than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330)

0.6293 ex 3507 90 90 10 Preparation of Achromobacter lyticus protease (CAS RN 123175-82-6) for use in the 0 % — 31.12.2029 manufacture of human and analogue insulin products(1)

0.7050 ex 3507 90 90 30 Salicylate 1-monooxygenase (CAS RN 9059-28-3) in aqueous solution with 0 % — 31.12.2026 — an enzyme concentration of 6,0 U/ml or more, but not more than 7,4 U/ml , — a concentration by weight of sodium azide (CAS RN 26628-22-8) of not more than 0,09 % and — a pH value of 6,5 or more, but not more than 8,5

0.4922 ex 3601 00 00 20 Pyrotechnical mixture in cylindrical shape or granulate form, composed of strontium nitrate 0 % — 31.12.2026 or copper nitrate or basic copper nitrate in a matrix of nitroguanidine or guanidine nitrate, also containing a binder and additives, used as a component of airbag inflators(1)

0.7318 ex 3603 50 00 10 Igniters for gas generators with: 0 % — 31.12.2028 — an overall maximum length of 15,5 mm or more but not more than 29,4 mm, and — a pin length of 6,4 mm or more but not more than 12,6 mm 128/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5465 ex 3801 90 00 10 Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6) 0 % — 31.12.2026

0.6759 *ex 3802 10 00 10 Mixture of activated carbon and polyethylene, in form of powder 0 % — 31.12.2030

0.7368 ex 3802 10 00 40 Chemically activated carbon for the absorption and desorption of vapors, in a defined or 0 % — 31.12.2027 irregular shape with an effective butane capacity of 5 g butane / 100 ml or more (according to ASTM D 5228)(1)

0.2987 3805 90 10 Pine oil 1,7 % — 31.12.2029

0.2988 ex 3808 91 90 30 Preparation containing endospores or spores and protein crystals derived from either: 0 % — 31.12.2029 — Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or, — Bacillus thuringiensis subsp. kurstaki or, — Bacillus thuringiensis subsp. israelensis or, — Bacillus thuringiensis subsp. aizawai or, — Bacillus thuringiensis subsp. tenebrionis

0.2983 ex 3808 91 90 40 Spinosad (ISO) 0 % — 31.12.2029

0.5710 ex 3808 91 90 60 Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components 0 % — 31.12.2027 (3’-ethoxy-5,6-dihydro spinosyn J) and (3’-ethoxy- spinosyn L)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 129/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4753 ex 3808 93 90 10 Preparation, in the form of granules, containing by weight: 0 % — 31.12.2029 — 38,8 % or more but not more than 41,2 % of Gibberellin A3, or — 9,5 % or more but not more than 10,5 % of Gibberellin A4 and A7

0.8727 ex 3808 93 90 70 Preparation in the form of powder, containing by weight 90 % or more of Gibberellin A4 and 0 % — 31.12.2029 Gibberellin A7 combined (CAS RN 8030-53-3)

0.6532 ex 3808 94 20 30 Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing: 0 % — 31.12.2029 — 1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5), — 1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5), — 1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and/or — 1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)

0.8904 *ex 3808 99 90 30 Milbemycin oxime (CAS RN 129496-10-2), mixture of methyl analogue and ethyl analogue, 0 % — 31.12.2030 with a purity by weight of 95 % or more

0.8830 ex 3809 91 00 20 Aqueous antimony pentoxide mixture containing by weight: 0 % — 31.12.2029 — 48 % or more but not more than 55 % of antimony pentoxide (CAS RN 1314-60-9), — 1 % or more but not more than 5 % of triethanolamine (CAS RN 102-71-6) 130/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4510 ex 3811 19 00 10 Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl 0 % — 31.12.2029 manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more

than: — 4,9 % of 1,2,4-trimethyl-benzene, — 4,9 % of naphthalene, and — 0,5 % of 1,3,5-trimethyl-benzene

0.3448 ex 3811 21 00 10 Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils 0 % — 31.12.2029

0.7223 ex 3811 21 00 11 Dispersing agent and oxidation inhibitor containing: 0 % — 31.12.2029 — o-amino polyisobutylenephenol (CAS RN 78330-13-9), — more than 30 % by weight but not more than 50 % by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils(1)

0.6904 *ex 3811 21 00 12 Dispersing agent containing: 0 % — 31.12.2026 — esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9), — 35 % or more but not more than 55 % by weight of mineral oils, and — with a chlorine content of not more than 0,05 % by weight, used in the manufacture of blends of additives for lubricating oils(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 131/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6018 ex 3811 21 00 13 Additives containing: 0 % — 31.12.2027 — borated magnesium (C16-C24) alkylbenzene sulphonates and — mineral oils, having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils(1)

0.6906 *ex 3811 21 00 14 Dispersing agent: 0 % — 31.12.2030 — containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9), — containing 35 % or more but not more than 55 % by weight of mineral oils, — with a chlorine content by weight of not more than 0,05 %, — having a total base number of less than 15, used in the manufacture of blends of additives for lubricating oils(1)

0.6907 *ex 3811 21 00 16 Detergent containing: 0 % — 31.12.2030 — Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol) — 40 % or more but not more than 60 % by weight of mineral oils and — having a total base number more than 120 used in the manufacture of blends of additives for lubricating oils(1) 132/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6430 ex 3811 21 00 19 Additives containing: 0 % — 31.12.2029 — a polyisobutylene succinimide based mixture, and — more than 30 % but not more than 50 % by weight of mineral oils, having a total base number of more than 40, for use in the manufacture of lubricating oils(1)

0.3449 ex 3811 21 00 20 Additives for lubricating oils, based on complex organic molybdenum compounds, in the 0 % — 31.12.2029 form of a solution in mineral oil

0.8583 ex 3811 21 00 21 Additive containing by weight: 0 % — 31.12.2028 — 90 % or more but not more than 97 % of reaction products of butyl-cyclohex-3-enecarboxylate and sulphur (CAS RN 160305-95-3), — 3 % or more but not more than 10 % of mineral oil, for use in the manufacture of blends of additives for lubricating oils(1)

0.8196 ex 3811 21 00 22 Additive consisting essentially of: 0 % — 31.12.2026 — Polyisobutenyl succinic anhydride (CAS RN 192662-34-3) reaction product with N, N-diethylaminoethanol (CAS RN 100-37-8), — 25 % or more by weight, but not more than 40 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 133/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8197 ex 3811 21 00 24 Additive consisting essentially of: 0 % — 31.12.2026 — Polyisobutenyl succinic anhydride reaction product with polyethylenepolyamines, borated (CAS RN 134758-95-5), with a chlorine content by weight of 0,05 % or more but not more than 0,25 % and a total base number (TBN) of more than 20, — 45 % and more by weight and no more than 55 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils(1)

0.6012 ex 3811 21 00 25 Additives containing: 0 % — 31.12.2029 — a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl] methacrylamide, of an average molecular weight (Mw) of more than 10 000 but not more than 20 000, and — more than 15 %, but not more than 30 % by weight of mineral oils, for use in the manufacture of lubricating oils(1)

0.8198 ex 3811 21 00 26 Additive consisting essentially of: 0 % — 31.12.2026 — Phosphorodithioic acid, mixed O,O-bis (1,3-dimethylbutyl and isopropyl) esters, zinc salts (CAS RN 84605-29-8), — 7 % or more by weight but not more than 12 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils(1) 134/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6022 ex 3811 21 00 27 Additives containing: 0 % — 31.12.2029 — 10 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, and — mineral oils, for use in the manufacture of lubricating oils(1)

0.8199 ex 3811 21 00 28 Additive consisting essentially of: 0 % — 31.12.2026 — Zinc bis(O,O-bis(2-ethylhexyl)) bis (dithiophosphate) (CAS RN 4259-15-8); — triphenyl phosphite (CAS RN 101-02-0) more than 0,5 % by weight but not more than 6 % by weight, — O,O,O-triphenyl phosphorothioate (CAS RN 597-82-0) more than 0,5 % by weight but not more than 6 % by weight, and not more than 7,5 % by weight of the combination of triphenylphosphorus compounds — 10 % or more by weight but not more than 20 % by weight of mineral oils, used in the manufacture of blends of additives for lubricating oils(1)

0.5727 ex 3811 21 00 29 Additive containing by weight: 0 % — 31.12.2027 — 25 % or more but not more than 40 % of calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0), — 30 % or more but not more than 65 % of mineral oils, for use in the manufacture of blends of additives for lubricating oils(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 135/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5717 ex 3811 21 00 30 Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction 0 % — 31.12.2027 products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process

0.8201 ex 3811 21 00 32 Additive consisting essentially of: 0 % — 31.12.2026 — Zinc O,O,O',O'-tetrakis (1,3-dimethylbutyl) bis(phosphorodithioate) (CAS RN 2215-35-2), — 4 % or more by weight but not more than 12 % by weight of mineral oil, used in the manufacture of blends of additives for lubricating oils(1)

0.6013 ex 3811 21 00 33 Additives containing: 0 % — 31.12.2029 — calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and — mineral oils, having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils(1)

0.6905 *ex 3811 21 00 34 Detergent containing: 0 % — 31.12.2030 — benzenesulfonic acid, methyl-, mono-C20-24-branched alkyl derivs., calcium salts (CAS RN 722503-68-6), — more than 30 % but not more than 60 % by weight of mineral oils, and, — having a total base number of more than 310 but not more than 340, used in the manufacture of blends of additives for lubricating oils(1) 136/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6016 ex 3811 21 00 37 Additives containing: 0 % — 31.12.2029 — a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, and — more than 50 % but not more than 75 % by weight of mineral oils, for use in the manufacture of lubricating oils(1)

0.6435 ex 3811 21 00 48 Additives containing: 0 % — 31.12.2029 — overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) and — by weight more than 25 % but not more than 50 % of mineral oils, — having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils or for use in the manufacture of blends of additives for lubricating oils(1)

0.6437 ex 3811 21 00 53 Additives containing: 0 % — 31.12.2029 — overbased calcium petroleum sulphonates (CAS RN 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and — by weight more than 40 % but not more than 60 % of mineral oils, having a total base number of 280 or more but not more than 420, for use in the manufacture of lubricating oils(1)

0.6434 ex 3811 21 00 55 Additives containing: 0 % — 31.12.2029 — low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8) and — by weight more than 40 % but not more than 60 % of mineral oils, having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 137/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5724 ex 3811 21 00 60 Additives for lubricating oils, containing mineral oils, 0 % — 31.12.2027 — based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %, — with a total base number (TBN) of 280 or more but not more than 320, used as a concentrated additive for the manufacture of engine oils through a blending process

0.6431 ex 3811 21 00 63 Additives containing: 0 % — 31.12.2029 — an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 % and — by weight more than 40 % but not more than 60 % of mineral oils, having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils(1)

0.6429 ex 3811 21 00 65 Additives containing: 0 % — 31.12.2029 — a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), and — more than 35 % but not more than 50 % by weight of mineral oils, having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils(1) 138/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5711 ex 3811 21 00 70 Additives for lubricating oils, 0 % — 31.12.2027 — containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), — containing mineral oils, — with a chlorine content by weight of 0,05 % or more but not more than 0,25 %, — with a total base number (TBN) of more than 20, used as a concentrated additive for the manufacture of engine oils through a blending process

0.6017 ex 3811 21 00 73 Additives containing: 0 % — 31.12.2029 — borated succinimide compounds (CAS RN 134758-95-5), — mineral oils, and — having a total base number (TBN) greater than 40, for use in the manufacture of additive mixtures for lubricating oils(1)

0.6671 ex 3811 21 00 75 Additives containing: 0 % — 31.12.2027 — Calcium (C10-C14) dialkylbenzenesulfonates, — more than 40 %, but not more than 60 % by weight of mineral oils, with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 139/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6669 ex 3811 21 00 77 Antifoam additives consisting of: 0 % — 31.12.2027 — a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and — more than 50 % but not more than 80 % by weight of mineral oils, for use in the manufacture of additive blends for lubricating oils(1)

0.6666 ex 3811 21 00 80 Additives containing: 0 % — 31.12.2027 — polyisobutylene aromatic polyamine succinimide, — more than 40 % but not more than 60 % by weight of mineral oils, with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils(1)

0.6498 ex 3811 21 00 83 Additives containing: 0 % — 31.12.2029 — polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), — more than 31,9 % but not more than 43,3 % by weight of mineral oils, — not more than 0,05 % by weight chlorine, and — having a total base number (TBN) greater than 20, for use in the manufacture of additives blends for lubricating oils(1)

0.5718 ex 3811 21 00 85 Additives: 0 % — 31.12.2027 — containing more than 20 % but not more than 45 % by weight of mineral oils, — based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated, for use in the manufacture of blends of additives(1) 140/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5721 ex 3811 29 00 20 Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl) 0 % — 31.12.2027 dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils

0.8655 ex 3811 29 00 23 Additive for lubricating oils consisting of molybdenum, bis(dibutylcarbamodithioato) 0 % — 31.12.2028 di-μ-oxodioxodi-, sulfurized (CAS RN 68412-26-0)

0.5723 ex 3811 29 00 30 Additives for lubricating oils, consisting of reaction products of 0 % — 31.12.2027 butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process

0.5719 ex 3811 29 00 33 Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides 0 % — 31.12.2027 with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used in the manufacture of blends of additives for lubricating oils(1)

0.6432 ex 3811 29 00 38 Additives consisting of the C12-C14-tert-alkylamine salts of the esters of C14-C18 saturated 0 % — 31.12.2029 and C18 unsaturated alcohols with phosphorus pentoxide (CAS RN 1471315-74-8), for use in the manufacture of blends of additives for lubricating oils or greases(1)

0.5728 ex 3811 29 00 40 Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with 0 % — 31.12.2027 sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 141/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6433 ex 3811 29 00 43 Reaction products of C14-C18 (branched and linear) and C18 (unsaturated) fatty acids with 0 % — 31.12.2029 tetraethylenepentamine (linear, branched, cyclic) (CAS RN 68784-17-8), for use in the manufacture of lubricating oils(1)

0.6436 ex 3811 29 00 45 Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate 0 % — 31.12.2029 (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils(1)

0.6020 ex 3811 29 00 48 Mixed C12-C20-alkyl and C14-C18-unsaturated alkyl derivates of phosphonic acid 0 % — 31.12.2029 (CAS RN 93925-25-8), containing by weight more than 80 % of oleyl, palmityl and stearyl groups, for use in the manufacture of lubricating oils(1)

0.7205 ex 3811 29 00 75 Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio) 0 % — 31.12.2029 propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils(1)

0.6023 ex 3811 29 00 85 Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, 0 % — 31.12.2029 C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils(1)

0.5565 ex 3811 90 00 40 Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by 0 % — 31.12.2027 weight 10 % or more but not more than 29,9 % of 2-ethylhexanol 142/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7204 ex 3811 90 00 50 Corrosion inhibitor containing: 0 % — 31.12.2026 — polyisobutenyl succinic acid and — more than 5 % and not more than 20 % by weight of mineral oils for use in the manufacture of blends of additives for fuels(1)

0.5147 ex 3812 10 00 10 Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7) 0 % — 31.12.2026

0.8962 *ex 3812 10 00 30 Vulcanization accelerator, consisting by weight of: 0 % — 31.12.2030 — 98 % or more of N-tert-butyl bis(2-benzothiazolesulfen) amide (CAS RN 3741-80-8) — not more than 2 % of white mineral oil (CAS RN 8042-47-5)

0.6045 ex 3812 20 90 10 Plasticiser, containing: 0 % — 31.12.2029 — bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2) — more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0)

0.8872 ex 3812 39 90 23 UV stabilizer, containing by weight: 0 % — 31.12.2029 — more than 97 % but not more than 99,8 % of bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8) and — more than 0,2 % but not more than 2 % of triisopropanolamine (CAS RN 122-20-3)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 143/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6055 ex 3812 39 90 25 UV photo stabiliser containing: 0 % — 31.12.2029 — α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω- hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2);

— α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω- [3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1);

— polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3) — bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), and — methyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7)

0.8806 ex 3812 39 90 28 UV stabilizer based on a mixture of 0 % — 31.12.2029 — reaction mass of Poly(oxy-1,2-ethanediyl), .alpha.-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1- dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-.omega.-hydroxy- and Poly(oxy-1,2- ethanediyl), .alpha.-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]- 1-oxopropyl]-.omega.-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4- hydroxyphenyl]-1- oxopropoxy] (EC number 400-830-7) with a purity by weight of 60 % or more, but not more than 80 %, and — reaction mass of bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate (CAS RN 1065336-91-5) with a purity by weight of 25 % or more, but not more than 40 % 144/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8807 ex 3812 39 90 33 UV stabilizer based on: 0 % — 31.12.2029 — a mixture of branched and linear C7-C9 alkyl 3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]propionates (CAS RN 127519-17-9) with a content by weight of 40 % or more, but not more than 60 %, and — a mixture of: bis(2,2,6,6-tetramethyl-1-octyloxypiperidin-4-yl)-1,10-decanedioate and 1,8-bis [(2,2,6,6-tetramethyl-4-((2,2,6,6-tetramethyl-1-octyloxypiperidin-4-yl)-decan-1,10-dioyl) piperidin-1-yl)oxy]octane (CAS RN 129757-67-1) with a content by weight of 40 % or more, but not more than 60 %

0.6054 ex 3812 39 90 35 Mixture containing by weight: 0 % — 31.12.2029 — 25 % or more but not more than 55 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9) — not more than 20 % of other organic compounds — on a carrier of polypropylene (CAS RN 9003-07-0) or amorphous silica (CAS RN 7631-86-9 or 112926-00-8)

0.8864 ex 3812 39 90 38 UV stabiliser containing by weight: 0 % — 31.12.2029 — 75 % or more but not more than 95 % of the reaction product of 2-(4,6-bis (2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-hydroxyphenol with ((C10-16, rich in C12-13 alkyloxy) methyl) oxyrane — 5 % or more but not more than 25 % of 1-methoxy-2-propanol (CAS RN 107-98-2)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 145/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4861 ex 3812 39 90 40 Mixture of: 0 % — 31.12.2029 — 80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4), and — 20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl] thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3)

0.8870 ex 3812 39 90 43 Reaction mass containing by weight: 0 % — 31.12.2029 — more than 45 % but not more than 49 % of Octyl 3-[3-tert-butyl-4-hydroxy-5-(5-chloro-2H-benzotriazol-2-yl)phenyl]propionate (CAS RN 83044-89-7), and — more than 49 % but not more than 53 % of 2-Ethylhexyl 3-[3-tert-butyl-4-hydroxy-5-(5-chloro-2H-benzotriazol-2-yl) phenyl]propionate (CAS RN 83044-90-0)

0.8273 ex 3812 39 90 45 2-Aminoethanol reaction products with cyclohexane and peroxidized 0 % — 31.12.2026 N-butyl-2,2,6,6-tetramethyl-4-piperidinamine-2,4,6-trichloro-1,3,5-triazine reaction products (CAS RN 191743-75-6) with a purity by weight of 99 % or more

0.3444 ex 3812 39 90 48 UV stabilizer (CAS RN 129757-67-1), reaction mass containing by weight 97 % or more of: 0 % — 31.12.2029 — bis[2,2,6,6-tetramethyl-1-(octyloxy)piperidin-4-yl] decanedioate, and — 1,1'-bis[2,2,6,6-tetramethyl-1-(octyloxy)piperidin-4-yl] 10,10'-{octane-1,8-diylbis[oxy (2,2,6,6- tetramethylpiperidine-1,4-diyl)]} didecanedioate 146/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8366 ex 3812 39 90 53 Light stabilizer, containing by weight more than 90 % of reaction products of stearate methyl 0 % — 31.12.2027 ester with 1-(2-hydroxy-2-methylpropoxy)-2,2,6,6-tetramethyl-4-piperidinol (CAS RN 300711-92-6)

0.5477 ex 3812 39 90 55 UV-stabilizer, containing: 0 % — 31.12.2026 — 2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) and — either N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) or — N,N’-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)

0.5483 ex 3812 39 90 65 Stabiliser for plastic material containing: 0 % — 31.12.2026 — 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4), — 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl] thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and — 2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)

0.8533 ex 3812 39 90 75 UV stabilizer containing a mixture of: 0 % — 31.12.2028 — branched and linear C7 to C9 alkyl esters of [3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxy]-1-phenylpropanoic acid (CAS RN 127519-17-9) with a content by weight of 85 % or more, and — 2-Methoxy-1-methylethyl acetate (CAS RN 108-65-6) with a content by weight of not more than 8 %

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 147/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5822 ex 3812 39 90 80 UV-stabilizer, consisting of: 0 % — 31.12.2027 — a hindered amine: N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) and — either an o-hydroxyphenyl triazine UV light absorber or — a chemically modified phenolic compound

0.3731 ex 3814 00 90 40 Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or 0 % — 31.12.2029 nonafluorobutyl ethyl ether

0.2800 ex 3815 12 00 10 Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 0 % — 31.12.2029 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver

0.5508 ex 3815 19 90 10 Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic 0 % — 31.12.2026 compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method)

0.3435 ex 3815 19 90 30 Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the 0 % — 31.12.2029 manufacture of polypropylene(1) 148/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8745 ex 3815 19 90 55 Components for a catalyst system, imported as single components or as set, made up of at 0 % — 31.12.2029

least one of the following preparations: — ceramic material (CAS RN 66402-68-4), — molybdenum oxide and nickel oxide supported on aluminium oxide, — molybdenum oxide, nickel oxide and aluminium phosphate supported on aluminium oxide, — molybdenum oxide, nickel oxide, aluminium phosphate, silica, and molybdenum supported on aluminium oxide, for use against organic and inorganic impurities in kerosene production(1)

0.2791 ex 3815 19 90 70 Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on 0 % — 31.12.2029 a support of silicon dioxide

0.2790 ex 3815 19 90 75 Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on 0 % — 31.12.2029 a support of silicon dioxide

0.2793 ex 3815 19 90 80 Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on 0 % — 31.12.2029 a support of silicon dioxide, in the form of a suspension in mineral oil

0.2788 ex 3815 19 90 85 Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, 0 % — 31.12.2029 fixed on a support of silicon dioxide, in the form of powder

0.3899 ex 3815 19 90 86 Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the 0 % — 31.12.2029 manufacture of polyolefins(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 149/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4005 ex 3815 90 90 16 Initiator based on dimethylaminopropyl urea 0 % — 31.12.2027

0.5062 *ex 3815 90 90 30 Catalyst, consisting of a suspension in mineral oil of: 0 % — 31.12.2026 — tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, and — silicon dioxide, — containing 6,6 % (± 0,6 %) by weight of magnesium, and — containing 2,3 % (± 0,2 %) by weight of titanium

0.7998 *ex 3815 90 90 38 Photoinitiator, containing by weight: 0 % — 31.12.2030 — 80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl) butanoylphenyl]piperazine]propionate (CAS RN 886463-10-1), — not more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl) butanoylphenyl]piperazine]propionate

0.7243 ex 3815 90 90 43 Catalyst in powder form consisting by weight of 0 % — 31.12.2027 — 92,50 % (± 2) % titanium dioxide (CAS RN 13463-67-7), — 5 % (± 1) % silicon dioxide (CAS RN 112926-00-8), and — 2,5 % (± 1,5) % sulphur trioxide (CAS RN 7446-11-9)

0.7999 *ex 3815 90 90 48 Photoinitiator containing by weight: 0 % — 31.12.2030 — 88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly (oxy-1,2-ethanediyl) (CAS RN 1246194-73-9), — not more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (CAS RN 1648797-60-7) 150/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3433 ex 3815 90 90 50 Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane 0 % — 31.12.2029 containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium

0.8840 ex 3815 90 90 55 Catalytic Additives for fluid catalytic cracking (FCC), not containing Y type zeolite 0 % — 31.12.2029 (CAS RN 308079-79-0), and not being a FCC (Fluid Catalytic Cracking) base catalyst, in the form of powder, consisting of a mixture of one or more of the following active substances:

— calcium carbonate (CAS RN 471-34-1), — copper oxide (CAS RN 1217-38-0), — iron oxide (CAS RN 1309-37-1), — aluminium magnesium vanadium oxide (CAS RN 70621-8-0), — vanadium pentoxide (CAS RN 1314-62-1), — aluminium phosphate (CAS RN 7784-30-7), — cerium oxide (CAS RN 1306-38-3), — ZSM-5 type zeolite (CAS RN 308081-08-5),

and one or more of the following inert substances: — magnesium oxide (CAS RN 1309-48-8), — aluminium oxide (CAS RN 1344-28-1), — kaolin (CAS RN 1332-58-7)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 151/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8940 *ex 3815 90 90 58 1,1′-Bis(4-triethylsilylphenyl)methylene(cyclopentadienyl)(2,7-di-tert-butyl-9-fluorenyl) 0 % — 31.12.2030 dimethylhafnium (CAS RN 264926-41-2) in the form of a hexane (CAS RN 110-54-3) solution, containing by weight 2,0 % or more but not more than 2,5 % of 1,1′-bis (4-triethylsilylphenyl)methylene(cyclopentadienyl)(2,7-di-tert-butyl-9-fluorenyl) dimethylhafnium

0.2783 *ex 3815 90 90 80 Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of 0 % — 31.12.2026 a solution in isobutanol

0.3430 ex 3815 90 90 81 Catalyst, containing by weight 69 % or more but not more than 79 % of 0 % — 31.12.2029 (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate (CAS RN 62314-22-1)

0.2782 ex 3815 90 90 85 Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for 0 % — 31.12.2027 the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins(1)

0.3732 ex 3815 90 90 88 Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight 0 % — 31.12.2029 on an oil- and hexane-free basis: — 4 % or more but not more than 10 % of titanium and — 10 % or more but not more than 20 % magnesium

0.3733 ex 3815 90 90 89 Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or 0 % — 31.12.2026 in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile(1) 152/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4408 *ex 3817 00 50 10 Mixture of alkylbenzenes (C14-26) containing by weight: 0 % — 31.12.2026 — 35 % or more but not more than 60 % of eicosylbenzene, — 25 % or more but not more than 50 % of docosylbenzene, — 5 % or more but not more than 25 % of tetracosylbenzene

0.3427 ex 3817 00 80 10 Mixture of alkylnaphthalenes, containing by weight: 0 % — 31.12.2029 — 88 % or more but not more than 98 % of hexadecylnaphthalene — 2 % or more but not more than 12 % of dihexadecylnaphthalene

0.4581 ex 3817 00 80 20 Mixture of branched alkyl benzenes mainly containing dodecyl benzenes 0 % — 31.12.2029

0.5479 ex 3817 00 80 30 Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 0 % — 31.12.2026 56 carbon atoms

0.6038 ex 3823 19 30 20 Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or 0 % — 31.12.2027

more for use in the manufacture of: ex 3823 19 30 30 — industrial monocarboxylic fatty acids of heading 3823, — stearic acid of heading 3823, — stearic acid of heading 2915, — palmitic acid of heading 2915, or — animal feed preparations of heading 2309(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 153/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6037 ex 3823 19 90 20 Palm acid oils from refining for use in the manufacture of: 0 % — 31.12.2027 ex 3823 19 90 30 — industrial monocarboxylic fatty acids of heading 3823, — stearic acid of heading 3823, — stearic acid of heading 2915, — palmitic acid of heading 2915, or — animal feed preparations of heading 2309(1)

0.8365 *ex 3824 99 92 22 Solution containing: 3,2 % — 31.12.2026 — 30 % or more but not more than 40 % by weight of lithium hexafluorophosphate (CAS RN 21324-40-3), and — 60 % or more but not more than 70 % by weight of ethyl methyl carbonate (CAS RN 623-53-0), or dimethyl carbonate (CAS RN 616-38-6)

0.6810 *ex 3824 99 92 23 Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and 0 % — 31.12.2030 propan-2-ol

0.8835 ex 3824 99 92 25 Mixture containing by weight: 0 % — 31.12.2029 — 55 % or more but not more than 65 % of (2S,3S,4S,5R,6R)-2-(((2R,3R,5S,6R)-4-(((2R,3S,4S,5R,6R)-3-acetoxy-4,5-bis

(benzyloxy)-6-((benzyloxy)methyl)tetrahydro-2H-pyran-2-yl)oxy)-3,5-bis

(benzyloxy)-6-(4-methoxy-4-oxobutoxy)tetrahydro-2H-pyran-2-yl) methoxy)-6-((((2S,3S,4S,5R,6R)-3-acetoxy-4,5-bis(benzyloxy)-6-((benzyloxy)methyl) tetrahydro-2H-pyran-2-yl)oxy)methyl)tetrahydro-2H-pyran-3,4,5-triyl tribenzoate (CAS RN 1233475-58-5), — 35 % or more but not more than 45 % of toluene (CAS RN 108-88-3) 154/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8921 *ex 3824 99 92 27 Methyl 5-(dimethylamino)-2-methyl-5-oxopentanoate (CAS RN 1174627-68-9) with a purity 0 % — 31.12.2030 by weight of 75 % or more

0.8886 ex 3824 99 92 28 Preparation containing by weight: 0 % — 31.12.2029 — 30 % or more, but not more than 60 % of 3a,4,4a,5,8,8a,9,9a-octahydro-4,9:5,8-dimethano-1H-benz[f]indene (CAS RN 7158-25-0), — 10 % or more, but not more than 50 % of 3a,4,7,7a-tetrahydro-4,7-methanoindene (CAS RN 77-73-6), and — whether or not 10 % or more, but not more than 40 % of petroleum hydrocarbon resin (CAS RN 68132-00-3)

0.4909 *ex 3824 99 92 29 Preparation containing by weight: 0 % — 31.12.2030 — 85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and — 1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate

0.8955 *ex 3824 99 92 30 Mixture of C10-C14 tert-alkyl amines (EC number: 701-175-2) 0 % — 31.12.2030

0.3083 ex 3824 99 92 33 Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: 0 % — 31.12.2029 ex 3824 99 93 40 — on a support of mineral wax, whether or not modified chemically, or ex 3824 99 96 40 — in the form of a solution in an organic solvent

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 155/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4523 ex 3824 99 92 37 Mixture of acetates of 3-butene-1,2-diol with a content by weight of 65 % or more of 0 % — 31.12.2029 3-butene-1,2-diol diacetate (CAS RN 18085-02-4)

0.6779 *ex 3824 99 92 40 Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent 0 % — 31.12.2030

0.8706 ex 3824 99 92 44 Mixture, containing by weight: 0 % — 31.12.2029 — 90 % or more but not more than 95 % of cresol ethoxylate (CAS RN 37281-57-5), and — 5 % or more but not more than 10 % of xylenol ethoxylate (CAS RN 61723-82-8)

0.8887 ex 3824 99 92 48 Preparation containing by weight: 0 % — 31.12.2029 — 80 % or more, but not more than 90 % of 3a,4,7,7a-tetrahydro-4,7-methanoindene (CAS RN 77-73-6), and — not more than 10 % of 3a,4,4a,5,8,8a,9,9a-octahydro-1H-4,9:5,8-dimethanocyclopenta[b] naphtalene (CAS RN 7158-25-0), and — 0,5 % or more, but not more than 3 % of 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0)

0.4279 ex 3824 99 92 49 Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate 0 % — 31.12.2027 (CAS RN 169117-72-0)

0.3065 ex 3824 99 92 51 Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl 0 % — 31.12.2029 methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid 156/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7742 *ex 3824 99 92 52 Electrolyte containing: 3,2 % — 31.12.2026 — 5 % or more but not more than 20 % lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9), — 60 % or more but not more than 90 % of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and/or ethyl methyl carbonate (CAS RN 623-53-0), — 0,5 % or more but not more than 20 % 1,3,2-dioxathiolane 2,2-dioxide (CAS RN 1072-53-3), for use in the manufacture of motor vehicle batteries(1)

0.4434 ex 3824 99 92 54 Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average 0 % — 31.12.2026 polymer chain length of less than 5 monomer units (CAS RN 813452-37-8)

0.6025 ex 3824 99 92 55 Additives for paints and coatings, containing: 0 % — 31.12.2028 — a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and — 30 % or more but not more than 35 % by weight of isobutyl alcohol

0.4707 ex 3824 99 92 58 Mixture containing by weight: 0 % — 31.12.2029 — 56 % or more but not more than 85 % of divinylbenzene isomers (CAS RN 1321-74-0) — 15 % or more but not more than 44 % of ethylvinylbenzene isomers (CAS RN 28106-30-1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 157/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5050 *ex 3824 99 92 61 3’,4’,5’-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 0 % — 31.12.2030 80 % or more but not more than 90 % of 3’,4’,5’-trifluorobiphenyl-2-amine

0.7831 ex 3824 99 92 62 Solution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofurane 0 % — 31.12.2029 (CAS RN 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane

0.6720 *ex 3824 99 92 68 Preparation containing by weight: 0 % — 31.12.2030 — 20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9)

Dissolved in: — 10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5) — 64 %(±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and — 6 % (± 1,0 %) Naphthalene (CAS RN 91-20-3)

0.6719 *ex 3824 99 92 69 Preparation containing by weight: 0 % — 31.12.2026 — 80 % or more but not more than 92 % of bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5) — 7 % or more but not more than 20 % oligomers of bisphenol-A bis(diphenyl phosphate) and — not more than 1 % triphenyl phosphate (CAS RN 115-86-6) 158/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4409 ex 3824 99 92 70 Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 0 % — 31.12.2029 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine

0.8471 ex 3824 99 92 73 Tri-C8-10-alkyl amines (CAS RN 68814-95-9) with a purity by weight of 95 % or more 0 % — 31.12.2027

0.8486 ex 3824 99 92 75 Mixture, containing by weight: 3,2 % — 31.12.2027 — 75 % or more of tetrabutyltin (CAS RN 1461-25-2), — not more than 20 % of tributyltin chloride (CAS RN 1461-22-9), — not more than 4 % of dibutyltin dichloride (CAS RN 683-18-1), for use in the production of butyltin compounds, used in glass manufacture and tributyltin chloride used as a catalyst in the pharmaceutical industry(1)

0.8506 ex 3824 99 92 79 Mixture, containing by weight: 3,2 % — 31.12.2027 — tributyltin chloride (CAS RN 1461-22-9) with a purity by weight of 80 % or more, — not more than 5 % tetrabutyltin (CAS RN 1461-25-2), — not more than 6 % dibutyltin dichloride (CAS RN 683-18-1), — not more than 11 % o-xylene (CAS RN 95-47-6), for use in the production of tributyltin chloride used as a catalyst in the pharmaceutical industry(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 159/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7462 ex 3824 99 92 81 Reaction mass of 3- [(diphenoxyphosphoryl)oxy]phenyl triphenyl 1,3-phenylene bis 0 % — 31.12.2028

(phosphate) and tetraphenyl 1,3-phenylene bis(phosphate)

0.6546 ex 3824 99 92 82 T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene 0 % — 31.12.2029

0.8517 ex 3824 99 92 83 1-(Cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9) with a purity by weight of 70 % or more, 0 % — 31.12.2029 but not more than 90 %

0.3074 ex 3824 99 92 84 Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene 0 % — 31.12.2029

(dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and: — either an aluminium-alkyl compound, — or an organic complex of tungsten — or an organic complex of molybdenum

0.8499 ex 3824 99 92 86 Tall oil N,N-dimethyl fatty amides (CAS RN 68308-74-7) with a purity by weight of 99 % or 0 % — 31.12.2027 more

0.3069 *ex 3824 99 92 88 2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1) 0 % — 31.12.2030

0.8083 *ex 3824 99 92 92 Solution consisting of: 0 % — 31.12.2030 — 50 (± 2) % by weight sodium mentholate (CAS RN 19321-38-1), and — 50 (± 2) % by weight light aliphatic solvent naphtha (petroleum) (CAS RN 64742-89-8) 160/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8278 ex 3824 99 92 94 ({[2-(trifluoromethyl)phenyl]carbonyl}amino)methyl acetate (CAS RN 895525-72-1) with 0 % — 31.12.2026 a content of at least 45 % by weight dissolved in N,N-dimethylacetamide (CAS RN 127-19-5)

0.8287 ex 3824 99 92 95 Solution of methyl cis-1-{[(2,5-dimethylphenyl)acetyl] 0 % — 31.12.2026 amino}-4-methoxycyclohexanecarboxylate (CAS RN 203313-47-7) in N,N-dimethylacetamide (CAS RN 127-19-5), containing by weight 25 % or more but not more than 45 % of the carboxylate

0.5961 ex 3824 99 93 30 Powder Mixture containing by weight: 0 % — 31.12.2029 — 85 % or more of zinc diacrylate (CAS RN 14643-87-9), — not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7), and — not more than 10 % of zinc stearate (CAS RN 557-05-1)

0.8714 ex 3824 99 93 31 Reaction mass of dihexadecyl hydrogen phosphate (CAS RN 2197-63-9) and hexadecyl 0 % — 31.12.2029 dihydrogen phosphate (CAS RN 3539-43-3)

0.8498 ex 3824 99 93 33 Preparation containing by weight 0 % — 31.12.2027 — 60 % or more but not more than 70 % of calcium rel-(1R,2S)-cyclohexane-1,2-dicarboxylate (CAS RN 491589-22-1), — 30 % or more but not more than 40 % of zinc stearate (CAS RN 557-05-1), — 1 % or more but not more than 5 % of CI Pigment Blue 29 (CAS RN 57455-37-5) and — 1 % or more but not more than 5 % of CI Pigment Violet 15 (CAS RN 12769-96-9)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 161/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4719 ex 3824 99 93 35 Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8) 0 % — 31.12.2029

0.8497 ex 3824 99 93 36 Preparation containing by weight 60 % or more but not more than 70 % of 0 % — 31.12.2027 calcium rel-(1R,2S)-cyclohexane-1,2-dicarboxylate (CAS RN 491589-22-1) and 30 % or more but not more than 40 % of zinc stearate (CAS RN 557-05-1)

0.4527 ex 3824 99 93 42 Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, 0 % — 31.12.2029 diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea

0.7153 ex 3824 99 93 45 Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by 0 % — 31.12.2026

weight: — not more than 20 % of disodium sulphate, and — not more than 10 % of sodium chloride

0.7786 ex 3824 99 93 48 Nonhalogenated flame retardant containing by weight: 0 % — 31.12.2029 — 50 % or more, but not more than 65 % of piperazine pyrophosphate (CAS RN 66034-17-1), — 35 % or more, but not more than 45 % of a phosphoric acid derivative and — not more than 6 % of zinc oxide (CAS RN 1314-13-2) 162/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6215 ex 3824 99 93 53 Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 0 % — 31.12.2029 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder

0.2939 ex 3824 99 93 61 Disodium 7,7'-(carbonyldiimino)bis(4-hydroxynaphthalene-2-sulphonate) 0 % — 31.12.2028 (CAS RN 20324-87-2) with a purity by weight of 80 % or more

0.4290 ex 3824 99 93 63 Mixture of phytosterols, not in the form of powder, containing by weight: 0 % — 31.12.2027 — 75 % or more of sterols, — not more than 25 % of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters(1)

0.7460 ex 3824 99 93 65 Reaction mass of 1,1'-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy) 0 % — 31.12.2029 benzene] (CAS RN 97416-84-7) and 1,3-dibromo-2-(2,3-dibromo-2-methylpropoxy)-5-{2- [3,5-dibromo-4-(2,3,3-tribromo-2-methylpropoxy)phenyl]propan-2-yl}benzene

0.8371 ex 3824 99 93 74 1,3-Propanediamine, N1,N1'-1,2-ethanediylbis-, reaction products with cyclohexane and 0 % — 31.12.2027 peroxidized N-butyl-2,2,6,6-tetramethyl-4-piperidinamine-2,4,6-trichloro-1,3,5-triazine reaction products (CAS RN 191680-81-6)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 163/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4336 ex 3824 99 93 88 Mixture of phytosterols containing by weight: 0 % — 31.12.2027 — 60 % or more, but not more than 80 % of sitosterols, — less than 15 % of campesterols, — less than 5 % of stigmasterols, and — less than 15 % of betasitostanols

0.3078 ex 3824 99 96 35 Calcined bauxite (refractory grade) 0 % — 31.12.2029

0.8514 ex 3824 99 96 43 2-(Ethylthio)ethanethiol functionalized silicagel with a purity by weight of 98 % or more 0 % — 31.12.2027

0.6628 *ex 3824 99 96 46 Manganese zinc ferrite granulate, containing by weight: 0 % — 31.12.2030 — 52 % or more but not more than 76 % of iron(III)oxide, — 13 % or more but not more than 42 % of manganese oxide, and — 2 % or more but not more than 22 % of zinc oxide

0.6749 *ex 3824 99 96 48 Zirconium oxide (ZrO), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium 0 % — 31.12.2030 2 oxide content by weight of 92 % or more but not more than 97 %

0.5607 ex 3824 99 96 50 Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc 0 % — 31.12.2027 hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators 164/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6145 ex 3824 99 96 55 Carrier in powder form, consisting of: 0 % — 31.12.2029 — ferrite (Iron oxide) (CAS RN 1309-37-1) — manganese oxide (CAS RN 1344-43-0) — magnesium oxide (CAS RN 1309-48-4) — styrene acrylate copolymer to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers(1)

0.5141 ex 3824 99 96 60 Fused magnesia containing by weight 15 % or more of dichromium trioxide 0 % — 31.12.2026

0.8587 ex 3824 99 96 62 Viscous preparation essentially containing: 0 % — 31.12.2028 — by weight more than 5 % but not more than 15 % of poly(vinyl alcohol) (CAS RN 9002-89-5), — by weight more than 10 % but not more than 20 % of 1-methoxy-2-propanol (CAS RN 107-98-2), — water, for use as a protective coating for wafers during the slicing process in the manufacture of semiconductors(1)

0.3050 ex 3824 99 96 65 Aluminium sodium silicate, in the form of spheres of a diameter of: 0 % — 31.12.2029 — either 1,6 mm or more but not more than 3,4 mm, — or 4mm or more but not more than 6 mm

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 165/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8875 ex 3824 99 96 66 Vulcanizing agent containing by weight: 0 % — 31.12.2029 — 78 % or more but not more than 82 % of insoluble sulphur (CAS RN 9035-99-8), — 18 % or more but not more than 22 % of naphthenic oil (CAS RN 64742-52-5), and — not more than 0,2 % of methyl styrene (CAS RN 98-83-9)

0.3119 ex 3824 99 96 73 Reaction product, containing by weight: 0 % — 31.12.2029 — 1 % or more but not more than 40 % of molybdenum oxide, — 10 % or more but not more than 50 % of nickel oxide, — 30 % or more but not more than 70 % of tungsten oxide

0.7010 ex 3824 99 96 74 Mixture with a non-stoichiometric composition: 0 % — 31.12.2026 — with a crystalline structure, — with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm

0.8935 *ex 3824 99 96 78 Zirconium oxide stabilized with yttrium oxide (CAS RN 64417-98-7) containing by weight 0 % — 31.12.2030 90 % or more of zirconium oxide 166/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7147 ex 3824 99 96 80 Mixture consisting of: 0 % — 31.12.2026 — 64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9) — 25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) and — not more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)

0.5820 ex 3824 99 96 87 Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide 0 % — 31.12.2027 (CAS RN 1344-28-1), containing by weight: — 0,1 % or more but not more than 1 % of platinum, and — 0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)

0.6132 ex 3901 10 10 20 High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of 0 % m3 31.12.2029 powder, with ex 3901 40 00 10 — a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and — a density (ASTM D 1505) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 and — a vicat softening temperature of min. 94 °C

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 167/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8378 ex 3901 10 10 50 Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: 0 % — 31.12.2027 ex 3901 40 00 50 — a density (ASTM D 1505) of 0,924 g/cm3 or more but not more than 0,928 g/cm3, — a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and — a peak melting temperature of 120 °C or more but not more than 124 °C

0.8379 ex 3901 10 10 60 Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with: 0 % — 31.12.2029 ex 3901 40 00 60 — a density (ASTM D 1505) of 0,922 g/cm3 or more but not more than 0,926 g/cm3 and — a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min

0.5142 ex 3901 10 90 30 Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper 0 % — 31.12.2026

0.8757 ex 3901 30 00 20 Copolymer of ethylene and vinyl acetate (CAS RN 24937-78-8) 0 % — 31.12.2029 — containing by weight 28 % or more but not more than 49 % of vinyl acetate, — with a melt flow rate of less than 5g/10 min (190 °C/2,16 kg, ASTM D1238), — in the form of pellets 168/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8732 ex 3901 30 00 30 Terpolymer of ethylene, vinyl acetate and methacrylic acid (CAS RN 26375-31-5) 0 % — 31.12.2029

0.6897 *ex 3901 40 00 30 Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst 0 % m3 31.12.2030

method in the form of pellets with: — more than 10 % but not more than 20 % by weight of copolymer, — a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, and — a density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3, for use in the co-extrusion processing of films for flexible food packaging(1)

0.6920 *ex 3901 90 80 53 Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with: 0 % m3 31.12.2030 — an acrylic acid content of 18,5 % or more, but not more than 49,5 % by weight (ASTM D4094), and — a melt flow rate of 10g/10 min or more (125 °C/2,16 kg, ASTM D1238)

0.6734 *ex 3901 90 80 55 Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: 0 % — 31.12.2030 — an acrylic acid content of 6 % or more but not more than 50 % by weight, and — a melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 169/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5049 *ex 3901 90 80 67 Copolymer made exclusively from ethylene and methacrylic acid monomers in which the 0 % — 31.12.2030 methacrylic acid content is 11 % by weight or more

0.6998 ex 3901 90 80 73 Mixture containing by weight 0 % — 31.12.2026 — 80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and — 6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)

0.8739 ex 3901 90 80 75 Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (CAS RN 37433-35-5), in the 0 % — 31.12.2029 form of pellets

0.8736 ex 3901 90 80 85 Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (CAS RN 61843-70-7) in the 0 % — 31.12.2029 form of pellets

0.2902 ex 3901 90 80 91 Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid 0 % — 31.12.2029

0.3906 ex 3901 90 80 92 Chlorosulphonated polyethylene 0 % — 31.12.2029

0.2899 ex 3901 90 80 93 Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the 0 % — 31.12.2029 manufacture of roof sheets(1)

0.3186 ex 3901 90 80 94 Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A 0 % — 31.12.2029 block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene 170/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2898 ex 3901 90 80 97 Chlorinated polyethylene, in the form of powder 0 % — 31.12.2029

0.2895 ex 3902 10 00 20 Polypropylene, containing no plasticiser, 0 % — 31.12.2029 — of a melting point of more than 150 °C (as determined by the ASTM D 3417 method), — of a heat of fusion of 15 J/g or more but not more than 70 J/g, — of an elongation at break of 1 000 % or more (as determined by the ASTM D 638 method), — of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)

0.3179 ex 3902 20 00 20 Hydrogenated polyisobutene, in liquid form 0 % — 31.12.2029

0.8125 *ex 3902 30 00 20 Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by 0 % — 31.12.2030 weight less than 37 % of styrene

0.8232 ex 3902 30 00 30 Hydrogenated copolymer of styrene, isoprene and butadiene, containing by weight 28 % or 0 % — 31.12.2026 more, but not more than 55 % of propylene

0.5143 ex 3902 30 00 95 A-B-A block copolymer, consisting of: 0 % — 31.12.2026 — a copolymer of propylene and ethylene and — 21 % (± 3 %) by weight of polystyrene

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 171/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5138 ex 3902 30 00 97 Liquid ethylene-propylene-copolymer with: 0 % — 31.12.2026 — a flashpoint of 250 °C or more, — a viscosity index of 150 or more, — of a number average molecular weight (M) of 650 or more n

0.4768 ex 3902 90 90 60 Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics: 0 % — 31.12.2029 — liquid at room temperature — obtained by cationic polymerisation of C-5 alkenes monomers — with a number average molecular weight (Mn) of 370 (± 50) — with a weight average molecular weight (Mw) of 500 (± 100)

0.7950 *ex 3902 90 90 65 Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content 0 % — 31.12.2030 of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to

Chapter 39

0.4040 ex 3902 90 90 70 Synthetic poly-alpha-olefin with a viscosity of 3 or more but not more than 9 centistokes 0 % — 31.12.2026 (measured at 100 o Celsius according to the ASTM D 445 method), obtained by

polymerization of dodecene with or without: — not more than 40 % by weight of tetradecene and/or — not more than 2 % by weight decene and/or — not more than 2 % by weight of hexadecene 172/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6214 ex 3902 90 90 94 Chlorinated polyolefins, whether or not in a solution or dispersion 0 % — 31.12.2029

0.4166 ex 3903 19 00 40 Crystalline polystyrene with: 0 % — 31.12.2026 — a melting point of 268 °C or more but not more than 272 °C — a setting point of 232 °C or more but not more than 247 °C, — whether or not containing additives and filling material

0.5176 ex 3903 90 90 20 Copolymer in the form of granules containing by weight: 0 % — 31.12.2026 — 83 ± 3 % styrene, — 7 ± 2 % n-butyl acrylate, — 9 ± 2 % n-butyl methacrylate and — 0,01 % or more but not more than 1 % of polyolefinic wax

0.2891 ex 3903 90 90 35 Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 °C 0 % — 31.12.2029 ex 3911 90 99 43

0.7417 ex 3903 90 90 38 Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene 0 % — 31.12.2027 copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1 %) ex 3904 69 80 88

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 173/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8415 ex 3903 90 90 43 Mixture of polymers consisting by weight of: 0 % — 31.12.2027 — 10 % or more but not more than 30 % of a styrene-ethylene-butylene-styrene block copolymer (CAS RN 66070-58-4), — 25 % or more but not more than 45 % of mineral oil (CAS RN 8042-47-5), — 25 % or more but not more than 45 % of calcium carbonate (CAS RN 1317-65-3), — 10 % or more but not more than 20 % of polypropylene (CAS RN 9003-07-0), and — 1 % or more but not more than 3 % of a copolymer of α-methylstyrene and vinyltoluene (CAS RN 9017-27-0)

0.5473 ex 3903 90 90 60 Copolymer of styrene with maleic anhydride, either partially esterified or completely 0 % — 31.12.2026 chemically modified, in flake or powder form ex 3911 90 99 60

0.6804 *ex 3903 90 90 70 Copolymer in the form of granules containing by weight: 0 % m3 31.12.2030 — 75 % (± 7 %) styrene and — 25 % (± 7 %) methylmethacrylate

0.4410 ex 3903 90 90 86 Mixture containing by weight: 0 % — 31.12.2029 — 45 % or more but not more than 65 % of polymers of styrene, — 30 % or more but not more than 45 % of poly(phenylene ether), and — not more than 11 % of additives 174/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2885 ex 3904 61 00 20 Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 0 % — 31.12.2029 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions

0.7675 ex 3904 69 80 20 Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2) 0 % — 31.12.2029

0.7626 ex 3904 69 80 30 Copolymer of tetrafluoroethylene, hexafluoropropene and ethene 0 % — 31.12.2029

0.5560 ex 3904 69 80 85 Copolymer of ethylene and chlorotrifluoroethylene, whether or not modified with 0 % — 31.12.2027 hexafluoroisobutylene, whether or not containing fillers

0.2883 ex 3904 69 80 96 Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 39 0 % — 31.12.2029

0.3745 ex 3904 69 80 97 Copolymer of chlorotrifluoroethylene and vinylidene difluoride 0 % — 31.12.2029

0.8414 ex 3905 91 00 35 Aqueous solution of a copolymer of vinylpyrrolidone and N,N-dimethylaminopropyl 0 % — 31.12.2027 methacrylamide sulfate (CAS RN 175893-71-7), containing by weight 8 % or more, but not more than 12 % of copolymer

0.5774 ex 3905 91 00 40 Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by 0 % — 31.12.2027 weight not more than 38 % of the monomer unit ethylene

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 175/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8126 *ex 3905 91 00 50 Aqueous solution consisting by weight of: 0 % — 31.12.2030 — 10 % or more but not more than 20 % of a copolymer of vinyl pyrrolidone, N, N-dimethylaminopropyl methacrylamide and 3 (methacryloylamino) propyllauryldimethylammonium chloride (CAS RN 306769-73-3), — not more than 1 % preservatives

0.8145 *ex 3905 91 00 60 Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate 0 % — 31.12.2030 (CAS RN 102972-64-5) in solid form, or as an aqueous solution containing by weight:

— 27 % or more but not more than 33 % of copolymer, — not more than 1,5 % of ethanol (CAS RN 64-17-5), — not more than 1 % of preservatives

0.8138 *ex 3905 91 00 70 Aqueous solution, containing by weight: 0 % — 31.12.2030 — 25 % or more but not more than 35 % of a copolymer of vinyl caprolactam, vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3-(methacryloylamino) propyllauryldimethylammonium chloride (CAS RN 748809-45-2), — 10 % or more but not more than 16 % of ethanol (CAS RN 64-17-5) whether or not denatured with tert-butyl alcohol (CAS RN 75-65-0) and/or denatonium benzoate (CAS RN 3734-33-6)

0.8139 *ex 3905 91 00 80 Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (CAS RN 83120-95-0) 0 % — 31.12.2030 176/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3282 *ex 3905 99 90 30 Povidone (INN) iodine (CAS RN 25655-41-8) with a purity by weight of 92 % or more 0 % — 31.12.2029

0.3283 ex 3905 99 90 95 Hexadecylated or eicosylated polyvinylpyrrolidone 0 % — 31.12.2029

0.2880 ex 3905 99 90 96 Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of 0 % — 31.12.2029 a weight average molecular weight (M ) of 25 000 or more but not more than 150 000 and w

containing by weight: — 9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and — 5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol

0.3278 ex 3905 99 90 98 Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % 0 % — 31.12.2029 or more but not more than 82 % of triacontyl groups

0.3276 3906 90 60 Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal 0 % — 31.12.2029 carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide

0.7347 ex 3906 90 90 23 Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene 0 % — 31.12.2027 (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm

0.6672 *ex 3906 90 90 33 Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or 0 % — 31.12.2030 more but not more than 10 μm

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 177/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7125 ex 3906 90 90 43 Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes 0 % — 31.12.2026 (CAS RN 143106-82-5)

0.2886 ex 3906 90 90 50 Polymers of esters of acrylic acid with one or more of the following monomers in the chain: 0 % — 31.12.2029 — chloromethyl vinyl ether, — chloroethyl vinyl ether, — chloromethylstyrene, — vinyl chloroacetate, — methacrylic acid, — butenedioic acid monobutyl ester, — butenedioic acid monocyclohexyl ester, containing by weight not more than 5 % of each monomer unit

0.8579 ex 3906 90 90 58 Mixture of polymers, containing by weight: 0 % — 31.12.2028 — 77 % or more but not more than 81 % of polyacrylamide (CAS RN 9003-05-8), — 18 % or more but not more than 21 % of polyethylene glycol (CAS RN 25322-68-3)

0.7499 ex 3906 90 90 60 Aqueous dispersion containing by weight: 0 % — 31.12.2029 — more than 10 % but not more than 15 % of ethanol, and — more than 7 % but not more than 11 % of a reaction product of poly (epoxyalkylmethacrylate-co-divinylbenzene) with a glycerol derivative 178/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8828 ex 3906 90 90 71 Acrylonitrile-styrene-acrylate copolymer in the form of granules containing by weight: 0 % — 31.12.2029 — 48 % of styrene, — 22 % of acrylonitrile, — 29 % of butylacrylate, and — 1 % of dihydrodicyclopentadienyl acrylate

0.6425 ex 3906 90 90 73 Preparation containing by weight: 0 % — 31.12.2029 — 33 % or more but not more than 37 % of butyl methacrylate - methacrylic acid copolymer, — 24 % or more but not more than 28 % of propylene glycol, and — 37 % or more but not more than 41 % of water

0.3272 ex 3907 29 11 10 Poly(ethylene oxide) of a number average molecular weight (M) of 100 000 or more 0 % — 31.12.2029 n

0.4378 ex 3907 29 11 20 Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, 0 % — 31.12.2029 of a number average molecular weight (M) of 40 000 n

0.8882 ex 3907 29 11 30 Mixture containing by weight: 0 % — 31.12.2029 — 75 % or more of polyethyleneglycol modified butyl-2-cyano-3-(4-hydroxy-3-methoxyphenyl) acrylate, with an ethylene oxide chain length of not more than 30 (CAS RN 780763-40-8) — not more than 25 % of ethoxylated sorbitan trioleate (CAS RN 9005-70-3)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 179/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8896 ex 3907 29 11 40 Ethoxylated glycerol (CAS RN 31694-55-0) with a hydroxyl number of 541 or more but not 0 % — 31.12.2029 more than 587 (ASTM 4274)

0.7532 ex 3907 29 20 35 Mixture containing by weight: 0 % — 31.12.2029 — 5 % or more but not more than 15 % of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and — 85 % or more but not more than 95 % of a copolymer of sucrose, propylene oxide and ethylene oxide (CAS RN 26301-10-0)

0.4013 ex 3907 29 20 40 Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran (CAS RN 38640-26-5) with 0 % — 31.12.2028 a number average molecular weight (Mn) of 900 or more but not more than 3 600

0.6351 ex 3907 29 20 50 Poly(p-phenylene oxide) in the form of powder with: 0 % — 31.12.2029 — a glass-transition temperature of 210 °C or more, — a weight average molecular weight (Mw) of 35 000 or more but not more than 80 000, — an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram

0.7478 ex 3907 29 99 20 2,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane 0 % — 31.12.2029 (CAS RN 697278-30-1) with a number average molecular weight (Mn) of at least 20 kDa whether or not modified with a chemical entity enabling a linkage between the PEG and a protein or a peptide

0.2920 ex 3907 29 99 30 Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin) 0 % — 31.12.2029 180/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3269 ex 3907 29 99 45 Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy 0 % — 31.12.2029 end-groups

0.4536 ex 3907 29 99 50 Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components 0 % — 31.12.2029 consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient

0.4546 ex 3907 29 99 55 Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average 0 % — 31.12.2029 molecular weight (Mn) of 5 000

0.5144 ex 3907 29 99 60 Polytetramethylene oxide di-p-aminobenzoate 0 % — 31.12.2026

0.8491 ex 3907 29 99 70 Poly(oxy-1,4-phenyleneoxy-1,4-phenylenecarbonyl-1,4-phenylene) (CAS RN 29658-26-2) 0 % — 31.12.2027 containing by weight not more than 35 % of additives

0.2759 ex 3907 30 00 40 Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of 0 % — 31.12.2029 goods of headings 8504, 8533, 8535, 8536, 8541, 8542 or 8548(1)

0.7427 ex 3907 30 00 70 Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) 0 % — 31.12.2027

containing by weight: — 65 % or more but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), and — none or not more than 0,5 % of carbon black (CAS RN 1333-86-4)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 181/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2541 ex 3907 40 00 35 α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene 0 % — 31.12.2029 (3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)

0.2564 ex 3907 40 00 45 α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene) 0 % — 31.12.2029 isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3)

0.3263 ex 3907 69 00 10 Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and 0 % — 31.12.2029 hexane-1,6-diol

0.2980 3907 70 00 Poly(lactic acid) 0 % — 31.12.2029

0.2918 ex 3907 91 90 10 Diallyl phthalate prepolymer, in powder form 0 % — 31.12.2029

0.5639 ex 3907 99 80 25 Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof 0 % — 31.12.2027 and cyclohexanedimethanol

0.4940 *ex 3907 99 80 30 Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate) 0 % — 31.12.2030 ex 3913 90 00 20 182/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7491 ex 3907 99 80 35 Copolymer in form of a clear, pale yellow liquid, consisting of 0 % — 31.12.2029 — phthalic acid isomers and/or aliphatic dicarboxylic acids, — aliphatic diols, and — fatty acid end-caps

with: — a hydroxyl number of 120 mg KOH or more but not more than 350 mg KOH, — a viscosity at 25 °C of 2 000 cPs or more but not more than 8 000 cPs, and — an acid value less than 10 mg KOH/g

0.5057 *ex 3907 99 80 80 Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives 0 % — 31.12.2030 thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles

0.2923 ex 3908 90 00 10 Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned 0 % — 31.12.2029 in note 6 (b) to Chapter 39

0.7428 ex 3909 20 00 10 Polymer mixture, containing by weight: 0 % — 31.12.2027 — 60 % or more but not more than 75 % of melamine resin (CAS RN 9003-08-1), — 15 % or more but not more than 25 % of silicon dioxide (CAS RN 14808-60-7 or 60676-86-0), — 5 % or more but not more than 15 % of cellulose (CAS RN 9004-34-6), and — 1 % or more but not more than 15 % of phenolic resin (CAS RN 25917-04-8)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 183/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6423 ex 3909 50 90 20 Preparation containing by weight: 0 % — 31.12.2029 — 14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups, — 3 % or more but not more than 5 % of enzymatically modified starch, and — 77 % or more but not more than 83 % of water

0.6420 ex 3909 50 90 30 Preparation containing by weight: 0 % — 31.12.2029 — 16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups, — 19 % or more but not more than 23 % of diethylene glycol butyl ether, and — 60 % or more but not more than 64 % of water

0.6424 ex 3909 50 90 40 Preparation containing by weight: 0 % — 31.12.2029 — 34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups, — 37 % or more but not more than 39 % of propylene glycol, and — 26 % or more but not more than 28 % of water

0.6921 ex 3910 00 00 15 Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), 0 % — 31.12.2026 trimethylsiloxy-terminated 184/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3260 ex 3910 00 00 20 Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl) 0 % — 31.12.2029 siloxane]

0.7057 ex 3910 00 00 25 Preparations containing by weight: 0 % — 31.12.2026 — 10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5), and — 10 % or more, α-Butyldimethylsilyl- ω -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy] propyl-terminated silicone polymer (CAS RN 146632-07-7)

0.7058 ex 3910 00 00 35 Preparations containing by weight: 0 % — 31.12.2026 — 30 % or more, α -Butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy) propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6) and — 10 % or more, N,N – Dimethylacrylamide (CAS RN 2680-03-7)

0.4049 ex 3910 00 00 40 Silicones of a kind used in the manufacture of long term surgical implants 0 % — 31.12.2026

0.7217 ex 3910 00 00 45 Dimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 mPa· 0 % — 31.12.2026 s (CAS RN 70131-67-8)

0.4300 ex 3910 00 00 50 Silicone based pressure sensitive adhesive in solvent containing copoly 0 % — 31.12.2027 (dimethylsiloxane/diphenylsiloxane) gum

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 185/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7218 ex 3910 00 00 55 Preparation containing by weight: 0 % — 31.12.2026 — 55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2), — 30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and — 1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)

0.5926 ex 3910 00 00 70 Passivating silicon coating in primary form, to protect edges and prevent short circuits in 0 % — 31.12.2029 semiconductor devices

0.8670 ex 3910 00 00 85 Two-component silicone, with a viscosity of the mixture of 3 000 cps or more, but not more 0 % — 31.12.2028 than 6 000 cps (according to standard GB/T 2794) for use as an electrical insulation material in solar panels junction box in the production of solar panels(1)

0.4413 ex 3911 10 00 81 Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by 0 % — 31.12.2029 weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by

weight aromatic alkenes yielding a hydrocarbon resin with: — an iodine value of more than 120 and — a Gardner Colour of more than 10 for the pure product or — a Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166) 186/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8220 *ex 3911 90 19 15 Polyetherimide of 0 % — 31.12.2026 — 5,5′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione) and 1,3-benzenediamine whether or not as a copolymer with 3-aminopropyl terminated dimethylsilicones (CAS RN 61128-46-9 or 99904-16-2), or — 5,5′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione) and 1,4-benzenediamine (CAS RN 61128-47-0), or — 4,4′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione), 5,5′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione), 4,5′-[(isopropylidene)bis(4,1-phenylene)dioxy]bis(1,3-isobenzofurandione), pyromellitic dianhydride, 1,2-benzenediamine, 1,3-benzenediamine and 1,4-benzenediamine with phthalic anhydride endcaps (CAS RN 96557-46-9)

0.8920 *ex 3911 90 19 25 Polyamideimide of 0 % — 31.12.2030 — 4-Chloroformylphthalic anhydride and 4,4′-methylenedianiline (CAS RN 35463-82-2), or — 4-Chloroformyphthalic anhydride, 4,4′-oxydianiline and 1,3-phenylenediamine (CAS RN 25928-85-2), containing by weight not more than 35 % of additives

0.4280 ex 3911 90 19 30 Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of 0 % — 31.12.2027 sodium hydroxide

0.5145 ex 3911 90 19 40 m-Xylene formaldehyde resin 0 % — 31.12.2026

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 187/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8450 ex 3911 90 19 80 Poly(oxy-1,4-phenylenesulfonyl-1,4-phenylene) (CAS RN 25608-63-3 and 0 % — 31.12.2027 CAS RN 25667-42-9) containing by weight not more than 20 % of additives

0.8218 ex 3911 90 99 23 Aqueous solution consisting of by weight 25 % or more, but not more than 40 % of a poly 0 % — 31.12.2026 (isobutylene-maleic anhydride) modified with: — N,N-dimethylpropane-1,3-diamine, — a copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups, — ethanol (CAS RN 497926-97-3)

0.3257 ex 3911 90 99 25 Copolymer of vinyltoluene and α-methylstyrene 0 % — 31.12.2029

0.5109 *ex 3911 90 99 35 Alternated copolymer of ethylene and maleic anhydride (EMA) 0 % — 31.12.2030

0.8009 *ex 3911 90 99 38 Mixture containing by weight: 0 % — 31.12.2030 — 90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and — 10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4)

0.3221 ex 3911 90 99 40 Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having 0 % — 31.12.2029 a calcium content of 9 % or more but not more than 16 % by weight 188/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3256 ex 3911 90 99 45 Copolymer of maleic acid and methyl vinyl ether 0 % — 31.12.2029

0.8010 *ex 3911 90 99 48 Mixture containing by weight: 0 % — 31.12.2030 — 90 % (± 1 %) of 1,4:5,8-dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and — 10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1)

0.3255 ex 3911 90 99 65 Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether 0 % — 31.12.2029

0.8918 *ex 3911 90 99 73 A mixture containing by weight: 0 % — 31.12.2030 — 89 % or more but not more than 91 % of 1,4:5,8-dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and — 9 % or more but not more than 11 % of polypropylene homopolymer (CAS RN 9003-07-0)

0.4091 ex 3911 90 99 86 Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9) 0 % — 31.12.2026

0.4912 ex 3912 11 00 30 Cellulose triacetate (CAS RN 9012-09-3) 0 % — 31.12.2026

0.4953 *ex 3912 11 00 40 Cellulose diacetate powder 0 % — 31.12.2030

0.3251 ex 3912 39 85 10 Ethylcellulose, not plasticized 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 189/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3253 ex 3912 39 85 20 Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium 0 % — 31.12.2029 dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose

0.3252 ex 3912 39 85 30 Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon 0 % — 31.12.2029 atoms

0.6718 *ex 3912 39 85 50 Polyquaternium 10 (CAS RN 68610-92-4) 0 % — 31.12.2030

0.4017 ex 3912 90 10 20 Hydroxypropyl methylcellulose phthalate 0 % — 31.12.2029

0.3749 ex 3913 90 00 85 Sterile sodium hyaluronate (CAS RN 9067-32-7) 0 % — 31.12.2029

0.3249 ex 3913 90 00 95 Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9) 0 % — 31.12.2029

0.8323 ex 3914 00 00 10 Aqueous suspension, containing by weight 0 % — 31.12.2027 — 20 % or more but not more than 30 % of beaded agarose, modified with nitrilotriacetic acid and loaded with divalent nickel ions (CAS RN 1615227-97-8), and — 20 % or more but not more than 30 % of ethanol (CAS RN 64-17-5)

0.5988 ex 3916 90 10 10 Rods with cellular structure, containing by weight: 0 % — 31.12.2029 — polyamide-6 or poly(epoxy anhydride) — 7 % or more but not more than 9 % of polytetrafluorethylene if present — 10 % or more but not more than 25 % of inorganic fillers 190/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8116 ex 3917 31 00 30 Tubings: 0 % — 31.12.2026 ex 3917 32 00 20 — with an outer diameter of 0,33 mm or more but not more than 3,3 mm, ex 3917 39 00 20 — with an inner diameter of 0,01 mm or more but not more than 2,1 mm, — suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa, — suitable for all solutions used in chromatography, — whether or not with fused silica, — whether or not covered with PEEK, for use in chromatographic system(1)

0.8268 ex 3917 32 00 30 Heat shrinkable tube: 0 % — 31.12.2029 — containing by weight 80 % or more polymer, — with an insulation resistance of 90 MΩ or more, — with a dielectric strength of 35 kV / mm or more, — with a wall thickness of 0,04 mm or more, but not more than 0,9 mm, — with a lay-flat width of 18 mm or more, but not more than 156 mm, for use in the manufacture of aluminium electrolytic capacitors(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 191/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8117 ex 3917 40 00 20 Plastic fittings (kit of nuts and ferrules or nuts) and connectors: 0 % — 31.12.2026 — threaded, — supported with or without a stainless steel ring, — suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

for tubings with: — outer diameter of 0,33 mm or more but not more than 3,3 mm, — suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, — suitable for all solutions used in chromatography, for use in the production of chromatographic systems(1)

0.4641 ex 3917 40 00 91 Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car 0 % — 31.12.2029 fuel hoses

0.2421 ex 3919 10 19 10 Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints 0 % — 31.12.2029 against counterfeiting, alteration or substitution of data or duplication, or an official mark for ex 3919 10 80 25 an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered ex 3919 90 80 31 on one side or on both sides with a release film 192/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4800 ex 3919 10 80 27 Polyester film: 0 % — 31.12.2027 ex 3919 90 80 20 — coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and — on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner

0.2910 ex 3919 10 80 35 Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on 0 % — 31.12.2029 one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film

0.4303 ex 3919 10 80 45 Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled 0 % — 31.12.2027 pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm ex 3919 90 80 45 or more but not more than 1,53 mm

0.3036 ex 3919 10 80 55 Acrylic foam tape: 0 % — 31.12.2027 ex 3919 90 80 53 — covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive, — covered on the other side with an acrylic pressure sensitive adhesive, — covered on one or both sides with a release sheet, — with a peel adhesion of more than 25 N/cm (at an angle of 90o as determined by the ASTM D 3330 method)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 193/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2416 ex 3919 10 80 57 Reflecting sheet: 0 % — 31.12.2029 ex 3919 90 80 30 — of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern ex 3920 61 00 30 — covered on one or both sides with one or more layers of plastic or metallisation, and — whether or not covered on one side with a self-adhesive layer and a release sheet

0.6886 *ex 3919 10 80 63 Reflecting film consisting of 0 % — 31.12.2030 — a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, — a layer of an acrylic resin having embedded glass beads, — a layer of an acrylic resin hardened by a melamine cross-linking agent, — a metal layer, — an acrylic adhesive, and — a release film 194/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4545 ex 3919 10 80 73 Self-adhesive reflecting sheet whether or not in segmented pieces, 0 % — 31.12.2029 ex 3919 90 80 50 — whether or not containing a watermark, — with or without an application tape coated on one side with an adhesive;

the reflective sheet consists of: — a layer of acrylic or vinyl polymer, — a layer of poly(methyl methacrylate) or polycarbonate containing microprisms, — a layer of metallisation, — an adhesive layer, and — a release sheet — whether or not containing an additional layer of polyester

0.5166 ex 3919 10 80 75 Self-adhesive reflecting film, consisting of several layers including: 0 % — 31.12.2026 ex 3919 90 80 80 — a copolymer of acrylic resin, — polyurethane, — a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, — glass microspheres, and — an adhesive layer, with a release liner on one or both sides

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 195/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8667 ex 3919 10 80 78 Polytetrafluoroethylene film, 0 % — 31.12.2028 ex 3919 90 80 48 — with a thickness of 50 μm or more, — with a width of 6,30 mm or more but not more than 740 mm, — an elongation at break of not more than 200 %, and — coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 μm

0.3243 ex 3919 90 80 23 Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of 0 % — 31.12.2029 terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner

0.4760 ex 3919 90 80 24 Reflecting laminated sheet: 0 % — 31.12.2029 — consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, — covered on both sides with one or more layers of plastic material and — covered on one side with an adhesive layer and a release sheet

0.4415 ex 3919 90 80 33 Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one 0 % — 31.12.2029 side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1 245 mm but not more than 1 255 mm 196/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4445 ex 3919 90 80 49 Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one 0 % — 31.12.2029 side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet

0.5507 ex 3919 90 80 51 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not 0 % — 31.12.2029 exceeding 90 μm, covered on one side with an adhesive layer and a release sheet

0.4532 ex 3919 90 80 54 Poly(vinyl chloride) film, on one side covered with 0 % — 31.12.2029 — a polymer layer — an adhesive layer — a release liner, on one side embossed, containing oblate spheres; whether or not on the other side covered with an adhesive layer and a metallised polymer layer

0.8629 ex 3919 90 80 55 Black polyvinyl chloride film: 0 % — 31.12.2028 — with a gloss of more than 25 degrees according to ASTM D 2457, — whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release liner for use in the manufacture of die-cut films for interior and exterior surfaces of cars(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 197/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4314 ex 3919 90 80 56 Transparent polyethylene film coated on one side with an aqueous acrylic adhesive, of 0 % — 31.12.2029 a thickness of 30 μm to 50 μm, put up in rolls of a width of 52 cm or more but not more than 154 cm

0.4947 *ex 3919 90 80 65 Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting 0 % — 31.12.2030 of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner

0.4925 *ex 3919 90 80 70 Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad 0 % — 31.12.2030

0.4964 *ex 3919 90 80 82 Reflecting film consisting of: 0 % — 31.12.2030 — a polyurethane layer, — a glass microspheres layer, — a metallised aluminium layer, and — an adhesive, covered on one or both sides with a release liner, — whether or not a poly(vinyl chloride) layer, — a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use 198/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4459 ex 3919 90 80 83 Reflector or diffuser sheets, in rolls, 0 % — 31.12.2027 — for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or — for equal transmission and distribution of light, intended for LCD modules

0.3754 ex 3920 10 89 40 Composite sheet containing an acrylic coating and laminated to a high-density polyethylene 0 % — 31.12.2027 layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm

0.8205 ex 3920 20 21 50 Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more 0 % — 31.12.2026 than 14 micron

0.3028 ex 3920 20 29 70 Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of 0 % — 31.12.2029 polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having:

— a thickness of 55 μm or more but not more than 97 μm, — a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, and — a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 199/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5167 ex 3920 20 29 94 Mono-axial oriented, co-extruded film: 0 % — 31.12.2027 — consisting of 3 to 5 layers, — each layer mainly consisting of polypropylene and/or polyethylene, — each layer containing not more than 10 % by weight of other polymers, — whether or not containing titanium dioxide in the core layer, — of an overall thickness of not more than 75 μm

0.8848 ex 3920 30 00 30 Opaque layer, whether or not printed, biaxially oriented, high impact polystyrene foil in rolls 0 % — 31.12.2029

with: — a thickness of 0,229 mm or more but not more than 0,279 mm, — an titanium dioxide content by weight of 3 % or more but not more than 3,5 %, — on one side a highly hydrophobic, chemically neutral and non-reactive coating

0.3024 ex 3920 43 10 92 Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even 0 % — 31.12.2029 microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticiser to 100 parts of poly(vinyl chloride)

0.3026 ex 3920 43 10 95 Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other 0 % — 31.12.2029 plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet 200/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5930 ex 3920 49 10 30 Film of a (polyvinyl)chloride-copolymer 0 % — 31.12.2027 — containing by weight 45 % or more of fillers — on a support

0.3021 ex 3920 51 00 20 Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 0 % — 31.12.2029 3,5 mm or more but not more than 19 mm

0.5506 ex 3920 51 00 30 Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not 0 % — 31.12.2029 exceeding 125 μm

0.5753 ex 3920 51 00 40 Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690) 0 % — 31.12.2029

0.7949 *ex 3920 61 00 40 Extruded thermoplastic foils or films of polycarbonate with: 0 % — 31.12.2030 — matt surface texture on both sides — a thickness of more than 50 μm but not more than 200 μm, — a width of 800 mm or more, but not more than 1 500 mm, and — a length of 300 m or more, but not more 2 500 m

0.8274 ex 3920 61 00 50 Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a: 0 % — 31.12.2026 — total thickness of more than 230 μm but not more than 270 μm, — top layer thickness of more than 40 μm but not more than 55 μm, — defined surface roughness of the top layer of 0,5 μm or less (according to ISO 4287), — UV-stabilized top layer

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 201/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7418 ex 3920 62 19 05 Poly(ethylene terephthalate) film in rolls: 0 % — 31.12.2027 ex 3920 62 90 10 — with a thickness of 0,335 mm or more but not more than 0,365 mm, and — coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm

0.3234 ex 3920 62 19 08 Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 0 % — 31.12.2029 25 μm, either: — only dyed in the mass, or — dyed in the mass and metallised on one side

0.8438 ex 3920 62 19 28 Non-transparent film of poly(ethylene terephthalate) or poly(vinyl difluoride): 0 % — 31.12.2027 — each outer layer with a thickness of 7 μm or more but not more than 80 μm, — with a tensile strength of 300 N/cm2 or more (ASTM D-882), — with a total thickness of 200 μm or more but not more than 350 μm, and — with a width of 600 mm or more but not more than 1 600 mm, — covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites 202/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4520 ex 3920 62 19 32 Transparent poly(ethylene terephthalate) film: 0 % — 31.12.2028 — having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 μm or more but not more than 80 μm, whether coated with an acrylic-based organic material or not, — with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, — with a light transmittance of more than 70 %, — with a haze value of not more than 1,3 %, — with a total thickness of 10 μm or more but not more than 350 μm, — with a width of 800 mm or more but not more than 1 600 mm

0.3356 ex 3920 62 19 38 Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side 0 % — 31.12.2029 with a layer of aluminium oxide of a thickness of not more than 35 nm

0.3357 *ex 3920 62 19 48 Sheets or rolls of poly(ethylene terephthalate): 0 % — 31.12.2030 — coated on both sides with a layer of epoxy acrylic resin, — of a total thickness of 37 μm (± 3 μm)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 203/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2589 ex 3920 62 19 52 Film of polyethylene terephthalate, polyethylene naphthalate or similar polyester, coated on 0 % — 31.12.2029 one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D257 method)

0.4344 ex 3920 62 19 60 Poly(ethylene terephthalate) film: 0 % — 31.12.2027 — of a thickness of not more than 20 μm, — coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2 μm

0.8927 *ex 3920 62 19 79 Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with 0 % m2 31.12.2030 — a thickness of 0,07 mm or more but not more than 0,15 mm — a width of 762 mm or more but not more than 1 350 mm

0.8839 ex 3920 62 19 85 Three-layer transparent plastic film consisting of a 15 μm fluorinated polymer (FCC) (EVA) 0 % — 31.12.2029 layer, a 275 μm polyethylene terephthalate (PET) layer and a 25 μm fluorinated polymer (FCC)

layer with: — a total thickness of 300 μm or more, but not more than 330 μm, — a tensile strength of 375 N/cm or more in both the longitudinal and transverse directions (ASTM D-882), — a low thermal shrinkage of 1 % or less at 150 °C for 30 minutes, — a low water vapor permeability of 2,5 g/m2•d or less, and — a high breakdown voltage of 18 kV or more and — a partial discharge voltage of 1 500 VDC or more (BG/T 123542.2-2009) to be used as a protective layer on the back of photovoltaic modules 204/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3328 ex 3920 69 00 20 Film of poly(ethylene naphthalene-2,6-dicarboxylate) 0 % — 31.12.2029

0.7882 ex 3920 69 00 30 Mono- or multilayer, transverse oriented, shrink film: 0 % — 31.12.2029 — composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters, — with a thickness of 20 μm or more but not more than 100 μm, — with a length of 2 385 m or more but not more than 9 075 m, — biodegradable and compostable (as determined by the method EN 13432)

0.7883 ex 3920 69 00 70 Mono- or multilayer, biaxially oriented film: 0 % — 31.12.2029 — composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters, — with a thickness of 9 μm or more but not more than 120 μm, — with a length of 1 395 m or more but not more than 21 560 m, — biodegradable and compostable (as determined by the method EN 13432)

0.4766 ex 3920 91 00 52 Poly(vinyl butyral) film: 0 % — 31.12.2029 — containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis (2-ethyl hexanoate) as a plasticiser, — with a thickness of 0,73 mm or more but not more than 1,50 mm

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 205/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3329 ex 3920 91 00 91 Poly(vinyl butyral) film having a graduated coloured band 3 % — 31.12.2029

0.3136 ex 3920 91 00 93 Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or 0 % — 31.12.2029 laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and

having the following characteristics: — a visible light transmission of 50 % or more, — coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral), — a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm

0.4508 ex 3920 91 00 95 Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by 0 % — 31.12.2029 weight 29 % or more but not more than 31 % of 2,2’-ethylenedioxydiethyl bis (2-ethylhexanoate) as a plasticiser

0.3917 ex 3920 99 28 40 Polymer film containing the following monomers: 0 % — 31.12.2029 — poly (tetramethylene ether glycol), — bis (4-isocyanotocyclohexyl) methane, — 1,4-butanediol or 1,3-butanediol, — with a thickness of 0,25 mm or more but not more than 5,0 mm, — embossed with a regular pattern on one surface, — and covered with a release sheet 206/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4192 *ex 3920 99 28 50 Thermoplastic polyurethane film (TPU) based on an aliphatic polycaprolactone (PCL), 0 % m2 31.12.2026 transparently backed on one side with a removable protective film (PET film), with a light transmission of more than 93 % (according to DIN EN ISO 13468-1), with a thickness of 25 μm or more but not more than 500 μm

0.6579 ex 3920 99 28 65 Matt, thermoplastic polyurethane foil in rolls with: 0 % m2 31.12.2029 — a width of 1 640 mm (± 10 mm), — a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457), — a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287), — a thickness of more than 365 μm but not more than 760 μm, — a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)), — an elongation to break of 470 % (as determined by the method: EN ISO 527)

0.5315 ex 3920 99 28 70 Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: 0 % — 31.12.2026 — microspheres with a coating of metal, whether or not alloyed with gold, — an adhesive layer, — with a protective layer of silicone or poly(ethylene terephthalate) on one side, — with a protective layer of poly(ethylene terephthalate) on the other side, and — with a width of 5 cm or more but not more than 100 cm — with a length of not more than 2 000 m

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 207/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3326 ex 3920 99 59 25 Poly(1-chlorotrifluoroethylene) film 0 % — 31.12.2029

0.3135 ex 3920 99 59 65 Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but 0 % — 31.12.2029 not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %

0.6066 ex 3921 19 00 30 Blocks with cellular structure, containing by weight: 0 % — 31.12.2029 — polyamide-6 or poly(epoxy anhydride) — 7 % or more but not more than 9 % of polytetrafluorethylene if present — 10 % or more but not more than 25 % of inorganic fillers

0.7132 ex 3921 19 00 50 Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded 0 % — 31.12.2026 non-woven cloth with — a total thickness of more than 0,05 mm but not more than 0,20 mm, — a water entry pressure between 5 and 200 kPa according to ISO 811, and — an air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5

0.8913 *ex 3921 19 00 55 Strip of microporous polytetrafluoroethylene on a support of a non-woven 0 % m2 31.12.2030 — wound on a roll on a core of 3 inches, — with a width of 69,5 mm, 40,8 mm, 36,5 mm, 20 mm, 13,5 mm or 10 mm for use in the manufacture of filters for kidney dialysis equipment and intravenous application(1) 208/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6911 *ex 3921 19 00 65 Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, for the 3,2 % — 31.12.2026

manufacture of alkaline battery separators with: — a width of 98 mm or more but not more than 170 mm, — a thickness of 15 μm or more but not more than 36 μm,

0.7263 *ex 3921 19 00 75 Microporous monolayer film of polypropylene or a microporous trilayer film of 3,2 % — 31.12.2026 polypropylene, polyethylene and polypropylene, each film with: — zero transversal production direction (TD) shrinkage, — a total thickness of 8 μm or more, but not more than 40 μm, — a width of 15 mm or more, but not more than 900 mm, — a length of more than 200 m, but not more than 8 000 m, — an average pore size between 0,02 μm and 0,1 μm, — whether or not laminated with a Polypropylene non-woven mat of 50 to 200 μm thickness, — whether or not coated with surfactant, — whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm, — whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm

0.3002 ex 3921 19 00 95 Film of polyethersulfone, of a thickness of not more than 200 μm 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 209/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3003 ex 3921 90 10 10 Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced 0 % — 31.12.2029 with glass fibres

0.6156 ex 3921 90 10 30 Multilayer film consisting of: 0 % m2 31.12.2029 — a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm, — a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm, — an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm, — and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm

0.4844 ex 3921 90 55 25 Prepreg sheets or rolls containing polyimide resin 0 % — 31.12.2029

0.7510 ex 3921 90 55 35 Glass fiber impregnated with epoxy resin for use in the manufacture of smart cards(1) 0 % m2 31.12.2029

0.6742 *ex 3921 90 55 40 Three layered fabric sheet, in rolls, 0 % m2 31.12.2030 — comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta, — coated on both sides with polyamide, — of a total thickness not more than 135 μm, — of a total weight not more than 80 g/m2 210/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8291 ex 3921 90 55 70 Membrane composed of a polyamide layer and a polysulfone layer on a polyethylene 0 % m2 31.12.2026

terephthalate support layer with: — a total thickness of 0,25 mm or more but not more than 0,40 mm, — a total weight of 109 g/m2 or more but not more than 114 g/m2

0.5396 ex 3923 10 90 10 Photomask or wafer compacts: 0 % — 31.12.2026 — consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties, — having non porous, abrasion resistant or impact resistant surface properties, — fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and — with or without a gasket seal, of a kind used in the photolithography or other semiconductor production to house photomasks or wafers

0.7630 ex 3926 30 00 40 Plastic internal door handle used in the manufacture of motor vehicles(1) 0 % — 31.12.2029

0.7335 ex 3926 30 00 50 Coated interior or exterior decorative parts consisting of: 0 % p/st 31.12.2027 ex 3926 90 97 48 — a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and — a PVC foil, — not containing layers of copper, nickel or chromium, for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 211/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2764 ex 3926 90 97 10 Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more 0 % — 31.12.2029 than 80 μm

0.8664 ex 3926 90 97 22 Gaskets for road vehicles mirrors and their components, made of polyethylene foam, 0 % — 31.12.2028

produced by a thermoforming process and with: — a density of 20 kg/m3 or more, but not more than 40 kg/m3, — a tensile strength of not less than 170 kPa, — water absorption coefficient of not greater than 1 %, — a length of 5 mm or more but not more than 300 mm, — a height of 10 mm or more but not more than 400 mm, — a depth of 5 mm or more but not more than 250 mm

0.6717 *ex 3926 90 97 23 Plastic cover with clips for the exterior rear-view mirror of motor vehicles 0 % p/st 31.12.2030

0.7445 ex 3926 90 97 27 Gasket of polyethylene foam, intended to fill-up the space between the body of a motor 0 % — 31.12.2029 vehicle and the base of a rear-view mirror

0.5474 ex 3926 90 97 30 Parts of car radio and car air-conditioner front panels 0 % — 31.12.2026 — of acrylonitrile-butadiene-styrene with or without polycarbonate, — coated with a copper, a nickel and a chrome layers, — with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm 212/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6301 ex 3926 90 97 33 Housings, housing parts, drums, setting wheels, frames, covers, upper part, design plate and 0 % p/st 31.12.2029 other parts of acrylonitrile-butadiene-styrene, polycarbonate, polymethylmethacrylate or thermoplastic polyurethane, of a kind used for the manufacture of remote controls

0.7061 ex 3926 90 97 40 Silicone shell for breast implant 0 % — 31.12.2026

0.3850 ex 3926 90 97 43 Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow 0 % — 31.12.2029 microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 μm or more but not more than 4,95 μm

0.8118 ex 3926 90 97 58 Plastic ferrules and/or plugs: 0 % — 31.12.2026 — supported with or without a stainless steel ring, — suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

for tubings with: — outer diameter of 0,33 mm or more but not more than 3,3 mm, — suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa, — suitable for all solutions used in chromatography, for use in the production of chromatographic systems(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 213/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7196 ex 3926 90 97 77 Silicone decoupling ring with an inner diameter of 14,7 mm or more but not more than 0 % p/st 31.12.2026 16,0 mm, in immediate packings of 2 500 pieces or more, of a kind used in car parking aid sensor systems

0.8504 ex 4009 31 00 10 Multilayered rubber pipe, reinforced with aramide fabric, whether or not having polyamide 0 % — 31.12.2027 connection elements and steel clamps, for use in the manufacture of automotive heat ex 4009 32 00 20 exchangers and/or condenser in automotive air conditioning systems(1)

0.6708 *ex 4009 42 00 20 Rubber brake hose with: 0 % — 31.12.2026 — textile strings, — a wall thickness of 3,2 mm, — a metal hollow terminal pressed on both ends, and — one or more mounting brackets, for use in the manufacture of goods of Chapter 87(1)

0.7042 ex 4010 31 00 10 Vulcanized rubber endless transmission belt of trapezoidal cross-section (V-belts) with 0 % — 31.12.2029 longitudinal V-ribbed pattern on the inner side for use in the manufacture of goods of ex 4010 33 00 10

Chapter 87(1) ex 4010 39 00 10 214/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6844 *ex 4016 93 00 30 Rectangular ethylene-propylene-diene rubber gasket, with: 0 % — 31.12.2030 — a length of 72 mm or more but not more than 825 mm, — a width of 18 mm or more but not more than 155 mm, — a peak temperature of 150 °C or more but not more than 240 °C, — a permissible material outflow at the place of the mold split of not more than 0,3 mm

0.8646 ex 4016 99 52 10 Hanger of the exhaust muffler consisting of: 0 % — 31.12.2028 — a steel bracket with at least one mounting hole and — silent block, for use in the manufacture of goods of Chapter 87(1)

0.7170 ex 4016 99 57 10 Air intake hose for air supply to the combustion part of the engine comprising at least: 0 % p/st 31.12.2026 — one flexible rubber hose, — one plastic hose, and — metal clips, — whether or not a resonator for use in the manufacture of goods of Chapter 87(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 215/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8925 *ex 4016 99 57 40 Wiper rubber used in the manufacture of windshield wipers, 0 % — 31.12.2030 — made of a mixture of natural rubber and chloroprene rubber — with a Shore hardness of 60A(1)

0.5148 ex 4016 99 97 30 Tyre moulding bladder 0 % — 31.12.2030

0.5842 ex 4104 41 19 10 Buffalo leather, split, chrome tanned synthetic retanned (“crust”), dry 0 % — 31.12.2029

0.2555 4105 10 00 Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, 0 % — 31.12.2029 whether or not split, other than leather of heading 4114 4105 30 90

0.2553 4106 21 00 Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, 0 % — 31.12.2029 whether or not split, other than leather of heading 4114 4106 22 90

0.2554 4106 31 00 Leather of other animals, without hair on, not further prepared than tanned, other than 0 % — 31.12.2029 leather of heading 4114 4106 32 00 4106 40 90 4106 92 00 216/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6223 ex 4408 39 30 10 Okoumé sheets for veneering for plywood panels 0 % — 31.12.2029 — with a largest dimension of 900 mm or more, but not more than 3 250 mm, — with a smallest dimension of 95 mm or more but not more than 2 000 mm, — with a thickness of 0,5 mm or more, but not more than 4 mm, — unsanded, — not planed, and — sawn, sliced or peeled lengthwise

0.8737 ex 4408 39 95 10 Iroko sheets for veneering for plywood panels: 0 % — 31.12.2029 — with a largest dimension of 900 mm or more, but not more than 3 250 mm, — with a smallest dimension of 95 mm or more but not more than 2 000 mm, — with a thickness of more than 1 mm, but not more than 4 mm, — unsanded, — not planed, and — sawn, sliced or peeled lengthwise

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 217/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8733 ex 4408 39 95 20 Igaganga sheets for veneering for plywood panels: 0 % — 31.12.2029 — with a largest dimension of 900 mm or more, but not more than 3 250 mm, — with a smallest dimension of 95 mm or more but not more than 2 000 mm, — with a thickness of more than 1 mm, but not more than 4 mm, — unsanded, — not planed, and — sawn, sliced or peeled lengthwise

0.8738 ex 4408 39 95 30 Ozigo sheets for veneering for plywood panels: 0 % — 31.12.2029 — with a largest dimension of 900 mm or more, but not more than 3 250 mm, — with a smallest dimension of 95 mm or more but not more than 2 000 mm, — with a thickness of more than 1 mm, but not more than 4 mm, — unsanded, — not planed, and — sawn, sliced or peeled lengthwise 218/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8372 ex 4411 12 92 10 Fibreboard: 0 % — 31.12.2027 — with a thickness of 2,20 mm or more but not more than 2,80 mm, — with a density of 0,95 g/cm3 or more, — lacquered or coated with melamine foil on both sides, and — with dimensions of 1 300 mm x 1 100 mm or less

0.4217 ex 5004 00 10 10 Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured 0 % — 31.12.2026 or bleached, entirely of silk

0.2551 ex 5005 00 10 10 Yarn spun entirely from silk waste (noil), not put up for retail sale 0 % — 31.12.2029 ex 5005 00 90 10

0.2544 5208 11 10 Fabrics for the manufacture of bandages, dressings and medical gauzes 5,2 % — 31.12.2029

0.7372 ex 5311 00 90 10 Plain-woven fabric of paper yarns glued on a tissue paper layer: 0 % — 31.12.2027 — with a weight of 190 g/m2 or more but not more than 280 g/m2, and — cut into rectangles with a side length of 40 cm or more but not more than 140 cm

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 219/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8916 *ex 5402 33 00 10 Textured polyester yarn: 0 % — 31.12.2030 — textured using single heater and double heater methods in accordance with DIN 53840-T1 standard, — with a linear density of 83 dtex or more, but not more than 666 dtex, — with an average minimum tenacity of 32 cN/tex, — with a filament count of 36 or more, but not more than 192, — with an elongation at break of 16 % or more, but not more than 33 %, — with a boiling water shrinkage of 3 % or more, but not more than 8 %, — containing by weight 1 % or more but not more than 3 % of mineral oil, synthetic oil or mixed oils

0.2975 ex 5402 49 00 30 Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical 0 % — 31.12.2029 sutures(1)

0.3098 ex 5402 49 00 50 Non-textured filament yarn of poly(vinyl alcohol) 0 % — 31.12.2029

0.8108 *ex 5403 31 00 10 Continuous viscose rayon filament yarn of 105 dtex or more but not more than 117 dtex, and 0 % — 31.12.2026 consisting of 36 monofilaments or more but not more than 40 monofilaments

0.8910 *ex 5403 31 00 20 Centrifugal viscose rayon filament yarn, with: 0 % — 31.12.2030 — a linear density of 80 decitex or more, but not more than 88 decitex, and — a filament count of 24 or more, but not more than 36 monofilaments 220/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8225 ex 5404 19 00 60 Chemically tapered synthetic filaments of polyester with: 0 % — 31.12.2026 — a diameter of 0,1 mm or more but not more than 0,6 mm, — a length of 30 mm or more but not more than 120 mm, for use in the manufacture of paintbrushes(1)

0.3311 ex 5404 90 90 20 Strip of polyimide 0 % — 31.12.2029

0.8382 ex 5407 30 00 10 Open mesh fabric made of thermally cross-bonded filaments of a polyolefin, with a density of 0 % — 31.12.2027 0,94 g/cm3 or more, with: — a weight of 21 g/m2 or more but not more than 24 g/m2, — a width of 560 mm or more but not more than 1 200 mm, — a thickness of 100 μm or more but not more than 120 μm, — an elongation at break of not more than 20 % (ASTM D5034, machine direction), — an elongation at break of not more than 22 % (ASTM D5034, cross direction), — with a stretch of not more than 100 N/5 cm (ASTM D882, machine direction), and — with a stretch of not more than 130 N /5 cm (ASTM D882, cross direction)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 221/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3214 ex 5503 90 00 20 Poly(vinyl alcohol) fibres, whether or not acetalized 0 % — 31.12.2029 ex 5506 90 00 10 ex 5601 30 00 10

0.3212 ex 5603 11 10 10 Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: 0 % m2 31.12.2029 ex 5603 11 90 10 — of a thickness of 200 μm or more but not more than 280 μm and ex 5603 12 10 10 — of a weight of 20 g/m2 or more but not more than 50 g/m2 ex 5603 12 90 10 ex 5603 91 10 10 ex 5603 91 90 10 ex 5603 92 10 10 ex 5603 92 90 10

0.2552 ex 5603 12 90 30 Non-wovens of aromatic polyamide fibres obtained by polycondensation of 0 % m2 31.12.2028 m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles ex 5603 13 90 30 ex 5603 14 80 10 ex 5603 92 90 60 ex 5603 93 90 40 ex 5603 94 80 30 222/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2548 ex 5603 12 90 60 Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more 0 % m2 31.12.2029 than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 ex 5603 13 90 60 seconds (as determined by the ISO 5636/5 method)

0.5059 *ex 5603 13 10 20 Non-woven of spunbonded polyethylene, with a coating, 0 % m2 31.12.2030 — of a weight of more than 80 g/m2 but not more than 105 g/m2 and — an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)

0.8024 ex 5603 14 10 30 Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media: 0 % m2 31.12.2029 — of weight of 160 g/m2 or more but not more than 300 g/m2, — with a filtration efficiency of class M or better (according to DIN 60335-2-69), — pleatable,

with at least one of following treatments: — a coating or covering with polytetrafluoroethylene (PTFE), — a coating with aluminium particles, — a coating of phosphorous based flame retardants, — a nano fiber coating of a polyamide, a polyurethane or a fluorine-containing polymer

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 223/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5987 ex 5603 14 80 60 Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media: 0 % m2 31.12.2028 — of weight of 160 g/m2 or more but not more than 300 g/m2, — with a filtration efficiency of class M or better (according to DIN 60335-2-69), — pleatable, — with or without an expanded polytetrafluoroethylene (ePTFE) membrane

0.3042 ex 5603 92 90 70 Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of 0 % m2 31.12.2028 polypropylene and polyester, whether or not laminated on one side or on both sides with ex 5603 94 80 40 spunbonded filaments of polypropylene

0.5197 ex 5603 92 90 80 Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with 0 % m2 31.12.2026

polyolefin filaments: ex 5603 93 90 50 — a weight of 25 g/m2 or more but not more than 150 g/m2, — in the piece or simply cut into squares or rectangles, — not impregnated, — with cross-directional or machine-directional stretch properties for use in the manufacture of infant/child care products(1)

0.3210 ex 5603 94 80 20 Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips(1) 0 % m2 31.12.2028 224/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2415 ex 5803 00 10 91 Gauze of cotton, of a width of less than 1 500 mm 0 % — 31.12.2029

0.7081 ex 5903 20 90 20 Two layers' plastic-laminated textile fabric with: 0 % — 31.12.2026 — one layer consisting of knitted or crocheted polyester textile fabric, — other layer consisting of polyurethane foam, — a weight of 150 g/m2 or more, but not more than 500 g/m2, — a thickness of 1 mm or more, but not more than 5 mm for use in the manufacture of the retractable roof of motor vehicles(1)

0.8213 ex 5906 99 90 30 Woven and coated rubberised textile fabric with the following characteristics: 0 % — 31.12.2026 — with three layers, — the outer layers consist of a natural rubber, EPDM and chloropen rubber compound, — the middle layer consists of polyester fabric, for use in the manufacture of life rafts(1)

0.2453 ex 5907 00 00 10 Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more 0 % — 31.12.2026 than 150 μm

0.3207 ex 5911 90 99 30 Parts of equipment for the purification of water by reverse osmosis, consisting essentially of 0 % — 31.12.2029 plastic-based membranes, supported internally by woven or non-woven textile materials ex 8421 99 90 92 which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 225/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4638 ex 5911 90 99 40 Multi-layered non-woven polyester polishing pads, impregnated with polyurethane 0 % — 31.12.2029

0.7340 ex 5911 90 99 50 Loudspeaker vibration damper, made from round, corrugated, flexible and cut-to-size tissue of 0 % — 31.12.2027 textile fibres of polyester, cotton or aramid or a combination hereof, of a kind used in car loudspeakers

0.6469 ex 6804 21 00 20 Discs 0 % p/st 31.12.2029 — of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy, — having a self-sharpening effect by constant release of the diamonds, — suitable for abrasive cutting of wafers, — whether or not containing a hole in the centre, — whether or not on a support — with a weight of not more than 377 g per piece and — with an external diameter of not more than 206 mm

0.8666 ex 6804 21 00 40 Steel wire used for cropping and squaring semiconductors: 0 % — 31.12.2028 — coated with diamond grains of 5μm or more, but not more than 55μm — wire diameter 23 μm or more but not more than 350 μm, — having a breaking strength of 11 N or more, but not more than 170 N

0.2755 ex 6813 89 00 20 Friction material, of a thickness of less than 20 mm, not mounted, for use in the manufacture 0 % — 31.12.2029 of friction components(1) 226/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5931 ex 6814 10 00 10 Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not 0 % — 31.12.2029 calcined, whether or not reinforced with aramid fibres

0.2546 ex 6903 90 90 40 Silicon carbide reactor tubes and holders having a maximum service temperature of 1 370 °C 0 % — 31.12.2029 or more

0.4978 *ex 6909 19 00 20 Silicon nitride (SiN) rollers or balls 0 % — 31.12.2030 3 4

0.6071 ex 6909 19 00 25 Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide 0 % — 31.12.2029

0.3403 ex 6909 19 00 30 Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall 0 % — 31.12.2029 volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end

0.8028 *ex 6909 19 00 40 Ceramic-carbon absorption or adsorption cartridges of fuel motor vehicle systems, with the 0 % p/st 31.12.2030

following characteristics: — extruded fired ceramic bound multicellular cylindrical structure, — 5 % or more by weight but not more than 70 % by weight of activated carbon, — 30 % or more by weight but no more than 90 % by weight of ceramic binder, — with a diameter of 29 mm or more but no more than 41 mm, — a length of not more than 150 mm, — fired at temperature of 800 °C or more

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 227/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2538 ex 6909 19 00 50 Ceramic articles made of continuous filaments of ceramic oxides, containing by weight: 0 % — 31.12.2029 ex 6914 90 00 20 — 2 % or more of diboron trioxide, — 28 % or less of silicon dioxide and — 60 % or more of dialuminium trioxide

0.3766 ex 6909 19 00 60 Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and 0 % — 31.12.2029 silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end

0.4582 ex 6909 19 00 70 Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of 0 % — 31.12.2029 aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section

0.3404 ex 6914 90 00 30 Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of 0 % — 31.12.2029 a diameter of more than 125 μm

0.8265 ex 7007 11 10 10 Specifically shaped and toughened safety glass: 0 % — 31.12.2026 — with a width of 200 mm or more but not more than 600 mm, — with a height of 150 mm or more but not more than 500 mm, for use in the manufacture of motor vehicle window assemblies(1) 228/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8860 ex 7007 19 80 86 A ready-to-install, circular graded tempered glass of the cover of door assembly in washing 0 % — 31.12.2029

machines with: — a light transmittance of 34,2 % or more but not more than 37,8 %, — a diameter of 477,2 mm or more but not more than 477,8 mm, — a thickness of 2,9 mm or more but not more than 3,5 mm, — a weight of 1 345 g or more but not more than 1 445 g, — 3-zone structure including Euro Deep Gray colour printed zone(1)

0.6380 ex 7009 10 00 30 Layered glass with mechanical dimming ability by different angles of incident light 0 % p/st 31.12.2029

comprising: — whether or not a layer of chrome, — a break-resistance adhesive tape or hot-melt adhesive, and — a release film on the front side and protective paper at the back side, of a kind used for interior rear-view mirrors of vehicles

0.5789 ex 7009 10 00 50 Unfinished electro-chromic auto-dimming mirror for motor vehicle rear-view mirrors: 0 % — 31.12.2027 — whether or not equipped with plastic backing plate, — whether or not equipped with a heating element, — whether or not equipped with Blind Spot Module (BSM) display

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 229/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6870 *ex 7009 10 00 60 Electrochromic self-dimming inside rear-view mirror: 0 % — 31.12.2030 — with a mirror support — in a plastic casing and — with an integrated circuit, — whether or not with a high beam assistant, — whether or not with a digital compass, — whether or not with a garage door opener, — whether or not with an integrated toll module, — whether or not with a camera for driver and/or cabin monitoring, — whether or not with an infrared filter, for use in the manufacture of motor vehicles of Chapter 87(1)

0.8663 ex 7009 91 00 10 Chrome-plated glass mirror with: 0 % — 31.12.2028 — a length of 155 mm or more, but not more than 158 mm, — a height of 115 mm or more, but not more than 120 mm, — a blind spot sensor with a blind spot motion detection light module, with an edge luminescence greater than or equal to 5 000 cd/m2 and a central luminescence greater than or equal to 7 000 cd/m2, — a heater foil, with a resistance of 1,1 kΩ or more, but not more than 1,35 kΩ, designed to be mounted in a housing as an exterior vehicle mirror, for use in the manufacture of car mirrors(1) 230/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8682 ex 7009 91 00 20 Aspherical, convex or flat chrome-plated glass, ready for framing: 0 % — 31.12.2028 — with a length of 140 mm or more but not more than 215 mm, — with a height of 104 mm or more but not more than 138 mm, — with curvature radius of 0 mm or more but not more than 1 330 mm, — with a reflectance of more than 40 %, for the manufacture of automotive mirrors(1)

0.3400 ex 7014 00 00 10 Optical elements of glass (other than those of heading 7015), not optically worked, other than 0 % — 31.12.2029 signalling glassware

0.7056 ex 7019 61 00 70 E-fibre glass fabrics: 0 % m2 31.12.2026 ex 7019 63 00 30 — having a weight of 20 g/m2 or more, but not more than 214 g/m2, — surface treated with an organosilane coupling agent, — in rolls, — having a humidity content by weight of 0,13 % or less, and — having not more than 3 hollow fibres out of 100 000 fibres, for the exclusive use in the manufacture of prepregs and copper clad laminates(1)

0.7647 ex 7019 64 00 40 Epoxy resin coated glass woven fabric containing by weight: 0 % — 31.12.2029 — 91 % or more but not more than 93 % of glass fibres, — 7 % or more but not more than 9 % of epoxy resin

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 231/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4059 ex 7019 71 00 50 Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts(1) 0 % — 31.12.2026 ex 7019 72 00 50

0.8915 *ex 7019 80 10 40 Vacuum insulated panel consisting of hermetic aluminium foil and stiff core, without air 0 % p/st 31.12.2030 inside, used for thermal reinforcement of fridges and freezers and combination of them, with:

— a glass wool filling, — a thickness of 5,6 mm or more but not more than 35 mm, — a length of 195 mm or more but not more than 1 875 mm, — a width of 155 mm or more but not more than 545 mm, — a thermal conductivity lower than or equal to 2,5 mW/mK, — an internal pressure below 1,0 Pa, — an ambient operating temperature of – 50 °C or more but not more than 80 °C

0.3940 ex 7019 80 90 10 Glass wool in which fibres of a diameter of less than 4,6 μm predominate 0 % — 31.12.2028

0.4024 ex 7019 90 00 30 High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus 0 % — 31.12.2029 glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)

0.8616 ex 7019 90 00 50 Insulating rigid panels made by vacuum compression of glass fibres wrapped in protective 0 % — 31.12.2028 gas-tight film, for use in the manufacture of refrigerators and freezers and their combinations(1) 232/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8903 *ex 7019 90 00 60 Vacuum insulation panel, consisting of a gas-tight aluminium foil housing surrounding a rigid, 0 % p/st 31.12.2029 air-free core with: — a glass fiber filling, — a thickness of 5,6 mm or more but not more than 32,4 mm, — a length of 195 mm or more but not more than 1 835 mm, — a width of 155 mm or more but not more than 545 mm, — a thermal conductivity lower than or equal to 2,5 mW/mK, — an internal pressure below 1,0 Pa, — an ambient temperature during operation of – 50 °C or more but not more than 80 °C

0.5348 ex 7020 00 10 10 Television pedestal stands with or without bracket for fixation to and stabilization of 0 % p/st 31.12.2026 television cabinet case/body ex 7616 99 90 77

0.7266 ex 7020 00 10 20 Raw material for optical elements of fused silicon dioxide with: 0 % p/st 31.12.2027 — a thickness of 10 cm or more but not more than 40 cm, and — a weight of 100 kg or more

0.4127 ex 7201 10 11 10 Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, 0 % — 31.12.2026 a height of not more than 150 mm

0.4128 ex 7201 10 30 10 Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, 0 % — 31.12.2026 a height of not more than 150 mm, containing by weight not more than 1 % of silicon

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 233/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3353 7202 50 00 Ferro-silico-chromium 0 % — 31.12.2029

0.7502 ex 7318 24 00 40 Tube or pipe restraint joint elements: 0 % — 31.12.2029 — of stainless steel according to specification 17-4PH or of steel according to specification tool steel S7, — produced by metal injection moulding, — with a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/– 1), — measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm

0.4126 ex 7326 20 00 20 Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001 mm or more 0 % — 31.12.2026 but not more than 0,070 mm, compacted by sintering and rolling

0.6680 *ex 7326 90 98 40 Iron, steel and/or zinc alloy weights: 0 % — 31.12.2030 ex 7907 00 00 10 — with a weight of not more than 500 g and measuring not more than 107 mm x 107 mm x 11 mm, — whether or not with parts of other material, — whether or not with parts of other metals, — whether or not surface treated, — whether or not printed, of a kind used for the production of remote controls 234/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8480 ex 7326 90 98 60 Vane ring of a kind for fastening gas flow control blades: 0 % — 31.12.2027 — of iron or steel alloy, — with a heat resistance of 830 °C or more but not more than 1 050 °C, — with an external diameter of not more than 92 mm, — with holes for holding the gas flow control blades, for use in the manufacture of turbochargers(1)

0.8512 ex 7326 90 98 70 Disc of a kind for ensuring the gas flow channel width: 0 % — 31.12.2027 — of iron or steel alloy, — with a heat resistance of 830 °C or more but not more than 1 050 °C, — with an external diameter of not more than 92,5 mm, — with an internal diameter of not more than 62 mm, for use in the manufacture of turbochargers(1)

0.3352 ex 7410 21 00 10 Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as 0 % — 31.12.2029 filler or reinforced with glass-fibre fabric, covered on both sides with copper foil

0.7509 ex 7410 21 00 20 Foils, rolls composed of one layer of glass epoxy of 100 μm colaminated with refined copper 0 % m2 31.12.2029 foil on one or two sides of 35 μm with a tolerance of 10 % for use in the production of smart cards(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 235/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3005 ex 7410 21 00 30 Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one 0 % — 31.12.2029 side or on both sides with a copper foil

0.3926 ex 7410 21 00 40 Sheet or plates: 0 % — 31.12.2029 — consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or — consisting of multiple layers of paper, impregnated with phenolic resin, coated on one or both sides with a copper film with a maximum thickness of 0,15 mm

0.4479 ex 7410 21 00 50 Plates: 0 % — 31.12.2029 — consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin, — covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and — with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-650

0.7341 ex 7413 00 00 20 Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two 0 % — 31.12.2027 non-insulated copper cables, therein woven or pressed

0.7911 ex 7506 20 00 10 Sheets and strips in coils of nickel alloy C276 (EN 2.4819) with 0 % — 31.12.2029 — a thickness of 0,5 mm or more but not more than 3 mm, — a width of 770 mm or more but not more than 1 250 mm 236/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7913 *ex 7506 20 00 20 Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with: 0 % — 31.12.2030 — a thickness of 0,5 mm or more but not more than 3 mm, — a width of 250 mm or more but not more than 1 219 mm

0.2410 ex 7605 19 00 10 Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, 0 % — 31.12.2029 covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm

0.8344 ex 7605 21 00 10 Aluminium alloy wire with a diameter of 9,50 mm or more but not more than 19,15 mm, in 0 % — 31.12.2027 coils, for use in the manufacture of aeronautical fasteners(1)

0.8194 ex 7609 00 00 30 Aluminium connecting block for automotive air conditioning systems: 0 % — 31.12.2026 ex 8415 90 00 45 — with a T6 hardening, — equipped with round stubs with a circumferential outer groove, — with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm, — with a distance between holes of 15 mm or more but not more than 22 mm, — with sockets designed for brazing or clamping, — with mounting holes for M6 or M8 mounting screw, threaded or not, — with a width of 5 mm or more but not more than 16 mm, — for connecting a compressor, a condenser, an evaporator, a chiller and other lines

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 237/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8464 ex 7609 00 00 40 Flame brazed aluminium block for connecting tubes in automotive heat exchangers and/or 0 % p/st 31.12.2027 turbocharged air coolers and/or automatic transmission coolers: — with extruded, bent connection tubes with an outer diameter of 5 mm or more, but not more than 25 mm, — with a weight of 0,02 kg or more, but not more than 0,25 kg, for use in the manufacture of cooling system in vehicles of Chapter 87(1)

0.8503 ex 7609 00 00 50 Machined aluminium components: 0 % p/st 31.12.2027 — containing by weight 0,55 %, or more but not more than 0,61 % of magnesium, — containing by weight 0,55 %, or more but not more than 0,61 % of silicon, — with a hardening state of T5 or T6, — with a mass of 0,05 kg or more, but not more than 0,2 kg, for use in the manufacture of CO cooling systems in motor vehicles(1) 2 238/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8493 ex 7609 00 00 60 Aluminium connection block: 0 % p/st 31.12.2027 — with a weight of 3 g or more but not more than 400 g, — manufactured from 6061-T6 or 6060-T6 or 6082-T6 aluminium grade, — being an integral part of an air conditioning hose assembly or oil cooling line hose assembly or air brake line hose assembly or water cooling line hose assembly, — with holes (sockets) or splines (pilots) or threads that allow installation in an automotive or other air conditioning system (also understood as installation in the line), — with sockets designed for brazing or fastening, — with at least 1 through-hole with a diameter of 3 mm or more but not more than 25 mm, for the manufacture of automotive cooling and air conditioning systems(1)

0.5357 ex 7616 99 90 70 Connecting components for use in the production of helicopter tail rotor shafts(1) 0 % p/st 31.12.2026 ex 8482 80 00 10 ex 8807 30 00 40

0.6730 *ex 8101 96 00 10 Tungsten wire containing by weight 99 % or more of tungsten with: 0 % — 31.12.2030 — a maximum cross-sectional dimension of not more than 50 μm — a resistance of 40 Ω or more but not more than 300 Ω at length of 1 metre

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 239/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7245 ex 8101 96 00 20 Tungsten wire 0 % — 31.12.2027 — containing by weight 99,95 % or more of tungsten, and — with a maximum cross-sectional dimension of not more than 1,02 mm

0.5694 ex 8102 10 00 10 Molybdenum powder with: 0 % — 31.12.2027 — a purity by weight of 99 % or more and — a particle size of 1,0 μm or more, but not more than 5,0 μm

0.5097 ex 8104 30 00 35 Magnesium powder: 0 % — 31.12.2030 — of purity by weight of more than 99,5 %, and — with a particle size of not more than 0,8 mm

0.3416 ex 8108 20 00 10 Titanium sponge 0 % — 31.12.2029

0.4553 ex 8108 20 00 30 Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0 % — 31.12.2029 0,224 mm

0.3211 ex 8108 30 00 10 Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or 0 % — 31.12.2029 more but not more than 2 % of aluminium

0.4363 ex 8108 90 30 10 Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 65040 0 % — 31.12.2029 240/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7330 ex 8108 90 30 15 Rods and wire of an alloy of titanium with: 0 % — 31.12.2027 — a uniform solid cross-section in the form of a cylinder, — with a diameter of 0,8 mm or more, but not more than 5 mm, — an aluminium content by weight of 0,3 % or more, but not more than 0,7 %, — a silicon content by weight of 0,3 % or more, but not more than 0,6 %, — a niobium content by weight of 0,1 or more, but not more than 0,3 %, and — an iron content by weight of not more than 0,2 %

0.7942 *ex 8108 90 30 35 Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 0 % — 31.12.2030 99,9 % of a diameter less than 20 mm

0.4904 *ex 8108 90 30 45 Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and 0 % — 31.12.2030 complying with AMS standards 4928, 4965 or 4967

0.8105 *ex 8108 90 30 55 Wires of an alloy of titanium: 0 % — 31.12.2030 — with a niobium content by weight of 42 % or more, but not more than 47 %, — with a diameter of 2,36 mm or more, but not more than 7,85 mm, — in coils of 15 kg or more, but not more than 45 kg, — complying with standard AMS 4982

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 241/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7077 ex 8108 90 30 60 Forged cylindrical bars of titanium with: 0 % p/st 31.12.2026 — a purity of 99,995 % by weight or more, — a diameter of 140 mm or more but not more than 200 mm, — a weight of 5 kg or more but not more than 300 kg

0.5351 ex 8108 90 30 70 Wire of an titanium alloy containing by weight: 0 % — 31.12.2026 — 22 % (± 1 %) of vanadium, and — 4 % (± 0,5 %) of aluminium or — 15 % (± 1 %) of vanadium, — 3 % (± 0,5 %) of chromium, — 3 % (± 0,5 % of tin and — 3 % (± 0,5 %) of aluminium

0.7285 ex 8108 90 50 45 Cold or hot rolled plates, sheets and strips of non-alloyed titanium with: 0 % — 31.12.2027 — a thickness of 0,4 mm or more, but not more than 100 mm, — a length of not more than 14 m, and — a width of not more than 4 m

0.5352 ex 8108 90 50 55 Plates, sheets, strip and foil of an alloy of titanium 0 % — 31.12.2026 242/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6524 ex 8108 90 50 80 Plates, sheets, strips and foil of non-alloyed titanium 0 % — 31.12.2029 — of a width of more than 750 mm, — of a thickness of not more than 3 mm

0.6500 ex 8108 90 50 85 Strip or foil of non-alloyed titanium: 0 % — 31.12.2029 — containing more than 0,07 % by weight of oxygen (O), 2 — of a thickness of 0,4 mm or more but not more than 2,5 mm — conforming to the Vickers hardness HV1 standard of not more than 170 of a kind used in the manufacture of welded tubes for nuclear power plant condensers

0.5353 ex 8108 90 90 30 Parts of spectacle frames and mountings, including 0 % p/st 31.12.2026 ex 9003 90 00 20 — temples, — blanks of a kind used for the manufacture of spectacle parts and — bolts of the kind used for spectacle frames and mountings, of a titanium alloy

0.8909 *ex 8109 29 00 10 Non-alloy zirconium sponges or ingots containing by weight more than 0,01 % of hafnium 0 % — 31.12.2030 for use in the manufacture of tubes, bars or ingots enlarged by remelting for the non-nuclear industry(1)

0.3415 ex 8110 10 00 10 Antimony in the form of ingots 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 243/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3413 ex 8112 99 50 10 Alloy of niobium (columbium) and titanium, in the form of bars and rods 0 % — 31.12.2029

0.4316 ex 8113 00 90 10 Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits 0 % — 31.12.2027

0.6805 *ex 8113 00 90 20 Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in 0 % — 31.12.2030 IGBT-modules

0.5570 ex 8207 30 10 10 Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, 0 % p/st 31.12.2027 punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles(1)

0.5024 *ex 8301 60 00 30 Silicone or plastic keyboards, comprising: 0 % p/st 31.12.2030 ex 8419 90 85 40 — parts of common metal, and ex 8479 90 70 30 — whether or not comprising parts of plastic, ex 8481 90 00 50 — epoxy resin reinforced with fiberglass or wood, ex 8485 90 90 30 — whether or not printed or surface-treated, ex 8503 00 99 43 — with or without electrical conductors, ex 8515 90 80 40 — with or without a membrane bonded to the keyboard, ex 8537 10 98 55 — with or without mono or multilayer protective film ex 8538 90 99 70 ex 8708 99 10 55 ex 8708 99 97 22 244/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8247 ex 8302 10 00 20 Armrest hinge made of magnesium with: 0 % — 31.12.2026 — a length of 239 mm or more but not more than 270 mm, — a width of 150 mm or more but not more than 175 mm, — a height of 110 mm or more but not more than 135 mm, — mounting holes for a lock mechanism

0.8304 ex 8302 30 00 20 Two cold-formed steel supports: 0 % — 31.12.2026 — with a length of 120 mm or more but not more than 180 mm, — with a width of 50 mm or more but not more than 80 mm, — with a height of 35 mm or more but not more than 80 mm, — with a movable riveted connection, — with or without elastomeric bumper, — forming a mechanism for indirect movement of the mechanism of the longitudinal positioner of car seats, interacting with the safety latch, — attached to the mechanism of the longitudinal positioner by means of a detachable screw connection, riveting, welding or spot welding

0.2602 ex 8309 90 90 10 Aluminium can ends: 0 % p/st 31.12.2027 — with a diameter of 99,00 mm or more but not more than 136,5 mm (± 1mm), — whether or not with a “ring-pull” aperture

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 245/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3947 *ex 8401 30 00 20 Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors(1) 0 % — 31.12.2029

0.6319 ex 8401 40 00 10 Stainless steel absorber control rods, filled with neutron absorbing chemical elements 0 % p/st 31.12.2029

0.8668 ex 8402 90 00 10 Pre-assembled process module unit of an ethane cracker unit, containing: 0 % — 30.06.2026 — a dilution steam generator system which produces steam from pretreated quench water for use as dilution steam in steam cracking furnaces, — a condensate system that collects, filters and deaerates steam condensates, which are subsequently recycled as boiler feed water and further distributed within the cracker unit, and — a flare system that collects, separates and vaporizes non-recyclable hydrocarbon containing releases from different equipment in a steam cracker, and transfers those towards flares

0.8818 ex 8406 81 00 10 Industrial steam turbine with: 0 % — 31.12.2029 — an output of more than 40 MW but not more than 90 MW, — designed for a pressure of not more than 165 bar and a temperature of not more than 565 °C, — equipped with double seat valves on the live steam side which are operated with a hydraulic servo of not more than 30 bar 246/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8012 *ex 8406 82 00 10 Industrial steam turbine with: 0 % — 31.12.2030 — an output of 2 MW or more but not more than 40 MW, — designed for a pressure of not more than 140 bar and a temperature of not more than 540 °C, — equipped with single – or double seat valves on the live steam side which are operated with a hydraulic servo of not more than 30 bar

0.3830 ex 8407 33 20 10 Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder 0 % — 31.12.2027 capacity of not less than 300 cm3 and a power of not less than 6 kW or more but not more ex 8407 33 80 10 than 20,0 kW, for the manufacture of:

ex 8407 90 80 10 — lawn mowers of subheadings 8433 11, 8433 19 and 8433 20, ex 8407 90 90 10 — tractors of subheadings 8701 91 90, 8701 92 90 whose main function is that of a lawn mower, — four stroke mowers with motor of a cylinder capacity of not less than 300 cm3 of subheading 8433 20 10 or — snowploughs and snow blowers of subheading 8430 20(1)

0.8753 ex 8407 33 80 20 New, single-cylinder, four stroke, spark-ignition internal combustion engine with: 0 % — 31.12.2029 — a cylinder capacity exceeding 500 cm3 but not exceeding 1 000 cm3, — overall dimensions of not more than: 490 mm (length) x 390 mm (width) x 590 mm

(height), — a power of 22 kW or more but not more than 35 kW, — equipped with output shaft having an end diameter of 30 mm and a taper of 6 degrees (± 1 degree), — whether or not equipped with starter, throttle body, spark plug wire, fuel rail and injector, for use in the manufacture of all-terrain or utility task vehicles(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 247/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8754 ex 8407 33 80 30 New, twin-cylinder, four-stroke, spark-ignition internal combustion engine with: 0 % — 31.12.2029 — a cylinder capacity exceeding 500 cm3 but not exceeding 1 000 cm3, — overall dimensions of not more than: 470 mm (length) x 450 mm (width) x 600 mm

(height), — a power of 40 kW or more but not more than 86 kW, — whether or not equipped with overhead camshaft, starter motor, spark plug wires, fuel rail and injectors, for use in the manufacture of all-terrain or utility task vehicles(1)

0.8260 ex 8407 34 10 10 Spark-ignition reciprocating or rotary internal combustion piston engines, with: 0 % — 31.12.2026 — a cylinder capacity of 1 200 cm3 or more but not more than 2 000 cm3 — a power of 95 kW but not more than 135 kW, — a weight of not more than 120 kg, for use in the manufacture of motor vehicles of heading 8703(1)

0.8751 ex 8407 34 91 10 New dual cylinder, four stroke internal combustion spark-ignition engine with: 0 % — 31.12.2029 — a cylinder capacity exceeding 1 000 cm3 but not exceeding 1 250 cm3, — overall dimensions of not more than: 700 mm (length) x 430 mm (width) x 610 mm

(height), — a power of 60 kW or more but not more than 110 kW, — whether or not equipped with a starter, outfitted with a throttle body, two or more fuel injectors, a stator, for use in the manufacture of motorcycle bikes(1) 248/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8750 ex 8407 34 99 10 New dual cylinder, air cooled, four stroke 49 degree V-twin internal combustion 0 % — 31.12.2029 spark-ignition engine with: — a cylinder capacity exceeding 1 800 cm3, — overall dimensions of not more than: 800 mm (length) x 500 mm (width) x 600 mm

(height), — a power of 60 kW or more but not more than 75kW, — equipped with a dry sump system with an intermediate wet receptacle, — whether or not equipped with a starter, outfitted with a throttle body, two or more fuel injectors, a stator, for use in the manufacture of motorcycle bikes(1)

0.3828 ex 8407 90 10 10 Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the 0 % — 31.12.2026 manufacture of garden equipment of heading 8432, 8433, 8436 or 8508(1)

0.8403 ex 8407 90 10 40 A power unit with a two-stroke engine with: 0 % — 31.12.2027 — an output of 900 W or more, but not more than 1 100 W, — a cylinder displacement of more than 24 cm3 but not more than 30 cm3, — a rotation speed of more than 8 400 rpm but not more than 8 600 rpm at maximum power, — an idling speed of more than 2 800 rpm but not more than 3 200 rpm, and — a fuel tank with a capacity of 0,5 l or more, for use in the manufacture of garden machinery and garden machinery components(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 249/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4996 *ex 8407 90 90 20 Compact Liquid Petroleum Gas (LPG) Engine System, with: 0 % — 31.12.2030 — 6 cylinders, — an output of 75 kW or more, but not more than 80 kW, — inlet and exhaust valves modified to operate continuously in heavy duty applications, for use in the manufacture of vehicles of heading 8427(1)

0.8300 ex 8408 90 65 20 Compression-ignition internal combustion piston engines: 0 % — 31.12.2026 ex 8408 90 67 20 — of the inline type, ex 8408 90 81 20 — with a cylinder capacity of 7 000 cm3 or more but not more than 18 100 cm3, — with a power of 205 kW or more but not more than 597 kW, — with an exhaust after-treatment module, — with external width/height/depth dimensions of not more than 1 310/ 1 300/1 040 mm or 2 005/1 505/1 300 mm or 2 005/1 505/1 800 mm, for use in the manufacture of crushing, screening, separation or compost turning machines(1)

0.8610 ex 8409 91 00 28 Carburetor with: 0 % — 31.12.2028 — 2 mounting holes with a diameter of 31 mm, — a choke bore diameter of 18 mm or more, but not more than 19,05 mm for use in the manufacture of a two-stroke engine grass trimmer(1) 250/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8466 ex 8409 91 00 33 Camshaft carrier for a spark-ignition piston internal combustion engine, made of ADC12 0 % p/st 31.12.2027 aluminium alloy, with: — a weight of 4,0 kg or more but not more than 5,5 kg, — a wall thickness of 2,0 mm or more but not more than 6,0 mm, for use in the manufacture of motor vehicle engines(1)

0.8216 ex 8409 91 00 35 Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for 0 % — 31.12.2026

direct gasoline fuel injection with: — an operating pressure of not more than 22,5 MPa, — solenoid direct injector, — analog pressure sensor for not more than 22,5 MPa

0.8469 ex 8409 91 00 38 Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of ADC12 0 % — 31.12.2027 aluminium alloy, for use in the manufacture of motor vehicle engines(1)

0.7027 ex 8409 91 00 40 Fuel injector with solenoid valve for optimized atomization in the combustion chamber for 0 % — 31.12.2026 use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles(1)

0.7234 ex 8409 91 00 45 Metal alloy intake and exhaust valve, with a Rockwell hardness HRC 20 or more, for use in the 0 % — 31.12.2026 manufacture of spark or compression ignition engines of motor vehicles(1) ex 8409 99 00 70

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 251/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6752 ex 8409 91 00 50 Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, 0 % p/st 31.12.2029 whereby the hole has a diameter of 28 mm or more, but not more than 181 mm ex 8409 99 00 55

0.7961 *ex 8409 91 00 55 Nozzle body for the regulation of angle and distribution of fuel injection: 0 % — 31.12.2030 ex 8481 90 00 60 — of a cylindrical shape, — made of stainless steel, — with 4 or more, but not more than 16 holes, — with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute

0.7965 *ex 8409 91 00 75 Housing of fuel injection valve for generating an electromagnetic field to actuate the injection 0 % — 31.12.2030

valve with: — an inlet diameter of 2 mm or more, but not more than 10 mm, — an outlet diameter of 2 mm or more, but not more than 10 mm, — an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection, — a plastic covering moulded around a stainless steel tube 252/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7967 *ex 8409 91 00 80 Nozzle needle for opening and closing the flow of fuel in the engine, with: 0 % — 31.12.2030 ex 8481 90 00 70 — 2 holes, — 4 grooves, — a diameter of 3 mm or more, but not more than 6 mm, — a length of 25 mm or more, but not more than 35 mm, — made of stainless steel with hard-chrome plating

0.5199 ex 8409 99 00 10 Injectors with solenoid valve for optimised atomisation in the engine combustion chamber 0 % p/st 31.12.2026 ex 8479 90 70 85

0.7667 ex 8409 99 00 35 The exhaust gas recirculation assembly consisting of: 0 % — 31.12.2029 — a control unit, — an air throttle, — an intake pipe, — an outlet hose, for use in the manufacture of compression-ignition combustion engines of motor vehicles(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 253/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7718 ex 8409 99 00 75 High pressure fuel rail of galvanised ferrite-pearlite steel with: 0 % — 31.12.2029 — at least one pressure sensor and one valve, — a length of 314 mm or more but not more than 322 mm, — an operating pressure not more than 225 MPa, — an inlet temperature not more than 95 °C, — ambient temperature of – 45 °C or more but not more than 145 °C, for use in the manufacture of compression ignition engines of motor vehicles(1)

0.6751 ex 8411 99 00 20 Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: 0 % p/st 31.12.2027 — of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or

AMS AISI:686, — with a heat-resistance of not more than 1 100 °C, — with a diameter of 28 mm or more, but not more than 180 mm, — with a height of 20 mm or more, but not more than 150 mm

0.7225 ex 8411 99 00 30 Turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has 0 % p/st 31.12.2026 a diameter of 28 mm or more, but not more than 181 mm 254/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8851 ex 8412 21 80 30 Linear acting hydraulic cylinder of a kind used in the machines for handling cargo containers: 0 % — 31.12.2029 — with a weight of 45 kg or more but not more than 57 kg, — with a diameter of 119 mm or more but not more than 149 mm, — with a length of 779 mm or more but not more than 1 141 mm, — with a stroke of 450 mm or more but not more than 610 mm, — adapted to work with hydraulic oil at a working pressure of 22 MPa or more but not more than 23 MPa, — whether or not with a maintenance-free bearing without the need for lubrication

0.8850 ex 8412 21 80 40 Linear acting hydraulic cylinder of a kind used in the arms of machines for handling cargo 0 % — 31.12.2029

containers: — with a weight of 827 kg or more but not more than 935 kg, — with a diameter of 250 mm or more but not more than 330 mm, — with a length of 3 480 mm or more but not more than 4 115 mm, — with a stroke of 2 750 mm or more but not more than 3 180 mm, — adapted to work with hydraulic oil at a working pressure of 23 MPa, — whether or not with a maintenance-free bearing without the need for lubrication

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 255/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5975 ex 8412 39 00 20 Actuator for a single-stage turbocharger, with: 0 % p/st 31.12.2029 — a pressure inlet pipe and a control rod with a working stroke of 15 mm or more but not more than 40 mm, — a maximum length of the actuator including control rod of not more than 400 mm, — a maximum diameter of the can at the widest point of not more than 140 mm, and — a maximum height of the can without control rod of not more than 140 mm

0.8148 ex 8412 90 70 20 Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and 0 % p/st 31.12.2027 aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with:

— a length of 3,5 m or more but not more than 4,5 m, — a width of 2 m or more but not more than 4,2 m, — a height of 1 m or more, but not more than 1,3 m, — a weight of 11 tons or more but not more than 21,5 tons, — mounting bores for yawdrive, — a mounting flange for gearbox support, — drivetrain mount, — different screw sockets 256/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8079 *ex 8412 90 70 30 Gearbox support used as a support and load-carrying component between the gearbox and 0 % p/st 31.12.2030 the bedplate of a wind turbine, made of solution strengthened ductile iron castings (SSDI),

with: — a diameter of 2 m or more, but not more than 5 m, — a weight of 2 tons or more but not more than 7 tons

0.7161 ex 8413 30 20 30 Single-cylinder radial-piston high pressure pump for gasoline direct injection with: 0 % — 31.12.2026 — an operating pressure of 200 bar or more, but not more than 350 bar, — a flow control, and — a pressure relief valve, for use in the manufacture of engines of motor vehicles(1)

0.7969 *ex 8413 30 20 40 High-pressure plunger pump for direct diesel injection, with: 0 % — 31.12.2030 — an operating pressure of not more than 275 MPa, — a camshaft, — a fluid discharging of 15 cm3 per minute or more, but not more than 1 800 cm3 per minute, — an electric pressure regulating valve

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 257/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8215 ex 8413 30 20 60 High-pressure plunger pump for direct petrol injection: 0 % — 31.12.2026 — with an operating pressure of not more than 90 MPa, — designed to contact the crankshaft, — with an electromagnetic valve

0.8332 ex 8413 30 80 20 Electric water pump ensuring the functionality of the water circuit also when the motor is 0 % — 31.12.2027 temporarily switched off, for operating DC voltage of 9 V or more but not more than 16 V,

with: — capacity - pressure 0,075 MPa at 3 800 rpm, — discharge of 12 l/min, — whether or not with connecting cable with connector, and — mounting bracket, for use in the manufacture of goods of Chapter 87(1)

0.8185 ex 8413 70 51 20 Electric brushless direct current motor with single-stage, radial flow pump centrifugal single 0 % — 31.12.2026 entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1 800 W and soldered safety devices, monobloc with the motor, with:

— a discharge outlet diameter of 20 mm or more, — 9 slots stator, — 6 pole rotor, — rated power of 95 W, — volute with straight outlet, — rotor chamber without sand filter 258/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8186 ex 8413 70 51 30 Electric brushless direct current motor with single-stage, radial flow pump centrifugal single 0 % — 31.12.2026 entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1 800 W and soldered safety devices, monobloc with the motor, with:

— a discharge outlet diameter of 20 mm or more, — 9 slots stator, — 6 pole rotor, — rated power of 95 W, — volute with clamped rubber hose outlet, — rotor chamber without sand filter

0.8187 ex 8413 70 51 40 Electric brushless direct current motor with single-stage, radial flow pump centrifugal single 0 % — 31.12.2026 entry impeller mounted on motor’s shaft, monobloc with the motor, volute with integrated heater, with:

— a discharge outlet diameter of 20 mm or more, — 9 slots square or chain pole stator, — 6 pole rotor, — ferritic or rare earth magnets, — rated power of 95 W or 80 W, — heater of nominal power of 1 800 W and soldered or laser welded safety, devices, — volute with or without clamped rubber outlet, — rotor chamber with ultrasonic welded sand filter

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 259/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6346 ex 8413 91 00 30 Fuel pump cover: 0 % p/st 31.12.2029 — consisting of aluminium alloys, — with a diameter of 38 mm or 50 mm, — with two concentric, annular grooves formed on its surface, — anodized, of a kind used in motor vehicles with petrol engines

0.7669 ex 8414 10 25 30 Tandem pump consisting of: 0 % — 31.12.2029 — an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1 000 revolutions per minute, — vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of -666 mbar in 6 seconds at 750 revolutions per minute for use in the manufacture of engines of motor vehicles(1)

0.4727 ex 8414 30 81 50 Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power 0 % — 31.12.2029 rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment 260/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6160 ex 8414 30 81 60 Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants: 0 % — 31.12.2029 ex 8414 80 73 30 — driven by “on-off” single phase alternate current (AC) or “brushless direct current” (BLDC) variable speed motors, — with a nominal power rating of not more than 1,5 kW, — a rated voltage of 100 V or more but not more than 240 V, — with a height of not more than 300 mm, — an external diameter of not more than 150 mm, — with a unit weight of not more than 15 kg, for use in the manufacture of heat pumps for household appliances, including clothes dryers(1)

0.2593 ex 8414 30 89 20 Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of 0 % — 31.12.2029 a power of more than 0,4 kW but not more than 10 kW

0.8899 ex 8414 30 89 40 Electrical compressor for motor vehicle air conditioning system: 0 % p/st 31.12.2029 — with a power output of more than 0,4 kW but not exceeding 10 kW, for use in the manufacture of motor vehicles of subheading 8703 40(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 261/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8651 ex 8414 59 25 50 Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors 0 % — 31.12.2028 and the distribution of air with — a direct current operating voltage of more than 10 V but not more than 14 V, or — an alternating current operating voltage of more than 185 V, but not more than 254 V, — an operating temperature of – 40 °C or higher, but not higher than 70 °C, for use in the manufacture of heat pump tumble dryers and refrigerators or freezers(1)

0.8988 *ex 8414 59 25 60 Axial Fan, for incorporation into instrument clusters, speedometers and infotainment systems 0 % p/st 31.12.2030 of transport vehicles as motor vehicles of headings 8701 to 8705, with:

— an air flow of not more than 0,75 m3/min (cubic meter per minute) — an air pressure of not more than 10 mm HO 2 — an overall acoustic noise of not more than 45 dB(A) — a diameter of not more than 65 mm

Equipped with DC Brushless motor with: — a rated voltage between: 3 to 16 VDC — an operating voltage between: 3 to 16 VDC — a rated current between: 0,03 to 0,30 A — an input power between: 0,3 to 1,5 W — a rotation speed between: 2 500 to 10 000 rpm, With or without a heat sink incorporated 262/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7595 ex 8414 59 35 20 Radial fan, with: 0 % — 31.12.2029 — a dimension of 25 mm (height) x 85 mm (width) x 85 mm (depth), — a weight of 120 g, — a rated voltage of 13,6 VDC (direct current voltage), — an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage), — a rated current of 1,1 A (TYP), — a rated power of 15 W, — a rotation speed of 500 rpm (revolutions per minute) or more but not more than 4 800 rpm (revolutions per minute) (free flow), — an air flow of not more than 17,5 litre/s, — an air pressure of not more than 16 mm HO ≈ 157 Pa, 2 — an overall sound pressure of not more than 58 dB(A) at 4 800 rpm (revolutions per minute), and with a FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems

0.8207 ex 8414 59 35 30 Electric blower for cooling the high-voltage battery of a hybrid passenger car with: 0 % — 31.12.2026 — a control unit, — MOSFET inverter, — a voltage of 9 V or more but not more than 16 V, — ambient temperature of – 40 °C or more, but not more than 80 °C, for use in the manufacture of hybrid passenger cars(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 263/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8648 ex 8414 59 35 40 Electric blower for cooling the battery module: 0 % — 31.12.2028 — with an operating voltage of 9 VDC or more but not more than 16 VDC, — with a centrifugal electric fan, — with a connector, — with a plastic case, — with or without a control unit for the fan electric motor, for use in the production of rechargeable batteries for hybrid and electric vehicles(1)

0.7317 ex 8414 80 22 20 Air membrane compressor with: 0 % — 31.12.2027 — a flow of 4,5 l/min or more, but not more than 12 l/min, — power input of not more than 14 W, and — a gauge pressure capacity not exceeding 400 hPa (0,4 bar), of a kind used in the production of motor vehicle seats 264/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8133 *ex 8414 80 73 50 Hermetic heat pump compressor for R450A or R290 refrigerants: 0 % — 31.12.2030 — not charged with refrigerant, — pre-charged with lubricant oil, — with a single phase induction permanent split capacitor motor or a DC brushless motor, — having suction and/or discharge connections, — with a displacement of 8,05 cm3 or more, but not more than 55 cm3, — running at 900 rpm or more, but not more than 7 800 rpm, and — with a cooling capacity of 920 W or more, but not more than 10 440 W in ASHRAE conditions

0.8483 ex 8414 90 00 15 Fan assembly made of aluminium and magnesium alloy: 0 % — 31.12.2027 — with an outer diameter of 54 mm or more but not more than 130 mm, — with a height of 8 mm or more but not more than 30 mm, — with two discs connected by blades of involute shape, — with or without dowel, and with or without washer, for use in the manufacture of electromotors(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 265/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2507 ex 8414 90 00 20 Aluminium pistons, for incorporation into compressors of air conditioning machines of 0 % p/st 31.12.2029 motor vehicles(1)

0.8494 ex 8414 90 00 25 Scroll type compressor housing of an aluminium alloy of a kind with: 0 % — 31.12.2027 — a heat resistance of 200 °C or more but not more than 250 °C, — one or more fixing points suitable for mounting an actuator, for use in the manufacture of turbochargers(1)

0.8792 ex 8414 90 00 35 Compressor head unit made of impregnated aluminium alloy for installation in 0 % — 31.12.2029 air-conditioning compressors for motor vehicles with: — a width of 115 mm or more but not more than 160 mm, — a length of 115 mm or more but not more than 170 mm, — a height of 30 mm or more but not more than 100 mm, — a piece of pressure branch with pipe connection, — one or two mounting holes and — more than one overflowing hole 266/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8785 ex 8414 90 00 45 Pressure casted rotor front plate or cover of an electric supercharger: 0 % — 31.12.2029 — of EN AC-46000 aluminium, — shot-blasted and machined, — with a hardness of 60 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506), — with a tensile strength of 240 N/mm2 or more, — with a height of 22 mm or more but not more than 26 mm, — with a diameter of 128 mm or more but not more than 136 mm, — with a weight of 220 g or more but not more than 250 g

0.8964 *ex 8414 90 00 55 Air conditioning compressor housing component made of aluminium alloy for installation in 0 % — 31.12.2030

electric air conditioning compressors for motor vehicles: — with a width of 100 mm or more but not more than 220 mm, — with a length of 100 mm or more but not more than 230 mm, — with a height of 80 mm or more but not more than 180 mm, — with one single central bore, — machined by CNC milling or unwrought, — whether or not impregnated, — with one suction port or without

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 267/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8465 ex 8415 90 00 15 Electrically welded manifolds for the condenser in automotive air conditioning systems: 0 % p/st 31.12.2027 — consisting of a tube produced by stamping an aluminium strip and joining the edges by electric arc welding, — containing internal baffles responsible for the proper flow of coolant, — with a length of 190 mm or more, but not more than 460 mm, — with a diameter of 9 mm or more, but not more than 42 mm, — with a weight of 0,01 kg or more, but not more than 0,45 kg, — whether or not having aluminium connection blocks, used in the production of air conditioning systems in vehicles of Chapter 87(1)

0.6842 *ex 8415 90 00 60 Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning 0 % p/st 31.12.2030 systems, with: — extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm, — a weight of 0,02 kg or more but not more than 0,25 kg

0.7996 *ex 8418 99 90 20 Aluminium connecting block for connecting to a condenser manifold in welding process: 0 % p/st 31.12.2030 — hardened to T6 or T5 temper, — with a weight of not more than 150 g, — with a length of 20 mm or more but not more than 150 mm, — with a fixing rail in one piece 268/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8004 *ex 8418 99 90 30 Receiver dryer profile for connecting to a condenser manifold in welding process with: 0 % p/st 31.12.2030 — a braze flatness of not more than 0,2 mm, — a weight of 100 g or more but not more than 600 g, — a fixing rail in one piece

0.8856 ex 8418 99 90 40 An evaporator being a type of heat exchanger, consisting of aluminium pipes with copper 0 % — 31.12.2029

ends enclosed with aluminium radiators: — measuring 403 x 276 x 70 mm or more, but not more than 464 x 399 x 83 mm, — with a total weight of a set of 236 g or more, but not more than 1 010 g, — with a fixed sensor, — with noise absorber, — with 2, 5 or 7 control and power connection pins terminated with sensor temperature, heater or fuse type of socket, for use in the manufacture of products of subheadings 8418 10, 8418 21, 8418 40(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 269/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8976 *ex 8418 99 90 50 Heat exchanger evaporator, used in domestic refrigerators and freezers and their 0 % — 31.12.2030

combinations: — with external dimensions of 362 mm x 244 mm x 60 mm or more but not more than 398,4 mm x 503 mm x 60 mm, — with 229 mm to 307 mm aluminium radiator fins with external dimensions of 60 mm x 26,7 mm or more but not more than 60,2 mm x 27,3 mm, — with an aluminium tube with an external diameter of 8,3 mm or more but not more than 8,5 mm, — with not more than two heaters with a power of 40 W or more but not more than 140 W, equipped with cables with connectors, — with or without two thermal fuses with a melting point of 77 °C, equipped with cables with connectors

0.8978 *ex 8418 99 90 60 Condenser for refrigerators or refrigerators with freezers of the household type equipped at 0 % — 31.12.2030

least with: — a steel pipe with a diameter from 4,68 mm to 4,81 mm, a wall thickness from 0,52 mm to 0,65 mm, — 26-30 pcs of horizontal pipe sections, each straight with a length from 450 mm to 455 mm, placed every 40 mm between each horizontal part, — from 112 to 174 pcs welded steel rods with a diameter of 1,3 mm and a length of 1 002 mm or more but not more than 1 322 mm, — 3 clips, — 4 brackets welded between the rods 270/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8669 ex 8419 40 00 10 Pre-assembled process module unit of an ethane cracker unit, containing: 0 % — 30.06.2026 — quench water circulation loops, which contain a heat exchanger and circulation pumps to cool and recirculate quench water, — a water purification system, which removes hydrocarbon contaminants from quench water which is then re-used for dilution steam production (outside the module), — a pyrolysis oil purification system, which separates pyrolysis gasoline, heavy oil and coke fractions from the hydrocarbon contaminants that have been removed from the quench water, — an ethane feedstock start-up vaporizer and superheater, which vaporizes and heats ethane feedstock before sending the ethane to the cracking furnaces (outside the module), — a propane feedstock preparation system, which filters, vaporizes and superheats propane feedstock, before sending the propane to cracking furnaces (outside the module), and — a chemical grade propylene preparation system, which filters and dries chemical grade propylene before sending it to the deethanizer (outside the module)

0.8680 ex 8419 50 80 20 Pre-assembled process module unit of an ethane cracker unit, containing: 0 % — 30.06.2026 — an open loop ethylene refrigeration system, which is to be integrated with an external ethylene refrigerant compressor, — pumps and a heat exchanger to deliver ethylene to an external pipeline, and — a closed loop propylene refrigeration system, which is to be integrated with an external propylene refrigerant compressor

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 271/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8747 *ex 8419 50 80 30 Aluminium heat exchanger for gas boilers designed for heat transfer: 0 % — 31.12.2029 — with a height of 100 mm or more, but not more than 150 mm, — with a width of 235 mm or more, but not more than 300 mm, — with a length of 240 mm or more, but not more than 300 mm, — for a power output of 25 kW or more, but not more than 35 kW, — with a weight of 8 kg or more, but not more than 10 kg

0.8675 ex 8419 89 98 10 Pre-assembled process module unit of an ethane cracker unit, containing: 0 % — 30.06.2026 equipment associated with an external multi-stage, centrifugal cracked gas compressor which compresses hydrocarbon gases to allow further processing downstream in interconnected

equipment containing: — coolers, — vapor-liquid separation drums, and — pumps needed to condense and remove water and heavier hydrocarbons and to avoid undesirable formation of polymer by-products,

equipment associated with an external caustic wash tower containing: — caustic water circulation pumps to support an external caustic wash tower in removing acid gasses (carbon dioxide and hydrogen sulphide) from the cracked gas, — a spent caustic pre-treatment system, containing separation drums, pumps and mixers, — a heat exchanger for the pre-cooling of cracked gas, and — a separation drum for the removal of water from cracker gas 272/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6193 ex 8431 20 00 40 Aluminium core, plastic tank radiator, with integral steel support structure and an open core 0 % p/st 31.12.2029 square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 8427(1)

0.8853 ex 8431 20 00 70 Container spreader for lifting empty 20' and 40' cargo containers: 0 % — 31.12.2029 — without an integrated carriage, — suitable for machines with a load capacity of not more than 11 000 kg, — designed to carry one or two containers at a time, — with a top or side mounting, — with an anti-corrosion layer coated, — with a weight of 3 200 kg or more but not more than 4 000 kg for use in the manufacture of self-propelled container handlers(1)

0.6821 *ex 8436 99 00 10 Part containing: 0 % p/st 31.12.2026 — a single-phase AC motor, — an epicyclic gearing, — a cutter blade,

and whether or not containing: — a capacitor, — a part fitted with a threaded bolt, for use in the manufacture of garden shredders(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 273/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3374 ex 8439 99 00 10 Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, 0 % p/st 31.12.2029 of a length of 3 000 mm or more and an external diameter of 550 mm or more

0.8632 ex 8467 99 00 10 Pole hedge trimmer cutting elements: 0 % — 31.12.2028 — in the form of hedge trimmer attachment, — with a knife length of 60 cm and teeth opening of 30 mm, — with angle adjustment of the blade, — with integrated single stage gearbox, — with a magnesium cast body, for use in the manufacture of garden machinery and power tools(1)

0.2599 ex 8477 80 99 10 Machines for casting or for surface modification of plastic membranes of heading 3921 0 % p/st 31.12.2029

0.8123 *ex 8479 89 97 28 Integrated electric brake unit for immediate generation of the hydraulic pressure during 0 % — 31.12.2030 braking, full electronic brake control and enabling regenerative braking of motor vehicles

with: — electronic brake assistants, — hydraulic unit driven by brushless electric motor, — brake fluid reservoir, for use in the manufacture of hybrid passenger cars(1) 274/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8673 ex 8479 89 97 33 Pre-assembled process module unit of an ethane cracker unit, containing: 0 % — 30.06.2026 — various distillation columns (depropanizer, debutanizer and degreenoiler) and their associated heat exchangers, pumps and drums, — a chilling train containing heat exchangers and a drum which condenses C2 in a gas stream, — a system to separate hydrogen and methane from cracked gas containing heat exchangers, drums, turbines, compressors and a hydrogen purification unit (pressure swing adsorption unit), — associated equipment of a C3 splitter distillation column, containing heat exchanger, pumps and drums, and — a vinyl acetylene hydrogenation system, containing hydrogenation reactors, filters, mixer, drum, condenser, heat exchangers

0.8206 ex 8479 89 97 38 Camshaft actuator for controlling the timing of valve opening by using electromotor in 0 % — 31.12.2026 a continuous variable valve timing system of an internal combustion piston engine, of:

ex 8501 31 00 68 — a length of 110 mm or more but not more than 140 mm, — a width of 90 mm or more but not more than 130 mm, — a height of 80 mm or more but not more than 110 mm for use in the manufacture of engines of motor vehicles(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 275/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8681 ex 8479 89 97 43 Pre-assembled process module unit of an ethane cracker unit, containing: 0 % — 30.06.2026 — a system for filtering and cooling of dried cracked gas, — a deethanizer distillation column and associated equipment for C2-/C3+ separation, — an acetylene hydrogenation system to remove acetylene within a C2 stream, — a fuel gas drum that stores fuel gas for cracker furnaces, and — a system to regenerate dryers in a cracker installation

0.6230 ex 8479 89 97 60 Bioreactor for biopharmaceutical cell culture 0 % p/st 31.12.2026 — having interior surfaces of austenitic stainless steel, and — with a process capacity up to 15 000 litres, — whether or not combined with a “clean-in-process” system and/or a dedicated paired media hold vessel

0.7964 *ex 8479 90 70 40 Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the 0 % — 31.12.2026

camshaft compared to the crankshaft: — of a circular shape, — made of steel alloy with sintering process, — with not more than 8 oil chambers, — with a Rockwell hardness of 55 or more, — with a density of 6,5 g/cm3, or more, but not more than 6,7 g/cm3 276/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7424 ex 8481 10 99 40 Pressure reducing valves in a brass case with: 0 % — 31.12.2027 — a length of not more than 30 mm (± 1 mm), — a width of not more than 18 mm (± 1 mm), of a kind used for incorporation in fuel delivery modules of motor vehicles

0.7968 *ex 8481 30 91 30 Mechanical check (non-return) valve for opening and closing of the flow of fuel: 0 % — 31.12.2026 ex 8481 30 99 50 — with an operating pressure of not more than 250 MPa, — with a flow rate of 45 cm3/minute or more, but not more than 55 cm3/minute, — with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm, — made of steel

0.4668 ex 8481 30 91 91 Steel check (non-return) valves with: 0 % p/st 31.12.2029 — an opening pressure of not more than 800 kPa, — an external diameter not more than 37 mm

0.7155 ex 8481 80 59 20 Pressure regulating valve for incorporation into compressors of motor vehicle air condition 0 % p/st 31.12.2026 units(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 277/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7380 ex 8481 80 59 30 Two-way flow control valve with housing, with: 0 % — 31.12.2029 — at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter, — at least 330 cm3/minute, but not more than 5 000 cm3/minute flow rate, — at least 19, but not more than 300 MPa operating pressure

0.7377 ex 8481 80 59 40 Flow-control valve: 0 % — 31.12.2027 — made of steel, — with an outlet hole with a diameter of 0,05 mm or more, but not more than 0,5 mm, — with an inlet hole with a diameter of 0,1 mm or more, but not more than 1,3 mm, — with chromium nitride coating, — with a surface roughness of Rp 0,4

0.7381 ex 8481 80 59 50 Electromagnetic valve for quantity control with: 0 % — 31.12.2027 — a plunger, — a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2 Ohm

0.7382 ex 8481 80 59 60 Electromagnetic valve for quantity control 0 % — 31.12.2027 — with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH 278/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7960 *ex 8481 80 59 70 Flow-control valve 0 % — 31.12.2030 ex 8481 90 00 80 — made of steel, — with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm, — with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm

0.8814 ex 8481 80 59 80 Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump: 0 % — 31.12.2029 — with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector, — with an operating pressure of not more than 5,5 bar, — with an operating voltage of 9 VDC or more but not more than 16 VDC, — with a valve’s base width of 22 mm or more but not more than 27 mm, — with a valve’s length of 55 mm or more but not more than 110 mm, for use in the manufacture of motor vehicle engines(1)

0.5575 ex 8481 80 69 60 Four-way reversing valve for refrigerants, consisting of: 0 % p/st 31.12.2027 — a solenoid pilot valve — a brass valve body including valve slider and copper connections with a working pressure up to 4,5 MPa

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 279/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7519 ex 8481 80 73 20 Pressure- and flow-control valve controlled by external electromagnet: 0 % — 31.12.2029 ex 8481 80 99 70 — made of steel and/or steel alloy(s), — without integrated circuit, — of not more than 1 000 kPa operating pressure, — with a flow quantity of not more than 5 l/min, — without an electromagnet

0.8956 *ex 8481 80 79 40 Service valve which suits for R410A or R32 gas while connecting indoor and outdoor units 0 % — 31.12.2030

with: — a withstanding pressure of the valve body of 6,3 MPa, — a leakage ratio of less than 1,6 g/a, — an impurity ratio of less than 1,2 mg/PCS, — an airtight pressure of the valve body of 4,2 Mpa for use in the manufacture of air conditioners(1) 280/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8752 ex 8481 80 99 80 Solenoid valve for combustion engine continuous variable valve timing system to control oil 0 % — 31.12.2029

flow as a function of engine speed and load: — in metal cover, — with electrical connector, — with a force of not more than 10 N, — with an operating voltage of 9 VDC or more but not more than 16 VDC, — with a length of 80 mm or more but not more than 110 mm, — with a width of 80 mm or more but not more than 110 mm, — with a height of 20 mm or more but not more than 30 mm, for use in the manufacture of engines of motor vehicles(1)

0.8784 ex 8481 90 00 25 Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation 0 % — 31.12.2029 systems, comprising the following features: — high-pressure die-cast aluminium EN AC-46000, — shot-blasted and machined, — height of 100 mm or more but not exceeding 135 mm, — width of 115 mm or more but not exceeding 150 mm, — weight of 210 g or more but not more than 500 g

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 281/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7735 ex 8482 10 10 15 Ball bearings with: 0 % — 31.12.2029 — an internal diameter of 4 mm or more but not more than 9 mm, — an external diameter of not more than 26 mm, — a width of not more than 8 mm, for use in the manufacture of electromotors with a range of 40 000 rpm or more but not more than 80 000 rpm(1)

0.8098 *ex 8482 50 00 20 Axial roller bearing made of steel: 0 % p/st 31.12.2030 — the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98, — the rollers are made of anti-friction steel according to ASTM 295-94, — with an external diameter of 63 mm or more but not more than 66 mm, — with an internal diameter of 44 mm or more but not more than 46 mm, — with a weight of 23 g or more but not more than 27 g, — with 36 rollers or more but not more than 38 rollers

0.8588 ex 8483 10 95 30 Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with: 0 % — 31.12.2028 — external toothing in a diametral pitch standard, — 17 teeth or more, but not more than 50 teeth, — a diameter of 35 mm or more, but not more than 145 mm, — a length of 200 mm or more, but not more than 1 345 mm, — a hardness of 35 HRC or more, but not more than 45 HRC 282/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8746 ex 8483 10 95 40 Stepped shaft made of carbon steel with: 0 % — 31.12.2029 — rolled, involute profiled, splined shaft end, the helix angle of which is at least 0o15,5’ but not more than 0o21,5’, — a largest diameter of 16 mm or more, but not more than 18 mm, — a length of 137 mm or more, but not more than 155 mm, — a weight of 0,12 kg or more, but not more than 0,28 kg

0.8857 ex 8483 10 95 50 Drum shaft for torque transmission, in steel (to SM45C for shaft standard and STS430 for ring 0 % — 31.12.2029 standard) with: — a length of 137,8 mm or more but not more than 138,2 mm, — an outer diameter of 23 mm or more but not more than 48,025 mm, — a weight of 1,0245 kg or more but not more than 1,0445 kg, — a hardness of the shaft of 40 or more on the Rockwell C hardness scale (HRC), but not more than 50 HRC, — a ring hardness of 90 or more on the Rockwell B hardness scale (HRB), but not more than 120 HRB, — an external 37-teeth spline with major diameter of 41 mm or more but not more than 48 mm

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 283/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5744 ex 8483 30 32 30 Bearing housing of a kind used in turbochargers: 0 % p/st 31.12.2027 ex 8483 30 38 60 — of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560, — with oil chambers, — without bearings, — with a diameter of 50 mm or more, but not more than 250 mm, — with a height of 40 mm or more, but not more than 150 mm, — whether or not with water chambers and connectors

0.8626 ex 8483 40 23 20 Bevel gear: 0 % — 31.12.2028 — made of lightweight alloys and steel, — built on straight or helical bevel gears, — with an angle between the shafts of 30 degrees or more but not more than 90 degrees — with a gear 1:1,3 ratio or more but not more than 1:1,46, for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery(1) 284/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8625 ex 8483 40 23 30 Bevel gear: 0 % — 31.12.2028 — made of lightweight alloys and steel, — built on straight bevel gears, — with an angle between the shafts of 24 degrees or more but not more than 35 degrees, for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery(1)

0.8303 ex 8483 40 25 20 Worm gearbox: 0 % — 31.12.2026 — in an aluminium alloy housing, — with a plastic or steel worm, — with mounting holes, — with a 90 degree reversible drive direction, — with a 4:19 transmission ratio, — equipped with a lead screw with a length of 310 mm or more but not more than 380 mm, — with a guide nut incorporated into the assembly bracket, — with or without a lead screw support, for indirect connection to the drive motor of a car seat guide system(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 285/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5202 ex 8483 40 29 50 Gear set of cycloid gear type with: 0 % p/st 31.12.2026 — a rated torque of 50 Nm or more but not more than 9 000 Nm, — standard ratios of 1:50 or more but not more than 1:475, — lost motion of not more than one arc minute, — an efficiency of more than 80 % of a kind used in robot arms

0.5977 ex 8483 40 29 60 Epicyclic gearing, of a kind used in driving hand-held power tools with: 0 % p/st 31.12.2029 — a rated torque of 25 Nm or more, but not more than 70 Nm, — standard gear ratios of 1:12,7 or more, but not more than 1:65,3

0.8585 ex 8483 40 29 70 Cast steel planetary cage, with: 0 % — 31.12.2028 — external or internal toothing in a diametral pitch standard, — 27 teeth or more, but not more than 70 teeth, — a diameter of 300 mm or more, but not more than 725 mm, — a length of 225 mm or more, but not more than 800 mm, — 3 or 4 planetary gears, — a hardness of 40 HRC or more, but not more than 45 HRC 286/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7920 ex 8483 40 59 30 Hydrostatic speed changer: 0 % p/st 31.12.2029 — with a hydro pump and a differential with wheel axle, — whether or not with a fan impeller and/or a pulley, for use in the manufacture of lawn mowers of subheadings 8433 11 and 8433 19 or other mowers of subheading 8433 20(1)

0.4997 *ex 8483 40 90 80 Transmission gearbox, with: 0 % p/st 31.12.2030 — not more than 3 gears, — an automatic deceleration system, and — a power reversal system, for use in the manufacture of goods of heading 8427(1)

0.8100 *ex 8483 50 80 20 Pulley blocks of non-cast steel: 0 % p/st 31.12.2030 — made of structural carbon steel complying with standard JIS G4051, — with an external diameter of 104 mm or more but not more than 142 mm, — with an internal diameter of 33 mm or more but not more than 37 mm, — with a width of 22 mm or more but not more than 40 mm, — with a weight of 0,4 kg or more but not more than 1,6 kg, — with 4 trapezoidal grooves or more but not more than 7

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 287/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8540 ex 8483 50 80 30 Mechanical tensioner for maintaining the tension of the drive belts of a passenger car engine: 0 % — 31.12.2028 — with two pulleys made of polyamide, each of them with a diameter of 50 mm or more but not more than 70 mm, — with a spring made of a steel alloy containing chromium and silicon, — with two arms made of aluminium, — with a holder made of aluminium, for use in the manufacture of motor vehicle engines(1)

0.8984 *ex 8483 50 80 40 Flywheel designed for damping torsional vibrations and oscillations within a vehicle drivetrain 0 % — 31.12.2030

with: — a total moment of inertia of 0,082 kg·m2, — a weight of 7 kg or more, but not more than 8 kg, — a diameter of 250 mm or more, but not more than 280 mm, for use in the manufacture of motor vehicles(1)

0.8209 ex 8483 90 89 20 Sprocket for continuous variable valve timing to optimize the process of filling the cylinders 0 % — 31.12.2026

of an internal combustion engine with: — case, — rotor, — at least 4 screws, — spring, — of an external diameter of 80 mm or more but not exceeding 95 mm, — of a thickness of 25 mm or more but not more than 35 mm, for use in the manufacture of engines of motor vehicles(1) 288/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8584 ex 8483 90 89 30 Forged steel sprockets with external toothing, whether or not with internal splines in 0 % — 31.12.2028 a diametral pitch standard, with: — a diameter of 400 mm or more, but not more than 630 mm, — 7 teeth or more, but not more than 15 teeth, — a tooth core hardness of 28 HRC or more, but not more than 45 HRC, — a tooth surface hardness of 50 HRC or more, but not more than 60 HRC, — whether or not, a spline hardness of 30 HRC or more, but not more than 45 HRC, — an effective carburized case depth of 4 mm or more, but not more than 5 mm

0.8541 ex 8483 90 89 40 Steel alloy gear wheels with straight teeth and involute profile, with: 0 % — 31.12.2028 — external and/or internal toothing in a diametral pitch standard, — a diameter of 35 mm or more, but not more than 600 mm, — 13 teeth or more, but not more than 80 teeth, — a tooth core hardness of 28 HRC or more, but not more than 45 HRC, — a tooth surface hardness of 50 HRC or more, but not more than 65 HRC, — an effective carburized case depth of 1,00 mm or more, but not more than 3,1 mm, — a spline hardness of 27 HRC or more, but not more than 62 HRC, — whether or not in combination with a shaft with a spline hardness of 27 HRC or more, but not more than 62 HRC

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 289/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7156 ex 8484 20 00 10 Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture 0 % p/st 31.12.2026 of motor vehicle air condition units(1)

0.6854 ex 8501 10 10 20 Synchronous motor for a dishwasher with a water flow control mechanism with 0 % — 31.12.2027 — a length without axle of 24 mm (± 0,3), — a diameter of 49,3 mm (± 0,3), — a rated voltage of 220 V AC or more but not more than 240 V AC, — a rated frequency of 50 Hz or more but not more than 60 Hz, — an input power of not more than 4 W, — a rotation speed of 4 rpm or more but not more than 4,8 rpm, — an output torque of not less than 10 kgf/cm

0.7857 ex 8501 10 10 40 Synchronous hybrid stepper motor with: 0 % — 31.12.2029 — an output not exceeding 18 W, — two phases, — a rated current of not more than 2,5 A/phase, — a rated voltage of not more than 20 V, — with or without a threaded shaft, for use in the manufacture of 3D printers(1) 290/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8390 ex 8501 10 10 50 Linear actuator for automotive electric seat adjustment applications: 0 % — 31.12.2027 ex 8501 10 99 30 — consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew, — whether brushed or brushless, — whether or not with electronic control unit, — whether or not with Hall Effect Sensor, — with a nominal voltage of 8 V or higher but not higher than 16 V, — with a rated output mechanical power not exceeding 20 W, and — with a specified temperature range from – 40 °C to 160 °C, for use in the manufacture of automotive components for car seats(1)

0.8389 ex 8501 10 10 60 Rotary actuator for automotive electric seat adjustment applications: 0 % — 31.12.2027 ex 8501 10 99 40 — consisting of a permanently excited DC motor with an integrated gear mechanism, — whether brushed or brushless, — whether or not with electronic control unit, — whether or not with Hall Effect Sensor, — with a nominal voltage of 8 V or more but not more than 16 V, — with a rated output mechanical power not exceeding 35 W, and — with a specified temperature range from – 40 °C to 160 °C, for use in the manufacture of automotive components for car seats(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 291/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8394 ex 8501 10 99 20 Worm axis motor for automotive electric seat adjustment applications: 0 % — 31.12.2027 — consisting of a permanently excited DC motor with a worm wheel, — whether brushed or brushless, — whether or not with electronic control unit, — whether or not with Hall Effect Sensor, — with a nominal voltage of 8 V or more but not more than 16 V, — with a rated output mechanical power not exceeding 35 W, and — with a specified temperature range from – 40 °C to 160 °C, for use in the manufacture of automotive components for car seats(1)

0.8396 ex 8501 10 99 50 Electric (DC) motor powering height adjusting with: 0 % — 31.12.2027 — a rated output mechanical power not exceeding 35 W, — frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g, — a stall torque of 45 Nm and ultimate torque of 200 Nm, — a maximum current of 15 A, — no load speed of 7 rpm or more but not more than 10 rpm, — a rotation speed of 4 000 rpm or more but not more than 5 600 rpm, — a maximum noise level of 42 dB(A), — a maximum angular backlash up to 3 degrees, and — a 8 tooth pinion module, for use in the manufacture of automotive components for car seats(1) 292/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7197 ex 8501 10 99 56 DC Motor: 0 % — 31.12.2026 — with a speed rotation of not more than 7 000 rpm without load, — with a nominal voltage of not more than 18 V, — with a maximum power of 24 W, — for a specific temperature range from – 40 °C to 160 °C, — with or without a gear connection, — with or without a mechanical attachment interface, — with 2 electrical connections, — with a maximum torque of 100 Nm

0.7198 ex 8501 10 99 58 DC Motor: 0 % — 31.12.2026 — with a speed rotation of not more than 6 500 rpm (without load), — with a nominal voltage of 12 V (± 4 V), — with a maximal power below than 20 W, — with a specified temperature range from – 40 °C to 160 °C, — with a worm gear drive, — with a mechanical attachment interface, — with 2 electrical connections, — with a maximum torque of 75 Nm

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 293/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5846 ex 8501 10 99 60 DC motor: 0 % — 31.12.2027 — with a rotor speed of 3 500 rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded — with a power supply voltage of 100 V or more but not more than 240 V for use in the manufacture of electric fryers(1)

0.6858 ex 8501 10 99 64 DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and 0 % — 31.12.2026

EGR valve: — with Ingress Protection (IP) standard of IP69, — with a rotor speed of not more than 6 500 rpm when not loaded, — with a rated voltage of 12,0 V (± 0,1), — of a specified temperature range of – 40 °C or more but not more than + 165 °C, — with or without a connecting pinion, — with or without an engine connector, — with or without a flange, — with a diameter of not more than 40 mm (not including the flange), — with an overall height of not more than 90 mm (from the base to the pinion) 294/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6880 *ex 8501 10 99 65 Electric turbocharger actuator, with: 0 % — 31.12.2030 — a DC motor, — an integrated gear mechanism, — a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature, — a (pulling) force of 250 N or more in each position of its stroke, — an effective stroke of 15 mm or more but not more than 25 mm, — with or without an on-board diagnostics interface

0.6115 ex 8501 10 99 70 DC stepping motor, with: 0 % — 31.12.2029 — a two-phase winding, — a rated voltage of 9 V or more, but not more than 16,0 V, — of a specified temperature range of – 40 °C or more but not more than + 105 °C, — with or without connection pinion, — with or without motor drive connector

0.6627 *ex 8501 10 99 75 Permanently excited DC motor with 0 % — 31.12.2030 — a multiple-phase winding, — an external diameter of 24 mm or more but not more than 38 mm, — a rated speed of not more than 12 000 rpm, — a power supply voltage of 8 V or more but not more than 27 V, — with or without a pulley, — with or without a gear wheel

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 295/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2838 ex 8501 10 99 79 DC motor with brushes and an internal rotor with a three-phase winding, whether or not 0 % — 31.12.2029 equipped with a worm or a pinion, of a specified temperature range covering at least – 20 °C to + 70 °C

0.8345 ex 8501 20 00 50 Universal AC/DC motor, rotating: 0 % — 31.12.2027 — with a nominal supply voltage of 230 V, — with a power of more than 37,5 W but not more than 2 000 W, — with a stator cross-section of 93 mm or more but not more than 103 mm and a thickness of 15 mm or more but not more than 45 mm, and — with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances(1)

0.8349 ex 8501 20 00 60 Universal AC/DC motor, rotating: 0 % — 31.12.2027 — with a nominal supply voltage of 230 V, — with a power of more than 37,5 W but not more than 1 200 W, — with a stator cross-section of 65 mm or more but not more than 75 mm and a thickness of 15 mm or more but not more than 45 mm, and — with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances(1) 296/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8367 ex 8501 20 00 70 Universal AC/DC motor, rotating: 0 % — 31.12.2027 — with a nominal supply voltage of 230 V, — with a power of more than 37,5 W but not more than 700 W, — with a stator cross-section of 49 mm or more but not more than 59 mm and a thickness of 15 mm or more but not more than 45mm, and — with or without a worm gear, gears or a gearbox, for the production of a torque to a transmission shaft for small domestic appliances(1)

0.5954 ex 8501 31 00 45 DC motors, brushless, with: 0 % — 31.12.2029 — an external diameter of 90 mm or more, but not more than 110 mm, — a rated speed of not more than 3 680 rpm, — an output of 600 W or more but not more than 740 W at 2 300 rpm and at 80 °C, — a supply voltage of 12 V, — a torque of not more than 5,67 Nm, — a rotor position sensor, — an electronic star-point relay, and — for use with an electric power steering control module

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 297/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8395 ex 8501 31 00 47 Motor for automotive electric seat adjustment applications: 0 % — 31.12.2027 — with a shaft output on both motor sides, — consisting of a permanently excited DC motor, — whether brushed or brushless, — whether or not with electronic control unit, — whether or not with Hall Effect Sensor, — with a nominal voltage of 8 V or more but not more than 16 V, — with a rated output mechanical power not exceeding 120 W, and — with a specified temperature range from – 40 °C to 160 °C, for use in the manufacture of automotive components for car seats(1)

0.8609 ex 8501 31 00 48 Brushless DC electric motors: 0 % — 31.12.2028 — with a rated power of 240 W or more, but not more than 260 W, — with a voltage of 36 V or higher, but not higher than 52 V — with a torque of 20 Nm or more, but not more than 140 Nm, — with a housing made of aluminium, aluminium alloy or plastic, — with or without a built-in controller, — with a communication function in the LIN or UART interface, — weighing 1,5 kg or more, but not more than 5,0 kg, — adapted for mounting in a bicycle frame for use in the manufacture of e-bikes(1) 298/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8608 ex 8501 31 00 49 Brushless DC electric motors: 0 % — 31.12.2028 — with a rated power of 240 W or more, but not more than 260 W, — with a voltage of 24 V or higher, but not higher than 52 V, — with a torque of 30 Nm or more, but not more than 62 Nm, — with a LIN, UART or CAN communication interface, — with an internal planetary gearbox with fixed or variable ratio or direct drive, — with a housing made of aluminium or aluminium alloy, — with a weight of 1,5 kg or more, but not more than 6 kg, — adapted for mounting in the front or rear bicycle wheel, for use in the manufacture of e-bikes(1)

0.5577 ex 8501 31 00 50 DC motors, brushless, with: 0 % — 31.12.2027 — an external diameter of 80 mm or more, but not more than 200 mm, — a supply voltage of 4V or more, but not more than 16 V, — an output at 20 °C of 200 W or more, but not more than 750 W, — a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm, — a rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm, — with or without a pulley, — with or without an electronic power steering sensor/controller

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 299/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8847 ex 8501 31 00 52 Electric brushless direct current motor finished with biocompatible materials such as stainless 0 % p/st 31.12.2029 steel according to specification 17-4 PH or type 303, 316L, 400 with:

— a three-phase winding, — an output power not exceeding 280 W, — a length with gearhead of 116,1 mm or more but not more than 117,2 mm, — an external diameter of 13,86 mm or more but no more than 13,92 mm, — a maximum torque of motor with gearhead 246,6 mNm in 25 °C, — a no-load radial speed of motor with gearhead with 9 900 rpm, at 24 V in 25 °C, — a weight of motor with gearhead of 70,5 g or more but not more than 71,5 g, a resistance to peak temperature of 140 °C or more (non-operating), a maximal air leak between shaft and shaft seals of 15 Pa/s at given 2 Bars of pressure, — 14 functional pins for power and control purpose, — a flexible printed circuit with length of 245 mm but no longer than 255 mm with mounted 8 pin male connector for use in the manufacture of medical devices with right-left rotation and oscillation function(1) 300/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8855 ex 8501 31 00 54 Brushless DC electric motor, with: 0 % p/st 31.12.2029 — a rated voltage of 310 V, — a rated power of 350 W or more but not more than 368 W, — an input power of 500 W or more but not more than 550 W, — output power of 350 W or more but not more than 400 W, — an external diameter without bracket connector and pulley of 143,2 mm or more but not more than 143,8 mm, — a rated speed of 16 300 rpm or more but not more than 16 500 rpm, — a weight of 2,33 kg or more but not more than 2,40 kg, — a pulley

0.5978 ex 8501 31 00 55 DC motor with or without commutator, for driving hand-held power tools, lawn mowers or 0 % — 31.12.2029 home appliances, with: ex 8501 32 00 40 — an external diameter of 24,2 mm or more, but not more than 140 mm, — a rated speed of 3 300 rpm or more, but not more than 26 200 rpm, — a rated supply voltage of 3,6 V or more, but not more than 230 V, — an output power of more than 37,5 W, but not more than 2 400 W, — a free load current of not more than 20,1 A, — a maximum efficiency of 50 % or more,

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 301/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8974 *ex 8501 31 00 56 DC motor, brushless, integrated with an Electronic Control Unit (ECU), defined as a Power 0 % p/st 31.12.2030

Pack with: — a safety feature and mechanism designed for prevention of critical hazards like self-steer by single failure, — a CAN-communication interface, — an external sensor interface, — operating temperature range of – 40 °C to 95 °C or broader, — compliance with standard IP6K9K for water and dustproofness, — supply voltage of 9 V or more, but not more than 16 V, — rated power output of 500 W or more, but not higher than 750 W, — rated torque of 3 Nm or more, but not more than 6 Nm, — length of 150 mm or more, but not more than 250 mm, — width of 100 mm or more, but not more than 150 mm, — height of 80 mm or more, but not more than 120 mm 302/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8977 *ex 8501 31 00 57 Brushless DC electric motor with LCD control indicator and/or control unit with buttons: 0 % p/st 31.12.2030 — with an output power of 200 W or more, but not more than 700 W, — with a supply voltage of 30 V or more, but not more than 60 V, — with a torque of 30 Nm or more, but not more than 200 Nm, — with a height of 117 mm or more, but not more than 146 mm, — with a length of 117 mm or more, but not more than 223 mm, — with a width of 135 mm or more, but not more than 190 mm, — with a weight of 2 kg or more but not more than 5 kg, — designed to be mounted in a frame, front or rear bicycle wheel, — equipped with sockets, at least for cable connection with LCD control indicator, for use in the manufacture of electric bicycles(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 303/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4731 ex 8501 31 00 58 Permanently excited DC motor with: 0 % — 31.12.2029 — an external diameter of 27 mm or more but not more than 90 mm, including mounting flange, — a rated speed of not more than 25 000 rpm, — an output of 45 W or more but not more than 400 W, and — a supply voltage of 9 V or more but not more than 50 V, — whether or not a multiple-phase winding, — whether or not with a drive disc, — whether or not with a crankcase, — whether or not with a fan, — whether or not with a cap assembly, — whether or not with a sun gear, — whether or not with a speed and rotational direction encoder, — whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type, — whether or not with a mounting flange for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture(1) 304/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6809 *ex 8501 31 00 63 Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and 0 % — 31.12.2030

permanently excited direct current motor with: ex 8501 32 00 65 — a specified speed of not more than 4 100 rpm, — a minimum output of 400 W, but not more than 1,3 kW (at 12 V), or with a minimum output of 750 W but not more than 1,55 kW (at 36 V), — a flange diameter of 85 mm or more but not more than 200 mm, — a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending, — a housing length of not more than 265 mm, measured from the flange to the outer ending, — a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease), — a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and — surface magnets, — whether or not with electronic power steering controller, — whether or not with pulley, — whether or not with rotor position sensor

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 305/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4855 ex 8501 33 90 30 Electric drive for motor vehicles, with an output of not more than 315 kW: 0 % — 31.12.2026 ex 8501 40 80 50 — with an AC or DC motor with or without transmission, ex 8501 53 50 10 — with or without power electronics

0.8188 ex 8501 40 20 35 Electric AC motor, single-phase, with: 0 % — 31.12.2026 — a rated power of 120 W or more but not more than 150 W, — an input power of 280 W or more but not more than 350 W, — an external diameter without bracket connector and pulley of 145 mm or more but not more than 160 mm, — a rated speed of 2 680 rpm or more but not more than 3 000 rpm, — a weight of 4,2 kg or more but not more than 4,6 kg, — pulleys, a spindle and a tachometer, for use in the manufacture of home appliance products(1)

0.8189 ex 8501 40 20 45 Electric AC motor, single-phase, with: 0 % — 31.12.2026 — a rated power of 275 W or more, but not more than 325 W, — an input power of 600 W or more but not more than 700 W, — an external diameter without bracket and connector of 150 mm or more but not more than 170 mm, — a rated speed of 15 000 rpm or more but not more than 20 000 rpm, — a weight of 4,2 kg or more, — a pulley and a tachometer, for use in the manufacture of home appliance products(1) 306/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8191 ex 8501 40 20 50 Electric AC motor, single-phase, with: 0 % — 31.12.2026 — a rated power of 300 W or more but not more than 370 W, — an input power of 600 W or more but not more than 700 W, — an external diameter without bracket and connector of 150 mm or more but not more than 170 mm, — a rated speed of 15 000 rpm or more but not more than 19 000 rpm, — a weight of 4,8 kg or more, — a pulley, for use in the manufacture of home appliance products(1)

0.8192 ex 8501 40 20 55 Electric AC motor, single-phase, with: 0 % — 31.12.2026 — a rated power of 275 W or more, but not more than 325 W, — an input power of 600 W or more but not more than 700 W, — an external diameter without bracket and connector of 160 mm or more but not more than 180 mm, — a rated speed of 15 000 rpm or more but not more than 19 000 rpm, — a weight of not more than 4,4 kg, — a pulley, for use in the manufacture of home appliance products(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 307/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8193 ex 8501 40 20 60 Electric AC motor, single-phase, with: 0 % — 31.12.2026 — a rated power of 275 W or more but not more than 325 W, — an output power of 550 W or more but not more than 600 W, — an input power of 800 W or more but not more than 1 000 W, — an external diameter of more than 150 mm but not more than 170 mm without the bracket, — a rated speed of more than 16 000 rpm but not more than 18 000 rpm, — a weight of 3,4 kg or more but not more than 3,7 kg, — a pulley, for use in the manufacture of home appliance products(1)

0.8982 *ex 8501 40 20 75 Incomplete, single-phase brushless AC motor consisting of a rotor and a stator: 0 % p/st 31.12.2030 — a rotor on the inside is equipped with a ring of 12 magnets housed in a steel casing, — a stator with an internal diameter of 206,6 mm (± 0,5 mm), external diameter of 265,0 mm (± 0,2 mm) and width of 37,2 mm or more but not more than 47,8 mm, — with a rated power not exceeding 750 W, — with a weight of 5 kg or more, for use in the production of washing machines, washer-dryers equipped with a drum with direct drive(1) 308/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8844 ex 8501 51 00 25 Electric permanent magnet synchronous motor with: 0 % p/st 31.12.2029 — an output power of 550 W, — a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover, — an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm, — terminals located across the radius 32,5 mm and separated by an angle of 21,8o, — a motor housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard), — a back electromotive force constant (Ke) of 0,03306 V-sec/rad or more but no more than 0,03654 V-sec/rad, — a back electromotive force harmonic order - 5th of no more than 0,38 % (of fundamental) and 7th of no more than 0,25 % (of fundamental), — a cogging torque of no more than 13 mNm, — a friction torque in ambient temperature of no more than 22 mNm, — a maximum temperature of motor operation of no more than 200 °C

0.5329 ex 8501 51 00 30 AC synchronous servo motor with resolver and brake for a maximum speed of not more than 0 % — 31.12.2026 6 000 rpm, with: ex 8501 52 20 50 — an output of 340 W or more but not more than 7,4 kW, — a flange of dimensions of not more than 180 mm × 180 mm, and — a length from flange to extreme end of resolver of not more than 271 mm

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 309/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8845 ex 8501 51 00 35 Electric permanent magnet synchronous motor with: 0 % p/st 31.12.2029 — an output power of 600 W, — a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron and dysprosium enclosed in aluminium cover, — an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm, — terminals located across the diameter 59,2 mm and separated by an angle 30,0o, — a housing made of electrogalvanized steel (per JIS G3313 Grade SECE standard) using a deep-drawing stamping process, — a diameter of 88,600 mm or less but no less than 88,546 mm at the motor-system assembly interface, — a back electromotive force constant (Ke) of 0,03277 V-sec/rad or more but no more than 0,03623 V-sec/rad, — a back electromotive force harmonic order - 5th of no more than 0,35 % (of fundamental) and 7th of no more than 0,30 % (of fundamental), — a cogging torque of no more than 12 mNm, — a friction torque in ambient temperature of no more than 23 mNm, — a maximum temperature of motor operation of no more than 200 °C 310/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8190 ex 8501 51 00 40 Electric AC motor, three-phase, with: 0 % — 31.12.2026 — a rated power of 280 W or more but not more than 320 W, — an output power of 480 W or more but not more than 540 W, — an input power of 800 W or more but not more than 900 W, — an external diameter of 150 mm or more but not more than 170 mm, — a rated speed of 15 000 rpm or more but not more than 20 000 rpm, — a weight of 6 kg or more but not more than 6,4 kg, — a pulley and a tachometer, for use in the manufacture of home appliance products(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 311/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8590 ex 8501 51 00 45 Automotive-ready brushless permanently excited magnet synchronous alternating current 0 % p/st 31.12.2028

motor with: — a specified speed of not more than 7 000 rpm, — an output of 400 W or more but not more than 750 W (at 12 V), — a flange diameter of 80 mm or more, but not more than 200 mm, — a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end, — a housing length of not more than 265 mm, measured from the flange to the outer end, — a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with O-ring and protective grease or liquid seal interface), — a stator with single T-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets, — whether or not with electronic power steering controller, — whether or not with pulley or coupling, — whether or not with rotor position sensor 312/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8404 ex 8501 51 00 50 Three phase AC synchronous brushless permanent magnet motor with: 0 % — 31.12.2027 — an output of 500 W or more but not more than 700 W, — an external diameter of 129,7 mm or more but not more than 180,3 mm, — a rated speed of 16 000 rpm or more but not more than 17 000 rpm, — a weight of 2,5 kg or more but not more than 3,1 kg, and — with a pulley, for use in the manufacture of home appliance products(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 313/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8902 ex 8501 52 20 70 Automotive-ready brushless permanently excited magnet synchronous alternating current 0 % p/st 30.06.2030

motor with: — a specified speed of not more than 7 000 rpm, — an output of 750 W or more but not more than 1,8 kW (at 12 V), — a flange diameter of 80 mm or more, but not more than 200 mm, — a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end, — a housing length of not more than 265 mm, measured from the flange to the outer end, — a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with O-ring and protective grease or liquid seal interface), — a stator with single T-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets, — whether or not with electronic power steering controller, — whether or not with pulley or coupling, — whether or not with rotor position sensor 314/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8846 ex 8501 52 20 80 Electric permanent magnet synchronous motor with: 0 % p/st 31.12.2029 — an output power of 850 W, — a rotor containing 8 poles generated by permanent magnets composed mainly with neodymium-iron-boron (per GB/T 13560 standard) enclosed in polyethylene cover, — an outer diameter of motor magnet shaft end with dimension of 10,001 mm or more but no more than 10,007 mm, — terminals located across the radius 26,2 mm and separated by an angle 30,0o, — a housing made of ADC12 or AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302 or EN1706 standard) and anodized coating (per ASTM B580 type E standard), — a back electromotive force constant (Ke) of 0,04009 V-sec/rad or more but no more than 0,04431 V-sec/rad, — a back electromotive force harmonic order - 5th of no more than 0,36 % (of fundamental) and 7th of no more than 0,24 % (of fundamental), — a cogging torque of no more than 20 mNm, — a friction torque in ambient temperature of no more than 26,5 mNm, — a maximum temperature of motor operation of no more than 200 °C

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 315/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8129 *ex 8501 53 50 30 Permanent magnet synchronous traction motor, with: 0 % — 31.12.2030 — a continuous power of 110 kW or more but not more than 180 kW, — a liquid cooled system, — a total length of 500 mm or more but not more than 650 mm, — a total width of 600 mm or more but not more than 700 mm, — a total height of 550 mm or more but not more than 650 mm, — weighing of not more than 350 kg, — 3 suspension points

0.8285 ex 8501 53 50 40 Permanent magnet traction AC motor, with: 0 % — 31.12.2026 — a continuous power of 110 kW or more but not more than 150 kW, — a liquid cooled system, — a total length of 460 mm or more but not more than 590 mm, — a total width of 450 mm or more but not more than 580 mm, — a total height of 490 mm or more but not more than 590 mm, — a weight of not more than 310 kg, — 4 mounting points 316/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8458 ex 8501 53 50 50 Asynchronous traction motor, with: 0 % — 31.12.2027 — a continuous power of 140 kW or more but not more than 180 kW, — a liquid cooled system, — a total length of 580 mm or more but not more than 730 mm, — a total width of 550 mm or more but not more than 670 mm, — a total height of 510 mm or more but not more than 630 mm, — with a weight of not more than 390 kg, — with or without reduction gear, — with or without starter generator, — 2 mounting points, for use in the manufacture of the electric drive of hybrid buses(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 317/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8130 *ex 8501 62 00 40 AC, 3-phase generator, with: 0 % — 31.12.2030 — a continuous power of 147 kVA or more but not more than 222 kVA, — a continuous torque of 650 Nm or more but not more than 900 Nm, — a maximum working speed of 2 700 revolutions per minute (rpm), — a liquid cooled system, — a length of 100 mm or more but not more than 200 mm, — a width of 550 mm or more but not more than 650 mm, — a height of 550 mm or more but not more than 650 mm, — weighing of not more than 150 kg

0.2837 ex 8503 00 91 31 Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) 0 % p/st 31.12.2029 whether or not incorporated in a steel ring or bearing mounted in steel housing ex 8503 00 98 32

0.4599 ex 8503 00 98 33 Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm 0 % p/st 31.12.2026

0.7496 ex 8503 00 98 37 Rotor for electric motor, with the rotor cylindrical body made of agglomerated ferrite or 0 % — 31.12.2029 sintered neodymium or plastoneodymium, with or without metal shaft and with or without

plastic elements: — diameter of the rotor body of 15 mm or more but not more than 37 mm, — length of the rotor body of 12 mm or more but not more than 36 mm 318/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8658 ex 8503 00 98 40 Pressure casted inner housing of a cooling channel system for an electrical motor: 0 % — 31.12.2028 — of EN AC-47100 aluminium, — shot-blasted and machined, — leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, — with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506), — with a tensile strength of 190 N/mm2 or more, — with a height of 160 mm or more, but not more than 330 mm, — with a diameter of 240 mm or more, but not more than 368 mm, — with a weight of 3 kg or more, but not more than 5,84 kg

0.8662 ex 8503 00 98 53 Pressure casted rotor cover of the cooling channel system in the electrical motor: 0 % — 31.12.2028 — of EN AC-47100-F aluminium, — with a sealing cap of stainless steel, — shot-blasted and machined, — leakproof to the degree of 1 ml per minute or less under 2,75 bar pressure, — with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506), — with a tensile strength of 190 N/mm2 or more, — with a height of 42 mm or more, but not more than 64 mm, — with a diameter of 88 mm or more, but not more than 132 mm, — with a weight of 0,3 kg or more, but not more than 0,5 kg

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 319/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6161 ex 8503 00 98 55 Stator for brushless motor, with: 0 % p/st 31.12.2026 — an internal diameter of 206,6 mm (± 0,5), — an external diameter of 265,0 mm (± 0,2), and — a width of 37,2 mm or more but not more than 47,8 mm, of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums

0.8659 ex 8503 00 98 63 Pressure casted outer housing of an electrical motor: 0 % — 31.12.2028 — of EN AC-47100 aluminium, — with or without overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel, — shot-blasted and machined, — with or without a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure, — with a hardness of 70 or more on the Hardness Brinell Wolfram (HBW) scale (2,5/62,5, according to ISO 6506), — with a tensile strength of 190 N/mm2 or more, — with a height of 195 mm or more, but not more than 430 mm, — with a width of 290 mm or more, but not more than 625 mm, — with a length of 270 mm or more, but not more than 535 mm, — with a weight of 5,2 kg or more, but not more than 12,5 kg 320/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8783 ex 8503 00 98 73 Pressure die-cast electric motor stator housing: 0 % — 31.12.2029 — of EN AC-46000 aluminium, — shot-blasted and machined, — with a height of 70 mm or more but not more than 76 mm, — with a width of 155 mm or more but not more than 162 mm, — with a weight of 330 g or more but not more than 360 g

0.7761 ex 8503 00 98 75 Stator body of stacked electrical sheet having: 0 % — 31.12.2029 — an inner diameter of 18 mm or more but not more than 35 mm, — an outer diameter of 35 mm or more but not more than 65 mm, and — a length of 20 mm or more but not more than 65 mm, — whether or not incorporated in a housing

0.7549 ex 8504 31 80 15 Electrical Transformer with 0 % — 31.12.2029 — a capacity of 192 Watts or 216 Watts — dimensions of not more than 27,1 x 26,6 x 18 mm — an operating temperature range of – 40 °C or more, but not more than + 125 °C — three or four inductively coupled copper wire windings and — 9 connection pins at the bottom

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 321/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4450 ex 8504 31 80 30 Switching transformers, having a power handling capacity of not more than 1 kVA for use in 0 % — 31.12.2029 the manufacture of static converters(1)

0.7000 ex 8504 31 80 50 Transformers for use in the manufacture of electronic drivers, control devices and LED light 0 % — 31.12.2026 sources for lighting industry(1)

0.7029 ex 8505 11 10 20 Articles, of an alloy of neodymium, in the shape of a rectangle, triangle, square, or trapezoid, 0 % — 31.12.2026 — whether or not arched, — whether or not with rounded corners or oblique sides, — whether or not colour marked — whether or not coated or passivated with a surface treatment, — whether or not consisting of segments bonded together and electrically insulated from one another

with: — a length of 9 mm or more, but not more than 105 mm, — a width of 5 mm or more, but not more than 105 mm, — a thickness of 2 mm or more, but not more than 55 mm intended to become permanent magnet after magnetisation

0.5584 ex 8505 11 10 23 Bars in the form of arched rectangles, containing alloy containing neodymium, with: 0 % p/st 31.12.2027 — a length of 15 mm or more but not more than 52 mm, — a width of 5 mm or more but not more than 42 mm, — whether or not coated or passivated with a surface treatment, intended to become permanent magnets after magnetisation 322/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5585 ex 8505 11 10 28 Articles containing alloy containing neodymium, in the form of rings, tubes, bushings or 0 % p/st 31.12.2027

collars: — with an external diameter of not more than 45 mm, — with a height of not more than 45 mm, — whether or not coated or passivated with a surface treatment, intended to become permanent magnets after magnetisation

0.3740 ex 8505 11 10 30 Permanent magnets of an alloy of neodymium, either in the shape of a rectangle, whether or 0 % p/st 31.12.2029 not rounded, whether or not coated or passivated with a surface treatment, with:

— a rectangular or a trapezoidal cross-section, — a length of not more than 140 mm, — a width of not more than 90 mm and — a thickness of not more than 55 mm,

or in the shape of an arched rectangle with: — a length of not more than 75 mm, — a width of not more than 40 mm, — a thickness of not more than 7 mm and — a radius of curvature of more than 86 mm but not more than 241 mm, — layers of nickel and copper

or in the shape of a disc with: — a diameter of not more than 90 mm, — whether or not a hole in the centre

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 323/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5948 ex 8505 11 10 35 Article of an alloy of neodymium, in the shape of a disc, with: 0 % — 31.12.2029 — a diameter of not more than 90 mm, — whether or not a hole in the centre, — layers of copper, nickel and/or zinc, intended to become permanent magnets after magnetisation

0.8508 ex 8505 11 10 78 Two permanent magnets made of a praseodymium-neodymium alloy, in a rectangular steel 0 % — 31.12.2027

holder with an outer casing of rubber with outer dimensions: — a length of 200 mm or more but not more than 205 mm, — a width of 58 mm or more but not more than 62 mm, — a height of 25 mm or more but not more than 30 mm, with a stud mounted in the middle

0.5937 ex 8505 19 90 30 Articles of agglomerated ferrite in the shape of a disc, whether or not coated or 0 % — 31.12.2029 passivated with a surface treatment, with: — a diameter of not more than 120 mm, — a hole in the centre, intended to become permanent magnets after magnetisation with a remanence between 245 mT and 470 mT 324/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7299 ex 8505 19 90 45 Article of agglomerated ferrite in the shape of a rectangle, whether or not with oblique sides, 0 % p/st 31.12.2027

with: — a length of 26,85 mm or more but not more than 32,15 mm, — a width of 7,6 mm or more but not more than 9,55 mm, — a thickness of 5,3 mm or more but not more than 5,8 mm, and — a weight of 6,1 g or more but not more than 8,3 g, intended to become a permanent magnet after magnetisation

0.7511 ex 8505 19 90 60 Articles of agglomerated ferrite in the shape of arched rectangles, 0 % — 31.12.2029 — whether or not coated or passivated with a surface treatment, — whether or not with rounded corners,

with: — a length of 9 mm or more but not more than 101 mm, — a width of 9 mm or more but not more than 101 mm, — a thickness of 1,85 mm or more but not more than 15,15 mm, intended to become permanent magnets after magnetisation

0.4029 ex 8505 20 00 30 Electromagnetic clutch, for use in the manufacture of compressors of air conditioning 0 % p/st 31.12.2029 machines of motor vehicles(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 325/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8627 ex 8505 20 00 40 Electromagnetic clutch: 0 % — 31.12.2028 — transmitting torque from the motor shaft to the cutting device pulley, — containing field coil, rotor, hub and armature, — with an operating voltage of 12 V — a current of 3,93 A current or more but not more than 6,86 A, — a resistance of 1,84 ohm or more but not more than 3,05 ohm (operating at 20 °C), — a static torque of 108 Nm or more but not more than 305 Nm for use in the manufacture of rider type self-propelled mowers(1)

0.8095 ex 8505 90 90 20 Electromagnetic clutch coil in a cylindrical metal housing: 0 % p/st 31.12.2027 — the metal housing is made of hot-rolled steel complying with standard JIS G 3131 – SPHE, — the coil is made of copper wire, — with a weight of 0,4 kg or more but not more than 0,85 kg, — with a width of 20 mm or more but not more than 45 mm, — with a plate reinforced to the coil (coil backplate) with an internal diameter of 44 mm or more but not more than 46 mm, — with an external diameter of 87 mm or more but not more than 110 mm, — without plunger, — with one connector

0.2490 ex 8506 50 90 10 Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm 0 % — 31.12.2029 × 45 mm and a voltage of not more than 2,8 V 326/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2488 ex 8506 50 90 30 Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more 0 % — 31.12.2029 than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah

0.6685 *ex 8507 60 00 15 Cylindrical lithium-ion-accumulators or modules with: 1,3 % — 31.12.2026 — a nominal capacity of 8,8 Ah or more, but not more than 18 Ah, — a nominal voltage of 36 V or more, but not more than 48 V, — a power of 300 W or more, but not more than 648 W, for use in the manufacture of electric bicycles(1)

0.7663 *ex 8507 60 00 18 Lithium-ion polymer accumulator pack equipped with a battery management system and 1,3 % — 31.12.2026 can-bus interface with: — 6 modules with 90 cells or more but not more than 192 cells, — a nominal voltage of 280 V or more but not more than 400 V, — a nominal capacity of 9,7 Ah or more but not more than 120 Ah, — a charging voltage of 110 V or more but not more than 495 V, and

in a metal casing with: — a length of not more than 1 723 mm, — a width of not more than 1 162,23 mm, — a height of not more than 395 mm, for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 327/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8593 *ex 8507 60 00 24 Rechargeable lithium-ion battery, based on lithium-iron-phosphate technology, with: 1,3 % — 31.12.2026 — a fuse, — a cell-to-pack design, — a length of 985 mm or more but not more than 1 015 mm, — a width of 1 050 mm or more but not more than 1 070 mm — a height of 145 mm or more but not more than 160 mm, — a weight of 220 kg or more but not more than 250 kg, — a capacity of 200 Ah or more, — a specific energy density of 130 Wh/kg or more, for use in the manufacture of vehicles of subheading 8702 40(1)

0.8660 *ex 8507 60 00 26 Modules for the assembly of electric accumulators using lithium ferrophosphate technology 1,3 % — 31.12.2026

(LFP) with: — a length of 670 mm or more, but not more than 882 mm, — a width of 390 mm or more, but not more than 655 mm, — a height of 110 mm or more, but not more than 137 mm, — a weight of 60 kg or more, but not more than 165 kg, and — a power of 11 300 Wh or more, but not more than 29 360 Wh 328/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8645 *ex 8507 60 00 28 Lithium-ion rechargeable battery cell with: 1,3 % — 31.12.2026 — a length of 190 mm or more but not more than 380 mm, — a width of 90 mm or more but not more than 150 mm, — a height of 4 mm or more but not more than 35 mm, — a weight of 0,1 kg or more but not more than 2,5 kg, — a nominal voltage of 3,0 VDC or more but not more than 5,0 VDC, — a nominal capacity of not more than 150 Ah, for use in the manufacture of rechargeable hybrid and electric vehicle batteries(1)

0.8368 *ex 8507 60 00 29 Lithium-ion rechargeable battery pack in a specific housing, suitable for use in digital still 1,3 % — 31.12.2026 cameras, having: — a length of 50 mm or more, but not more than 120 mm, — a width of 35 mm or more, but not more than 80 mm, — a height of 15 mm or more, but not more than 45 mm, — a weight of 0,040 kg or more but not more than 0,085 kg; and — a capacity of not more than 2 200 mAh

0.2907 *ex 8507 60 00 30 Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and 1,3 % — 31.12.2026 a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 329/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.5548 *ex 8507 60 00 31 Modules for the assembly of lithium-ion battery packs, using a technology other than lithium 1,3 % — 31.12.2026 ferrophosphate (LFP) with: — a length of 298 mm or more, but not more than 500 mm, — a width of 33,5 mm or more, but not more than 209 mm, — a height of 75 mm or more, but not more than 228 mm, — a weight of 3,6 kg or more, but not more than 17 kg, — a power of 458 Wh or more, but not more than 3 510 Wh, and — a voltage of less than 45 V or more than 70 V

0.6703 *ex 8507 60 00 33 Lithium-ion battery module or accumulator, with: 1,3 % — 31.12.2026 — a length of 150 mm or more, but not more than 1 310 mm, — a width of 100 mm or more, but not more than 1 000 mm, — a height of 200 mm or more, but not more than 1 500 mm, — a weight of 50 kg or more, but not more than 200 kg, — cells of a nominal capacity of 58 Ah or more but not more than 500 Ah, — a nominal output voltage of 230 V AC or 45 V or more but not more than 980 V DC 330/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8654 *ex 8507 60 00 36 Lithium-ion accumulator, with 1,3 % — 31.12.2026 — multiple connected lithium-ion accumulator cells, — charging and monitoring electronics, — a power of 74 Wh or more, but not more than 75 Wh, — in a plastic housing with electrical connection contacts and LCD display, for use in the manufacture of cordless vacuum cleaners or rechargeable power sources therefor(1)

0.8115 *ex 8507 60 00 48 Integrated battery system in a metal or plastic case with or without holders, consisting of: 1,3 % — 31.12.2026 — a lithium-ion battery with a voltage of 36 V or more but not more than 50,4 V and a nominal energy between 0,3 kWh and 0,9 kWh, — a Battery Management System, — a power relay, — a cooling system, — one to four connectors, for use in the manufacture of Mild-hybrid (mHEV) motor vehicles(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 331/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7641 *ex 8507 60 00 58 Prismatic lithium-ion electric accumulator with: 1,3 % — 31.12.2026 — a width of 120,0 mm or more but not more than 305,0 mm, — a thickness of 12,0 mm or more but not more than 67,0 mm, — a height of 72,0 mm or more but not more than 126,0 mm, — a nominal voltage of 3,6 V or more but not more than 3,75 V, and — a nominal capacity of 6,9 Ah or more not more than 265 Ah, for use in the manufacture of rechargeable electric vehicle batteries(1)

0.6753 *ex 8507 60 00 77 Lithium-ion rechargeable batteries, with: 1,3 % — 31.12.2026 — a length of 700 mm or more, but not more than 2 820 mm, — a width of 935 mm or more, but not more than 1 660 mm, — a height of 85 mm or more, but not more than 700 mm, — a weight of 250 kg or more, but not more than 700 kg, — a power of not more than 175 kWh, — a nominal voltage of 320 V or more, but not more than 430 V for use in the manufacture of vehicles of subheadings 8701 to 8705(1) 332/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8275 *ex 8507 60 00 83 Modules for the assembly of lithium-ion electric accumulators with: 1,3 % — 31.12.2026 — a length of 570 mm or more, but not more than 610 mm, — a width of 210 mm or more, but not more than 240 mm, — a height of 100 mm or more, but not more than 125 mm, — a weight of 28 kg or more, but not more than 35 kg, and — a capacity of not more than 2 500 Ah and a nominal energy of less than 8,4 kW, for use in the manufacture of vehicles of subheadings 8703 60, 8703 70, 8703 80 and 8704 60(1)

0.8991 *ex 8507 90 31 20 Separator for the manufacture of lithium-ion batteries, in rolls, made of transparent, 1,3 % — 31.12.2030 microporous, acrylic acid grafted polyethylene film, with: — a width of 98 mm or more but not more than 170 mm, — a thickness of 15 μm or more but not more than 36 μm

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 333/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8992 *ex 8507 90 31 30 Separator for the manufacture of lithium-ion batteries, in rolls, made of microporous 1,3 % — 31.12.2030 monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:

— zero transversal production direction (TD) shrinkage, — a total thickness of 8 μm or more, but not more than 40 μm, — a width of 15 mm or more, but not more than 900 mm, — a length of more than 200 m, but not more than 8 000 m, — an average pore size between 0,02 μm and 0,1 μm, — whether or not coated with surfactant, — whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm, — whether or not coated on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm

0.7280 *ex 8507 90 31 40 Separator for the manufacture of lithium-ion batteries made of a multi-porous multilayer 1,3 % m2 31.12.2027

separator foil with: — one microporous polyethylene layer between two microporous polypropylene layers and whether or not coated with aluminium oxide on both sides, — a width of 65 mm or more but not more than 170 mm, — a total thickness of 10 μm or more but not more than 30 μm, — a porosity of 25 % (vol.) or more but not more than 65 % (vol.) 334/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8419 *ex 8507 90 80 55 Top cap or housing made of aluminium or ferrous alloy or stainless steel: 1,3 % — 31.12.2026 — whether or not including parts made of aluminium and aluminium alloy, — with or without sealing elements or other elements made of polymer material, — with or without a “current interrupt device” and an “evacuation valve” — with or without plastic sockets — with an outer diameter of 17 mm or more, but not more than 18 mm,

or rectangular with: — length not greater than 450 mm, — width not greater than 200 mm, and — hight not greater than 150 mm, for use in the manufacture of lithium-ion batteries(1)

0.6304 ex 8511 30 00 30 Igniter integrated coil assembly with: 0 % p/st 31.12.2029 — an igniter, — a coil on plug assembly with an integrated mounting bracket, — a housing, — a length of 90 mm or more but not more than 200 mm (± 5 mm), — an operating temperature of – 40 °C or more but not more than 130 °C, — a voltage of 10,5 V or more, but not more than 16 V

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 335/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7024 ex 8511 30 00 55 Ignition coil: 0 % — 31.12.2026 — with a length of 50 mm or more, but not more than 200 mm, — with an operating temperature of – 40 °C or more, but not more than 140 °C, and — with a voltage of 9 V or more, but not more than 16 V, — with or without connection cable, for use in the manufacture of engines of motor vehicles(1)

0.8628 ex 8511 80 00 30 Ignition module: 0 % — 31.12.2028 — made with plastics and non-ferrous metals, — with the electric components cast in epoxy resin, — to generate the ignition energy and to electronically control the ignition timing, — to connect spark plug and circuit breaker, for use in the manufacture of two-stroke engines(1)

0.8633 ex 8512 20 00 25 An electrical component with an integrated LED, in an ABS housing, with: 0 % — 31.12.2028 — a voltage of 11 V or more, but not more than 15 V, — a circular shape, — 2 terminals, — an outer diameter of the housing of 36 mm or more, but not more than 42,5 mm, — a diode voltage of 42 V or more, but not more than 48 V, and — a current of 55 mA or more, but not more than 65 mA 336/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8961 *ex 8512 20 00 35 Sub-assembly reflectors and components for car rear lights: 0 % — 31.12.2030 — containing two or three PCBA with a connection socket and LED, — with central control module (CCE) connected through wired harness, — with a main reflector, a sub-reflector and inner lens scattering the light made of plastic, — with depth of 119 mm or more, but not more than 146 mm, — with width of 142 mm or more, but not more than 490 mm, — with a height of 93 mm or more, but not more than 100 mm, — a weight of 414 g or more, but not more than 578 g, — with lightguide

0.6562 ex 8512 20 00 60 Information screen displaying: 0 % p/st 31.12.2029 — at least time, date and status of safety features in a vehicle, or — safety information on driving in the lane, blind spot, distance from the vehicle in front, current speed, speed limit, with an operating voltage of 12 V or more but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 87

0.8409 ex 8512 20 00 70 Electrical component with light guide integrated with LED, for motor vehicles with: 0 % — 31.12.2027 — two parallel ribs in the front area with a distance between them of 1,4 mm or more but not more than 1,8 mm, — four holes with the dimension of 7,3 mm or more but not more than 7,9 mm in the short direction of the guide, and — a 3 pin connector, for use in the manufacture of automotive components(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 337/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8410 ex 8512 20 00 80 Grab handle light with integrated LED, for motor vehicles: 0 % — 31.12.2027 — a distance between integrated spring clip and surface of 0,85 mm or more but not more than 1,85 mm, — a length of the housing to two front vertical ribs of 26,45 mm or more but not more than 26,75 mm, and — four horizontal ribs where the distance on the lower area over the base radia between the two is 18,5 mm or more but not more than 18,7 mm, for use in the manufacture of automotive components(1)

0.6863 ex 8512 30 90 20 Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic 0 % p/st 31.12.2029 principle, containing: — a printed circuit board, — a connector, — whether or not a metal holder, for use in the manufacture of goods of chapter 87(1)

0.5983 ex 8512 40 00 10 Car door mirror heating foil: 0 % — 31.12.2029 ex 8516 80 20 20 — with two electrical contacts, — with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass), — with a protective paper film on both sides 338/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8391 ex 8516 10 80 10 Tubular Heating Element with mounting flange for washing machines, with: 0 % p/st 31.12.2027 — a nominal output power of 1 700 W at 230 V AC supply voltage, — a weight of 230 g or more but not more than 250 g, — a thickness of the external flange of 2 mm or more, — isolation bushes of steatite or ceramic, and — no flat zones in the design, for use in the manufacture of home appliance products and their components(1)

0.5845 ex 8516 90 00 70 Inner pot: 0 % p/st 31.12.2027 — containing side and central openings, — of annealed aluminium, — with a ceramic coating, heat resistant to more than 200 °C for use in the manufacture of an electric fryer(1)

0.6316 ex 8528 59 00 20 Liquid crystal display colour video monitor assembly mounted on a frame, 0 % — 31.12.2029 — excluding those combined with other apparatus, — comprising touch screen facilities, a printed circuit board with drive circuitry and power supply, used for permanent incorporation or permanent mounting into entertainment systems for vehicles(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 339/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7048 ex 8536 41 10 20 Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, 0 % — 31.12.2026 a galvanically isolated input circuit with a photovoltaic generator and a power MOSFET output switch in a casing with connections for a voltage of 60 volts or less and a current of 2 amps or less

0.6180 ex 8536 41 90 40 Power relay with: 0 % p/st 31.12.2029 — electromechanical and/or electromagnetical switching function, — a load current of 3 A or more but not more than 16 A, — a coil voltage of 5 V or more but not more than 24 V, and — a distance between the connector pins of the load circuit not more than 15,6 mm

0.8735 *ex 8536 41 90 60 Power relay with the function of safely connecting or disconnecting the charging and/or 1,1 % — 31.12.2026 power circuit of 48 V batteries in a plastic housing, containing: — current sensor 50 A/400 V, — high voltage MILD fuse 70 V/300 A, — whether or not cable with connector, for use in the production of rechargeable batteries for hybrid and electric vehicles(1) 340/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7052 ex 8536 49 00 40 Photoelectric (so called photovoltaic) relay consisting of two GaAlAs light-emitting diodes, 0 % — 31.12.2026 two galvanically isolated input circuits with photovoltaic generator(s) and four power MOSFET output switches in a casing with connections for a voltage of more than 60 volts

0.7796 ex 8536 49 00 60 Relay in the shape of a cube with: 0 % — 31.12.2029 — a coil operating voltage of 12 VDC (Voltage Direct Current) or more, but not more than 24 VDC (Voltage Direct Current), — a contact current carrying capacity of 5A or more, but not more than 15 A, — a contact voltage of 80 VAC (Voltage Alternating Current) or more, but not more than 270 VAC (Voltage Alternating Current), — outer dimensions of 19 mm (± 0,4 mm) x 15,2 mm (± 0,4 mm) x 15,5 mm (± 0,4 mm), for use in the production of control board of household appliances(1)

0.4614 ex 8536 69 90 82 Modular socket or plug for local area networks, whether or not combined with other sockets, 0 % p/st 31.12.2029

integrating at least: — a pulse transformer, including a wide-band ferrite core, — a common mode coil, — a resistor, — a capacitor, for use in the manufacture of products falling within headings 8521 or 8528(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 341/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4616 ex 8536 69 90 83 AC socket with a noise filter, composed of: 0 % p/st 31.12.2029 — AC socket (for power cord connection) of 230 V, — integrated noise filter composed of capacitors and inductors, — cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit, whether or not equipped with a metal support, which joins the AC socket to the PDP TV set

0.5318 ex 8536 69 90 85 Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in the 0 % p/st 31.12.2026 manufacture of products falling within headings 8521 or 8528(1)

0.5316 ex 8536 69 90 86 High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal 0 % p/st 31.12.2026 housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 8528(1)

0.5181 ex 8536 70 00 10 Optical socket, plug or connector, for use in the manufacture of goods falling within headings 0 % p/st 31.12.2026 8521 or 8528(1) 342/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8405 ex 8537 10 91 25 A control unit being a printed circuit board with at least: 0 % — 31.12.2027 — a microprocessor, — a programmable memory, — a single connector, — a PPE housing, — a supply of voltage of 220 V or more but not more than 240 V, — a length of 200 mm or more but not more than 210 mm, — a width of 70 mm or more but not more than 100 mm, and — a height of 20 mm or more but not more than 30 mm, for use in the manufacture of dishwashers(1)

0.8392 ex 8537 10 91 35 A control unit being a printed circuit board with at least: 0 % — 31.12.2027 — a microprocessor, — a programmable memory, — two or more connectors, but not more than twelve, — with or without LCD display, — with or without WiFi module, and — with or without an integrated speaker, for use in the manufacture of built-in ovens(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 343/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8460 ex 8537 10 91 43 Electronic suspension control unit with: 0 % — 31.12.2027 — a printed circuit board in plastic housing, — LIN and CAN buses, — a programmable memory, — a signal processor, — an operating direct current voltage of 9 V or more but not more than 16 V, — at least one connector, — whether or not with metal mounting bracket, for use in the manufacture of goods of Chapter 87(1)

0.8085 *ex 8537 10 91 45 Main hybrid system controller, diagnosing and controlling the elements of the hybrid 0 % — 31.12.2026 propulsion system, with: — a programmable memory, — a microprocessor, — at least one composite connector, — a voltage of 24 V, — with a length of 350 mm or more but not more than 400 mm, — with a width of 200 mm or more but not more than 250 mm, — with a height of 80 mm or more but not more than 120 mm, — in a metal housing 344/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8985 *ex 8537 10 91 48 Control unit for the automatic transmission oil pump for efficient cooling and oil pressure 0 % — 31.12.2030 regulation in the car’s drivetrain: — liquid-cooled, — with an operating voltage of 9 V DC or more, but not more than 16 V, — with a height of 165 mm or more, but not more than 190 mm, — with a width of 40 mm or more, but not more than 60 mm, — with a length of 170 mm or more, but not more than 195 mm, — in a casing, — with one or more connectors, and for use in the manufacture of hybrid motor vehicles(1)

0.7627 ex 8537 10 91 57 Programmable memory control board with: 0 % — 31.12.2029 — 4 or more stepper motor drivers, — 4 or more outputs with MOSFET transistors, — a main processor, — 3 or more inputs for temperature sensors, — for a voltage of 10 V or more but not more than 30 V, for use in the manufacture of 3D printers(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 345/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6163 ex 8537 10 91 60 Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at 0 % p/st 31.12.2029

least: ex 8537 10 98 45 — an AC power input of 208 V or more but not more than 400 V, — a logic power input of 24 V DC, — an automatic circuit breaker, — a main power switch, — internal or external electrical connectors and cables, — in a housing with dimension of 281 mm x 180 mm x 75 mm or more, but not more than 630 mm x 420 mm x 230 mm, of a kind used for manufacturing recycling or sorting machines

0.7251 ex 8537 10 91 70 Programmable motor memory controller for a voltage not exceeding 1 000 V, comprising at 0 % p/st 31.12.2027

least: — a printed circuit with active and passive components, — an aluminium housing, and — multiple connectors

0.8841 ex 8537 10 91 75 Printed circuit board equipped with a microcontroller for operating and/or control purposes 0 % — 31.12.2029 — with or without operating components, signal components and display, — for operating voltages of 5V DC or more but not more than 12V DC or 220V AC or more but not more than 400V AC, for use in the manufacture of household appliances of subheadings 7321 11, 8414 60, 8418 10, 8418 21, 8418 29, 8418 40, 8422 11, 8450 11, 8450 12, 8450 19, 8450 20, 8451 21, 8451 29, 8516 60(1) 346/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6140 ex 8537 10 98 30 Motor bridge ICs without programmable memory consisting of: 0 % p/st 31.12.2029 — one or more integrated circuits, not interconnected, on separate lead frames, — also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars — mounted in a plastic housing

0.7194 ex 8537 10 98 33 Lever for control module under the steering wheel: 0 % p/st 31.12.2026 — with several single or multi-positional electrical switches (push-button, rotary or other), — equipped with printed circuit boards and/or electrical cables, — for a voltage of 9 V or more but not more than 16 V, of a kind used in the manufacture of motor vehicles of Chapter 87

0.8401 ex 8537 10 98 38 Control panel with switches for mirror, windows and other functions in vehicles, with: 0 % — 31.12.2027 — a total length of 144 mm or more but not more than 150 mm, — a distance between intended screwing interface center points of 31 mm or more but not more than 31,50 mm, and — electric components inside the panel with integrated LEDs, for use in the manufacture of automotive components(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 347/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8408 ex 8537 10 98 43 Switch for motor vehicle seat regulation with a memory function, with: 0 % — 31.12.2027 — three single switches, — a five-pin connector, — for a voltage of 9 VDC or more but not more than 16 VDC, and — electric components inside the panel with integrated LED, for use in the manufacture of automotive components(1)

0.8400 ex 8537 10 98 48 Memory switch control panel for seat and lock switch for vehicles with: 0 % — 31.12.2027 — a width of 70,2 mm or more but not more than 70,5 mm, — parallel ribs with a distance between them of 2,6 mm or more but not more than 2,8 mm on the rear side, — a 5 pin connector, and — electric components inside the panel with integrated LED, for use in the manufacture of automotive components(1)

0.6507 ex 8537 10 98 50 Electronic control unit BCM (Body Control Module) or IBM (Integrated Body Control Module) 0 % p/st 31.12.2029

or similar: — comprising at least a plastic box with printed circuit board, with operating direct voltage of 9 V or more, but not more than 16 V, — whether or not with metal holder, — able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder, of a kind used in the manufacture of goods of Chapter 87 348/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8407 ex 8537 10 98 53 A control unit being a printed circuit board with at least: 0 % — 31.12.2027 — a microprocessor, — two or more connectors but not more than four, — modified resins, — a length of 180 mm or more but not more than 250 mm, — a width of 130 mm or more but not more than 200 mm, and — a height of 40 mm or more but not more than 60 mm, for use in the manufacture of washing machines(1)

0.8393 ex 8537 10 98 57 A control unit being a printed circuit board with at least: 0 % — 31.12.2027 — a microprocessor, — eight connectors or more but not more than eleven, — a supply voltage of 215 V or more but not more than 245 V, — a housing of PA6-MR30, — with or without a transformer, — with or without a high power relay, — with or without insulated-gate bipolar transistor, — a length of 280 mm or more but not more than 345 mm, — a width of 400 mm or more but not more than 470 mm, — a height of 28 mm or more but not more than 45 mm, for use in the manufacture of induction stoves(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 349/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8406 ex 8537 10 98 63 A control unit being a printed circuit board with at least: 0 % — 31.12.2027 — a microprocessor, — two connectors, — a supply voltage of 215 V or more but not more than 245 V, — no housing, — a length of 100 mm or more but not more than 120 mm, — a width of 40 mm or more but not more than 50 mm, and — a height of 20 mm or more but not more than 30 mm, for use in the manufacture of refrigerators(1)

0.3663 ex 8537 10 98 93 Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted 0 % p/st 31.12.2027 temperature control systems(1)

0.6866 *ex 8538 90 91 20 Interior antenna for a car door locking system, comprising: 0 % p/st 31.12.2030 ex 8538 90 99 50 — an antenna module in a plastic housing, — whether or not a connection cable with a plug, — whether or not a connector, — at least one mounting bracket, — whether or not PCB including integrated circuits, diodes and transistors, for use in the manufacture of goods of Chapter 87(1) 350/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7195 ex 8538 90 99 60 Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure 0 % p/st 31.12.2026 switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 87

0.2580 ex 8540 20 80 91 Photomultiplier 0 % — 31.12.2026

0.3445 ex 8540 89 00 91 Displays in the form of a tube consisting of a glass housing mounted on a board the 0 % — 31.12.2029 dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons

0.7409 ex 8540 91 00 20 Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) 0 % — 31.12.2027 or cerium hexaboride (CAS RN 12008-02-5), with electric connectors — with or without a metal housing, — with or without a graphite carbon shield mounted in a mini-Vogel type system, — with or without separate pyrolytic carbon blocks used as heating elements, and — a cathode temperature of less than 1 800 K at a filament current of 1,26 A

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 351/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7130 ex 8543 70 90 15 Laminated electrochromic film consisting of: 0 % — 31.12.2026 — two outer layers of polyester, — a middle layer of acrylic polymer and silicone, and — two electric connection terminals

0.8333 ex 8543 70 90 27 Electronic control unit of the 360-degree vehicle situation display system with: 0 % — 31.12.2027 — an operating DC voltage of 9 V or more but not more than 16 V, — a videoprocessor, — a signal processor, — one or more connectors, and — whether or not with a metal mounting bracket, for use in the manufacture of goods of Chapter 87(1)

0.2826 ex 8543 70 90 30 Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in 0 % p/st 31.12.2029 a housing

0.7055 ex 8543 70 90 33 High-frequency amplifier comprising one or more integrated circuits and one or more discrete 0 % — 31.12.2026 capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing 352/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2590 ex 8543 70 90 45 Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 0 % p/st 31.12.2029 67 MHz, contained in a housing

0.3131 ex 8543 70 90 55 Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not 0 % p/st 31.12.2029 equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing

0.2816 ex 8543 70 90 85 Voltage controlled oscillator (VCO), other than temperature compensated oscillators, 0 % p/st 31.12.2029 consisting of active and passive elements mounted on a printed circuit, contained in a housing

0.6709 ex 8544 20 00 30 Antenna connecting cable for the transmission of radio (AM/FM) signal and whether or not 0 % — 31.12.2026 GPS signal, containing: — a coaxial cable, — two or more connectors, and — 3 or more plastic clips for attachment to the dashboard of a kind used in the manufacture of goods of Chapter 87

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 353/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8849 ex 8544 30 00 20 Insulated electrical multicore cable for the EPS-system (Electrical Power Steering) of a motor 0 % — 31.12.2029

vehicle: — with a length of 170 mm or more but not more than 301 mm, — with an external diameter of 4,5 mm or more but not more than 7 mm, — with an operating temperature of – 40 °C or more but not more than 125 °C, — with Cross-Linked Polyethylene (XLPE) or Thermoplastic Polyester Elastomer (TPE-E) wire insulation material, — with an operating voltage of 5 V, — fitted with connectors at both ends, — whether or not gold-plated or tin-plated

0.6377 ex 8544 30 00 40 Wire harness or cable for steering system: 0 % p/st 31.12.2029 ex 8544 42 90 40 — for an operating voltage of 12 V, — with connectors on both sides, — whether or not with anchor clamps of plastic for mounting on a motor vehicle steering box

0.6710 *ex 8544 30 00 60 Four-core connecting cable containing two female connectors for the transmission of digital 0 % — 31.12.2030 signals from navigation and/or audio systems to a USB connector and/or LCD monitor, for use ex 8544 42 90 50 in the manufacture of goods of Chapter 87(1) 354/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8331 ex 8544 30 00 65 Six core cable connecting the oil pressure sensor and the differential controller of vehicles: 0 % — 31.12.2027 — with PVC-coating, — with three multiple connectors, and — with or without plastic clip, for use in the manufacture of goods of Chapter 87(1)

0.8647 ex 8544 30 00 75 Wiring harness to connect the integrated battery system with the car's control systems, 0 % — 31.12.2028

containing: — an input waterproof connector, — four or more output connectors, — two or more plastic clips for attachment for use in the production of rechargeable batteries for hybrid and electric vehicles(1)

0.6867 *ex 8544 30 00 85 Extension two-core cable with two connectors, containing at least: 0 % p/st 31.12.2026 — a rubber grommet, — a metal attachment bracket, of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 355/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.4980 ex 8544 42 90 10 Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with: 0 % p/st 31.12.2029 — a voltage of 1,25 V (± 0,25 V) — connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm, — outer screening shielding, used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits

0.4464 ex 8544 42 90 20 PET or PVC insulated flexible cable with or without connector with: 0 % — 31.12.2028 ex 8544 49 93 20 — voltage of not more than 250 V, ex 8544 49 95 10 — a current of not more than 1 A, — a heat resistance of not more than 105 °C, — individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm), — a distance between conductors of not more than 0,5 mm and — a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm 356/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8572 ex 8544 42 90 45 Specially designed connector for solar power system: 0 % — 31.12.2028 ex 8544 60 10 10 — as 1-part system with 1 plastic housing with 1 or more but not more than 4 diodes and 2 insulated copper cables with connectors or — as 3-part system with one plastic housing with 1 or more but not more than 4 diodes and 2 plastic housings with insulated copper cables with connectors, — with a current for the diodes of 3 A or more but not more of 50 A, — with a cable length of not more than 1 500 mm, — with a maximum rated voltage of 1 500 V

0.8859 ex 8544 42 90 55 Wire harness for the transmission of signals and/or electrical power, 0 % — 31.12.2029 — with a 26-PIN or 28-PIN wire to board connectors in crimping technology, — bound by rubber or vinyl or electrical tape or conduit or a weave of extruded string or a combination thereof, for connection of power supply with main printed (circuit) board assembly (PBA) and electrical components of refrigerator or washing machine(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 357/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6853 *ex 8544 42 90 70 Electric conductors: 0 % p/st 31.12.2030 — of a voltage of not more than 80 V, — with a length of not more than 120 cm, — fitted with connectors, for use in the manufacture of hearing aids, accessory kits and speech processors(1)

0.2424 ex 8544 49 93 10 Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements 0 % p/st 31.12.2029

0.6861 *ex 8544 49 93 30 Electric conductors: 0 % m 31.12.2030 — of a voltage of not more than 80 V, — of a platinum-iridium-alloy, — coated with poly(tetrafluoroethylene), — without connectors, for use in the manufacture of hearing aids, implants and speech processors(1)

0.3144 ex 8548 00 90 41 Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but 0 % p/st 31.12.2029 not more than 40 MHz and a capacitor, contained in a housing

0.3193 ex 8548 00 90 43 Contact image sensor 0 % p/st 31.12.2029 358/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3763 ex 8548 00 90 48 Optical unit, containing at least 0 % p/st 31.12.2026 — a laser diode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm — an optical lens — a “Recording Photodetector Integrated Circuit” (PDIC) — a focussing and tracking actuator

0.8972 *ex 8549 13 20 10 Spent electric accumulators of lithium-ion or nickel metal hydride 0 % — 31.12.2030

0.7165 ex 8708 10 10 10 Plastic cover for filling the space between the fog lights and the bumper whether or not with 0 % p/st 31.12.2026 a chrome strip for use in the manufacture of goods of Chapter 87(1) ex 8708 10 90 10

0.6590 ex 8708 30 10 40 Body of disc type brake in BIR (“Ball in Ramp”) or EPB (“Electronic Parking Brake”) or with 0 % p/st 31.12.2029 hydraulic function only, containing functional and mounting openings and guide grooves, of ex 8708 30 91 30 a kind used in the manufacture of goods of Chapter 87

0.6707 *ex 8708 30 10 70 Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 87 0 % p/st 31.12.2030 ex 8708 30 91 40

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 359/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6869 *ex 8708 40 20 20 Automatic hydrodynamic gearbox 0 % p/st 31.12.2030 ex 8708 40 50 10 — with a hydraulic torque converter, — without transfer box and cardan shaft, — whether or not with front differential, for use in the manufacture of motor vehicles of Chapter 87(1)

0.8820 ex 8708 40 20 25 Transmission assembly consisting of: 0 % — 31.12.2029 — double pinion type planetary gear shifting mechanism, — sport sequential shiftmatic system with a speed of 7 or more but not more than 10, — a width of 280 mm or more but no more than 470 mm, — a height of 350 mm or more but no more than 595 mm, — a length of 410 mm or more but no more than 690 mm, — a weight of 70 kg or more but no more than 110 kg, for use in the manufacture of motor vehicles of subheading 8703 22 and 8703 23(1) 360/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7856 *ex 8708 40 20 70 Manual gearbox in cast aluminium housing for transverse installation with: 0 % — 31.12.2029 ex 8708 40 50 60 — maximum dimensions of 550 x 500 x 600 mm — five or six gears, — a differential gear, — an engine torque of 400 Nm or less, for use in the manufacture of motor vehicles of heading 8703(1)

0.8279 *ex 8708 40 20 80 Transmission gearbox without torque converter, with: 0 % p/st 31.12.2026 — dual clutch, — 7 or more forward gears, — 1 reverse gear, — a maximum torque of 450 Nm, — whether or not with electric motor integrated, — a height of 350 mm or more but not more than 600 mm, — a width 350 mm or more but not more than 600 mm, and — a weight of 70 kg or more but not more than 110 kg, for use in the manufacture of motor vehicles of heading 8703(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 361/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8819 *ex 8708 40 50 25 Transmission assembly housing 3 other shafts inside it and offering a rotating switch for shift 0 % — 31.12.2029 position, consisting of: — cast aluminium body, — differential gear, — 2 electrical motors and gears, — a width of 280 mm or more but no more than 470 mm, — a height of 350 mm or more but no more than 595 mm, — a length of 410 mm or more but no more than 690 mm, for use in the manufacture of motor vehicles of subheadings 8703 40 and 8703 60(1)

0.8377 ex 8708 40 50 70 Automatic transmission equipped with double clutch system with: 0 % — 31.12.2027 — at least 8 gears, — an engine torque of 800 Nm or more, — an electronic differential, — a P-lock safety system, and — a TCU transmission control unit, for use in the manufacture of motor vehicles of heading 8703(1) 362/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7987 *ex 8708 50 20 15 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, 0 % — 31.12.2030 made of material suitable to be carburized with a carbon content of 0,14 % or more but not ex 8708 50 55 50 more than 0,57 %, forged, turned, punched, milled and hardened

0.8461 ex 8708 50 20 18 Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: 0 % — 31.12.2027 — two cardan rods, — central universal joint, — central bearing with suspension in a plastic cover, — universal joints on both ends of the shaft, — slip, tube and end yokes, — of a length of 1,4 m or more but not more than 2,4 m, for use in the production of goods of Chapter 87(1)

0.6648 *ex 8708 50 20 20 Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any 0 % p/st 31.12.2030 joint in the middle ex 8708 50 99 10 — of a length of 1 m or more but not more than 2 m, — of a weight of 6 kg or more but not more than 9 kg

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 363/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7988 *ex 8708 50 20 25 Ball-type outboard constant velocity joint housing for transmitting a torque from the engine 0 % — 31.12.2030 and transmission to the wheels of motor vehicles, in a form of an outer race, with:

ex 8708 50 99 45 — 6 ball tracks or more but not more than 8, with — a thread, — an external involute spline with 21 or more but not more than 38 teeth, — for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, — forged, turned, milled and hardened

0.7989 *ex 8708 50 20 35 Inboard constant velocity joint tripod housing, with: 0 % — 31.12.2030 ex 8708 50 99 50 — an outer diameter of 67,0 mm or more but not more than 99,0 mm, — 3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, — an external spline with 21 teeth or more but not more than 41, — forged, turned, rolled and hardened 364/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7359 ex 8708 50 20 50 Double flange bearing of 3rd generation, for motor vehicles, 0 % — 31.12.2027 ex 8708 50 55 20 — with double-row ball bearing, ex 8708 50 91 10 — whether or not with impulse (encoder) ring, ex 8708 50 99 40 — whether or not with antilock brake system (ABS) sensor, — whether or not with mounted screws, for use in the manufacture of goods of Chapter 87(1)

0.7991 *ex 8708 50 20 55 Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: 0 % — 31.12.2030 ex 8708 50 99 60 — 3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, — forged, turned, broached and hardened

0.7593 ex 8708 50 20 70 Housing of tripod type half shaft inboard joint for transmitting a torque from engine and 0 % — 31.12.2029

transmission to wheels of motor vehicles with: ex 8708 50 99 25 — an outer diameter of 67,0 mm or more but not more than 84,5 mm, — 3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, — sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, — spline with 21 teeth or more but not more than 35, — bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 365/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7640 *ex 8708 50 20 75 Constant velocity joint assembly for transmitting a torque from engine and transmission to 0 % — 31.12.2029 wheels of motor vehicles, consisting of: ex 8708 50 99 35 — an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0 mm or more but not more than 28,0 mm, — an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 22 teeth or more but not more than 44, — a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,55 %, and — with a grease compartment, — capable of working at constant speed at variable articulation angle not higher than 52 degrees

0.6711 *ex 8708 80 20 10 Upper strut insulator containing: 0 % p/st 31.12.2030 ex 8708 80 35 10 — a metal holder with three mounting screws, and — a rubber bump, for use in the manufacture of goods of Chapter 87(1) 366/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7365 ex 8708 80 99 30 Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor 0 % — 31.12.2027

vehicles: — with a chrome coating, — of a diameter of 11 mm or more, but not more than 28 mm, — of a length of 80 mm or more, but not more than 600 mm, with a threaded end or a mandrel for resistance welding

0.6509 ex 8708 91 20 20 Aluminium cooler using compressed air with a ribbed design of a kind used in the 0 % p/st 31.12.2029 manufacture of goods of Chapter 87 ex 8708 91 35 10

0.6859 *ex 8708 91 20 30 Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, 0 % p/st 31.12.2030 manufactured to standard EN AC 42100 or EN AC 43000 T6 with: ex 8708 91 99 30 — an insulating area flatness of not more than 0,1 mm, — a permissible particle quantity of 0,3 mg per tank, — a distance between pores of 2 mm or more, — pore sizes of not more than 0,4 mm, and — not more than 3 pores larger than 0,2 mm, — with a weight of 0,2 kg or more but not more than 3 kg

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 367/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7716 ex 8708 91 35 20 Turbocharger cooling duct containing: 0 % — 31.12.2029 — an aluminium alloy duct with at least one metal holder and at least two mounting holes, — a rubber pipe with clips, — a stainless steel flange highly resistant to corrosion [SUS430JIL], for use in the manufacture of compression ignition engines of motor vehicles(1)

0.8538 ex 8708 91 35 30 Two-circuit aluminium heat exchanger for automatic transmission of passenger cars: 0 % — 31.12.2028 — of the stack-plate type, — with two pairs of inlet and outlet, each for the coolant/water circuit and the transmission oil circuit, — with at least two mounting holes, — whether or not with the connection hoses, for use in the manufacture of goods of Chapter 87(1)

0.8812 ex 8708 91 35 40 Radiators: 0 % — 31.12.2029 — with corrosion protection, — for pressures up to 150 PSI (1 034 kPa), — with individual replaceable, cooling tubes in brass or copper, for use in the production of engine and charge air cooling with a weight of 265 kg or more but not more than 599 kg(1) 368/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8775 ex 8708 94 99 10 Hub gear made of cold rolled carbon steel (per ASTM A1008), molded into the plastic and 0 % — 31.12.2029 pressed on pinion, with: — an outer diameter of 81,2 mm or more, but not more than 82,55 mm, — an inner diameter of 25,9 mm or more, but not more than 25,97 mm, — a height of the lower side of inner diameter of 11,63 mm or more, but not more than 12,13 mm, — a height of the upper side of inner diameter of 3,25 mm or more, but not more than 3,5 mm, — an overall height of 11,63 mm or more, but not more than 19,5 mm for use in the manufacture of vehicle’s steering system(1)

0.8777 ex 8708 94 99 20 Intermediate steering shaft forming part of the steering column with: 0 % — 31.12.2029 — a torsional rigidity of 25 Nm/degree or more, — a tubular male shaft in welded carbon steel tube (per GB/T 699 grade 20), — a tubular female shaft in welded carbon steel tube (per with GB/T 699 grade 20), — two spiders universal joint made of chromium alloy steel (per GB/T 5216 grade 20CrMnTiH), — a length in nominal telescope position of 396 mm or more but not more than 467 mm, — a coupling interface on both ends with internal toothing, — two cardan joints on both sides, — a telescope shaft function with a range of 74 mm or more but not more than 115 mm, for use in the manufacture of vehicle’s steering system(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 369/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8778 ex 8708 94 99 30 Lower assist shaft as part of the steering column made of carbon steel (per GB/T699 grade 45 0 % — 31.12.2029 or JIS G4051 grade S45C) with: — an ultimate torsional strength load of 325 Nm or more and Johnson Apparent Elastic Limit (J.A.E.L) values of 275 Nm or more, — a length of 66,39 mm or more but not more than 88,64 mm, — an outer diameter of 27,47 mm or more but not more than 28,38 mm, — an inner hole of diameter 6,50 mm or more but not more than 6,58 mm, — an external 26-teeth spline with major diameter 21,18 mm or more but not more than 21,44 mm, — a knurling on a part of outer surface of major diameter 26,0 mm or more but not more than 26,1 mm, — with or without an external 24-tooth spline and with a major diameter 24,75 mm or more but not more than 25 mm, for use in the manufacture of vehicle’s steering system(1)

0.8779 ex 8708 94 99 40 Upper assist shaft as part of the steering column made of carbon steel (per GB/T699 grade 45) 0 % — 31.12.2029

with: — an ultimate torsional strength load of 325 Nm or more and Johnson Apparent Elastic Limit (J.A.E.L) values of 275 Nm or more, — a length of 165,3 mm or more but not more than 204,2 mm, — an outer diameter of 22,87 mm or more but not more than 22,92 mm, — an internal hole of diameter 6,50 or more but not more than 6,58 mm, — an external spline, for use in the manufacture of vehicle’s steering system(1) 370/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8780 ex 8708 94 99 50 Lower shaft as part of the steering column made of aluminium alloy (per ASTM B221M grade 0 % — 31.12.2029

6105), air quenched and tempered with: — an ultimate torsional strength of 260 Nm or more, — a length of 296,7 mm or more but not more than 297,8 mm, — an external 18-tooth spline on all shaft length with major diameter of 28,7 mm or more but not more than 29 mm, — an 18-tooth internal spline with a minor diameter of 19,7 mm or more but not more than 20 mm, for use in the manufacture of vehicle’s steering system(1)

0.8782 ex 8708 94 99 60 Torsion bar as part of the steering column made of carbon alloy steel (per SAE J1268, grade 0 % — 31.12.2029 5160H of modified chemistry for carbon content of 0,53 or more, but not more than 0,56)

with: — a shaft torsional stiffness of 2,5 Nm/degree or more but not more than 2,7 Nm/degree, — a length of 107,75 mm or more but not more than 108,25 mm, — an outer diameter of 6,38 mm or more but not more than 6,42 mm, — two external 18-tooth splines on both shaft ends with a major diameter of 6,70 mm or more but not more than 6,85 mm, as interface to pressing with matting input and output shafts, — entire surface shot peened, for use in the manufacture of vehicle’s steering system(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 371/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8781 ex 8708 94 99 70 Tubular steering shaft as part of the steering column made of carbon steel welded tube (per EN 0 % — 31.12.2029 10305/2, E235 + C or GB/T699 grade 20) with: — an ultimate torsional strength of 300 Nm or more and Johnson Apparent Elastic Limit (J.

A.E.L) values of 275 Nm or more, — a length of 245,48 mm or more but not more than 287,5 mm, — an outer diameter of 23,95 mm or more but not more than 32,25 mm, — an interface for steering wheel connection either in a form of an external 40-tooth spline with major diameter of 17,1 mm or more but not more than 17,5 mm and an internal thread M12x1,75-6H or in a form of an external hexagon with a short diagonal of 15,05 mm or more but not more than 15,35 mm and an internal thread M10x1.5-6H, — an interface either in a form of an internal 10-tooth spline of length of 98,0 mm or more but not more than 160 mm, with minor diameter of 16,1 mm or more but not more than 16,4 mm or in a form of an internal 48-tooth spline of length of 151 mm or more but not more than 160 mm, with minor diameter of 23,2 mm or more but not more than 23,3 mm, for use in the manufacture of vehicle’s steering system(1)

0.6688 *ex 8708 95 10 20 Inflatable safety cushion of high strength polyamide fibre: 0 % p/st 31.12.2030 ex 8708 95 99 30 — sewn, — folded, — with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing, — suitable for cool inflator technology 372/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6687 *ex 8708 95 10 30 Inflatable sewn safety cushion of high strength polyamide fibre: 0 % p/st 31.12.2030 ex 8708 95 99 40 — folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or — flat safety cushion with or without thermal folding

0.8292 ex 8708 95 99 50 Airbag inflator containing both pyrotechnics and cold gas as propellant for safety airbags of 0 % p/st 31.12.2026 vehicles, in each individual consignment of 1 000 pieces or more

0.6583 ex 8708 99 10 60 Aluminium engine bracket, with dimensions of: 0 % p/st 31.12.2029 ex 8708 99 97 50 — height of more than 10 mm but not more than 200 mm, — width of more than 10 mm but not more than 250 mm, — length of more than 10 mm but not more than 200 mm, equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:

— internal porosity not more than 1 mm, — outer porosity not more than 2 mm, — rockwell hardness HRB 10 or more, of a kind used in the production of suspensions systems for engines in motor vehicles

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 373/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8771 ex 8708 99 97 43 Outer tie rod with a housing made of AISI 4137 (SCM435) steel or EN10083/2- C45R + N 0 % — 31.12.2029 steel or JIS G4053-SCM435 low alloy steel, with: — a ball stud made of EN 10263/4 – 41CrS4 Q + T steel or AISI 4137 (SCM435) steel or EN10083/3-42CrMoS4Q + T steel or JIS G4053-SCM435 low alloy steel, — a polyoxymethylene plastic ball seat, — a distance between the end of the threaded hole and the centre of the ball stud of 124 mm or more but not more than 194 mm, — a ball stud diameter of 21,98 mm or more but no more than 22 mm, — a threaded hole depth of 40,5 mm or more but no more than 52 mm with dimensions M14x1,5, — a boot seal, — a boot seal protector and retaining ring, — lubricant, for use in the manufacture of vehicle’s steering system(1)

0.8986 *ex 8708 99 97 53 Roll rod assembly for the front suspension in vehicles for connecting the stabilizer to the 0 % — 31.12.2030

suspension components: — made of aluminium, rubber, and plastic, — with a height of 270 mm or more, but not more than 300 mm, — with a width of 50 mm or more, but not more than 65 mm, — with a length of 150 mm or more, but not more than 170 mm, for use in the manufacture of motor vehicles(1) 374/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8973 *ex 8708 99 97 58 Mounting bracket of front radiator or intercooler: 0 % — 31.12.2030 — made of iron or steel or of plastics, — whether or not with rubber cushioning, for use in the manufacture of goods of heading 8708(1)

0.6848 ex 8714 10 90 70 Motor bikes radiators in consignment of 100 pieces or more 0 % p/st 31.12.2027

0.6172 ex 8714 91 30 25 Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the 0 % — 31.12.2029 manufacture of bicycles (including electric bicycles)(1) ex 8714 91 30 35 ex 8714 91 30 72

0.8959 *ex 8714 93 00 20 Gear set to connect sprockets: 0 % — 31.12.2030 — for mounting on a hub drum, — with 7 sprockets or more but not more than 12 sprockets, — with 10 or more but not more than 52 teeth for each sprocket, — with a weight of 200 g or more but not more than 800 g, — sprockets made of nickel-plated steel or aluminium, — with connectors (spacers) between the sprockets made of plastic or aluminium, — without a pawl mechanism, for use in the manufacture of bicycles and e-bikes(1)

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 375/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6879 *ex 8714 96 10 10 Pedals, for use in the manufacture of bicycles (including electric bicycles)(1) 0 % — 31.12.2030

0.7421 ex 8714 99 10 20 Bicycle handlebars: 0 % — 31.12.2027 ex 8714 99 10 89 — with or without an integrated stem, — either made out of carbon fibres and synthetic resin or made of aluminium, for use in the manufacture of bicycles (including electric bicycles)(1)

0.7710 ex 8714 99 50 11 Derailleur gears, consisting of: 0 % p/st 31.12.2029 ex 8714 99 50 91 — rear derailleur and mounting articles, — with or without front derailleur, for use in the manufacture of bicycles (including electric bicycles)(1)

0.6878 *ex 8714 99 90 30 Seat posts, for use in the manufacture of bicycles (including electric bicycles)(1) 0 % p/st 31.12.2030

0.7708 ex 8714 99 90 40 Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric 0 % p/st 31.12.2029 bicycles)(1)

0.8507 ex 8714 99 90 50 Rear air shock absorber in form of a pneumatic spring element with oil damper for use in the 0 % p/st 31.12.2027 manufacture of bicycles, including electrical bicycles(1)

0.3191 ex 9001 10 90 10 Image reverser made up from an assembly of optical fibres 0 % — 31.12.2029 376/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6402 ex 9001 50 41 40 Organic uncut corrective eyeglass lens, finished on both sides, to undergo a coating, 0 % — 31.12.2027 colouring, edging, mounting or any other substantial process for use in the manufacture of ex 9001 50 49 40 corrective glasses(1)

0.6401 ex 9001 50 80 30 Round organic uncut, semi-finished eyeglass lens with corrective effect, finished on one side, 0 % — 31.12.2026 of a kind used for the manufacture of finished eyeglass lenses

0.7590 ex 9002 11 00 18 Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical 0 % — 31.12.2029

elements with: — a horizontal field of view range to a maximum of 120 deg, — a diagonal field of view range to a maximum of 105 deg, — a focal length to a maximum of 7,50 mm, — a relative aperture of a maximum of F/2,90, — a maximum diameter of 22 mm

0.5692 ex 9002 11 00 20 Lenses: 0 % — 31.12.2027 — measuring not more than 95 mm × 55 mm × 50 mm, — with a resolution of 160 lines/mm or better, and — with a zoom ratio of 3 or more times

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 377/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.7973 *ex 9002 11 00 23 Lens with: 0 % — 31.12.2030 — motorized focus, zoom, aperture, — electronically switchable infrared cut filter, — an adjustable focal length not less than 2,7 mm and not more than 55mm, — a weight of not more than 120 g, — a length of less than 70 mm, — a diameter of not more than 70 mm

0.7103 ex 9002 11 00 45 Infrared optical unit: 0 % — 31.12.2026 — with lenses of silicon, germanium or chalcogenide glass of a diameter not more than 62 mm (± 0,05 mm), — whether or not mounted on a machined aluminium alloy support of a kind used for thermal cameras or IP network cameras

0.3177 ex 9002 11 00 50 Lens unit: 0 % — 31.12.2029 — having a focal length of 25 mm or more but not more than 150 mm, — consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm 378/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.6572 ex 9002 11 00 85 Lens assembly with: 0 % — 31.12.2029 — a horizontal field of view range of 20 deg or more, but not more than 200 deg, — a focal length of 1,16 mm or more, but not more than 20 mm, — a relative aperture of F/1,2 or more, but not more than F/4, and — a diameter of 5 mm or more, but not more than 40 mm, for use in the manufacture of CMOS automotive cameras or in IP network cameras production(1)

0.6288 ex 9025 80 40 50 Electronic semiconductor sensor for measuring at least two of the following quantities: 0 % p/st 31.12.2029 — Atmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds, — in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing:

— one or more monolithic application-specific integrated circuits (ASIC), — one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material, of a kind used for incorporation into products of Chapters 84 to 90 and 95

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 379/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.3292 ex 9032 89 00 30 Electronic controller of electric power steering (EPS controller) 0 % p/st 31.12.2029

0.4253 ex 9032 89 00 40 Digital valve controller for controlling liquids and gases 0 % p/st 31.12.2027

0.7004 ex 9032 89 00 50 Gas panel for regulating and controlling of the gas flow rate, working with plasma technology, 0 % — 31.12.2026 comprising — an electronic mass flow regulator, suitable for receiving and sending of analogue and digital signals — four pressure transducers, — two or more pressure valves, — electric interfaces and — several connectors for gas lines — suitable for in-situ plasma bonding processes or for multi frequency bond activating processes

0.5025 ex 9401 99 20 10 Ratchet disk for use in the manufacture of reclining car seats(1) 0 % p/st 31.12.2028

0.8989 *ex 9401 99 20 20 A high-mobility positioning cassette, 0 % — 31.12.2030 — capable of operating within a temperature range of – 40 °C to + 85 °C, — enables controlled forward and backward movement of a vehicle seat, — integrated with the seat backrest via a steel cable system, preventing seat removal when the backrest is open and allowing it only when the backrest is closed, — constructed from glass fiber-reinforced, special alloy aluminium components and fitted with self-lubricating bushings made of polyoxymethylene (POM) and polytetrafluoroethylene (PFTE) to minimize friction, — equipped with a locking system designed to remain secure under forces up to 20G, — requires a minimum force of 40N for normal operation 380/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025Rate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.8786 ex 9503 00 95 30 Miniature engine: 0 % — 31.12.2029 — consisting of a plastic body, — containing a spring, — providing movement of gear shafts with spring tension, for use in the manufacture of the toys under heading 9503(1)

0.8789 ex 9503 00 95 40 Miniature engine driven by mechanical friction: 0 % — 31.12.2029 — consisting of a plastic body, — with shaft length 10,5 cm or more but not more than 14,5 cm, — containing a metal disc, — creating movement by causing the gears to rotate with the friction force, for use in the manufacture of the toys under heading 9503(1)

0.3286 ex 9608 91 00 10 Non-fibrous plastic pen-tips with an internal canal 0 % — 31.12.2029

0.3289 ex 9608 91 00 20 Felt tips and other porous-tips for markers, without internal canal 0 % — 31.12.2029

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj 381/382 OJ L,

30.12.2025 ENRate of Serial Supplementary Date envisaged for CN code TARIC Description autonomous Number Unit mandatory review duty

0.2737 ex 9612 10 10 10 Ribbons of plastic with segments of different colours, providing the penetration of dyes by 0 % — 31.12.2029 heat into a support (so called dye-sublimation)

(1) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.

(2) However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.

(3) Only the ad valorem duty is suspended. The specific duty shall continue to apply.

(4) A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Articles 55 and 56 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558, ELI: http://data.europa.eu/eli/reg_impl/2015/2447/oj).

* New or amended measure.’.

382/382

ELI:

http://data.europa.eu/eli/reg/2025/2605/oj EN OJ L,

30.12.2025