Council Regulation (EU) 2026/1463 of 25 June 2026 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council on certain agricultural and industrial products

Official Journal EN of the European Union L series 2026/1463 30.6.2026 COUNCIL REGULATION (EU) 2026/1463 of 25 June 2026 amending Regulation (EU) 2021/2278 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council on certain agricultural and industrial products THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof, Having regard to the proposal from the European Commission, Whereas: (1) In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are not produced in the Union, and thereby avoid any disturbances on the market for those products, Common Customs Tariff duties of the type referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council(1)(‘CCT duties’) on those products have been suspended by Council Regulation (EU) 2021/2278(2). As a result, the products listed in the Annex to Regulation (EU) 2021/2278 can be imported into the Union at reduced or zero duty rates without any limitation as regards their quantity. (2) The Union production of certain products that are not listed in the Annex to Regulation (EU) 2021/2278 is inadequate to meet the specific requirements of the user industries in the Union. As it is in the Union’s interest to ensure an adequate supply of certain products, and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to grant a complete suspension of the CCT duties on those products. (3) With a view to promoting integrated battery production in the Union, a partial suspension of CCT duties should be granted in respect of certain products related to battery production that are currently not listed in the Annex to Regulation (EU) 2021/2278 and the Union production of which is inadequate to meet the specific requirements of the user industries in the Union. The mandatory review of those suspensions should be completed by 31 December 2026 in order to set out the short-term evolution of the battery production sector in the Union. (4) It is necessary to amend the product description, classification, or end-use requirement for certain products listed in the Annex to Regulation (EU) 2021/2278 in order to take into account technical product developments and economic trends in the market. (5) In accordance with Article 2(2) of Regulation (EU) 2021/2278 the Commission has reviewed certain CCT duty suspensions for products listed in the Annex to that Regulation. As it is in the interest of the Union to maintain those CCT duty suspensions for certain of those products, new dates should be set for their next mandatory review. (6) It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) 2021/2278. Those products should therefore be removed from that Annex, with effect from 1 July 2026. (7) Regulation (EU) 2021/2278 should therefore be amended accordingly. (1) Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1, ELI: http://data.europa.eu/eli/reg/2013/952/oj). (2) Council Regulation (EU) 2021/2278 of 20 December 2021 suspending the Common Customs Tariff duties referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 on certain agricultural and industrial products, and repealing Regulation (EU) No 1387/2013 (OJ L 466, 29.12.2021, p. 1, ELI: http://data.europa.eu/eli/reg/2021/2278/oj). ELI: http://data.europa.eu/eli/reg/2026/1463/oj 1/42EN OJ L, 30.6.2026 (8) In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 July 2026. This Regulation should therefore enter into force as a matter of urgency, HAS ADOPTED THIS REGULATION: Article 1 The Annex to Regulation (EU) 2021/2278 is amended in accordance with the Annex to this Regulation. Article 2 This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union. It shall apply from 1 July 2026. This Regulation shall be binding in its entirety and directly applicable in all Member States. Done at Luxembourg, 25 June 2026. For the Council The President M. PANAYIOTOU 2/42 ELI: http://data.europa.eu/eli/reg/2026/1463/ojANNEX The Annex to Regulation (EU) 2021/2278 is amended as follows: (1) the entries with the following serial numbers are deleted: 0.3341, 0.8865, 0.7594, 0.8425, 0.5110, 0.8425, 0.7540, 0.7541, 0.5495, 0.6802, 0.8795, 0.8877, 0.5987, 0.7056, 0.7056, 0.8668, 0.8669, 0.8680, 0.8675 and 0.8647; (2) the following entries replace those entries that have the same serial numbers: Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review ‘0.4080 ex 1517 90 99 30 Microbial oil, refined, containing by weight: 0 % — 31.12.2026 — 25 % or more but not more than 70 % arachidonic acid and no more than 5 % docosahexenoic acid — standardised with vegetable oil 0.6144 ex 2835 10 00 50 Sodium hypophosphite (CAS RN 7681-53-0) with a purity by weight of 0 % — 31.12.2029 97 % or more or as aqueous solution containing by weight 55 % or more but not more than 65 % of sodium hypophosphite 0.6482 ex 2841 70 00 50 Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or 0 % — 31.12.2029 as tetrahydrate (CAS RN 12054-85-2) with a purity by weight of 98 % or more 0.5936 ex 2841 90 70 20 Potassium titanium oxide (CAS RN 12056-51-8) in powder form with 0 % — 31.12.2029 a purity of 99 % or more ELI: http://data.europa.eu/eli/reg/2026/1463/oj 3/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.7097 ex 2842 10 00 60 Aluminosilicate (CAS RN 1318-02-1) with 0 % — 31.12.2026 — a purity by weight of 94 % or more, — a zeolite structure of aluminophosphate-eighteen (AEI), and — a phase purity of 90 % or more for use in the manufacture of copper zeolite or washcoat used in the automotive catalyst production(1) 0.4529 ex 2903 99 80 28 Fluorobenzene (CAS RN 462-06-6) with a purity by weight of 99 % or 0 % — 31.12.2029 more 0.6560 ex 2904 99 00 78 1-Chloro-2-nitrobenzene (CAS RN 88-73-3) with a purity by weight of 0 % — 31.12.2029 99 % or more 0.6257 ex 2906 19 00 80 4-tert-Butylcyclohexanol (CAS RN 98-52-2) with a purity by weight of 0 % — 31.12.2029 97 % or more 0.5503 ex 2909 30 39 20 1,1′-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] 0 % — 31.12.2026 (CAS RN 21850-44-2) 0.6649 ex 2909 30 39 30 1,1′-(1-Methylethylidene)bis 0 % — 31.12.2030 [3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7) 0.7828 ex 2909 30 39 50 2-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity 0 % — 31.12.2029 by weight of 99 % or more 4/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.4274 ex 2914 19 90 80 3-Methylbutanone (CAS RN 563-80-4) with a purity by weight of 97 % 0 % — 31.12.2027 or more 0.4227 ex 2914 39 00 35 Benzophenone (CAS RN 119-61-9) with a purity by weight of 99 % or 0 % — 31.12.2027 more 0.7407 ex 2915 90 90 20 Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5) 0 % — 31.12.2027 0.7542 ex 2915 90 90 25 Methyl octanoate (CAS RN 111-11-5), methyl decanoate 0 % — 31.12.2029 (CAS RN 110-42-9) or methyl myristate (CAS RN 124-10-7) 0.6003 ex 2915 90 90 27 Triethyl orthoformate (CAS RN 122-51-0) with a purity by weight of 0 % — 31.12.2029 99 % or more 0.5767 ex 2915 90 90 30 3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5) 0 % — 31.12.2027 0.8154 ex 2915 90 90 33 Ethyl 8-bromooctanoate (CAS RN 29823-21-0) with a purity by weight 0 % — 31.12.2026 of 98 % or more 0.8423 ex 2915 90 90 43 Trifluoroacetic anhydride (CAS RN 407-25-0) with a purity by weight of 0 % — 31.12.2027 98 % or more 0.6255 ex 2915 90 90 45 Trimethyl orthoformate (CAS RN 149-73-5) 0 % — 31.12.2029 0.8457 ex 2915 90 90 53 3-Chloro-2,2-dimethylpropanoyl chloride (CAS RN 4300-97-4) with 0 % — 31.12.2027 a purity by weight of 98 % or more ELI: http://data.europa.eu/eli/reg/2026/1463/oj 5/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.4954 ex 2915 90 90 60 Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0) 0 % — 31.12.2030 0.3638 ex 2918 29 00 85 Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] 0 % — 31.12.2029 (CAS RN 35074-77-2) with a purity by weight of 97 % or more 0.3978 ex 2921 42 00 38 2-Nitroaniline (CAS RN 88-74-4) with a purity by weight of 99 % or 0 % — 31.12.2029 more 0.2609 ex 2921 45 00 15 N-1-Naphthylaniline (CAS RN 90-30-2) with a purity by weight of 98 % 0 % — 31.12.2029 or more 0.4160 ex 2924 19 00 58 N,N-Dimethylacrylamide (CAS RN 2680-03-7) with a purity by weight 0 % — 31.12.2026 of 97 % or more 0.6266 ex 2924 29 70 59 2-(Trifluoromethyl)benzamide (CAS RN 360-64-5) with a purity by 0 % — 31.12.2029 weight of 98 % or more 0.3526 ex 2925 11 00 40 1,2-Benzisothiazol-3(2H)-one 1,1-dioxide (CAS RN 81-07-2) or its 0 % — 31.12.2029 sodium salt (CAS RN 128-44-9) or its sodium salt dihydrate (CAS RN 6155-57-3) with a purity by weight of 98 % or more 0.2661 ex 2928 00 90 73 3,3′-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N′-bipropionamide 0 % — 31.12.2029 (CAS RN 32687-78-8) with a purity by weight of 97 % or more 0.5918 ex 2928 00 90 78 Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1) with 0 % — 31.12.2029 a purity by weight of 99 % or more 6/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.8701 ex 2929 90 90 80 Wet paste or powder 0 % — 31.12.2029 — with a content by weight of N′,N′ ′-[(2S,3E,5S)-1,6-diphenylhex-3-ene-2,5-diyl]bis(N,N-dimethylsulfuric diamide) (CAS RN 1247119-27-2) of 70 % or more, — with a content by weight of water of not more than 30 % — and with a dry weight purity of N′,N′ ′-[(2S,3E,5S)-1,6-diphenylhex-3-ene-2,5-diyl]bis(N,N-dimethylsulfuric diamide) (CAS RN 1247119-27-2) of 90 % or more 0.7464 ex 2933 69 80 48 2-(4,6-Bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol 0 % — 31.12.2029 (CAS RN 2725-22-6) with a purity by weight of 98 % or more 0.8054 ex 2933 99 80 76 2-Methylindoline (CAS RN 6872-06-6) with a purity by weight of 98 % 0 % — 31.12.2026 or more 0.4942 ex 2934 99 90 47 2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8) with a purity 0 % — 31.12.2030 by weight of 97 % or more 0.8830 ex 3809 91 00 30 Aqueous antimony pentoxide mixture containing by weight: 0 % — 31.12.2029 — 46 % or more but not more than 55 % of antimony pentoxide (CAS RN 1314-60-9), and — 1 % or more but not more than 10 % of triethanolamine (CAS RN 102-71-6), or — 1 % or more but not more than 10 % of triethanolamine phosphate (CAS RN 10017-56-8) ELI: http://data.europa.eu/eli/reg/2026/1463/oj 7/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.3448 ex 3811 21 00 38 Solution of mineral oils (CAS RN 64742-52-5, 64742-53-6, 0 % — 31.12.2029 64742-56-9 or blends thereof) containing by weight: ex 3811 90 00 60 — 25 % or more but not more than 55 % of the barium, calcium, magnesium or zinc salt of dinonylnaphthylsulphonic acid (CAS RN 25619-56-1, 28015-99-8, 28016-00-4, or 57855-77-3) — whether or not, not more than 25 % of the barium, calcium, magnesium or zinc salt of a mixture of C3-C24 carboxylic acids (CAS RN 68990-37-4) 0.2800 ex 3815 12 00 50 Catalyst in the form of granules, wheels or ring-shaped structures 0 % — 31.12.2029 — of a diameter of 3 mm or more, but not exceeding 10 mm, — containing 8 % or more but not more than 40 % by weight of silver — on a carrier based on aluminium oxide, — with one or more promoters 0.2783 ex 3815 90 90 60 Dinonylnaphthalenedisulfonic acid (CAS RN 60223-95-2) with 0 % — 31.12.2026 a content by weight of 50 % or more but not more than 65 %, in the form of a solution in isobutanol (CAS RN 78-83-1) 8/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.6672 ex 3906 90 90 28 Mixture containing by weight: 0 % — 31.12.2030 — 80 % or more but not more than 90 % of a core shell polymer of butyl acrylate, ethyl acrylate, methyl-acrylate and allyl methacrylate (CAS RN 73026-23-0), and — 10 % or more but not more than 20 % of a copolymer of methyl methacrylate and ethyl acrylate (CAS RN 9010-88-2) 0.5507 ex 3919 90 80 58 Biaxially-oriented film of poly(methyl methacrylate), with a thickness of 0 % — 31.12.2029 20 μm or more but not more than 90 μm, covered on one side with an adhesive layer and a release sheet 0.7949 ex 3920 61 00 40 Extruded thermoplastic foils or films of polycarbonate with: 0 % — 31.12.2030 — matt surface texture on both sides — a thickness of more than 50 μm but not more than 200 μm, — a width of 800 mm or more, but not more than 1 500 mm, and — a length of 300 m or more, but not more 2 500 m for use in the production of retroreflective products(1) 0.7196 ex 3926 90 97 77 Silicone decoupling ring with an inner diameter of 13,2 mm or more but 0 % p/st 31.12.2026 no more than 17,2 mm, in immediate packings of 2 500 pieces or more, of a kind used in car parking aid sensor systems ELI: http://data.europa.eu/eli/reg/2026/1463/oj 9/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.8024 ex 5911 40 00 10 Non-wovens, consisting of poly(ethylene terephthalate) spun bonded 0 % m2 31.12.2029 media: — in the piece, cut to length or simply cut to rectangular (including square) shape, — of weight of 160 g/m2 or more but not more than 300 g/m2, — with a filtration efficiency of class L or better (according to DIN 60335-2-69), — pleatable, with or without following treatments: — a coating or covering with polytetrafluoroethylene (PTFE), — a coating with aluminium particles, — a coating of phosphorous based flame retardants, — a nano fiber coating of a polyamide, a polyurethane or a fluorine-containing polymer — an expanded polytetrafluoroethylene (ePTFE) membrane 10/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.5024 ex 8301 60 00 30 Silicone or plastic keyboards, comprising: 0 % p/st 31.12.2030 ex 8419 90 85 40 ex 8479 90 70 30 — parts of common metal, and ex 8481 90 00 50 ex 8485 90 90 30 — whether or not comprising parts of plastic, ex 8503 00 98 43 ex 8515 90 80 40 — epoxy resin reinforced with fiberglass or wood, ex 8537 10 98 55 ex 8538 90 99 70 ex 8708 99 10 55 — whether or not printed or surface-treated, ex 8708 99 97 22 — with or without electrical conductors, — with or without a membrane bonded to the keyboard, — with or without mono or multilayer protective film 0.8818 ex 8406 81 00 10 Industrial steam turbine with: 0 % — 31.12.2029 — an output of more than 40 MW but not more than 90 MW, — designed for a pressure of not more than 165 bar and a temperature of not more than 565 °C, — equipped with individually controlled single or double seat valves on the live steam side which are operated with a hydraulic servo of not more than 30 bar ELI: http://data.europa.eu/eli/reg/2026/1463/oj 11/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.8148 ex 8412 90 70 20 Bedplate made of solution strengthened ductile iron castings (SSDI), for 0 % p/st 31.12.2027 anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with: — a length of 3,5 m or more but not more than 4,5 m, — a width of 2 m or more but not more than 4,2 m, — a height of 1 m or more, but not more than 1,3 m, — a weight of 11 tons or more but not more than 21,5 tons, — mounting bores for yawdrive, — a mounting flange for gearbox support, — drivetrain mount, — different screw sockets 0.8856 ex 8418 99 90 80 An evaporator being a type of heat exchanger, consisting of aluminium 0 % — 31.12.2029 pipes with copper ends enclosed with aluminium radiators: — measuring 337 x 237 x 17 mm or more, but not more than 868 x 399 x 78 mm, — with a total weight of a set of 236 g or more, but not more than 1 750 g, — with a fixed sensor, — with or without noise absorber, — with 2, 5 or 7 control and power connection pins terminated with sensor temperature type of socket, with or without heater and fuse type of socket, for use in the manufacture of products of subheadings 8418 10, 8418 21, 8418 40(1) 12/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.4855 ex 8501 33 90 30 Electric drive for motor vehicles, with an output of not more than 0 % — 31.12.2026 315 kW: ex 8501 40 80 50 ex 8501 53 50 10 — with an AC or DC motor with or without transmission, — with or without power electronics 0.4450 ex 8504 31 80 30 Transformers, having a power handling capacity of not more than 1 kVA 0 % — 31.12.2029 for use in the manufacture of static converters and goods of heading 8537(1) 0.8660 ex 8507 60 00 26 Modules for the assembly of electric accumulators using lithium 1,3 % — 31.12.2026 ferrophosphate technology (LFP) with: — a length of 670 mm or more, but not more than 882 mm, — a width of 390 mm or more, but not more than 655 mm, — a height of 110 mm or more, but not more than 155 mm, — a weight of 60 kg or more, but not more than 165 kg, and — a power of 11 300 Wh or more, but not more than 29 360 Wh ELI: http://data.europa.eu/eli/reg/2026/1463/oj 13/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.6753 ex 8507 60 00 77 Lithium-ion rechargeable batteries, with: 1,3 % — 31.12.2026 — a length of 700 mm or more, but not more than 2 820 mm, — a width of 935 mm or more, but not more than 1 660 mm, — a height of 85 mm or more, but not more than 700 mm, — a weight of 250 kg or more, but not more than 700 kg, — a power of not more than 175 kWh, — a nominal voltage of 320 V or more, but not more than 430 V for use in the manufacture of vehicles of subheadings 8701 to 8705(1) 0.8841 ex 8537 10 91 75 Printed circuit board equipped with a microcontroller for operating 0 % — 31.12.2029 and/or control purposes — with or without operating components, signal components and display, — for operating voltages of 5V DC or more but not more than 24V DC or 220V AC or more but not more than 400V AC, — with or without housing for use in the manufacture of household appliances of subheadings 7321 11, 8414 60, 8418 10, 8418 21, 8418 29, 8418 40, 8422 11, 8450 11, 8450 12, 8450 19, 8450 20, 8451 21, 8451 29, 8516 60(1) 14/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.6377 ex 8544 30 00 53 Electrical wiring harness or cable for the steering system: 0 % p/st 31.12.2029 ex 8544 42 90 75 — with a rated voltage of 12 V, — fitted with connectors on both ends or/and with special adapter providing sealing and anti-rotation feature, — with or without plastic anchoring jaws for mounting the steering gear housing of motor vehicles, for use in the manufacture of power steering systems for motor vehicles(1) 0.8292 ex 8708 95 99 50 Airbag inflator containing pyrotechnics, whether or not cold gas, as 0 % p/st 31.12.2026 propellant for safety airbags of vehicles, in each individual consignment of 1 000 pieces or more 0.6572 ex 9002 11 00 85 Lens with 0 % — 31.12.2029 — a horizontal field of view of 20o or more, but not more than 220o, — a focal length of 1,16 mm or more, but not more than 20 mm, — a relative aperture of f/1,2 or more, but not more than f/4, and — a diameter of 5 mm or more, but not more than 40 mm, for use in the manufacture of CMOS vehicle-mounted cameras or IP network cameras(1) (1) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.’; ELI: http://data.europa.eu/eli/reg/2026/1463/oj 15/42 OJ L, 30.6.2026 EN(3) the following entries are inserted according to the numerical order of the CN and TARIC codes in the second and third columns: Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review ‘0.9085 ex 1515 60 99 20 Microbial oil, refined or semi-refined, but not chemically modified, 0 % — 31.12.2030 containing by weight in the form of triglycerides: — 35 % or more but not more than 70 % of arachidonic acid — not more than 3 % by weight of docosahexaenoic acid 0.9064 ex 2904 99 00 75 Trifluoromethanesulfonic acid (CAS RN 1493-13-6) with a purity by 0 % — 31.12.2030 weight of 99 % or more 0.9088 ex 2905 29 90 50 Prop-2-yn-1-ol (CAS RN 107-19-7) with a purity by weight of 99 % or 0 % — 31.12.2030 more 0.9071 ex 2921 43 00 45 α,α,α-Trifluoro-o-toluidine (CAS RN 88-17-5) with a purity by weight of 0 % — 31.12.2030 98 % or more 0.9016 ex 2922 29 00 53 m-Anisidine (CAS RN 536-90-3) with a purity by weight of 95 % or more 0 % — 31.12.2030 0.9012 ex 2924 29 70 44 4-(2,2-Diethoxyacetyl)-3,5-difluoro-N-methylbenzamide (CAS RN 0 % — 31.12.2030 3089027-90-4) with a purity by weight of 95 % or more 0.9010 ex 2928 00 90 68 Ethyl hydrazinoacetate hydrochloride (CAS RN 6945-92-2) with a purity 0 % — 31.12.2030 by weight of 98 % or more 16/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9006 ex 2930 90 95 22 4,4,5,5,5-Pentafluoropentyl carbamimidothioate-methanesulfonate (1:1) 0 % — 31.12.2030 (CAS RN 1107606-68-7) with a purity by weight of 99 % or more 0.9011 ex 2930 90 95 24 Trimethyloxosulfonium chloride (CAS RN 5034-06-0) with a purity by 0 % — 31.12.2030 weight of 98 % or more 0.9004 ex 2931 90 00 21 (2-Fluoro-4-phenoxyphenyl)boronic acid (CAS RN 1414356-30-1) with 0 % — 31.12.2030 a purity by weight of 95 % or more 0.9013 ex 2932 19 00 38 (2,2-Diphenyltetrahydrofuran-3-yl)methanol (CAS RN 93651-75-3) with 0 % — 31.12.2030 a purity by weight of 98 % or more 0.9015 ex 2933 19 90 78 3-(3-Methyl-5-oxo-4,5-dihydro-1H-pyrazol-1-yl)benzenesulfonic 0 % — 31.12.2030 acid (CAS RN 119-17-5) with a purity by weight of 95 % or more 0.9075 ex 2933 19 90 83 Isomeric mixture containing by weight 97 % or more of the two isomers 0 % — 31.12.2030 — 2-(3,4-Dimethyl-1H-pyrazol-1-yl)succinic acid, and — 2-(4,5-Dimethyl-1H-pyrazol-1-yl)succinic acid (CAS RN 2241455-89-8) 0.9008 ex 2933 39 99 19 5-Chloro-1-(4-piperidyl)-1H-benzimidazol-2(3H)-one (CAS RN 0 % — 31.12.2030 53786-28-0) with a purity by weight of 99 % or more 0.9060 ex 2933 39 99 94 Cyantraniliprole (ISO) (CAS RN 736994-63-1) with a purity by weight of 0 % — 31.12.2030 90 % or more ELI: http://data.europa.eu/eli/reg/2026/1463/oj 17/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.8997 ex 2933 59 95 35 3-Iodo-1H-pyrazolo[3,4-d]pyrimidin-4-amine (CAS RN 151266-23-8) 0 % — 31.12.2030 with a purity by weight of 98 % or more 0.9061 ex 2933 59 95 40 Pirimiphos-methyl (ISO) (CAS RN 29232-93-7) with a purity by weight of 0 % — 31.12.2030 90 % or more 0.9058 ex 2933 69 80 38 Tris({[1,1′-biphenyl]-4-yl})-1,3,5-triazine (CAS RN 31274-51-8) with 0 % — 31.12.2030 a purity by weight of 97 % or more 0.9009 ex 2933 99 80 83 1-(3-Chloropropyl)-1,3-dihydro-2H-benzimidazol-2-one 0 % — 31.12.2030 (CAS RN 62780-89-6) with a purity by weight of 97 % or more 0.8994 ex 2933 99 80 84 Allyl (2S,4S)-4-benzoylsulfanyl-2-(dimethylcarbamoyl) 0 % — 31.12.2030 pyrrolidine-1-carboxylate (CAS RN 141818-73-7) with a purity by weight of 96 % or more 0.8996 ex 2934 99 90 32 (6R,7R)-Benzhydryl 0 % — 31.12.2030 3-hydroxy-8-oxo-7-(2-phenylacetamido)-5-thia-1-azabicyclo[4.2.0] oct-2-ene-2-carboxylate (CAS RN 54639-48-4) with a purity by weight of 95 % or more 0.9005 ex 2934 99 90 34 Benzyl 4-(oxetan-3-yl)piperazine-1-carboxylate (CAS RN 1254115-22-4) 0 % — 31.12.2030 with a purity by weight of 99 % or more 0.9007 ex 2934 99 90 36 Nadide phosphate (INNM) disodium salt (CAS RN 24292-60-2) with 0 % — 31.12.2030 a purity by weight of 97 % or more 18/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.8993 ex 2934 99 90 46 (6R-trans)-7-Amino-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo- 0 % — 31.12.2030 1,2,4-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2- carboxylic acid (CAS RN 58909-56-1) with a purity by weight of 97 % or more 0.9056 ex 3204 17 00 32 Colourant C.I. Pigment Violet 23 (CAS RN 215247-95-3) and preparations 0 % — 31.12.2030 based thereon with a colourant C.I. Pigment Violet 23 content of 70 % or more by weight 0.9074 ex 3810 10 00 10 Tin or zinc based, halide free, surface mount technology processing solder 0 % — 31.12.2030 paste: — with metal contents of 87,5 % or more, but not more than 90,1 % by weight, — with an alloy solidus temperature of 210 °C or more, — with a viscosity of 178 Pa· s or more, but not more than 235 Pa· s, — with a particle size of 40 μm or less, — with a silver content either of 3,15 % or more, but not more than 3,5 % by weight for tin based paste or of 0,25 % or more, but not more than 0,28 % by weight for zinc based paste, — with or without bismuth content of 2,55 % or more, but not more than 2,71 % by weight, — with or without copper content of 0,6 % or more, but not more than 0,7 % by weight ELI: http://data.europa.eu/eli/reg/2026/1463/oj 19/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9073 ex 3815 12 00 40 Catalyst used to obtain paraxylene and orthoxylene by isomerization of 0 % — 31.12.2030 methaxylene containing by weight: — 60 % or more but not more than 95 % of aluminum oxide (CAS RN 1344-28-1), — 5 % or more but not more than 15 % of aluminosilicate (CAS RN 1327-36-2), — not more than 2 % of platinum (CAS RN 7440-06-4), — not more than 2 % aluminum chloride hydroxide (CAS RN 12042-91-0), — not more than 0,2 % of hydrogen sulfide (CAS RN 7783-06-4) 0.9086 ex 3815 19 90 33 Catalyst, in powder form, consisting of a mixture of metal oxides fixed to 0 % — 31.12.2030 a silicon dioxide support, with a total content by weight of molybdenum, bismuth and iron of 20 % or more but not more than 50 %, for use in the manufacture of acrylonitrile(1) 20/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9062 ex 3824 99 96 38 Low outgassing thermally conductive silicone paste: 0 % — 31.12.2030 — with thermal conductivity when cured of 3,45 W/(m·K) or more but not more than 3,55 W/(m·K), — with continuous use temperature minimum range from -60o C to 200o C, — with heat capacity when cured of 0,75 J/g· K or more but not more than 0,85 J/g· K, — with volume resistivity when cured of 1 010 Ω· m or more, — packaged in containers of 30 kg or more 0.8999 ex 3902 90 90 63 Hydrogenated poly(1-octene) (CAS RN 70693-43-5) 0 % — 31.12.2030 0.9078 ex 3907 29 20 63 Preparation containing by weight 0 % — 31.12.2030 — 5 % or more but not more than 15 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6), and — 85 % or more but not more than 95 % of oxirane, 2-methyl-,polymer with oxirane, ether with 5-(2-(4-(bis(2-hydroxyethyl) amino)-2-methylphenyl) diazenyl)-3-methyl-2,4-thiophenedicarbonitrile (2:1) (CAS RN 515857-23-5) ELI: http://data.europa.eu/eli/reg/2026/1463/oj 21/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9079 ex 3907 29 20 65 Preparation containing by weight 0 % — 31.12.2030 — 40 % or more but not more than 60 % of oxirane, 2-methyl-, polymer with oxirane, ether with 2,2-[[3-methyl-4-[(4-methyl-2-benzothiazolyl) azo]phenyl]imino]bis[ethanol] (2:1) (CAS RN 229306-55-2), and — 40 % or more but not more than 60 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6) 0.9077 ex 3907 29 20 68 Preparation containing by weight 0 % — 31.12.2030 — 90 % or more but not more than 99 % of oxirane, 2-methyl-,polymer with oxirane, ether with ethyl 3-(4-(bis(2-hydroxyethyl)amino) phenyl)-2-cyano-2-propenoate (2:1) (CAS RN 152286-82-3), and — 1 % or more but not more than 10 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6) 0.9081 ex 3907 29 20 70 Preparation containing by weight 0 % — 31.12.2030 — 50 % or more but not more than 70 % of oxirane, methyl-polymer with oxirane, ether with bis(4-[bis(2-hydroxyethyl)amino)phenyl] (2-sulfophenyl)methyl (4:1), monosodium salt block (CAS RN 126042-89-5), and — 30 % or more but not more than 50 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6) 22/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9082 ex 3907 29 20 73 Preparation containing by weight of 0 % — 31.12.2030 — 23 % or more but not more than 36 % of oxirane, 2-methyl-,polymer with oxirane, ether with bis(4-(bis(2-hydroxyethyl)amino)phenyl) (2-sulfophenyl)methyl (4:1), monosodium salt, block (CAS RN 126042-89-5), — 4 % or more but not more than 20 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6), — 25 % or more but not more than 30 % of oxirane, 2-methyl-,polymer with oxirane, ether with 2,2′-((3-methyl-4-((4-methyl-2-benzothiazolyl)azo)phenyl)imino)bis (ethanol)(2:1) (CAS RN 229306-55-2), — 5 % or more but not more than 10 % of oxirane, 2-methyl-,polymer with oxirane, ether with 5-(2-(4-(bis(2-hydroxyethyl) amino)-2-methylphenyl) diazenyl)-3-methyl-2,4-thiophenedicarbonitrile (2:1) (CAS RN 515857-23-5), and — 15 % or more but not more than 25 % of oxirane, 2-methyl-,polymer with oxirane, ether with ethyl 3-(4-bis(2-hydroxyethyl)amino) phenyl)-2-cyano-2-propenoate (2:1) (CAS RN 152286-82-3) ELI: http://data.europa.eu/eli/reg/2026/1463/oj 23/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9080 ex 3907 29 20 75 Preparation containing by weight 0 % — 31.12.2030 — 60 % or more but not more than 80 % of Oxirane, 2-methyl-,polymer with oxirane, ether with 2,2′,2′′,2′′′-(sulfonylbis (4,1-phenylene)-2,1-diazenediyl(3-methyl-4,1-phenylene)nitrilo)) tetrakis(ethanol) (4:1) (CAS RN 927432-39-1), and — 20 % or more but not more than 40 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6) 0.9001 ex 3919 90 80 57 Self-adhesive polycarbonate film, printed, whether or not arched, with: 0 % — 31.12.2030 — a thickness of 0,3 mm or more, but not more than 0,4 mm, — minimum dimensions of 63 mm x 15 mm, — maximum dimensions of 278 mm x 117 mm, — a weight of not more than 5 g per piece, intended for integration into combined instrument panels of passenger cars 24/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9057 ex 3920 62 19 70 Poly(ethylene terephthalate) film in rolls with: 0 % — 31.12.2030 — a thickness of 35 μm or more, but not more than 75 μm, — a tensile strength of 40 MPa or more in the machine direction (MD) and 200 MPa or more in the transverse direction (TD), — an elongation at break of 400 % or more in MD and 30 % or more in TD, — a heat shrinkage (in water at 90 °C/10s) in MD of 0,49 % or more, but not more than 0,51 %, — a dynamic heat shrinkage (between 55 °C and 70 °C) in TD of not more than 20 percentage points, — a light transmittance of 85 % or more, — a haze ratio of not more than 6 %, — a surface tension of 38 mN/m or more, — a density of 1,30 g/cm3 or more, but not more than 1,34 g/cm3, — a shelf life declared by the manufacturer of not less than 12 months ELI: http://data.europa.eu/eli/reg/2026/1463/oj 25/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9055 ex 3921 19 00 53 Sheets of closed-cell silicone foam with: 0 % — 31.12.2030 — a thickness of 2,0 mm or more but not more than 4,8 mm, — a thermal insulation of more than 0,25 Km2/W but not more than 0,4 Km2/W (according to ASTM-C518) — a dielectric strength of more than 3,0 Kv/mm but not more than 3,8 Kv/mm (according to ASTM-D149) 0.9048 ex 5401 10 14 10 Core yarn of high tenacity polyester filament surrounded by polyester 0 % — 31.12.2030 staple fibres: — with a twist of 410 TPM or more but not more than 1 200 TPM, — with a linear density of 200 dtex or more but not more than 1 500 dtex, — with an average tenacity of 46 cN/tex or more, — with an elongation at break of 13 % or more but not more than 23 %, — wound on a perforated dyeing tube, — with a weight, including tube, of 900 g or more 26/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9003 ex 5402 20 00 07 High tenacity polyester multifilament yarn: 0 % — 31.12.2030 — with final twist in Z direction; — with a linear density of 100 dtex or more, but not more than 4 000 dtex — with an average minimum tenacity of 64 cN/tex; — with an elongation at break of 12 % or more, but not more than 28 %; — with a shrinkage in 98 °C of 0 % or more, but not more than 3,5 %; — wound on the perforated dyeing tube with 0,9 kg of yarn or more ready for dyeing 0.9063 ex 5503 90 00 40 Staple fibres with a poly(ethylene terephthalate) core fully encapsulated by 0 % — 31.12.2030 polyethylene with: — a linear density of 0,60 dtex or more but not more than 1,60 dtex, — a staple fibre length of 37 mm or more but not more than 44 mm, — an elongation at break of 80 % or more, — a tenacity of 1 cN/dtex or more ELI: http://data.europa.eu/eli/reg/2026/1463/oj 27/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.8939 ex 5603 94 80 50 Needle-punched spunbond nonwovens, consisting of polyamide fibres 0 % — 31.12.2030 individually coated with polyvinylalcohol, containing by weight 20 % or more but not more than 40 % of polyvinylalcohol weighing 400 g/m2 or more 0.9053 ex 6804 21 00 50 Wheels suitable for grinding, rounding, polishing, aligning or cutting: –0 % — 31.12.2026 — composed of metal base and agglomerated synthetic or natural diamonds, — whether or not containing a hole in the centre, — with an external diameter not more than 870 mm, for machines for the manufacture of semiconductor wafers(1) 0.8998 ex 6814 10 00 20 Phlogopite mica tape bonded with silicone resin to a glass fabric reinforced 0 % — 31.12.2030 polyethylene film, — with a thickness of 0,10 mm or more but not more than 1,60 mm, — with a width of 500 mm or more but not more than 1 200 mm, — a mica content of 80 g/m2 or more but not more than 165 g/m2, — a tensile strength of 110 N/cm or more but not more than 130 N/cm 28/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9059 ex 7002 20 90 10 Cylindrical shaped glass preforms of high-purity silica glass (quartz): 0 % — 31.12.2030 — with an optical core made of germanium-doped silica glass (quartz), intended for the production of low-loss optical fiber: — with a length of not more than 2 500 mm, — with a diameter of 115 mm or more but not more than 139 mm, — on one side with a conical end — on the other side with a handle with a diameter of 25,4 mm, coated at the end with aluminium oxide 0.9054 ex 7019 61 00 60 Flexible prepreg in sheets or rolls, 0 % — 31.12.2030 — of modified epoxy resin with embedded glass fabric, — without halogenated flame retardants — with a TMA glass transition of 145 °C or more but not more than 200 °C (ASTM E1545) — specified according to IPC-4101/128, 130, 153 or 154 ELI: http://data.europa.eu/eli/reg/2026/1463/oj 29/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9087 ex 7410 21 00 65 Sheets or Plates 0 % — 31.12.2030 — consisting of at least one layer of fiberglass fabric impregnated with modified epoxy resin, without the use of halogenated flame retardants, — covered on one or both sides with copper foil with a thickness of 0,15 mm or less, — and with a TG of 145 °C or more but not more than 280 °C according to TMA, in agreement with IPC-4101/128 or 4101/130 or IPC-4101/153 or 4101/154 0.9049 ex 8110 90 00 10 Antimony-Beryllium pellets containing by weight: 0 % — 31.12.2030 — 20 % or more but not more than 25 % of beryllium (CAS 7440-41-7) — 77 % or more but not more than 83 % of antimony (CAS 7440-36-0) 30/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9018 ex 8414 30 20 60 Hermetic compressor for R290 refrigerant for the production of –0 % — 31.12.2030 refrigerators and freezers: — with a power not exceeding 0,4 kW, — pre-filled with lubricant from 190 ml to 210 ml, — suction and processing pipe inner diameter from 6,40 mm to 6,60 mm, — discharge pipe inner diameter from 4,80 mm to 5,00 mm, — driven by a brushless DC motor, — cooling capacity from 340 to 360 W at ASHRAE LBP 3 000 rpm, — displacement from 6,5 cm3 to 7,5 cm3, — speed range from 1 600 rpm to 4 200 rpm(1) ELI: http://data.europa.eu/eli/reg/2026/1463/oj 31/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9045 ex 8414 59 35 50 DC motor centrifugal fan with: 0 % p/st 31.12.2030 — a nominal voltage of 8 V or more, but not more than 13 V, — a nominal maximum speed of 1 400 rpm or more, but not more than 1 950 rpm, — a horizontal or vertical position of the fan blades shaft, — a boosting time of not more than 10 seconds, — a cable with a length of 30 cm or more, but not more than 50 cm, with RAST 2,5 connector, — a nominal power of 0,7 W or more, but not more than 3,5 W, — a tacho or feedback signal to monitor the speed 32/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9044 ex 8418 99 90 70 Household appliances condenser, being a type of heat exchanger, made 0 % — 31.12.2030 entirely of aluminium A3102, A3003, A4045 or A4343, consisting of two vertical pipes and arranged horizontally between them 16 parallel flat tubes with fins, with: — one vertical pipe with inlet and outlet tubes, — a width of 297 mm or more, but not more than 373 mm, — a height of 154 mm or more, but not more than 158 mm, — a depth of 17 mm or more, but not more than 23 mm, — a flatness tolerance of less than 2 mm for the fin pack within the condenser core, — a weight of 224 g or more, but not more than 283 g 0.9023 ex 8483 30 80 30 Commutator end shield (bearing housing with plain shaft bearing) for 0 % — 31.12.2030 starter motors of passenger cars and commercial vehicles — produced with high pressure precision die casting technology, — made of aluminium alloy (EN AC-46000 or EN AC-46000 S, according to the DIN EN 1706 and GB/T 16116 standards), — with sintered plain bearing ELI: http://data.europa.eu/eli/reg/2026/1463/oj 33/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9040 ex 8483 50 80 50 Metal spinned single or double pulley: 0 % — 31.12.2030 — made of DC03 steel or similar non alloy steel or free cutting steel, — with a pitch diameter of 67 mm or more but not more than 145 mm, — with an inner hole designed for bearing mounting or key mounting 0.9039 ex 8483 50 80 60 Metal spinned triple pulley: 0 % — 31.12.2030 — made of DC03 steel or similar non-alloy steel or free cutting steel, — with a pitch diameter of 60 mm or more, but not more than 130 mm, — with an inner hole designed for bearing mounting 0.9025 ex 8483 60 80 20 Overrunning clutch for passenger car and commercial vehicle starter 0 % — 31.12.2030 motors with: — a total length of 49,4 mm or more but not more than 210 mm, — a starter motor pinion with 9 or more but not more than 16 teeth 34/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9037 ex 8501 52 20 55 Brushless synchronous alternating current electric motors with permanent 0 % p/st 31.12.2030 magnets, with: — an output power of 1 000 W or more, but not more than 1 400 W, — a rotor containing 8 poles, generated by permanent magnets composed mainly of praseodymium-neodymium-iron-boron (GB/T 13560-2017 standard), enclosed in a stainless steel cover, — a motor magnet shaft end outer diameter of 10,001 mm or more, but not more than 10,007 mm, — motor terminals located across the 37,00 mm radius and separated by an angle of 30,00 o, — a motor housing made of ADC12 or EN AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302-2000 or EN 1706 standard), — a back electromotive force constant (Ke) of 0,0265 V-sec/rad or more, but not more than 0,0293 V-sec/rad, — a back electromotive force (EMF) harmonic order – 5th of no more than 0,4 % (of fundamental) and 7th of no more than 0,2 % (of fundamental), — a synchronous inductance of 33,49 μH or more, but not more than 37,01 μH, — a cogging torque of not more than 15 mNm, — a friction torque in ambient temperature of not more than 20 mNm, — a maximum motor operation temperature of not more than 200 °C, with or without a spline on the motor shaft ELI: http://data.europa.eu/eli/reg/2026/1463/oj 35/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9020 ex 8503 00 20 20 Plated steel core of the electric motor rotor of electric air conditioning 0 % — 31.12.2030 compressors for motor vehicles: — with an outer diameter of 65 mm or more but not more than 80 mm, — with an inner diameter of 15 mm or more but not more than 25 mm, — with a height of 30 mm or more but not more than 45 mm, — with a weight of 0,5 kg or more but not more than 0,8 kg, — without windings 0.9019 ex 8503 00 20 30 Plated steel core of the electric motor stator of electric air conditioning 0 % — 31.12.2030 compressors for motor vehicles: — with an outer diameter of 90 mm or more but not more than 120 mm, — with an inner diameter of 65 mm or more but not more than 80 mm, — with a height of 30 mm or more but not more than 45 mm, — with a weight of 0,7 kg or more but not more than 1,2 kg, — without windings 36/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9021 ex 8503 00 98 45 Armature for the electric motor in starter motors of passenger cars and 0 % — 31.12.2030 commercial vehicles with: — an outer diameter of 52 mm or more but not more than 80 mm, — a commutator copper wire diameter of 2 mm or more but not more than 4 mm 0.9026 ex 8511 90 00 20 Drive end shield for starter motors and alternators of passenger cars and 0 % — 31.12.2030 commercial vehicles — produced with high pressure precision die casting technology, — made of aluminium alloy (EN 1706 grade AC-47100 or AC-47100 S or AC-46000 or AC-46000 S or AC-44300), — whether or not with bearing 0.9022 ex 8511 90 00 30 Commutator for passenger car and commercial vehicle starter motors 0 % — 31.12.2030 — with a length of 27,7 mm or more but not more than 44,6 mm, — with umbrella or drum design ELI: http://data.europa.eu/eli/reg/2026/1463/oj 37/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9043 ex 8516 80 80 10 Electric heating resistor with a triple loop design: 0 % — 31.12.2030 — mainly made of AISI 316L stainless steel, — with a rated voltage of 230V, — with a rated power of 2 000 W, — with a total heating element length of 217 mm or more, but not more than 223 mm, — with a heating element working length of 169,5 mm or more, but not more than 174,5 mm, — with a mounting flange diameter of 28 mm or more, but not more than 32 mm, — with a heating element bending radius of 10,75 mm, — equipped with thermal fuses, — without a built-in NTC sensor, — with nickel plated terminal pin and connector 38/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9014 ex 8544 30 00 23 High-voltage single-core battery supply cable fitted with: 0 % — 31.12.2030 — a high-voltage connector, — a metal flat lug with an eyelet in a plastic housing, — three or more plastic mounting clips for use in the manufacture of rechargeable batteries for hybrid and electric vehicles(1) 0.9000 ex 8544 30 00 33 Wiring harness for transmitting safety parameters from battery modules 0 % — 31.12.2030 fitted with: — input and output connectors, — three or more plastic mounting clips for use in the manufacture of rechargeable batteries for hybrid and electric vehicles(1) 0.9002 ex 8544 30 00 43 High voltage battery cable assembly, comprising: 0 % — 31.12.2030 — a single core high voltage cable terminated with a flat lug, — a safety fuse for an electric current of 10 A or more but not more than 400 A, — a flat copper conductor with surface insulation terminated with a flat lug, — three or more plastic clips for attachment for use in the manufacture of rechargeable batteries for hybrid and electric vehicles(1) ELI: http://data.europa.eu/eli/reg/2026/1463/oj 39/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9027 ex 8547 90 00 10 Li-ion battery module component made of mica for fire protection, with 1,85 % — 31.12.2026 a specially designed shape for the top and sides with: — a length of 480,0 or more but not more than 630,0 mm, — a width of 78,0 or more but not more than 233,0 mm and — a thickness of 0,75 or more but not more than 2,50 mm 0.9038 ex 8548 00 90 45 Electromagnetic Interference filter designed to eliminate conducted 0 % — 31.12.2030 electromagnetic interference from a power line, — with a rated voltage of 250 V AC, — with a rated current of not more than 15 A, — with an operating frequency of 50/60 Hz, — with a dielectric strength of 1 500V AC for 1 minute, — containing a bleeder resistor with a resistance of 470 kΩ, — containing three varistors: one with rated voltage of 680 V, one of 910 V and one of 1 800 V, each ±10 %, — mounted with an M8 screw with an average breaking force of 93 kgf/cm 40/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026Rate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9033 ex 8708 94 99 80 Blank assembly worm gear, consisting of a hub of carbon steel (GB/T 699 0 % — 31.12.2030 grade 25 or DIN EN 10277 grade 11SMn30) and a ring of cast polyamide 6/12 with: — an outer diameter of 97,35 mm or more, but not more than 102,65 mm, — an inner diameter of 27,91 mm or more, but not more than 27,93 mm, — a height of the hub of 11,75 mm or more, but not more than 12,00 mm, — an overall height of 16,00 mm or more, but not more than 18,00 mm 0.9029 ex 8708 99 97 27 Inner pole electromagnet core used in Magneto-Rheological engine mounts 0 % — 31.12.2030 to reduce shocks and for isolation and damping in passenger cars: — of a powder metal assembly, — with a diameter of not more than 90,95 mm, — with an overall height of 24,5 mm, — impregnated with sealant, — zinc plated ELI: http://data.europa.eu/eli/reg/2026/1463/oj 41/42 OJ L, 30.6.2026 ENRate of Date envisaged for Serial Number CN code TARIC Description Supplementary Unit autonomous duty mandatory review 0.9030 ex 9401 99 20 30 Latch seat system modules enabling seat sliding, latching and unlatching in 0 % — 31.12.2030 random, independent positions along the rails: — with an integrated safety locking mechanism, — with a cassette architecture for integration with seat through screw connections, — with a housing made of a magnesium die-cast alloy, — with an anti-noise system, — interfacing with car rail systems, — without electronic control unit, — without semiconductors, — with a weight of 1 475 g or more, but not more than 1 619 g (1) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.’. 42/42 ELI: http://data.europa.eu/eli/reg/2026/1463/oj EN OJ L, 30.6.2026