Home Europe EEA Joint Committee Decision of the EEA Joint Committee No 192/2025 of 19 Septem...
Date: 2026-01-15 Category: Not Applicable State: Union Government Country: Europe

Decision of the EEA Joint Committee No 192/2025 of 19 September 2025 amending Annex II (Technical regulations, standards, testing and certification) to the EEA Agreement [2026/11]

Issued by EEA Joint Committee · Not Applicable

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

**Executive Summary** This document is the Decision of the EEA Joint Committee No 192/2025, dated 19 September 2025, amending Annex II (Technical regulations, standards, testing and certification) to the EEA Agreement. It incorporates Commission Implementing Decision (EU) 2024/2904 regarding the publication of references of European Assessment Documents into the EEA Agreement. The decision enters into force on 20 September 2025, pending necessary notifications. **Key Points / Main Content** * **Amendment to Annex II:** * Commission Implementing Decision (EU) 2024/2904 is added to point 1zzp of Chapter XXI of Annex II to the EEA Agreement. This decision concerns European Assessment Documents for internal doorsets and construction products. * **Authentic Text:** * The text of Implementing Decision (EU) 2024/2904 in Icelandic and Norwegian languages will be published in the EEA Supplement to the Official Journal of the European Union and shall be authentic. * **Entry into Force:** * The Decision enters into force on 20 September 2025, contingent upon all notifications under Article 103(1) of the EEA Agreement having been made. * **Publication:** * The Decision will be published in the EEA Section and the EEA Supplement to the Official Journal of the European Union. **Impact Analysis** **EEA Joint Committee** * **Impact:** Responsible for implementing the decision to amend Annex II of the EEA Agreement. * **Action Required:** Ensure the publication and integration of the decision into the EEA legal framework. **EEA Member States (including Iceland and Norway)** * **Impact:** Need to comply with the updated technical regulations and standards introduced by the incorporated decision. * **Action Required:** Implement the provisions of Commission Implementing Decision (EU) 2024/2904 within their national legal systems. Ensure Icelandic and Norwegian translations are available and authentic. **Manufacturers and Suppliers of Construction Products** * **Impact:** Affected by the changes in technical regulations, standards, testing, and certification procedures for internal doorsets and other construction products. * **Action Required:** Adapt their products and processes to comply with the requirements specified in Commission Implementing Decision (EU) 2024/2904.

Key Entities Referenced

EEA Agreement: Agreement on the European Economic Area which this decision amends. EEA Joint Committee: The committee responsible for making the decision. Annex II: Specific Annex to the EEA Agreement relating to Technical regulations, standards, testing and certification, being amended by this decision. Commission Implementing Decision (EU) 2024/2904: Commission Implementing Decision being incorporated into the EEA Agreement. Brussels: Location where the decision was made.
Official Source Record View Original Source →
See Full Document Text
Official Journal EN of the European Union L series 2026/11 15.1.2026 DECISION OF THE EEA JOINT COMMITTEENo 192/2025 of 19 September 2025 amending Annex II (Technical regulations, standards, testing and certification) to the EEA Agreement [2026/11] THE EEA JOINT COMMITTEE, Having regard to the Agreement on the European Economic Area (“the EEA Agreement”), and in particular Article 98 thereof, Whereas: (1) Commission Implementing Decision (EU) 2024/2904 of 14 November 2024 amending Implementing Decision (EU) 2019/450 as regards the publication of references of European Assessment Documents for internal doorsets without resistance to fire and smoke control characteristics made of metal profiles and bound polystyrene bulk material for thermal insulation, sound insulation or both and other construction products(1)is to be incorporated into the EEA Agreement. (2) Annex II to the EEA Agreement should therefore be amended accordingly, HAS ADOPTED THIS DECISION: Article 1 The following indent is added in point 1zzp (Commission Implementing Decision (EU) 2019/450) of Chapter XXI of Annex II to the EEA Agreement: ‘— 32024 D 2904: Commission Implementing Decision (EU) 2024/2904 of 14 November 2024 (OJ L, 2024/2904, 19.11.2024).’ Article 2 The text of Implementing Decision (EU) 2024/2904 in the Icelandic and Norwegian languages, to be published in the EEA Supplement to the Official Journal of the European Union, shall be authentic. Article 3 This Decision shall enter into force on 20 September 2025, provided that all the notifications under Article 103(1) of the EEA Agreement have been made(*). Article 4 This Decision shall be published in the EEA Section of, and in the EEA Supplement to, the Official Journal of the European Union. Done at Brussels, 19 September 2025. For the EEA Joint Committee The President Stefán Haukur JÓHANNESSON (1) OJ L, 2024/2904, 19.11.2024, ELI: http://data.europa.eu/eli/dec_impl/2024/2904/oj. (*) No constitutional requirements indicated. ELI: http://data.europa.eu/eli/dec/2026/11/oj 1/1

Continue your research