## Policy Analysis Report: Antidumping Duty on Plastic Processing Machines
**1. Executive Summary:**
This report analyzes a notification from the Ministry of Finance, Department of Revenue, imposing an antidumping duty on imports of Plastic Processing Machines (PPM) originating in or exported from China PR and Taiwan. The policy aims to protect the domestic industry from material injury caused by dumped imports. The key finding is the establishment of specific antidumping duties based on the country of origin, export, and producer, as outlined in the attached table. This duty is calculated as a percentage of the CIF value.
**2. Introduction:**
This report provides an informative overview of Notification No. 21/2025-Customs, concerning the imposition of an antidumping duty on Plastic Processing Machines. This analysis is based solely on the text provided in the notification.
**3. Policy Overview:**
This is a new policy imposing an antidumping duty.
* **Core Objective(s):** The core objective, as stated, is to remove the injury to the domestic industry caused by the dumped imports of Plastic Processing Machines from China PR and Taiwan.
**4. Background and Rationale:**
* **Problem/Issue Addressed:** The policy addresses the issue of Plastic Processing Machines being exported to India from China PR and Taiwan at dumped prices. This practice has resulted in material injury to the domestic industry, necessitating the imposition of an antidumping duty to create a level playing field. The designated authority's findings support this rationale.
**5. Key Provisions / Changes:**
* **New Policy:**
* Imposes an antidumping duty on Plastic Processing Machines (PPM), also known as injection moulding machines or injection pressers.
* The product scope includes all kinds of plastic processing or injection moulding machines, having a clamping force not less than 40 tonnes and not more than 1500 tonnes. It includes machines in fully assembled, semi knocked down (SKD), complete knocked down form (CKD), or a combination of SKD/CKD. Specific definitions for SKD and CKD forms are provided.
* Excludes specific products from the scope: blow moulding machines, vertical injection moulding machines, all electric injection moulding machines, multicolour/multimould machinery for making footwear, rotary injection moulding machinery for making footwear and footwear sole/strap/heel injection moulding machine, second hand/used plastic processing machines, imports of any standalone parts/components and clamping/clamp unit or injection unit with out screw barrel, machine base frame and fabrication frames/covers imported for production of a machine other than injection moulding machines.
* The duty is calculated as a percentage of the CIF value, varying based on the country of origin, country of export, and the specific producer. A detailed table provides the specific duty rates for various producers in China PR and Taiwan.
* The duty is applicable for a period of five years from the date of publication, unless revoked, superseded, or amended earlier.
**6. Target Audience and Stakeholders:**
The primary target audience includes:
* **Importers of Plastic Processing Machines:** Those importing PPMs from China PR and Taiwan will be directly affected by the antidumping duty.
* **Domestic Manufacturers of Plastic Processing Machines:** This policy is designed to protect them from unfair competition.
* **Producers in China PR and Taiwan:** The specific producers mentioned in the table are directly impacted by the duty rates applied to their exports.
**7. Implementation Aspects (Inferred):**
* **Responsible agency/bodies:** The Ministry of Finance (Department of Revenue) is responsible for issuing the notification. The "designated authority" (likely the Directorate General of Trade Remedies (DGTR)) conducted the investigation and recommended the duty. Customs officials are responsible for assessing and collecting the antidumping duty.
* **Timelines or procedures:** The antidumping duty is effective from the date of publication of the notification and is valid for five years unless revoked, superseded, or amended earlier. The rate of exchange for calculating the duty is determined by a separate notification issued under Section 14 of the Customs Act, 1962. The relevant date for exchange rate determination is the date of presentation of the bill of entry.
**8. Expected Outcomes / Impact of Changes:**
* **Likely intended outcomes:** The intended outcome is to mitigate the material injury suffered by the domestic industry due to the dumped imports of PPMs from China PR and Taiwan. This should create a more competitive environment for domestic producers, potentially leading to increased production, sales, and profitability. The increased cost of imported PPMs will likely be passed on to consumers or absorbed by importers/foreign producers.
**9. Conclusion:**
The imposition of antidumping duty on Plastic Processing Machines from China PR and Taiwan represents a significant measure aimed at protecting the Indian domestic industry from unfair trade practices. The specific duty rates and exemptions outlined in the notification provide clarity for importers and domestic producers alike. The long-term impact will depend on factors such as the responsiveness of domestic producers, the ability of importers to absorb or pass on the duty costs, and potential adjustments by foreign producers.
Key Entities Referenced
NEW DELHI: Place of publication of the Gazette notification
ASHADHA: A month in the Hindu calendar, corresponding to June-July in the Gregorian calendar, mentioned in the context of the date.
Ministry of Finance, Department of Revenue: The Indian government ministry and department issuing the notification.
Customs Tariff Act, 1975: Indian law governing customs tariffs.
China PR: Country of origin or export of the subject goods (Plastic Processing Machines).
Taiwan: Country of origin or export of the subject goods (Plastic Processing Machines).
India: Country importing the subject goods (Plastic Processing Machines).
Plastic Processing Machines: The subject goods under consideration for antidumping duty.
Customs Tariff Identification, Assessment and Collection of Antidumping Duty on Dumped Articles and for Determination of Injury Rules, 1995: Rules governing the imposition of antidumping duty.
Central Government: The entity imposing the antidumping duty.
Dongguan Fu Chun Shin Plastic Machinery Manufacture Co., Ltd.: Producer of Plastic Processing Machines from China PR
Fu Chun Shin Ningbo Machinery Manufacture Co., Ltd: Producer of Plastic Processing Machines from China PR
Chen Hsong Machinery Co Ltd: Producer of Plastic Processing Machines from China PR
Chen Hsong Sales Marketing Shenzhen Co., Ltd: Producer of Plastic Processing Machines from China PR
Chen Hsong Machinery Ningbo Co., Ltd.: Producer of Plastic Processing Machines from China PR
Chen Hsong Machinery Shenzhen Co., Ltd: Producer of Plastic Processing Machines from China PR
Foshan Shunde Chen De Precision Machinery Co., Ltd.: Producer of Plastic Processing Machines from China PR
Foshan Shunde Chen De Plastics Machinery Co., Ltd: Producer of Plastic Processing Machines from China PR
Yizumi Precision Molding Technology Co., Ltd.: Producer of Plastic Processing Machines from China PR
Yizumi High Speed Packaging Technology Co., Ltd: Producer of Plastic Processing Machines from China PR
Yizumi Precision Machinery HK Co., Limited: Producer of Plastic Processing Machines from China PR
Yizumi Precision Machinery Suzhou Co., Ltd: Producer of Plastic Processing Machines from China PR
Husky Injection Molding Systems Shanghai Ltd: Producer of Plastic Processing Machines from China PR
Chen Hsong Machinery Taiwan Co., Ltd.: Producer of Plastic Processing Machines from Taiwan
Huarong Plastic Machinery Co., Ltd: Producer of Plastic Processing Machines from Taiwan
Customs Act, 1962: Indian law pertaining to customs duties and regulations. Mentioned in the Explanation section regarding the rate of exchange for antidumping duty calculation.
DGTR: Designated Authority, likely referring to the Directorate General of Trade Remedies, which made the final findings.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-26062025-264166
CG-Dx Lx -x EG -I 2D 6H 0x 6x 2x
0 25-264166
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग II—खण् ड 3—उप-खण्ड (i)
PART II—Section 3—Sub-section (i)
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 375] नई दिल्ली, बृहस्ट्प जतिार, िनू 26, 2025/ाषाढ़ 5, 1947
No. 375] NEW DELHI, THURSDAY, JUNE 26, 2025/ASHADHA 5, 1947
जित्त मत्रं ालय
(रािस्ट्ि जिभाग)
अजधसचू ना
नई दिल्ली, 26 िून, 2025
स.ं 21/2025-सीमा िल्ु क (एडीडी)
सा.का.जन. 418(अ).— िबदक चीन िनिािी गणराज्य और ताइिान (एतजममन पम चात जिन्ह ें जिषयगत िेिों स े
संिर्भित दकया गया ह)ै म ें मूलत: उत् पादित या िहा ं से जनयाजि तत और भारत म ें ायाजतत ‘प् लाजस्ट् क प्रेसेंसंग मिीन’,
(एतजममन पम चात जिसे जिषयगत िस्ट्त ु स े संिर्भित दकया गया ह)ै िे दक सीमािुल् क ैिर अजधजनयम, 1975
(1975 का 51) (एतजममन पम चात जिसे सीमािुल्क ैिर अजधजनयम से संिर्भित दकया गया ह)ै कप प्र म अनुसूची कप ैिर
मि 8477 10 00 अ िा 8477 90 00 के अंतगित ाता ह,ै के मामल े में जिजनर्िष्ि प्राजधकारी अपने अंजतम जनष्कषषों म ें
अजधसूचना संख् या 06/09/2024-डीिी ीार, दिनांक 27 माच,ि 2025, जिसे भारत के रािपत्र, असाधारण, भाग I, खंड 1
में दिनांक 27 माच,ि 2025 के प्रकाजित दकया गया ा, के सा पिित िुजिपत्र , जिसे दिनांक 26 िून, 2025 के प्रकाजित
दकया गया ा , म ें अन्य बातों के अलािा इस जनष्कषि पर पहचं े ह ैं दक –
(i) जिषयगत िस्ट्तुओं के जिषयगत िेि से भारत म ें पाि त मूल्य पर जनयाित दकया गया ह;ै
4206 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
(ii) घरेलू उद्येग के जिषयगत िेिों से जिषयगत ायातों के कारण सारिान क्षजत हई ह ै;
(iii) जिषयगत ििे से जिषयगत िस्ट्तु के डंप दकए गए ायात के कारण सारिान क्षजत हई है,
और घरेल ूउद्येग के हई इस क्षजत के िरू करन ेके जलए जिषयगत ििे म ेंमलू त: उत् पादित या िहां से जनयािजतत और
भारत में ायाजतत जिषयगत िस्ट् तुओं के ायात पर प्रजतपा न िुल् क लगाए िाने कप जस ािरि कप ह;ै
अतः अब सीमा िुल्क ैिर (पाि त िस्ट्तुओं कप पहचान, उनका ांकलन त ा उन पर प्रजतपा न िुल्क का संग्रहण
और क्षजत जनधािरण) जनयमािली, 1995 के जनयम 18 और 20 के सा पिित सीमा िुल्क ैिर अजधजनयम कप धारा 9क कप
उप-धारा (1) और (5) द्वारा प्रित्त िजियों का प्रयेग करत े हए केन् र सरकार, जिजनर्िष्ि प्राजधकारी के उपयुि् त अंजतम
जनष्क षषों पर जिचार करन े के पमच ात, एतद्द्वारा, जिषयगत िस्ट् तओंु पर, जिनका जििरण नीचे िी गई सारणी के कॉलम (3) म ें
जिजनर्िष्ि है, िे दक सीमा िुल् क ैिर अजधजनयम कप प्र म अनुसूची कप उस ैिर मि के अंतगति ाती ह:ै िे दक नीच े
कॉलम (2) कप तत्स ंबंधी प्रजिजि में जिजनर्िष्ि ह,ै िे कॉलम (4) कप तत्स ंबंधी प्रजिजि में जिजनर्िष्ि िेि में मूलत: उत् पादित
ह,ै िे कॉलम (5) कप तत्स ंबंधी प्रजिजि में जिजनर्िष्ि िेिों से जनयािजतत ह,ै और कॉलम (6) कप तत्स ंबंधी प्रजिजि में जिजनर्िष्ि
जनमािताओं द्वारा जनर्मित ह ैऔर भारत में ायाजतत ह,ै पर उि सारणी के कॉलम (7) कप तत्सबं ंधी प्रजिजि में य ा जिजनर्ििि
िर से प्रजतपा न िुल् क लगाती ह,ै य ा –
सारणी
सीआईएफ
क्र. िीषि/ उप िस्ट्तओंु का मलू ता का जनयाति का
उत्पािक के % के रूप
स.ं िीष ि जििरण ििे ििे
म ेंशल्ु क
(1) (2) (3) (4) (5) (6) (7)
प्लास्टिक डोंगगुआन फू चुन स्शन प्लास्टिक
84771000 चीन िन. गण.
प्रोसेससिंग चीन जन. मशीनरी स्नमाणा किं, स्लस्मिेड और फू चुन
1. और सस्ित कोई भी 48%
मशीनरी गण. स्शन (सनिंगबो) मशीनरी स्नमाणा किं,
84779000 दशे
स्लस्मिेड
चेन ह्सोंग मशीनरी किंपनी स्लस्मिेड,
चेन ह्सोंग सेल्स एिंड माकेटििंग (शेन्जेन)
किंपनी स्लस्मिेड, चेन ह्सोंग मशीनरी
चीन िन. गण.
चीन जन. (सनिंगबो) किंपनी स्लस्मिेड, चेन ह्सोंग
2. -िही- -िही- सस्ित कोई भी 27%
गण. मशीनरी (शेन्जेन) किंपनी स्लस्मिेड,
दशे
फोशान शुिंड े चेन डे प्रेस्सजन मशीनरी
किंपनी स्लस्मिेड, फोशान शुिंड े चेन डे
प्लास्टिक मशीनरी किंपनी स्लस्मिेड
स्िज़ुमी प्रेस्सजन मोसल्डिंग िेक्नोलॉजी किं,
चीन िन. गण. स्लस्मिेड, स्िज़ुमी िाई टपीड पैकेसजिंग
चीन जन.
3. -िही- -िही- सस्ित कोई भी िेक्नोलॉजी किं, स्लस्मिेड, स्िज़ुमी प्रेस्सजन 35%
गण.
दशे मशीनरी (एचके) किं, स्लस्मिेड, स्िज़ुमी
प्रेस्सजन मशीनरी (सूज़ौ) किं, स्लस्मिेड
चीन िन. गण.
चीन िन. िटकी इिंजेक्शन मोसल्डिंग स्सटिम्स शिंघाई
4. -िही- -िही- सस्ित कोई भी 0%
गण. स्लस्मिेड
दशे[भाग II—खण् ड 3(i)] भारत का रािपत्र : असाधारण 3
क्रम संख्या 1,2,3 और 4 में उजल्लजखत
चीन िन. गण.
चीन िन. उत्पािकों के अलािा अन्य केई भी
5. -िही- -िही- सस्ित कोई भी 63%
गण. उत्पािक
दशे
चीन िन.
गण. एव िं
ताइवान के
6. -िही- -िही- चीन िन. गण. कोई भी उत्पादक 63%
अलावा
कोई भी
अन्ि दशे
ताइवान ताइवान सस्ित चेन ह्सोंग मशीनरी ताइवान किं,
7. -िही- -िही- 39%
कोई भी दशे स्लस्मिेड
ताइवान ताइवान सस्ित
8. -िही- -िही- हुओवंग मशीनरी स्लस्मिेड . 0%
कोई भी दशे
क्रम संख्या 7 और 8 में उजल्लजखत
ताइवान सस्ित उत्पािकों के अलािा अन्य केई भी
9. -िही- -िही- ताइवान 53%
उत्पािक
कोई भी दशे
चीन िन.
गण. एव िं
ताइवान के
10. -िही- -िही- ताइवान कोई भी उत्पादक 53%
अलावा
कोई भी
अन्ि दशे
ने 1 : वतामान जािंच म ेंस्वचाराधीन उत्पाद प्लास्टिक प्रसिंटकरण मशीन ें (पीपीएम) िा इिंजेक्शन मोसल्डिंग मशीनें ि,ैं
स्जन्ि ें इिंजेक्शन प्रेसर के रूप में भी जाना जाता ि,ै स्जनका उपिोग प्लास्टिक सामग्री के प्रसिंटकरण और मोसल्डिंग के स्लए
ककिा जाता ि।ै
ने 2 : स्वचाराधीन उत्पाद के दािरे म ेंसभी प्रकार की प्लास्टिक प्रोसेससिंग िा इिंजेक्शन मोसल्डिंग मशीनें शास्मल ि,ैं
स्जनका क्लैसम्पिंग बल 40 िन स े कम और 1500 िन स े अस्धक निीं ि।ै स्वचाराधीन उत्पाद के दािरे म ें पूरी तरि से
असेंबल की गई, सेमी नॉक्ड डाउन (एसकेडी), कम्पलीि नॉक्ड डाउन फॉमा (सीकेडी) िा एसकेडी और सीकेडी का सिंिोजन
शास्मल ि।ै दािरे को नीच े और टपष्ट ककिा गिा ि ै-
क. सेमी नॉक डाउन टिेज म ें प्लास्टिक प्रोसेससिंग मशीन का मतलब ऐसी प्लास्टिक प्रोसेससिंग मशीन िोगी जो पूरी तरि
स ेअसेंबल निीं की गई ि,ै लेककन इस ेप्लास्टिक प्रोसेससिंग मशीन के रूप म ेंइटतेमाल ककिा जाता ि,ै स्जसम ेंपार्टसा िा
सब-असेंबली एक साथ कफि निीं िोती ि ैंऔर मशीन इटतेमाल के स्लए तैिार निीं िोती ि।ै सेमी नॉक डाउन मशीन
म ेंसब-असेंबली भी शास्मल िोगी जैसे क्लैसम्पिंग/क्लैंप िूस्नि, टरू और बैरल के साथ िा स्बना इिंजेक्शन िूस्नि, मशीन
बेस फ्रेम और इिंजेक्शन मोसल्डिंग मशीन के स्लए आिास्तत फैस्िकेशन फ्रेम/कवर।4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
ख. पूणातिा नष्ट अवटथा में प्लास्टिक प्रसिंटकरण मशीन का अथ ा अपूण ा िा अधूरा प्लास्टिक प्रसिंटकरण मशीन ि,ै जो एक
साथ रखे जाने पर पूण ामशीन का अस्नवाि ाचररत्र रखती ि,ै तथा स्जसमें मशीनों को सिंिोस्जत करन ेके स्लए आवश्िक
सभी घिक िोते ि।ैं
ने 3 : स्नम्नस्लस्खत उत्पादों को स्वशेष रूप स े स्वचाराधीन उत्पाद के दािरे स ेबािर रखा गिा ि:ै -
क. उपशीषाक 8477 30 00 के अिंतगात सीमा शुल्क िैररफ अस्धस्निम, 1975 के अिंतगात वगीकृत ब्लो मोसल्डिंग मशीनें।
ख. ऊर्धवााधर इिंजेक्शन मोसल्डिंग मशीनें.
ग. सभी इलेस्क्िक इिंजेक्शन मोसल्डिंग मशीनें, स्जनम ें िािंस्त्रक गस्तस्वस्धिािं जैसे इिंजेक्शन, मोसल्डिंग बिंद करना, मोसल्डिंग
खोलना, इजेक्शन, टरू-ड्राइव आकद टवतिंत्र सवो मोिसा द्वारा स्नििंस्त्रत िोती ि ैंऔर स्डस्जिल स्नििंत्रण प्रणाली िोती
ि ैतथा िाइड्रोस्लक इकाई के स्बना िोती ि।ैं
घ. फुिस्विर बनान ेके स्लए बहु-रिंगीन/बहु-मोल्ड मशीनरी, फुिस्विर बनाने के स्लए रोिरी इिंजेक्शन मोसल्डिंग मशीनरी
और फुिस्विर सोल/टिैप/एडी इिंजेक्शन मोसल्डिंग मशीन, जो कक सीमा शुल्क िैररफ अस्धस्निम, 1975 के उप-शीषाक
8453 के अिंतगता वगीकृत ि।ै
ङ. सेकेंड िडैं /प्रिुक्त प्लास्टिक प्रसिंटकरण मशीनें।
च. ऊपर स्नर्दष्टा भागों/घिकों के अलावा ककसी भी टिैंडअलोन भाग/घिक का आिात।
छ. इिंजेक्शन मोसल्डिंग मशीनों के अलावा ककसी अन्ि मशीन के उत्पादन के स्लए आिास्तत क्लैसम्पिंग/क्लैम्प इकाई, टरू
और बैरल सस्ित िा रस्ित इिंजेक्शन इकाई, मशीन बेस फ्रेम और फैस्िकेशन फ्रेम/कवर का आिात।
ने 4 : सीमा शुल्क वगीकरण केवल सािंकेस्तक ि ैतथा स्वचाराधीन उत्पाद के दािरे पर बार्धिकारी निीं ि।ै
2. इस अजधसूचना के अंतगित लगाया गया प्रजतपा न िुल्क इस अजधसूचना के रािकपय रािपत्र म ेंप्रकािन कप तारीख
से पांच िषि कप अिजध (यदि इसके पहले इसके िापस नहीं जलया िाता ह,ै इसका अजधक्रमण नहीं दकया िाता ह ै या इसमें
संिेधन नहीं हेता ह ैते) के जलए लगाया िाएगा और यह भारतीय मुरा म ेंिेय हेगा।
स्ट्पिीकरण – इस अजधसूचना के प्रयेिनों हते ,ु
(क) ऐसे प्रजतपा न िुल्क, कप गणना के प्रयेिनों हते ु लागू जिजनमय िर िही िर हेगी िे दक भारत सरकार, जित्त
मंत्रालय (रािस्ट्ि जिभाग) कप अजधसूचना, जिसे सीमा िुल्क अजधजनयम, 1962 (1962 का 52) कप धारा 14 द्वारा
प्रित्त िजियों का प्रयेग करत े हए समय-समय पर िारी दकया गया ह,ै म ें जिजनर्ििि कप गई ह ै और इस जिजनमय
िर के जनधािरण कप संगत तारीख िह तारीख हेगी िे दक उि सीमा िल्ु क अजधजनयम कप धारा 46 के अंतगति
ागम पत्र के प्रस्ट्तुजतकरण कप तारीख हेगी ।
(ख) "सीाईए मूल्य" का तात्पयि सीमा िुल्क अजधजनयम, 1962 (1962 का 52) कप धारा 14 के तहत जनधाििरत
मूल्यांकन येग्य मल्ू य स ेह।ै
[ ा. सं. 190354/52/2025- ीारयू]
धीरि िमाि, अिर सजचि[भाग II—खण् ड 3(i)] भारत का रािपत्र : असाधारण 5
MINISTRY OF FINANCE
(Department of Revenue)
NOTIFICATION
New Delhi, the 26th June, 2025
No. 21/2025-Customs (ADD)
G.S.R. 418(E).— Whereas in the matter of “Plastic Processing Machines” (hereinafter referred to as the subject
goods) falling under tariff items 8477 10 00 or 8477 90 00 of the First Schedule to the Customs Tariff Act, 1975 (51 of
1975) (hereinafter referred to as the Customs Tariff Act), originating in, or exported from China PR and Taiwan
(hereinafter referred to as the subject countries), and imported into India, the designated authority in its final findings
vide notification No. 06/09/2024-DGTR, dated the 27th March, 2025, published in the Gazette of India, Extraordinary,
Part I, Section 1, dated the 27th March, 2025, read with corrigendum dated 26th June, 2025, has, inter alia come to the
conclusion that—
(i) the subject goods have been exported to India from the subject countries at dumped prices;
(ii) the domestic industry has suffered material injury on account of dumped imports from subject countries;
(iii) the material injury has been caused to the domestic industry by the dumped imports of subject goods from
the subject countries,
and has recommended imposition of an anti-dumping duty on the imports of subject goods, originating in, or exported
from the subject countries and imported into India, in order to remove injury to the domestic industry.
Now, therefore, in exercise of the powers conferred by sub-sections (1) and (5) of section 9A of the Customs
Tariff Act read with rules 18 and 20 of the Customs Tariff (Identification, Assessment and Collection of Anti-dumping
Duty on Dumped Articles and for Determination of Injury) Rules, 1995, the Central Government, after considering the
aforesaid final findings of the designated authority, hereby imposes on the subject goods, the description of which is
specified in column (3) of the Table below, falling under tariff items of the First Schedule to the Customs Tariff Act as
specified in the corresponding entry in column (2), originating in the countries as specified in the corresponding entry
in column (4), exported from the countries as specified in the corresponding entry in column (5), produced by the
producers as specified in the corresponding entry in column (6), and imported into India, an anti-dumping duty
calculated at the rate as specified in the corresponding entry in column (7) of the said Table, namely:-
TABLE
S. Tariff Items Description Country of Country of Duty as
No. of the goods origin export % of
Producer
CIF
value
(1) (2) (3) (4) (5) (6) (7)
1. 8477 10 00 Plastic China PR Any Dongguan Fu Chun Shin Plastic Machinery 48%
or Processing country Manufacture Co., Ltd. and Fu Chun Shin
8477 90 00 Machinery including (Ningbo) Machinery Manufacture Co., Ltd
China PR
2. -do- -do- China PR Any Chen Hsong Machinery Co Ltd, Chen Hsong 27%
country Sales & Marketing (Shenzhen) Co., Ltd, Chen
including Hsong Machinery (Ningbo) Co., Ltd., Chen
China PR
Hsong Machinery (Shenzhen) Co., Ltd,
Foshan Shunde Chen De Precision Machinery
Co., Ltd., Foshan Shunde Chen De Plastics
Machinery Co., Ltd
3. -do- -do- China PR Any Yizumi Precision Molding Technology Co., 35%
country Ltd., Yizumi High Speed Packaging
including Technology Co., Ltd, Yizumi Precision
China PR
Machinery (HK) Co., Limited, Yizumi
Precision Machinery (Suzhou) Co., Ltd
4. -do- -do- China PR Any Husky Injection Molding Systems Shanghai 0%
country Ltd
including
China PR
5. -do- -do- China PR Any Any producer other than producers mentioned at 63%
country S No. 1,2,3 and 4 above
including
China PR
6. -do- -do- Any country China PR Any producer 63%
other than
China PR and
Taiwan
7. -do- -do- Taiwan Any Chen Hsong Machinery Taiwan Co., Ltd. 39%
country
including
Taiwan6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)]
8. -do- -do- Taiwan Any Huarong Plastic Machinery Co., Ltd 0%
country
including
Taiwan
9. -do- -do- Taiwan Any Any producer other than producers mentioned 53%
country at S No. 7 and 8 above
including
Taiwan
10. -do- -do- Any country Taiwan Any producer 53%
other than
China PR and
Taiwan
Note 1: The product under consideration in the present investigation is Plastic Processing Machines (PPM) or Injection
Moulding Machines, also known as injection presser, used for processing and moulding of plastic materials.
Note 2 : The scope of the product under consideration includes all kinds of plastic processing or injection moulding
machines, having a clamping force not less than 40 tonnes and not more than 1500 tonnes. The scope of the product
under consideration includes machines in fully assembled, semi knocked down (SKD), complete knocked down form
(CKD), or a combination of SKD & CKD. The scope is further clarified below –
a. A plastic processing machine in semi knocked down stage shall mean a plastic processing machine which is not
fully assembled but is transacted as a plastic processing machine with parts or sub-assemblies not fitted together
and the machine is not ready to use. A semi knockdown machine shall also imply sub-assemblies namely
clamping/clamp unit, injection unit with or without screw & barrel, machine base frame and fabrication
frames/covers imported for injection moulding machine.
b. A plastic processing machine in completely knocked down stage shall mean a plastic processing machine in its
incomplete or unfinished form, has the essential character of the complete machine when put together, and
contains all components required for assembling the machines.
Note 3 : The following products are specifically excluded from the scope of the product under consideration: -
a. Blow moulding machines classified under tariff item 8477 30 00 under the Customs Tariff Act, 1975;
b. Vertical injection moulding machines;
c. All electric injection moulding machines wherein the mechanical movements such as injection, moulding
closing, moulding opening, ejection, screw-drive etc. are controlled by independent servo motors and having
digital control system and without hydraulic unit;
d. Multi-colour/multi-mould machinery for making footwear, rotary injection moulding machinery for making
footwear and footwear sole/strap/heel injection moulding machine classified under the Custom Tariff Act, 1975
under sub heading 8453;
e. Second hand/used plastic processing machines;
f. Imports of any standalone parts/components, other than those specified above;
g. Imports of clamping/clamp unit, injection unit with or without screw & barrel, machine base frame and
fabrication frames/covers imported for production of a machine other than injection moulding machines;
Note 4: The customs classification is indicative only and not binding on the scope of the product under consideration.
2. The anti-dumping duty imposed under this notification shall be levied for a period of five years (unless revoked,
superseded or amended earlier) from the date of publication of this notification in the Official Gazette, and shall be
payable in Indian currency.
Explanation. – For the purposes of this notification,
(a) rate of exchange applicable for the purposes of calculation of such anti-dumping duty shall be the rate which is
specified in the notification of the Government of India, in the Ministry of Finance (Department of Revenue),
issued from time to time, in exercise of the powers conferred by section 14 of the Customs Act, 1962 (52 of 1962),
and the relevant date for the determination of the rate of exchange shall be the date of presentation of the bill of
entry under section 46 of the said Act.
(b) "CIF value" means assessable value as determined under section 14 of the Customs Act, 1962 (52 of 1962).
[F. No. 190354/52/2025-TRU]
DHEERAJ SHARMA, Under Secy.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.