Executive Summary:
This order, titled the Cookware, Utensils and Cans for Foods and Beverages Quality Control Order, 2025, mandates compliance with specified Indian Standards and the use of the Standard Mark for these goods. It is issued by the Department for Promotion of Industry and Internal Trade, superseding the 2024 order with certain exceptions. The order comes into force upon publication in the Official Gazette, with varying implementation dates for different enterprises.
Key Points / Main Content:
* **Scope and Applicability:**
* The order applies to goods specified in the table, requiring them to conform to the corresponding Indian Standard and bear the Standard Mark under a license from the Bureau of Indian Standards (BIS).
* Exemptions include goods manufactured domestically for export, and certain goods made by micro and small enterprises, as well as those manufactured by enterprises with limited investment and turnover, those filled with materials when imported, and those imported for research and development.
* **Compliance and Enforcement:**
* The Bureau of Indian Standards is the certifying and enforcing authority.
* Contravention of the order is punishable under the Bureau of Indian Standards Act, 2016.
* **Implementation Dates:**
* General implementation for Cookware, Utensils and Cans for foods is October 1, 2025.
* Implementation for small enterprises is January 1, 2026.
* Implementation for micro enterprises is April 1, 2026.
* **Standards:**
* Applicable standards include IS 14756:2024, IS 1660:2024, IS 13983:1994, IS 18427:2024 and IS 14407:2023 and the latest version of Indian Standards including amendments.
Impact Analysis:
* Manufacturers of Cookware, Utensils, and Cans for Foods and Beverages:
* Impact: Must comply with the specified Indian Standards and obtain a license to use the Standard Mark, except where exemptions apply.
* Action Required: Ensure products meet the required standards, obtain necessary certifications from BIS, and adhere to implementation timelines.
* Micro and Small Enterprises:
* Impact: Subject to delayed implementation timelines for compliance.
* Action Required: Comply with standards by the specified dates, which are January 1, 2026, for small enterprises and April 1, 2026, for micro enterprises.
* Importers:
* Impact: Imported goods must comply with the order, except for goods filled with material, those imported for R&D purposes (limited to 200 articles), and those already imported before the implementation date (with a declaration and a six-month sell-off period).
* Action Required: Ensure imported products meet the required standards and obtain necessary certifications, except where exemptions apply. Declare existing stock imported before the implementation date.
* Bureau of Indian Standards (BIS):
* Impact: Responsible for certification and enforcement of the order.
* Action Required: Provide certification services, monitor compliance, and take action against contraventions of the order.
* Central Government:
* Impact: Oversees the implementation and enforcement of the order.
* Action Required: Monitor the effectiveness of the order and make necessary adjustments as needed.
Key Entities Referenced
Bureau of Indian Standards: A national standards body of India responsible for the formulation and implementation of standards.
Bureau of Indian Standards Act, 2016: An act of the Indian Parliament that established the Bureau of Indian Standards and defines its powers and functions.
Ministry of Commerce and Industry: A ministry of the Government of India responsible for the formulation and implementation of policies related to commerce, industry, and trade.
Department for Promotion of Industry and Internal Trade: A department under the Ministry of Commerce and Industry, Government of India, responsible for promotion of industry and internal trade.
Cookware, Utensils and Cans for Foods and Beverages Quality Control Order, 2025: A quality control order issued by the Central Government of India pertaining to cookware, utensils and cans for foods and beverages.
New Delhi: The capital of India, where the order was issued.
Micro, Small and Medium Enterprises Development Act, 2006: An act of the Indian Parliament that provides for the facilitation and promotion of micro, small and medium enterprises.
Udyam portal: A portal of the Ministry of Micro, Small and Medium Enterprises for registration of enterprises.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-23082025-265652
CG-DxLx-xEG-I2D3H0x8x2x0 25-265652
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग II—खण् ड 3—उप-खण्ड (ii)
PART II—Section 3—Sub-section (ii)
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 3745] नई ददल्ली, िुक्रवार, अगस्ट्त 22, 2025/श्रावण 31, 1947
No. 3745] NEW DELHI, FRIDAY, AUGUST 22, 2025/SHRAVANA 31, 1947
वाजणज्य और उद्योग मत्रं ालय
(उद्योग सवं धनध और आतं ररक व्यापार जवभाग)
आदेि
नई ददल्ली, 21 अगस्ट्त, 2025
का. आ. 3850अ).—भारतीय मानक ब्यूरो अजधजनयम, 2016 (2016 का 11) की धारा 17 ओर धारा 25 की
उप-धारा (3) के साथ परित धारा 16 द्वारा प्रदत्त िजियों का प्रयोग करते हुए और खाद्य और पेय पदाथों के जलए बतनध
और जडब्बे, और इसी प्रकार के कुकवेयर (गणु वत्ता जनयंत्रण) आदेि, 2024 के अजधक्रमण में, जसवाय ऐसे कायों के िो
अजधक्रमण स े पहले दकए गए अथवा जिन्ह ें दकए िान े से छोड़ ददया गया, केन्र सरकार का, भारतीय मानक ब्यरू ो स े
परामि ध करन े के बाद यह मत ह ैदक यह िनजहत म ेंआवश्यक अथवा जहतकर है, अत: एतद्द्वारा जनम्नजलजखत आदेि करती ह,ै
नामत:-
1. सजं िप्त िीर्कध , और प्रारंभ.- (1) इस आदेि को खाद्य और पेय पदाथों के जलए बतधन और जडब्बे, और इसी प्रकार के
कुकवेयर (गुणवत्ता जनयंत्रण) आदेि, 2025 कहा िाएगा।
(2) यह आदिे रािपत्र में प्रकािन की जतजथ से लाग ूहोगा।
2. मानक जिह्न का अजनवाय ध प्रयोग- ताजलका के कॉलम (2) में जवजनर्दधष्ट वस्ट्तुएं या सामान ताजलका के कॉलम (3) म ें
जवजनर्दधष् ट भारतीय मानक संबंधी तदनुरूपी प्रजवजष्ट के अनरूु प होंग े तथा उन पर भारतीय मानक ब्यूरो (अनरूु पता
मूल्यांकन) जवजनयम, 2018 की अनुसूिी-II की स्ट्कीम-I के अनसु ार ब्यूरो के लाइसेंस के तहत मानक जिह्न लगा होगा।
5606 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
बिते यह भी दक इस आदेि म ेंसे कुछ भी जनयाधत की िान े वाली स्ट्वदेि म ें जवजनर्मधत वस्ट्तुओं या सामानों पर लाग ू
नहीं होगा:
बिते यह भी दक सूक्ष्म, लघु और मध्यम उद्यम जवकास अजधजनयम, 2006 (2006 का 27) के तहत पररभाजर्त
लघ ु उद्यम और सूक्ष्म उद्यम क्रमिः ताजलका के कॉलम (6) और (7) म ें जवजनर्दधष्ट सगं त प्रजवजष्ट में जवजनर्दधष्ट जतजथ स े ऐस े
भारतीय मानकों का अनुपालन करेंग;े
बिते यह भी दक इस आदेि में स े कुछ भी सूक्ष्म, लघ ु और मध्यम उद्यम मंत्रालय के उद्यम पोटधल के अंतगतध
पंिीकृत दकसी उद्यम द्वारा घरेल ू स्ट्तर पर जवजनर्मधत वस्ट्तओंु या सामानों पर लाग ू नहीं होगा, जिसमें संयंत्र और मिीनरी
या उपकरण में मलू लागत पर जनवेि पच्चीस लाख रुपए से अजधक नहीं ह ै और िाटधड ध अकाउंटेंट द्वारा प्रमाजणत दकए गए
अनुसार जपछले जवत्त वर्ध का टनधओवर दो करोड़ रुपए स ेअजधक नहीं ह:ै
बिते दक इस आदेि म ें से कुछ भी, ब्यूरो द्वारा प्रमाजणत जवजनमाधता या प्रमाणन के जलए ब्यरू ो को आवेदन करन े
वाले जवजनमाधता या सुसंगत वस्ट्तुओं और सामानों के जलए आयातक द्वारा इस आदेि की ताजलका में जनर्दधष्ट कायाधन्वयन की
जतजथ से पहल े घरेल ू रूप स े जवजनर्मधत या आयाजतत वस्ट्तुओं या सामानों पर लाग ू नहीं होगी, और ऐसे जवजनमाधता या
आयातक को इस आदिे की ताजलका में जवजनर्दधष्ट कायाधन्वयन की जतजथ से छह माह तक ऐसे घोजर्त स्ट्टॉक को बेिने या
प्रदर्िधत करन े या उसे जिक्री हते ु पेि करन े की अनुमजत होगी, बिते दक ऐसा जवजनमाधता या आयातक िाटधड ध अकाउंटेंट द्वारा
ब्यूरो के समि इस आिय की घोर्णा करे:
बिते यह भी दक इस आदिे म ें से कुछ भी भारत में आयात दकए िात े समय िोस, रव या गसै , दकसी भी रूप म ें
सामग्री से भरे माल या वस्ट्तओंु पर लाग ूनहीं होगी:
बिते यह भी दक इस आदिे म ें से कुछ भी खाद्य और पेय पदाथों के जलए बतधन और जडब्बे, और इसी प्रकार के
कुकवेयर जवजनमाधताओं द्वारा अनुसंधान और जवकास के उद्देश्य स े प्रजत वर् ध आयाजतत दो सौ वस्ट्तुओं या सामानों के जलए
लाग ू नहीं होगा, इस ित ध के साथ दक ऐसी आयाजतत वस्ट्तुए ं और सामानों की वाजणजज्यक रूप से जबक्री नहीं की िाएगी और
उन्ह ें स्ट्क्रैप के रूप में जनपटाया िा सकता ह ै और जवजनमाधता वस्ट्तुओं या सामानों का वर्धवार ररकॉडध रखेंगे और उसे केंर
सरकार के समि प्रस्ट्ततु करेंगे।
ताजलका
क्रम वस्ट्तएु ं या भारतीय भारतीय मानक का सामान्यतः लघ ुउद्यमों के सक्ष्ू म उद्यमों
स.ं सामान मानक िीर्कध कायान्ध वयन की जलए के जलए
तारीख (सक्ष्ू म एव ं कायान्ध वयन की कायान्ध वयन
लघ ुउद्यमों को तारीख की तारीख
छोड़कर)
(1) (2) (3) (4) (5) (6) (7)
1. खाद्य और पेय 14756:2024 स्ट्टेनलेस स्ट्टील से बन े
पदाथों के जलए बतधन
2. बतधन और 1660:2024 गढ े (रॉट)
जडब्बे, एल्यूमीजनयम स े बन े 1 अिूबर, 2025 1 िनवरी, 1 अप्रलै ,
कुकवेयर बतधन 2026 2026
3. 13983:1994 घरेलू प्रयोिनों के
जलए स्ट्टेनलेस स्ट्टील के
ससंक
4. 18427:2024 खाद्य और पेय पदाथों
के जलए तीन पीस
वाले गोल खुल े टॉप के
धातु के जडब्बे
5. 14407:2023 पेय पदाथों के जलए
एल्यूमीजनयम के जडब्बे[भाग II—खण् ड 3(ii)] भारत का रािपत्र : असाधारण 3
रटप्पणी : इस ताजलका के प्रयोिनों के जलए ब्यूरो द्वारा समय-समय पर अजधसूजित संिोधनों सजहत भारतीय मानकों का
नवीनतम संस्ट्करण लाग ूहोगा।
3. प्रमाणन और प्रवतनध प्राजधकरण – उक्त ब् यरू ो ताजलका के कॉलम (2) में जवजनर्दधष् ट वस्ट् तुओं या सामान के जलए
प्रमाणन और प्रवतधन प्राजधकरण होगा।
4. उल्ल घं न के जलए पने ल्ट ी– इस आदेि के प्रावधानों का उल्ल घं न करन े वाले व् यजि को भारतीय मानक ब् यूरो
अजधजनयम, 2016 के प्रावधानों के तहत दंजडत दकया िाएगा।
[फा. स.ं पी-29026/14/2023-एलईआई]
संिीव, संयुक्त सजिव
MINISTRY OF COMMERCE AND INDUSTRY
(Department for Promotion of Industry and Internal Trade)
ORDER
New Delhi, the 21st August, 2025
S.O. 3850(E).—In exercise of the powers conferred by section 16 read with section 17 and sub-section (3) of
section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016) and in supersession of the Cookware, Utensils
and Cans for foods and beverages (Quality Control) Order 2024, except as respects things done or omitted to be done
before such supersession, the Central Government, after consulting the Bureau of Indian Standards, is of the opinion
that it is necessary or expedient so to do in the public interest, hereby makes the following order, namely:-
1. Short title and commencement. – (1) This Order may be called the Cookware, Utensils and Cans for Foods and
Beverages (Quality Control) Order, 2025.
(2) It shall come into force on the date of its publication in the official Gazette.
2. Compulsory use of Standard Mark.- Goods or articles specified in column (2) of the Table shall conform to the
corresponding Indian Standard specified in column (3) of the Table and shall bear the Standard Mark under a license
from the Bureau as per Scheme-1 of Schedule-II of the Bureau of Indian Standards (Conformity Assessment)
Regulations, 2018:
Provided that nothing in this order shall apply to goods or articles manufactured domestically for export:
Provided further that the micro enterprise and small enterprise, as defined under the Micro, Small and
Medium Enterprises Development Act, 2006 (27 of 2006) shall conform to such Indian Standards from the date
specified in the corresponding entry under columns (6) and (7) of the Table respectively:
Provided also that nothing in this order shall apply to goods or articles manufactured domestically by an
enterprise, registered under Udyam portal of the Ministry of Micro, Small and Medium Enterprises, wherein the
investment in plant and machinery or equipment at original cost does not exceed twenty-five lakh rupees and the
turnover does not exceed two crore rupees for the previous financial year as certified by a Chartered Accountant:
Provided also that nothing in this order shall apply to goods or articles domestically manufactured or
imported before the date of implementation specified in the Table of this order by the manufacturer certified by the
Bureau or manufacturer who has applied to the Bureau for certification or by the importer for the relevant goods and
articles and such manufacturer or importer shall be permitted to sell or display or offer to sell such declared stock up
to six months from the date of implementation specified in the Table of this Order, subject to the condition that such
manufacturer or importer shall make a declaration to this effect certified by a Chartered account to the Bureau:
Provided also that nothing in this order shall apply to goods or articles filled with material in any form solid,
liquid or gas, when imported into India:
Provided also that nothing in this order shall apply for two hundred numbers of goods or articles imported
for the purpose of research and development by manufacturers of Cookware, Utensils and Cans for Food and
Beverages per year with the condition that such imported goods and articles shall not be sold commercially and shall
be disposed of as a scrap and the manufacturer shall maintain a year-wise record of such goods and articles and
furnish to the Central Government.4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
TABLE
S.No. Goods or Indian Title of Indian Date of Date of Date of
articles Standard Standard implementation in implementation implementation
general (other than for small for micro
micro and small enterprises enterprises
enterprises)
(1) (2) (3) (4) (5) (6) (7)
1. Cookware, 14756:2024 Stainless Steel
Utensils and Utensils
Cans for foods
2. 1660:2024 Wrought
and beverages 1st 1st 1st
Aluminium
October, 2025 January, 2026 April, 2026
Utensils
3. 13983:1994 Stainless Steel
Sinks for
Domestic
Purposes
4. 18427:2024 Three piece round
open top metal
cans for foods
and bevrages
5. 14407:2023 Aluminium cans
for beverages
Note.—For the purposes of this Table, the latest version of Indian Standards including the amendments thereof, as
notified by the Bureau of Indian Standards from time to time shall apply.
3. Certification and enforcement authority.—The Bureau shall be the certifying and enforcing authority for the
goods or articles specified in column (2) of the Table.
4. Penalty for contravention.— Any person who contravenes the provisions of this Order shall be punishable under
the provisions of the Bureau of Indian Standards Act, 2016.
[F. No. P-29026/14/2023-LEI]
SANJIV, Joint Secy.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.