## Report on Amendment to Antidumping Investigation Concerning Plastic Processing Machines
**1. Executive Summary:**
This report analyzes a *corrigendum* notification issued by the Directorate General of Trade Remedies (DGTR), Department of Commerce, Ministry of Commerce and Industry, Government of India, concerning an antidumping investigation on imports of Plastic Processing Machines (PPM) from China PR and Taiwan. This amendment modifies the duty table established in a prior investigation. The key change involves substituting the existing duty table with a revised one, specifying the antidumping duties applicable to various producers from China PR and Taiwan. This report outlines the changes, affected parties, and likely impact of this amendment.
**2. Introduction:**
The purpose of this report is to provide an informative analysis of the corrigendum notification issued by the Directorate General of Trade Remedies (DGTR) regarding the antidumping investigation on Plastic Processing Machines originating in or exported from China PR and Taiwan. This analysis is based solely on the provided policy text.
**3. Policy Overview:**
* This document is an *amendment* to an existing antidumping investigation, referenced as Case No. ADD O.I. 082024.
* **Core Objective (Inferred):** To revise the antidumping duty rates applicable to specific producers of Plastic Processing Machines from China PR and Taiwan, ensuring fair trade practices by addressing potential dumping.
**4. Background and Rationale:**
This document is a *corrigendum*, implying that there was an error or omission in the previously established duty table (referred to in paragraph 186) relating to the antidumping investigation. The amendment likely aims to correct these inaccuracies, ensuring that the appropriate duties are levied on different producers from China PR and Taiwan. The reference to the Customs Tariff Act, 1975, and the Anti-Dumping Rules of 1995, suggests the need to align the duty table with these regulations.
**5. Key Provisions / Changes:**
* **Specific Part of Original Policy Changed:** The duty table in paragraph 186 of the original policy is being substituted.
* **New Rule/Provision:** The document presents a new *Duty Table* (as seen in the policy text) specifying the "Country of Origin", "Country of Export", "Producer", and "Duty" for specific Plastic Processing Machine producers from China PR and Taiwan. The table is structured with the following columns: SN (Serial Number), Heading/Subheading of the goods (84771000 & 84779000), Description (Plastic and processing machinery including machinery), Country of Origin, Country of Export, Producer, and Duty. Specific duty amounts (48, 27, 35, 0, 63, 39, 0, 53) are assigned to different manufacturers depending on their origin.
* **Difference/Effect of Change:** The amendment provides an updated and potentially more accurate list of antidumping duties for specific producers. This change affects the cost of importing Plastic Processing Machines from these manufacturers into India.
**6. Target Audience and Stakeholders:**
The primary target audience and stakeholders affected by this amendment include:
* Importers of Plastic Processing Machines into India.
* Manufacturers of Plastic Processing Machines in China PR and Taiwan, specifically those named in the duty table, such as:
* Dongguan Fu Chun Shin Plastic Machinery Manufacture Co., Ltd.
* Fu Chun Shin Ningbo Machinery China Manufacture Co., Ltd
* Chen Hsong Machinery Co Ltd
* Yizumi Precision Molding Technology Co., Ltd.
* Husky Injection Molding Systems Shanghai Ltd
* Chen Hsong Machinery Taiwan Co., Ltd.
* Huarong Plastic Machinery Co., Ltd.
* Domestic producers of Plastic Processing Machines in India.
* Customs authorities responsible for collecting duties.
**7. Implementation Aspects (Inferred):**
* **Responsible Agency/Bodies:** The Directorate General of Trade Remedies (DGTR), Department of Commerce, and Ministry of Commerce and Industry are responsible for implementing and enforcing these changes. The Customs authorities are responsible for collecting the revised duties.
* **Timelines/Procedures:** While the document does not specify a timeline for implementation, it is reasonable to assume that the changes are effective immediately upon notification (June 26, 2025). Importers will be required to pay the new duty rates as per the revised duty table.
**8. Expected Outcomes / Impact of Changes:**
The likely intended outcome of this amendment is:
* More accurate and targeted application of antidumping duties on Plastic Processing Machines from China PR and Taiwan.
* Reduced risk of unfair trade practices related to the import of these machines.
* Potentially increased competitiveness for domestic manufacturers of Plastic Processing Machines in India.
* The imposition of duties could increase the price of imported PPMs, potentially affecting the profitability of industries reliant on these machines in India.
**9. Conclusion:**
The corrigendum notification represents an important amendment to the existing antidumping investigation concerning Plastic Processing Machines from China PR and Taiwan. By substituting the duty table, the DGTR aims to ensure fair trade practices and protect domestic industries from potential dumping. This change directly affects importers and manufacturers of these machines and is likely to impact the cost of importing PPMs into India.
Key Entities Referenced
NEW DELHI: Place of publication of the gazette.
Customs Tariff Act, 1975: An act referred to in the context of antidumping duty determination.
Customs Tariff Identification, Assessment and Collection of Antidumping Duty on Dumped Articles and for Determination of Injury Rules, 1995: Rules referred to as 'AntiDumping Rules' or 'the Rules' related to antidumping duty.
MINISTRY OF COMMERCE AND INDUSTRY: The ministry under which the Department of Commerce falls.
Department of Commerce: The department issuing the notification.
DIRECTORATE GENERAL OF TRADE REMEDIES: The organization responsible for trade remedies, issuing the corrigendum notification.
China PR: Country of origin or export of the plastic processing machines under investigation.
Taiwan: Country of origin or export of the plastic processing machines under investigation.
Plastic Processing Machines: Product under antidumping investigation.
Dongguan Fu Chun Shin Plastic Machinery Manufacture Co., Ltd.: Producer from China PR
Fu Chun Shin Ningbo Machinery China Manufacture Co., Ltd: Producer from China PR
Chen Hsong Machinery Co Ltd: Producer from China PR
Chen Hsong Sales Marketing Shenzhen Co., Ltd: Producer from China PR
Chen Hsong Machinery Ningbo Co., Ltd.: Producer from China PR
Chen Hsong Machinery Shenzhen Co., Ltd: Producer from China PR
Foshan Shunde Chen De Precision Machinery Co., Ltd.: Producer from China PR
Foshan Shunde Chen De Plastics Machinery Co., Ltd: Producer from China PR
Yizumi Precision Molding Technology Co., Ltd.: Producer from China PR
Yizumi High Speed Packaging Technology Co., Ltd: Producer from China PR
Yizumi Precision Machinery HK Co., Limited: Producer from China PR
Yizumi Precision Machinery Suzhou Co., Ltd: Producer from China PR
Husky Injection Molding Systems Shanghai Ltd: Producer from China PR
Chen Hsong Machinery Taiwan Co., Ltd.: Producer from Taiwan
Huarong Plastic Machinery Co., Ltd: Producer from Taiwan
Siddharth Mahajan: Designated Authority
Government of India Press, Ring Road, Mayapuri, New Delhi: Place where document was printed
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-26062025-264168
xxxGIDHxxx
CG-DL-E-26062025-264168
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग I—खण् ड 1
PART I—Section 1
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 179] िई ददल्ली, बृहस्ट्प जतवार, ििू 26, 2025/आषाढ़ 5, 1947
No. 179] NEW DELHI, THURSDAY, JUNE 26, 2025/ASHADHA 5, 1947
वाजणज्य और उद्योग मत्रं ालय
(वाजणज्य जवभाग)
(व्य ापार उपचार महाजिदेिालय)
िजु ि-पत्र अजधसचू िा
िई ददल्ली, 26 िूि, 2025
मामला स.ं एडीडी (ओआई) 08/2024
जवषय: चीि िि. गण. और ताइवाि के मलू की अथवा वहा ं स ेजियाजा तत 'प्लाजस्ट्िक प्रोससे सगं मिीि' के आयातों के सबं धं म ें
पाििरोधी िाचं ।
फा. स.ं 6/09/2024-डीिीिीआर.—समय-समय पर यथासंिोजधत सीमा िल्ु क िैररफ अजधजियम, 1975
(जिसे इसके बाद स े "अजधजियम" के रुप म ें कहा गया ह)ै और समय-समय पर यथासंिोजधत तत्स बंधी सीमा िल्ु क िैररफ
(पारित वस्ट् तओं पु पर पाििरोधी िुल्क की पहचाि, आकलि और सग्रं हण तथा क्षजत का जिधाारण) जियमावली, 1995
(जिसे इसके बाद से "पाििरोधी जियमावली" अथवा "जियम" कहा गया ह)ै को ध्याि में रखते हुए, पैरा 186 की िुल्क
ताजलका को जिम्ि जलजखत अिुसार प्रजतस्ट्थाजपत दकया िाता ह।ै
4209 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SEC.1]
िल्ु क ताजलका
क्र. िीष/ा वस्ट्त ओं पु मलू ता का जियाता का दिे उत्प ादक सीआईएफ के
स.ं उप िीष ा का दिे % के रुप म ें
जववरण
िल्ु क
(1) (2) (3) (4) (5) (6) (7)
1 84771000 प्ल ाजस्ट्िक चीि िि. चीि िि. गण. डोंगगुआि फू चुि जिि प्लाजस्ट्िक मिीिरी 48%
और प्रोसेससंग गण. सजहत कोई भी जिमााण कं, जलजमिेड और फू चुि जिि (सिंगबो)
84779000 मिीिरी* दिे मिीिरी मैन् युफै चर कं, जलजमिेड
2 - वही - - वही - चीि िि. चीि िि. गण. चेि ह्सोंग मिीिरी कंपिी जलजमिेड, चेि 27%
गण. सजहत कोई भी ह्सोंग सेल्स एंड माकेटिंग (िेन्जेि) कंपिी
दिे जलजमिेड, चेि ह्सोंग मिीिरी (सिगं बो) कंपिी
जलजमिेड, चेि ह्सोंग मिीिरी (िन्े जेि) कंपिी
जलजमिेड, फोिाि िुंडे चेि डे प्रेजसिि मिीिरी
कंपिी जलजमिेड, फोिाि िुंडे चेि डे प्लाजस्ट्िक
मिीिरी कंपिी जलजमिेड
3 - वही - - वही - चीि िि. चीि िि. गण. जयज़ुमी प्रेजसिि मोसल्डंग िेक्नोलॉिी कं, 35%
गण. सजहत कोई भी जलजमिेड, जयज़ुमी हाई स्ट्पीड पैकेसिंग
दिे
िेक्नोलॉिी कं, जलजमिेड, जयज़ुमी प्रेजसिि
मिीिरी (एचके) कं, जलजमिेड, जयज़ुमी प्रेजसिि
मिीिरी (सूज़ौ) कं, जलजमिेड
4 - वही - - वही - चीि िि. चीि िि. गण. हस्ट्की इंिेिि मोसल्डंग जसस्ट्िम्स िंघाई 0%
जलजमिेड
गण. सजहत कोई भी
दिे
5 - वही - - वही - चीि िि. चीि िि. गण. उपरोक्त क्रम सं. 1, 2, 3 और 4 में उजल्लजखत 63%
गण. सजहत कोई भी उत्पादक के अलावा कोई भी उत्पादक
दिे
6 - वही - - वही - चीि िि. चीि िि. गण. कोई भी उत् पादक 63%
गण. और
ताइवाि
के अलावा
कोई भी
दिे
7 - वही - - वही - ताइवाि ताइवाि सजहत चेि ह्सोंग मिीिरी ताइवाि कं, जलजमिेड 39%
कोई भी दिे
8 - वही - - वही - ताइवाि ताइवाि सजहत हुआरोंग प्लाजस्ट्िक मिीिरी कं, जलजमिेड 0%
कोई भी दिे
9 - वही - - वही - ताइवाि ताइवाि सजहत उपरोक्त क्रम सं. 7 और 8 में उजल्लजखत 53%
कोई भी दिे
उत्पादक के अलावा कोई भी उत्पादक
10 - वही - - वही - चीि िि. ताइवाि कोई भी उत् पादक 53%
गण. और
ताइवाि
के अलावा
कोई भी
दिे[भाग I—खण् ड 1] भारत का रािपत्र : असाधारण 3
* वतामाि िांच में जवचाराधीि उत्पाद के रुप में प्लाजस्ट्िक प्रोसेससंग मिीि (पीपीएम) अथवा इंिेिि मोसल्डंग मिीि हैं,
जिन्ह ेंइंिेिि प्रेसर के रूप म ेंभी िािा िाता ह,ै जििका उपयोग प्लाजस्ट्िक सामग्री की प्रोसेससंग और मोसल्डंग के जलए दकया
िाता ह।ै
जवचाराधीि उत्पाद के दायरे म ेंसभी प्रकार की ऐसी प्लाजस्ट्िक प्रोसेससंग अथवा इंिेिि मोसल्डंग मिीिें िाजमल हैं, जििम ें
लैसम्पंग फोसा 40 िि स ेकम और 1500 िि से अजधक िहीं ह।ै जवचाराधीि उत्पाद के दायरे में परूी तरह से असेंबल, सेमी
िॉड डाउि (एसकेडी), पूरी तरह स ेिॉड डाउि फॉम ा(सीकेडी), अथवा एसकेडी और सीकेडी के संयोिि म ेंमिीि ेंिाजमल
ह।ैं इस दायरे को िीचे और भी स्ट्पष्ट दकया गया ह ै-
क. सेमी िॉड डाउि अवस्ट्था में प्लाजस्ट्िक प्रोसेससंग मिीि से तात् पया एक ऐसी प्लाजस्ट्िक प्रोसेससंग मिीि से ह ैिो
पूरी तरह से असेंबल िहीं की गई ह,ै लेदकि एक प्लाजस्ट्िक प्रोसेससंग मिीि के रूप म ेंसंचाजलत की िाती ह,ै जिसमें
पुिे अथवा सब-असेंबली एक साथ दफि िहीं होते ह ैंऔर मिीि उपयोग के जलए तैयार िहीं होती ह।ै सेमी िॉक
डाउि मिीि म ेंसब-असेंबली भी िाजमल होगी िैसे लैसम्पंग/ लैंप यूजिि, स्ट्क्रू और बैरल के साथ और इिके जबिा
इंिेिि यूजिि, मिीि बेस फ्रेम और इंिेिि मोसल्डंग मिीि के जलए आयाजतत फैजिकेिि फ्रेम/ कवर।
ख. पूरी तरह से िॉक डाउि अवस्ट्था में प्लाजस्ट्िक प्रोसेसंग मिीि से तात् पया अपूणा अथवा अधरूी प्लाजस्ट्िक प्रोसेससंग
मिीि स ेह,ै जिसे एक साथ रखे िाि ेपर उसम ेंपरूी मिीि का अजिवाया गणु होता है, और जिसम ेंमिीिों को
असेंबल करिे के जलए अपेजक्षत सभी घिक होते हैं।
जिम्नजलजखत उत्पादों को जविेष रूप से जवचाराधीि उत्पाद के दायरे से बाहर रखा गया ह:ै -
क. उप िीषा 8477 30 00 के अंतगात, सीमा िुल्क अजधजियम, 1975 के तहत वगीकृत ब्लो मोसल्डंग मिीिें।
ख. वर्िाकल इंिेिि मोसल्डंग मिीिें।
ग. सभी इलेजरक इंिेिि मोसल्डंग मिीिें जििमें इंिेिि, मोसल्डंग लोसिंग, मोसल्डंग ओपसिंग, इिेिि, स्ट्क्रू-
ड्राइव आदद िैसे मैकेजिकल मूवमेंि स्ट्वतंत्र सवो मोिसा द्वारा जियंजत्रत होते ह ैंऔर जडजििल जियंत्रण प्रणाली के होत े
ह ैंऔर हाइड्रोजलक यूजिि के जबिा होते ह।ैं
घ. फुिजवयर जिमााण के जलए मल्िी-कलर/ मल्िी-मोल्ड मिीिरी, फुिजवयर जिमााण के जलए रोिरी इंिेिि मोसल्डंग
मिीिरी और फुिजवयर सोल/ स्ट्रैप/ हील इंिेिि मोसल्डंग मिीि िो उप िीष ा8453 के अतंगता सीमा िुल्क
अजधजियम, 1975 के अंतगात वगीकृत ह।ैं
ड. सेकेंड हडैं/ प्रयक्तु प्लाजस्ट्िक प्रोसेससंग मिीिें।
च. ऊपर जिर्दष्टा के अलावा दकसी भी स्ट्िैंडअलोि पार्टसा/ घिकों का आयात।
छ. इंिेिि मोसल्डंग मिीिों के अलावा दकसी अन्य मिीि के उत्पादि के जलए आयाजतत लैसम्पगं/ लैम्प इकाई, स्ट्क्रू
और बैरल सजहत अथवा रजहत इंिेिि यूजिि, मिीि बेस फ्रेम और फैजिकेिि फ्रेम/ कवर का आयात।
#सीमा िुल्क वगीकरण केवल सांकेजतक ह ैऔर जवचाराधीि उत्पाद के दायरे पर बाध्यकारी िहीं ह।ै
जसिाथा महािि, जिर्दष्ा ि प्राजधकारी4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART I—SEC.1]
MINISTRY OF COMMERCE AND INDUSTRY
(Department of Commerce)
(DIRECTORATE GENERAL OF TRADE REMEDIES)
CORRIGENDUM NOTIFICATION
New Delhi, the 26th June, 2025
Case No. ADD (O.I.) 08/2024
Subject: Anti-dumping investigation concerning imports of ‘Plastic Processing Machines’ originating in or
exported from China PR and Taiwan.
F. No. 6/09/2024-DGTR.—Having regard to the Customs Tariff Act, 1975, as amended from time to time
(hereinafter referred to as "the Act") and the Customs Tariff (Identification, Assessment and Collection of Anti-dumping
Duty on Dumped Articles and for Determination of Injury) Rules, 1995, as amended from time to time (hereinafter
referred as the "Anti-Dumping Rules" or "the Rules") thereof, the duty table of para 186 is substituted as below.
DUTY TABLE
SN Heading/ Description Country of Country
Duty as %
subheading of the origin of export Producer
of CIF
goods
(1) (2) (3) (4) (5) (6) (7)
1 84771000 Plastic China PR Any Dongguan Fu Chun Shin Plastic 48%
and processing country Machinery Manufacture Co., Ltd. and Fu
84779000 machinery* including Chun Shin (Ningbo) Machinery
China Manufacture Co., Ltd
PR
2 -do- -do- China PR Any Chen Hsong Machinery Co Ltd, Chen 27%
country Hsong Sales & Marketing (Shenzhen)
including Co., Ltd, Chen Hsong Machinery
China (Ningbo) Co., Ltd., Chen Hsong
PR Machinery (Shenzhen) Co., Ltd, Foshan
Shunde Chen De Precision Machinery
Co., Ltd., Foshan Shunde Chen De
Plastics Machinery Co., Ltd
3 -do- -do- China PR Any Yizumi Precision Molding Technology 35%
country Co., Ltd., Yizumi High Speed Packaging
including Technology Co., Ltd, Yizumi Precision
China Machinery (HK) Co., Limited, Yizumi
PR Precision Machinery (Suzhou) Co., Ltd
4 -do- -do- China PR Any Husky Injection Molding Systems 0%
country Shanghai Ltd
including
China
PR
5 -do- -do- China PR Any Any producer other than producer 63%
country mentioned at SN 1, 2, 3 and 4 above
including
China
PR
6 -do- -do- Any China Any producer 63%
country PR
other than
China PR
and
Taiwan
7 -do- -do- Taiwan Any Chen Hsong Machinery Taiwan Co., Ltd. 39%
country[भाग I—खण् ड 1] भारत का रािपत्र : असाधारण 5
including
Taiwan
8 -do- -do- Taiwan Any Huarong Plastic Machinery Co., Ltd 0%
country
including
Taiwan
9 -do- -do- Taiwan Any Any producer other than producer 53%
country mentioned at SN 7 and 8 above
including
Taiwan
10 -do- -do- Any Taiwan Any producer 53%
country
other than
China PR
and
Taiwan
* The product under consideration in the present investigation is Plastic processing machines (PPM) or Injection
Moulding Machines, also known as injection presser, used for processing and moulding of plastic materials.
The scope of the product under consideration includes all kinds of plastic processing or injection moulding machines,
having a clamping force not less than 40 tonnes and not more than 1500 tonnes. The scope of the product under
consideration includes machines in fully assembled, semi knocked down (SKD), complete knocked down form (CKD),
or a combination of SKD & CKD. The scope is further clarified below –
a. A plastic processing machine in semi knocked down stage shall mean a plastic processing machine which is not
fully assembled but is transacted as a plastic processing machine with parts or sub-assemblies not fitted together
and the machine is not ready to use. A semi knockdown machine shall also imply sub-assemblies namely
clamping/clamp unit, injection unit with or without screw & barrel, machine base frame and fabrication
frames/covers imported for injection moulding machine.
b. A plastic processing machine in completely knocked down stage shall mean a plastic processing machine in its
incomplete or unfinished form, has the essential character of the complete machine when put together, and
contains all components required for assembling the machines
The following products are specifically excluded from the scope of the product under consideration: -
a. Blow moulding machines classified under Custom Tariff Act, 1975 under subheading. 8477 30 00.
b. Vertical injection moulding machines.
c. All electric injection moulding machines wherein the mechanical movements such as injection, moulding closing,
moulding opening, ejection, screw-drive etc. are controlled by independent servo motors and having digital
control system and without hydraulic unit.
d. Multi-colour/multi-mould machinery for making footwear, rotary injection moulding machinery for making
footwear and footwear sole/strap/heel injection moulding machine classified under the Custom Tariff Act, 1975
under sub heading 8453.
e. Second hand/used plastic processing machines.
f. Imports of any standalone parts/components, other than those specified above.
g. Imports of clamping/clamp unit, injection unit with or without screw & barrel, machine base frame and
fabrication frames/covers imported for production of a machine other than injection moulding machines.
#The customs classification is indicative only and not binding on the scope of the product under consideration.
SIDDHARTH MAHAJAN, Designated Authority
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.