Home India Ministry of Environment, Forest and Climate Change DRAFT RULES. These rules shall be called the Plastic Waste M...
Date: 2015-05-26 Category: Extra Ordinary State: Union Government Country: India

DRAFT RULES. These rules shall be called the Plastic Waste Management Rules, 2015.

Issued by Ministry of Environment, Forest and Climate Change · Climate Change Division

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

Executive Summary: This document outlines the Plastic Waste Management Rules, 2015, superseding the 2011 rules, to improve the management of plastic waste. It emphasizes waste minimization, source segregation, recycling, and the involvement of waste pickers and recyclers. Key actions include producers establishing waste collection systems within six months and discontinuing multilayered packaging within three years. The rules came into effect on the 25th of May, 2015. Key Points / Main Content: * **Applicability:** * Applies to every waste generator, urban local body, Gram Panchayat, manufacturer, and producer. * Rule 4 does not apply to export-oriented units or units in special economic zones, except those packaging gutkha, tobacco, and pan masala. * **Conditions for Manufacture, Stocking, Distribution, Sale and Use of Plastics:** * Carry bags must be colorless or use pigments conforming to IS 9833:1981. * Recycled plastic cannot be used for foodstuff packaging. * Carry bags must be at least 50 microns thick. * Plastic sheets must be at least 50 microns thick if not part of multilayered packaging. * Manufacturers must only supply plastic to registered producers. * Sachets using plastic are prohibited for gutkha, tobacco, and pan masala. * Recycled carry bags must conform to IS 14534:1998. * Compostable plastic carry bags must conform to ISISO 17088:2008. * Plastic material is banned in any package for packaging gutkha, pan masala and tobacco in all forms. * **Plastic Waste Management Responsibilities:** * Urban local bodies must develop infrastructure for waste segregation, collection, storage, transportation, processing, and disposal. * Gram Panchayats must establish waste management systems in rural areas. * Waste generators must minimize waste generation, segregate waste at source, and handover segregated waste to waste pickers, registered recyclers, or waste collection agencies. * **Producer Responsibilities:** * Establish waste collection systems based on Extended Producers Responsibility (EPR) within six months. * Stop using multilayered packaging and switch to recyclable or compostable plastics within three years. * Apply for registration with the Pollution Control Board within three months. * Maintain records of plastic suppliers. * **Protocols and Standards:** * Compostable plastic materials must adhere to Indian Standards listed in Schedule I. * **Marking or Labelling Requirements:** * Carry bags and multilayered packaging must be labeled with the manufacturer's name and registration number. * Recycled carry bags must bear a "recycled" mark and conform to IS 14534:1998. * Compostable carry bags must bear a "compostable" label and conform to ISISO 17088:2008. * **Enforcement and Registration:** * State Pollution Control Boards and Pollution Control Committees are the authority for enforcement and registration. * Producers, recyclers, and manufacturers must obtain registration. * Retailers and street vendors should not use carry bags or plastic sheets not manufactured and labelled or marked as per the rules. * **Explicit Pricing of Carry Bags:** * Retailers should not give carry bags free of cost. * The urban local body determines the price of carry bags. * The urban local body determines the manner of depositing with it the payment made by the customers to the retailers for carry bags. * **Reporting:** * Recyclers and processors must submit annual reports in Form IV to the urban local body. * Urban local bodies must submit annual reports in Form V to the Secretary in charge of the Urban Development Department. * State Pollution Control Boards must submit annual reports to the Central Pollution Control Board. * Central Pollution Control Board shall prepare a consolidated annual report. Impact Analysis: * **Urban Local Bodies and Gram Panchayats** * *Impact:* Responsible for developing and implementing plastic waste management infrastructure and systems. * *Action Required:* Establish infrastructure for segregation, collection, storage, transportation, processing, and disposal of plastic waste. Create awareness among stakeholders and ensure no open burning of plastic waste occurs. They shall set up the system for plastic waste within one year from the date of final publication of these rules. * **Manufacturers and Producers:** * *Impact:* Subject to restrictions on the type and thickness of plastic they can produce and use. They will need to obtain registration and establish waste collection systems. * *Action Required:* Apply for registration, work out modalities for waste collection, stop use of multilayered packaging, and maintain records of plastic suppliers. Producers, within a period of three years from the date of final publication of these rules, shall stop use of multilayered packaging and switch over to use of plastic which is recyclable or compostable, for packaging commodity. * **Waste Generators (Including Institutions and Event Organizers):** * *Impact:* Required to minimize plastic waste generation and segregate waste at the source. * *Action Required:* Segregate plastic waste, handover segregated waste to waste pickers, registered recyclers, or waste collection agencies. * **Retailers and Street Vendors** * *Impact:* They will need to only use labelled carry bags and plastic sheets. They will also need to sell carry bags and fine consumers who do not comply with standards. * *Action Required:* They should only sell or provide commodities to consumer in carry bags or plastic sheets or multilayered packaging, which are manufactured and labelled or marked, as per prescribed under these rules. Every retailers or street vendors selling or providing commodities in plastic carry bags or multilayered packaging or plastic sheets or like or covers made of plastic sheets which are not manufactured or labelled or marked in accordance with these rules shall be liable to pay such fines as specified under the byelaws of the urban local bodies. * **State Pollution Control Boards and Pollution Control Committees:** * *Impact:* Responsible for enforcement, registration, and monitoring of compliance. * *Action Required:* Process registration applications, conduct inquiries, and grant registrations to qualified applicants.

Key Entities Referenced

Plastic Waste Management Rules, 2015: The name of the proposed rules which are the subject of the notification. Environment Protection Act, 1986: The Act of the Indian Parliament that empowers the Central Government to make rules for environmental protection. Plastic Waste Management Handling Rules, 2011: The rules that are being superseded by the new Plastic Waste Management Rules, 2015. Ministry of Environment, Forest and Climate Change: The Indian government ministry responsible for environmental regulation and policy. Central Pollution Control Board: The central pollution control board is responsible for processing and disposal of plastic State Pollution Control Board: State Pollution Control Board is responsible for registration, manufacture of plastic products and multilayered packaging, processing and disposal of plastic wastes. Water Prevention and Control of Pollution Act, 1974: Act for prevention and control of water pollution Air Prevention and Control of Pollution Act, 1981: Act for prevention and control of air pollution
Official Source Record View Original Source →
See Full Document Text
jftLVªh laö Mhö ,yö&33004@99 REGD. NO. D. L.-33004/99 vlk/kj.k EXTRAORDINARY Hkkx II—[k.M 3—mi&[k.M (i) PART II—Section 3—Sub-section (i) izkf/dkj ls izdkf'kr PUBLISHED BY AUTHORITY la- 335] ubZ fnYyh] eaxyokj] ebZ 26] 2015@T;s"B 5]1937 No. 335] NEW DELHI, TUESDAY, MAY 26, 2015/JYAISTHA 5, 1937 पपपपययययाााावव(cid:4)(cid:4)वव(cid:4)(cid:4) ररररणणणण,,,, ववववनननन औऔऔऔरररर जजजजललललववववाााायययय ुु ुुपपपप(cid:8)(cid:8)(cid:8)(cid:8)ररररववववततततनन(cid:4)(cid:4)नन(cid:4)(cid:4) मममम(cid:13)(cid:13)ंं(cid:13)(cid:13)ंं ााााललललयययय अअअअििििधधधधससससचचूूचचूू ननननाााा नई (cid:1)द(cid:3)ली, 25 मई, 2015 ससससाााा....ककककाााा....ििििनननन.... 444422223333((((अअअअ))))....—के(cid:8)(cid:9)ीय सरकार, भारत सरकार के पया(cid:13)वरण और वन मं(cid:19)ालय के पूव (cid:13) सं. का.आ. 249(अ) तारीख 4 फरवरी, 2011 क(cid:21) अिधसूचना (cid:22)ारा (cid:23)लाि(cid:25)टक अपिश(cid:29) (cid:30)बंध !व(cid:25)था को सुधारने के उ$े%य से (cid:23)लाि(cid:25)टक कैरी बैग के िविनमा(cid:13)ण और उपयोग को िनब’िधत करने और नगरपािलका (cid:30)ािधकरण) (cid:22)ारा (cid:23)लाि(cid:25)टक अपिश(cid:29) (cid:30)बंध !व(cid:25)था (cid:25)थािपत करने के िलए (cid:23)लाि(cid:25)टक अपिश(cid:29) ((cid:30)बंध और (cid:30)ह(cid:25)तन) िनयम, 2011 िवरिचत क(cid:21) थी ; और (cid:1)+या(cid:8)वयन के मू(cid:3)यांकन से यह पता चला है (cid:1)क िविभ- कारण) से िविहत (cid:30)ािधका.रय) (cid:22)ारा वांिछत प.रणाम (cid:30)ा/ नह0 1ए ह 3और साव(cid:13)जिनक (cid:25)वा(cid:25)6य और पया(cid:13)वरण क(cid:21) सुर8ा के िलए इन िनयम) पर (cid:1)फर से िवचार करने क(cid:21) आव%यकता महसूस क(cid:21) गई ; और घरेलू या (cid:1)कसी अ(cid:8)य ;ोत स ेइसके उ=पादन या म>यवत? साम@ी पुन:(cid:30)ाि/ सुिवधा से पलाि(cid:25)टक अपिश(cid:29) भाग के सं@हण म A (cid:23)लाि(cid:25)टक अपिश(cid:29) (cid:8)यूनीकरण, ;ोत पृथB करण, पुन:च+(cid:21)करण, अपिश(cid:29) चुनने वाल), पुन:च+णकता(cid:13)E और अपिश(cid:29) (cid:30)सं(cid:25)करणकता(cid:13)E और अपिश(cid:29) (cid:30)बंध !व(cid:25)था क(cid:21) सधं ाय(cid:13)ता के िलए (cid:30)दषू णकता(cid:13) भुगतान िसGांत को अंगीकार करने पर जोर दने े क(cid:21) आव%यकता है ; अत:, अब के(cid:8)(cid:9)ीय सरकार कितपय िनयम) का िनHन िलिखत (cid:30)ाIप, पया(cid:13)वरण (संर8ण) अिधिनयम, 1986 (1986 का 29) क(cid:21) धारा 3, धारा 6 और धारा 25 (cid:22)ारा (cid:30)दJ शिKय) का (cid:30)योग करते 1ए और अपिशष्ट (cid:23)लाि(cid:25)टक ((cid:30)बंध और (cid:30)ह(cid:25)तन) िनयम, 2011 के अिध+मण म Aउसके िसवाए िजसे ऐसे अिध+मण के पूव(cid:13) अपेि8त बाते क(cid:21) गM ह3 या (cid:1)कए जाने का िवरोध (cid:1)कया गया ह,ै (cid:30)(cid:25)तािवत करती है और rn~}kjk आम जनता क(cid:21) जानकारी के िलए (cid:30)कािशत क(cid:21) जाती ह ैिजससे उन लोग) के (cid:30)भािवत होने क(cid:21) संभावना ह;ै और ये सूचना दी जाती ह ै (cid:1)क उK (cid:30)ाIप िनयम उस तारीख से िजसको भारत के राजप(cid:19) म A यथा (cid:30)कािशत इस अिधसूचना क(cid:21) (cid:30)ितया ं आम जनता को उपलNध करा दी गई ह,3 साठ (cid:1)दन) क(cid:21) अविध क(cid:21) समाि/ को या उसके पOात ्िवचार म Aिलया जाएगा; (cid:30)ाIप िनयम) के आ8ेप या सुझाव, य(cid:1)द कोई ह,3 सिचव, पया(cid:13)वरण और वन तथा जलवायु प.रवत(cid:13)न मं(cid:19)ालय, इि(cid:8)दरा पया(cid:13)वरण भवन, जोरबाग रोड, नई (cid:1)द(cid:3)ली-110003 को या इलैBSािनक Iप स े मं(cid:19)ालय क(cid:21) ई-मेल पता @ bnsinha@gov.in, e.thirun@nic.in; पर इस (cid:30)कार िनTद(cid:29) अविध के भीतर संबोिधत (cid:1)कया जाए; ऐसे आ8ेप और सुझाव जो इस (cid:30)कार िविनTद(cid:29) अविध क(cid:21) समाि/ के पूव(cid:13) उK (cid:30)ाIप िनयम) क(cid:21) बाबत (cid:1)कसी !िK से (cid:30)ा/ ह)गे, पर के(cid:8)(cid:9)ीय सरकार (cid:22)ारा िवचार (cid:1)कया जाएगा । 2335 GI/2015 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (cid:15)(cid:15)(cid:15)(cid:15)ाााा(cid:16)(cid:16)(cid:16)(cid:16)पपपप ििििननननययययमममम 1. ससससििंंििंं(cid:19)(cid:19)(cid:19)(cid:19)(cid:20)(cid:20)(cid:20)(cid:20) ननननाााामममम औऔऔऔरररर (cid:15)(cid:15)(cid:15)(cid:15)ाााारररर(cid:21)(cid:21)(cid:21)(cid:21)भभभभ :- 1. इन िनयम) का संि8/ नाम अपिश(cid:29) (cid:23)लाि(cid:25)टक (cid:30)बंध िनयम, 2015 ह ै। 2. इन िनयम) म Aउपबंध के िसवाए वे राजप(cid:19) म Aअपने अंितम (cid:30)काशन क(cid:21) तारीख से (cid:30)वृJ ह)गे । 2. ललललाााागगगग ूू ूूहहहहोोोोननननाााा 1. ये िनयम (cid:30)=येक अपिश(cid:29) उ=पादक, शहरी (cid:25)थानीय िनकाय, @ाम पंचायत िविनमात(cid:13) ा और उ=पादक को लागू ह)गे । 2. िनयम 4 के(cid:8)(cid:9)ीय सरकार (cid:22)ारा अिधसूिचत िनया(cid:13)त के आदशे के िलए अपने उ=पाद के िविनमाण(cid:13) के िलए िनयात(cid:13) ो(cid:8)मुख इकाइय) या िवशषे आWथक जोन क(cid:21) ईकाइय) पर लागू नह0 होगा: पर(cid:8)तु यह छूट गुटका, तHबाकू और पान मसाला के पैकेYजग म A लगी ईकाइय) और (cid:1)कसी अिधशेष या िनराकृत, अवशेष और इसी (cid:30)कार के अ(cid:8)य उ=पाद) पर भी लागू नह0 होगी । 3. पपपप(cid:8)(cid:8)(cid:8)(cid:8)ररररभभभभााााषषषषााााएएएए ंंंं इन िनयम) म Aजब तक (cid:1)क संदभ(cid:13) से अ(cid:8)यथा अपेि8त न हो; (क) “अअअअििििधधधधििििननननययययमममम’’ से पया(cid:13)वरण (सरं 8ण) अिधिनयम, 1986 (1986 का 29) अिभ(cid:30)ेत ह ै; (ख) “ककककैैैैररररीीीी बबबबैगैगैगैग’’ से (cid:23)लाि(cid:25)टक साम@ी से बनाया गया, ले जाने या व(cid:25)तुएं तैयार करने के (cid:30)योजन के िलए (cid:30)युK बैग अिभ(cid:30)ेत है (cid:1)क(cid:8)त ु इसम A ऐसा बैग सिHमिलत नह0 है जो ऐसी पैकेYजग ग.ठत करता है या अिभ- भाग बनता ह ै िजसम A माल को उपयोग के पूव(cid:13) सील (cid:1)कया जाता है ; (ग) “वववव(cid:25)(cid:25)(cid:25)(cid:25)तततत ुु ुुसससस’ेेेे’ ऐसा मूत (cid:13)मद अिभ(cid:30)ेत ह ैिजस ेखरीदा या बेचा जा सके और इसम Aसभी प[य माल या सौदा सिHमिलत है ; (घ) “ककककंंंंपपपपोोोो(cid:25)(cid:25)(cid:25)(cid:25)टटटट ययययोोोो(cid:30)(cid:30)(cid:30)(cid:30)यययय (cid:31)(cid:31)(cid:31)(cid:31)ललललाााािििि(cid:25)(cid:25)(cid:25)(cid:25)टटटटकककक’’ से ऐसी (cid:23)लाि(cid:25)टक अिभ(cid:30)ेत है जो जैिवक(cid:21)य (cid:30)(cid:1)+याE (cid:22)ारा िवघटनीय होने के दौरान काब(cid:13)न-डाई- आBसाइड, जल, अकाब(cid:13)िनक यौिगक) को कंपो(cid:25)ट करती ह ैऔर अ(cid:8)य ^ात कंपो(cid:25)ट यो_य सामि@य) के साथ जैव भार क(cid:21) समIप दर है और जो द%ृ य, िवशेषणीय या िवषाK अपिश(cid:29) नह0 छोड़ती है; (ञ) “ससससहहहहममममिििितततत’’ स े जल ((cid:30)दषू ण िनवारण तथा िनयं(cid:19)ण) अिधिनयम, 1974 (1974 का 6) और वायु ((cid:30)दषू ण िनवारण तथा िनयं(cid:19)ण) अिधिनयम, 1981 (1981 का 14) के अधीन संबG रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) या (cid:30)दषू ण िनयं(cid:19)ण सिमित से (cid:25)थािपत करने क(cid:21) सहमित और उसे चलाने क(cid:21) सहमित अिभ(cid:30)ेत ह;ै (च) “ििििववववघघघघटटटटनननन’’ से (cid:1)कसी साम@ी का ब1त छोटे भाग) म Aभौितक Iप) म Aभंजन अिभ(cid:30)ेत ह3; (छ) “ििििवववव(cid:25)(cid:25)(cid:25)(cid:25)तततताााा(cid:8)(cid:8)(cid:8)(cid:8)ररररतततत उउउउ!!!!पपपपााााददददकककक ददददाााािििियययय!!!!वववव ((((ईईईईपपपपीीीीआआआआरररर))))’’ से इसके जीवन तक उ=पाद के पया(cid:13)वण?य Iप से सुदढ़ृ (cid:30)बंध के िलए उ=पादक का दािय=व अिभ(cid:30)ेत ह ै (ज) “खखखखाााा$$$$ पपपपददददााााथथथथ’(cid:4)(cid:4)(cid:4)(cid:4)’ से (cid:9)व, चूण,(cid:13) ठोस या अध (cid:13)ठोस Iप म Aखान ेके िलए तैयार खा‘ पदाथ,(cid:13) फा(cid:25)ट फूड, (cid:30)सं(cid:25)कृत या पकाए 1ए खादय् पदाथ (cid:13) अिभ(cid:30)ेत ह 3; ((((झझझझ)))) “ससससििुुििुुववववधधधधाााा’’ से (cid:23)लाि(cid:25)टक अपिश(cid:29) के पुन:च+(cid:21)करण, (cid:30)सं(cid:25)करण और िनपटान के िलए उपयोग (cid:1)कए जान ेवाला प.रसर अिभ(cid:30)ेत है ; (ञ) “सससस(cid:25)(cid:25)ंं(cid:25)(cid:25)ंं थथथथाााागगगगतततत जजजजििििनननन(cid:13)(cid:13)(cid:13)(cid:13)’’ से के(cid:8)(cid:9)ीय सरकारी िवभाग, रा_य सरकारी िवभाग, पिN(cid:3)क या (cid:30)ाइवेट सैBटर कंपिनया, अ(cid:25)पताल, (cid:25)कूल, महािव‘ालय, िवaिव‘ालय या िश8ा के अ(cid:8)य (cid:25)थल, संगठन, अकादमी, होटल या रे(cid:25)तरा ं (cid:22)ारा अिधकृत भवन जैसे सं(cid:25)थागत भवन) का अिधभोगी अिभ(cid:30)ेत ह ैऔर सिHमिलत ह ै;¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 3 ((((टटटट)))) “ििििववववििििननननममममाााातत(cid:4)(cid:4)तत(cid:4)(cid:4) ाााा’’ से उ=पादक (cid:22)ारा कb ची साम@ी के Iप म A (cid:30)युK (cid:1)कए जाने वाले (cid:23)लाि(cid:25)टक के उ=पादन म A लगा !िK या इकाई या अिभकरण अिभ(cid:30)ेत ह ैऔर सिHमिलत ह;ै (ठ) “बबबब))))(cid:25)(cid:25)(cid:25)(cid:25)ततततररररीीीीयययय पपपपककैैककैै ेेेे----जजजजगगगग’’ से पैकेYजग के िलए (cid:30)युK या (cid:30)युK क(cid:21) जाने वाली कोई साम@ी अिभ(cid:30)ेत ह ै और कागज, कागज बोड(cid:13), ब1लcय सामि@या,ं धाि=वक सतह) या ए(cid:3)युिमिनयम पि-या ंजो यो तो लेिमनेट Iप म Aया सह-बिहवेध(cid:13)न Iप म Aजैसे साम@ी के एक से अिधक सतह का संयोजन रखती है ; (ड) “(cid:31)(cid:31)(cid:31)(cid:31)ललललाााािििि(cid:25)(cid:25)(cid:25)(cid:25)टटटटकककक’’ से ऐसी साम@ी अिभ(cid:30)ेत ह ैिजसम A पोलीथाइलीन टेरेफेथेलेट, उbच घन=व पोलीथाइलीन, िवनाइल (पीवीसी), कम घन=व पोलीथाइलीन, पोली(cid:30)ोपीलीन, पोली(cid:25)टाइरीन रेिसन, ए+(cid:21)लोनीSीइलीन बूटाडीन (cid:25)टाइ.रन (एबीएस) जैसी ब1 साम@ी, पोली(cid:1)फनाइलीन आBसाइड (पीपीओ), पोलीकाबeनेट (पीसी), पोलीबूटीलीन टेरे(cid:1)फथालेट (पीबीटी) जैसी उf पािलमर के आव%यक त=व अ(cid:8)तWव(cid:29) ह) और जो तैयार उ=पाद क(cid:21) (cid:30)(cid:1)+या म A(cid:1)कसी (cid:25)तर तक बहाव (cid:22)ारा आका.रत (cid:1)कया जा सकता हो; (ढ) “(cid:31)(cid:31)(cid:31)(cid:31)ललललाााािििि(cid:25)(cid:25)(cid:25)(cid:25)टटटटकककक चचचच////रररर’’ से चौडा़, पतला, (cid:30)ाय: आयताकार िप(cid:8)ड या िप(cid:8)ड का भाग अिभ(cid:30)ेत है और सिHमिलत ह;ै (ण)् “(cid:31)(cid:31)(cid:31)(cid:31)ललललाााािििि(cid:25)(cid:25)(cid:25)(cid:25)टटटटकककक अअअअपपपपििििशशशश2222’’ से (cid:23)लाि(cid:25)टक से तैयार ऐसा कोई उ=पाद अिभ(cid:30)ेत है िजस ेउपयोग के पOात या आशियत जीवन समा/ हो जान ेके पOात फAक (cid:1)दया जाता ह ै; (त) “ििििववववििििहहहहतततत (cid:15)(cid:15)(cid:15)(cid:15)ााााििििधधधधककककााााररररीीीी’’ से िनयम 12 म AिविनTद(cid:29) (cid:30)ािधकारी अिभ(cid:30)ेत ह;ै (थ) “उउउउ!!!!पपपपााााददददकककक’’ से कैरी बैग या ब1(cid:25)तरीय पैकेYजग या (cid:23)लाि(cid:25)टक शीट या जैसे के िविनमा(cid:13)ण म A लगा !िK अिभ(cid:30)ेत ह ै और (cid:23)लाि(cid:25)टक शीट या जैसे या (cid:23)लाि(cid:25)टक शीट के बनाए गए कवर या व(cid:25)तु क(cid:21) पैकेYजग या ढकने के िलए ब1(cid:25)तरीय पैकेYजग का उपयोग कर रह े उ‘ोग या !िK सिHमिलत ह 3 (द) “ररररििििजजजज(cid:25)(cid:25)(cid:25)(cid:25)4444ीीीीककककररररणणणण’’ से यथाि(cid:25)थित, रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) या संबG (cid:30)दषू ण िनयं(cid:19)ण सिमित म Aरिज(cid:25)Sीकृत अिभ(cid:30)ेत है (ध) “पपपपथथथथ ििििवववव5555ेेेेतततताााा’’ का वही अथ (cid:13) होगा जो पथ िव+ेता (आजीिवका का संर8ण और पथ िव+य का िविनयमन) अिधिनयम, 2014 (2014 का 7) क(cid:21) धारा 2 क(cid:21) उपधारा (1) के खंड (1) म Aह ै; (न) “शशशशहहहहररररीीीी (cid:25)(cid:25)(cid:25)(cid:25)थथथथााााननननीीीीयययय ििििननननककककाााायययय’’ से नगर िनगम, Hयुिनिसपिलटी, नगर पािलका, नगर िनगम. नगर पंचायत, नगरपािलका प.रषद अिभ(cid:30)ेत ह ै और िजसके अ(cid:8)तग(cid:13)त अिधसूिचत 8े(cid:19) सिमित (एनएसी) या सुसंगत कानून) के अधीन ग.ठत कोई अ(cid:8)य (cid:25)थानीय िनकाय और जहां (cid:23)लाि(cid:25)टक अपिश(cid:29) का (cid:30)बंध ऐसे अिभकरण को सgपा गया ह,ै सिHमिलत ह3; (प) “अअअअ(cid:15)(cid:15)(cid:15)(cid:15)यययय66ुु66ुु (cid:31)(cid:31)(cid:31)(cid:31)ललललाााािििि(cid:25)(cid:25)(cid:25)(cid:25)टटटटकककक’’ से ऐसी (cid:23)लाि(cid:25)टक साम@ी अिभ(cid:30)ेत ह ै िजसका पहले उपयोग नह0 (cid:1)कया गया ह ै या र$ी या अपिश(cid:29) के साथ भी सिHमिhत नह0 (cid:1)कया गया ह ै; (फ) “अअअअपपपपििििशशशश2222 जजजजििििनननन(cid:13)(cid:13)(cid:13)(cid:13)’’ से (cid:30)=येक !िK या !िKय) का समूह या सं(cid:25)था, भारतीय रेल और र8ा क(cid:8)टू(cid:8)मAट जो अपिश(cid:29) (cid:23)लाि(cid:25)टक पैदा करत े ह 3सिहत .रहायसी और वािणि_यक (cid:25)थापन अिभ(cid:30)ेत है और सिHमिलत ह;ै (ब) “अअअअपपपपििििशशशश2222 (cid:15)(cid:15)(cid:15)(cid:15)बबबबधधंंधधंं ’’ से (cid:23)लाि(cid:25)टक अपिश(cid:29) क(cid:21) वै^ािनक Iप से कमी, पुन: उपयोग, पुन:(cid:30)ाि/, पुन:च+ण, कंपोि(cid:25)टग या !यन अिभ(cid:30)ेत है; (भ) “अअअअपपपपििििशशशश2222 चचचचननुुननुु नननन ेे ेेववववाााालललल’ेेेे’ से पुन:च+ण योiय (cid:23)लाि(cid:25)टक अपिश(cid:29) के चुनने म Aलगे 1ए (cid:25)वैिbछक !िK या !िKय) का समूह अिभ(cid:30)ेत है; 4444.... शशशशतततत 77 77– कैरी बैग, (cid:23)लाि(cid:25)टक शीट या इसी (cid:30)कार या (cid:23)लाि(cid:25)टक शीट या ब1(cid:25)तरीय पैकेYजग के बने आवरण के िविनमा(cid:13)ण, भंडारण, िवतरण, िव+य और उपयोग के अनु+म दौरान िनkिलिखत शत lपूरी क(cid:21) जाएंगी, अथा(cid:13)त:्- (क) कैरी बैग या तो (cid:30)ाकृितक रंग (रंगहीन) जो (cid:1)कसी िमलाए गए रंजक से रिहत है या केवल उ(cid:8)ह0 रंजक) और रंगक) का उपयोग कर बनाए गए ह 3 जो समय-समय पर यथा-संशोिधत “खा‘ पदाथn, भेषजीय पदाथn और पीने के पानी के संपक(cid:13) मA आने वाली पलाि(cid:25)टक) के उपयोग के िलए रंजक) और रंगक) क(cid:21) सूची” नामक शीष(cid:13)क से भारतीय मानक: आईएस 9833:1981 के अनुIप ह;34 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (ख) पुन:च(cid:1)+त (cid:23)लाि(cid:25)टक या पुन:च(cid:1)+त (cid:23)लाि(cid:25)टक से बने (cid:1)कसी उ=पाद का उपयोग खा‘ साम@ी का भंडार करने, वहन करने, िवतरण करने या पैकेYजग करने के िलए नह0 (cid:1)कया जाएगा; (ग) अ(cid:30)युK या पुन:च(cid:1)+त के बने (cid:1)कसी कैरी बैग क(cid:21) मोटाई म A50 माइ+ो(cid:8)स से कम नह0 होगी ; (घ) (cid:23)लाि(cid:25)टक शीट या इसी (cid:30)कार, जो ब1(cid:25)तरीय पैकेYजग या व(cid:25)तु क(cid:21) पैकेYजग या लपेटने के िलए (cid:30)युK (cid:23)लाि(cid:25)टक शीट के बने कवर का अिभ- भाग नह0 ह ैक(cid:21) मोटाई 50 माइ+ो(cid:8)स से कम नह0 होगी; (ड) िविनमा(cid:13)ता संबG रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड (cid:13) या (cid:30)दषू ण िनयं(cid:19)ण सिमित से िविधमा(cid:8)य रिज(cid:25)Sीकरण न रखने वाले उ=पादक को कfी साम@ी के Iप म A(cid:30)युK होन ेवाली (cid:23)लाि(cid:25)टक को न बेचेगा या न उपलNध कराएगा या न !व(cid:25)था करेगा; (च) गुटखा, तHबाकू और पान मसाला के भंडारण, पैoकग या िब+(cid:21) हेतु (cid:23)लाि(cid:25)टक साम@ी युK सैशे का उपयोग नह0 (cid:1)कया जाएगा; (छ) पुन:च(cid:1)+त कैरी बैग, समय-समय पर यथा संशोिधत भारतीय मानक के (cid:23)लाि(cid:25)टक के पुन:च+ण के िलए माग(cid:13)दश(cid:13)न नामक िविनदशp भा.मा.14539:1998 के अनुIप ह)गे; (ज) कंपो(cid:25)ट यो_य (cid:23)लाि(cid:25)टक) से बने कैरी बैग समय-समय पर यथा संशोिधत भारतीय मानक के कंपो(cid:25)ट यो_य (cid:23)लाि(cid:25)टक के िलए िविनदशp नामक भा.मा.14539:1998 के अनुIप ह)गे; (झ) (cid:1)कसी भी (cid:30)कार क(cid:21) (cid:23)लाि(cid:25)टक साम@ी का उपयोग (cid:1)कसी पैकज म Aसभी (cid:30)कार के गुटका, पान मसाला और तHबाकू के पैकेYजग के िलए नह0 (cid:1)कया जाएगा । 5. (cid:31)(cid:31)(cid:31)(cid:31)ललललाााािििि(cid:25)(cid:25)(cid:25)(cid:25)टटटटकककक अअअअपपपपििििशशशश2222 (cid:15)(cid:15)(cid:15)(cid:15)बबबबधधंंधधंं - (1) शहरी (cid:25)थानीय िनकाय) (cid:22)ारा अपने संबG अिधका.रता म A(cid:23)लाि(cid:25)टक अपिश(cid:29) (cid:30)बंध इस (cid:30)कार होगा:- (क) शुqक जैव िनkीकरण योiय अपिश(cid:29), सुखा पुन: च+ण योiय और _वलन योiय अपिश(cid:29)) और घरेलू संकटमय अपिश(cid:29) का ;ोत पर पृथrरण ठोस अपिश(cid:29) (cid:30)बंध िनयम, 2015 के अनुसार (cid:1)कया जाएगा ; (ख) ऐसा (cid:23)लाि(cid:25)टक अपिश(cid:29) िजसे पुन:च(cid:1)+त (cid:1)कया जा सकता हो, को रिज(cid:25)Sीकृत (cid:23)लाि(cid:25)टक अपिश(cid:29) पुन:च+क को प1चं ाया जाएगा और (cid:23)लाि(cid:25)टक का पुन:च+ण समय-समय पर यथा-संशोिधत भारतीय मानक:आईएस 14534:1998 के अनुसार (cid:1)कया जाएगा; (2) शहरी (cid:25)थानीय िनकाय इस बाबत िविहत अिधकारी (cid:22)ारा िविनTद(cid:29) मानक) और (cid:30)दषू ण िनय(cid:19)ं ण सि-यम) के अनुपालन म,A ऊजा(cid:13) (cid:30)ाि/ आ(cid:1)द के िलए सड़क िनमा(cid:13)ण जैसे उपयुK तकनीक अपनाकर (cid:23)लाि(cid:25)टक अपिश(cid:29) के उपयोग को (cid:30)ो=सािहत करAगे; (3) ताप(cid:25)थायी (cid:23)लाि(cid:25)टक सिहत (cid:23)लाि(cid:25)टक का (cid:30)सं(cid:25)करण और !यन के(cid:8)(cid:9)ीय (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) (cid:22)ारा समय समय पर जारी माग(cid:13)दश(cid:13)क िसGांत) के अनुसार (cid:1)कया जाएगा ; (4) (cid:23)लाि(cid:25)टक अपिश(cid:29) क(cid:21) सुिवधाE के पुन:च+ण या (cid:30)सं(cid:25)करण के अ(cid:1)+य का !यन ठोस अपिश(cid:29) (cid:30)बंध िनयम, 2015 के अनुपालन म A (cid:1)कया जाएगा | 6. शशशशहहहहररररीीीी (cid:25)(cid:25)(cid:25)(cid:25)थथथथााााननननीीीीयययय ििििननननककककाााायययय ककककाााा ददददाााािििियययय!!!!वववव (1) (cid:30)=येक शहरी (cid:25)थानीय िनकाय (cid:25)वय ं या अिभकरण या उ=पादक लगाकर (cid:23)लाि(cid:25)टक अपिश(cid:29) के पृथrरण या सं@हण, भंडारण, प.रवहन, (cid:30)सं(cid:25)करण और !यन क(cid:21) अवसंरचना को िवकिसत करने और (cid:25)थापना के िलए उJरदायी होगा; (2) शहरी (cid:25)थानीय िनकाय अपिश(cid:29) (cid:30)बंध (cid:30)णाली क(cid:21) (cid:25)थापना, (cid:30)चालन और सम(cid:8)वय के िलए तथा सहयोिजत कृ=य) के िनव(cid:13)हन के िलए उJरदायी होगा, अथा(cid:13)त;् (क) (cid:23)लाि(cid:25)टक अपिश(cid:29) के सं@हण, भंडारण, पृथrरण, प.रवहन, (cid:30)सं(cid:25)करण और !यन को सुिनिOत करना; (ख) यह सुिनिOत करना (cid:1)क इस (cid:30)(cid:1)+या के दौरान पया(cid:13)वरण को कोई हािन न हो;¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 5 (ग) पुन:च+ण करने वाले लोग) के (cid:30)ित पुन:च+ण योiय (cid:23)लाि(cid:25)टक अपिश(cid:29) भाग के सरणीकरण को सुिनिOत करना; (घ) के(cid:8)(cid:9)ीय (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) (cid:22)ारा जारी माग (cid:13) िनदशp क िसGात) के अनुसार (cid:23)लाि(cid:25)टक अपिश(cid:29) के गैर पुन:च+ण योiय भाग के (cid:30)सं(cid:25)करण और !यन को सुिनिOत करना; (ड) सभी पणधा.रय) म Aउनके उJरदािय=व के िलए जागृित पैदा करना; (च) अपिश(cid:29) चुनने वाल) के काय (cid:13)कर रहे िसिवल सोसायटी या समूह) को लगाना; और (छ) यह सुिनिOत करना (cid:1)क (cid:23)लाि(cid:25)टक अपिश(cid:29) को खुले म Aन जलाया जाए । (3) अपिश(cid:29) के िलए (cid:30)णाली के गठन के िलए शहरी (cid:25)थानीय िनकाय उ=पादक) क(cid:21) सहायता लेगा और राजप(cid:19) म A इन िनयम) के अंितम तारीख के (cid:30)काशन से एक वष(cid:13) के भीतर ऐसी (cid:30)णाली का गठन (cid:1)कया जाएगा । 7777.... 8888ाााामममम पपपपचचंंचचंं ााााययययतततत9999 ककककाााा ददददाााािििियययय!!!!वववव---- (1) (cid:30)=येक @ाम पंचायत (cid:25)वय ंया अिभकरण के मा>यम से अपने िनयं(cid:19)ण के अधीन @ामीण 8े(cid:19) म Aअपिश(cid:29) (cid:30)बंधन के िलए और सहयोिजत कृ=य) के अनुपालन के िलए (cid:25)थापना, (cid:30)चालन और सम(cid:8)वय करेगा अथा(cid:13)त ् (क) (cid:23)लाि(cid:25)टक अपिश(cid:29) के सं@हण, भंडारण, पृथrरण, प.रवहन, (cid:30)सं(cid:25)करण और !यन को सुिनिOत करना; (ख) यह सुिनिOत करना (cid:1)क इस (cid:30)(cid:1)+या के दौरान पया(cid:13)वरण को कोई हािन न हो; (ग) िविधमा(cid:8)य रिज(cid:25)Sीकरण रखने वाले पुन:च+ण करने वाले लोग) के (cid:30)ित पुन:च+ण योiय (cid:23)लाि(cid:25)टक अपिश(cid:29) भाग के सरणीकरण को सुिनिOत करना; (घ) सभी पणधा.रय) म Aउनके उJरदािय=व के िलए जागृित पैदा करना; (ड) यह सुिनिOत करना (cid:1)क (cid:23)लाि(cid:25)टक अपिश(cid:29) को खुले म Aन जलाया जाए । 8888.... अअअअपपपपििििशशशश2222 जजजजननननकककक ककककाााा उउउउ::::ररररददददाााािििियययय!!!!वववव –––– (1) अपिश(cid:29) जनक – (क) ठोस अपिश(cid:29) (cid:30)बंध िनयम, 2015 के अनुसार (cid:23)लाि(cid:25)टक अपिश(cid:29) के जनन को कम करने और ;ोत पर (cid:23)लाि(cid:25)टक अपिश(cid:29) को पृथक करने के कदम उठाएगा | (ख) (cid:23)लाि(cid:25)टक अपिश(cid:29) को न िबखरने दगे ा और ;ोत पर अपिश(cid:29) का पृथक भंडारण सुिनिOत करेगा तथा पृथक अपिश(cid:29) को अपिश(cid:29) चुनने वाल), रिज(cid:25)Sीकृत पुन:च+ण कता(cid:13)E या अपिश(cid:29) सं@हण अिभकरण) को सgपेगा । (2) (cid:23)लाि(cid:25)टक अपिश(cid:29) के सभी सं(cid:25)थागत जनक उनके (cid:22)ारा जिनत अपिश(cid:29) का पृथrरण और भंडारण ठोस अपिश(cid:29) (cid:30)बंध िनयम, 2015 के अनुसार करAगे और पृथBकृत अपिश(cid:29)) को (cid:25)वयं के या (cid:30)ािधकृत अपिश(cid:29) अिभकरण के मा>यम से (cid:30)ािधकृत अपिश(cid:29) (cid:30)सं(cid:25)करण या !यन सुिवधा या िन8ेपण के(cid:8)(cid:9)) को सgपAग े। (3) सभी अपिश(cid:29) जनक ऐसी उपयोKा फ(cid:21)स या (cid:30)भार अदा करAगे जो अपिश(cid:29) सं@हण या उसक(cid:21) सुिवधा के (cid:30)चालन आ(cid:1)द जैसे (cid:23)लाि(cid:25)टक अपिश(cid:29) (cid:30)बंध के िलए शहरी (cid:25)थानीय िनकाय) क(cid:21) उपिविधय) म AिविनTद(cid:29) हो । (4) खुली जगह म A आयोजन क(cid:21) !व(cid:25)था करने वाला (cid:30)=येक उJरदायी !िK िजसम A (cid:23)लाि(cid:25)टक या ब1(cid:25)तरीय पैकेYजग म A खादय् साम@ी क(cid:21) सेवा अ(cid:8)तव(cid:13)िलत है, ऐसे आयोजन) के दौरान ठोस अपिश(cid:29) (cid:30)बंध िनयम, 2015 के अनुसार जिनत अपिश(cid:29) का पृथrरण और (cid:30)बंधन करेगा ।6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 9999.... उउउउ!!!!पपपपााााददददकककक9999 ककककाााा ददददाााािििियययय!!!!वववव –––– ((((1111)))) उ=पादक इन िनयम) के (cid:30)काशन क(cid:21) तारीख से छह मास क(cid:21) अविध के भीतर !िKगत या सामूिहक Iप स े अपने िनजी िवतरण चैनल या संबG शहरी (cid:25)थानीय िनकाय के मा>यम से िव(cid:25)ता.रत उ=पादक दािय=व पर आधा.रत अपिश(cid:29) सं@हण (cid:30)णाली के िलए रा_य शहरी िवकास िवभाग को सिHमिलत करते 1ए Iपरेखा तैयार करेगा । (2) उ=पादक इन िनयम) के अंितम (cid:30)काशन क(cid:21) तारीख से तीन मास क(cid:21) अविध के भीतर ब1(cid:25)तरीय पैकेYजग का उपयोग ब(cid:8)द कर दगे ा और ऐसी (cid:23)लाि(cid:25)टक का उपयोग करना आरंभ करेगा जो व(cid:25)तु क(cid:21) पैकेYजग के िलए पुन:च+ण योiय या कHपो(cid:25)ट योiय ह ै। (3) उ=पादक राजप(cid:19) म Aइन िनयम) के अंितम (cid:30)काशन क(cid:21) तारीख से तीन मास क(cid:21) अविध के भीतर रिज(cid:25)Sीकरण क(cid:21) मंजूरी के िलए रा_य) या संबG संघ रा_य 8े(cid:19)) के यथाि(cid:25)थित (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) या (cid:30)दषू ण िनयं(cid:19)ण सिमित को आवेदन करेगा । (4) कोई उ=पादक राजप(cid:19) म A इन िनयम) के अंितम (cid:30)काशन क(cid:21) तारीख से एक वष(cid:13) क(cid:21) अविध क(cid:21) समाि/ पर या इसके पOात संबG रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड (cid:13) या (cid:30)दषू ण िनयं(cid:19)ण सिमितय) स े रिज(cid:25)Sीकरण के िबना ब(cid:25)तुE के पैकेYजग के िलए (cid:1)कसी (cid:23)लाि(cid:25)टक या ब1(cid:25)तरीय पैकेYजग का िविनमा(cid:13)ण या उपयोग नह0 करेगा । (5) (cid:30)=येक उ=पादक कैरी बैग या (cid:23)लाि(cid:25)टक शीट या इसी (cid:30)कार या (cid:23)लाि(cid:25)टक शीट या ब1(cid:25)तरीय पैकेYजग के बने कवर के िविनमा(cid:13)ण के िलए कfी साम@ी के Iप म A(cid:30)युK (cid:23)लाि(cid:25)टक क(cid:21) आपूWत म Aलगे !िK के Nयौर) के अिभलेख बनाए रखेगा । 10. ककककंंंंपपपपोोोो(cid:25)(cid:25)(cid:25)(cid:25)टटटट ययययोोोो(cid:30)(cid:30)(cid:30)(cid:30)यययय (cid:31)(cid:31)(cid:31)(cid:31)ललललाााािििि(cid:25)(cid:25)(cid:25)(cid:25)टटटटकककक ससससााााममममिििि8888यययय9999 ककककेेेे ििििललललएएएए ननननययययााााचचचचाााारररर ---- (cid:23)लाि(cid:25)टक साम@ी के अव+मण क(cid:21) िड@ी और िवघटन क(cid:21) िड@ी का िनधा(cid:13)रण, इन िनयम) अनुसूची 1 म AसूचीबG भारतीय मानक) के नयाचार) के अनुसार होगा | 11111111.... ििििववववपपपपणणणणनननन ययययाााा ललललेबेबेबेबलललल ललललगगगगााााननननाााा---- (1) (cid:30)=येक (cid:23)लाि(cid:25)टक कैरी बैग और ब1(cid:25)तरीय पैकेYजग पर अं@ेजी म A और रा_य या संघ रा_य8े(cid:19) म A (cid:30)योग (cid:1)कए जाने वाली भाषा म A िनkिलिखत जानकारी मु(cid:1)(cid:9)त क(cid:21) जाएगी, अथा(cid:13)त ्:- (क) कैरी बैग क(cid:21) दशा म Aिविनमा(cid:13)णकता (cid:13)का नाम, उसका रिज(cid:25)Sीकरण संtया और मोटाई; और (ख) ब1(cid:25)थरीय पैकेYजग क(cid:21) दशा म Aिविनमाण(cid:13) कता (cid:13)का नाम और उसका रिज(cid:25)Sीकरण संtया । (2) (cid:30)=येक पुन:च(cid:1)+त कैरी बैग पर िनkिलिखत Iप म AयथादWशत “पुन:च(cid:1)+त” लेबल या िच(cid:8)ह होगा और भारतीय मानक के समय समय पर यथा संशोिधत पुन:च(cid:1)+त (cid:23)लाि(cid:25)टक के िलए माग(cid:13)दश(cid:13)क नामक िविनदशp भा.मा.14534:1998 के अनुसार होगा; .ट(cid:23)पण: पैट-पोलीथाइिलन टेरीफैथेलेट, एचडीईपी-उf डAिसटी पोलीथाइिलन, वी-िवनाइल (पीवीसी), एलडीपीई – िनk डAिसटी पोलीथाइिलन, पीपी-पोली(cid:30)ोिपिलन, पीएस पोली(cid:25)टाय.रन और अ(cid:8)य से अिभ(cid:30)ेत सभी अ(cid:8)य राल और ब1सामि@यां ह 3 जैसे एबीएस (ए+(cid:21)लोिनSाइल बूटािडन (cid:25)टाय.रन), पीपीओ (पोलीफेननाइिलन आBसाइड), पीसी (पोलीकाबeनेट), पीवीटी (पोलीबूटीलेन पेरीफेलेट) आ(cid:1)द ।¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 7 (3) कंपो(cid:25)ट यो_य (cid:23)लाि(cid:25)टक) स े बने (cid:30)=येक कैरी बैग पर कंपो(cid:25)ट यो_य का लेबल लगा होगा और भारतीय मानक के कंपो(cid:25)ट यो_य (cid:23)लाि(cid:25)टक के िलए िविनदशp नामक िविनदशp भा.मा./भा.मा.स. 17088:2008 के अनुIप होगा | 11112222.... ििििववववििििहहहहतततत (cid:15)(cid:15)(cid:15)(cid:15)ााााििििधधधधककककााााररररीीीी (1) (cid:1)कसी संघ रा_य8े(cid:19) क(cid:21) बाबत रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड (cid:13)या (cid:30)दषू ण िनयं(cid:19)ण सिमित रिज(cid:25)Sीकरण, (cid:23)लाि(cid:25)टक उ=पाद) और ब1(cid:25)तरीय पैकेYजग के िविनमाण(cid:13) , अपिश(cid:29) (cid:23)लाि(cid:25)टक के (cid:30)सं(cid:25)करण और !यन से संबंिधत इन िनयम) के उपबंध) को (cid:30)वृJ करने के िलए (cid:30)ािधकारी होगा ; (2) रा_य या संघ रा_य8े(cid:19) के शहरी िवभाग का संबG भारसाधक सिचव अपिश(cid:29) जनक (cid:22)ारा अपिश(cid:29) (cid:30)बंधन, (cid:23)लाि(cid:25)टक कैरी बैग, (cid:23)लाि(cid:25)टक शीट या इसी (cid:30)कार के (cid:23)लाि(cid:25)टक शीट) और ब1(cid:25)तरीय पैकेYजग से बने कवर के उपयोग स े संबंिधत इन िनयम) के उपबंध) को (cid:30)वृJ करने के िलए (cid:30)ािधकारी होगा ; (3) संबG @ाम पंचायत रा_य या संघ रा_य8े(cid:19) के @ामीण 8े(cid:19)) म A अपिश(cid:29) जनक (cid:22)ारा अपिश(cid:29) (cid:30)बंधन, (cid:23)लाि(cid:25)टक कैरी बैग, (cid:23)लाि(cid:25)टक शीट या इसी (cid:30)कार के (cid:23)लाि(cid:25)टक शीट) और ब1(cid:25)तरीय पैकेYजग से बने कवर के उपयोग से संबंिधत इन िनयम) के उपबंध) को (cid:30)वृJ करने के िलए (cid:30)ािधकारी होगा ; (4) उपिनयम (1) से (3) म A िनTद(cid:29) (cid:30)ािधकारी इन िनयम) के उपबंध) के (cid:30)वत(cid:13)न म A संबG िजले क(cid:21) अिधका.रता क(cid:21) रा_य8े(cid:19) क(cid:21) सीमाE के भीतर िजला मिज(cid:25)Sेट या उपायुK क(cid:21) सहायता लेगा | 13. उउउउ!!!!पपपपााााददददकककक,,,, पपपपननुुननुु ::::चचचच5555णणणणककककतततताााा (cid:4)(cid:4)(cid:4)(cid:4)औऔऔऔरररर ििििववववििििननननममममााााणण(cid:4)(cid:4)णण(cid:4)(cid:4) ककककतततताााा (cid:4)(cid:4)(cid:4)(cid:4)ककककाााा ररररििििजजजज(cid:25)(cid:25)(cid:25)(cid:25)4444ीीीीककककररररणणणण---- (1) कोई !िK कैरी बैग) या पुन:च(cid:1)+त (cid:23)लाि(cid:25)टक बैग) और ब1(cid:25)तरीय (cid:23)लाि(cid:25)टक) का िविनमा(cid:13)ण तब तक नह0 करेगा जब तक (cid:1)क उसने उ=पादन के (cid:30)ारंभ से पूव(cid:13) यथाि(cid:25)थित रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड (cid:13) या संघ रा_य8े(cid:19) क(cid:21) (cid:30)दषू ण िनयं(cid:19)ण सिमित से रिज(cid:25)Sीकरण (cid:30)माणप(cid:19) अिभ(cid:30)ा/ न हो गया हो; (2) (cid:30)=येक उ=पादन कता (cid:13) रिज(cid:25)Sीकरण के िलए या रिज(cid:25)Sीकरण के नवीकरण के िलए रा_य रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) या संघ रा_य8े(cid:19) क(cid:21) (cid:30)दषू ण िनयं(cid:19)ण सिमित को उपाबG (cid:30)Iप 1 का (cid:30)योग करते 1ए आवेदन करेगा | (3) ऐसा कोई !िK जो कैरी बैग और ब1(cid:25)तरीय (cid:23)लाि(cid:25)टक) या (cid:23)लाि(cid:25)टक अपिश(cid:29) का पुन:च+ण करता ह ै या पुन:च+ण करने के िलए (cid:30)(cid:25)ताव करता ह,ै उपाबG (cid:30)Iप 2 का (cid:30)योग करते 1ए पुन:च+ण यूिनट के िलए रिज(cid:25)Sीकरण (cid:30)दान करने के िलए या रिज(cid:25)Sीकरण का नवीकरण करने के िलए रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) या (cid:30)दषू ण िनय(cid:19)ं ण सिमित को आवेदन करेगा | (4) उ=पादक (cid:22)ारा कfी साम@ी के Iप म A(cid:30)युK क(cid:21) जाने वाली (cid:23)लाि(cid:25)टक के िविनमा(cid:13)ण म A लगे (cid:30)=येक िविनमात(cid:13) ा (cid:30)Iप 3 म Aरिज(cid:25)Sीकरण क(cid:21) मंजूरी या रिज(cid:25)Sीकरण के नवीकरण के िलए रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) या संबG संघ रा_य8े(cid:19) क(cid:21) (cid:30)दषू ण िनयं(cid:19)ण सिमित को आवेदन करेगा; (5) राज्य (cid:30)दषू ण िनयं(cid:19)ण बोड (cid:13) और (cid:30)दषू ण िनयं(cid:19)ण सिमित िविनमा(cid:13)ण या पुन:च+ण यूिनट) के िलए कोई रिज(cid:25)Sीकरण तब तक जारी नह0 करेगी या उसका नवीकरण नह0 करेगी जब तक (cid:1)क यूिनट, जल ((cid:30)दषू ण िनवारण तथा िनयं(cid:19)ण) अिधिनयम, 1974 (1974 का 6) और वायु ((cid:30)दषू ण िनवारण तथा िनयं(cid:19)ण) अिधिनयम, 1981 (1981 का 14) के अधीन कोई िविधमा(cid:8)य सहमित नह0 रखती हो और िजला उ‘ोग के(cid:8)(cid:9) या इस संबंध म A(cid:30)ािधकृत (cid:1)कसी अ(cid:8)य सरकारी अिभकरण (cid:22)ारा जारी रिज(cid:25)Sीकरण का (cid:30)माणप(cid:19) न रखती हो; (6) रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) और (cid:30)दषू ण िनयं(cid:19)ण सिमित उ=पादक के रिज(cid:25)Sीकरण का नवीकरण तब तक नह0 करेगा जब तक उ=पादक (cid:23)लाि(cid:25)टक अपिश(cid:29) (cid:30)णाली क(cid:21) (cid:25)थापना के िलए संबG रा_य या संघ रा_य8े(cid:19) के शहरी िवकास के भारसाधक सिचव (cid:22)ारा पृuां(cid:1)कत काय (cid:13) योजना न रखता हो ; (7) उपिनयम (3) के अ(cid:8)तग(cid:13)त (cid:23)लाि(cid:25)टक अपिश(cid:29) के पुन:च+ण या (cid:30)सं(cid:25)करण के रिज(cid:25)Sीकरण के िलए सभी (cid:30)कार से पूण (cid:13) आवेदन क(cid:21) (cid:30)ाि/ पर रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड (cid:13)ऐसी जांच करने के पOात ्जो वह आव%यक समझे और यह समाधान हो जाने पर (cid:1)क आवेदक के पास8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] समुिचत सुिवधाएं तकनीक(cid:21) योiयताए ं और (cid:23)लाि(cid:25)टक अपिश(cid:29) से सुरि8त Iप से िनपटन े के िलए उपकरण ह3, ऐसी शतn के पूरा होने पर आवेदक को रिज(cid:25)Sीकरण मंजूर कर सकेगा जो रिज(cid:25)Sीकरण के िनबंधन) म Aअिभकिथत क(cid:21) जाएं ; (8) (cid:30)=येक रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड (cid:13) या (cid:30)दषू ण िनयं(cid:19)ण सिमित, सभी (cid:30)कार से पूर्ण आवेदन क(cid:21) (cid:30)ाि/ के नNबे (cid:1)दन) के भीतर रिज(cid:25)Sीकरण (cid:30)दान करने हते ु िविनOय करेगा| (9) इस िनयम के अधीन अनुदJ रिज(cid:25)Sीकरण जब तक (cid:1)क वह िवखंिडत, िनलंिबत या र$ नह0 कर (cid:1)दया जाता ह ै एक वष(cid:13) क(cid:21) अविध के िलए िविधमा(cid:8)य होगा और बाद म Aउसे तीन वष(cid:13) तक बढ़ाया जा सकता ह ै| (10) रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) या (cid:30)दषू ण िनयं(cid:19)ण सिमित, रिज(cid:25)Sीकरण को उ=पादक या (cid:23)लाि(cid:25)टक अपिश(cid:29) के पुन:च+ण या (cid:30)सं(cid:25)करण म Aलगे 1ए !िK को सुनवाई का अवसर (cid:1)दए िबना िवखंिडत, िनलंिबत या र$ नह0 करेगी | (11) रिज(cid:25)Sीकरण के नवीकरण के िलए (cid:30)=येक आवेदन, रिज(cid:25)Sीकरण (cid:30)माणप(cid:19) क(cid:21) िविधमा(cid:8)यता क(cid:21) समाि/ स ेकम स ेकम एक सौ बीस (cid:1)दन पूव (cid:13)(cid:1)कया जाएगा | 14. खखखखुदुदुदुदरररराााा ििििवववव5555ेेेेतततताााा;;;; औऔऔऔरररर पपपपथथथथ ििििवववव5555ेेेेतततताााा;;;; ककककाााा ददददाााािििियययय!!!!वववव –––– (1) खुदरा िव+ेता या पथ िव+ेता उपभोKा को ऐसे कैरी बैग या (cid:23)लाि(cid:25)टक शीट या ब1-(cid:25)तरीय पैकेYजग म A व(cid:25)तु नह0 बेचेगा या उपलNध कराएगा जो इन िनयम) के अधीन िविहतानुसार िविनWमत या लेबल लगे या िचि(cid:8)हत नह0 ह ै| (2) (cid:23)लाि(cid:25)टक कैरी बैग या ब1-(cid:25)तरीय पैकेYजग या (cid:23)लाि(cid:25)टक शीट या इसी (cid:30)कार या ऐसे (cid:23)लाि(cid:25)टक शीट से बने जो इन िनयम) के अनसु ार िविनWमत या लेबिलत या िचि(cid:8)हत नह0 ह 3म Aव(cid:25)तुE को बेचने या उपलNध कराने वाला (cid:30)=येक खुदरा िव+ेता या पथ िव+ेता ऐसा जुमान(cid:13) ा दने े का दायी होगा जो शहरी (cid:25)थानीय िनकाय) क(cid:21) िविधय) म AिविनTद(cid:29) हो | 11115555.... ककककैैैैररररीीीी बबबबैगैगैगैग9999 कककक<<<< कककक<<<<ममममतततत ससससििुुििुुननननिििि====तततत ककककररररननननाााा –––– 1. कोई भी कैरी बैग उपभोKा को खुदरा िव+ेता (cid:22)ारा िन:शु(cid:3)क उपलNध नह0 कराया जाएगा | 2. संबG शहरी (cid:25)थानीय िनकाय अिधसूचना (cid:22)ारा कैरी बैग) के िलए, उनक(cid:21) vािलटी और साइज पर आधा.रत िजसमA उनक(cid:21) साम@ी और अपिश(cid:29) (cid:30)बंधन लागत भी सिHमिलत ह,3 उनके पुन: उपयोग को (cid:30)ो=सािहत करने के िलए िजससे (cid:23)लाि(cid:25)टक अपिश(cid:29) उ=पादन को कम (cid:1)कया जा सके, (cid:8)यूनतम क(cid:21)मत अवधा.रत करेगा | 3. शहरी (cid:25)थानीय िनकाय अिधसचू ना (cid:22)ारा उपिनयम (2) के अधीन कैरी बैग के िलए खुदरा िव+ेताE को उपभोKाE (cid:22)ारा (cid:1)कए गए संदाय को जमा करने क(cid:21) रीित अवधा.रत करेगा | 4. शहरी (cid:25)थानीय िनकाय कैरी बैग) के िलए उपभोKाE (cid:22)ारा संदJ रकम का अन(cid:8)यत: उपयोग अपनी अिधका.रताE के भीतर अपिश(cid:29) (cid:30)बंधन (cid:30)णाली क(cid:21) संधाय(cid:13)ता के िलए करेगा | 11116666.... रररराााा(cid:30)(cid:30)(cid:30)(cid:30)यययय (cid:25)(cid:25)(cid:25)(cid:25)ततततररररीीीीयययय ससससललललााााहहहहककककाााारररर ििििननननककककाााायययय –––– (1) रा_य सरकार या संघ रा_य8े(cid:19), इन िनयम) के (cid:1)+या(cid:8)वयन के (cid:30)भावी मानीटwरग करने के (cid:30)योजन के िलए रा_य (cid:25)तरीय सलाहकार सिमित का गठन करेगा िजसमA िनkिलिखत !िK ह)ग,े अथा(cid:13)त् :- (क) सिचव, शहरी िवकास िवभाग - अ>य8 (ख) रा_य पया(cid:13)वरण िवभाग से एक िवशेष^ – सद(cid:25)य (ग) रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) या (cid:30)दषू ण िनयं(cid:19)ण सिमित से एक िवशेष^ – सद(cid:25)य (घ) शहरी (cid:25)थानीय िनकाय से एक िवशेष^ – सद(cid:25)य (ड) गैर सरकारी संगठन से एक िवशेष^ - सद(cid:25)य (च) उ‘ोग 8े(cid:19) से एक िवशेष^ – सद(cid:25)य और¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 9 (छ) िश8ा सं(cid:25)था के 8े(cid:19) से एक िवशेष^ – सद(cid:25)य (2) रा_य (cid:25)तरीय सलाहकार िनकाय एक वष(cid:13) म A कम से कम एक बार बैठक करेगा और य(cid:1)द वह आव%यक समझता ह ै तो िवशेष^) को आमंि(cid:19)त कर सकेगा | 11117777.... ववववाााा@@@@षषषषकककक (cid:8)(cid:8)(cid:8)(cid:8)ररररपपपपोोोोटटटटAA AA –––– (1) (cid:23)लाि(cid:25)टक अपिश(cid:29) के पुन:च+ण या (cid:30)सं(cid:25)करण म A लगा (cid:30)=येक !िK (cid:30)Iप 4 म A वाWषक .रपोर्ट तैयार करेगा और (cid:30)=येक वष(cid:13) के 30 अ(cid:30)ैल तक संबG रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) (cid:30)दषू ण िनयं(cid:19)ण सिमित क(cid:21) सूचना के अधीन संबG शहरी (cid:25)थानीय िनकाय को (cid:30)(cid:25)तुत करेगा | (2) (cid:30)=येक शहरी (cid:25)थानीय िनकाय (cid:30)=येक वष(cid:13) क(cid:21) 30 जुलाई संबG रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड (cid:13)(cid:30)दषू ण िनयं(cid:19)ण सिमित क(cid:21) सूचना के अधीन शहरी िवकास िवभाग के संबG भारसाधक सिचव को (cid:30)Iप 4 म AवाWषक .रपोट(cid:13) तैयार करेगा और (cid:30)(cid:25)तुत करेगा (3) (cid:30)=येक रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) या (cid:30)दषू ण सिमित, (cid:30)=येक वष(cid:13) 30 िसतंबर तक इन िनयम) के (cid:1)+यानव् यन पर वाWषक .रपोट(cid:13) तैयार करेगा और के(cid:8)(cid:9)ीय (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13) को (cid:30)(cid:25)तुत करेगा | (4) के(cid:8)(cid:9)ीय (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13), (cid:23)लाि(cid:25)टक अपिश(cid:29)) के उपयोग और (cid:30)बंधन पर समे(cid:1)कत एक वाWषक .रपोट(cid:13) तैयार करेगा और उसको (cid:30)=येक वष(cid:13) 30 (cid:1)दसंबर से पूव(cid:13) अपनी िसफा.रश) के साथ के(cid:8)(cid:9)ीय सरकार को अ@ेिषत करेगा | अअअअननननससुुससुु चचूूचचूू ीीीी----।।।। [िनयम 10 दखे (cid:4)] 1. भा.मा./भा.मा.स.14851: 1999 जलीय मा>यम से (cid:23)लाि(cid:25)टक साम@ी क(cid:21) अंितम (अ(cid:3)टीमेट) ऑBसी जैव िवघटनीयता ^ात करना-बंद रेसपीरोमीटर म AऑBसीजन क(cid:21) आव%यकता मापन (cid:22)ारा पGित 2. भा.मा./भा.मा.स. 14852: 1999 जलीय मा>यम म A(cid:23)लाि(cid:25)टक साम@ी क(cid:21) अंितम (अ(cid:3)टीमेट) ऑBसी जैव िवघटनीयता ^ात करना-उ=प- काब(cid:13)न डाइऑBसाइड के िवxेषण (cid:22)ारा पGित । 3. भा.मा./भा.मा.स. 14853: 2005 (cid:23)लाि(cid:25)टक-जलीय तं(cid:19) म A (cid:23)लाि(cid:25)टक साम@ी क(cid:21) अंितम (अ(cid:3)टीमेट) ऑBसी जैव िवघटनीयता ^ात करना-बायोगैस उ=पादन के मापन (cid:22)ारा पGित । 4. भा.मा./भा.मा.स. 14855-1: 2005 िनयंि(cid:19)क संघटक ि(cid:25)थितय) म A (cid:23)लाि(cid:25)टक साम@ी क(cid:21) अंितम (अ(cid:3)टीमेट) ऑBसी जवै िवघटनीयता ^ात करना-उ=प- काब(cid:13)न डाइऑBसाइड के िवxेषण (cid:22)ारा पGित (भाग-1 सामा(cid:8)य पGित)। 5. भा.मा./भा.मा.स. 14855-2: 2007 िनयंि(cid:19)क संघटक ि(cid:25)थितय) म A (cid:23)लाि(cid:25)टक साम@ी क(cid:21) अंितम (अ(cid:3)टीमेट) ऑBसी जवै िवघटनीयता ^ात करना-उ=प- काब(cid:13)न डाइऑBसाइड के िवxेषण (cid:22)ारा पGित (भाग-2; (cid:30)योगशाला-(cid:25)केल परी8ण म A उ=प- काब(cid:13)न डाइऑBसाइड का भारा=मक मापन)। 6. भा.मा./भा.मा.स. ।5985: 2004 (cid:23)लाि(cid:25)टक-उf-ठोसता क(cid:21) अनॉBसीय (एनोरोिबक) डाईजेशन ि(cid:25)थितय) म A अंितम (अ(cid:3)टीमेट) अनॉBसीय (एनोरोिबक) जैव िवघटनीयता एवं िवघटन ^ात करना-िनकली बायोबैस क(cid:21) िवxेषण पGित। 7. भा.मा./भा.मा.स. 16929: 2002 (cid:23)लाि(cid:25)टक-पायलट मापन परी8ण म Aप.रभािषत संघटक ि(cid:25)थितय) म A(cid:23)लाि(cid:25)टक साम@ी के िवघटन का (cid:25)तर ^ात करना। 8. भा.मा./भा.मा.स. 17556: 2003 (cid:23)लाि(cid:25)टक-रेसपीरोमीटर म A ऑBसीजन क(cid:21) आव%यकता अथवा उ=प- काबन(cid:13) डाइऑBसाइड के मापन (cid:22)ारा मृदा म Aअंितम (अ(cid:3)टीमटे ) ऑBसी जैव िवघटनीयता ^ात करना । 9. भा.मा./भा.मा.स. 20200: 2004 (cid:23)लाि(cid:25)टक-(cid:30)योगशाला म AअनुIपी कंपोY(cid:25)टग ि(cid:25)थितय) म A(cid:23)लाि(cid:25)टक सामि@य) के िवघटन का (cid:25)तर ^ात करना-(cid:25)केल परी8ण।10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (cid:15)(cid:15)(cid:15)(cid:15)पपपप(cid:13)(cid:13)(cid:13)(cid:13)----1111 [िनयम 13 (2) दखे (cid:4)] उउउउ!!!!पपपपााााददददकककक9999 ककककेेेे पपपपंजंजंजंजीीीीककककररररणणणण ककककेेेे ििििललललएएएए आआआआववववेदेदेदेदनननन (cid:30)ेषक .................. ......................... ............................ (अिधuाता का नाम और पूरा पता) सेवा म,A सद(cid:25)य सिचव, ......................... (cid:30)दषू ण िनयं(cid:19)ण बोड/(cid:13)(cid:30)दषू ण िनयं(cid:19)ण सिमित ................................... ................................... महोदय, म/3हम (cid:23)लाि(cid:25)टक अपिश(cid:29) ((cid:30)बंधन) िनयम, 2015 के िनयम 9 के अधीन पंजीकरण के िलए आवेदन करता {ं/करते ह।3 भभभभाााागगगग----कककक साधारण 1.(क) इकाई का नाम और अवि(cid:25)थित (ख) इकाई का नाम (ग) िनkिलिखत के िविनमा(cid:13)ण के िलए अपेि8त पंजीकरण : (i) कैरी बैग : (ii)ब1(cid:25)तरीय (cid:23)लाि(cid:25)टक (घ) िविनमाण(cid:13) 8मता (ड.) नवीकरण क(cid:21) दशा म,A पूव(cid:13) पंजीकरण संtया और पंजीकरण क(cid:21) तारीख 2. Bया इकाई, रा_य सरकार/संघ रा_य8े(cid:19) (cid:30)शासन म A डी आई सी/डीसीएसएसआई म Aपंजीकृत है ? य(cid:1)द हां, तो (cid:30)ित संल| करA। 3.(क) प.रयोजना पर िनवेिशत कुल पूंजी (ख) उ=पादन आरंभ करने का वष(cid:13) 4.(क) उ=पाद) और उप उ=पाद) क(cid:21) सूची और मा(cid:19)ा¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 11 (ख) (cid:30)युK कfी साम@ी क(cid:21) सूची और मा(cid:19)ा 5. उ=पाद) और उ=पा(cid:1)दत अपिश(cid:29) िनबंधन) म A िजसके अंतग(cid:13)त केि(cid:23)टव िव‘ुत उ=पादन और जल भी है, इनपुट और आउटपुट को दWशत करते 1ए िविनमाण(cid:13) कारी (cid:30)(cid:1)+या का एक (cid:30)वािहत डाय@ाम (cid:30)(cid:25)तुत करA। 6. िविनWमत (cid:1)कए जाने वाले कैरी बैग) का (cid:8)यूनतम आकार 7. इन िनयम) के अनुपालन क(cid:21) (cid:30)ाि(cid:25)थित भभभभाााागगगग----खखखख (cid:9)व बिह;ाव और गैसीय उ=सज(cid:13)न से संबंिधत 8. (क) Bया इकाई, जल ((cid:30)दषू ण िनवारण और िनयं(cid:19)ण) अिधिनयम, 1974 (1974 का 6) के अधीन िविधमा(cid:8)य सहमित रखती है ? य(cid:1)द हां, तो (cid:30)ित संल| करA (ख) Bया इकाई, वायु ((cid:30)दषू ण िनवारण और िनयं(cid:19)ण) अिधिनयम, 1981 (1981 का 14) के अधीन िविधमा(cid:8)य सहमित रखती है ? य(cid:1)द हो, तो (cid:30)ित संल| करA भभभभाााागगगग----गगगग अपिश(cid:29) से संबंिधत 9. ठोस अपिश(cid:29) : (क) उ=पा(cid:1)दत अपिश(cid:29) क(cid:21) कुल मा(cid:19)ा (ख) संयं(cid:19) के भीतर भंडारण क(cid:21) पGित (ग) अपिश(cid:29)) के !यन के िलए (cid:1)कए गए अपबंध 10. कैरी बैग अथवा समान (cid:30)कार क(cid:21) (cid:23)लाि(cid:25)टक शीट अथवा ब1(cid:25)तरीय पैकेYजग के िविनमाण(cid:13) के िलए कfी साम@ी के Iप म A (cid:30)युK (cid:1)कए जाने के िलए (cid:23)लाि(cid:25)टक क(cid:21) आपूWत करने वाले !िKय) क(cid:21) सूची संल| करA/उपलNध कराएं। नाम और ह(cid:25)ता8र पदनाम तारीख : (cid:25)थान :12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (cid:15)(cid:15)(cid:15)(cid:15)पपपप(cid:13)(cid:13)(cid:13)(cid:13)----II [िनयम 13 (3) दखे (cid:4)] (cid:31)(cid:31)(cid:31)(cid:31)लल लल ाााािििि(cid:25)(cid:25)(cid:25)(cid:25)टटटटकककक अअअअपपपपििििशशशशBBBBटट टट ककककेेेे (cid:15)(cid:15)(cid:15)(cid:15)सससस(cid:25)(cid:25)ंं(cid:25)(cid:25)ंं कक क क ररररणणणण एएएएववववं ं ं ं पपपपननुुननुु चचचच55(cid:4)(cid:4)55(cid:4)(cid:4) णणणण मममम CC CCससससंलंलंलंलDDDDनन नन इइइइककककााााइइइइयययय9999 ककककेेेे पपपपजजंंजजंं ीीीीककककररररणणणण हहहहततेेततेे ुु ुुआआआआववववददेेददेे नननन----(cid:15)(cid:15)(cid:15)(cid:15)पपपप(cid:13)(cid:13)(cid:13)(cid:13) 1. इकाई का नाम और पता 2. संपक(cid:13) } यिK, पदनाम, टेलीफोन/फैB स/ई- मेल सिहत 3. (cid:30)ारंभ (cid:1)कए जाने क(cid:21) तारीख 4. कम(cid:13)कार) क(cid:21) संt या (संिवदा hम सिहत) 5. सहमित िविधमा(cid:8) यता क. जल ((cid:30)दषू ण िनवारण तथा िनयं(cid:19)ण) अिधिनयम, 1974 ........... तक िविधमा(cid:8)य । ख. वायु ((cid:30)दषू ण िनवारण तथा िनयं(cid:19)ण) अिधिनयम, 1981 ............ तक िविधमा(cid:8)य । 6. (cid:30)ािधकरण िविधमा(cid:8) यता 7. िविनमाण(cid:13) (cid:30)(cid:1)+या कृपया िविनमा(cid:13)ण (cid:30)(cid:1)+या का (cid:30)वािहत डाय@ाम संलiन करA (cid:30)=य ेक उ=प ाद के िलए (cid:30)वािहत डाय@ाम। 8. उ= पाद और उ= पादन क(cid:21) संि(cid:25)थत 8मता उ=प ाद संि(cid:25)थत 8मता (एमटीए) 9. िपछले तीन वषn के दौरान िविनWमत वष(cid:13) उ=प ाद मा(cid:19)ा उ= पाद (यथा लागू) 10. िपछले तीन वषn के दौरान (cid:30)युBत कb चा वष(cid:13) उ=प ाद मा(cid:19)ा माल (यथा लागू) 11. जल उपभोग औ‘ोिगक............एम3/(cid:1)दन घरेलू.............../एम3/(cid:1)दन वह तारीख िजस तक जल उपकर संद= त (cid:1)कया गया ह ै(य(cid:1)द लागू हो तो)¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 13 सहमित के अनुसार अपिशq ट जल उ= पादन ............. व(cid:25)त ुत: उ=प ा(cid:1)दत अपिशqट जल (िपछले 3 मास का एम3 /(cid:1)दन औसत) औ‘ोिगक ........... एम3/(cid:1)दन घरेलू ............. एम3/(cid:1)दन अपिशq ट जल अिभ(cid:1)+या (अिभ(cid:1)+या (cid:25) क(cid:21)म का (cid:30)वािहत औ‘ोिगक डाय@ाम द)A घरेलू अपिशq ट जल उ= सज(cid:13)न मा(cid:19)ा............ एम3/(cid:1)दन अव(cid:25)थ ान...................... रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13)/(cid:30)दषू ण िनयं(cid:19)ण सिमित (cid:22)ारा िनयत पीएच, बीओडी, सीओडी, एसएस, ओ एंड जी, अ(cid:8)य पैरामीटर के िलए अपिशqट जल अिभ(cid:1)+या का िव%ल षे ण। 12. वायु (cid:30)दषू ण िनयं(cid:19)ण क. (cid:30)= येक (cid:30)सं(cid:25) करण इकाई, उपयोिगताE आ(cid:1)द के िलए संि(cid:25)थत ;ाव िनयं(cid:19)ण (cid:30)णाली ((cid:30)णािलय)) के िलए (cid:30)वािहत डाय@ाम द A ख. साम@ी (cid:30)ह(cid:25) तन, (cid:30)(cid:1)+या, उपयोिगताE आ(cid:1)द के कारण कb चे ;ाव) के िनयं(cid:19)ण के िलए उपलN ध सुिवधाE के N यौरे। ग. Mधन उपभोग Mधन मा(cid:19)ा (cid:30)ित(cid:1)दन/मास (i) (ii) घ. (cid:25) टेक ;ाव मानीटwरग िनHन िलिखत से ;ाव (एसपीएम, एसओ 2 संलiन (cid:25)ट ेक एनओएBस आ(cid:1)द) एमजी/एनएम3 (i) (ii) ड. प.रवेशी वायु गुणव= ता अव(cid:25)थ ान प.रणाम पैरामीटर (एसपीएम, एसओ 2 µg/एम3 एनओएBस आ(cid:1)द) µg/एम3 (i) (ii) 13. अपिशq ट (cid:30)बंधन : +. सं. (cid:30)कार (cid:30)वग(cid:13) मा(cid:19)ा क. (cid:23) लाि(cid:25)टक अपिशq ट (cid:30)सं(cid:25) करण मA अपिशqट उ=प ादन (i) (ii) (iii)14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] ख. अपिशq ट सं@हण और प.रवहन (N यौरे संलiन करA) ग. अपिशq ट } ययन N यौरे +. (cid:30)कार (cid:30)वग(cid:13) मा(cid:19)ा सं. (i) (ii) घ. } ययन सुिवधा के N यौरे द A ; B या सुिवधा रा_य (cid:30)दषू ण िनयं(cid:19)ण बोड/(cid:13)राजय् (cid:30)दषू ण िनयं(cid:19)ण सिमित (cid:22)ारा (cid:30)ािधकृत ह ै ड. कृपया उ= पा(cid:1)दत अपिशq ट के (cid:30)कृितकरण क(cid:21) िव% लेषण .रपोट(cid:13) संलi न करA (य(cid:1)द लागू हो तो िन8ालन परी8ण सिहत) 14. कb चे माल के Iप मA उपयोग के िलए यथाि(cid:25)थित, िव+य, (i) नाम नीलामी, संिवदा या आयात के मा> यम से (cid:30)ा(cid:23)त (cid:1)कए जाने के िलए (cid:30)(cid:25) तािवत (cid:23) लाि(cid:25)टक अपिशq ट Nय ौरे (ii) अपेि8त मा(cid:19)ा/वष(cid:13) 15. अिधभोग सुर8ा और (cid:25) वा(cid:25) 6 य पहलू कृपया सुिवधाE के Nय ौरे दA। 16. .ट(cid:23) पण : B या इकाई, ;ाव/बिह;ाव के मानक) के अनुपालन के य(cid:1)द हां, तो कृपया Nय ौरे द।A िलए पया(cid:13)(cid:23) त (cid:30)दषू ण िनयं(cid:19)ण (cid:30)णािलय(cid:127)/उप(cid:25)क र रखती ह।ै B या इकाई, उB त िनयम) मA अिधकिथत शतn के हां/नह0 अनुपालन मA ह।ै B या (cid:30)हि(cid:25)थत/(cid:30)सं(cid:25) कृत क(cid:21) जाने वाली साम@ी क(cid:21) ऐसी हां/नह0 शतl िव‘मान ह 3या िव‘मान होन ेक(cid:21) संभावना ह ैिजससे पया(cid:13)वरण पर (cid:30)ितकूल शी(cid:129) या िवलंिबत (cid:30)भाव पड़ता ह।ै B या/(cid:30)हि(cid:25)थत/(cid:30)सं(cid:25) कृत क(cid:21) जाने वाली साम@ी क(cid:21), (cid:1)कसी हां/नह0 ऐसे उपाय (cid:22)ारा जो (cid:1)कसी ऐसी अ(cid:8) य साम@ी को (अथा(cid:13)त ् िन8ालन) उ= प(cid:8) न करने मA समथ(cid:13) ह ै जो पया(cid:13)वरण िवषाB तता रखती ह,ै शतl िव‘मान ह3 (या िव‘मान होने क(cid:21) संभावना ह)ै । 17. कोई अ(cid:8) य संगत जानकारी 18. िनयम के अनुसार संलi नक) क(cid:21) सूची नाम और ह(cid:25)त ा8र पदनाम तारीख : (cid:25) थान :¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 15 (cid:15)(cid:15)(cid:15)(cid:15)पपपप(cid:13)(cid:13)(cid:13)(cid:13)----IIIIIIIIIIII [कृपया िनयम 13(4) दखे ]A ििििववववििििननननममममाााातत(cid:4)(cid:4)तत(cid:4)(cid:4) ाााा;;;; ककककेेेे ििििललललएएएए पपपपजजंंजजंं ीीीीककककररररणणणण हहहहेतेतेतेत ुु ुुआआआआववववेदेदेदेदनननन पपपप(cid:13)(cid:13)(cid:13)(cid:13) ............................... ...................... ...................... स े(अिधuाता का नाम और पूण (cid:13)पता) सेवा म,A सद(cid:25)य सिचव, ................... (cid:30)दषू ण िनयं(cid:19)ण बोड(cid:13)/(cid:30)दषू ण िनयं(cid:19)ण सिमित .................................... .................................... महोदय, म/3हम (cid:23)लाि(cid:25)टक अपिश(cid:29) (cid:30)बंधन िनयम, 2011 के अतं ग(cid:13)त पंजीकरण हते ु आवेदन करता {/ंह3 भभभभाााागगगग ---- कककक सामा(cid:8)य 1.(क) इकाई का नाम और अवि(cid:25)थित (ख) इकाई का पता (ग) उ=पादक) (cid:22)ारा िविनमा(cid:13)ण और (cid:30)युK क(cid:21) जाने वाली कfे माल क(cid:21) आपूWत हते ु अपेि8त पंजीकरण : (घ) िविनमाण(cid:13) 8मता (ङ) नवीकरण के मामले म,A िपछली पंजीकरण संtया और पंजीकरण क(cid:21) तारीख 2. Bया यह इकाई रा_य सरकार/संघ रा_य 8े(cid:19) क(cid:21) डीआईसी/डीसीएसएसआई म A पंजीकृत ह?ै य(cid:1)द हां, तो पंजीकरण क(cid:21) (cid:30)ित संल| करA । 3.(क) प.रयोजना पर िनवेश क(cid:21) गई कुल पूंजी16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (ख) उ=पादन शुI करने का वष(cid:13) 4.(क) उ=पाद) और उप-उ=पाद) क(cid:21) सूची और (cid:30)मा(cid:19)ा (ख) उ=पादक) क(cid:21) सूची और उ=पादक) को आपूWत (cid:1)कए गए कf ेमाल क(cid:21) (cid:30)मा(cid:19)ा 5. इन िनयम) के अनुपालन क(cid:21) ि(cid:25)थित नाम और ह(cid:25)ता8र पदनाम ितिथ : (cid:25)थान :¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 17 (cid:15)(cid:15)(cid:15)(cid:15)पपपप(cid:13)(cid:13)(cid:13)(cid:13)----IIIIVVVV [िनयम 17 (1) दखे (cid:4)] शशशशहहहहररररीीीी (cid:25)(cid:25)(cid:25)(cid:25)थथथथााााननननीीीीयययय ििििननननककककाााायययय ककककोोोो ससससििुुििुुववववधधधधाााा ककककेेेे (cid:15)(cid:15)(cid:15)(cid:15)चचचचााााललललननननकककक::::ाााा (cid:4)(cid:4)(cid:4)(cid:4)FFFFाााारररराााा (cid:15)(cid:15)(cid:15)(cid:15)(cid:25)(cid:25)(cid:25)(cid:25)ततततततुुततुु कककक<<<< जजजजाााानननन ेे ेेववववााााललललीीीी ववववाााा@@@@षषषषकककक (cid:8)(cid:8)(cid:8)(cid:8)ररररपपपपोोोोटटटट(cid:4)(cid:4)(cid:4)(cid:4) ककककाााा (cid:15)(cid:15)(cid:15)(cid:15)पपपप(cid:13)(cid:13)(cid:13)(cid:13) (cid:8)(cid:8)(cid:8)(cid:8)ररररपपपपोोोोGGGGटटटटगगगग कककक<<<< अअअअववववििििधधधध:::: (1) शहर/नगर और रा_य का नाम : (2) जनसंtया (3) वग(cid:13) (cid:1)क.मी. म A8े(cid:19) (4) शािमल (cid:1)कए गए वाडn क(cid:21) संtया (5) शहरी (cid:25)थानीय िनकाय का नाम और पता (दरू भाष/फैBस/ई-मेल) (6) सुिवधा के (cid:30)चालनकJा(cid:13) का नाम और पता (7) सुिवधा के (cid:30)भारी अिधकारी का नाम (दरू भाष/फैBस/मोबाइल/ई-मेल) (8) 8मता : (9) (cid:23)लाि(cid:25)टक अपिश(cid:29) के (cid:30)बंधन हते ु (cid:30)युK (cid:30)ौ‘ोिग(cid:1)कया ं: (10) (cid:30)(cid:25)तुत .रपोट(cid:13) के वष(cid:13) के दौरान (cid:30)ा/ (cid:23)लाि(cid:25)टक अपिश(cid:29) क(cid:21) (cid:30)मा(cid:19)ा (11) (cid:30)सं(cid:25)कृत (cid:23)लाि(cid:25)टक अपिश(cid:29) क(cid:21) (cid:30)मा(cid:19)ा (टन) म)A : - पुनच(cid:13)(cid:1)+त (cid:23)लाि(cid:25)टक अपिश(cid:29) (टन म)A - (cid:30)सं(cid:25)कृत (cid:23)लाि(cid:25)टक अपिश(cid:29) (टन म)A - उपयोग म Aलाया गया (टन म)A18 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (12) खJा (cid:25)थल) म A अंितम िनपटान हते ु भेजे गए बेकार/अ(cid:25)वीकृत अपिश(cid:29)) क(cid:21) (cid:30)मा(cid:19)ा : (13) उस खJा सुिवधा का Nयौरा जहां बेकार/अ(cid:25)वीकृत अपिश(cid:29)) को अंितम िनपटान हते ु भेजा गया ह ै: - पता - दरू भाष (14) सहमित या पंजीकरण के दौरान य(cid:1)द कोई पया(cid:13)वरणीय शत (cid:13) िविनTद(cid:29) क(cid:21) गई हो तो उसके अनुपालन क(cid:21) ि(cid:25)थित संल| करA। (cid:30)चालनकJा (cid:13)के ह(cid:25)ता8र (cid:1)दनांक: (cid:25)थान:¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 19 (cid:15)(cid:15)(cid:15)(cid:15)पपपप(cid:13)(cid:13)(cid:13)(cid:13)----v [िनयम 17(2) दखे A] शशशशहहहहररररीीीी (cid:25)(cid:25)(cid:25)(cid:25)थथथथााााननननीीीीयययय ििििननननककककाााायययय FFFFाााारररराााा (cid:15)(cid:15)(cid:15)(cid:15)(cid:25)(cid:25)(cid:25)(cid:25)ततततततुुततुु कककक<<<< जजजजाााानननन ेे ेेववववााााललललीीीी (cid:31)(cid:31)(cid:31)(cid:31)ललललाााािििि(cid:25)(cid:25)(cid:25)(cid:25)टटटटकककक अअअअपपपपििििशशशश2222 (cid:15)(cid:15)(cid:15)(cid:15)बबबबंधंधंधंधनननन ससससबबंंबबंं धधंंधधंं ीीीी ववववाााा@@@@षषषषकककक (cid:8)(cid:8)(cid:8)(cid:8)ररररपपपपोोोोटटटट(cid:4)(cid:4) (cid:4)(cid:4) ककककाााा (cid:15)(cid:15)(cid:15)(cid:15)पपपप(cid:13)(cid:13)(cid:13)(cid:13) (cid:15)(cid:15)(cid:15)(cid:15)(cid:25)(cid:25)(cid:25)(cid:25)ततततततुुततुु ककककररररनननन ेे ेेकककक<<<< अअअअववववििििधधधध : (1) शहर/नगर और रा_य का नाम : (2) जनसंtया (3) वग(cid:13)(cid:1)कलोमीटर म A8े(cid:19) (4) शहरी (cid:25)थानीय िनकाय का नाम और पता टेलीफोन सं. फैBस सं. ई-मेल: (5) 8े(cid:19)ािधकार के अंतग(cid:13)त 8े(cid:19) म Aवाडn क(cid:21) कुल संtया (6) 8े(cid:19)ािधकार के अंतग(cid:13)त 8े(cid:19) से वष(cid:13) के दौरान एकि(cid:19)त (cid:1)कए गए (cid:23)लाि(cid:25)टक अपिश(cid:29) क(cid:21) मा(cid:19)ा (टन म)A (7) वष(cid:13) के दौरान पुनच(cid:13)+ण हते ु भेजे गए (cid:23)लाि(cid:25)टक अपिश(cid:29) क(cid:21) मा(cid:19)ा (टन म)A (8) वष(cid:13) के दौरान (cid:30)सं(cid:25)करण हते ु भेजे गए (cid:23)लाि(cid:25)टक अपिश(cid:29) क(cid:21) मा(cid:19)ा (टन म)A (9) वष(cid:13) के दौरान उपयोग हते ु भेजे गए (cid:23)लाि(cid:25)टक अपिश(cid:29) क(cid:21) मा(cid:19)ा (टन म)A (10) वष(cid:13) के दौरान भू-भराव (cid:25)थल) को भेजे गए बेकार/अ(cid:25)वीकृत (cid:23)लाि(cid:25)टक अपिश(cid:29) क(cid:21) मा(cid:19)ा (टन म)A (11) (cid:23)लाि(cid:25)टक अपिश(cid:29) के (cid:30)सं(cid:25)करण और िनपटान हते ु (cid:30)युK (cid:30)=येक सुिवधा का Nयौरा ससससििुुििुुववववधधधधाााा----I i. (cid:30)चालक का नाम ii. टेलीफोन नंबर/मोबाइल नंबर सिहत पता iii. 8मता20 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] iv. (cid:30)युK (cid:30)ौ‘ोिगक(cid:21) v. पंजीकरण संtया vi. पंजीकरण क(cid:21) वैधता (तक) ससससििुुििुुववववधधधधाााा----II i. (cid:30)चालक का नाम ii. टेलीफोन नंबर/मोबाइल नंबर सिहत पता iii. 8मता iv. (cid:30)युK (cid:30)ौ‘ोिगक(cid:21) v. पंजीकरण संtया vi. पंजीकरण क(cid:21) वैधता (तक) (12) 8े(cid:19)ािधकार के अंतग(cid:13)त 8े(cid:19) म Aघर) क(cid:21) कुल संtया (13) घर-घर जाकर (cid:1)कए गए एक(cid:19)ण म Aशािमल घर) क(cid:21) संtया (14) 8े(cid:19)ािधकार के अंतग(cid:13)त 8े(cid:19) म A वािणि_यक सं(cid:25)थाE और सं(cid:25)थान) क(cid:21) कुल संtया - वािणि_यक सं(cid:25)थाएं - सं(cid:25)थान (15) (cid:30)=येक सं(cid:25)था/सं(cid:25)थान म A जाकर एक(cid:19)ण के िलए शािमल वािणि_यक सं(cid:25)थाE और सं(cid:25)थान) क(cid:21) संtया - वािणि_यक सं(cid:25)थाएं - सं(cid:25)थान (16) घर-घर जाकर एक(cid:19)ण एजAिसय) के Nयौरे सिहत 8े(cid:19)ािधकार के अंतग(cid:13)त 8े(cid:19) म A(cid:23)लाि(cid:25)टक अपिश(cid:29) के (cid:30)बंधन हेतु तैयार (cid:1)कए गए तं(cid:19)) का सारांश (17) 8े(cid:19)ािधकार के अंतग(cid:13)त 8े(cid:19) म A उ=प- (cid:23)लाि(cid:25)टक अपिश(cid:29) के (cid:30)बंधन हते ु तैयार क(cid:21) गई अवसंरचना का Nयौरा संल| करA (18) अपेि8त अवसंरचना, य(cid:1)द कोई हो, के औिच=य सिहत उसका Nयौरा संल| करA (19) 8े(cid:19)ािधकार के अंतग(cid:13)त 8े(cid:19) म Aअिभ^ात मिलन बि(cid:25)तय) क(cid:21) संtया (20) अपिश(cid:29) (cid:30)बंधन सुिवधाE से युK मिलन बि(cid:25)तय) क(cid:21) संtया: (21) Nयौरा द A: गली क(cid:21) सफाई, अपिश(cid:29) के ि(cid:22)तीयक भंडारण, प.रवहन, (cid:30)सं(cid:25)करण और िनपटान सिहत एक(cid:19)ण हते ु तैनात क(cid:21) गई शहरी (cid:25)थानीय िनकाय) क(cid:21) िनजी जनशिK ।¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 21 (22) Nयौरा द A: गली क(cid:21) सफाई, अपिश(cid:29) के ि(cid:22)तीय भंडारण, प.रवहन, (cid:30)सं(cid:25)करण और िनपटान सिहत एक(cid:19)ण हते ु तैनात क(cid:21) गई ठेकेदार/@ािहय) क(cid:21) जनशिK । (23) िवJीय बा>यताE, सिहत इन िनयम) के उपबंध) के अनुपालन म A शहरी (cid:25)थानीय िनकाय (cid:22)ारा अनुभव क(cid:21) जा रही क.ठनाइय), य(cid:1)द कोई ह), का उ(cid:3)लेख करA (24) Bया शहर म A ठोस अपिश(cid:29) (cid:30)बंधन पGितय) म A सुधार करने के िलए काय(cid:13) योजना तैयार क(cid:21) गई ह?ै य(cid:1)द हां तो ((cid:30)ित संल| करA) संशोधन क(cid:21) तारीख : मुtय काय(cid:13)कारी अिधकारी/नगर आयुK/काय(cid:13)कारी अिधकारी/ मुtय अिधकारी के ह(cid:25)ता8र (cid:1)दनांक: (cid:25)थान: [फा.सं.17-2/2001-एचएसएमडी] िव”oनाथ िस(cid:8)हा, संयुK सिचव MINISTRY OF ENVIRONMENT, FOREST AND CLIMATE CHANGE NOTIFICATION New Delhi, the 25th May, 2015 G.S.R. 423(E).―Whereas, by a notification of the Government of India in the Ministry of Environment and Forests number S.O. 249(E), dated the 4th February, 2011, erstwhile, the Central Government, with an objective to improve plastic waste management system, framed the Plastic Waste (Management & Handling) Rules, 2011 for restricting the manufacture and use of plastic carry bags and for setting up of plastic waste management system by the municipal authorities; And whereas an appraisal of implementation has revealed that desired results have not been achieved by the prescribed authorities due to various reasons and a need was felt to revisit these rules for the protection of public health and environment; And whereas there is need to give thrust on plastic waste minimization, source segregation, recycling, involving waste pickers, recyclers and waste processors in collection of plastic waste fraction either from households or any other source of its generation or intermediate material recovery facility and adopt polluter’s pay principle for the sustainability of the waste management system; Now, Therefore, the following draft of certain rules, which the Central Government proposes to make in exercise of the powers conferred by the sections 3, 6 and 25 of the Environment (Protection) Act, 1986 (29 of 1986) and in supersession of the Plastic Waste (Management & Handling) Rules, 2011 except as requisite things done or omitted to be done before such supersession are hereby published for the information of public likely to be affected thereby; and the22 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] notice is hereby given that the said draft rules shall be taken into consideration on or after the expiry of a period of sixty days from the date on which copies of this notification as published in the Gazette of India are made available to public; The objections or suggestions to the draft rules, if any, may be addressed, within the period so specified, to the Secretary, Ministry of Environment and Forest and Climate Change, Indira Paryavaran Bhawan, Jor Bagh Road, Aliganj, New Delhi-110 003 or electronically at the e-mail address of the Ministry bnsinha@gov.in, shard.sapra@nic.in; The objections and suggestions which may be received from any person with respect to the said draft rules before the expiry of the period so specified shall be considered by the Central Government. DRAFT RULES 1. Short title and commencement.- (1) These rules shall be called the Plastic Waste Management Rules, 2015. (2) Save as otherwise provided in these rules, they shall come into force on the date of their final publication in the Official Gazette. 2. Application.- (1) These rules shall apply to every waste generator, urban local body, Gram Panchayat, manufacturer and producer. (2) The rule 4 shall not apply to the export oriented units or units in special economic zones, notified by the Central Government, manufacturing their products against an order for export: Provide that this exemption shall not apply to units engaged in packaging of gutkha, tobacco and pan masala and also to any surplus or rejects, left over products and the like. 3. Definitions.- In these rules, unless the context otherwise requires.- (a) “Act” means the Environment (Protection) Act, 1986 (29 of 1986); (b) “carry bags” mean bags made from plastic material, used for the purpose of carrying or dispensing commodities but do not include bags that constitute or form an integral part of the packaging in which goods are sealed prior to use; (c) "commodity" means tangible item that may be bought or sold and includes all marketable goods or wares; (d) “compostable plastics” mean plastic that undergoes degradation by biological processes during composting to yield CO , water, inorganic compounds and biomass at a rate consistent with other known compostable 2 materials, excluding conventional petro-based plastics, and does not leave visible, distinguishable or toxic residue; (e) “consent" means the consent to establish and operate from the concerned State Pollution Control Board or Pollution Control Committee granted under the Water (Prevention and Control of Pollution) Act, 1974 (6 of 1974), and the Air (Prevention and Control of Pollution) Act, 1981 (14 of 1981); (f) “disintegration” means the physical breakdown of a material into very small fragments; (g) “extended producer’s responsibility (EPR)” means the responsibility of a producer for the environmentally sound management of the product until the end of its life; (h) “food-stuffs” mean ready to eat food products, fast food, processed or cooked food in liquid, powder, solid or semi-solid form; (i) “facility” means the premises used for recycling, processing and disposal of plastic waste; (j) “institutional generator” means and includes occupier of the institutional buildings such as building occupied by Central Government Departments, State Government Departments, public or private sector companies, hospitals, schools, colleges, universities or other places of education, organisation, academy, hotels and restaurants; (k) “manufacturer” means and include a person or unit or agency engaged in production of plastic to be used as raw material by the producer. (l) “multilayered packaging” means any material used or to be used for packaging and has a combination of more than one layer of materials such as paper, paper board, polymeric materials, metalised layers or aluminiumfoil, either in the form of a laminate or co-extruded structure;¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 23 (m) “plastic” means material which contains as an essential ingredient a high polymer such as polyethylene terephthalate, high density polyethylene, Vinyl (PVC), low density polyethylene, polypropylene, polystyrene resins, multi-materials like acrylonitrile butadiene styrene (ABS), polyphenylene oxide (PPO), polycarbonate (PC), Polybutylene terephthalate (PBT)and which at some stage in its processing into finished products can be shaped by flow; (n) “plastic sheet” meansand includes abroad, thin, usually rectangular mass or piece of plastic; (o) “plastic waste” means any product made of plastic which have been discarded after use or after their intended life is over; (p) “prescribed authority” means the authorities specified in rule 12; (q) “producer” means persons engaged in manufacture of carry bags or multilayered packaging or plastic sheets or like, and includes industries or individuals using plastic sheets or like or covers made of plastic sheets or multilayered packaging for packaging or wrapping the commodity; (r) "registration” means registration with the State Pollution Control Board or Pollution Control Committee concerned, as the case may be; (s) “street vendor” shall have the same meaning as assigned to it in clause (l) of sub-section (1) of Section 2 of the Street Vendors (Protection of Livelihood and Regulation of Street Vending) Act, 2014 (7 of 2014); (t) “urban local body” means municipal corporation, municipality, nagarpalika, nagarnigam, nagar panchayat, municipal council including notified area committee (NAC), or any other local body constituted under the relevant statutes and, where the management of plastic waste is entrusted to such agency; (u) “virgin plastic” means plastic material which has not been subjected to use earlier and has also not been blended with scrap or waste; (v) “waste generator” means and includes every person or group of persons or institution, residential and commercial establishments including Indian Railways and Defense Cantonments which generate plastic waste; (w) “waste management” means the scientific reduction, re-use, recovery, recycling, composting or disposal of plastic waste; (x) “waste pickers” mean individuals or groups of individuals voluntarily engaged in the picking of recyclable plasticwaste. 4. Conditions.- The manufacture, stocking, distribution, sale and use of carry bags, plastic sheets or like, or cover made of plastic sheet and multilayered packaging, shall be subject to the following conditions, namely:- a) carry bags shall either be in natural shade (colourless), which is without any added pigments or made using only those pigments and colourants which are in conformity with Indian Standard : IS 9833:1981 titled as “List of pigments and colourants for use in plastics in contact with foodstuffs, pharmaceuticals and drinking water”, as amended from time to time; b) recycled plastic or products made of recycled plastic shall not be used for storing, carrying, dispensing or packaging food stuffs; c) carry bag made of virgin or recycled plastic, shall not be less than 50 microns in thickness; d) plastic sheet or like, which is not an integral part of multilayered packaging or cover made of plastic sheet used for packaging or wrapping the commodityshall not be less than 50microns in thickness; e) the manufacturer shall not sell or provide or arrange plastic to be used as raw material to a producer, not having valid registration from the concerned State Pollution Control Boards or Pollution Control Committee; f) sachets using plastic material shall not be used for storing, packing or selling gutkha, tobacco and pan masala; g) recycled carry bags shall conform to the Indian Standard: IS 14534:1998 titled as Guidelines for Recycling of Plastics, as amended from time to time; h) carry bags made from compostable plastics shall conform to the Indian Standard: IS/ISO 17088:2008 titled as Specifications for Compostable Plastics, as amended from time to time; and i) plastic material, in any form, shall not be used in any package for packaging gutkha, pan masala and tobacco in all forms.24 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 5. Plastic waste management.- (1)The plastic waste management by the urban local bodies in their respective jurisdiction shall be as under:- a. Wet bio–degradable waste, dry recyclable and combustible wastes and domestic hazardous wastes shall be segregated at source in accordance with the Solid Waste Management Rules, 2015. b. Plastic waste, which can be recycled, shall be channelized to registered plastic waste recycler and recycling of plastic shall conform to the Indian Standard: IS 14534:1998 titled as Guidelines for Recycling of Plastics, as amended from time to time. (2) Urban local bodies shall encourage the use of plastic waste by adopting suitable technology such as in road construction, for energy recovery, etc. in compliance with the standards andpollution control norms specified by the prescribed authority in this regard. (3) Processing and disposal of plastic including thermo-set plastic shall be as per the guidelines issuedby the Central Pollution Control Board from time to time. (4) The inert from recycling or processing facilities of plastic waste shall be disposed of in compliance with the Solid WasteManagement Rules, 2015. 6. Responsibility of urban local body.- (1) Every urban local body shall be responsible for development and setting up of infrastructure for segregation, collection, storage, transportation, processing and disposal of the plastic waste either onits own or by engaging agencies or producers. (2) The urban local body shall be responsible for setting up, operationalisation and co-ordination of the waste management system and for performing the associated functions, namely:- (a) Ensuring segregation, collection, storage, transportation, processing and disposal of plastic waste; (b) ensuring that no damage is caused to the environment during this process; (c) ensuring channelization of recyclable plastic waste fraction to recyclers; (d) ensuring processing and disposal on non-recyclable fraction of plastic waste in accordance with the guidelines issued by the Central Pollution Control Board; (e) creating awareness among all stakeholders about their responsibilities; (f) engaging civil societies or groups working with waste pickers; and (g) ensuring that open burning of plastic waste does not take place. (3) The urban local body for setting up of system for plastic waste shall seek assistance of producers and such system shall be set up within one year from the dateof final publicationof these rules in the Official Gazette. 7. Responsibility of Gram Panchayat.- (1) Everygram panchayat either on its own or by engaging an agency shall set up, operationalise and co-ordinate for waste management in the rural area under their control and for performing the associated functions, namely.- (a) ensuring segregation, collection, storage, transportation, processing and disposal of plastic waste; (b) ensuring that no damage is caused to the environment during this process; (c) ensuring channelization of recyclable plastic waste fraction to recyclers having valid registration; (d) creating awareness among all stakeholders about their responsibilities; and (e) ensuring that open burning of plastic waste does not take place. 8. Responsibility of waste generator:- (1) The waste generator shall- (a) take steps to minimize generation of plastic waste and segregate plastic waste at source in accordance with the Solid Waste Management Rules, 2015; (b) not litter the plastic waste and ensure segregated storage of waste at source and handover segregated waste to waste pickers, registered recyclers or waste collection agencies; (2) All institutional generators of plastic waste, shall segregate and store the waste generated by them in accordance with the Solid Waste Management Rules, 2015 and handover segregated wastes to authorized waste processing or disposal facilities or deposition centres eitheron its own or through the authorized waste collection agency.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 25 (3) All waste generators shall pay such user fee or charge as may be specified in the bye-laws of the urban local bodies for plastic waste management such as waste collection or operation of the facility thereof, etc.; (4) Every person responsible for organising an event in open space, which involves service of food stuff in plastic or multilayered packaging shall segregate and manage the waste generated during such events in accordance with the Solid Waste Management Rules, 2015 9. Responsibility of producers.- (1) The producers, within a period of six months from the date of publication of these rules, shall work out modalities for waste collection system based on Extended Producers Responsibility and involving State Urban Development Departments, either individually or collectively, through their own distribution channel or through the urban local body concerned. (2) The producer, within a period of three years from the date of final publication of these rules, shall stop use of multilayered packaging and switch over to use of plastic which is recyclable or compostable, for packaging commodity. (3) The producer, within a period of three months from the date of final publication of these rules in the Official Gazette shall apply to the Pollution Control Board or the Pollution Control Committee, as the case may be, of the States or the Union Territories concerned, for grant of registration. (4) No producer shall on and after the expiry of a period of one year from the date of final publication of these rules in the Official Gazette manufacture or use any plastic or multilayered packaging for packaging of commodities without registration from the concerned State Pollution Control Board or the Pollution Control Committees. (5) Every producer shall maintain a record of details of the person engaged in supply of plastic used as raw material to manufacture carry bags or plastic sheet or like or cover made of plastic sheet or multilayered packaging. 10. Protocols for compostable plastic materials.-Determination of the degree of degradability and degree of disintegration of plastic material shall be as per the protocols of the Indian Standards listed in ScheduleI to these rules. 11. Marking or labelling.- (1) Each plastic carry bag and multilayered packaging shall have the following information printed in English and in language being used in the State or the Union Territory, namely:- (a) name, registration number of the manufacturer and thickness in case of carry bag; and (b) name and registration number of the manufacturer in case of multilayered packaging. (2) Each recycled carry bag shall bear a label or a mark “recycled” as shown below and shall conform to the Indian Standard: IS 14534: 1998 titled as “Guidelines for Recycling of Plastics”, as amended from time to time; NOTE: PET-Polyethylene terephthalate, HDPE-High density polyethylene, V-Vinyl (PVC), LDPE- Low density polyethylene, PP-Polypropylene, PS-Polystyrene and Other means all other resins and multi-materials like ABS (Acrylonitrile butadiene styrene), PPO (Polyphenylene oxide), PC (Polycarbonate), PBT (Polybutylene terephalate) etc. (3) Each carry bag made from compostable plastics shall bear a label “compostable” and shall conform to the Indian Standard : IS/ISO 17088:2008 titled as Specifications for “Compostable Plastics”. 12. Prescribed authority.- (1) The State Pollution Control Board and Pollution Control Committee in respect of a Union Territory shall be the authority for enforcement of the provisions of these rules relating to registration, manufacture of plastic products and multilayered packaging, processing and disposal of plastic wastes.26 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (2) The concerned Secretary-in-charge of Urban Development of the State or a Union Territory shall be the authority for enforcement of the provisions of these rules relating to waste management by waste generator, use of plastic carry bags, plastic sheets or like, covers made of plastic sheets and multilayered packaging. (3) The concerned Gram Panchayat shall be the authority for enforcement of the provisions of these rules relating to waste management by the waste generator, use of plastic carry bags, plastic sheets or like, covers made of plastic sheets and multilayered packaging in the rural area of the State or a Union Territory. (4) The authorities referred to in sub-rules (1) to (3) shall take the assistance of the District Magistrate or the Deputy Commissioner within the territorial limits of the jurisdiction of the concerned district in the enforcement of the provisions of these rules. 13. Registration of producer, recyclers and manufacturer.- (1) No person shall manufacture carry bags or recycle plastic bags or multilayered packaging unless the person has obtained a registration from the State Pollution Control Board or the Pollution Control Committee of the Union Territory concerned, as the case may be, prior to the commencement of production; (2) Every producer shall , for the purpose of registration or for renewal of registration, make an application to the State Pollution Control Board or the Pollution Control Committee of the Union Territory concerned, in Form I. (3) Every person recycling or processing waste or proposing to recycle or process plastic waste shall make an application to the the State Pollution Control Board or the Pollution Control Committee , for grant of registration or renewal of registration for the recycling unit, in Form II. (4) Every manufacturer engaged in manufacturer of plastic to be used as raw material by the producer shall make an application to the State Pollution Control Board or the Pollution Control Committee of the Union Territory concerned, for the grant of registration or for the renewal of registration, in Form III. (5) The State Pollution Control Board or the Pollution Control Committee shall not issue or renew registration to plastic waste recycling or processing units unless the unit possesses a valid consent under the Water (Prevention and Control of Pollution) Act, 1974 (6 of 1974) and the Air (Prevention and Control of Pollution) Act, 1981 (14 of 1981) along with a certificate of registration issued by the District Industries Centre or any other Government agency authorised in this regard. (6) The State Pollution Control Board or the Pollution Control Committeeshall not renew registration of producer unless the producer possesses and action plan endorsed by the Secretary in charge of Urban Development of the concerned State or Union Territory for setting of plastic waste management system. (7) On receipt of the application complete in all respects for the registration for recycling or processing of plastic waste under sub-rule (3), the State Pollution Control Board may, after such inquiry as it considers necessary and on being satisfied that the applicant possesses appropriate facilities, technical capabilities and equipment to handle plastic waste safely, may grant registration to the applicant on fulfilment of the conditions as may be laid down in terms of registration. (8) Every State Pollution Control Board or Pollution Control Committee shall take a decision on the grant of registration within ninety days of receipt of an application whcihis complete in all respects. (9) The registration granted under this rule shall initially be valid for a period of one year, unless revoked, suspended or cancelled and shall subsequently be granted for three years. (10) State Pollution Control Board or the Pollution Control Committees shall not revoke, suspend or cancel registration without providing the opportunity of a hearing to the producer or person engaged in recycling or processing of plastic wastes. (11) Every application for renewal of registration shall be made at least one hundred twenty days before the expiry of the validity of the registration certificate. 14. Responsibility of retailers and street vendors- (1) Retailers or street vendors shall not sell or provide commodities to consumer in carry bags or plastic sheet or multilayered packaging, which are not manufactured and labelled or marked, as per prescribed under these rules. (2) Every retailers or street vendors selling or providing commodities in, plastic carry bags or multilayered packaging or plastic sheets or like or covers made of plastic sheets which are not manufactured or labelled or marked in accordance with these rules shall be liable to pay such fines as specified under the bye-laws of the urban local bodies.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 27 15. Explicit pricing of carry bags.- (1) No carry bags shall be made available free of cost by retailers to consumers. (2) The concerned urban local body may by notification determine the minimum price for carry bags depending upon their quality and size which covers their material and waste management costs in order to encourage their re-use so as to minimize plastic waste generation. (3) The urban local body by notification determine the manner of depositing with it the payment made by the customers to the retailers for carry bags under sub-rule (2). (4) The urban local body shall utilize the amount paid by the customers for the carry bags exclusively for the sustainability of the waste management system within their jurisdictions. 16. State Level Advisory Body.- (1) the State government or the Union Territory shall, for the purpose of effective monitoring of implementation of these rules, constitute a State Level Advisory Committee consisting of the following persons, namely:- (a) the Secretary, Department of Urban Development - Chairman (b) one expert from State Department of Environment - Member (c) one expert from State Pollution Control Board or Pollution Control Committee - Member (d) one expert from Urban Local Body - Member (e) one expert from Non-Governmental Organisation - Member (f) one expert from the field of Industry - Member and (g) one expert from the field of academic institution - Member (2) The State Level Advisory Body shall meet at least once in a year and may invite experts, if it considers necessary. 17. Annual reports.- (1) Every person engaged in recycling or processing of plastic waste shall prepare and submit an annual report in Form-IV to the urban local body concerned under intimation to the concerned State Pollution Control Board or Pollution Control Committee by the 30th day of April of every year. (2) Every urban local body shall prepare and submit anannual report in Form –V to the concerned Secretary-in- charge of the Urban Development Department under intimation to the concerned State Pollution Control Board or Pollution Control Committee by the 30th day of July of every year. (3) Each State Pollution Control Board or Pollution Control Committee shall prepare and submit anannual report to the Central Pollution Control Board on the implementation of these rules by the 30th day of September of every year. (4) The Central Pollution Control Board shall prepare a consolidated annual report on the use and management of plastic waste and forward it to the Central Government along with its recommendations before the 30th day of December every year. SCHEDULE-I [See rule 10] 1. IS/ISO 14851: 1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium-Method by measuring the oxygen demand in a closed Respirometer 2. IS/ISO 14852: 1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium-Method by analysis of evolved carbon dioxide 3. IS/ISO 14853: 2005 Plastics- Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system-Method by measurement of biogas production 4. IS/ISO 14855-1: 2005 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions-Method by analysis of evolved carbon dioxide (Part-1 General method) 5. IS/ISO 14855-2: 2007 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions-Method by analysis of evolved carbon dioxide (Part-2: Gravimetric measurement of carbon dioxide evolved in a laboratory- scale test)28 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] 6. IS/ISO 15985: 2004 Plastics- Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic digestion conditions- Methods by analysis of released biogas 7. IS/ISO 16929: 2002 Plastics- Determination of degree of disintegration of plastic materials under defined composting conditions in a pilot - scale test 8. IS/ISO 17556: 2003 Plastics- Determination of ultimate aerobic biodegradability in soil by measuring the oxygen demand in a Respirometer or the amount of carbon dioxide evolved 9. IS/ISO 20200:2004 Plastics- Determination of degree of disintegration of plastic materials under simulated composting conditions in a laboratory - scale test FORM - I [See rules 13 (2)] APPLICATION FOR REGISTRATION FOR PRODUCERS From: .......................................... …………………………… …………………………….(Name and full address of the occupier) To The Member Secretary, .............………. Pollution Control Board/Pollution Control Committee ……………………………………. ……………………………………. Sir, I/We hereby apply for registration under rule 9 of the Plastic Waste Management Rules, 2015 PART – A GENERAL 1.(a) Name and location of the unit (b) Address of the unit (c) Registration required for manufacturing of: (i) Carry bags: (ii) Multilayered plastics (d) Manufacturing capacity (e) In case of renewal, previous registration number and date of registration 2. Is the unit registered with the DIC/DCSSI of the State Government/Union Territory? If yes, attach a copy. 3.(a) Total capital invested on the project (b) Year of commencement of production 4. (a) List and quantum of products and by-products (b) List and quantum of raw materials used 5. Furnish a flow diagram of manufacturing process showing input and output in terms of products and waste generated including for captive power generation and water. 6. Minimum sizes and thickness of carry bags to be manufactured 7. Status of compliance with these rules PART – B PERTAINING TO LIQUID EFFLUENT AND GASEOUS EMISSIONS 8. (a) Does the unit have a valid consent under the Water (Prevention and control of Pollution) Act, 1974 (6 of 1974)? If yes, attach a copy¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 29 (b) Does the unit have a valid consent under the Air (Prevention and Control of Pollution) Act, 1981 (14 of 1981)? If yes, attach a copy PART – C PERTAINING TO WASTE 9. Solid Wastes: (a) Total quantum of waste generated (b) Mode of storage within the plant (c) Provision made for disposal of wastes 10. Attach/ Provide list of person supplying plastic to be used as raw material to manufacture carry bags or plastic sheet of like or multilayered packaging Name and Signature Designation Date : Place : FORM - II [see rule 13 (3)] APPLICATION FORM FOR REGISTRATION OF UNITS ENGAGED IN PROCESSING OR RECYCLING OF PLASTIC WASTE 1. Name and Address of the unit 2. Contact person with designation, Tel./Fax /email 3. Date Commissioned 4. No. of workers (including contract labour) 5. Consents Validity a. Water (Prevention & Control of Pollution) Act, 1974; Valid up to _________________ b. Air (Prevention & Control of Pollution) Act, 1981; Valid up to_________________ 6. Authorization validity 7. Manufacturing Process Please attach a flow diagram of the manufacturing process flow diagram for each product. 8. Products and installed capacity of Products Installed capacity production (MTA) 9. Products manufactured during the Year Product Quantity last three years (as applicable) 10. Raw material consumed during Year Product Quantity the last three years (as applicable) 11. Water consumption Industrial _____________m3/day Domestic_____________m3 / day Date until which water cess has been paid (if applicable)30 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] Waste water generation as per consent Actual waste water generated (average of last 3 months) _______________m3/day Industrial ____________m3 /day Domestic ____________m3 /day Waste water treatment (provide flow diagram of Industrial the treatment scheme) Domestic Waste water discharge Quantity _____________m3/day Location _____________________ Analysis of treated waste water for pH, BOD, COD, SS, O&G, any other parameter stipulated by SPCB/PCC (attach details) 12. Air Pollution Control a. Provide a flow diagram for emission control system(s) installed for each processing unit, utilities etc. b. Details for facilities provided for control of fugitive emissions due to material handling, process, utilities etc. c. Fuel consumption Fuel Qty per day/month (i) (ii) d. Stack emission monitoring Stack attached to Emission (SPM, SO , NOx, 2 etc.) mg/Nm3 (i) (ii) e. Ambient air quality Location Results Parameters SPM, SO , NOx, 2 µg/m3 etc.) µg/m3 (i) (ii) 13. Waste Management: S No Type Category Qty. a. Waste generation in processing plastic-waste (i) (ii) (iii) b. Waste Collection and transportation (attach details) c. Waste Disposal details S Type Category Qty No (i) (ii) d. Provide details of the disposal facility, whether the facility is authorized by SPCB/SPCC e. Please attach analysis report of characterization of waste generated (including leachate test if applicable) 14. Details of plastic waste proposed to be acquired (i) Name through sale, auction, contract or import, as the (ii) Quantity required /year case may be, for use as raw material 15. Occupational safety and health aspects Please provide details of facilities 16. Remarks: Whether the unit has adequate pollution control If Yes, please furnish details systems / equipment to meet the standards of emission / effluent. Whether unit is in compliance with conditions laid Yes/No down in the said rules. Whether conditions exist or are likely to exist of Yes/No the material being handled / processed posing adverse immediate or delayed impacts on the environment.¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 31 Whether conditions exist (or are likely to exist) of Yes/No the material being handled / processed by any means capable of yielding another material (e.g. leachate) which may possess eco-toxicity. 17. Any other relevant information 18. List of enclosures as per rule Name and Signature Designation Date : Place : FORM - III [See rules 13(4)] APPLICATION FOR REGISTRATION FOR MANUFACTURERS From: .......................................... …………………………… …………………………….(Name and full address of the occupier) To The Member Secretary, .............………. Pollution Control Board/Pollution Control Committee ……………………………………. ……………………………………. Sir, I/We hereby apply for registration under the Plastic Waste Management Rules, 2011 PART – A GENERAL 1.(a) Name and location of the unit (b) Address of the unit (c) Registration required for manufacturing and supply of raw material to be used by producers : (d) Manufacturing capacity (e) In case of renewal, previous registration number and date of registration 2. Is the unit registered with the DIC/DCSSI of the State Government/Union Territory? If yes, attach a copy. 3.(a) Total capital invested on the project (b) Year of commencement of production 4. (a) List and quantum of products and by-products (b) List of producers and quantum of raw materials supplied to producers 7. Status of compliance with these rules Name and Signature Designation Date : Place :32 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] Form - IV [See rules 17 (1)] Format of Annual Report by Operator of Facility to the Urban Local Body Period of Reporting: (1) Name of the City/Town and State: (2) Population (3) Area in sq. kilometers (4) Number of wards covered (5) Name & Address of the Urban local body (Telephone/Fax/ E-mail) (6) Name and Address of operator of the facility (7) Name of officer in-charge of the facility (Telephone/Fax/Mobile/ E-mail) (8) Capacity: (9) Technologies used for management of plastic waste: (10) Quantity of plastic waste received during the year being reported upon (11) Quantity of plastic waste processed (in tons): - Plastic waste recycled (in tons) - Plastic waste processed (in tons) - Used (in tons) (12) Quantity of inert/ rejects sent for final disposal to landfill sites: (13) Details of land fill facility to which inert/ rejects were sent for final disposal: - Address -Telephone (14) Attach status of compliance to environmental conditions, if any specified during grant of Consent or registration Signature of Operator Dated : Place:¹Hkkx IIµ[k.M 3(i)º Hkkjr dk jkti=k % vlk/kj.k 33 Form - V [See rules 17(2)] FORMAT FOR ANNUAL REPORT ON PLASTIC WASTE MANAGEMENT TO BE SUBMITTED BY THE URBAN LOCAL BODY Period of Reporting: (1) Name of the City/Town and State: (2) Population (3) Area in sq. kilometers (4) Name & Address of Urban local body Telephone No. Fax No. E-mail: (5) Total Numbers of the wards in the area under jurisdiction (6) Quantity of Plastic Waste collected during the year from area under jurisdiction (in tons) (7) Quantity of plastic waste channelized for recycling during the year (in tons) (8) Quantity of plastic waste channelized for processing during the year (in tons) (9) Quantity of plastic waste channelized for use during the year (in tons) (10) Quantity of inert/rejects sent to landfill sites during the year (in tons) (11) Details of each of facilities used for processing and disposal of plastic waste Facility-I i) Name of operator ii) Address with Telephone Number/ Mobile iii) Capacity iv) Technology Used v) Registration Number vi) Validity of Registration (up to) Facility-II i) Name of operator ii) Address with Telephone Number/ Mobile iii) Capacity iv) Technology Used v) Registration Number vi) Validity of Registration (up to) (12) Total Numbers of Households in the area under jurisdiction (13) Number of households covered by door to door collection (14) Total number of commercial establishments and Institutions in the area under jurisdiction -Commercial establishments - Institutions (15) Number of commercial establishments and Institutions covered by door to door collection -Commercial establishments - Institutions (16) Summary of the mechanisms put in place for management of plastic waste in the area under jurisdiction along with the details of agencies involved in door to door collection (17) Attach details of infrastructure put in place for management of plastic waste generated in the area under jurisdiction (18) Attach details of infrastructure required, if any along with justification34 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(i)] (19) Number of slums identified in the area under jurisdiction (20) Number of slums provided with Waste Management facilities: (21) Give details of: Urban local body’s own manpower deployed for collection including street sweeping, secondary storage, transportation, processing and disposal of waste. (22) Give details of: Contractor/ concessionaire’s manpower deployed for collection including street sweeping, secondary storage, transportation, processing and disposal of waste. (23) Mention briefly, the difficulties being experienced by the urban local body in complying with provisions of these rules including the financial constrains, if any (24) Whether an Action Plan has been prepared for improving solid waste management practices in the city? If yes (attach copy) Date of revision: Signature of CEO/Municipal Commissioner/ Executive Officer/Chief Officer Date: Place: [F. No. 17-2/2001-HSMD] BISHWANATH SINHA, Jt. Secy. Printed by the Manager, Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research