Home India Ministry of Commerce and Industry Hinges Quality Control Order 2024...
Date: 26-Jul-2024 Category: Extra Ordinary State: Union Government Country: India

Hinges Quality Control Order 2024

Issued by Ministry of Commerce and Industry · DEPARTMENT FOR PROMOTION OF INDUSTRY AND INTERNAL TRADE

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

Description of the Gazette Notification

  • This gazette notification, issued by the Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade), introduces the Hinges (Quality Control) Order, 2024. This order supersedes the Hinges (Quality Control) Order, 2023.
  • The order mandates the use of the Standard Mark for various types of hinges, ensuring they conform to specified Indian Standards (IS).
  • Different implementation dates are set for general manufacturers, small enterprises, and micro-enterprises.
  • The Bureau of Indian Standards (BIS) will be the certifying and enforcing authority.
  • Penalties will be imposed for non-compliance, as per the Bureau of Indian Standards Act, 2016.

Key Changes

  • Supersession of the Hinges (Quality Control) Order, 2023, with the Hinges (Quality Control) Order, 2024.
  • Nine types of hinges are specified in the order, each with a corresponding Indian Standard.
  • Implementation date: January 1, 2025 for general manufacturers; staggered implementation dates (April 1, 2025 and July 1, 2025) for small and micro-enterprises respectively.
  • The Bureau of Indian Standards (BIS) is designated as the certifying and enforcing authority.
  • Exemption: The order does not apply to hinges manufactured domestically for export.

Impact Analysis

Manufacturers

  • Risk of penalties for non-compliance.

Consumers

  • Potentially higher prices for hinges due to increased compliance costs.

Small and Micro Enterprises

  • Need for support and guidance from the government and BIS to facilitate compliance.

Bureau of Indian Standards (BIS)

  • Responsibility for providing guidance and support to manufacturers.

Government

  • Need for effective monitoring and enforcement of the order.

Key Entities Referenced

Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade): The issuing authority of the Hinges (Quality Control) Order, 2024. Bureau of Indian Standards (BIS): The certifying and enforcing authority, responsible for issuing licenses and enforcing compliance. Bureau of Indian Standards Act, 2016: The Act under which the order is issued and which provides the legal basis for penalties for non-compliance. Micro, Small and Medium Enterprises Development Act, 2006: The Act defining small and micro enterprises, influencing the staggered implementation timeline. Hinges (Quality Control) Order, 2023: The order superseded by the Hinges (Quality Control) Order, 2024. Various Indian Standards (IS): Specific standards (e.g., IS 12817:2020, IS 1341:2018, etc.) that hinges must conform to.
Official Source Record View Original Source →
See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99 सी.जी.-डी.एल.-अ.-26072024-255769 xxxGIDHxxx CG-DLxx-xEG-I2D6E0x7x2x0 24-255769 असाधारण EXTRAORDINARY भाग II—खण् ड 3—उप-खण्ड (ii) PART II—Section 3—Sub-section (ii) प्राजधकार स ेप्रकाजित PUBLISHED BY AUTHORITY स.ं 2841] नई ददल्ली, िुक्रवार, िुलाई 26, 2024/श्रावण 4, 1946 No. 2841] NEW DELHI, FRIDAY, JULY 26, 2024/SHRAVANA 4, 1946 वाजणज्य रर उ्योगग ं्ं ालय (उ्योगग संवधनध रर आतं ररक व्य ापार जवभाग) आदेि नई ददल् ली, 26 िुलाई, 2024 का.आ. 2982(अ).—भारतीय ंानक ब् यूरयोग अजधजनयं, 2016 (2016 का 11) की धारा 16 द्वारा प्रदत् त िजतियय का प्रययोगग करते हुए, रर जिन्ि (गणु व्ा जनयं्ण) आदेि, 2023 के अजधक्रंण ं,ें ऐसे अजधक्रंण से पिल े दकए गए या दकए िाने के जलए छयोगडे गए कायों कयोग छयोगडकर, केंद्र सरकार का, भारतीय ंानक ब् यूरयोग से परांिध करने के बाद यि ंत ि दक यि िनजित ं ेंआवश् यक अववा जितकर ि, अत: एतद्द्वारा जनम्न जलजखत आदेि करती ि, नांत:- 1. सजं िप्त िी्कध रर प्रारंभ -(1) इस आदेि कयोग जिन्ि (गुणवत् ता जनयं्ण) आदेि, 2024 किा िाएगा। (2) इस आदेि ंें अन्यवा प्रावधान के जसवाय, यि आदेि 1 िनवरी, 2025 कयोग लाग ूियोगगा। 2. ंानक जिह्न का अजनवाय ध प्रययोगग–ताजलका के कॉलं (2) ंें जवजनर्दष्ध ट वस्ट् तुएं या सांान ताजलका के कॉलं (3) ं ें उजल्लजखत तदनुरूपी भारतीय ंानक के अनुरूप ि ग े तवा उन पर भारतीय ंानक ब् यूरयोग (अनुपालन ंल्ू यांकन) जवजनयं, 2018 की अनुसूिी-II के स्ट् कीं-I के अनुसार भारतीय ंानक ब्य ूरयोग के लाइसेंस के तित ंानक जिह्न लगा ियोगगा। बिते दक सूक्ष्ं, लघ ु रर ंध्यं उ्ं जवकास अजधजनयं, 2006 (2006 का 27) के तित पररभाज्त लघ ु उ्ं रर सूक्ष्ं उ्ं, ताजलका के क्रंिः कॉलं (6) रर (7) के तित संबंजधत प्रजवजि ं ें जनर्दिध जतजव स े ऐसे भारतीय ंानक का अनुपालन करेंग:े 4626 GI/2024 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] बिते दक इस आदेि ं ेंसे कुछ भी जनयाधत की िाने वाली स्ट् वदिे ंें जवजन्ंधत वस्ट् तुओं य या सांान पर लागू निह ियोगगा। 3. प्रंाणन रर प्रवतनध प्राजधकरण–उक्त ब् यरू योग ताजलका के कॉलं (2) ं ें जवजनर्दष्ध ट वस्ट् तओं यु या सांान के जलए प्रंाणन रर प्रवतधन प्राजधकरण ियोगगा। 4. उल्ल घं न के जलए पने ल्ट ी–इस आदेि के प्रावधान का उल्ल ंघन करन े वाले व् यजतिय कयोग भारतीय ंानक ब् यूरयोग अजधजनयं, 2016 के प्रावधान के तित दंजडत दकया िाएगा। ताजलका क्रं वस्ट् तु भारतीय भारतीय ंानक का िी्धक सांान्य रूप से लघ ु उ्ं के सूक्ष्ं उ्ं सं. तवा ंानक कायाधन्वयन की जलए के जलए सांान जतजव (सूक्ष्ं रर कायाधन्वयन की कायाधन्वयन जतजव की जतजव लघ ु उ्ं कयोग छयोगडकर) (1) (2) (3) (4) (5) (6) (7) 1 12817:2020 स्ट् टेनलेस स्ट् टील बट जिन् ि 2 जिन्ि 1341:2018 स्ट् टील बट जिन् ि 1 िनवरी, 2025 1 अप्रल , 2025 1 िुलाई, 3 205:1992 नॉन-फेरस ंेटल बट जिन् ि 2025 4 206 :2010 टी रर स्ट् र प जिन्ि 5 362: 1991 पा्लधयांेन्ट जिन्ि 6 3818 :1992 कन् टीनुअस (जपआनयोग) जिन्ि 7 3843:1995 स्ट् टील ब क लैल प जिन्ि 8 453:1993 डबल-एकक्टंग कस्ट्प्रंग जिन्ि 9 18297:2023 क जबनेट जिन्ि नयोगट–इस ताजलका के प्रययोगिन के जलए, भारतीय ंानक के सबं ंध ं ें िारी संियोगधन सजित उनके नवीनतं संस्ट् करण, ि सा दक भारतीय ंानक ब् यरू योग द्वारा संय-संय पर अजधसूजित दकए गए ि,ैं लाग ूि गे। [फा. सं. पी - 29026/11/2023– एलईआई] संिीव, संयुक् त सजिव MINISTRY OF COMMERCE AND INDUSTRY (Department for Promotion of Industry and Internal Trade) ORDER New Delhi, the 26th July, 2024 S.O. 2982(E).—In exercise of the powers conferred by section 16 of the Bureau of Indian Standards Act, 2016 (11 of 2016) and in supersession of the Hinges (Quality Control) Order, 2023, except as respects things done or omitted to be done before such supersession, the Central Government, after consulting the Bureau of Indian Standards, is of the opinion that it is necessary or expedient so to do in the public interest, hereby makes the following Order, namely:-[भाग II—खण् ड 3(ii)] भारत का रािप् : असाधारण 3 1. Short title and commencement. – (1) This Order may be called the Hinges (Quality Control) Order, 2024. (2) Save as otherwise provided in this Order, it shall come into force on the 1st January, 2025. 2. Compulsory use of Standard Mark.- Goods or articles specified in column (2) of the Table shall conform to the corresponding Indian Standard mentioned in column (3) of the Table and shall bear the Standard Mark under a licence from the Bureau as per Scheme-1 of Schedule-II to the Bureau of Indian Standards (Conformity Assessment) Regulations, 2018: Provided that the small enterprises and micro enterprises, as defined under the Micro, Small and Medium Enterprises Development Act, 2006 (27 of 2006) shall conform to such Indian Standards from the date specified in the corresponding entry under columns (6) and (7) of the Table respectively: Provided that nothing in this Order shall apply to goods or articles manufactured domestically for export. 3. Certification and enforcement authority.- The Bureau shall be the certifying and enforcing authority for the Goods or articles specified in column (2) of the Table. 4. Penalty for Contravention.- Any person who contravenes the provisions of this Order shall be punishable under the provisions of the Bureau of Indian Standards Act, 2016. TABLE S. No. Goods Indian Title of Date of Date of Date of or Standard Indian implementation in Implementation for Implementation Articles Standard General Small for Micro (other than Enterprises Enterprises Micro and Small Enterprises) (1) (2) (3) (4) (5) (6) (7) 1. 12817:2020 Stainless Steel Butt Hinges 2. 1341:2018 Steel Butt Hinges 3. 205:1992 Non-ferrous metal butt Hinges 4. 206 :2010 Tee and Strap Hinges 5. 362: 1991 Parliament Hinges Hinges 6. 3818 :1992 Continuous 1st 1st 1st (Piano) Hinges January, 2025 April, 2025 July, 2025 7. 3843:1995 Steel back flap Hinges 8. 453:1993 Double-acting Spring Hinges 9. 18297:2023 Cabinet Hinges Note.—For the purposes of this Table, the latest version of Indian Standards including the amendments thereof, as notified by the Bureau from time to time shall apply. [F. No. P-29026/11/2023-LEI] SANJIV, Jt. Secy. Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research