This document is the Footwear Made from All-Rubber and All-Polymeric Material and its Components Quality Control Amendment Order, 2020, issued by the Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade, Leather and Footwear Section. It was published in the Gazette of India, Extraordinary, Part II, Section 3, Subsection ii on December 4, 2020, as S.O. 4378(E). This order amends the Footwear Made from All-Rubber and All-Polymeric Material and its Components Quality Control Order, 2020, by changing the effective date. Specifically, it substitutes Sub-Paragraph 2 in Paragraph 1 of the principal order, stating that the order will come into force on July 1, 2021, instead of the original date. The order is issued under the authority of subsections 1 and 2 of section 16 read with subsection 3 of section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), after consulting the Bureau of Indian Standards, and is deemed necessary in the public interest. The F. No. is P-270254/2020-Leather and the Jt. Secy is Anil Agrawal. The principal order was published on October 28, 2020, as S.O. 3858(E), dated October 27, 2020.
Key Entities Referenced
Bureau of Indian Standards: A standards body consulted by the Central Government.
Bureau of Indian Standards Act, 2016: The legal act under which the order is issued, specifically referencing sections 16 and 25.
Central Government: The governing authority issuing the order.
Footwear made from allRubber and all Polymeric material and its components Quality Control Order, 2020: The principal order being amended.
Footwear made from allRubber and all Polymeric material and its components Quality Control Amendment Order, 2020: The short title of the current amendment order.
Ministry of Commerce and Industry: The ministry under which the Department for Promotion of Industry and Internal Trade operates.
Department for Promotion of Industry and Internal Trade: The department within the Ministry of Commerce and Industry that issued the order.
Anil Agrawal: Joint Secretary of the Government of India.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-04122020-223498
xxxGIDHxxx
CG-DL-E-04122020-223498
xxxGIDExxx
ऄसाधारण
EXTRAORDINARY
भाग II—खण् ड 3—ईप-खण्ड (ii)
PART II—Section 3—Sub-section (ii)
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 3840] नइ ददल्ली, िुक्रवार, ददसम्ब र 4, 2020/ऄग्रहायण 13, 1942
No. 3840] NEW DELHI, FRIDAY, DECEMBER 4, 2020/AGRAHAYANA 13, 1942
वाजणज्य रर ई्योगग म्ं ालय
(ई्योगग सवं धनध रर अतं ररक व्य ापार जवभाग)
(चमड़ा रर फुटजवयर ऄनभु ाग)
अदेि
नइ ददल् ली, 4 ददसम् बर, 2020
का.अ. 4378(ऄ).—भारतीय मानक ब् यरू योग ऄजधजनयम, 2016 (2016 का 11) की धारा 25 की ईप-धारा (3) के
साथ परित धारा 16 की ईप-धारा (1) रर (2) द्वारा प्रदत्त िजतियय का ईपययोगग करत े ुएए भारतीय मानक ब् यूरयोग स े
परामिध करन े के पश् चात केंद्र सरकार की राय ह ै दक ऐसा करना लयोगकजहत म ें अवश् यक ऄथवा समीचीन ह,ै ऄत: एतद्द्वारा
पूरे रबड़ रर पूरे पॉलीमेररक सामान रर आसके घटक से जनर्ममत फुटवेयर (गुणवत् ता जनयं्ण) अदेि, 2020 में संियोगधन
करने के जलए जनम्न जलजखत अदिे करती ह,ै नामतः -
1. सजं िप्त िी्कध रर प्रारंभ - (1) आस अदेि का संजिप् त नाम पूरे रबड़ रर परू े पॉलीमेररक सामान रर आसके घटक स े
जनर्ममत फुटवेयर (गणु वत् ता जनय्ं ण) संियोगधन अदेि, 2020 ह।ै
(2) यह रािप् में प्रकािन की तारीख से प्रभावी हयोगगा ।
5921 GI/2020 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
2. पूरे रबड़ रर पूरे पॉलीमेररक सामान रर आसके घटक स े जनर्ममत फुटवेयर (गणु वत् ता जनयं्ण) अदेि, 2020 म ें
पैरा 1 के ईप-पैरा (2) कयोग जनम्नजलजखत ईप-पैरा से प्रजतस्ट्थाजपत दकया िायेगा :-
“(2) यह अदेि ददनांक 1 िलु ाइ, 2021 से प्रभावी हयोगगा”।
[फा. सं. पी-27025/4/2020-चमड़ा]
ऄजनल ऄग्रवाल, संयुक् त सजचव
नयोगट : प्रमुख अदेि का.अ. 3858(ऄ), ददनांक 27 ऄक्टूबर 2020 के िररय े भारत के रािप्, ऄसाधारण, भाग-II,
खंड-3, ईप-खंड (ii) के तहत ददनांक 28 ऄक्टूबर 2020 कयोग प्रकाजित ुएअ था ।
MINISTRY OF COMMERCE AND INDUSTRY
(Department for Promotion of Industry and Internal Trade)
(LEATHER AND FOOTWEAR SECTION)
ORDER
New Delhi, the 4th December, 2020
S.O. 4378(E).—In exercise of the powers conferred by sub-section (1) and (2) of section 16 read
with sub-section (3) of section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central
Government, after consulting the Bureau of Indian Standards, is of the opinion that it is necessary or
expedient so to do in the public interest, hereby makes the following Order to amend the Footwear made
from all-Rubber and all Polymeric material and its components (Quality Control) Order, 2020, namely:-
1. Short title, commencement. – (1) This Order may be called the Footwear made from all-Rubber and
all Polymeric material and its components (Quality Control) Amendment Order, 2020.
(2) It shall come into force from the date of its publication in the Official Gazette.
2. In the Footwear made from all-Rubber and all Polymeric material and its components (Quality
Control) Order, 2020, in Paragraph 1, for Sub-Paragraph (2), the following Sub-Paragraph shall be
substituted, namely:-
“(2) It shall come into force with effect from 1st July, 2021”.
[F. No. P-27025/4/2020-Leather]
ANIL AGRAWAL, Jt. Secy.
Note : The principal Order was published in the Gazette of India, Extraordinary under Part II, Section 3,
Sub-section (ii) dated 28th October, 2020 vide number S.O. 3858 (E), dated 27th October, 2020.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.