This document is the Safety Glass Quality Control Second Amendment Order, 2020, issued by the Ministry of Commerce and Industry's Department of Promotion of Industry and Internal Trade. Published in the Gazette of India on September 18, 2020, with notification number S.O. 3190(E), the order amends the Safety Glass Quality Control Order, 2020. The amendment stipulates that the Safety Glass Quality Control Order, 2020 will not apply to safety glass used in vehicles imported into India by vehicle manufacturers under Rule 126 of the Central Motor Vehicle Rules, 1989. The order is issued under the authority of subsections (1) and (2) of section 16, read with subsection (3) of section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016). The responsible authority is Joint Secretary Anil Agrawal (F.No. 1112018-CI). The principal order was previously published under notification number S.O. 1045(E), dated March 12, 2020, and last amended under notification number S.O. 2018(E), dated June 23, 2020.
Key Entities Referenced
Bureau of Indian Standards Act, 2016: An act of the Indian Parliament that establishes the Bureau of Indian Standards and defines its powers and functions.
Central Government: The executive branch of the Government of India, responsible for implementing laws and policies.
Ministry of Commerce and Industry: A ministry of the Government of India responsible for the development and regulation of industries and internal trade.
Department of Promotion of Industry and Internal Trade: A department under the Ministry of Commerce and Industry responsible for promoting industrial development and regulating internal trade in India.
Safety Glass Quality Control Order, 2020: A quality control order related to safety glass, as amended by this notification.
Central Motor Vehicle rules, 1989: The rules established by the central government for motor vehicle regulation.
New Delhi: The capital of India, where the order was issued.
Anil Agrawal: The Joint Secretary who signed the order.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-19092020-221839
xxxGIDHxxx
CG-DL-E-19092020-221839
xxxGIDExxx
ऄसाधारण
EXTRAORDINARY
भाग II—खण् ड 3—ईप-खण्ड (ii)
PART II—Section 3—Sub-section (ii)
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 2842] नइ ददल्ली िुक्रवार, जसतम्ब र 18, 2020/भाद्र 27, 1942
No. 2842] NEW DELHI, FRIDAY, SEPTEMBER 18, 2020/BHADRA 27, 1942
वाजणज्य रर ई्योगग म्ं ालय
(ई्योगग सवं धनध रर अतं ररक व्य ापार जवभाग)
अदेि
नइ ददल् ली, 18 जसतम्ब र, 2020
का.अ. 3190(ऄ).—भारतीय मानक ब् यरू योग ऄजधजनयम, 2016 (2016 का 11) की धारा 25 की ईप-धारा (3) के
साथ परित धारा 16 की ईप-धाराओं (1) रर (2) द्वारा प्रदत् त िजियों का प्रययोगग करते हुए, भारतीय मानक ब् यरू योग स े
परामिध करने के बाद केंद्र सरकार की राय ह ै दक ऐसा करना िनजहत में अवश् यक ह,ै ऄत: एतद्द्वारा सेफ्टी ग्लास (गणु वत् ता
जनयं्ण) अदेि, 2020 म ेंरर अगे संियोगधन करने के जलए जनम् नजलजखत अदेि करती ह,ै नामत:-
1. संजिप्त िी्कध रर प्रारंभ– (1) आस अदेि कयोग सेफ्टी ग्लास (गुणवत् ता जनयं्ण) दसू रा संियोगधन अदेि, 2020 कहा
िाएगा।
(2) यह आसके िासकीय रािप् में प्रकािन की तारीख स ेप्रभावी हयोगगा।
2. सेफ्टी ग्लास (गणु वत् ता जनय्ं ण) अदेि, 2020 म,ें पैरा 2 म,ें ितध के बाद, जनम्नजलजखत ितध कयोग सजम्मजलत दकया
िाएगा, नामतः-
4349 GI/2020 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
“बिते दक केंद्रीय मयोगटर वाहन जनयम, 1989 के जनयम 126 के प्रावधानों के तहत वाहन जनमाधता द्वारा भारत में अयात
दकए गए वाहन में ईपययोगग दकए िाने वाल ेसुरिा ग्लास पर आस अदेि से कुछ भी लाग ूनहीं हयोगगा।”
[फा.स ं.11(1)/2018-सीअइ]
ऄजनल ऄग्रवाल, संयुक् त सजवव
नयोगट : प्रमुख अदिे का.अ. 1045(ऄ), ददनांक 12 माव ध 2020 के िररए भारत के रािप्, ऄसाधारण, भाग II, खंड 3,
ईप-खंड (ii) के तहत प्रकाजित हुअ था रर ऄंजतम संियोगजधत ऄजधसूवना संख्या का.अ. 2018(ऄ), ददनांक
23 िून 2020 कयोग हुअ।
MINISTRY OF COMMERCE AND INDUSTRY
(Department of Promotion of Industry and Internal Trade)
ORDER
New Delhi, the 18th September, 2020
S.O. 3190(E).—In exercise of the powers conferred by sub-sections (1) and (2) of section 16 read with
sub-section (3) of section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central Government, after
consulting the Bureau of Indian Standards, is of the opinion that it is necessary so to do in the public interest, hereby
makes the following Order further to amend the Safety glass (Quality Control) Order, 2020, namely:-
1. Short title and commencement.– (1) This Order may be called the Safety Glass (Quality Control) Second
Amendment Order, 2020.
(2) It shall come into force on the date of its publication in the Official Gazette.
2. In the Safety Glass (Quality Control) Order, 2020, in Paragraph 2, after the proviso, the following proviso shall be
inserted, namely:-
―Provided further that nothing in this Order shall apply to safety glass used in the vehicle imported in India by vehicle
manufacturer under the provisions of rule 126 of Central Motor Vehicle rules, 1989‖.
[F.No. 11(1)/2018-CI]
ANIL AGRAWAL, Jt. Secy.
Note : The principal order was published in the Gazette of India, Extraordinary under Part II, Section 3,
sub-section (ii) vide notification number S.O. 1045(E), dated the 12th March, 2020 and last amended vide
notification number S.O. 2018(E), dated the 23rd June, 2020.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.