## Report on the Footwear Made from Leather and other materials Quality Control Amendment Order, 2021
**1. Executive Summary:**
This report analyzes the "Footwear made from Leather and other materials Quality Control Amendment Order, 2021," based solely on the provided official gazette notification. This amendment modifies the "Footwear made from Leather and other materials Quality Control Order, 2020." The core purpose of this amendment, as inferred from the text, is to postpone the enforcement date of the original order. The key finding is a change in the commencement date from an unspecified earlier date to July 1st, 2022.
**2. Introduction:**
This report aims to provide an overview of the "Footwear made from Leather and other materials Quality Control Amendment Order, 2021." The analysis is based exclusively on the information contained within the provided government policy text.
**3. Policy Overview:**
* This document is an amendment to the "Footwear made from Leather and other materials Quality Control Order, 2020."
* The core objective, inferred from the amendment, is to modify the implementation timeline of the original Quality Control Order.
**4. Background and Rationale:**
The provided text does not explicitly state the reason for the amendment. However, the fact that the *only* change involves altering the commencement date suggests that there was a need to delay the original implementation timeline. Possible reasons (though not explicitly stated) could include: industry readiness, supply chain constraints, or further consultation requirements.
**5. Key Provisions / Changes:**
This section details the changes introduced by the amendment:
* **Specific Part of Original Policy Changed:** Paragraph 1, subparagraph 2 of the "Footwear made from Leather and other materials Quality Control Order, 2020" is being amended.
* **New Rule/Provision:** The original implementation date is being replaced with the following: "It shall come into force with effect from 1st July, 2022."
* **Difference/Effect of Change:** The original Quality Control Order was initially intended to be implemented at an earlier, unspecified date. This amendment delays the enforcement of the order until July 1st, 2022. This means businesses will have additional time to comply with the requirements set forth in the original 2020 order.
**6. Target Audience and Stakeholders:**
Based on the title, the primary target audience and stakeholders are manufacturers, importers, and distributors of footwear made from leather and other materials. This includes businesses involved in the production, sale, and trade of such footwear within India.
**7. Implementation Aspects (Inferred):**
* **Responsible agency:** The "Ministry of Commerce and Industry, Department for Promotion of Industry and Internal Trade" is the responsible government body. The "Bureau of Indian Standards" was consulted.
* **Timelines:** The key timeline specified is the new enforcement date of July 1st, 2022.
* **Implementation of Changes:** The amendment is effective from the date of its publication in the Official Gazette (June 30, 2021). The implementation of the Quality Control Order itself (the original order) is now shifted to July 1st, 2022.
**8. Expected Outcomes / Impact of Changes:**
The intended outcome of this amendment is to provide the footwear industry with more time to prepare for and comply with the requirements outlined in the original "Footwear made from Leather and other materials Quality Control Order, 2020." This could potentially lead to a smoother transition and reduced disruption within the industry. The extended timeline may also allow for greater stakeholder engagement and address any potential challenges in meeting the order's requirements.
**9. Conclusion:**
The "Footwear made from Leather and other materials Quality Control Amendment Order, 2021" is a significant update that delays the implementation of the original 2020 Quality Control Order to July 1st, 2022. This delay likely aims to provide the footwear industry with additional time to align with the order's stipulations. This amendment is crucial for all stakeholders involved in the footwear industry, as it directly impacts the timeline for compliance. Understanding this amendment is essential for businesses to plan and adjust their operations accordingly.
Key Entities Referenced
New Delhi: Location where the order was issued.
Ministry of Commerce and Industry: The ministry under which the Department for Promotion of Industry and Internal Trade falls.
Department for Promotion of Industry and Internal Trade: The department that issued the order.
Bureau of Indian Standards Act, 2016: The act under which the powers are conferred to issue the order.
Central Government: The governing body that, after consulting the Bureau, makes the order.
Footwear made from Leather and other materials Quality Control Order, 2020: The original order that is being amended.
Footwear made from Leather and other materials Quality Control Amendment Order, 2021: The short title of the amendment order.
VANDANA KUMAR: Jt. Secy. who signed the order.
Government of India Press, Ring Road, Mayapuri, New Delhi: The location where the document was printed.
Controller of Publications, Delhi: The publisher of the document.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-30062021-228023
xxxGIDHxxx
CG-DL-E-30062021-228023
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग II—खण्ड 3—उप-खण्ड (ii)
PART II—Section 3—Sub-section (ii)
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 2454] नई ददल्ली, बधु वार, िनू 30, 2021/आर्ाढ़ 9, 1943
No. 2454] NEW DELHI, WEDNESDAY, JUNE 30, 2021/ASHADHA 9, 1943
वाजणज्य और उद्योग मंत्रालय
(उद्योग संवधनध और आंतररक व् यापार जवभाग)
आदिे
नई ददल्ली, 30 िून, 2021
का.आ. 2645(अ).—भारतीय मानक ब्य ूरो अजधजनयम, 2016 (2016 का 11) की धारा 25 की उप-धारा (3) के
साथ परित धारा 16 की उप-धारा (1) और (2) द्वारा प्रदत् त िजियों का उपयोग करते हुए, भारतीय मानक ब्य ूरो से
परामिध करने के पश्च ात केंद्र सरकार की राय ह ै दक ऐसा करना लोकजहत में आवश् यक अथवा समीचीन ह,ै अत: एतद्द्वारा
चमडे और अन्य सामग्री से जनर्मधत फुटजवयर (गुणवत् ता जनयंत्रण) आदिे , 2020 में संिोधन करने के जलए जनम्न जलजखत
आदिे करती ह,ै नामतः -
1. संजिप्त िीर्धक और प्रारंभ- (1) इस आदिे का संजिप् त नाम चमडे और अन्य सामग्री से जनर्मधत फुटजवयर (गुणवत् ता
जनयंत्रण) संिोधन आदिे , 2021 कहा िायेगा ।
(2) यह रािपत्र में प्रकािन की तारीख से प्रभावी होगा।
2. चमडे और अन्य सामग्री से जनर्मधत फुटजवयर (गुणवत् ता जनयंत्रण) आदिे , 2020 में पैरा 1 के उप-पैरा (2) को
जनम्नजलजखत उप-पैरा से प्रजतस्ट्थाजपत दकया िायेगा:-
“(2) यह आदिे ददनाकं 1 िुलाई, 2022 से प्रभावी होगा।”
[फा.सं.पी-27025/4/2020-चमडा]
वंदना कुमार, संयुक् त सजचव
नोट : यह प्रमुख आदिे का.आ. 3860 (अ), ददनांक 27 अक्टूबर 2020 तथा संिोजधत का. आ. 4379 (अ), ददनांक 4
ददसंबर 2020 के िररय े ददनांक 28 अक्टूबर, 2020 को भारत के रािपत्र, असाधारण, भाग-II, खंड-3, उप-खंड (ii) में
प्रकाजित हुआ था।
3631 GI/2021 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)]
MINISTRY OF COMMERCE AND INDUSTRY
(Department for Promotion of Industry and Internal Trade)
ORDER
New Delhi, the 30th June, 2021
S.O. 2645(E).—In exercise of the powers conferred by sub-sections (1) and (2) of section 16 read
with sub-section (3) of section 25 of the Bureau of Indian Standards Act, 2016 (11 of 2016), the Central
Government, after Consulting the Bureau, is of the opinion that it is necessary or expedient so to do in the
public interest, hereby makes the following Order further to amend the Footwear made from Leather and
other materials (Quality Control) Order, 2020, namely:-
1. Short title and commencement– (1) This Order may be called the Footwear made from Leather and
other materials (Quality Control) Amendment Order, 2021.
(2) It shall come into force from the date of its publication in the Official Gazette.
2. In the Footwear made from Leather and other materials (Quality Control) Order, 2020, in Paragraph 1,
for sub-paragraph (2), the following sub-paragraph shall be substituted, namely: -
“(2) It shall come into force with effect from 1st July, 2022.”
[F. No. P-27025/4/2020 - Leather]
VANDANA KUMAR, Jt. Secy.
Note: The Principal Order was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-
section (ii) dated the 28 October, 2020 vide number S.O. 3860 (E), dated the 27th October, 2020 and
amended vide number S.O. 4379 (E) dated the 4th December, 2020.
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.