Home India Ministry of Consumer Affairs, Food and Public Distribution In pursuance of clause b of sub rule 1 of Rule 7 of the Bure...
Date: 2018-11-30 Category: Extra Ordinary State: Union Government Country: India

In pursuance of clause b of sub rule 1 of Rule 7 of the Bureau of Indian Standards Rules

Issued by Ministry of Consumer Affairs, Food and Public Distribution · Department of Consumer Affairs

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

Executive Summary: This notification from the Bureau of Indian Standards announces the establishment and cancellation of various Indian Standards. It lists updated standards across diverse sectors, including iron and steel, machinery safety, medical equipment, and more. All standards mentioned in the notification were established/cancelled on November 26, 2018. Key Points / Main Content: Standards Established and Cancelled: * **IS 217: 2018:** Establishes the "Specification for Cutback Bitumen Third Revision" while cancelling "IS 217: 1988 Specification for Cutback Bitumen Second Revision." * **IS 2742 Part 6 & 7: 2018:** Establishes standards for "Automotive Vehicles Brake Linings" parts 6 and 7 regarding compressive strain test methods and shear test procedures respectively. * **IS 9000 Part 7 Sec 1: 2018:** Establishes standard based on "IEC 60068227: 2008 Basic Environmental Testing Procedures" while cancelling "IS 9000 Part 7 Sec 1: 2006IEC 60068227: 1987." * **IS 11866: 2018:** Establishes standard based on "IEC 60325: 2002 Radiation Protection Instrumentation" while cancelling "IS 11866: 1987IEC 60325: 1981." * **IS 11868: 2018:** Establishes standard based on "IEC 62598: 2011 Nuclear Instrumentation" while cancelling "IS 11868: 1937IECPub 405: 1972." * **ISISO 12117: 1997:** Establishes standard for "EarthMoving Machinery TipOver Protection Structure TOPS for Compact Excavators." * **IS 12761 Parts 1, 2 & 3: 2018:** Establishes standards based on "IEC 60761" for "Equipment for Continuous Monitoring of Radioactivity in Gaseous Effluents" while cancelling "IS 12761 Parts 1, 2 & 3: 1989IEC Pub 7611, 7612 & 7613: 1983." * **IS 13360 Part 9 Sec 10: 2018:** Establishes standard for "Plastics Method of Testing Part 9 Optical Properties Section 10 Qualitative Evaluation of the Bleeding of Colorants." * **IS 13736 Part 1: 2018:** Establishes standard based on "IEC 607211: 2002 Classification of Environmental Conditions" while cancelling "IS 13736 Part 1: 1993IEC Pub 7211: 1990." * **IS 15297: 2018:** Establishes standard based on "ISO 6103: 2014 Bonded Abrasive Products" while cancelling "IS 15297: 2013ISO 6103: 2005." * **ISISO 15676: 2016:** Establishes standard for "Cardiovascular Implants and Artificial Organs" while cancelling "ISISO 15676: 2005." * **IS 16806 Parts 1, 3 & 9: 2018:** Establishes standards based on "ISO 290421: 2008, ISO 290423: 2009 & ISO 290429: 2011" for "Safety of Machinery Evaluation of the Emission of Airborne Hazardous Substances." * **IS 16809 Part 1: 2018:** Establishes standard based on "ISO 141221: 2016 Safety of Machinery Permanent Means of Access to Machinery." * **IS 16811: 2018:** Establishes standard based on "ISO 14120: 2015 Safety of Machinery Guards." * **IS 16812: 2018:** Establishes standard based on "ISO 14119: 2013 Safety of Machinery Interlocking Devices Associated with Guards." * **IS 16834 Parts 1 & 2: 2018:** Establishes standards based on "ISO 141231: 2015 & ISO 141232: 2015 Safety of Machinery Reduction of Risks to Health Resulting from Hazardous Substances Emitted by Machinery." * **IS 16835 Part 3: 2018:** Establishes standard based on "ISO 138563: 2013 Safety of Machinery Pressure Sensitive Protective Devices." * **IS 16862: 2018:** Establishes standard based on "IECPAS 63015: 2016 Definition of LowHalogen for Electronic Products." * **IS 16893 Parts 1 & 2: 2018:** Establishes standards based on "IEC 626601: 2010 & IEC 626602: 2010 Secondary LithiumIon Cells for the Propulsion of Electric Road Vehicles." * **IS 17044: 2018:** Establishes standard based on "ISO 240: 2016 Dimensions Interchangeability for Cutter Arbors" while cancelling "IS 6285: 1971 & IS 6310: 1971." * **ISISOTS 22220: 2011:** Establishes standard for "Health Informatics Identification of Subjects of Health Care." * **ISISO 23500: 2014:** Establishes standard for "Guidance for the Preparation and Quality Management of Fluids for Haemodialysis and Related Therapies." * **ISIEC 61170: 1993:** Establishes standard for "Radiotherapy Simulators Guidelines for Functional Performance Characteristics." * **ISIECTS 62556: 2014:** Establishes standard for "Ultrasonics Field Characterization." * **IS 1956 Part 2: 2018:** Establishes standard for "Glossary of Terms Relating to Iron and Steel Part 2 Steel Making" while cancelling "IS 1956 Part 2: 1976." * **IS 4463: 2018:** Establishes standard for "Hookah Tobacco, Flake Type Specification" while cancelling "IS 4463: 1973." * **IS 11172 Part 1: 2018:** Establishes standard based on "ISO 108891: 2004 Tool Holders with Cylindrical Shank" while cancelling "IS 11172 Part 1: 1985." * **IS 11201: 2018:** Establishes standard for "Cane Crushing Rollers for Sugar Industry" while cancelling "IS 11201: 1985." * **IS 11424: 2018:** Establishes standard based on "IEC 61239: 1993 Nuclear Instrumentation Portable Gamma Radiation Meters" while cancelling "IS 11424: 1985IEC Pub 460: 1974." * **IS 11605: 2018:** Establishes standard for "Specification for Woven Mesh Type Supporting Liners for Batch Type Centrifugal Machines Used in Sugar Industry" while cancelling "IS 11605: 1986." * **IS 13450 Part 2 Sec 62: 2018:** Establishes standard based on "IEC 60601262: 2013 Medical Electrical Equipment Part 2." * **ISISO 13959: 2014:** Establishes standard for "Water for Haemodialysis and Related Therapies." * **IS 14458 Parts 4 & 5: 2018:** Establishes standards for "Retaining Wall for Hill Areas Guidelines." * **IS 14667: 2018:** Establishes standard for "Conveyor Chains and Slats Used in Sugar Industry" while cancelling "IS 14667: 1999." * **IS 15287 Part 3: 2018:** Establishes standard based on "ISO 6344 3: 2013 Coated Abrasives Grain Size Analysis" while cancelling "IS 15287 Part 3: 2003ISO 63443: 1998." * **IS 15504: 2018:** Establishes standard based on "ISO 7001: 2007 Graphical Symbols Public Information Symbols" while cancelling "IS 15504: 2004ISO 7001: 1990." * **IS 16489: 2018:** Establishes standard for "Soymilk Non Dairy Product Specification." * **IS 16827: 2018:** Establishes standard based on "ISOIECPAS 16898: 2012 Electrically Propelled Road Vehicles." * **IS 16847: 2018:** Establishes standard based on "ISO 6565: 2015 Tobacco and Tobacco Products." * **IS 16852: 2018:** Establishes standard based on "ISOTS 11366: 2011 Petroleum and Related Products Guidance." * **IS 16858: 2018:** Establishes standard based on "ISO 23853: 2004 Cranes Training of Slingers and Signallers." * **IS 16894 Parts 1, 2 & 3: 2018:** Establishes standards based on "IEC 62485 Safety Requirements for Secondary Batteries and Battery Installations." * **IS 16909: 2018:** Establishes standard for "Girth Gear Lubricants Specification." * **IS 17050: 2018:** Establishes standard based on "IEC 62262: 2002 Degrees of Protection Provided by Enclosures for Electrical Equipment." * **ISISO 178221: 2014:** Establishes standard for "In vitro Diagnostic Test Systems Qualitative Nucleic AcidBased." * **ISISO 19011: 2018:** Establishes standard for "Guidelines for Auditing Management Systems" while cancelling "ISISO 19011: 2011." * **ISISOIEC 200003: 2012:** Establishes standard for "Information Technology Service Management Part 3." * **ISIEC 60168: 2000:** Establishes standard for "Tests on Indoor and Outdoor Post Insulators" while cancelling "IS 2544: 1973." * **ISIEC 60255121: 2014:** Establishes standard for "Measuring Relays and Protection Equipment." * **ISIEC 60794210: 2011:** Establishes standard for "Optical Fibre Cables Part 2." * **ISIEC 61168: 1993:** Establishes standard for "Radiotherapy Simulators Functional Performance Characteristics." * **ISIEC 62353: 2014:** Establishes standard for "Medical Electrical Equipment Recurrent Test" while cancelling "ISIEC 62353: 2007." Impact Analysis: * Manufacturers and Producers: * Impact: Must comply with the newly established and revised standards in their production processes and product design. * Action Required: Review and update manufacturing processes, product designs, and quality control procedures to align with the new standards. * Testing and Certification Bodies: * Impact: Responsible for testing and certifying products against the new standards. * Action Required: Update testing procedures and certification criteria to reflect the requirements of the new standards. * Consumers and End-Users: * Impact: Benefit from products that meet updated safety and performance standards. * Action Required: Be aware of the updated standards and look for products that are certified to meet them. * Bureau of Indian Standards (BIS): * Impact: Responsible for implementing and enforcing the standards. * Action Required: Disseminate information about the new standards, conduct audits and inspections to ensure compliance, and address any queries or concerns from stakeholders.

Key Entities Referenced

Bureau of Indian Standards: A national standards body of India responsible for the formulation, recognition and promotion of standards. Bureau of Indian Standards Rules, 1987: A set of rules governing the operations and functions of the Bureau of Indian Standards. Indian Standards: A set of standards developed and maintained by the Bureau of Indian Standards covering various products, processes, and services. New Delhi: The location where the notification was issued. Ministry of Consumer Affairs, Food and Public Distribution: The ministry responsible for consumer affairs, food and public distribution in India. IEC: International Electrotechnical Commission ISO: International Organization for Standardization IS 217: Indian Standard for Cutback Bitumen Specification
Official Source Record View Original Source →
See Full Document Text
jftLVªh laö Mhö ,yö&33004@99 REGD. NO. D. L.-33004/99 vlk/kj.k EXTRAORDINARY Hkkx II—[k.M 3—mi&[k.M (ii) PART II—Section 3—Sub-section (ii) izkf/dkj ls izdkf'kr PUBLISHED BY AUTHORITY la- 4649] ubZ fnYyh] 'kqØokj] uoEcj 30] 2018@vxzgk;.k 9] 1940 No. 4649] NEW DELHI, FRIDAY, NOVEMBER 30, 2018/AGRAHAYANA 9, 1940 उउउउपपपपभभभभोोोो(cid:5)(cid:5)(cid:5)(cid:5)तततत ाााा ममममााााममममलललल,,,ेे,ेे खखखखाााा(cid:10)(cid:10)(cid:10)(cid:10) औऔऔऔरररर ससससााााववववजज(cid:15)(cid:15)जज(cid:15)(cid:15) ििििननननकककक ििििववववततततररररणणणण मममम(cid:23)(cid:23)ंं(cid:23)(cid:23)ंं ााााललललयययय ((((उउउउपपपपभभभभोोोो(cid:6)(cid:6)(cid:6)(cid:6)तत तत ाााा ममममााााममममलललल ेे ेेििििवववव भभ भभाााागगगग)))) ((((भभभभााााररररततततीीीीयययय ममममााााननननकककक (cid:16)(cid:16)(cid:16)(cid:16)यय यय ररूूररूू ोोोो)))) अअअअििििधधधधससससचचूूचचूू ननननाााा नई (cid:4)द(cid:6) ली, 27 नव(cid:10)बर, 2018 ककककाााा....आआआआ.... 5555888877773333 ((((अअअअ)))) .———— भारतीय मानक (cid:16) यूरो िनयम, 1987 के िनयम 7 के उपिनयम (1) के खंड (ख) के अनसु रण म(cid:19) भारतीय मानक (cid:16)य ूरो एतद ्(cid:24)ारा अिधसूिचत करता ह ै(cid:4)क िजन भारतीय मानक! के िववरण नीचे अनसु ूची म (cid:19)(cid:4)दए गए ह &वे ’थ ािपत हो गय ेह।& (cid:18)(cid:18)(cid:18)(cid:18)मममम (cid:22)(cid:22)(cid:22)(cid:22)थथ थथ ााााििििपपपपतततत भभभभााााररररततततीीीीयययय ममममााााननननकककक ((((कककक(cid:25)(cid:25)(cid:25)(cid:25))))) कककक(cid:27)(cid:27)(cid:27)(cid:27) (cid:22)(cid:22)(cid:22)(cid:22)थथ थथ ााााििििपपपपतततत ििििततततििििथथथथ भभभभााााररररततततीीीीयययय ममममााााननननकककक((((कककक(cid:25)(cid:25)(cid:25)(cid:25))))) जजजजोोोो """"कककक रररर#### रररर#### हहहहोोोोनननन ेे ेेकककक(cid:27)(cid:27)(cid:27)(cid:27) ििििततततििििथथथथ सससस(cid:21)(cid:21)ंं(cid:21)(cid:21)ंं यय यय ाााा ससससं(cid:21)ं(cid:21)ं(cid:21)ं(cid:21)यय यय ाााा ववववषषषष (cid:30)(cid:30) (cid:30)(cid:30)औऔऔऔरररर शशशशीीीीषषषषकक(cid:30)(cid:30)कक(cid:30)(cid:30) हहहहोोोोनननन ेे ेेहहहह,,&&,,&& अअअअगगगगरररर हहहह,,&&,,&& कककक(cid:27)(cid:27)(cid:27)(cid:27) सससस(cid:21)(cid:21)ंं(cid:21)(cid:21)ंं यय यय ाााा ववववषषषष(cid:30) (cid:30) (cid:30) (cid:30) औऔऔऔरररर शशशशीीीीषषषष(cid:30)क(cid:30)क(cid:30)क(cid:30)क ((((1111)))) ((((2222)))) ((((3333)))) ((((4444)))) ((((5555)))) 1. आई एस 217 : 2018 कटबैक िबटूमेन ─ 26 नव(cid:15)बर 2018 आई एस 217 : 1988 कटबैक िबटूमने 26 नव(cid:15)बर 2018 िविशि(cid:4) ─ िविशि(cid:4) (तीसरा पुनरी(cid:10)ण) (दसू रा पुनरी(cid:10)ण) 2. आई एस 2742 (भाग 6) : 2018 (cid:20)वचल 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) वाहन ─ (cid:23)ेक अ(cid:20)तर भाग 6 संपीडन तनाव परी(cid:10)ण प(cid:27)ितया ँ 3. आई एस 2742 (भाग 7) : 2018 (cid:20)वचल 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) वाहन ─ (cid:23)ेक अ(cid:20)तर भाग 7 िड(cid:20)क (cid:23)के पैड एवं #म (cid:23)ेक शू एस&बली के िलए कतरनी 6917 GI/2018 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] परी(cid:10)ण प(cid:27)ती 4. आई एस 9000 (भाग 7/अनुभाग 1) : 26 नव(cid:15)बर 2018 आई एस 9000 (भाग 7/अनुभाग 1) : 26 नव(cid:15)बर 2018 2018/आई ई सी 60068-2-27 : 2008 2006/आई ई सी 60068-2-27 : इले()ािनक+ एवं िवघुतीय मद/ के िलए 1987 इले()ािनक+ एवं िवघुतीय मद/ बेिसक पयाव0 रण परी(cid:10)ण काय0िविधया ँभाग के िलए बेिसक पया0वरण परी(cid:10)ण 7 संघटट परी(cid:10)ण अनुभाग 1 5घात काय0िविधयाँ भाग 7 संघटट परी(cid:10)ण ( परी(cid:10)ण ईए) अनुभाग 1 5घात ( परी(cid:10)ण ईए) (दसू रा पुनरी(cid:10)ण) (पहला पुनरी(cid:10)ण) 5. आई एस 11866 : 2018/आई ई सी 26 नव(cid:15)बर 2018 आई एस 11866 : 1987/आई ई सी 26 नव(cid:15)बर 2018 60325 : 2002 िव7करण सरं (cid:10)ण 60325 : 1981 अ8फा, बीटा और उपकरण─अ8फा, बीटा और अ8फा/बीटा अ8फा-बीटा — िविशि(cid:4) 5दषू ण मीटर (बीटा एनज< > 60 keV) 5दषू ण मीटर और मॉनीटर और मॉनीटर (पहला पुनरी(cid:10)ण) 6. आई एस 11868 : 2018/आई ई सी 26 नव(cid:15)बर 2018 आई एस 11868 : 1937/आई ई सी 26 नव(cid:15)बर 2018 62598 : 2011 परमाणु य?ं ─ पब 405 : 1972 आयानकारी रेिडयोमेA)क गौजेस का वग<करण एव ं िव7करण के िखलाफ EिFगत सुर(cid:10)ा िनमा0ण क+ जाने वाली आवCयकताए ं के िलए परमाण ु यं? क+ िनमा0ण क+ (पहला पुनरी(cid:10)ण) जाने वाली आवCयकताए ं 7. आई एस 12117 : 1997 मृदा-सचं ालन 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) मशीनरी ─ कॉ(cid:15)पै(ट ए(cid:20)केवेटर के िलए Aटप-ओवर संर(cid:10)ण संरचना (टॉJस) ─ 5योगशाला परी(cid:10)ण एवं काय0काAरता अपे(cid:10)ाय& 8. आई एस 12761 (भाग 1) : 2018/आई ई 26 नव(cid:15)बर 2018 आई एस 12761 (भाग 1) : 26 नव(cid:15)बर 2018 सी 60761-1 : 2002 गसै ीय 5दषू ण म & 1989/आई ई सी पब 761-1 : 1983 लगातार रेिडयोधLमता क+ िनगरानी के गैसीय 5दषू ण म& लगातार िलए उपकरण भाग 1 सामाNय रेिडयोधLमता क+ िनगरानी के िलए आवCय कताए ँ उपकरण भाग 1 सामाNय आवC यकताए ँ (पहला पुनरी(cid:10)ण) 9. आई एस 12761 (भाग 2) : 2018/आई ई 26 नव(cid:15)बर 2018 आई एस 12761 (भाग 2) : 26 नव(cid:15)बर 2018 सी 60761-2 : 2002 गैसीय 5दषू ण म & 1889/आई ई सी पब 761-2 : 1983 लगातार रेिडयोधLमता क+ िनगरानी के गैसीय 5दषू ण म& लगातार िलए उपकरण भाग 2 )ांसयुरेिनक रेिडयोधLमता क+ िनगरानी के िलए एयरोसोल सिहत रेिडयोधम< एयरोसोल उपकरण भाग 2 एयरोसोल इOफुल&ट मॉनीटर के िलए िविशि(cid:4) आवCय कताए ँ मॉनीटर के िलए िविशि(cid:4) आवC यकताए ँ (पहला पुनरी(cid:10)ण) 10. आई एस 12761 (भाग 3) : 2018/आई ई 26 नव(cid:15)बर 2018 आई एस 12761 (भाग 3) : 26 नव(cid:15)बर 2018 सी 60761-3 : 2002 गसै ीय 5दषू ण म & 1989/आई ई सी पब 761-3 : 1983 लगातार रेिडयोधLमता क+ िनगरानी के गैसीय 5दषू ण म& लगातार िलए उपकरण भाग 3 रेिडयोधम< नोबल रेिडयोधLमता क+ िनगरानी के िलए गैस मॉनीटर के िलए िविशि(cid:4) आवCय कताए ँ उपकरण भाग 3 नोबल गसै इOफुल&ट (पहला पुनरी(cid:10)ण) मॉनीटर के िलए िविशि(cid:4) आवC यकताएँ 11. आई एस 13360 (भाग 9/अनुभाग 10) : 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) 2018 Jलाि(cid:20)टक — परी(cid:10)ण प(cid:27)ितया ँभाग 9 5कािशत गुणधम0 अनुभाग 10 रंजक के¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 3 Qाव का गुणाRमक मू8यांकन 12. आई एस 13736 (भाग 1) : 2018/आई ई 26 नव(cid:15)बर 2018 आई एस 13736 (भाग 1) : 26 नव(cid:15)बर 2018 सी 60721-1 : 2002 पया0वरणीय 1993/आई ई सी पब 721-1 : 1990 अव(cid:20)थाT का वग<करण भाग 1 पया0वरण पया0वरणीय अव(cid:20)थाT का वग<करण 5ाचल और उनक+ गभं ीरताय& भाग 1 पया0वरण 5ाचल और उनक+ (पहला पुनरी(cid:10)ण) गंभीरताय& 13. आई एस 15297 : 2018/आई एस ओ 26 नव(cid:15)बर 2018 आई एस 15297 : 2013/आई एस ओ 26 नव(cid:15)बर 2018 6103 : 2014 ब/डडे अपघ0षी उRपाद ─ 6103 : 2005 ब/डडे अपघ0षी उRपाद सुपुद 0िघसाई पAWय/ म& असंतुलन ─ (cid:20)थ ैितक ─ सुपुद 0 िघसाई पAWय/ म& असंतुलन ─ परी(cid:10)ण (cid:20)थिैतक परी(cid:10)ण (दसू रा पुनरी(cid:10)ण) (पहला पुनरी(cid:10)ण) 14. आई एस/आई एस ओ 15676 : 2016 26 नव(cid:15)बर 2018 आई एस/आई एस ओ 15676 : 2005 26 नव(cid:15)बर 2018 काLडयोवै(cid:20)कुलर आरोपण और कृि?म अंग काLडयोवै(cid:20)कुलर आरोपण और कृि?म ─ एकल उपयोग काLडयोप8मोनरी अंग ─ एकल उपयोग काLडयोप8मोनरी बाईपास और ए((cid:20)टकॉपXAरयल िझ8ली बाईपास और ए((cid:20)टकॉपXAरयल िझ8ली ऑ(सीजनेशन (इ सी एम ओ) के िलए ऑ(सीजनेशन (इ सी एम ओ) के िलए एकल-उपयोग टयु[बग पैक क+ एकल-उपयोग टयु[बग पैक क+ आवCय कताए ं आवC यकताएं (5थम पुनरी(cid:10)ण) 15. आई एस 16806 (भाग 1) : 2008/आई 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) एस ओ 29042-1 : 2008 मशीनरी क+ सुर(cid:10)ा ─ वायुजिनत खतरनाक पदाथ\ के उRसज0न का मु8यांकन भाग 1 परी(cid:10)ण िविधय/ का चयन 16. आई एस 16806 (भाग 3) : 2018/आई 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) एस ओ 29042-3 : 2009 मशीनरी क+ सुर(cid:10)ा ─ वायुजिनत खतरनाक पदाथ\ के उRसज0न का मु8यांकन भाग 3 5द] 5दषू क क+ उRसज0न दर के माप के िलए टे(cid:20)ट ब&च िविध 17. आई एस 16806 (भाग 9) : 2018/आई 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) एस ओ 29042-9 : 2011 मशीनरी क+ सुर(cid:10)ा ─ वायुजिनत खतरनाक पदाथ\ के उRसज0न का मु8यांकन भाग 9 िवसदं षू ण सूचकांक 18. आई एस 16809 (भाग 1) : 2018/आई 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) एस ओ 14122-1 : 2016 मशीनरी क+ सुर(cid:10)ा ─ मशीनरी तक प^चँ का (cid:20)थायी साधन भाग 1 िनि_त मा‘यम का चुनाव एवं प^चँ क+ सामाNय आवCय कताएं 19. आई एस 16811 : 2018/आई एस ओ 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) 14120 : 2015 मशीनरी क+ सुर(cid:10)ा ─ गाड 0 ─ ि(cid:20)थर और गितशील गाड 0 के िडजाइन एवं िनमा0ण के िलए सामाNय आवCय कताएं 20. आई एस 16812 : 2018/आई एस ओ 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29)4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 14119 : 2013 मशीनरी क+ सुर(cid:10)ा ─ गाड 0के साथ जुड़ ेइंटरलाaकग िडवाइस ─ िडजाइन और चयन के िलए िस(cid:27)ांत 21. आई एस 16834 (भाग 1) : 2018/आई 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) एस ओ 14123-1 : 2015 मशीनरी क+ सुर(cid:10)ा ─ मशीनरी bारा उRपc (cid:20)वा(cid:20)dय के िलए खरतनाक पदाथ\ से जोिखम/ म &कमी भाग 1 मशीनरी िनमा0तT के िलए िस(cid:27)ांत और िविशि(cid:4) 22. आई एस 16834 (भाग 2) : 2018/आई 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) एस ओ 14123-2 : 2015 मशीनरी क+ सुर(cid:10)ा ─ मशीनरी bारा उRपc (cid:20)वा(cid:20)dय के िलए खरतनाक पदाथ\ से जोिखम/ म &कमी भाग 2 सRयापन 57eयाT के िलए अfणी काय05णाली 23. आई एस 16835 (भाग 3) : 2018/आई 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) एस ओ 13856-3 : 2013 मशीनरी क+ सुर(cid:10)ा ─ दबाव-सवं ेदनशील सुर(cid:10)ाRमक उपकरण भाग 3 दबाव-संवेदनशील 7कनार/ जोर दबाव-संवेदनशील सलाख/ के िडजाइन और परी(cid:10)ण के िलए सामाNय िस(cid:27)ांत 24. आई एस 16862 : 2018/आई ई सी 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) पीएस 63015 : 2016 इले()ॉिनक उRपाद/ हते ु ‘लौ-हलै ोजन’ क+ पAरभाषा 25. आई एस 16893 (भाग 1) : 2018/आई ई 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) सी 62660-1 : 2010 वैघुत सड़क वाहन/ के 5णोदन हते ु िbतीयक िलिथयम-आयन सैल भाग 1 काय0काAरता परी(cid:10)ण 26. आई एस 16893 (भाग 2) : 2018/आई ई 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) सी 62660-2 : 2010 वैघुत सड़क वाहन/ के 5णोदन हते ु िbतीयक िलिथयम-आयन सैल भाग 2 िवhसनीयता एव ं अप5योग पAर(cid:10)ण 27. आई एस 17044 : 2018/आई एस ओ 26 नव(cid:15)बर 2018 आई एस 6285 : 1971 िम[लग कटर 26 नव(cid:15)बर 2018 240 : 2016 िम[लग कटर ─ कटर आब0र और िम[लग आब0र कुंजी के साथ #ाइव—आयाम क+ िविनमयशीलता या कटर मैN#लै के िलए आयाम क+ िविनमयशीलता आई एस 6310 : 1971 िम[लग कटर और िम[लग आब0र टने न #ाइव के साथ–आयाम क+ िविनमयशीलता 28. आई एस/आई एस ओ/टी एस 22220 : 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) 2011 (cid:20)वा(cid:20)dय सूचना िवiान ─ (cid:20)वा(cid:20)dय देखभाल के िवषय/ क+ पहचान 29. आई एस/आई एस ओ 23500 : 2014 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) हमे ोडायिलिसस और सबं ंिधत उपचार के िलए तरल पदाथ0 क+ तैयारी और गणु व]ा¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 5 5बंधन के िलए माग0दश0न 30. आई एस/आई ई सी 61170 : 1993 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) रेिडयोथेरेपी िसमुलेटर – काया0Rमक 5दश0न िवशेषताT के िलए 7दशािनदशj 31. आई एस/आई ई सी/टी एस 62556 : 26 नव(cid:15)बर 2018 लागू नह(cid:29) लागू नह(cid:29) 2014 अ8)ासोिन(स — (cid:10)े?ीय वग<करण—उk तीlता थैरेपीAटक अ8)ासाउंड (एच आई टी यू) )ांसडयूसर और िस(cid:20)टम के िलए (cid:10)े?ीय पैरामीटर के िविनदशj और माप इस भारतीय मानक क(cid:13) (cid:14)ितयां भारतीय मानक (cid:17)यूरो, मानक भवन, 9, बहादरु शाह ज़फर माग(cid:28), नई (cid:30)द(cid:31) ली 110 002 !े#ीय काया(cid:28)लय$ : नई (cid:30)द(cid:31)ली, कोलकता, चंडीगढ़, चे&ई, मुंबई, तथा शाखा काया(cid:28)लय$: अहमदाबाद, बंगलौर, भोपाल, भुवने+र, कोयंबतूर, गुवाहाटी, हदै राबाद, जयपुर, पटना, पूणे तथा कोिच म. िब/(cid:13) हते ु उपल(cid:17)ध ह2। भारतीय मानक$ को http://www.standardsbis.in 4ारा इंटरनैट पर खरीदा जा सकता ह ै। [संदभ:(cid:28) PUB/3/3/2018-19] सी.बी. 8सह, अपर महािनदशे क MINISTRY OF CONSUMER AFFAIRS, FOOD AND PUBLIC DISTRIBUTION (Department of Consumer Affairs) (BUREAU OF INDIAN STANDARDS) NOTIFICATION New Delhi, the 27th November, 2018 S.O. 5873(E).—In pursuance of clause (b) of sub-rule (1) of Rule 7 of the Bureau of Indian Standards Rules, 1987, the Bureau of Indian Standards hereby notifies that the Indian Standards, particulars of which are given in the second column of schedule hereto annexed has been established on the date indicated against it in third column. The particulars of the standards, if any, which are given in the fourth column shall also remain in force concurrently till they are cancelled on the date indicated against them in the fifth column. SCHEDULE SL No, Year & Title of the Indian Date of No. Year & Title of the Date of No. Standards Established Indian Standards to be Cancellation Establishment Cancelled, if any (1) (2) (3) (4) (5) 1. IS 217 : 2018 Cutback Bitumen – 26 Nov 2018 IS 217 : 1988 Specification 26 Nov 2018 Specification for Cutback Bitumen (Third Revision) (Second Revision) 2. IS 2742 (Part 6) : 2018 Automotive 26 Nov 2018 NA NA Vehicles – Brake Linings Part 6 Compressive Strain Test Methods6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 3. IS 2742 (Part 7) : 2018 Automotive 26 Nov 2018 NA NA Vehicles – Brake Linings Part 7 Shear Test Procedure for Disc Brake Pad Drum Brake Shoe Assemblies 4. IS 9000 (Part 7/Sec 1) : 2018/IEC 26 Nov 2018 IS 9000 (Part 7/Sec 1) : 26 Nov 2018 60068-2-27 : 2008 Basic 2006/IEC 60068-2-27 : 1987 Environmental Testing Procedures for Basic Environmental Testing Electronic and Electrical Items Part 7 Procedures for Electronic Impact Test Section 1 Shock (Test Ea) and Electrical Items Part 7 Impact Test Section 1 Shock (Second Revision) (Test Ea) (First Revision) 5. IS 11866 : 2018/IEC 60325 : 2002 26 Nov 2018 IS 11866 : 1987/IEC 60325 : 26 Nov 2018 Radiation Protection Instrumentation 1981 Specification for Alpha, – Alpha, Beta and Alpha/Beta (Beta Beta and Alpha-Beta Energy > 60 keV) Contamination Contamination Meters and Meters and Monitors Monitors (First Revision) 6. IS 11868 : 2018/IEC 62598 : 2011 26 Nov 2018 IS 11868 : 1937/IEC/Pub 26 Nov 2018 Nuclear Instrumentation – 405: 1972– Constructional Constructional Requirements and Requirements of Nuclear Classification of Radiometric Gauges Instruments to afford Personal Protection Against (First Revision) Ionizing Radiation 7. IS/ISO 12117 : 1997 Earth-Moving 26 Nov 2018 NA NA Machinery – Tip-Over Protection Structure (TOPS) for Compact Excavators – Laboratory Tests and Performance Requirements 8. IS 12761 (Part 1) : 2018/IEC 60761-1: 26 Nov 2018 IS 12761 (Part 1) : 1989/IEC 26 Nov 2018 2002 Equipment for Continuous Pub 761-1 : 1983 Equipment Monitoring of Radioactivity in for Continuously Monitoring Gaseous Effluents Part 1 General Radioactivity in Gaseous Requirements Effluents Part 1 General Requirements (First Revision) 9. IS 12761 (Part 2 ) : 2018/IEC 60761- 26 Nov 2018 IS 12761 (Part 2 ) : 1889/IEC 26 Nov 2018 2: 2002 Equipment for Continuous Pub 761-2 : 1983 Equipment Monitoring of Radioactivity in for Continuously Monitoring Gaseous Effluents Part 2 Specific Radioactivity in Gaseous Requirements for Radioactive Aerosol Effluents Part 2 Specific Monitors including Transuranic Requirements for Aerosol Aerosols Effluent Monitors (First Revision) 10. IS 12761 (Part 3) : 2018/IEC 60761-3: 26 Nov 2018 IS 12761 (Part 3) : 1989/IEC 26 Nov 2018 2002 Equipment for Continuous Pub 761-3 : 1983 Equipment Monitoring of Radioactivity in for Continuously Monitoring Gaseous Effluents Part 3 Specific Radioactivity in Gaseous Requirements for Radioactive Noble Effluents Part 3 Specific Gas Monitors Requirements for Noble Gas Effluent Monitors (First Revision) 11. IS 13360 (Part 9/Sec 10) : 2018 26 Nov 2018 NA NA Plastics – Method of Testing Part 9¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 7 Optical Properties Section 10 Qualitative Evaluation of the Bleeding of Colorants 12. IS 13736 (Part 1) : 2018/IEC 60721-1: 26 Nov 2018 IS 13736 (Part 1) : 1993/IEC 26 Nov 2018 2002 Classification of Environmental Pub 721-1 : 1990 Conditions Part 1 Environmental Classification of Parameters and their Severities Environmental Conditions Part 1 Classification of (First Revision) Environmental Parameters and their Severities 13. IS 15297 : 2018/ISO 6103 : 2014 26 Nov 2018 IS 15297 : 2013/ISO 6103 : 26 Nov 2018 Bonded Abrasive Products – 2005 Bonded Abrasive Permissible Unbalances of Grinding Products – Permissible Wheels as Delivered – Static Testing Unbalances of Grinding Wheels as Delivered – Static (Second Revision) Testing (First Revision) 14. IS/ISO 15676 : 2016 Cardiovascular 26 Nov 2018 IS/ISO 15676 : 2005 26 Nov 2018 Implants and Artificial Organs – Cardiovascular Implants and Requirements for Single-use Tubing Artificial Organs – Packs for Cardiopulmonary Bypass Requirements for Single-use and Extracorporeal Membrane Tubing Packs for Oxygenation (ECMO) Cardiopulmonary Bypass and Extracorporeal Membrane (First Revision) Oxygenation (ECMO) 15. IS 16806 (Part 1) : 2018/ISO 29042-1: 26 Nov 2018 NA NA 2008 Safety of Machinery – Evaluation of the Emission of Airborne Hazardous Substances Part 1 Selection of Test Methods 16. IS 16806 (Part 3) : 2018/ISO 29042-3: 26 Nov 2018 NA NA 2009 Safety of Machinery – Evaluation of the Emission of Airborne Hazardous Substances Part 3 Test Bench Method for the Measurement of the Emission Rate of a Given Pollutant 17. IS 16806 (Part 9) : 2018/ISO 29042-9: 26 Nov 2018 NA NA 2011 Safety of Machinery – Evaluation of the Emission of Airborne Hazardous Substances Part 9 Decontamination Index 18. IS 16809 (Part 1) : 2018/ISO 14122-1: 26 Nov 2018 NA NA 2016 Safety of Machinery – Permanent Means of Access to Machinery Part 1 Choice of Fixed Means and General Requirements of Access 19. IS 16811 : 2018/ISO 14120 : 2015 26 Nov 2018 NA NA Safety of Machinery – Guards – General Requirements for the Design and Construction of Fixed and Movable Guards8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 20. IS 16812 : 2018/ISO 14119 : 2013 26 Nov 2018 NA NA Safety of Machinery – Interlocking Devices Associated with Guards – Principles for Design and Selection 21. IS 16834 (Part 1) : 2018/ISO 14123-1: 26 Nov 2018 NA NA 2015 Safety of Machinery – Reduction of Risks to Health Resulting from Hazardous Substances Emitted by Machinery Part 1 Principles and Specifications for Machinery Manufacturers 22. IS 16834 (Part 2) : 2018/ISO 14123-2: 26 Nov 2018 NA NA 2015 Safety of Machinery – Reduction of Risks to Health Resulting from Hazardous Substances Emitted by Machinery Part 2 Methodology Leading to Verification Procedures 23. IS 16835 (Part 3) : 2018/ISO 13856-3: 26 Nov 2018 NA NA 2013 Safety of Machinery – Pressure- Sensitive Protective Devices Part 3 General Principles for Design and Testing of Pressure-Sensitive Bumpers, Plates, Wires and Similar Devices 24. IS 16862 : 2018/IEC/PAS 63015 : 26 Nov 2018 NA NA 2016 Definition of ‘Low-Halogen’ for Electronic Products 25. IS 16893 (Part 1) : 2018/IEC 62660-1: 26 Nov 2018 NA NA 2010 Secondary Lithium-Ion Cells for the Propulsion of Electric Road Vehicles Part 1 Performance Testing 26. IS 16893 (Part 2) : 2018/IEC 62660-2: 26 Nov 2018 NA NA 2010 Secondary Lithium-Ion Cells for the Propulsion of Electric Road Vehicles Part 2 Reliability and Abuse Testing 27. IS 17044 : 2018/ISO 240 : 2016 26 Nov 2018 IS 6285 : 1971 Dimensions 26 Nov 2018 Milling Cutters – Interchangeability for Interchangeability of Dimensions for Cutter Arbors or Milling Cutters and Milling Cutter Mandrels Arbors with Key Drive IS 6310 : 1971 Dimensions for Interchangeability of Milling Cutters and Milling Arbors with Tenon Drive 28. IS/ISO/TS 22220 : 2011 Health 26 Nov 2018 NA NA Informatics – Identification of Subjects of Health Care 29. IS/ISO 23500 : 2014 Guidance for the 26 Nov 2018 NA NA Preparation and Quality Management of Fluids for Haemodialysis and Related Therapies¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 9 30. IS/IEC 61170 : 1993 Radiotherapy 26 Nov 2018 NA NA Simulators – Guidelines for Functional Performance Characteristics 31. IS/IEC/TS 62556 : 2014 Ultrasonics – 26 Nov 2018 NA NA Field Characterization – Specification and Measurement of Field Parameters for High Intensity Therapeutic Ultrasound (HITU) Transducers and Systems Copies of these standards are available for sale with Bureau of Indian Standards, Manak Bhawan, 9 Bahadur Shah Zafar Marg, New Delhi-110002 ; Regional Offices: Kolkata, Chandigarh, Chennai, Mumbai and Branch Offices: Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore, Guwahati, Hyderabad, Jaipur, Nagpur, Patna, Pune, Kochi. Online purchase of Indian Standards can be made at http://www.standardsbis.in. [Ref: PUB/3/3/2018-19] C.B. SINGH, Addl. Director General अअअअििििधधधधससससचचूूचचूू ननननाााा नई (cid:30)द(cid:31) ली, 27 नव9बर, 2018 ककककाााा.... आआआआ.... 5555888877774444 ((((अअअअ))))....---- भारतीय मानक (cid:17) यूरो िनयम, 1987 के िनयम 7 के उपिनयम (1) के खंड (ख) के अनुसरण म. भारतीय मानक (cid:17)य ूरो एतद ्4ारा अिधसूिचत करता ह ै(cid:30)क िजन भारतीय मानक$ के िववरण नीचे अनुसूची म. (cid:30)दए गए ह 2वे A थािपत हो गये ह।2 (cid:18)(cid:18)(cid:18)(cid:18)मममम (cid:22)(cid:22)(cid:22)(cid:22)थथथथ ााााििििपपपपतततत भभभभााााररररततततीीीीयययय ममममााााननननकककक ((((कककक(cid:25)(cid:25)(cid:25)(cid:25))))) कककक(cid:27)(cid:27)(cid:27)(cid:27) सससस(cid:21)(cid:21)(cid:21)(cid:21)ंंंं यययय ाााा (cid:22)(cid:22)(cid:22)(cid:22)थथ थथ ााााििििपपपपतततत ििििततततििििथथथथ भभभभााााररररततततीीीीयययय ममममााााननननकककक((((कककक(cid:25)(cid:25)(cid:25)(cid:25))))) जजजजोोोो """"कककक रररर#### हहहहोोोोनननन ेे ेे रररर#### हहहहोोोोनननन ेे ेेकककक(cid:27)(cid:27)(cid:27)(cid:27) ििििततततििििथथथथ सससस(cid:21)(cid:21)ंं(cid:21)(cid:21)ंं यय यय ाााा ववववषषषष (cid:30)(cid:30) (cid:30)(cid:30)औऔऔऔरररर शशशशीीीीषषषष(cid:30)क(cid:30)क(cid:30)क(cid:30)क हहहह,,&&,,&& अअअअगगगगरररर हहहह,,,,&&&& कककक(cid:27)(cid:27)(cid:27)(cid:27) सससस(cid:21)(cid:21)ंं(cid:21)(cid:21)ंं यय यय ाााा ववववषषषष(cid:30) (cid:30) (cid:30) (cid:30) औऔऔऔरररर शशशशीीीीषषषष(cid:30)क(cid:30)क(cid:30)क(cid:30)क ((((1111)))) ((((2222)))) ((((3333)))) ((((4444)))) ((((5555)))) 1. आई एस 1956 (भाग 2) : 2018 लौह 26 नव9बर 2018 आई एस 1956 (भाग 2) : 1976 26 नव9बर 2018 एवं इAपात क(cid:13) पाBरभािषक श(cid:17)दावाली लौह एवं इAपात क(cid:13) पाBरभािषक भाग 2 इAपात का िनमा(cid:28)ण श(cid:17)दावाली भाग 2 इAपात का (दसू रा पुनरी!ण) िनमा(cid:28)ण (पहला पुनरी!ण) 2. आई एस 4463 : 2018 JKा त9बाकू 26 नव9बर 2018 आई एस 4463 : 1973 JKा 26 नव9बर 2018 Lलेक — िविशिM त9बाकू, (cid:14)ौNोिगक (दसू रा पुनरी!ण) (पहला पुनरी!ण) 3. आई एस 11172 (भाग 1) : 2018/आई 26 नव9बर 2018 आई एस 11172 (भाग 1) : 1985 26 नव9बर 2018 संQयाRमक Sप से िनयंि#त मशीन एस ओ 10889-1 : 2004 बेलनाकार टू(cid:31)स (उपकरण िAथर (cid:14)कार) के िलए 8पडुली वाले औजार धारक भाग 1 टूल शंकु के िलए िसफाBरश. बेलनाकार 8पडुली, Aथािनत बोर — भाग 1 बेलनाकार 8पडुली िविशM (पहला पुनरी!ण) 4. आई एस 11201 : 2018 शक(cid:28)रा उNोग 26 नव9बर 2018 आई एस 11201 : 1985 शक(cid:28)रा 26 नव9बर 2018 के िलए ग&ा /8शग रोलस(cid:28) — िविशिM उधोग के िलए ग&ा /8शग रोलस(cid:28) (पहला पुनरी!ण) — िविशिM10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 5. आई एस 11424 : 2018/आई ई सी 26 नव9बर 2018 आई एस 11424 : 1985/आई ई सी 26 नव9बर 2018 61239 : 1993 परमाणु उपकरण — पब 460 : 1974 गामा-रे 8AकBटलेशन िडटेUटर$ (रैिखक पुवTषण के उपयोग के िलए पोटTबल गामा पैमाने के यं#) के साथ पोटबT ल िव(cid:30)करण मीटर और AपेUVोमीटर— (cid:14)ॉAपे8Uटग िव(cid:30)करण मीटर — पBरभाषाए,ँ आवYयकताए ंऔर अंशांकन िविशिM (पहला पुनरी!ण) 6. आई एस 11605 : 2018 शक(cid:28)रा उघोग 26 नव9बर 2018 आई एस 11605 : 1986 शक(cid:28)रा 26 नव9बर 2018 म. उपयोग (cid:30)कए जाने वाले सामूिहक उNोग म. उपयोग (cid:30)कए जाने वाल े (cid:14)कार के के\]ापसारक मशीन के िलए सामूिहक (cid:14)कार के के\]ापसारक बुनी (जाल) (cid:14)कार के समथ(cid:28)न लाईन$ के मशीन के िलए बुनी (जाल) (cid:14)कार के िलए िविशिM समथ(cid:28)न लाईन$ के िलए िविशिM (पहला पुनरी!ण) 7. आई एस 13450 (भाग 2/अनुभाग 62) 26 नव9बर 2018 लागू नहb लागू नहb : 2018/आई ई सी 60601-2-62 : 2013 िच(cid:30)कRसीय िवNुत उपAकर भाग 2 बुिनयादी सुर!ा और आवYयक काय(cid:28) िन^पादन के िलए िवशेष आवYयकता_ अनुभाग 62 उ‘ तीaता िच(cid:30)कRसीय अ(cid:31)Vासाउंड (एच आई टी यू) उपकरण 8. आई एस/आई एस ओ 13959 : 2014 26 नव9बर 2018 लागू नहb लागू नहb हमे ोडायिलसीस और संबंिधत उपचार के िलए पानी 9. आई एस 14458 (भाग 4) : 2018 26 नव9बर 2018 लागू नहb लागू नहb पहाड़ी !े# क(cid:13) Bरट8ेनग दीवार. — माग(cid:28)दशd िसeांत भाग 4 बै\डेड शु^क पRथर िचनाई क(cid:13) दीवार$ का िनमाण(cid:28) 10. आई एस 14458 (भाग 5) : 2018 26 नव9बर 2018 लागू नहb लागू नहb पहाड़ी !े# क(cid:13) Bरट8ेनग दीवार. — माग(cid:28)दशd िसeांत भाग 5 सीम.ट पRथर िचनाई क(cid:13) दीवार$ का िनमा(cid:28)ण 11. आई एस 14667 : 2018 चीनी उNोग 26 नव9बर 2018 आई एस 14667 : 1999 चीनी 26 नव9बर 2018 क(cid:13) जाने वाली वाहक किड़याँ और उNोग म. (cid:14)युi वाहक किड़याँ और पhीयां — िविशिM पhीयां — िविशिM (पहला पुनरी!ण) 12. आई एस 15287 (भाग 3) : 2018/आई 26 नव9बर 2018 आई एस 15287 (भाग 3) : 26 नव9बर 2018 एस ओ 6344-3 : 2013 लेिपत 2003/आई एस ओ 6344-3 : अपघष(cid:28)क — कण साइज का िवjेषण 1998 लेिपत अपघष(cid:28)क — कण भाग 3 बृहत रोडी पी240 से पी2500 साइज का िवjेषण भाग 3 बृहत तक म. कण साइज िवतरण kात करना रोडी पी240 से पी2500 तक म. (पहला पुनरी!ण)¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 11 कण साइज िवतरण kात करना 13. आई एस 15504 : 2018/आई एस ओ 26 नव9बर 2018 आई एस 15504 : 2004/आई एस 26 नव9बर 2018 7001 : 2007 nा(cid:30)फक (cid:14)तीक — जन ओ 7001 : 1990 जन सूचना सूचना (cid:14)तीक (cid:14)तीक (पहला पुनरी!ण) 14. आई एस 16489 : 2018 सोयदoुध 26 नव9बर 2018 लागू नहb लागू नहb (नॉन डये री उRपाद ) — िविशिM 15. आई एस 16827 : 2018/आई एस 26 नव9बर 2018 लागू नहb लागू नहb ओ/आई ई सी/पी ए एस 16898 : 2012 वैNुत चािलत सड़क वाहन — ि4तीयक िलिथयम-आयाम सैल के आयाम एवं अिभनाम 16. आई एस 16847 : 2018/आई एस ओ 26 नव9बर 2018 लागू नहb लागू नहb 6565 : 2015 त9बाकू एवं त9बाकू उRपाद — िसगरट$ एवं (cid:30)फ(cid:31)टर राड के (cid:14)ैशर pाप क(cid:13) pा (cid:14)ितरोिधता — मानक शतT एवं मापन 17. आई एस 16852 : 2018/आई एस 26 नव9बर 2018 लागू नहb लागू नहb ओ/टी एस 11366 : 2011 पेVोिलयम और संबंिधत उRपाद — Aटीम, गैस और संयुi साइ(cid:30)कल टबा(cid:28)इन के िलए qेहन तेल$ क(cid:13) इन-सrव8सग के िलए माग(cid:28)दश(cid:28) 18. आई एस 16858 : 2018/आई एस ओ 26 नव9बर 2018 लागू नहb लागू नहb 23853 : 2004 /ेन — 8Aलगस(cid:28) एवं संकेत करने वाले का (cid:14)िश!ण 19. आई एस 16894 (भाग 1) : 2018/आई 26 नव9बर 2018 लागू नहb लागू नहb ई सी 62485-1 : 2015 ि4तीयक बैटBरयाँ एवं बैटरी संAथापन$ हते ु सुर!ा अपे!ाएँ भाग 1 सामा\य सुर!ा सूचना 20. आई एस 16894 (भाग 2) : 2018/आई 26 नव9बर 2018 लागू नहb लागू नहb ई सी 62485-2 : 2010 ि4तीयक बैटBरयाँ एवं बैटरी संAथापन$ हते ु सुर!ा अपे!ाएँ भाग 2 िAथर बैटBरयाँ 21. आई एस 16894 (भाग 3) : 2018/आई 26 नव9बर 2018 लागू नहb लागू नहb ई सी 62485-3 : 2014 ि4तीयक बैटBरयाँ एवं बैटरी संAथापन$ हते ु सुर!ा अपे!ाएँ भाग 3 संकष(cid:28)ण बैटBरयाँ 22. आई एस 16909 : 2018 गथ(cid:28) िगयर 26 नव9बर 2018 लागू नहb लागू नहb लुिsक.tस — िविशिM 23. आई एस 17050 : 2018/आई ई सी 26 नव9बर 2018 लागू नहb लागू नहb12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 62262 : 2002 यांि#क(cid:13) (cid:14)भाव$ से सुर!ा हते ु िवNुतीय उपकरण$ के िलए आवेMाक$ से िमलने वाली सुर!ा क(cid:13) कोBट (आई के कोड ) 24. आई एस/आई एस ओ 17822-1 : 26 नव9बर 2018 लागू नहb लागू नहb 2014 इन िवVो डायuोिAटक टेAट िसAटम — माइ/ोिबयल रोगजनक$ क(cid:13) खोज़ और पहचान के िलए vािलटBेटव \यूिUलक एिसड पर आधाBरत इन िवVो परी!ा (cid:14)(cid:30)/याएं भाग 1 सामा\य आवYयकताएं, िनयम और पBरभाषाएं 25. आई एस/आई एस ओ 19011 : 2018 26 नव9बर 2018 आई एस/आई एस ओ 19011 : 26 नव9बर 2018 (cid:14)बंध एवं पeितय$ क(cid:13) आिडwटग के िलए 2011 संपरी!ण (cid:14)बंध एवं (cid:30)दशािनदशT पeितय$ क(cid:13) माग(cid:28)दrशका (दसू रा पुनरी!ण) (पहला पुनरी!ण) 26. आई एस/आई एस ओ/आई ई सी 26 नव9बर 2018 लागू नहb लागू नहb 20000-3 : 2012 सूचना (cid:14)ौघोिगक(cid:13)— सेवा (cid:14)बंध भाग 3 आईएसओ/आईईसी 20000-1 क(cid:13) िवषय !े# पBरभाषा और (cid:14)योzयता पर माग(cid:28)दश(cid:28)न 27. आई एस/आई ई सी 60168 : 2000 26 नव9बर 2018 आई एस 2544 : 1973 1000 लागू नहb 1000 वो(cid:31)ट से अिधक अिभिहत वो(cid:31)टता वो(cid:31)ट से अिधक अिभिहत वो(cid:31)टता तं# हते ु पोrसलेन पोAट तं# हते ु आंतBरक एवं बा{ चीनी िमhी िवNुतरोधक$ पर पBर!ण — एवं कांच के पोrसलेन पोAट िविशिM िवNुतरोधक$ पर पBर!ण (पहला पुनरी!ण) 28. आई एस/आई ई सी 60255-121 : 26 नव9बर 2018 लागू नहb लागू नहb 2014 मापन क(cid:13) Bरले एवं संर!ण उपकरण भाग 121 दरू ी संर!ण हते ु काय(cid:28)कारी अपे!ाएँ 29. आई एस/आई ई सी 60794-2-10 : 26 नव9बर 2018 लागू नहb लागू नहb 2011 (cid:14)कािशक तंतु केब(cid:31)स भाग 2 इंडोर (cid:14)कािशक तंतु केब(cid:31)स अनुभाग 10 8स|लेUस एवं डुपलेUस केब(cid:31)स के िलए पBरवाBरय िविशिM 30. आई एस/आई ई सी 61168 : 1993 26 नव9बर 2018 लागू नहb लागू नहb रेिडयोथेरेपी िसमुलेटर — काया(cid:28)Rमक (cid:14)दश(cid:28)न िवशेषता_ 31. आई एस/आई ई सी 62353 : 2014 26 नव9बर 2018 आई एस/आई ई सी 62353 : 2007 26 नव9बर 2018 िच(cid:30)कRसीय िवNुत उपAकर — आवतd िच(cid:30)कRसीय िवNुत उपAकर — परी!ण एवं िच(cid:30)कRसीय िवNुत उपAकर Bरकर.ट परी!ण एवं िच(cid:30)कRसीय¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 13 क(cid:13) मर9मत के बाद परी!ण िवNतु उपAकर क(cid:13) मर9मत के बाद (पहला पुनरी!ण) परी!ण इस भारतीय मानक क(cid:13) (cid:14)ितयां भारतीय मानक (cid:17)यूरो, मानक भवन, 9, बहादरु शाह ज़फर माग(cid:28), नई (cid:30)द(cid:31) ली 110 002 !े#ीय काया(cid:28)लय$ : नई (cid:30)द(cid:31)ली, कोलकता, चंडीगढ़, चे&ई, मुंबई, तथा शाखा काया(cid:28)लय$: अहमदाबाद, बंगलौर, भोपाल, भुवने+र, कोयंबतूर, गुवाहाटी, हदै राबाद, जयपुर, पटना, पूणे तथा कोिच म. िब/(cid:13) हते ु उपल(cid:17)ध ह2। भारतीय मानक$ को http://www.standardsbis.in 4ारा इंटरनैट पर खरीदा जा सकता ह ै। [संदभ(cid:28): PUB/3/3/2018-19] सी.बी. 8सह, अपर महािनदशे क NOTIFICATION New Delhi, the 27th November, 2018 S.O. 5874 (E).—In pursuance of clause (b) of sub-rule (1) of Rule 7 of the Bureau of Indian Standards Rules, 1987, the Bureau of Indian Standards hereby notifies that the Indian Standards, particulars of which are given in the second column of schedule hereto annexed has been established on the date indicated against it in third column. The particulars of the standards, if any, which are given in the fourth column shall also remain in force concurrently till they are cancelled on the date indicated against them in the fifth column. SCHEDULE SL No. No, Year & Title of the Indian Date of No. Year & Title of the Date of Standards Established Indian Standards to be Cancellation Establishment Cancelled, if any (1) (2) (3) (4) (5) 1. IS 1956 (Part 2) : 2018 Glossary of 26 Nov 2018 IS 1956 (Part 2) : 1976 26 Nov 2018 Terms Relating to Iron and Steel Glossary of Terms Relating to Part 2 Steel Making Iron and Steel Part 2 Steel Making (Second Revision) (First Revision) 2. IS 4463 : 2018 Hookah Tobacco, 26 Nov 2018 IS 4463 : 1973 Specification 26 Nov 2018 Flake Type – Specification for Hookah Tobacco, Manufactured (Second Revision) (First Revision) 3. IS 11172 (Part 1) : 2018/ISO 26 Nov 2018 IS 11172 (Part 1) : 1985 26 Nov 2018 10889-1 : 2004 Tool Holders with Recommendations for tool Cylindrical Shank Part 1 Shanks for Numerically Cylindrical Shank, Location Bore – Controlled Machine Tools Specification (Tool Stationaty Type ) Part 1 Cylindrical Shank (First Revision) 4. IS 11201 : 2018 Cane Crushing 26 Nov 2018 IS 11201 : 1985 Specification 26 Nov 2018 Rollers for Sugar Industry – for Cane Crushing Rollers for Specification Sugar Industry (First Revision) 5. IS 11424 : 2018/IEC 61239 : 1993 26 Nov 2018 IS 11424 : 1985/IEC Pub 460: 26 Nov 2018 Nuclear Instrumentation – Portable 1974 Specification for Gamma Radiation Meters and Portable Prospecting Spectrometers Used for Radiation meters with Prospecting–Definitions, Gamma-Ray Scintillation Requirements and Calibration Detectors (Linear Scale Instruments) (First Revision)14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 6. IS 11605 : 2018 Specification for 26 Nov 2018 IS 11605 : 1986 Specification 26 Nov 2018 Woven (Mesh) Type Supporting for Woven (Mesh) Type Liners for Batch Type Centrifugal Supporting Liners for Batch Machines Used in Sugar Industry Type Centrifugal Machines Used in Sugar Industry (First Revision) 7. IS 13450 (Part 2/Sec 62) : 2018/IEC 26 Nov 2018 NA NA 60601-2-62 : 2013 Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 62 High Intensity Therapeutic Ultrasound (HITU) Equipment 8. IS/ISO 13959 : 2014 Water for 26 Nov 2018 NA NA Haemodialysis and Related Therapies 9. IS 14458 (Part 4) : 2018 Retaining 26 Nov 2018 NA NA Wall for Hill Areas – Guidelines Part 4 Construction of Banded Dry Stone Masonry Walls 10. IS 14458 (Part 5) : 2018 Retaining 26 Nov 2018 NA NA Wall for Hill Areas – Guidelines Part 5 Construction of Cement Stone Masonry Walls 11. IS 14667 : 2018 Conveyor Chains 26 Nov 2018 IS 14667 : 1999 Conveyor 26 Nov 2018 and Slats Used in Sugar Industry – Chains and Slats Used in Specification Sugar Industry – Specification (First Revision) 12. IS 15287 (Part 3) : 2018/ISO 6344- 26 Nov 2018 IS 15287 (Part 3) : 2003/ISO 26 Nov 2018 3 : 2013 Coated Abrasives – Grain 6344-3 : 1998 Coated Size Analysis Part 3 Determination Abrasives – Grain Size of Grain Size Distribution of Analysis Part 3 Determination Microgrits P240 to P2500 of Grain Size Distribution of Microgrits P240 to P2500 (First Revision) 13. IS 15504 : 2018/ISO 7001 : 2007 26 Nov 2018 IS 15504 : 2004/ISO 7001 : 26 Nov 2018 Graphical Symbols – Public 1990 Public Information Information Symbols Symbols (First Revision) 14. IS 16489: 2018 Soymilk (Non- 26 Nov 2018 NA NA Dairy Product) – Specification. 15. IS 16827 : 2018/ISO/IEC/PAS 26 Nov 2018 NA NA 16898 : 2012 Electrically Propelled Road Vehicles – Dimensions and Designation of Secondary Lithium- Ion Cells 16. IS 16847 : 2018/ISO 6565 : 2015 26 Nov 2018 NA NA Tobacco and Tobacco Products – Draw Resistance of Cigarettes and Pressure Drop of Filter Rods – Standard Conditions and Measurement¹Hkkx IIµ[k.M 3(ii)º Hkkjr dk jkti=k % vlk/kj.k 15 17. IS 16852 : 2018/ISO/TS 11366 : 26 Nov 2018 NA NA 2011 Petroleum and Related Products – Guidance for In- Servicing of Lubricating Oils for Steam, Gas and Combined-Cycle Turbines 18. IS 16858 : 2018/ISO 23853 : 2004 26 Nov 2018 NA NA Cranes – Training of Slingers and Signallers 19. IS 16894 (Part 1) : 2018/IEC 26 Nov 2018 NA NA 62485-1 : 2015 Safety Requirements for Secondary Batteries and Battery Installations Part 1 General Safety Information 20. IS 16894 (Part 2) : 2018/IEC 26 Nov 2018 NA NA 62485-2 : 2010 Safety Requirements for Secondary Batteries and Battery Installations Part 2 Stationary Batteries 21. IS 16894 (Part 3) : 2018/IEC 26 Nov 2018 NA NA 62485-3 : 2014 Safety Requirements for Secondary Batteries and Battery Installations Part 3 Traction Batteries 22. IS 16909 : 2018 Girth Gear 26 Nov 2018 NA NA Lubricants – Specification 23. IS 17050 : 2018/IEC 62262 : 2002 26 Nov 2018 NA NA Degrees of Protection Provided by Enclosures for Electrical Equipment Against External Mechanical Impacts (IK Code) 24. IS/ISO 17822-1 : 2014 In vitro 26 Nov 2018 NA NA Diagnostic Test Systems – Qualitative Nucleic Acid-Based in Vitro Examination Procedures for Detection and Identification of Microbial Pathogens Part 1 General Requirements, Terms and Definitions 25. IS/ISO 19011 : 2018 Guidelines for 26 Nov 2018 IS/ISO 19011 : 2011 26 Nov 2018 Auditing Management Systems Guidelines for Auditing Management Systems (Second Revision) (First Revision) 26. IS/ISO/IEC 20000-3 : 2012 26 Nov 2018 NA NA Information Technology – Service Management Part 3 Guidance on Scope Definition and Applicability of ISO/IEC 20000-1 27. IS/IEC 60168 : 2000 Tests on 26 Nov 2018 IS 2544 : 1973 Specification 26 Nov 2018 Indoor and Outdoor Post Insulators for Porcelain Post Insulators of Ceramic Material or Glass for for Systems with Nominal Systems with Nominal Voltages Voltages Greater Than 1 000 Greater Than 1 000 V V (First Revision)16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART II—SEC. 3(ii)] 28. IS/IEC 60255-121 : 2014 26 Nov 2018 NA NA Measuring Relays and Protection Equipment Part 121 functional Requirements for Distance Protection 29. IS/IEC 60794-2-10 : 2011 Optical 26 Nov 2018 NA NA Fibre Cables Part 2 Indoor Optical Fibre Cables Section 10 Family Specification for Simplex and Duplex Cables 30. IS/IEC 61168 : 1993 Radiotherapy 26 Nov 2018 NA NA Simulators – Functional Performance Characteristics 31. IS/IEC 62353 : 2014 Medical 26 Nov 2018 IS/IEC 62353 : 2007 Medical 26 Nov 2018 Electrical Equipment – Recurrent Electrical Equipment – Test and Test after Repair of Recurrent Test and Test after Medical Electrical Equipment Repair of Medical Electrical Equipment (First Revision) Copies of these standards are available for sale with Bureau of Indian Standards, Manak Bhawan, 9 Bahadur Shah Zafar Marg, New Delhi-110002 ; Regional Offices: Kolkata, Chandigarh, Chennai, Mumbai and Branch Offices: Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore, Guwahati, Hyderabad, Jaipur, Nagpur, Patna, Pune, Kochi. Online purchase of Indian Standards can be made at http://www.standardsbis.in. [Ref: PUB/3/3/2018-19] C.B. SINGH, Addl. Director General Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research