In pursuance of sub paragraph 2 of paragraph 5 of Scheme I of Schedule II of Bureau of Indian Standards Conformity Assessment Regulations

## Policy Analysis Report: Amendment to Bureau of Indian Standards Conformity Assessment Regulations **1. Executive Summary:** This report analyzes an amendment to the Bureau of Indian Standards (BIS) Conformity Assessment Regulations, 2018, specifically focusing on changes introduced by a notification dated February 22, 2022. This amendment, identified by No. CMD2G18, primarily updates the Schedule of the original notification CMD2G18 dated August 5th, 2021, by inserting new serial numbers and related entries specifying unit rates and applicable standards for various products. The key finding is the introduction of new product standards and associated fee structures for conformity assessment, impacting manufacturers and suppliers of these products. **2. Introduction:** This report aims to provide an informative overview of a specific amendment to the Bureau of Indian Standards (BIS) Conformity Assessment Regulations, 2018. The analysis is based solely on the provided policy text, focusing on the changes introduced by the notification dated February 22, 2022. **3. Policy Overview:** * **Amendment:** This document represents an amendment to the Bureau of Indian Standards Conformity Assessment Regulations, 2018, specifically modifying the notification CMD2G18 dated 05th August, 2021. * **Core Objective(s):** The core objective of this amendment, as inferred from the text, is to update and expand the list of products covered under the BIS conformity assessment scheme, along with their associated fee structures for testing and certification. This aims to ensure adherence to specified Indian Standards (IS) for the newly added products. **4. Background and Rationale:** * **Amendment Rationale:** The amendment likely addresses the need to incorporate new products and updated standards into the existing conformity assessment framework. This ensures that a wider range of goods comply with quality and safety benchmarks, potentially driven by technological advancements, evolving market needs, or the introduction of new Indian Standards. **5. Key Provisions / Changes:** This amendment *specifically* focuses on changes to the SCHEDULE of the notification CMD2G18 dated 05th August 2021. * **What is being changed:** The SCHEDULE of the original notification is being appended with new serial numbers and entries after serial number 1316. * **New Rule/Provision:** The amendment introduces new product entries in the Schedule, each specifying: * Serial Number (e.g., 1317, 1318, etc.) * Relevant Indian Standard (IS) number (e.g., IS 17334:2019, IS 9573 Part 1:2017) * Unit of measurement (e.g., piece, meter, metric ton, kVA, kg) * "SLAB1" and "SLAB2" rates, which likely represent the unit rate charges for large and medium scale enterprises, respectively. These are provided in Rupees. * "SLAB3" rate applies for micro and small scale enterprises * Applicability to large, medium, and small enterprises ("All" is mentioned for most standards). * Effective Date: 18022022 (February 18, 2022 - likely a typo and should be 18th February 2022). * **Difference/Effect of the Change:** The amendment expands the scope of products subject to mandatory BIS certification by adding new IS standards. This means manufacturers and suppliers of these newly listed products must now undergo conformity assessment as per BIS regulations, including paying the specified fees, to legally sell their goods in the Indian market. **6. Target Audience and Stakeholders:** The primary target audience and stakeholders directly affected by this amendment are: * Manufacturers of products corresponding to the newly listed Indian Standards (IS 17334:2019, IS 9573 Part 1:2017, IS 9962:1981, IS 17728:2021, IS 16653:2017, IS 15030:2001, IS 17480:2020, IS 7328:2020, IS 3401:1992, IS 1180 Part 3:2021 and IS 17546:2021). * Suppliers and distributors of these products. * Micro, Small, Medium, and Large Enterprises involved in the production and trade of these products. **7. Implementation Aspects (Inferred):** * **Responsible Agency/Bodies:** The Bureau of Indian Standards (BIS) is the responsible body for implementing and enforcing these changes, under the Department of Consumer Affairs. * **Timelines/Procedures:** The amendment came into effect on February 18, 2022 (or possibly intended to be 18th February). Manufacturers of the newly listed products are expected to initiate the BIS certification process to comply with the updated regulations. This involves applying for certification, undergoing testing, and adhering to the specified Indian Standards. The procedures for certification are outlined in the Bureau of Indian Standards Conformity Assessment Regulations, 2018. * **Amendment-Specific Implementation:** Manufacturers must assess the relevant SLAB and apply for the appropriate charges to be certified. **8. Expected Outcomes / Impact of Changes:** The intended outcome of these specific changes is to: * Ensure that products adhering to the newly added Indian Standards meet the prescribed quality and safety benchmarks. * Expand the scope of products under mandatory BIS certification, promoting consumer protection. * Potentially increase compliance costs for manufacturers of the affected products. * Create a more standardized and reliable market for the specified products. **9. Conclusion:** The amendment to the BIS Conformity Assessment Regulations, enacted on February 22, 2022, expands the scope of mandatory certification by incorporating new Indian Standards. This change directly affects manufacturers and suppliers of these newly listed products, requiring them to adhere to BIS certification procedures. This will lead to a greater number of products being tested under the Indian Standards program.

Key Entities Referenced