In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules

## Policy Analysis Report: Amendment to Indian Standard IS 11928:2023 **1. Executive Summary:** This report analyzes an amendment to the Indian Standard IS 11928:2023, focusing on "Textiles - Roundslings Made of Man-Made Fibres for General Service - Specification First Revision." The Bureau of Indian Standards (BIS) has notified Amendment No. 1, establishing it on June 9, 2025, with a force period until December 8, 2025. This report outlines the amendment's background, key changes, affected stakeholders, inferred implementation aspects, and expected impact on the manufacturing and supply of textile roundslings. The report is based solely on the provided policy text. **2. Introduction:** The purpose of this report is to provide an informative overview of Amendment No. 1 to Indian Standard IS 11928:2023, as notified by the Bureau of Indian Standards (BIS) on June 17, 2025. The analysis is strictly based on the information contained within the provided policy text. **3. Policy Overview:** * **Original Policy:** IS 11928:2023, "Textiles - Roundslings Made of Man-Made Fibres for General Service - Specification First Revision." * **Core Objective(s):** The core objective, inferred from the title, is to establish specifications for textile roundslings made of man-made fibers intended for general service. This likely includes setting standards for materials, construction, performance, and safety to ensure quality and reliability. **4. Background and Rationale:** Since this is an amendment, the rationale lies in addressing specific shortcomings or areas needing refinement within the original standard, IS 11928:2023. While the text doesn't explicitly state the reason for the amendment, it can be inferred that Amendment No. 1 is intended to either: correct errors, update requirements based on new technology or industry practices, or address specific concerns raised by stakeholders after the initial standard's publication. **5. Key Provisions / Changes:** * **Specific Part of Original Policy Changed:** The provided text does not specify exactly which clause of IS 11928:2023 is affected. The text simply states it is Amendment No. 1. * **New Rule/Provision:** The text establishes Amendment No. 1 to IS 11928:2023. The specific change cannot be determined from the provided text. * **Difference/Effect of the Change:** Without the full text of Amendment No. 1 and the original standard, it is impossible to accurately determine the exact difference or the effect of the change. However, it can be anticipated that the amendment is intended to improve the specifications, clarify requirements, or introduce new provisions related to the manufacturing or testing of textile roundslings made of man-made fibers. **6. Target Audience and Stakeholders:** Based on the text, the primary target audience and stakeholders are: * **Manufacturers of textile roundslings made of man-made fibers:** They must adhere to the updated specifications outlined in IS 11928:2023 as amended. * **Suppliers of materials used in the manufacturing of textile roundslings:** The amendment may affect material requirements or testing procedures. * **Users of textile roundslings:** Changes to the standard could affect the performance and safety of the product. * **Bureau of Indian Standards (BIS):** As the issuing body, BIS is responsible for enforcing the standard and ensuring compliance. **7. Implementation Aspects (Inferred):** * **Responsible Agency/Bodies:** The Bureau of Indian Standards (BIS) is the responsible body for implementing and enforcing the standard. Chitra Gupta, Scientist G DDG Hallmarking and Training at BIS, is specifically mentioned. * **Timelines:** Amendment No. 1 was established on June 9, 2025, and the standard without the amendment will remain in force until December 8, 2025. This means that after December 8, 2025, all roundslings must adhere to the amended standard. It implies a six-month transition period for manufacturers to comply with the new amendment. * Manufacturers would need to review amendment No. 1 and align processes to be compliant for standards established after December 8, 2025 **8. Expected Outcomes / Impact of Changes:** The expected outcomes of Amendment No. 1, although the specifics are unknown due to limited text, are likely to: * Improve the quality and reliability of textile roundslings manufactured in accordance with IS 11928:2023. * Enhance safety for users of these roundslings. * Promote standardization and consistency within the industry. * Address specific concerns or issues identified since the original standard was published. **9. Conclusion:** Amendment No. 1 to Indian Standard IS 11928:2023 represents a refinement of existing specifications for textile roundslings made of man-made fibers. While the specific changes introduced by the amendment are not detailed in the provided text, the notification indicates a commitment by the Bureau of Indian Standards to maintain up-to-date and relevant standards for this product category. The amendment's implementation will require manufacturers to review and adapt their processes, ensuring compliance by December 8, 2025. Further research into the actual text of Amendment No. 1 and the original IS 11928:2023 is required to fully understand the scope and impact of these changes.

Key Entities Referenced