## Report on Amendments to Indian Standards - June 4, 2021
**1. Executive Summary:**
This report analyzes notifications issued by the Bureau of Indian Standards (BIS) on June 4, 2021, regarding amendments to several Indian Standards. The notifications pertain to updates and revisions across various industrial sectors, including automotive, mining, power, gas cylinders, and fire safety. Key findings highlight that these amendments ensure updated safety and performance specifications for various products and materials, maintaining compliance with evolving industry needs.
**2. Introduction:**
The purpose of this report is to provide an overview and analysis of amendments to Indian Standards as notified by the Bureau of Indian Standards (BIS) on June 4, 2021. This analysis is based solely on the provided policy text.
**3. Policy Overview:**
This document details *amendments* to existing Indian Standards. The core objective of these amendments, based on the provided text, is to update and refine existing standards to reflect current technological advancements, safety requirements, and industry best practices. The standards amended cover diverse sectors, demonstrating a broad effort to maintain relevant and effective quality benchmarks across Indian industries.
**4. Background and Rationale:**
The amendments likely address the need to update existing Indian Standards in response to:
* Technological advancements in manufacturing and material science.
* Evolving safety requirements and regulations in various industries.
* Feedback and experiences gained from the practical application of existing standards.
* A need to align Indian Standards with international best practices and emerging global standards.
Each specific amendment likely targets a particular area of concern or improvement within its respective standard, ensuring the continued relevance and effectiveness of the standard.
**5. Key Provisions / Changes:**
The document details amendments to the following Indian Standards:
* **IS 3431 : 1982:** Amendment No. 3 concerning "Specification for Steel for the Manufacture of Volute, Helical and Laminated Springs for Automotive Suspension." This amendment is valid until 20 Nov 2021.
* **IS 3976 : 2018:** Amendment No. 1 concerning "Safety Rubber Canvas Boots for Miners Specification." This amendment is valid until 20 Feb 2022.
* **IS 4199 : 2001:** Amendment No. 1 concerning "Toilet Soap, Liquid Specification." This amendment is valid until 20 Aug 2021.
* **IS 4398 : 1994:** Amendment No. 3 concerning "Carbon Chromium Steel for the Manufacture of Balls, Rollers and Bearing Races." This amendment is valid until 20 Aug 2021.
* **IS 2026 Part 2 : 2010:** Amendment No. 1 concerning "Power Transformers Part 2 Temperature Rise." This amendment is valid until 02 Sept 2021.
* **IS 7285 Part 1 : 2018:** Amendment No. 2 concerning "Refillable Seamless Steel Gas Cylinders Specification Part 1 Normalized Steel Cylinders." This amendment is valid until 02 June 2023.
* **IS 7285 Part 2 : 2017:** Amendment No. 1 concerning "Refillable Seamless Steel Cylinders Specification Part 2 Quenched and Tempered Steel Cylinders with Tensile Strength Less than 1100 MPA 112 kgfmm2." This amendment is valid until 02 June 2023.
* **IS 15490 : 2017:** Amendment No. 1 concerning "Seamless Steel Cylinders for on-Board Storage of Compressed Natural Gas as a Fuel for Automotive Vehicles Specification." This amendment is valid until 02 June 2023.
* **IS 16088 : 2012:** Amendment No. 1 concerning "Chlorinated Polyvinyl Chloride CPVC Pipes for Automatic Sprinkler Fire Extinguishing System Specification." This amendment is valid until 02 June 2022.
Each of these amendments likely introduces specific changes to the technical requirements, testing procedures, or material specifications outlined in the original standards. Without the original standards and the amendment details, the *exact* nature of the changes cannot be determined from the given text. However, the text does highlight the areas targeted for revision.
**6. Target Audience and Stakeholders:**
The primary target audience and stakeholders affected by these amendments include:
* Manufacturers and suppliers of the products and materials covered by the standards (e.g., steel springs, rubber boots, toilet soap, steel cylinders, CPVC pipes, power transformers).
* Automotive industry (for steel springs and CNG cylinders).
* Mining industry (for safety boots).
* Chemical industry (for toilet soap).
* Gas cylinder manufacturers and suppliers.
* Fire safety equipment manufacturers and installers (for CPVC pipes).
* Compressed natural gas (CNG) industry.
* Consumers who use products manufactured according to these standards.
* Regulatory bodies responsible for enforcing compliance with Indian Standards.
**7. Implementation Aspects (Inferred):**
* **Responsible agency:** The Bureau of Indian Standards (BIS) is the responsible agency for establishing and notifying these amendments.
* **Timelines:** Each amendment has a specified "Date till which the standard without the amendment as mentioned in column 3 shall remain in force" (Column 4 in the Schedule). This implies a transition period for companies to comply with the updated standards.
* The text indicates that copies of the amendments are available for sale at BIS offices and can be downloaded online from http:www.standardsbis.in, suggesting a readily accessible mechanism for dissemination and implementation.
**8. Expected Outcomes / Impact of Changes:**
The expected outcomes and impact of these amendments include:
* **Improved product quality and performance:** Updated standards should lead to better quality and performance of products and materials.
* **Enhanced safety:** Amendments related to safety aspects (e.g., miners' boots, fire extinguishing systems) are likely intended to improve safety in those areas.
* **Increased competitiveness:** Compliance with updated standards can enhance the competitiveness of Indian manufacturers in domestic and international markets.
* **Greater consumer confidence:** Assurance that products meet current safety and performance benchmarks.
* **Smooth transition:** Stakeholders will need to incorporate these amendments into their manufacturing processes and quality control procedures before the 'Date till which the standard without the amendment...shall remain in force'.
**9. Conclusion:**
The notifications of amendments to Indian Standards issued by the BIS on June 4, 2021, reflect an ongoing effort to maintain and improve the quality, safety, and performance of various products and materials used across Indian industries. The amendments cover a diverse range of sectors and likely introduce specific changes to technical requirements and specifications. Stakeholders should familiarize themselves with the details of these amendments and implement them within the specified timelines to ensure compliance and benefit from the enhanced standards. The accessibility of the documents via the BIS website is crucial for effective implementation.
Key Entities Referenced
Bureau of Indian Standards: An organization that establishes and publishes Indian standards.
Bureau of Indian Standards Rules, 2018: A set of rules governing the Bureau of Indian Standards.
Indian Standards: Standards established by the Bureau of Indian Standards.
New Delhi: Location of notification and address of Bureau of Indian Standards, Union Territory of Delhi
IS 3431 : 1982: Indian Standard: Specification for Steel for the Manufacture of Volute, Helical and Laminated Springs for Automotive Suspension
IS 3976 : 2018: Indian Standard: Safety Rubber Canvas Boots for Miners Specification
IS 4199 : 2001: Indian Standard: Toilet Soap, Liquid Specification
IS 4398 : 1994: Indian Standard: Carbon Chromium Steel for the Manufacture of Balls, Rollers and Bearing Races
Manak Bhavan: Building where the Bureau of Indian Standards is located in New Delhi.
Kolkata: City with a regional office of the Bureau of Indian Standards, West Bengal
Chandigarh: City with a regional office of the Bureau of Indian Standards, Union Territory of Chandigarh
Chennai: City with a regional office of the Bureau of Indian Standards, Tamil Nadu
Mumbai: City with a regional office of the Bureau of Indian Standards, Maharashtra
Ahmedabad: City with a branch office of the Bureau of Indian Standards, Gujarat
Bengaluru: City with a branch office of the Bureau of Indian Standards, Karnataka
Bhopal: City with a branch office of the Bureau of Indian Standards, Madhya Pradesh
Bhubaneshwar: City with a branch office of the Bureau of Indian Standards, Odisha
Coimbatore: City with a branch office of the Bureau of Indian Standards, Tamil Nadu
Dehradun: City with a branch office of the Bureau of Indian Standards, Uttarakhand
Faridabad: City with a branch office of the Bureau of Indian Standards, Haryana
Ghaziabad: City with a branch office of the Bureau of Indian Standards, Uttar Pradesh
Guwahati: City with a branch office of the Bureau of Indian Standards, Assam
Hyderabad: City with a branch office of the Bureau of Indian Standards, Telangana
Jaipur: City with a branch office of the Bureau of Indian Standards, Rajasthan
Jammu: City with a branch office of the Bureau of Indian Standards, Jammu and Kashmir
Jamshedpur: City with a branch office of the Bureau of Indian Standards, Jharkhand
Lucknow: City with a branch office of the Bureau of Indian Standards, Uttar Pradesh
Nagpur: City with a branch office of the Bureau of Indian Standards, Maharashtra
Parwanoo: City with a branch office of the Bureau of Indian Standards, Himachal Pradesh
Patna: City with a branch office of the Bureau of Indian Standards, Bihar
Pune: City with a branch office of the Bureau of Indian Standards, Maharashtra
Raipur: City with a branch office of the Bureau of Indian Standards, Chhattisgarh
Rajkot: City with a branch office of the Bureau of Indian Standards, Gujarat
Kochi: City with a branch office of the Bureau of Indian Standards, Kerala
Vishakhapatanam: City with a branch office of the Bureau of Indian Standards, Andhra Pradesh
IS 2026 Part 2 : 2010: Indian Standard: Power Transformers Part 2 TemperatureRise
IS 7285 Part 1 : 2018: Indian Standard: Refillable Seamless Steel Gas Cylinders Part 1 Normalized Steel Cylinders
IS 7285 Part 2 : 2017: Indian Standard: Refillable Seamless Steel Cylinders Part 2 Quenched and Tempered Steel Cylinders with Tensile Strength Less than 1100 MPA 112 kgfmm2
IS 15490 : 2017: Indian Standard: Seamless Steel Cylinders for onBoard Storage of Compressed Natural Gas as a Fuel for Automotive Vehicles
IS 16088 : 2012: Indian Standard: Chlorinated Polyvinyl Chloride CPVC Pipes for Automatic Sprinkler Fire Extinguishing System
Department of Consumer Affairs: The department is affiliated with Bureau of Indian Standards.
रजजस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
xxxGIDHxxx
सी.जी.-डी.एxलxx.-GअID.-E1x9x0x 62021-227725
CG-DL-E-19062021-227725
ऄसाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 247] नइ ददल्ली, िुक्रिार, जून 18, 2021/ज्य ष्े ठ 28, 1943
No. 247] NEW DELHI, FRIDAY, JUNE 18, 2021/JYAISTHA 28, 1943
भारतीय मानक ब्य ूरो
(ईपभोक्त ा मामल ेजि भाग)
ऄजधसचू ना
नइ ददल्ली, 4 जून 2021
सदं भ:भ HQ-PUB014/1/2020-PUB-BIS(170).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के ईपजनयम (1) के
ऄनुसरण म ेंभारतीय मानक ब्यूरो एतद ्द्वारा ऄजधसूजचत करता ह ैआसमें संलग्न ऄनूसूची में ददये गय ेमानकों में संिोधन दकये गये हैं|
ऄनुसूची
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, िर् भतथा सिं ोधनों की सिं ोधनों की जतजथ जब तक मानक
स.ं सख्ं या एि ं जतजथ प्रजतस्ट्थापन जतजथ तीसरे स्ट्तंभ म ेंआंजगत
िीर्भक
सिं ोधन के जबना भी लाग ू
रहेगा
(1) (2) (3) (4) (5)
1 अइ एस 3431 : 1982 संिोधन संख्या 3 21 मइ 2021 20 निम्बर 2021
ऑटोमोटटि सस्ट्पेंिन के जलए जिल्लेट, हजे लकल मइ 2021
और लैजमनेटेड स्प्स्ट्प्रग्स के जनमाभण के जलए स्ट्टील
की जिजिष्टता
(दसू रा पुनरीक्षण)
2 अइ एस 3976 : 2018 संिोधन संख्या 1 21 मइ 2021 20 फरिरी 2022
3319 GI/2021 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
खजनकों के जलए रबर कैनिस के सुरक्षा जूते ─ मइ 2021
जिजिजष्ट
(छठा पुनरीक्षण)
3 अइ एस 4199 : 2001 संिोधन संख्या 1 21 मइ 2021 20 ऄगस्ट्त 2021
नहाने के द्रि साबुन ─ जिजिजष्ट मइ 2021
(तीसरा पुनरीक्षण)
4 अइ एस 4398 : 1994 संिोधन संख्या 3 21 मइ 2021 20 ऄगस्ट्त 2021
बाल, रोलर और बेयररग रेसों के जनमाभण के जलए मइ 2021
काबनभ -क्रोजमयम आस्ट्पात ─ जिजिजष्ट
(दसू रा पुनरीक्षण)
आन मानकों म ें संिोधनों की प्रजतया ाँ भारतीय मानक ब्यरू ो, मानक भिन, 9 बहादरु िाह ज़फर माग,भ नइ ददल्ली 110 002,
क्षेत्रीय कायाभलयों: कोलकाता, चंडीगढ़, चेन्नइ, मुम्बइ तथा िाखा कायाभलयों : ऄहमदाबाद, बेंगलरुु , भोपाल, भुबनेश्वर,
कोयम्बटूर, देहरादनू , फरीदाबाद, गाजज़याबाद, गुिाहाटी, हदै राबाद, जयपुर, जम्मु, जमिेदपरु , लखनउ, नागपरु , परिान,ू
पटना, पुण,े रायपुर, राजकोट, कोजि, जििाखापटनम म ें जबक्री हते ु ईप्लब्ध ह।ैं भारतीय मानकों म ें संिोधनों को
http://www.standardsbis.in पर अनलाइन खरीदा/ डाईनलोड दकया जा सकता ह।ै
ज.े राय चौधरी, िैज्ञाजनक जी एिं ईपमहाजनदेिक (मानकीकरण – पी एिं एम)
[जिज्ञापन-III/4/ऄसा./112/2021-22]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 4th June, 2021
Ref. HQ-PUB014/1/2020-PUB-BIS (170)—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments to Indian standards,
particulars of which are given in schedule hereto annexed have been established.
SCHEDULE
Sl No., Year & Title of the Indian Standard No. and Month/Year Date of Date till which the
No. of the Amendment Establishment standard without
of the the amendment as
Amendment mentioned in
column 3 shall
remain in force
(1) (2) (3) (4) (5)
1 IS 3431 : 1982 21 May 2021 20 Nov 2021
Amendment No. 3
Specification for Steel for the Manufacture of Volute,
Helical and Laminated Springs for Automotive May 2021
Suspension
(Second Revision)
2 IS 3976 : 2018 21 May 2021 20 Feb 2022
Amendment No. 1
Safety Rubber Canvas Boots for Miners ─
Specification May 2021
(Sixth Revision)[भाग III—खण् ड 4] भारत का राजपत्र : ऄसाधारण 3
3 IS 4199 : 2001 21 May 2021 20 Aug 2021
Amendment No. 1
Toilet Soap, Liquid ─ Specification
(Third Revision) May 2021
4 IS 4398 : 1994 21 May 2021 20 Aug 2021
Amendment No. 3
Carbon Chromium Steel for the Manufacture of
Balls, Rollers and Bearing Races May 2021
(Second Revision)
Copies of these amendments to standards are available for sale with Bureau of Indian Standards, Manak Bhavan, 9
Bahadur Shah Zafar Marg, New Delhi – 110 002; Regional Offices: Kolkata, Chandigarh, Chennai, Mumbai and
Branch Offices: Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore, Dehradun, Faridabad, Ghaziabad,
Guwahati, Hyderabad, Jaipur, Jammu, Jamshedpur, Lucknow, Nagpur, Parwanoo, Patna, Pune, Raipur, Rajkot, Kochi,
Vishakhapatanam. Online purchase/downloading of amendments to Indian Standards can be made at
http://www.standardsbis.in.
J. ROY CHOWDHURY, Scientist G & DDG (Standardization − P & M)
[ADVT.-III/4/Exty./112/2021-22]
ऄजधसचू ना
नइ ददल्ली, 4 जून, 2021
सदं भ:भ HQ-PUB014/2/2020-PUB-BIS (171).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के ईपजनयम (1)
के ऄनुसरण में भारतीय मानक ब्यूरो एतदद्वारा ऄजधसूजचत करता ह ैआसमें संलग्न ऄनूसूची में ददये गय ेमानकों में संिोधन दकये गय ेहैं|
ऄनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, िर् भतथा सिं ोधनों की सख्ं या सिं ोधनों की प्रजतस्ट्थापन जतजथ जब तक मानक
स.ं एिं जतजथ जतजथ तीसरे स्ट्तंभ म ेंआंजगत
िीर्भक
सिं ोधन के जबना भी
लाग ूरहगे ा
(1) (2) (3) (4) (5)
1 अइ एस 2026 (भाग 2) : 2010 संिोधन संख्या 2 3 जून 2021 2 जसतम्बर 2021
पािर रांसफामभर जून 2021
भाग 2 तापमान-िृजि
(पहला पुनरीक्षण)
2 अइ एस 7285 (भाग 1) : 2018 संिोधन संख्या 2 3 जून 2021 2 जून 2023
पुनः भरे जाने योग्य सीिनरजहत आस्ट्पात गैस जून 2021
जसस्प्लडर ─ जिजिजष्ट
भाग 1 सामान्यकृत आस्ट्पात जसस्प्लडर
(चौथा पुनरीक्षण)
3 अइ एस 7285 (भाग 2) : 2017 संिोधन संख्या 1 3 जून 2021 2 जून 2023
पुनः भरे जाने योग्य सीिनरजहत आस्ट्पात गैस
जून 2021
जसस्प्लडर ─ जिजिजष्ट
भाग 2 1100 Mpa (112 Kgf/Mm2) से कम
तनन सामर्थयभ िाले िजमत एिं टैम्पर आस्ट्पात
जसस्प्लडर
(चौथा पुनरीक्षण)
4 अइ एस 15490 : 2017 संिोधन संख्या 1 3 जून 2021 2 जून 20234 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
स्ट्िचाल िाहनों के जलए ईंधन के रूप में संपीजडत जून 2021
प्राकृजतक गैस के अन-बोडभ भंडारण के जलए
सीिनरजहत आस्ट्पात जसस्प्लडर ─ जिजिजष्ट
(पहला पुनरीक्षण)
5 अइ एस 16088 : 2012 संिोधन संख्या 1 3 जून 2021 2 जून 2022
स्ट्िचाजलत स्प्स्ट्प्रकलर ऄजग्निमन तंत्र के जलए
जून 2021
क्लोरीनकृत पालीजिनायल क्लोराआड
(सीपीिीसी) पाआप ─ जिजिजष्ट
आन मानकों में संिोधनों की प्रजतयााँ भारतीय मानक ब्यूरो, मानक भिन, 9 बहादरु िाह ज़फर माग,भ नइ ददल्ली 110 002, क्षेत्रीय
कायाभलयों: कोलकाता, चंडीगढ़, चेन्नइ, मुम्बइ तथा िाखा कायाभलयों : ऄहमदाबाद, बेंगलुरु, भोपाल, भुबनेश्वर, कोयम्बटूर, दहे रादनू ,
फरीदाबाद, गाजज़याबाद, गुिाहाटी, हदै राबाद, जयपुर, जम्मु, जमिेदपुर, लखनउ, नागपुर, परिानू, पटना, पुणे, रायपुर, राजकोट,
कोजि, जििाखापटनम में जबक्री हते ु ईप्लब्ध ह.ैं भारतीय मानकों में संिोधनों को http://www.standardsbis.in पर अनलाइन
खरीदा/ डाईनलोड दकया जा सकता ह|ै
ज.े राय चौधरी, िैज्ञाजनक जी एिं ईपमहाजनदेिक (मानकीकरण – पी एिं एम)
[जिज्ञापन-III/4/ऄसा./112/2021-22]
NOTIFICATION
New Delhi, the 4th June, 2021
Ref: HQ-PUB014/2/2020-PUB-BIS (171).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments to Indian standards,
particulars of which are given in schedule hereto annexed have been established.
SCHEDULE
Sl No., Year & Title of the Indian Standard No. and Date of Date till which the
No. Month/Year of the Establishment standard without
Amendment of the the amendment as
Amendment mentioned in
column 3 shall
remain in force
(1) (2) (3) (4) (5)
1 IS 2026 (Part 2) : 2010 3 June 2021 02 Sept 2021
Amendment No. 1
Power Transformers
Part 2 Temperature-Rise June 2021
(First Revision)
2 IS 7285 (Part 1) : 2018 Amendment No. 2 3 June 2021 02 June 2023
Refillable Seamless Steel Gas Cylinders ─
June 2021
Specification
Part 1 Normalized Steel Cylinders
(Fourth Revision)
3 IS 7285 (Part 2) : 2017 Amendment No. 1 3 June 2021 02 June 2023
Refillable Seamless Steel Cylinders ─ June 2021
Specification
Part 2 Quenched and Tempered Steel
Cylinders with Tensile Strength Less than
1100 MPA (112 kgf/mm2)
(Fourth Revision)
4 IS 15490 : 2017 Amendment No. 1 3 June 2021 02 June 2023
Seamless Steel Cylinders for on-Board
June 2021
Storage of Compressed Natural Gas as a Fuel
for Automotive Vehicles ─ Specification
(First Revision)
5 IS 16088 : 2012 3 June 2021 02 June 2022[भाग III—खण् ड 4] भारत का राजपत्र : ऄसाधारण 5
Chlorinated Polyvinyl Chloride (CPVC) Pipes Amendment No. 1
for Automatic Sprinkler Fire Extinguishing
June 2021
System ─ Specification
Copies of these amendments to standards are available for sale with Bureau of Indian Standards, Manak Bhavan, 9
Bahadur Shah Zafar Marg, New Delhi – 110 002; Regional Offices: Kolkata, Chandigarh, Chennai, Mumbai and
Branch Offices: Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore, Dehradun, Faridabad, Ghaziabad,
Guwahati, Hyderabad, Jaipur, Jammu, Jamshedpur, Lucknow, Nagpur, Parwanoo, Patna, Pune, Raipur, Rajkot, Kochi,
Vishakhapatanam. Online purchase/downloading of amendments to Indian Standards can be made at
http://www.standardsbis.in.
J. ROY CHOWDHURY, Scientist G & DDG (Standardization − P & M)
[ADVT.-III/4/Exty./112/2021-22]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.