This gazette notification from the Bureau of Indian Standards (BIS) announces the establishment of a new Indian Standard (IS) 4296 (Part 2): 2024 and the withdrawal of the previous IS 4296 (Part 2): 2015.
It also announces the withdrawal of ISO 8020: 2002.
Key Changes
IS 4296 (Part 2): 2024, concerning tools for pressing — punches with cylindrical head and straight or reduced shank, has been established on June 25, 2024.
IS 4296 (Part 2): 2015 will be withdrawn on December 25, 2024.
ISO 8020: 2002 will be withdrawn on December 25, 2024.
Impact Analysis
Impact on Manufacturers
Existing stock conforming to IS 4296 (Part 2): 2015 may need to be phased out by December 25, 2024.
Impact on Consumers
Products conforming to the new standard should be more reliable and durable.
Impact on Importers
They may face challenges in importing products that do not meet the new standard after December 25, 2024.
Suggested Action Items
The BIS should provide support and resources to manufacturers for smooth transition.
Key Entities Referenced
Bureau of Indian Standards (BIS): The issuing authority of the notification, responsible for setting and enforcing Indian standards.
IS 4296 (Part 2): 2024: The newly established Indian Standard for tools for pressing — punches with cylindrical head and straight or reduced shank.
IS 4296 (Part 2): 2015: The previous Indian Standard for tools for pressing — punches with cylindrical head and straight or reduced shank, to be withdrawn on December 25, 2024.
ISO 8020: 2002: An international standard to be withdrawn on December 25, 2024.
Bureau of Indian Standards Rules, 2018: The rules under which the BIS operates and issues notifications.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-17072024-255494
xxxGIDHxxx
CG-DL-E-17072024-255494
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 520] नई दिल्ली, मगं लिार, िुलाई 16, 2024/आर्ाढ 25, 1946
No. 520] NEW DELHI, TUESDAY, JULY 16, 2024/ASHADHA 25, 1946
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल ेजिभाग)
अजधसचू ना
नई दिल्ली, 28 िून, 2024
सिं भ:भ HQ-PUB012/4/2020-PUB-BIS (936)—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के जििरण
इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ में दिये गये ह,ैं तीसरे स्ट्तभं में इंजगत जतजि को स्ट्िाजपत हो गये ह|ैं चौिे स्ट्तंभ में दिय े
गय े मानकों के जििरण, यदि कोई हो तो ि े भी साि-साि लाग ू रहगें े िब तक ि े पााँचि ें स्ट्तंभ में इंजगत जतजि को िापस जलए
िाने ह|ैं
अनसु चू ी
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्िापन भारतीय मानकों, यदि िापस जलए िापस होने
सं. जतजि की जतजि
िर्भ तिा िीर्भक िाने ह,ैं की संख्या, िर् भ तिा
िीर्भक
(1) (2) (3) (4) (5)
1 आई एस 4296 (भाग 2) : 2024 25 िून 2024 आई एस 4296 (भाग 2) : 2015 25 दिसम्बर
िाबन के औज़ार — पंच आई एस ओ 8020 : 2002 2024
भाग 2 बले नाकार िीर्भ तिा सीधे या िाबन के औिार
4281 GI/2024 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
लघुत्तर िैंक िाले गोल पंच भाग 2 बले नाकार िीर्भ तिा सीधे
(िसू रा पनु रीक्षण) या लघतुं र िैंक िाल ेगोल पंच
(पहला पुनरीक्षण)
पी. रािेि, िैज्ञाजनक िी एिं उप महाजनिेिक (आई टी एस, पी आर टी एिं टी एन एम)
[जिज्ञापन-III/4/असा./289/2024-25]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 28th June, 2024
Ref: HQ-PUB012/4/2020-PUB-BIS (936)—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
which are given in the second column of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
Sl. Date of Date of
No., Year & Title of the Indian No. , Year & Title of the
Establishment Withdrawal
No. Standards Established Indian Standards to be
Withdrawn, if any
(1) (2) (3) (4) (5)
IS 4296 (Part 2) : 2015 25 December
IS 4296 (Part 2) : 2024
ISO 8020 : 2002 2024
Tools for Pressing — Punches
Tools for Pressing
1 Part 2 Punches with Cylindrical 25 June 2024
Part 2 Punches with
Head and Straight or Reduced
Cylindrical Head and Straight
Shank
or Reduced Shank
(Second Revision)
(First Revision)
P. RAJESH, Scientist G & DDG (ITS, PRT & TNM)
[ADVT.-III/4/Exty./289/2024-25]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.