Home› India› Bureau of Indian Standards› In pursuance of Sub rule 1 of Rule 15 of the Bureau of India...
Date: 10-May-2024 Category: Extra Ordinary State: Union Government Country: India

In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards

Issued by Bureau of Indian Standards · Not Applicable

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

What it means

  • The gazette notification issued by the Bureau of Indian Standards (BIS) announces the establishment of a new Indian Standard IS 617: 2024 concerning aluminium and aluminium alloy ingots for remelting and castings for general engineering purposes. It also specifies the withdrawal date for the superseded standard.

Key Changes

  • Indian Standard IS 617: 2024, concerning Aluminium and Aluminium Alloys Cast Ingots for Remelting and Castings for General Engineering Purposes – Specification (Fourth Revision), has been established on May 10, 2024.
  • The previous standard, IS 617: 1994 (Third Revision) with the same title, will be withdrawn on November 10, 2024. Until then, both standards will be in force concurrently.

Impact Analysis

Manufacturers of Aluminium and Aluminium Alloy Products

  • Action Items: Review and update manufacturing processes, quality control procedures, and product specifications to comply with the requirements of IS 617: 2024. Ensure that products manufactured after November 10, 2024, fully conform to the new standard.

Consumers and End-Users

  • Action Items: Be aware of the new standard and request compliance from suppliers. Update internal standards and procurement processes to reference IS 617: 2024 when specifying aluminium and aluminium alloy products.

Bureau of Indian Standards (BIS)

  • Action Items: Conduct awareness programs and training sessions for manufacturers. Update certification processes to reflect the requirements of IS 617: 2024. Monitor the market to ensure compliance and address any non-conformities.

Key Entities Referenced

Bureau of Indian Standards (BIS): The national standards body of India responsible for formulating and promoting standards. IS 617: 2024: Indian Standard for Aluminium and Aluminium Alloys Cast Ingots for Remelting and Castings for General Engineering Purposes – Specification (Fourth Revision). IS 617: 1994: Indian Standard for Aluminium and Aluminium Alloys Cast Ingots and Castings for General Engineering Purposes – Specification (Third Revision), which is being superseded. Bureau of Indian Standards Rules, 2018: The regulatory framework under which BIS operates and establishes standards.
Official Source Record View Original Source →
See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99 सी.जी.-डी.एल.-अ.-11052024-254169 xxxGIDHxxx CG-DL-E-11052024-254169 xxxGIDExxx असाधारण EXTRAORDINARY भाग III—खण् ड 4 PART III—Section 4 प्राजधकार स ेप्रकाजित PUBLISHED BY AUTHORITY स.ं 333] नई दिल्ली, िुक्रिार, मई 10, 2024/ििै ाख 20, 1946 No. 333] NEW DELHI, FRIDAY, MAY 10, 2024/VAISAKHA 20, 1946 भारतीय मानक ब्य रू ो (उपभोक् ता मामले जिभाग) अजधसचू ना नई दिल्ली, 10 मई, 2024 सिं भ:भ HQ-PUB012/1/2020-PUB-BIS (872).- भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के उपजनयम (1) के अनुसरण में भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ैकी जिन भारतीय मानकों के जििरण इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ में दिये गये ह,ैं तीसरे स्ट्तंभ में इंजगत जतजि को स्ट्िाजपत हो गय ेहैं| चौिे स्ट्तंभ में दिये गये मानकों के जििरण, यदि कोई हो तो िे भी साि-साि लागू रहेंगे िब तक िे पााँचिें स्ट्तंभ में इंजगत जतजि को िापस जलए िाने हैं| अनसु चू ी क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भतिा िीर्कभ प्रजतस्ट्िापन भारतीय मानकों, यदि िापस जलए िान ेह,ैं की िापस होन ेकी स.ं जतजि जतजि सख्ं या, िर् भतिा िीर्कभ (1) (2) (3) (4) (5) 1 आई एस 617 : 2024 10 मई आई एस 617 : 1994 10 निम्बर सामान्य इंिीजनयररंग प्रयोिनों के जलए रीमेलल्टंग और 2024 ढलिां एल्युमीजनयम और उसकी जमश्रधातुएाँ 2024 कालस्ट्टंग के जलए एल्यूमीजनयम और एल्यूमीजनयम — सामान्य इंिीजनयरी प्रयोिनों के जलए इंगट जमश्रधातु जसजल्लयां — जिजिजि और ढलाइयााँ — जिजिजि (चौिा पुनरीक्षण) (तीसरा पुनरीक्षण) पी रािेि, िैज्ञाजनक िी एिं उप महाजनिेिक (आई टी एस, पी आर टी एिं टी एन एम) [जिज्ञापन-III/4/असा./102/2024-25] 2996 GI/2024 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 10th May, 2024 Ref: HQ-PUB012/1/2020-PUB-BIS (872) In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column. SCHEDULE Sl No., Year & Title of the Indian Date of No., Year & Title of the Indian Date of No. Standards Established Establishment Standards to be Withdrawn, if Withdrawal any (1) (2) (3) (4) (5) 1 IS 617 : 2024 10 May 2024 IS 617 : 1994 10 Aluminium and Aluminium Alloys Cast Aluminium and its Alloys — November Ingots for Remelting and Castings for Ingots and Castings for General 2024 General Engineering Purposes — Engineering Purposes — Specification Specification (Fourth Revision) (Third Revision) P. RAJESH, Scientist G & DDG (ITS, PRT & TNM) [ADVT.-III/4/Exty./102/2024-25] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research

Related Documents from Bureau of Indian Standards