Home India Bureau of Indian Standards In pursuance of Sub rule (1) of Rule (15) of the Bureau of I...
Date: 16-Jan-2025 Category: Extra Ordinary State: Union Government Country: India

In pursuance of Sub rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards

Issued by Bureau of Indian Standards · Not Applicable

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

What it means

  • This gazette notification from the Bureau of Indian Standards (BIS) announces the establishment of new Indian Standards and the concurrent validity of older standards until their withdrawal.
  • The notification specifies that certain older Indian Standards will be replaced by newer versions, while the older versions will remain valid until June 30, 2025.

Key Changes

  • Eight new Indian Standards have been established on December 31, 2024.
  • These new standards replace older versions of the same standards.
  • The older versions of the standards will remain in force concurrently until June 30, 2025.
  • The standards primarily relate to industrial process measurement and control systems, and specifications for various types of winding wires.
  • The standards being replaced are mostly revisions of existing standards, with some going through multiple revisions.
  • The new standards are aligned with international standards from the International Electrotechnical Commission (IEC).

Impact Analysis

Manufacturers of Winding Wires

  • Manufacturers should review the specific changes in each standard to ensure compliance.

Manufacturers of Industrial Process Measurement and Control Systems

  • They need to integrate the updated standards into their design and testing procedures.

Testing and Certification Bodies

  • They should communicate the changes to their clients and stakeholders.

Consumers

  • They may see a transition in products as manufacturers adopt the new standards.

Government Agencies

  • They should conduct awareness campaigns to educate stakeholders about the changes.

Key Entities Referenced

Bureau of Indian Standards (BIS): The national standards body of India responsible for formulating and promoting Indian Standards. Indian Standards (IS): The standards formulated by the Bureau of Indian Standards. International Electrotechnical Commission (IEC): An international standards organization that prepares and publishes international standards for all electrical, electronic and related technologies. IS 8493: Indian Standard related to Analogue DC Voltage Signals for Industrial Process Measurement and Control Systems. IS 13730: Indian Standard related to Specification for Particular Types of Winding Wires. IS 13778: Indian Standard related to Winding Wires - Methods of Test.
Official Source Record View Original Source →
See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99 सी.जी.-डी.xएxलx.G-अID.-H20xx0x12 025-260336 CG-DLxx-xEG-I2D0E0x1x2x0 25-260336 असाधारण EXTRAORDINARY भाग III—खण् ड 4 PART III—Section 4 प्राजधकार स ेप्रकाजित PUBLISHED BY AUTHORITY स.ं 45] नई दिल्ली, बहृ स्ट्प जतिार, िनिरी 16, 2025/पौर् 26, 1946 No. 45] NEW DELHI, THURSDAY, JANUARY 16, 2025/PAUSHA 26, 1946 भारतीय मानक ब्यरू ो (उपभोक्ता मामल े जिभाग) अजधसचू ना नई दिल्ली, 7 िनिरी, 2025 संिभभ: HQ-PUB013/1/2020-PUB-BIS (1132).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के उपजनयम (1) के अनुसरण में भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ैकी जिन भारतीय मानकों के जििरण इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ में दिये गये हैं, तीसरे स्ट्तंभ में इंजगत जतजि को स्ट्िाजपत हो गये ह|ैं चौिे स्ट्तंभ में दिये गये मानकों के जििरण, यदि कोई हो तो िे भी साि-साि लागू रहगें े िब तक िे पााँचिें स्ट्तंभ में इंजगत जतजि को िापस जलए िाने ह|ैं अनसु चू ी क्रम स्ट्िाजपत भारतीय मानकों की प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस िापस होन ेकी स.ं सख्ं या, िर् भतिा िीर्कभ जलए िान ेह,ैं की सख्ं या, िर् भ जतजि तिा िीर्कभ (1) (2) (3) (4) (5) 1 31 दिसम्बर 2024 30 िून 2025 आई एस 8493 : 2024 आई एस 8493 – 1977 आई ई सी 60381-2 : 1978 औद्योजगक प्रदक्रया माप और 448 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] क्रम स्ट्िाजपत भारतीय मानकों की प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस िापस होन ेकी स.ं सख्ं या, िर् भतिा िीर्कभ जलए िान ेह,ैं की सख्ं या, िर् भ जतजि तिा िीर्कभ (1) (2) (3) (4) (5) जनयंत्रण प्रणाजलयों के जलए औद्योजगक प्रदक्रया माप और एनालॉग डी.सी. िोल्टेि जनयंत्रण प्रणाजलयों के जलए जसग्नल एनालॉग डीसी िोल्टेि जसग्नल (पहला पनु रीक्षण) 2 31 दिसम्बर 2024 30 िून 2025 आई एस 13730 (भाग आई एस 13730 (भाग 0/अनुभाग 4) : 2024 0/अनुभाग 4) : 2018 आई ई सी 60317-0-4 : आई ई सी 60317-0-4 : 2015 2020 जििेर् प्रकार के कुंडलण तारों की जििेर् प्रकार के कुंडलण तारों जिजिजियााँ की जिजिजि भाग 0 सामान्य भाग 0 सामान्य अपेक्षाए ं अपेक्षाएाँ अनुभाग 4 कााँच-ततं ु की क्षत अनुभाग 4 कााँच-ततं ु की क्षत रेजिन अििा िार्नभि संसेजचत, रेजिन अििा िार्नभि नंगी अििा अनेमजलत संचेजचत, नगं ी अििा आयताकार कापर की तार अनेमजलत आयताकार कॉपर (िसू रा पनु रीक्षण) की तार (तीसरा पुनरीक्षण) 3 31 दिसम्बर 2024 30 िून 2025 आई एस 13730 (भाग आई एस 13730 (भाग 0/अनुभाग 6) : 2024 0/अनुभाग 6) : 2012 आई ई सी 60317-0-6 : आई ई सी 60317-0-6 : 2007 2020 जििेर् प्रकार की कुंडलण तारों जििेर् प्रकार के कुंडलण तारों की जिजिजियााँ की जिजिजि भाग 0 सामान्य भाग 0 सामान्य अपेक्षाएाँ अपेक्षाएाँ अनुभाग 6 कााँच तन्त ु की क्षत अनुभाग 6 कााँच-ततं ु की क्षत रेजिन अििा िार्नभि संसेजचत, रेजिन अििा िार्नभि नंगी अििा अनेमजलत गोल संचेजचत, नगं ी अििा कॉपर की तार अनेमजलत गोल कॉपर की तार (पहला पनु रीक्षण) 4 31 दिसम्बर 2024 30 िून 2025 आई एस 13730 (भाग 2) : आई एस 13730 (भाग 2) : 2024 2018 आई ई सी 60317-2 : 2019 आई ई सी 60317-2 : 2012 + ए एम डी 1 : 2024 सी जििेर् प्रकार के कुंडलण तारों की एस िी जिजिजियााँ जििेर् प्रकार के कुंडलण तारों भाग 2 टााँका लगान े योग्य की जिजिजि भाग 2 पोलीयूरीिेन अनेमजलत गोल सोल्डरेबल पॉलीयुरेिने[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3 क्रम स्ट्िाजपत भारतीय मानकों की प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस िापस होन ेकी स.ं सख्ं या, िर् भतिा िीर्कभ जलए िान ेह,ैं की सख्ं या, िर् भ जतजि तिा िीर्कभ (1) (2) (3) (4) (5) एनामेल्ड गोल तांबे के तार, कॉपर की तारें, िगभ 130, क्लास 130, एक बंधन परत बंधनीय पत भसजहत के साि (िसू रा पनु रीक्षण) (तीसरा पनु रीक्षण) 5 31 दिसम्बर 2024 30 िून 2025 आई एस 13730 (भाग 17) : आई एस 13730 (भाग 17) : 2024 2014 आई ई सी 60317-17 : आई ई सी 60317-17 : 2010 2020 जििेर् प्रकार की कुंडलण तारों जििेर् प्रकार के कुंडलण तारों की जिजिजियााँ की जिजिजि भाग 17 पोलीजिन्याल एसेटल भाग 17 पॉलीजिनाइल इनैमजलत आयताकार तााँबा तारें, एसीटल एनामेल्ड आयताकार िगभ 105 तांबे के तारें, क्लास 105 (पहला पुनरीक्षण) (िसू रा पनु रीक्षण) 6 31 दिसम्बर 2024 30 िून 2025 आई एस 13730 (भाग 25) : आई एस 13730 (भाग 25) : 2024 2015 आई ई सी 60317-25 : आई ई सी 60317-25 : 2010 2020 जििेर् प्रकार की कुंडलण तारों जििेर् प्रकार के कुंडलण तारों की जिजिजियााँ की जिजिजि भाग 25 भाग 25 पोलीएमाईड-इमाईड पॉजलएमाइड-इमाइड इनैमजलत सजहत पोलीएस्ट्टर या एनामेल्ड गोल एल्युमीजनयम पोलीएस्ट्टेिईमाईड स ेलेजपत तार से लेजपत पॉजलएस्ट्टर या गोलाकार एल्युजमजनयम तार, िगभ पॉजलएस्ट्टरइमाइड, क्लास 200 200 (पहला पुनरीक्षण) 7 31 दिसम्बर 2024 30 िून 2025 आई एस 13778 (भाग 1) : आई एस 13778 (भाग 1) : 2024 2011 आई ई सी 60851-1 : 2021 आई ई सी 60851-1 : 1996 कुंडलन तारें — परीक्षण कुंडलन तारें — परीक्षण पद्धजतयााँ पद्धजतयााँ भाग 1 सामान्य भाग 1 सामान्य (िसू रा पनु रीक्षण) (पहला पुनरीक्षण)4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] क्रम स्ट्िाजपत भारतीय मानकों की प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस िापस होन ेकी स.ं सख्ं या, िर् भतिा िीर्कभ जलए िान ेह,ैं की सख्ं या, िर् भ जतजि तिा िीर्कभ (1) (2) (3) (4) (5) 8 31 दिसम्बर 2024 30 िून 2025 आई एस 13778 (भाग 3) : आई एस 13778 (भाग 3) : 2024 2012 आई ई सी 60851-3 : 2023 आई ई सी 60851-3 : 2009 कुंडलन तारें — परीक्षण िेिन — परीक्षण पद्धजतयााँ पद्धजतयााँ भाग 3 यांजत्रक गुण-धमभ भाग 3 यांजत्रक गुण-धमभ (पहला पुनरीक्षण) (िसू रा पनु रीक्षण) जचत्रा गप्ु ता, िैज्ञाजनक िी एिं उप महाजनिेिक (हॉलमार्किंग) [जिज्ञापन-III/4/असा./903/2024-25] BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 7th January, 2025 Ref: HQ-PUB013/1/2020-PUB-BIS (1132).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column. SCHEDULE Sl No., Year & Title of the Indian Date of No. , Year & Title of the Date of No. Standards Established Establishment Indian Standards to be withdrawal withdrawn, if any (1) (2) (3) (4) (5) 31 December 2024 30 June 2025 1 IS 8493 : 2024 IS 8493 – 1977 IEC 60381-2 : 1978 Analogue DC Voltage Signals Analogue d.c. Voltage Signals for Industrial Process for Industrial Process Measurement and Control Measurement and Control Systems Systems (First Revision) 31 December 2024 30 June 2025 2 IS 13730 (Part 0/Sec 4) : 2024 IS 13730 (Part 0/Sec 4) : 2018 IEC 60317-0-4 : 2020 IEC 60317-0-4 : 2015 Specification for Particular Specification for Particular Types of Winding Wires Types of Winding Wires Part 0 General Requirements Part 0 General Requirements Section 4 Glass-Fibre Wound Section 4 Glass-fibre wound Resin or Varnish Impregnated, resin or varnish impregnated,[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5 Sl No., Year & Title of the Indian Date of No. , Year & Title of the Date of No. Standards Established Establishment Indian Standards to be withdrawal withdrawn, if any (1) (2) (3) (4) (5) Bare or Enamelled Rectangular bare or enamelled rectangular Copper Wire copper wire (Third Revision) (Second Revision) 31 December 2024 30 June 2025 3 IS 13730 (Part 0/Sec 6) : 2024 IS 13730 (Part 0/Sec 6) : 2012 IEC 60317-0-6 : 2020 IEC 60317-0-6 : 2007 Specification for Particular Specifications for Particular Types of Winding Wires Types of Winding Wires Part 0 General Requirements Part 0 General Requirements Section 6 Glass-Fibre Wound Section 6 Glass-Fibre Wound Resin or Varnish Impregnated, Resin or Varnish Impregnated, Bare or Enamelled Round Bare or Enamelled Round Copper Wire Copper Wire (First Revision) 31 December 2024 30 June 2025 4 IS 13730 (Part 2) : 2024 IS 13730 (Part 2) : 2018 IEC 60317-2 : 2019 IEC 60317-2 : 2012 + AMD 1 : 2024 CSV Specification for Particular Specification for Particular Types of Winding Wires Types of Winding Wires Part 2 Solderable Polyurethane Part 2 Solderable Polyurethane Enamelled Round Copper Enamelled Round Copper Wire Wire, Class 130, with a Class 130, with a Bonding Layer Bonding Layer (Third Revision) (Second Revision) 31 December 2024 30 June 2025 5 IS 13730 (Part 17) : 2024 IS 13730 (Part 17) : 2014 IEC 60317-17 : 2020 IEC 60317-17 : 2010 Specification for Particular Specifications for Particular Types of Winding Wires Types of Winding Wires Part 17 Polyvinyl Acetal Part 17 Polyvinyl acetal Enamelled Rectangular Copper enamelled rectangular copper Wire, Class 105 wire, class 105 (Second Revision) (First Revision) 31 December 2024 30 June 2025 6 IS 13730 (Part 25) : 2024 IS 13730 (Part 25) : 2015 IEC 60317-25 : 2020 IEC 60317-25 : 2010 Specification for Particular Specifications for Particular Types of Winding Wires Types of Winding Wires Part 25 Polyester or Part 25 Polyester or Polyesterimide Overcoated with Polyesterimide Overcoated Polyamide-Imide Enamelled with Polyamide-Imide Round Aluminium Wire, Class Enamelled Round Aluminium 200 Wire, Class 200 (First Revision) 31 December 2024 30 June 2025 7 IS 13778 (Part 1) : 2024 IS 13778 (Part 1) : 2011 IEC 60851-1 : 2021 IEC 60851-1 : 1996 Winding Wires — Methods of Winding Wires — Test Test Methods6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] Sl No., Year & Title of the Indian Date of No. , Year & Title of the Date of No. Standards Established Establishment Indian Standards to be withdrawal withdrawn, if any (1) (2) (3) (4) (5) Part 1 General Part 1 General (Second Revision) (First Revision) 31 December 2024 30 June 2025 8 IS 13778 (Part 3) : 2024 IS 13778 (Part 3) : 2012 IEC 60851-3 : 2023 IEC 60851-3 : 2009 Winding Wires — Methods of Winding Wires — Test Test Methods Part 3 Mechanical Properties Part 3 Mechanical Properties (Second Revision) (First Revision) CHITRA GUPTA, Scientist G & DDG (Hallmarking) [ADVT.-III/4/Exty./903/2024-25] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research