Executive Summary:
This notification from the Bureau of Indian Standards announces the establishment of several Indian Standards, effective December 19, 2019. It lists standards across various fields, including woven fabrics, information technology, photovoltaic modules, machine tools, and cosmetic ingredients. The listed Indian Standards which are given in the fourth column shall also remain in force concurrently till they are cancelled on the date indicated against them in the fifth column.
Key Points / Main Content:
* **Establishment of Indian Standards:**
* A series of Indian Standards have been established on December 19, 2019.
* These standards cover a diverse range of subjects.
* **List of Standards Established:**
* ISISO 13015:2013: Woven Fabrics - Distortion - Determination of Skew and Bow
* ISISOIEC 14496-21:2006: Information Technology - Coding of Audio-Visual Objects - Part 21: MPEG-J Graphics Framework Extensions (GFX)
* ISISOIEC 14496-28:2012: Information Technology - Coding of Audio-Visual Objects - Part 28: Composite Front Representation
* ISISOIEC 14496-29:2015: Information Technology - Coding of Audio-Visual Objects - Part 29: Web Video Coding
* IS 16792 Part 1 Sec 6:2019/IEC 62788-1-6:2017: Measurement Procedures for Materials used in Photovoltaic Modules - Part 1: Encapsulants - Section 6: Test Methods for Determining the Degree of Cure in ethylene-Vinyl Acetate
* IS 17000:2019: Sustainable Development of Habitats - Indicators
* IS 17246:2019/ISO 3190:1975: Test Conditions for Turret and Single Spindle Co-ordinate Drilling Machines with Vertical Spindle - Testing of the Accuracy
* IS 17247 Part 1:2019/ISO 3686-1:2000: Test Conditions for High Accuracy Turret and Single Spindle Coordinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle - Testing of the Accuracy - Part 1: Single Column Type Machines
* IS 17247 Part 2:2019/ISO 3686-2:2000: Test Conditions for High Accuracy Turret and Single Spindle Coordinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle - Testing of the Accuracy - Part 2: Portal Type Machines with Moving Table
* IS 17248:2019/ISO 8956:1986: Acceptance Conditions for Copying Attachments, Integral or Otherwise, for Lathes - Testing of the Accuracy
* IS 17249 Part 1:2019/ISO 11090-1:2014: Test Conditions for Die Sinking Electro-Discharge Machine (Die Sinking EDM) - Testing of the Accuracy - Part 1: Single-Column Machines - Cross-Slide Table Type and Fixed-Table Type
* IS 17250:2019/ISO 14137:2015: Test Conditions for Wire Electrical Discharge Machines (Wire EDM) - Testing of the Accuracy
* IS 17251 Part 1:2019/ISO 14955-1:2017: Machine Tools - Environmental Evaluation of Machine Tools - Part 1: Design Methodology for Energy-Efficient Machine Tools
* IS 17251 Part 2:2019/ISO 14955-2:2018: Machine Tools - Environmental Evaluation of Machine Tools - Part 2: Methods for Measuring Energy Supplied to Machine Tools and Machine Tool Components
* IS 17252 Part 1:2019/ISO 15616-1:2003: Acceptance Tests for CO2 Laser Beam Machines for High Quality Welding and Cutting - Part 1: General Principles, Acceptance Conditions
* IS 17252 Part 2:2019/ISO 15616-2:2003: Acceptance Tests for CO2 Laser Beam Machines for High Quality Welding and Cutting - Part 2: Measurement of Static and Dynamic Accuracy
* IS 17253 Part 1:2019/ISO 16090-1:2017: Machine Tools Safety - Machining Centres, Milling Machines, Transfer Machines - Part 1: Safety Requirements
* IS 17254:2019/ISO 16093:2017: Machine Tools Safety - Sawing Machines for Cold Metal
* IS 17255:2019/ISOTR 16907:2015: Machine Tools - Numerical Compensation of Geometric Errors
* IS 17256 Part 1:2019/ISOTR 17243-1:2014: Machine Tool Spindles - Evaluation of Machine Tool Spindle Vibrations by Measurements on Spindle Housing - Part 1: Spindles with Rolling Element Bearings and Integral Drives Operating at Speeds Between 600 min-1 and 30 000 min-1
* IS 17256 Part 2:2019/ISOTR 17243-2:2017: Machine Tool Spindles - Evaluation of Spindle Vibrations by Measurements on Non-Rotating Parts - Part 2: Direct-Driven Spindles and Belt-Driven Spindles with Rolling Element Bearings Operation at Speeds Between 600 r/min and 30 000 r/min
* IS 17257:2019/ISO 26303:2012: Machine Tools - Short-Term Capability Evaluation of Machining Processes on Metal-Cutting Machine Tools
* IS 17258:2019/ISO 23125:2015: Machine Tools - Safety - Turning Machines
* IS 17270:2019: Intelligent Transport Systems (ITS) - Reverse Parking Alert System (RPAS)
* IS 17277 Part 1:2019/ISO 16092-1:2017: Machine Tools Safety - Presses - Part 1: General Safety Requirements
* IS 17316 Part 1:2019/ISO 16128-1:2016: Guidelines on Technical Definitions and Criteria for Natural and Organic Cosmetic Ingredients and Products - Part 1: Definitions for Ingredients and Products
* IS 17316 Part 2:2019: Guidelines on Technical Definitions and Criteria for Natural and Organic Cosmetic Ingredients and Products - Part 2: Criteria for Ingredients and Products
* IS/IEC 62642-1:2010: Alarm Systems - Intrusion and Hold-up Systems - Part 1: System Requirements
* IS/IEC 62642-3:2010: Alarm Systems - Intrusion and Hold-up Systems - Part 3: Control and Indicating Equipment
* IS/IECTS 62642-7:2011: Alarm Systems - Intrusion and Hold-up Systems - Part 7: Application Guidelines
* IS/IEC 62805-1:2017: Method for Measuring Photovoltaic (PV) Glass - Part 1: Measurement of Total Haze and Spectral Distribution of Haze
* IS/IEC 62805-2:2017: Method for Measuring Photovoltaic (PV) Glass - Part 2: Measurement of Transmittance and Reflectance
* IS/IEC 62820-1-1:2016: Building Intercom Systems - Part 1-1: System Requirements - General
* IS/IECTS 62916:2017: Photovoltaic Modules - Bypass Diode Electrostatic Discharge Susceptibility Testing
* IS/IEC 62941:2016: Terrestrial Photovoltaic (PV) Modules - Guidelines for Increased Confidence in PV Module Design Qualification and Type Approval
* IS/IEC 62979:2017: Photovoltaic Modules - Bypass Diode Thermal Runaway Test
Impact Analysis:
* **Manufacturers and Producers:**
* Impact: Must adhere to the new standards in their production processes.
* Action Required: Review and update manufacturing processes to comply with the relevant standards.
* **Testing and Certification Bodies:**
* Impact: Need to incorporate the new standards into their testing and certification procedures.
* Action Required: Update testing protocols and certification schemes to reflect the new standards.
* **Consumers:**
* Impact: Benefit from products and services that meet updated quality and safety benchmarks.
* Action Required: Be aware of the updated standards when purchasing products or services.
* **Bureau of Indian Standards (BIS):**
* Impact: Responsible for implementing and maintaining these standards.
* Action Required: Ensure the standards are accessible, and provide guidance on compliance.
* **Relevant Industries (e.g., machine tool, photovoltaic, cosmetics):**
* Impact: Affected by the specific standards related to their sector.
* Action Required: Industry stakeholders should familiarize themselves with the standards applicable to their operations.
Key Entities Referenced
Bureau of Indian Standards: A national standards body of India responsible for the formulation of standards.
Bureau of Indian Standards Rules, 2018: The rule under which the Bureau of Indian Standards notifies the establishment of Indian Standards.
Indian Standards: A set of standards established by the Bureau of Indian Standards.
Ministry of Consumer Affairs, Food and Public Distribution: The ministry responsible for consumer affairs, food, and public distribution in India.
Department of Consumer Affairs: A department within the Ministry of Consumer Affairs, Food and Public Distribution.
New Delhi: Location of publication of the notification, Union Territory of Delhi
Manak Bhawan, 9 Bahadur Shah Zafar Marg, New Delhi 110002: Address of the Bureau of Indian Standards headquarters.
IS/ISO/IEC standards: Various International and Indian standards related to woven fabrics, information technology, measurement procedures, sustainable development, machine tools, alarm systems, and photovoltaic modules
ररररििििजजजज(cid:4)(cid:4)(cid:4)(cid:4)(cid:5)(cid:5)(cid:5)(cid:5)ीीीी सससस..ंं..ंं डडडडीीीी....एएएएलललल....---- 33333333000000004444////99999999 REGD. NO. D. L.-33004/99
सी.जी.-डी.एलxxxxxxxx.-xxxxअGGGGIIII.DDDD-HHHH1xxxx1xxxxxxxx012020-215326
CG-DL-E-11012020-215326
xxxGIDExxx
अअअअससससााााधधधधााााररररणणणण
EXTRAORDINARY
भाग III—ख(cid:2) ड 4444
PART III—Section 4
(cid:1)(cid:1)(cid:1)(cid:1)ााााििििधधधधककककाााारररर सससस ेे ेे(cid:1)(cid:1)(cid:1)(cid:1)ककककााााििििशशशशतततत
PUBLISHED BY AUTHORITY
सससस..ंंं..ं 00008888]]]] ननननईईईई (cid:1)(cid:1)(cid:1)(cid:1)दददद(cid:3)(cid:3)(cid:3)(cid:3)ललललीीीी,,,, ममममंगंगंगंगललललववववाााारररर,,,, जजजजननननववववररररीीीी 7777,,,, 2222000022220000////पपपपौौौौषषषष 11117777,,,, 1111999944441111
No. 08] NEW DELHI, TUESDAY, JANUARY 7, 2020/ PAUSHA 17, 1941
उउउउपपपपभभभभोोोो(cid:5)(cid:5)(cid:5)(cid:5)तत तत ाााा ममममााााममममलललल ेे ेे खखखखाााा(cid:13)(cid:13)(cid:13)(cid:13) एएएएवववव ंंंंससससााााववववजज(cid:18)(cid:18)जज(cid:18)(cid:18) ििििननननकककक ििििववववततततररररणणणण मममम(cid:25)(cid:25)(cid:25)(cid:25)ंंंं ााााललललयययय
((((उउउउपपपपभभभभोोोो(cid:5)(cid:5)(cid:5)(cid:5)तत तत ाााा ममममााााममममलललल ेेेेििििववववभभभभाााागगगग))))
भभभभााााररररततततीीीीयययय ममममााााननननकककक (cid:28)(cid:28)(cid:28)(cid:28)यय यय ररररूूूू ोोोो
अअअअििििधधधधससससचचूूचचूू ननननाााा
ननननईईईई (cid:31)(cid:31)(cid:31)(cid:31)दददद!!!!लल लल ीीीी,,,, 22220000 (cid:31)(cid:31)(cid:31)(cid:31)ददददसससस""""बबबबरररर,,,, 2222000011119999
ससससददंंददंं भभभभ::(cid:18)(cid:18)::(cid:18)(cid:18) PPPPUUUUBBBB////3333////3333////2222000011119999----22220000....———— भारतीय मानक (cid:11) यरू ो िनयम 2018 के िनयम 15 के उपिनयम (1) के
अनुसरण म(cid:17) भारतीय मानक (cid:11) यरू ो एतद्(cid:18)ारा अिधसूिचत करता ह ै (cid:24)क िजन भारतीय मानक(cid:26) के िववरण नीच े
अनुसूची म(cid:17) (cid:24)दए गए ह वे ! थािपत हो गय े ह।
%%%%मममम ’’’’थथ थथ ााााििििपपपपतततत भभभभााााररररततततीीीीयययय ममममााााननननकककक ((((कककक****)))) कककक,,,, सससस&&ंं&&ंं यय यय ाााा ववववषषषष (cid:18)(cid:18)(cid:18)(cid:18)औऔऔऔरररर ’’’’थथ थथ ााााििििपपपपतततत भभभभााााररररततततीीीीयययय ममममााााननननकककक((((कककक****)))) जजजजोोोो रररर0000 हहहहोोोोनननन ेे ेे
सससस&&ंं&&ंं यय यय ाााा शशशशीीीीषषषषकक(cid:18)(cid:18)कक(cid:18)(cid:18) ििििततततििििथथथथ (cid:31)(cid:31)(cid:31)(cid:31)कककक रररर0000 हहहहोोोोनननन ेे ेेहहहह,,ैै,,ैै अअअअगगगगरररर हहहह,,ैै,,ैै कककक,,,,
कककक,,,, सससस&&ंं&&ंं यय यय ाााा ववववषषषष (cid:18)(cid:18) (cid:18)(cid:18) औऔऔऔरररर ििििततततििििथथथथ
शशशशीीीीषषषषकक(cid:18)(cid:18)कक(cid:18)(cid:18)
134 GI/2020 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
((((1111)))) ((((2222)))) ((((3333)))) ((((4444)))) ((((5555))))
1111.... आई एस/आई एस ओ 13015 : 2013 19 लागू नह- लागू
बुने &ए कपड़ े ─ िव!थापन ─ !कू और बो का (cid:24)दस*बर नह-
िनधा)रण 2019
2222.... आई एस/आई एस ओ/आई ई सी 14496-21 : 19 लागू नह- लागू
2006 (cid:24)दस*बर नह-
सुचना .ौघोिगक1 ─ 23-द5ृ य व!तु6 का 2019
को7डग
भाग 21 एमपीईजी-जे 9ा(cid:24)फ;स <ेमवक)
ए;सट(cid:17)श?स (जी एफ ए;स)
3333.... आई एस/आई एस ओ/आई ई सी 14496-28 : 19 लागू नह- लागू
2012 (cid:24)दस*बर नह-
सूचना .ौघोिगक1 ─ 23-द5ृ य व!तु6 का 2019
को7डग
भाग 28 सम9 फॉ?ट .ितिनिधBव
4444.... आई एस/आई एस ओ/आई ई सी 14496-29 : 19 लागू नह- लागू
2015 (cid:24)दस*बर नह-
सूचना .ौघोिगक1 ─ 23-द5ृ य व!तु6 का 2019
को7डग
भाग 29 वबे वीिडयो को7डग
5555.... आई एस 16792 (भाग 1/अनुभाग 6) : 19 लागू नह- लागू
2019/आई ई सी 62788-1-6 : 2017 (cid:24)दस*बर नह-
.काशवोCटीय माडCस म (cid:17) .युD पदाथE हते ु मापन 2019
पFितया ँ
भाग 1 संपुटक
अनुभाग 6 एिथलीन-िवनाइल एसीटेटी म (cid:17)
संसाधन माIा जाचँ ने क1 परीJण िविध
6666.... आई एस 17000 : 2019 19 लागू नह- लागू
िनवास !थान(cid:26) का सतत् िवकास ─ सकं ेतक (cid:24)दस*बर नह-
2019
7777.... आई एस 17246 : 2019/आई एस ओ 3190 : 19 लागू नह- लागू
1975 (cid:24)दस*बर नह-
लंबवत धुरी वाली, बुज ) और 7सगल 7!पडल 2019
सम?वय िK7लग मशीन(cid:26) के िलए परीJण क1
ि!थित ─ सटीकता का परीJण
8888.... आई एस 17247 (भाग 1) : 2019/आई एस ओ 19 लागू नह- लागू
3686-1 : 2000 (cid:24)दस*बर नह-
ऊLवाधर धुरी के साथ िनिMत ऊंचाई क1 तािलका 2019
वाली उQ सटीकता बजु ) और एकल धुरी सम?वय
िK7लग और बोRरग मशीन(cid:26) के िलए टे!ट ि!थितयां
─ सटीकता का परीJण¹भाग IIIµख(cid:2) ड 4º भारत का राजप(cid:10) : असाधारण 3
भाग 1 7सगल कालम टाइप मशीन
9999.... आई एस 17247 (भाग 2) : 2019/आई एस ओ 19 लागू नह- लागू
3686-2 : 2000 (cid:24)दस*बर नह-
ऊLवाधर धुरी के साथ िनिMत ऊंचाई क1 तािलका 2019
वाली उQ सटीकता बजु ) और एकल धुरी सम?वय
िK7लग और बोRरग मशीन(cid:26) के िलए परीJण क1
ि!थित ─ सटीकता का परीJण
भाग 2 मू7वग टेबल के साथ पोट)ल .कार क1
मशीन (cid:17)
11110000.... आई एस 17248 : 2019/आई एस ओ 8956 : 19 लागू नह- लागू
1986 (cid:24)दस*बर नह-
खराद के नक़ल उपकरण, अिभS या अ?यथा, के 2019
िलए !वीकृित शत U ─ सटीकता का परीJण
11111111.... आई एस 17249 (भाग 1) : 2019/आई एस ओ 19 लागू नह- लागू
11090-1 : 2014 (cid:24)दस*बर नह-
डाई 7सVकग इले;Xो-िड!चाज) मशीन(cid:26) के िलए 2019
टे!ट क1 ि!थित (डाई 7सVकग से ईडीएम) ─
सटीकता का परीJण
भाग 1 एकल-!तंभ मशीन (cid:17) (Zॉस-!लाइड टेबल
और (cid:24)फ;!ड-टेबल)
11112222.... आई एस 17250 : 2019/आई एस ओ 14137 : 19 लागू नह- लागू
2015 (cid:24)दस*बर नह-
तार िवघतु -िनवा)हन मशीन(cid:26) (तार ईडीएम) के 2019
िलए परीJण क1 ि!थित ─ सटीकता का परीJण
11113333.... आई एस 17251 (भाग 1) : 2019/आई एस ओ 19 लागू नह- लागू
14955-1 : 2017 (cid:24)दस*बर नह-
मशीन टूCस ─ मशीन टूCस का पयाव) रणीय 2019
मूCयांकन
भाग 1 उजा-) कुशल के िलए िडज़ाइन पFित
मशीन टूCस
11114444.... आई एस 17251 (भाग 2) : 2019/आई एस ओ 19 लागू नह- लागू
14955-2 : 2018 (cid:24)दस*बर नह-
मशीन टूCस ─ मशीन टूCस का पयाव) रण 2019
मूCयांकन
भाग 2 मशीन टूCस और मशीन टूCस घटक(cid:26) को
दी गई ऊजा ) को मापने के तरीके
11115555.... आई एस 17252 (भाग 1) : 2019/आई एस ओ 19 लागू नह- लागू
15616-1 : 2003 (cid:24)दस*बर नह-
उQ गुणव[ा वाली वे7Cडग और कRटग के िलए 2019
सीओ –लेजर बीम मशीन(cid:26) के िलए !वीकृित
2
परीJण4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
भाग 1 सामा?य िसFांत, !वीकृित क1 ि!थित
11116666.... आई एस 17252 (भाग 2) : 2019/आई एस ओ 19 लागू नह- लागू
15616-2 : 2003 (cid:24)दस*बर नह-
उQ गुणव[ा वाली वे7Cडग और कRटग के िलए 2019
सीओ -लेजर बीम मशीन(cid:26) के िलए !वीकृित
2
परीJण
भाग 2 !थिै तक और गितशील सटीकता का मापन
11117777.... आई एस 17253 (भाग 1) : 2019/आई एस ओ 19 लागू नह- लागू
16090-1 : 2017 (cid:24)दस*बर नह-
मशीन टूCस सुरJा ─ मशी7नग स(cid:17)टर, िम7लग 2019
मशीन, Xांसफर मशीन
भाग 1 सुरJा आव5यकताए ँ
11118888.... आई एस 17254 : 2019/आई एस ओ 16093 : 19 लागू नह- लागू
2017 (cid:24)दस*बर नह-
मशीन टूCस ─ सुरJा ─ ठंडी धातु के िलए िचराइ 2019
मशीन (cid:17)
11119999.... आई एस 17255 : 2019/आई एस ओ/टी आर 19 लागू नह- लागू
16907 : 2015 (cid:24)दस*बर नह-
मशीन टूCस ─ ]यािमतीय I^ु टय(cid:26) के सं_याBमक 2019
.ितपू‘त
22220000.... आई एस 17256 (भाग 1) : 2019/आई एस 19 लागू नह- लागू
ओ/टी आर 17243-1 : 2014 (cid:24)दस*बर नह-
मशीन टूCस 7!पडल ─ 7!पडल हाउ7सग पर 2019
7!पडल कंपन का माप (cid:18)ारा मूCयांकन
भाग 1 रो7लग एिलम(cid:17)ट िबयRरग और इंटी9ल
Kाइव वाल े बीच गित पर .चािलत
22221111.... आई एस 17256 (भाग 2) : 2019/आई एस 19 लागू नह- लागू
ओ/टी आर 17243-2 : 2017 (cid:24)दस*बर नह-
मशीन टूCस 7!पडल ─ गैर-घूण)न वाले िह!स(cid:26) पर 2019
माप (cid:18)ारा 7!पडल कंपन का मूCयांकन
भाग 2 600 आर/िमनट और 30 000 आर/िमनट
के बीच गित पर चलने वाले रो7लग एिलम(cid:17)ट
िबयRरग के साथ डायरे;ट-संचािलत 7!पडल और
बेCट-संचािलत 7!पडल
22222222.... आई एस 17257 : 2019/आई एस ओ 26303 : 19 लागू नह- लागू
2012 (cid:24)दस*बर नह-
मशीन टूCस ─ धातु काटने क1 मशीन टूCस पर 2019
मशी7नग .(cid:24)Zया6 का अCपकािलक Jमता
मूCयांकन
22223333.... आई एस 17258 : 2019/आई एस ओ 23125 : 19 लागू नह- लागू
2015 (cid:24)दस*बर नह-¹भाग IIIµख(cid:2) ड 4º भारत का राजप(cid:10) : असाधारण 5
मशीन टूCस ─ सुरJा ─ टaनग मशीन 2019
22224444.... आई एस 17270 : 2019 19 लागू नह- लागू
इंटेलीज(cid:17)ट प^रवहन पFित (आई टी एस) : ^रवस ) (cid:24)दस*बर नह-
पाcकग अलट) पFित (आर पी ए एस) 2019
22225555.... आई एस 17277 (भाग 1) : 2019/आई एस ओ 19 लागू नह- लागू
16092-1 : 2017 (cid:24)दस*बर नह-
मशीन टूCस सुरJा ─ .से 2019
भाग 1 सुरJा आव5यकताए ँ
22226666.... आई एस 17316 (भाग 1) : 2019/आई एस ओ 19 लागू नह- लागू
16128-1 : 2016 (cid:24)दस*बर नह-
.ाकृितक एवं जैिवक .साधन साम9ी के घटक(cid:26) 2019
और उBपाद(cid:26) क1 तकनीक1 प^रभाषा6 और
मानदडं (cid:26) पर माग)दशe िसFातं
भाग 1 घटक(cid:26) क1 प^रभाषाएं
22227777.... आई एस 17316 (भाग 2) : 2019 19 लागू नह- लागू
.ाकृितक एवं जैिवक .साधन साम9ी के घटक(cid:26) (cid:24)दस*बर नह-
और उBपाद(cid:26) क1 तकनीक1 प^रभाषा6 और 2019
मानदडं (cid:26) पर माग)दशe िसFा?त
भाग 2 घटक(cid:26) और उBपाद(cid:26) के िलए मानदडं
22228888.... आई एस/आई ई सी 62642-1 : 2010 19 लागू नह- लागू
अलाम ) .णाली ─ अितZमण एवं पकड़ .णाली (cid:24)दस*बर नह-
भाग 1 तंI अपJे ाए ँ 2019
22229999.... आई एस/आई ई सी 62642-3 : 2010 19 लागू नह- लागू
अलाम ) .णाली ─ अितZमण एवं पकड़ .णाली (cid:24)दस*बर नह-
भाग 3 िनयंIण एवं सूचना उपकरण 2019
33330000.... आई एस/आई ई सी/टी एस 62642-7 : 2011 19 लागू नह- लागू
अलाम ) .णाली ─ अितZमण एवं पकड़ .णाली (cid:24)दस*बर नह-
भाग 7 अनु.योग (cid:24)दशािनदशf 2019
33331111.... आई एस/आई ई सी 62805-1 : 2017 19 लागू नह- लागू
.काgोCटीय (पी वी) काँच के मापन हते ु पFित (cid:24)दस*बर नह-
भाग 1 धुंध का वण)Zमीय िवतरण एवं स*पूण) 2019
धुंध का माप
33332222.... आई एस/आई ई सी 62805-2 : 2017 19 लागू नह- लागू
.काgोCटीय (पी वी) काँच के मापन हते ु पFित (cid:24)दस*बर नह-
भाग 2 पारग*यता एव ं परावतन) का मापन 2019
33333333.... आई एस/आई ई सी 62820-1-1 : 2016 19 लागू नह- लागू
इमारती आंत^रक सचं ार .णाली (cid:24)दस*बर नह-
भाग 1 तंI अपJे ाए ँ 2019
अनुभाग 1 सामा?य
33334444.... आई एस/आई ई सी/टी एस 62916 : 2017 19 लागू नह- लागू
.काgोCटीय माhूल ─ बायपास डायोड के (cid:24)दस*बर नह-
20196 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
इले;Xो!टे^टक अवतारण का मापन
33335555.... आई एस/आई ई सी 62941 : 2016 19 लागू नह- लागू
भौिमक .काgोCटीय (पी वी) माhूल ─ पी वी (cid:24)दस*बर नह-
माhूल िडज़ाइन िविशiता एवं टाइप !वीकृित के 2019
व‘धत .Bयय हते ु (cid:24)दशािनदशf
33336666.... आई एस/आई ई सी 62979 : 2017 19 लागू नह- लागू
.काgोCटीय माhलु ─ बायपास डायोड ─ (cid:24)दस*बर नह-
उjमीय धावपथ का मापन 2019
इस भारतीय मानक क1 .ितया ँ भारतीय मानक (cid:11)यरू ो, मानक भवन, 9, बहादरु शाह ज़फर माग,) नई (cid:24)दCल ी
110 002 JेIीय काया)लय(cid:26) :नई (cid:24)दCली, कोलकता, चंडीगढ़, चेSई, मुंबई, तथा शाखा काया)लय(cid:26): अहमदाबाद,
बगं लौर, भोपाल, भुवनेgर, कोयंबतूर, गवु ाहाटी, हदै राबाद, जयपुर, नागपुर, कानपुर, पटना, पूणे तथा कोिच म(cid:17) िबZ1
हते ु उपल(cid:11)ध ह। भारतीय मानक(cid:26) को http://www.standardsbis.in (cid:18)ारा इंटरनैट पर खरीदा जा सकता ह ।
डॉ.आर.के बजाज़, वैmा─जी एवं उपमहािनदेशक (मानक1करण)
[िवmापन III/4/असा./393/19]
MINISTRY OF CONSUMER AFFAIRS, FOOD AND PUBLIC DISTRIBUTION
(Department of Consumer Affairs)
(BUREAU OF INDIAN STANDARDS)
NOTIFICATION
New Delhi, the 20th December, 2019
Ref: PUB/3/3/2019-20.— In pursuance of sub-rule (1) of Rule 15 of the Bureau of Indian Standards Rules, 2018, the
Bureau of Indian Standards hereby notifies that the Indian Standards, particulars of which are given in the second column of
schedule hereto annexed has been established on the date indicated against it in third column. The particulars of the standards, if
any, which are given in the fourth column shall also remain in force concurrently till they are cancelled on the date indicated
against them in the fifth column.
SCHEDULE
SL No., Year & Title of the Indian Standards Established Date of No., Year & Title of the Date of
No. Establishment Indian Standards to be Cancellation
Cancelled, if any
(1) (2) (3) (4) (5)
1. IS/ISO 13015 : 2013 19 Dec 2019 NA NA
Woven Fabrics ─ Distortion ─ Determination of Skew
and Bow
2. IS/ISO/IEC 14496-21 : 2006 19 Dec 2019 NA NA
Information Technology ─ Coding of Audio-Visual
Objects
Part 21 MPEG-J Graphics Framework Extensions¹भाग IIIµख(cid:2) ड 4º भारत का राजप(cid:10) : असाधारण 7
(GFX)
3. IS/ISO/IEC 14496-28 : 2012 19 Dec 2019 NA NA
Information Technology ─ Coding of Audio-Visual
Objects
Part 28 Composite Front Representation
4. IS/ISO/IEC 14496-29 : 2015 19 Dec 2019 NA NA
Information Technology ─ Coding of Audio-Visual
Objects
Part 29 Web Video Coding
5. IS 16792 (Part 1/Sec 6) : 2019/IEC 62788-1-6 : 2017 19 Dec 2019 NA NA
Measurement Procedures for Materials used in
Photovoltaic Modules
Part 1 Encapsulants
Section 6 Test Methods for Determining the Degree of
Cure in ethylene-Vinyl Acetate
6. IS 17000 : 2019 19 Dec 2019 NA NA
Sustainable Development of Habitats ─ Indicators
7. IS 17246 : 2019/ISO 3190 : 1975 19 Dec 2019 NA NA
Test Conditions for Turret and Single Spindle Co-
ordinate Drilling Machines with Vertical Spindle ─
Testing of the Accuracy
8. IS 17247 (Part 1) : 2019/ISO 3686-1 : 2000 19 Dec 2019 NA NA
Test Conditions for High Accuracy Turret and Single
Spindle Coordinate Drilling and Boring Machines with
Table of Fixed Height with Vertical Spindle ─ Testing
of the Accuracy
Part 1 Single Column Type Machines
9. IS 17247 (Part 2) : 2019/ISO 3686-2 : 2000 19 Dec 2019 NA NA
Test Conditions for High Accuracy Turret and Single
Spindle Coordinate Drilling and Boring Machines with
Table of Fixed Height with Vertical Spindle ─ Testing
of the Accuracy
Part 2 Portal Type Machines with Moving Table
10. IS 17248 : 2019/ISO 8956 : 1986 19 Dec 2019 NA NA
Acceptance Conditions for Copying Attachments,
Integral or Otherwise, for Lathes ─ Testing of the
Accuracy
11. IS 17249 (Part 1) : 2019/ISO 11090-1 : 2014 19 Dec 2019 NA NA
Test Conditions for Die Sinking Electro-Discharge
Machine (Die Sinking EDM) ─ Testing of the Accuracy
Part 1 Single-Column Machines (Cross-Slide Table
Type and Fixed-Table Type)
12. IS 17250 : 2019/ISO 14137 : 2015 19 Dec 2019 NA NA
Test Conditions for Wire Electrical ─ Discharge
Machines (Wire EDM) ─ Testing of the Accuracy
13. IS 17251 (Part 1) : 2019/ISO 14955-1 : 2017 19 Dec 2019 NA NA
Machine Tools ─ Environmental Evaluation of Machine
Tools
Part 1Design Methodology for Energy-Efficient
Machine Tools
14. IS 17251 (Part 2) : 2019/ISO 14955-2 : 2018 19 Dec 2019 NA NA
Machine Tools ─ Environmental Evaluation of Machine
Tools
Part 2 Methods for Measuring Energy Supplied to
Machine Tools and Machine Tool Components
15. IS 17252 (Part 1) : 2019/ISO 15616-1 : 2003 19 Dec 2019 NA NA
Acceptance Tests for CO -Laser Beam Machines for
28 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC. 4]
High Quality Welding and Cutting
Part 1 General Principles, Acceptance Conditions
16. IS 17252 (Part 2) : 2019/ISO 15616-2 : 2003 19 Dec 2019 NA NA
Acceptance Tests for CO -Laser Beam Machines for
2
High Quality Welding and Cutting
Part 2 Measurement of Static and Dynamic Accuracy
17. IS 17253 (Part 1) : 2019/ISO 16090-1 : 2017 19 Dec 2019 NA NA
Machine Tools Safety ─ Machining Centres, Milling
Machines, Transfer Machines
Part 1 Safety Requirements
18. IS 17254 : 2019/ISO 16093 : 2017 19 Dec 2019 NA NA
Machine Tools ─ Safety ─ Sawing Machines for Cold
Metal
19. IS 17255 : 2019/ISO/TR 16907 : 2015 19 Dec 2019 NA NA
Machine Tools ─ Numerical Compensation of
Geometric Errors
20. IS 17256 (Part 1) : 2019/ISO/TR 17243-1 : 2014 19 Dec 2019 NA NA
Machine Tool Spindles ─ Evaluation of Machine Tool
Spindle Vibrations by Measurements on Spindle
Housing
Part 1Spindles with Rolling Element Bearings and
Integral Drives Operating at Speeds Between 600 min-1
and 30 000 min-1
21. IS 17256 (Part 2) : 2019/ISO/TR 17243-2 : 2017 19 Dec 2019 NA NA
Machine Tool Spindles ─ Evaluation of Spindle
Vibrations by Measurements on Non-Rotating Parts
Part 2 Direct-Driven Spindles and Belt-Driven Spindles
with Rolling Element Bearings Operation at Speeds
Between 600 r/min and 30 000 r/min
22. IS 17257 : 2019/ISO 26303 : 2012 19 Dec 2019 NA NA
Machine Tools ─ Short-Term Capability Evaluation of
Machining Processes on Metal-Cutting Machine Tools
23. IS 17258 : 2019/ISO 23125 : 2015 19 Dec 2019 NA NA
Machine Tools ─ Safety ─ Turning Machines
24. IS 17270 : 2019 19 Dec 2019 NA NA
Intelligent Transport Systems (ITS) : Reverse Parking
Alert System (RPAS)
25. IS 17277 (Part 1) : 2019/ISO 16092-1 : 2017 19 Dec 2019 NA NA
Machine Tools Safety ─ Presses
Part 1 General Safety Requirements
26. IS 17316 (Part 1) : 2019/ISO 16128-1 : 2016 19 Dec 2019 NA NA
Guidelines on Technical Definitions and Criteria for
Natural and Organic Cosmetic Ingredients and Products
Part 1 Definitions for Ingredients and Products
27. IS 17316 (Part 2) : 2019 19 Dec 2019 NA NA
Guidelines on Technical Definitions and Criteria for
Natural and Organic Cosmetic Ingredients and Products
Part 2 Criteria for Ingredients and Products
28. IS/IEC 62642-1 : 2010 19 Dec 2019 NA NA
Alarm Systems ─ Intrusion and Hold-up Systems
Part 1 System Requirements
29. IS/IEC 62642-3 : 2010 19 Dec 2019 NA NA
Alarm Systems ─ Intrusion and Hold-up Systems
Part 3 Control and Indicating Equipment
30. IS/IEC/TS 62642-7 : 2011 19 Dec 2019 NA NA
Alarm Systems ─ Intrusion and Hold-up Systems
Part 7 Applications Guidelines
31. IS/IEC 62805-1 : 2017 19 Dec 2019 NA NA
Method for Measuring Photovoltaic (PV) Glass¹भाग IIIµख(cid:2) ड 4º भारत का राजप(cid:10) : असाधारण 9
Part 1 Measurement of Total Haze and Spectral
Distribution of Haze
32. IS/IEC 62805-2 : 2017 19 Dec 2019 NA NA
Method for Measuring Photovoltaic (PV) Glass
Part 2 Measurement of Transmittance and Reflectance
33. IS/IEC 62820-1-1 : 2016 19 Dec 2019 NA NA
Building Intercom Systems
Part 1 System Requirements
Section 1 General
34. IS/IEC/TS 62916 : 2017 19 Dec 2019 NA NA
Photovoltaic Modules ─ Bypass Diode Electrostatic
Discharge Susceptibility Testing
35. IS/IEC 62941 : 2016 19 Dec 2019 NA NA
Terrestrial Photovoltaic (PV) Modules ─ Guidelines for
Increased Confidence in PV Module Design
Qualification and Type Approval
36. IS/IEC 62979 : 2017 19 Dec 2019 NA NA
Photovoltaic Modules ─ Bypass Diode ─ Thermal
Runaway Test
Copies of these standards are available for sale with Bureau of Indian Standards, Manak Bhawan, 9 Bahadur Shah
Zafar Marg, New Delhi-110002 ; Regional Offices: Kolkata, Chandigarh, Chennai, Mumbai and Branch Offices: Ahmedabad,
Bengaluru, Bhopal, Bhubaneshwar, Coimbatore, Guwahati, Hyderabad, Jaipur, Nagpur, Kanpur, Patna, Pune, Kochi. Online
purchase of Indian Standards can be made at http://www.standardsbis.in.
Dr. R.K. BAJAJ, Sc-G & DDG(Stdn.)
[ADVT.-III/4/Exty./393/19]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.