In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards

## Policy Analysis Report: Amendment to Indian Standard IS 8737 : 2017 **1. Executive Summary:** This report analyzes an amendment to the Indian Standard IS 8737 : 2017, focusing on valve fittings for use with Liquefied Petroleum Gas (LPG) of upto 250 Litre Water Capacity. The Bureau of Indian Standards (BIS) has notified Amendment No. 3 to this standard, effective from May 8, 2025, and remaining in force until November 7, 2025. This report examines the background, rationale, and key provisions of this amendment, as well as its likely impact on manufacturers and users of LPG valve fittings. **2. Introduction:** The purpose of this report is to provide a clear and concise overview of Amendment No. 3 to the Indian Standard IS 8737 : 2017, as notified by the Bureau of Indian Standards (BIS). The analysis is based solely on the information provided in the given text. **3. Policy Overview:** * **Original Policy:** IS 8737 : 2017, Valve Fittings for Use with Liquefied Petroleum Gas LPG of upto 250 Litre Water Capacity Specification Second Revision. * **Core Objective(s):** The original standard likely aims to set specifications and requirements for valve fittings used with LPG containers to ensure safety, quality, and performance. The amendment likely aims to update these requirements. **4. Background and Rationale:** The amendment likely addresses a specific need for revision or clarification within the existing standard. While the text does not explicitly state the reason for the amendment, the periodic nature of standards revision suggests that it could be due to technological advancements, evolving safety standards, or feedback from industry stakeholders regarding the original standard's practical application. **5. Key Provisions / Changes:** This report focuses on Amendment No. 3. * **Specific Part Changed:** While the text does not specify the exact section of the original standard being amended, it indicates that the standard IS 8737: 2017 is subject to Amendment No. 3. * **New Rule/Provision:** The text announces the establishment of Amendment No. 3 to IS 8737: 2017, effective from May 8, 2025, and valid until November 7, 2025. Details of the changes are not contained in the provided text, but rather incorporated in Amendment No. 3 itself. * **Difference/Effect of the Change:** The effect of the change cannot be determined from the provided text. It would depend on the specific requirements altered or introduced by Amendment No. 3. **6. Target Audience and Stakeholders:** The primary target audience and stakeholders are: * Manufacturers of valve fittings for LPG cylinders of up to 250 Litre water capacity. * Suppliers and distributors of these valve fittings. * Users of LPG cylinders utilizing these valve fittings. * The Bureau of Indian Standards (BIS) for implementation and enforcement. **7. Implementation Aspects (Inferred):** * **Responsible Agency/Bodies:** The Bureau of Indian Standards (BIS) is responsible for establishing and notifying the amendment. * **Timelines/Procedures:** The amendment is effective from May 8, 2025, and remains in force until November 7, 2025. Manufacturers have a limited window to comply with the new changes introduced by the amendment. **8. Expected Outcomes / Impact of Changes:** The expected outcome of the amendment, in general, is to enhance the safety, reliability, and performance of valve fittings used with LPG cylinders. Specific impacts depend on the details of Amendment No. 3 itself. Potential impacts include: * Increased compliance costs for manufacturers if the changes require significant alterations to production processes. * Improved safety for end-users due to enhanced valve fitting designs or materials. * Harmonization of Indian standards with international best practices, if the amendment reflects such alignment. **9. Conclusion:** Amendment No. 3 to IS 8737 : 2017 represents a potentially important update to the standards governing valve fittings for LPG cylinders. The notification establishes a limited window from May 8, 2025, to November 7, 2025, during which the amended standard will be in force. Stakeholders, particularly manufacturers, must familiarize themselves with the specific changes introduced by the amendment to ensure compliance and maintain product quality and safety.

Key Entities Referenced