This Extraordinary Gazette notification from the Bureau of Indian Standards (BIS), dated August 1, 2024, announces the establishment and withdrawal of several Indian Standards (IS) based on corresponding International Standards (ISO/IEC). The notification is issued under sub-rule (1) of Rule 15 of the Bureau of Indian Standards Rules, 2018.
Key Changes: Established Standards
14 new or revised Indian Standards (IS) were established on July 24, 2024. These standards cover a range of products and testing methods, including injection containers, styrene-butadiene rubbers, toys, bitumen, medical devices, solid biofuels, and electronic textiles.
Key Changes: Withdrawn Standards
Two older Indian Standards (IS 10511 - 1983 and IS/ISO 10993-7:2008) will be withdrawn on January 24, 2025. This is concurrent with the establishment of their updated replacements.
Impact Analysis
Impact on Manufacturers
Manufacturers using the withdrawn standards will need to transition to the new standards before January 24, 2025.
Impact on Testing Laboratories
Testing laboratories will need to update their testing procedures and equipment to align with the new IS standards. They will need to be familiar with the requirements of the new standards to ensure accurate and reliable testing results.
Impact on Consumers
Consumers will benefit from improved product quality and safety due to the updated standards. The new standards should ensure that products meet higher safety and performance requirements.
Impact on Government
The government, through the BIS, will ensure that the standards are effectively implemented and enforced, promoting fair trade practices and consumer protection.
Suggested Action Items
A timeline for implementation and enforcement should be clearly communicated to all stakeholders.
Key Entities Referenced
Bureau of Indian Standards (BIS): The government agency responsible for issuing and enforcing the Indian Standards.
Bureau of Indian Standards Rules, 2018: The legal framework under which this notification is issued.
International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC): International organizations whose standards form the basis for many of the newly established Indian Standards.
Various IS Numbers (e.g., IS 1984, IS 4518, IS 9873, etc.): Specific Indian Standards that have been established, revised, or withdrawn as per this notification.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-01082024-255988
xxxGIDHxxx
CG-DL-E-01082024-255988
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 585] नई दिल्ली, बृहस्ट्प जतिार, अगस्ट्त 1, 2024/श्रािण 10, 1946
No. 585] NEW DELHI, THURSDAY, AUGUST 1, 2024/SHRAVANA 10, 1946
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल ेजिभाग)
अजधसचू ना
नई दिल्ली, 25 िुलाई, 2024
सिं भ:भ HQ-PUB013/1/2020-PUB-BIS (976).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण में भारतीय मानक ब्यूरो एति्द्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के जििरण
इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ में दिये गये ह,ैं तीसरे स्ट्तभं में इंजगत जतजि को स्ट्िाजपत हो गये ह|ैं चौिे स्ट्तंभ में दिय े
गय े मानकों के जििरण, यदि कोई हो तो ि े भी साि-साि लाग ू रहगें े िब तक ि े पााँचि ें स्ट्तंभ में इंजगत जतजि को िापस जलए
िाने ह|ैं
अनसु चू ी
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस िापस होन ेकी
स.ं जतजि
िर् भतिा िीर्कभ जलए िान ेह,ैं की सख्ं या, िर् भ
तिा िीर्कभ
(1) (2) (3) (4) (5)
1 आई एस 1984 (भाग 6) : 2024 24 िुलाई 2024 लाग ू नहीं लाग ू नहीं
आई एस ओ 8362-6 : 2010
इंिेक्िन कंटेनर और सहायक उपकरण
4776 GI/2024 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
भाग 6 इंिेक्िन िीजियों के जलए
एल्यूमीजनयम-प्लाजस्ट्टक संयोिन स े बन े
कैप
2 आई एस 4518 (भाग 4/अनुभाग 1) : 24 िुलाई 2024 लाग ू नहीं लाग ू नहीं
2024
आई एस ओ 21561-1 : 2015
स्ट्टाइरीन-ब्यूटाडीन रबड़ — परीक्षण
पद्धजतयााँ
भाग 4 सॉल्यिू न-पॉलीमराइज्ड
एसबीआर की सूक्ष्म संरचना का
जनधाभरण
अनुभाग 1 1H-एनएमआर और
आईआर कास्ट्ट-दिल्म जिजध के साि
3 आई एस 4518 (भाग 4/अनुभाग 2) : 24 िुलाई 2024 लाग ू नहीं लाग ू नहीं
2024
आई एस ओ 21561-2 : 2016
स्ट्टाइरीन-ब्यूटाडीन रबड़ — परीक्षण
पद्धजतयााँ
भाग 4 सॉल्यिू न-पॉलीमराइज्ड
एसबीआर की सूक्ष्म संरचना का
जनधाभरण
अनुभाग 2 एिटीआईआर के साि
एटीआर पद्धजत
4 आई एस 9873 (भाग 11) : 2024 24 िुलाई 2024 लाग ू नहीं लाग ू नहीं
आई एस ओ 8124-11 : 2019
जखलौनों की सुरक्षा
भाग 11 प्रायोजगक सेट के अलािा
रासायजनक जखलौने (सेट)
5 आई एस 10511 : 2024 24 िुलाई 2024 आई एस 10511 - 1983 24 िनिरी 2025
नॉमभल हप्े टेन के साि अिक्षेपण द्वारा नॉमभल हप्े टेन के साि अिक्षेपण
जबटुमेन म ें एस्ट्िाल्टीन के जनधाभरण की द्वारा जबटुमेन म ें एस्ट्िाल्टीन के
पद्धजत जनधाभरण की पद्धजत
(पहला पुनरीक्षण)
6 आई एस 17932 (भाग 5) : 2024 24 िुलाई 2024 आई एस/आई एस ओ 10993- 24 िनिरी 2025
जचदकत्सा उपकरणों का िैजिक 7 : 2008
मूल्यांकन
जचदकत्सा युजियों का िैजिक
भाग 5 ईिीलीन ऑक्साइड जिसंक्रमण मूल्यांकन
अििेर् भाग 7 एजिलीन ऑक्साइड
(ISO 10993-7 : 2008, संिोजधत) जिसंक्रमण िेर्[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
7 आई एस 18640 : 2024 24 िुलाई 2024 लाग ू नहीं लाग ू नहीं
ठोस िैिईंधन — नमनू ा तैयार करना
8 आई एस 18671 : 2024 24 िुलाई 2024 लाग ू नहीं लाग ू नहीं
आई एस ओ 17509 : 2016
ितं जचदकत्सा — हडैं पीस के जलए टॉकभ
रांसमीटर
9 आई एस 18681 (भाग 3) : 2024 24 िुलाई 2024 लाग ू नहीं लाग ू नहीं
आई एस ओ 6360-3 : 2005
ितं जचदकत्सा — रोटरी उपकरणों के
जलए संख्या कोडडगं प्रणाली
भाग 3 बसभ और कटसभ की जिजिष्ट
जििेर्ताएाँ
10 आई एस 18724 : 2024 24 िुलाई 2024 लाग ू नहीं लाग ू नहीं
ठोस िैि ईंधन — ईंधन जिजिजष्टयााँ
और श्रेजणया ाँ— कृजर् और िड़ी-बूटटयों
के अििेर्ों स ेप्राप्त छरे
11 आई एस 18725 : 2024 24 िुलाई 2024 लाग ू नहीं लाग ू नहीं
ठोस ििै ईंधन — ईंधन जिजिजष्टयााँ
और श्रेजणया ाँ— कृजर् और िड़ी-बूटटयों
के अििेर्ों स ेप्राप्त जिकेट
12 आई एस 18729 : 2024 24 िुलाई 2024 लाग ू नहीं लाग ू नहीं
आई एस ओ/टी एस 13498 : 2011
ितं जचदकत्सा — एंडोससेओस डेंटल
इम्प्लांट जसस्ट्टम्स के इम्प्लांट
बॉडी/कनेडक्टंग पाटभ िॉइंट्स के जलए
टॉरिन टेस्ट्ट
13 आई एस/आई एस ओ/आई ई सी 24 िुलाई 2024 लाग ू नहीं लाग ू नहीं
21823-2 : 2020
इंटरनेट ऑि डिंग्स (आई ओ टी) आई
ओ टी जसस्ट्टम के जलए
इंटरऑपरेजबजलटी
भाग 2 पटरिहन इंटरऑपरेजबजलटी
14 आई एस/आई ई सी 63203-204-1 : 24 िुलाई 2024 लाग ू नहीं लाग ू नहीं
2023
िेरबल इलेक्रॉजनक जडिाइस एिं4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
टेक्नॉलिीस
भाग 204 इलेक्रॉजनक टेक्सटाइल
अनुभाग 1 ई-टेक्सटाइल उत्पािों की
धुलाई स्ट्िाजयत्ि मूल्यांकन की परीक्षण
पद्धजत
पी. रािेि, िैज्ञाजनक िी एिं उप महाजनिेिक (आई टी एस, पी आर टी एिं टी एन एम)
[जिज्ञापन-III/4/असा./354/2024-25]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 25th July, 2024
Ref: HQ-PUB013/1/2020-PUB-BIS (976).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
which are given in the second column of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
Sl No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be Withdrawal
Withdrawn, if any
(1) (2) (3) (4) (5)
IS 1984 (Part 6) : 2024
ISO 8362-6 : 2010 24 July 2024
1 Injection Containers and Accessories NA NA
Part 6 Caps Made of Aluminium-
Plastics Combinations for Injection
Vials
IS 4518 (Part 4/Sec 1) : 2024
ISO 21561-1 : 2015 24 July 2024
Styrene-Butadiene Rubbers — Methods
of Test
2 NA NA
Part 4 Determination of the
Microstructure of Solution-Polymerized
SBR
Section 1 1H-NMR and IR with Cast-
Film Method
IS 4518 (Part 4/Sec 2) : 2024
ISO 21561-2 : 2016 24 July 2024
Styrene Butadiene Rubbers — Methods
3 of Test NA NA
Part 4 Determination of the
Microstructure of Solution-Polymerized
SBR
Section 2 FTIR with ATR Method
4 IS 9873 (Part 11) : 2024 24 July 2024 NA NA
ISO 8124-11 : 2019[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5
Safety of Toys
Part 11 Chemical Toys (Sets) Other than
Experimental Sets
IS 10511 : 2024 24 July 2024 IS 10511 - 1983
Method for Determination of Method for Determination 24 January 2025
5 Asphaltenes in Bitumen by Precipitation of Asphaltenes in Bitumen
with Normal Heptane by Precipitation with
(First Revision) Normal Heptane
IS 17932 (Part 5) : 2024 24 July 2024
IS/ISO 10993-7 : 2008
Biological Evaluation of Medical 24 January 2025
Biological Evaluation of
6 Devices
Medical Devices
Part 5 Ethylene Oxide Sterilization
Residuals Part 7 Ethylene Oxide
Sterilization Residuals
(ISO 10993-7 : 2008, MOD)
IS 18640 : 2024
7 NA NA
Solid Biofuels — Sample Preparation 24 July 2024
IS 18671 : 2024
ISO 17509 : 2016 24 July 2024
8 NA NA
Dentistry — Torque Transmitter for
Handpieces
IS 18681 (Part 3) : 2024 24 July 2024
ISO 6360-3 : 2005
9 NA NA
Dentistry — Number Coding System for
Rotary Instruments
Part 3 Specific Characteristics of Burs
and Cutters
IS 18724 : 2024 24 July 2024
10 NA NA
Solid Biofuels — Fuel Specifications
and Classes — Pellets from Agro and
Herbaceous Residues
IS 18725 : 2024 24 July 2024
11 NA NA
Solid Biofuels — Fuel Specifications
and Classes — Briquettes from Agro
and Herbaceous Residues
IS 18729 : 2024 24 July 2024
12 ISO/TS 13498 : 2011 NA NA
Dentistry — Torsion Test of Implant
Body/Connecting Part Joints of
Endosseous Dental Implant Systems6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
IS/ISO/IEC 21823-2 : 2020 24 July 2024
13 Internet of Things (IoT) — NA NA
Interoperability for Iot Systems
Part 2 Transport Interoperability
IS/IEC 63203-204-1 : 2023 24 July 2024
Wearable Electronic Devices and
Technologies
14 NA NA
Part 204 Electronic Textile
Section 1 Test Method for Assessing
Washing Durability of E-Textile
Products
P. RAJESH, Scientist G & DDG (ITS, PRT & TNM)
[ADVT. -III/4/Exty./354/2024-25]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.