The gazette notification issued by the Bureau of Indian Standards (BIS) announces the establishment and revision of several Indian Standards. It specifies the dates on which the new standards take effect and the corresponding dates for the withdrawal of superseded standards, if applicable. Some standards will run concurrently for a limited time.
Key Changes
A total of 11 Indian Standards have been updated or newly established.
IS 354 (Part 4): 2024 replaces IS 354 (Part 4) - 1986, effective April 22, 2024, with the older standard being withdrawn on July 22, 2024. This standard concerns methods of sampling and testing epoxy resins for paints.
IS 354 (Part 5): 2024 replaces IS 354 (Part 5) - 1986, effective April 22, 2024, with the older standard being withdrawn on July 22, 2024. This standard concerns methods of sampling and testing polyamide resins for paints.
IS 2267 (Part 2): 2024 replaces IS 2267: 1995, effective April 22, 2024, with the older standard being withdrawn on May 22, 2024. This standard relates to polystyrene moulding and extrusion materials.
IS 4311: 2024 replaces IS 4311 – 1967, effective April 22, 2024, with the older standard being withdrawn on May 22, 2024. This standard pertains to the determination of mineral matter in coal and references ISO 602: 2015.
IS 5785 (Part 1): 2024 replaces IS 5785 (Part I) - 1970, effective April 22, 2024, with the older standard being withdrawn on July 22, 2024. This standard covers methods of testing surface active agents.
IS 13055: 2024 replaces IS 13055: 1991, effective April 22, 2024, with the older standard being withdrawn on May 22, 2024. This standard relates to methods of sampling and testing anaerobic adhesives and sealants.
IS 13360 (Part 6/Section 24): 2024 replaces IS 13360 (Part 6/Section 24): 2018, effective April 22, 2024, with the older standard being withdrawn on May 22, 2024. This standard concerns the determination of burning characteristics of cellular plastics and references ISO 9772: 2020.
IS 18570: 2024, IS 18571: 2024, IS 18572: 2024 and IS 18574: 2024 are newly established standards for ophthalmic instruments and contact lens care products, effective April 22, 2024. They do not replace any existing Indian Standards.
Impact Analysis
Manufacturers and Suppliers
Action Item: Update product documentation and labeling to reflect compliance with the latest BIS standards.
Testing Laboratories
Action Item: Train personnel on the updated testing procedures.
Consumers
Action Item: Look for the BIS certification mark on products to ensure compliance with the updated standards.
Government Agencies
Action Item: Update procurement guidelines and quality control procedures to reference the latest BIS standards.
Key Entities Referenced
Bureau of Indian Standards (BIS): The national standards body of India responsible for formulating and promoting standards for goods and services.
Indian Standards (IS): A set of standards developed by the Bureau of Indian Standards covering various products, processes, and services.
ISO (International Organization for Standardization): An independent, non-governmental international organization that develops standards to ensure the quality, safety, and efficiency of products, services, and systems.
IS 354 (Part 4): Indian Standard for Resins for Paints — Methods of Sampling and Test Part 4 Special Test Methods for Epoxy Resins
IS 354 (Part 5): Indian Standard for Resins for Paints — Methods of Sampling and Test Part 5 Special Test Methods for Polyamide Resins
IS 2267 (Part 2): Indian Standard for Polystyrene Moulding and Extrusion Materials — Part 2 Preparation of Test Specimens and Determination of Properties
IS 4311: Indian Standard for Coal — Determination of Mineral Matter
IS 5785 (Part 1): Indian Standard for Surface Active Agents — Methods of Test Part 1 Relative Dispersing Power
IS 13055: Indian Standard for Methods of Sampling and Test for Anaerobic Adhesives and Sealants
IS 13360 (Part 6/Sec 24): Indian Standard for Plastics — Methods of Testing Part 6 Thermal Properties Section 24 Cellular Plastics — Determination of Horizontal Burning Characteristics of Small Specimens Subjected to a Small Flame
IS 18570: Indian Standard for Ophthalmic Instruments — Refractor Heads
IS 18571: Indian Standard for Ophthalmic Instruments — Synoptophores
IS 18572: Indian Standard for Ophthalmic Instruments — Ophthalmometers
IS 18574: Indian Standard for Ophthalmic Optics — Contact Lens Care Products — Method to Assess Contact Lens Care Products with Contact Lenses in a Lens Case, Challenged with Bacterial and Fungal Organism
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
xxxGIDHxxx
सी.जी.-डी.एल.-अ.-30042024-253972
xxxGIDExxx
CG-DL-E-30042024-253972
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 299] नई दिल्ली, सोम ार, अप्रैल 29, 2024/ िै ाख 9, 1946
No. 299] NEW DELHI, MONDAY, APRIL 29, 2024/VAISAKHA 9, 1946
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल ेज भाग)
अजधसचू ना
नई दिल्ली, 25 अप्रैल, 2024
सिं भ:भ HQ-PUB013/1/2020-PUB-BIS (850).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण में भारतीय मानक ब्यूरो एति्द्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के ज रण
इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ म ें दिये गय े ह,ैं तीसरे स्ट्तभं में इंजगत जतजि को स्ट्िाजपत हो गये ह।ैं चौिे स्ट्तंभ में दिय े
गय े मानकों के ज रण, यदि कोई हो तो े भी साि-साि लाग ू रहगें े िब तक े पााँच ें स्ट्तंभ में इंजगत जतजि को ापस जलए
िाने ह।ैं
अनसु चू ी
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि ापस ापस होन ेकी
स.ं जतजि
र् भतिा िीर्कभ जलए िान ेह,ैं की सख्ं या, र् भ
तिा िीर्कभ
(1) (2) (3) (4) (5)
1 आई एस 354 (भाग 4) : 2024 22 अप्रैल 2024 आई एस 354 (भाग 4) - 1986 22 िुलाई 2024
पेंट के जलए रेजिन — नमनू े लेन े और पेंट के जलए रेजिन के नमून े लने े
2808 GI/2024 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
परीक्षण पद्धजतयााँ और परीक्षण पद्धजतया ाँ
भाग 4 एपॉक्सी रेजिन के जलए ज िेर् भाग 4 एपॉक्सी रेजिन के जलए
परीक्षण पद्धजतयााँ ज िेर् परीक्षण पद्धजतया ाँ
(तीसरा पनु रीक्षण) (िसू रा पनु रीक्षण)
2 आई एस 354 (भाग 5) : 2024 22 अप्रैल 2024 आई एस 354 (भाग 5) - 1986 22 िुलाई 2024
पेंट के जलए रेजिन — नमनू े लेन े और पेंट के जलए रेजिन के नमून े लने े
परीक्षण पद्धजतया ाँ और परीक्षण पद्धजतया ाँ
भाग 5 पॉजलऐमाइड रेजिन के जलए भाग 5 पॉजलऐमाइड रेजिन के
ज िेर् परीक्षण पद्धजतया ाँ जलए ज िेर् परीक्षण पद्धजतया ाँ
(तीसरा पनु रीक्षण) (िसू रा पनु रीक्षण)
3 आई एस 2267 (भाग 2) : 2024 22 अप्रैल 2024 आई एस 2267 : 1995 22 मई 2024
आई एस ओ 24022-2 : 2020 पोजलयस्ट्रीन संचकन और
बजह ेधन सामजग्रयां — ज जिजि
पॉलीस्ट्टाइरीन (पीएस) मोलल्डंग और
(िसू रा पनु रीक्षण)
एक्सट्रूिन सामग्री
भाग 2 परीक्षण नमनू ों की तैयारी और
गुणों का जनधाभरण
(तीसरा पनु रीक्षण)
4 आई एस 4311 : 2024 22 अप्रैल 2024 आई एस 4311 – 1967 22 मई 2024
आई एस ओ 602 : 2015 कोयले के खजनि पिाि भ के
जनधाभरण के जलए ज जध
कोयला — खजनि पिाि भ का जनधाभरण
(पहला पुनरीक्षण)
5 आई एस 5785 (भाग 1) : 2024 22 अप्रैल 2024 आई एस 5785 (भाग I) - 22 िुलाई 2024
सतह सदक्रय अजभकमभक — परीक्षण 1970
पद्धजतयााँ
सतह सदक्रय अजभकमभक के जलए
भाग 1 सापेक्ष फैला िजि प्रििभन परीक्षण के तरीके
(पहला पुनरीक्षण) भाग I सापेक्ष फैला िजि
6 आई एस 13055 : 2024 22 अप्रैल 2024 आई एस 13055 : 1991 22 मई 2024
अ ायुिी ी आसंिक और सीलबंि एनरोजबक आसंिक और
सामजग्रयों के जलए नमून े लने े तिा मुहरबन्िी सामग्री के नमून े लने े
परीक्षण की पद्धजतयााँ और परीक्षण की पद्धजतया ाँ
(पहला पुनरीक्षण)
7 आई एस 13360 (भाग 6/अनभु ाग 24) 22 अप्रैल 2024 आई एस 13360 (भाग 22 मई 2024
: 2024 6/अनुभाग 24) : 2018
आई एस ओ 9772 : 2020 आई एस ओ 9772 : 2012
प्लाजस्ट्टक — परीक्षण पद्धजतया ाँ प्लाजस्ट्टक — परीक्षण पद्धजतया ाँ[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
भाग 6 तापीय गणु धम भ भाग 6 तापीय गणु धम भ
अनुभाग 24 सेलुलर प्लाजस्ट्टक — छोटे अनुभाग 24 सेलुलर प्लाजस्ट्टक
नमूनों की छोटी लौ के अधीन क्षैजति — छोटे नमूनों की छोटी लौ के
िलन े की ज िेर्ताओं का जनधारभ ण अधीन क्षैजति िलन े की
(पहला पुनरीक्षण) ज िेर्ताओं का जनधाभरण
8 आई एस 18570 : 2024 22 अप्रैल 2024 लाग ूनहीं लाग ूनहीं
नेत्र संबंधी उपकरण — रेफ्रेक्टर हड्े स
(ISO 10341 : 2012, संिोजधत)
9 आई एस 18571 : 2024 22 अप्रैल 2024 लाग ूनहीं लाग ूनहीं
नेत्र संबंधी उपकरण — जसनोप्टोफोरस
(ISO 10944 : 2009, संिोजधत)
10 आई एस 18572 : 2024 22 अप्रैल 2024 लाग ूनहीं लाग ूनहीं
नेत्र संबंधी उपकरण — नेत्रमापी यंत्र
(ISO 10343 : 2014, संिोजधत)
11 आई एस 18574 : 2024 22 अप्रैल 2024 लाग ूनहीं लाग ूनहीं
आई एस ओ 18259 : 2014
नेत्र प्रकाजिकी — संपकभ लेंस िखे रेख
उत्पाि — कॉन्टैक्ट लेंस िेखरेख उत्पाि
का आंकलन करने की ज जध,
बैक्टीररयल और फंगल िी ों के द्वारा
चुनौतीपूणभ जस्ट्िजत म ें िब लेंस आ रण
म ें हो
पी. रािेि, ैज्ञाजनक िी ए ं उप महाजनिेिक (आई टी एस, पी आर टी ए ं टी एन एम)
[ज ज्ञापन-III/4/असा./068/2024-25]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 25th April, 2024
Ref: HQ-PUB013/1/2020-PUB-BIS (850).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
which are given in the second column of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be Withdrawal
Withdrawn, if any
(1) (2) (3) (4) (5)
1 22 April 2024 22 July 2024
IS 354 (Part 4) : 2024 IS 354 (Part 4) - 1986
Resins for Paints — Methods of Methods of Sampling and Test4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
Sampling and Test for Resins for Paints
Part 4 Special Test Methods for Epoxy Part 4 Special Test Methods for
Resins Epoxy Resins
(Third Revision) (Second Revision)
IS 354 (Part 5) : 2024 IS 354 (Part 5) - 1986
Resins for Paints — Methods of Methods of Sampling and Test
2 Sampling and Test 22 April 2024 for Resins for Paints 22 July 2024
Part 5 Special Test Methods for Part 5 Special Test Methods for
Polyamide Resins Polyamide Resins
(Third Revision) (Second Revision)
IS 2267 (Part 2) : 2024
3
ISO 24022-2 : 2020
IS 2267 : 1995
Polystyrene (PS) Moulding and
Polystyrene Moulding and
Extrusion Materials 22 April 2024 22 May 2024
Extrusion Materials —
Part 2 Preparation of Test Specimens
Specification
and Determination of Properties
(Second Revision)
(Third Revision)
IS 4311 : 2024
ISO 602 : 2015 IS 4311 - 1967
4 22 April 2024 22 May 2024
Coal — Determination of Mineral Method for the Determination
Matter of Mineral Matter in Coal
(First Revision)
IS 5785 (Part 1) : 2024 IS 5785 (Part I) - 1970
Surface Active Agents — Methods of Methods for Performance Tests
5 Test 22 April 2024 for Surface Active Agents 22 July 2024
Part 1 Relative Dispersing Power Part I Relative Dispersing
(First Revision) Power
IS 13055 : 1991
IS 13055 : 2024 Methods of Sampling and Test
6 Methods of Sampling and Test for 22 April 2024 for Anaerobic Adhesives and 22 May 2024
Anaerobic Adhesives and Sealants Sealants
(First Revision)
IS 13360 (Part 6/Sec 24) : 2018
IS 13360 (Part 6/Sec 24) : 2024
ISO 9772 : 2012
ISO 9772 : 2020
Plastic — Method of Testing
Plastics — Methods of Testing
Part 6 Thermal Properties
Part 6 Thermal Properties
7 22 April 2024 Section 24 Cellular plastics — 22 May 2024
Section 24 Cellular Plastics —
Determination of horizontal
Determination of Horizontal Burning
burning characteristics of small
Characteristics of Small Specimens
specimens subjected to a small
Subjected to a Small Flame
flame of cellular plastic
(First Revision)
IS 18570 : 2024
8 Ophthalmic Instruments — Refractor 22 April 2024 NA NA
Heads
(ISO 10341 : 2012, MOD)
IS 18571 : 2024
9 Ophthalmic Instruments — 22 April 2024 NA NA
Synoptophores
(ISO 10944 : 2009, MOD)
10 IS 18572 : 2024 22 April 2024 NA NA
Ophthalmic Instruments —[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5
Ophthalmometers
(ISO 10343 : 2014, MOD)
IS 18574 : 2024
ISO 18259 : 2014
Ophthalmic Optics — Contact Lens
11 Care Products — Method to Assess 22 April 2024 NA NA
Contact Lens Care Products with
Contact Lenses in a Lens Case,
Challenged with Bacterial and Fungal
Organism
P. RAJESH, Scientist G & DDG (ITS, PRT & TNM)
[ADVT.-III/4/Exty./068/2024-25]
5Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.