In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments

## Policy Analysis Report: Amendments to Indian Standards **1. Executive Summary:** This report analyzes a notification from the Bureau of Indian Standards (BIS) regarding amendments to two existing Indian Standards: IS 3502:2009 (Steel Chequered Plates) and IS 4296 Part 2: 2024 (Tools for Pressing Punches). The amendments, numbered 2 and 1 respectively, are effective from May 5, 2025, and will remain in force until November 4, 2025. This report details the changes, their potential impact, and the bodies responsible for their implementation, based solely on the provided notification. **2. Introduction:** This report aims to provide stakeholders in the steel and tooling industries with an overview of recent amendments to Indian Standards IS 3502:2009 and IS 4296 Part 2: 2024, as notified by the Bureau of Indian Standards on May 7, 2025. The analysis is based solely on the information contained within the provided policy text. **3. Policy Overview:** * This report concerns amendments to existing policies. * **Original Policies:** IS 3502:2009 (Steel Chequered Plates, Third Revision) and IS 4296 Part 2: 2024 (Tools for Pressing Punches Part 2 Punches with Cylindrical Head and Straight or Reduced Shank Second Revision). * **Core Objective(s):** The text does not explicitly state the original policies' objectives. However, it can be inferred that these standards aim to establish quality benchmarks and specifications for steel chequered plates and tools for pressing punches, respectively, to ensure consistency and safety. The amendments aim to update and improve these existing standards. **4. Background and Rationale:** The provided text does not explicitly state the reasons for these specific amendments. However, it can be inferred that the amendments were implemented to address potential gaps, inaccuracies, or areas requiring refinement in the original standards based on advancements in technology, feedback from industry stakeholders, or evolving regulatory requirements. The short duration for which the amendments are in force suggests these may be temporary adjustments. **5. Key Provisions / Changes:** This section details the changes introduced by the amendments. * **Amendment 2 to IS 3502:2009 (Steel Chequered Plates):** The provided text indicates that Amendment No. 2 to IS 3502:2009 has been established. * **Specific Part Changed:** The text does not specify which section of the original standard is being amended. * **New Rule/Provision:** The specific details of the amendment (what is being added, removed, or altered) are *not* detailed in the provided text. Therefore, we can only say that *some* aspect of the Steel Chequered Plates standard has been updated. * **Difference/Effect:** The exact difference and effect of Amendment No. 2 cannot be determined based on the provided text alone. * **Amendment 1 to IS 4296 Part 2: 2024 (Tools for Pressing Punches):** The provided text indicates that Amendment No. 1 to IS 4296 Part 2: 2024 has been established. * **Specific Part Changed:** The text does not specify which section of the original standard is being amended. * **New Rule/Provision:** The specific details of the amendment (what is being added, removed, or altered) are *not* detailed in the provided text. Therefore, we can only say that *some* aspect of the Tools for Pressing Punches standard has been updated. * **Difference/Effect:** The exact difference and effect of Amendment No. 1 cannot be determined based on the provided text alone. **6. Target Audience and Stakeholders:** Based on the text, the direct stakeholders affected by these amendments are: * Manufacturers and suppliers of steel chequered plates. * Manufacturers and suppliers of tools for pressing punches. * Users of steel chequered plates (e.g., construction, transportation industries). * Users of tools for pressing punches. * The Bureau of Indian Standards. * The Department of Consumer Affairs. **7. Implementation Aspects (Inferred):** * **Responsible Agency/Bodies:** The Bureau of Indian Standards (BIS), under the Department of Consumer Affairs, is responsible for implementing and enforcing these amendments. * **Timelines:** The amendments are effective from May 5, 2025, and will remain in force until November 4, 2025. This suggests a temporary implementation period, potentially for evaluation or a trial period. * **Procedures:** The text does not detail specific procedures for implementing the amendments. It is expected that BIS will communicate further details regarding compliance requirements to relevant stakeholders. **8. Expected Outcomes / Impact of Changes:** Without the specific details of the amendments, it's difficult to provide a precise analysis. However, the general intended outcomes *of these specific changes* are likely: * Improved quality and performance of steel chequered plates and tools for pressing punches. * Enhanced safety standards in industries using these products. * Greater clarity and consistency in manufacturing and testing processes. * Potential for increased competitiveness for manufacturers adhering to the updated standards. * Since the changes are only in force for six months, these may be a temporary trial period to see the effects of the changes before a permanent revision of the standard. **9. Conclusion:** The Bureau of Indian Standards has notified amendments to Indian Standards IS 3502:2009 and IS 4296 Part 2: 2024, effective from May 5, 2025, to November 4, 2025. These amendments likely aim to improve the quality, safety, and performance standards for steel chequered plates and tools for pressing punches. However, the specific details and impact of these amendments cannot be fully assessed based solely on the provided notification text. Stakeholders in the affected industries should seek further information from the Bureau of Indian Standards regarding the specific details of the amendments and their compliance requirements. The short duration for which the amendments are in force should be noted.

Key Entities Referenced