In pursuance of Sub rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments to Indian standards

## Policy Analysis Report: Amendment to Indian Standard IS 18316:2023 **1. Executive Summary:** This report analyzes an amendment to the Indian Standard IS 18316:2023, concerning Hot-Rolled and Cold-Rolled Steel Strips. The Bureau of Indian Standards (BIS) has established Amendment No. 1, effective April 22, 2025, with the standard without the amendment remaining in force until October 21, 2025. This report aims to inform stakeholders, particularly those involved in the processing or manufacturing of electrical steel, about the specifics of this amendment and its implications. The amendment aims to update or refine the existing standard, potentially impacting material specifications or testing procedures. **2. Introduction:** The purpose of this report is to provide a concise overview and analysis of Amendment No. 1 to the Indian Standard IS 18316:2023, as notified by the Bureau of Indian Standards (BIS) on April 24, 2025. The report is based solely on the information provided in the official notification. **3. Policy Overview:** * **Original Policy:** IS 18316 : 2023 - Hot-Rolled and Cold-Rolled Steel Strips Intended for Processing of Semi-Fully Processed Non-Grain Oriented Electrical Steel or Fully Processed Grain Oriented Electrical Steel - Specification. * **Core Objective(s):** To define the specifications for hot-rolled and cold-rolled steel strips intended for the processing of electrical steel. This is inferred from the title of the Indian Standard. **4. Background and Rationale:** The document is an amendment. The rationale for Amendment No. 1 to IS 18316:2023 is likely to address evolving industry needs, technological advancements in steel processing, or to correct any discrepancies or ambiguities identified in the original standard. The specific reason cannot be fully determined from the provided text, however it can be assumed that the change ensures the standard remains relevant and effective. **5. Key Provisions / Changes:** * **Specific Part Changed:** This cannot be determined from the provided text. * **New Rule/Provision:** The Amendment No. 1 was established on April 22, 2025. * **Difference/Effect:** The amendment will be effective until October 21, 2025. After this date, the IS 18316:2023 standard with the amendment in place, will be the only valid version. This suggests a period of transition where businesses can prepare for the updated standard. **6. Target Audience and Stakeholders:** The primary target audience and stakeholders are: * Manufacturers and processors of hot-rolled and cold-rolled steel strips. * Manufacturers of semi-fully processed non-grain oriented electrical steel. * Manufacturers of fully processed grain-oriented electrical steel. * The Bureau of Indian Standards (BIS). * The Department of Consumer Affairs. **7. Implementation Aspects (Inferred):** * **Responsible Agency/Bodies:** The Bureau of Indian Standards (BIS) is the responsible body for establishing and notifying the amendment. * **Timelines/Procedures:** The amendment was established on April 22, 2025, and the original standard remains in force until October 21, 2025. Stakeholders likely have a period until October 21, 2025, to fully integrate the changes introduced by Amendment No. 1. Further details of implementation, such as specific testing or certification procedures, are not provided in this document. **8. Expected Outcomes / Impact of Changes:** The likely intended outcome of Amendment No. 1 is to ensure that the Indian Standard IS 18316:2023 remains up-to-date and relevant to current industry practices and technological advancements in the production and processing of electrical steel. The amendment may lead to improved quality control, enhanced performance of electrical steel products, and potentially, increased efficiency in steel processing. The exact impacts are hard to determine without knowing the content of the amendment. **9. Conclusion:** Amendment No. 1 to Indian Standard IS 18316:2023 represents an update to the specifications for hot-rolled and cold-rolled steel strips used in the production of electrical steel. The BIS has established this amendment, and it is critical for stakeholders involved in the manufacturing and processing of steel strips and electrical steel to understand and implement these changes to ensure compliance and maintain product quality. Stakeholders should seek out the full text of the amendment for full details.

Key Entities Referenced