Home India Bureau of Indian Standards In pursuance of Sub rule 1 of Rule 15 of the Bureau of India...
Date: 03-Jul-2024 Category: Extra Ordinary State: Union Government Country: India

In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards

Issued by Bureau of Indian Standards · Not Applicable

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

Gazette Notification Description

  • This Extraordinary Gazette notification from the Bureau of Indian Standards (BIS), dated July 3, 2024, announces the establishment of new revised Indian Standards (IS) and the concurrent withdrawal of older versions.
  • The notification is issued under Sub-rule (1) of Rule 15 of the Bureau of Indian Standards Rules, 2018.

Key Changes

  • Seven Indian Standards (IS) have been established, replacing older versions. These revisions are based on corresponding ISO standards.
  • The new IS standards are effective from June 6, 2024.
  • The older IS standards will remain concurrently in force until specific withdrawal dates (ranging from September 6, 2024 to December 6, 2024), as detailed in the schedule.
  • The revised standards cover various areas, including: short-pitch transmission roller and bush chains, net pyrradiometers, alpine ski boots and bindings, and plain bearings.

Impact Analysis

Impact on Manufacturers

  • Non-compliance could lead to penalties or market restrictions.

Impact on Importers

  • Similar to manufacturers, non-compliance could lead to penalties or market restrictions.

Impact on Consumers

  • The updated standards may lead to higher prices for some products in the short term.

Impact on Testing and Certification Bodies

  • They may need to invest in new equipment or training.

Suggested Action Items

  • The BIS should provide adequate support and resources to help stakeholders comply with the new standards.

Key Entities Referenced

Bureau of Indian Standards (BIS): The issuing authority of the notification, responsible for setting and enforcing Indian Standards. Bureau of Indian Standards Rules, 2018: The legal framework under which this notification is issued. ISO Standards: International Organization for Standardization standards that the revised Indian Standards are based on. Various Indian Standards (IS): Specific standards listed in the schedule, covering various product categories. Examples include IS 2403, IS 8693, IS 9315, IS 9397, IS 12259, IS 16298, and IS 16764.
Official Source Record View Original Source →
See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99 xxxGIDHxxx सी.जी.-डी.एल.-अ.-04072024-255166 xxxGIDExxx CG-DL-E-04072024-255166 असाधारण EXTRAORDINARY भाग III—खण् ड 4 PART III—Section 4 प्राजधकार स ेप्रकाजित PUBLISHED BY AUTHORITY स.ं 485] नई दिल्ली, बुध ार, िुलाई 3, 2024/आर्ाढ 12, 1946 No. 485] NEW DELHI, WEDNESDAY, JULY 3, 2024/ASHADHA 12, 1946 भारतीय मानक ब्य रू ो (उपभोक्त ा मामल ेज भाग) अजधसचू ना नई दिल्ली, 14 िून, 2024 सिं भ:भ HQ-PUB012/4/2020-PUB-BIS (924).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के ज रण इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ में दिये गये ह,ैं तीसरे स्ट्तभं में इंजगत जतजि को स्ट्िाजपत हो गये हैं| चौिे स्ट्तंभ में दिय े गय े मानकों के ज रण, यदि कोई हो तो े भी साि-साि लाग ू रहगें े िब तक े पााँच ें स्ट्तंभ में इंजगत जतजि को ापस जलए िाने ह|ैं अनसु चू ी क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्िापन भारतीय मानकों, यदि ापस जलए ापस होन ेकी स.ं जतजि जतजि र् भतिा िीर्कभ िान ेह,ैं की सख्ं या, र् भतिा िीर्कभ (1) (2) (3) (4) (5) 1 आई एस 2403 : 2024 6 िून 2024 आई एस 2403 : 2014 6 दिसम्बर 2024 आई एस ओ 606 : 2015 आई एस ओ 606 : 2004 3972 GI/2024 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] िॉर्-भ जपच रांसजमिन जप्रजसिन रोलर लघ-ु जपच पारेर्ण सर्ीक रोलर और और बुि चेन, अर्ैचमेंर् और बुि िंिीर, संलग्नक और संबद्ध चेन एसोजसएर्ेड चेन स्ट्प्रोकेर् स्ट्परोकेट्स (चौिा पनु रीक्षण) (तीसरा पनु रीक्षण) 2 आई एस 8693 : 2024 6 िून 2024 आई एस 8693 - 1978 6 जसतम्बर 2024 नेर् पाइरेजडयोमीर्र के जलए नेर् पाइरेजडयोमीर्र — ज जिजि ज जिजि (पहला पुनरीक्षण) 3 आई एस 9315 : 2024 6 िून 2024 आई एस 9315 – 1979 6 जसतम्बर 2024 आई एस ओ 5355 : 2019 अल्पाइन स्ट्की के जलए बूर्/बाइंडडंग अल्पाइन स्ट्की-बूर् — अपेक्षाए ाँऔर इंर्रफ़ेस के आयाम (आकार 36 से परीक्षण पद्धजतयााँ अजधक) (पहला पुनरीक्षण) 4 आई एस 9397 : 2024 6 िून 2024 आई एस 9397 : 2001 6 जसतम्बर 2024 आई एस ओ 8364 : 2017 आई एस ओ 8364 : 1991 अल्पाइन स्ट्की और बाइंडडंग — अल्पाइन स्ट्काइंग ए ंबाइडडंग — बाइंडडंग माउटर्ंग क्षेत्र — अपक्षे ाएाँ बाइडडंग प भतारोहण क्षेत्र — और परीक्षण पद्धजतया ाँ अहतभ ाएं ए ं परीक्षण पद्धजतयां (िसू रा पनु रीक्षण) (पहला पुनरीक्षण) 5 आई एस 12259 : 2024 6 िून 2024 आई एस 12259 : 2018 6 जसतम्बर 2024 आई एस ओ 7331 : 2020 आई एस ओ 7331 : 2011 अल्पाइन और पयभर्न स्ट्कीइंग के जलए अल्पाइन स्ट्कीइंग के जलए स्ट्की-पोल स्ट्की-पोल — अपेक्षाए ाँऔर परीक्षण —आ श्यकताए ंऔर परीक्षण पद्धजतया ाँ ज जधयां (तीसरा पनु रीक्षण) (िसू रा पनु रीक्षण) 6 आई एस 16298 : 2024 6 िून 2024 आई एस 16298 : 2017 6 जसतम्बर 2024 आई एस ओ 6280 : 2018 आई एस ओ 6280 : 1981 प्लेन जबयटरंग्स — मोर्ी िी ार ाली प्लेन बेयटरंग— मोर्ी िी ार ाली बहुपरत जबयटरंग्स के जलए बैककंग की बहुपरत बेयटरंग की बैककंग की अपेक्षाएाँ और मागभििभन सक्षम िरूरतें (पहला पुनरीक्षण)[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3 7 आई एस 16764 : 2024 6 िून 2024 आई एस 16764 : 2018 6 जसतम्बर 2024 आई एस ओ 8061 : 2019 आई एस ओ 8061 : 2015 अल्पाइन स्ट्की बाइंडडंग — ररलीज़ अल्पाइन स्ट्की बाइंडडंग — ररलीि र्ॉकभ मान का चयन र्ोरूग मान का चयन (पहला पुनरीक्षण) पी रािेि, ैज्ञाजनक िी ए ं उप महाजनिेिक (आई र्ी एस, पी आर र्ी ए ं र्ी एन एम) [ज ज्ञापन-III/4/असा./254/2024-25] BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 14th June, 2024 Ref: HQ-PUB012/4/2020-PUB-BIS (924).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column. SCHEDULE Sl.No. No., Year & Title of the Indian Date of No. , Year & Title of the Date of Standards Established Establishment Indian Standards to be Withdrawal Withdrawn, if any (1) (2) (3) (4) (5) 1 IS 2403 : 2024 6 June 2024 IS 2403 : 2014 6 December 2024 ISO 606 : 2015 ISO 606 : 2004 Short-Pitch Transmission Precision Short-Pitch Transmission Roller and Bush Chains, Attachments Precision Roller and Bush and Associated Chain Sprockets Chains, Attachments and (Fourth Revision) Associated Chain Sprockets (Third Revision) 2 IS 8693 : 2024 6 June 2024 IS 8693 - 1978 6 September 2024 Net Pyrradiometer — Specification Specification for Net (First Revision) Pyrradiometer 3 IS 9315 : 2024 6 June 2024 IS 9315 - 1979 6 September 2024 ISO 5355 : 2019 Dimensions for Alpine Ski-Boots — Requirements Boot/Binding Interface and Methods of Test (Greater Than Size 36) for (First Revision) Alpine Skis 4 IS 9397 : 2024 6 June 2024 IS 9397 : 2001 6 September 2024 ISO 8364 : 2017 ISO 8364 : 1991 Alpine-Skis and Bindings — Binding Alpine-Skis and Bindings —4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] Mounting Area — Requirements and Binding Mounting Area — Methods of Test Requirements and Test (Second Revision) Methods (First Revision) 5 6 June 2024 IS 12259 : 2018 6 September 2024 IS 12259 : 2024 ISO 7331 : 2011 ISO 7331 : 2020 Ski-poles for Alpine Skiing Ski-poles for Alpine and Touring — Requirements and Test Skiing — Requirements and Methods Methods of Test (Second Revision) (Third Revision) IS 16298 : 2017 6 IS 16298 : 2024 6 June 2024 ISO 6280 : 1981 6 September 2024 ISO 6280 : 2018 Plain Bearings — Plain Bearings — Requirements and Requirements on Backings Guidance on Backings for Thick- for Thick-Walled Multilayer Walled Multilayer Bearings Bearings (First Revision) IS 16764 : 2018 7 IS 16764 : 2024 6 June 2024 ISO 8061 : 2015 6 September 2024 ISO 8061 : 2019 Alpine Ski-Bindings — Alpine Ski-Bindings — Selection of Selection of Release Torque Release Torque Values Values (First Revision) P. RAJESH, Scientist G & DDG (ITS, PRT & TNM) [ADVT.-III/4/Exty./254/2024-25] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research