Date: 2025-05-29Category: Extra OrdinaryState: Union GovernmentCountry: India
In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards
## Policy Analysis Report: Notification Regarding Indian Standards
**1. Executive Summary:**
This report analyzes a notification published by the Bureau of Indian Standards (BIS) regarding the establishment and withdrawal of various Indian Standards. The core purpose of this notification is to update and maintain the relevance of Indian Standards by establishing new standards and concurrently withdrawing older versions. This report finds that the notification encompasses a range of industries, including electrical engineering, air quality monitoring, winding wire manufacturing, surgical implants, and communication cables. Key changes include the adoption of revised standards and the phasing out of older ones.
**2. Introduction:**
The purpose of this report is to provide an informative overview and analysis of a notification from the Bureau of Indian Standards (BIS) concerning the establishment and withdrawal of Indian Standards. This analysis is based solely on the provided text of the notification.
**3. Policy Overview:**
This notification represents an amendment to existing policies and standards related to various products and processes governed by the Bureau of Indian Standards (BIS).
* **Core Objective(s):** Based on the text, the primary objective is to update, revise, and maintain the applicability and relevance of Indian Standards across various sectors. This is achieved by establishing new Indian Standards and subsequently withdrawing outdated or superseded versions.
**4. Background and Rationale:**
This notification serves as an update to existing standards by incorporating technological advancements, safety requirements, and international best practices. This update addresses the need for standards to evolve and improve over time. This specific amendment introduces new standards and revisions in response to developments in relevant fields, ensuring safety, quality, and compatibility.
**5. Key Provisions / Changes:**
This notification focuses specifically on the changes introduced by the amendment text, which establishes new Indian Standards and concurrently withdraws previously existing standards:
* **Specific Parts of the Original Policy Being Changed:** The original policies being changed are the various individual Indian Standards referenced in the "Title of the Indian Standards to be Withdrawn" column. This amendment replaces these earlier versions with the new standards.
* **New Rule/Provision:** The new rule is the official adoption and implementation of the standards listed in the "Title of the Indian Standards Established" column, effective May 23, 2025. It effectively mandates the adoption of the new standards.
* **Difference/Effect:** The effect of these changes is the replacement of older standards with newer, updated versions, which presumably incorporate improvements in design, materials, safety protocols, and/or testing methodologies. The amendment prescribes the simultaneous maintenance of the old and new standards until November 23, 2025, after which the old standards are withdrawn.
Key changes include:
* The implementation of **IS 996 : 2025** for Single Phase a.c. Induction Motors, replacing **IS 996 : 2009**.
* The implementation of **IS 4493 Part 7 : 2025** for Hollow Metallic Waveguides, replacing **IS 4493 Part 7 : 2022**.
* The implementation of **IS 5182 Part 3 : 2025** for Air Pollution Methods, replacing **IS 5182 Part III 1970**.
* The implementation of **IS 9938 : 2025** for Recommended Colours for Insulation, replacing **IS 9938 1981**.
* The implementation of **IS 13730 Part 27Sec 1 : 2025** for Paper Covered Copper CSV Conductors Specification, replacing **IS 7404 Part 1 : 1991**.
* The implementation of **IS 13730 Part 27Sec 2 : 2025** for Paper Covered Aluminium CSV Conductors Specification, replacing **IS 6162 Part I 1971**.
* The implementation of **IS 13730 Part 57 : 2025** for Polyamideimide Enamelled Round Copper Wire, replacing **IS 13730 Part 26 : 1996**.
* The implementation of **IS 19180 : 2025** for NonActive Surgical Implants, replacing **ISISO 21535 : 2007**.
* The implementation of **ISIEC 62807310 : 2023** for FTTA Hybrid Communication Cables.
* The implementation of **ISIEC 632032012 : 2022** for Wearable Electronic Devices and Technologies.
**6. Target Audience and Stakeholders:**
Based on the provided text, the target audience and stakeholders directly affected by these changes include:
* Manufacturers and suppliers of single-phase induction motors.
* Manufacturers and suppliers of hollow metallic waveguides.
* Entities involved in air pollution measurement and monitoring.
* Manufacturers of low-frequency wires and cables.
* Manufacturers of paper-covered copper and aluminium conductors.
* Manufacturers of polyamideimide enamelled round copper wire.
* Manufacturers of non-active surgical implants.
* Manufacturers of FTTA hybrid communication cables.
* Manufacturers of wearable electronic devices and technologies.
* Testing and certification agencies.
* End-users and consumers of the specified products.
**7. Implementation Aspects (Inferred):**
* **Responsible Agency/Bodies:** The Bureau of Indian Standards (BIS) is the responsible agency for implementing and enforcing these standards.
* **Timelines:** The established Indian Standards came into effect on May 23, 2025. The superseded standards will be withdrawn on November 23, 2025. This means that, between May 23, 2025, and November 23, 2025, both standards are acceptable, but after November 23, 2025, only the updated standards will be considered valid.
**8. Expected Outcomes / Impact of Changes:**
The likely intended outcomes of these changes are:
* Improved product quality and performance of equipment and processes conforming to the new standards.
* Enhanced safety standards due to the incorporation of updated safety protocols.
* Better alignment with international best practices in the relevant sectors.
* Increased efficiency and reliability in manufacturing and testing processes.
* Reduction in outdated or substandard products in the market, resulting in improved consumer protection.
**9. Conclusion:**
This notification from the Bureau of Indian Standards (BIS) represents a significant update to Indian Standards across a range of industries. The establishment of new standards and the withdrawal of older versions aim to improve quality, safety, and alignment with international practices. These updates will have a direct impact on manufacturers, suppliers, and consumers, requiring them to adapt to the new requirements within the specified timeframe. The notification ensures that Indian Standards remain relevant and continue to support the growth and competitiveness of various sectors.
Key Entities Referenced
D. L.3300499: Registration Number
29052025263471: Document Identifier
MAY 29, 2025: Date of publication
JYAISTHA 8, 1947: Date in the Indian national calendar
HQPUB01312020PUBBIS 1245: Reference number
THE GAZETTE OF INDIA: Name of the official publication
Bureau of Indian Standards: Organization responsible for setting Indian standards
Bureau of Indian Standards Rules, 2018: Rules governing the Bureau of Indian Standards
Indian Standards: Standards established by the Bureau of Indian Standards
SCHEDULE: A table that describes the Indian standards
IS 996 : 2025: Indian Standard for Single Phase a.c. Induction Motors for General Purpose Fourth Revision
IS 996 : 2009: Indian Standard for Single Phase a.c. Induction Motors for General Purpose Third Revision, being withdrawn
IS 4493 Part 7 : 2025: Indian Standard for Hollow Metallic Waveguides Part 7 Relevant Specifications for Circular Waveguides Second Revision
IS 4493 Part 7 : 2022: Indian Standard for Hollow Metallic Waveguides Part 7 Relevant Specifications for Circular Waveguides First Revision, being withdrawn
IEC 601534 : 2022: International Electrotechnical Commission Standard
IEC 601534 : 2017: International Electrotechnical Commission Standard, being withdrawn
IS 5182 Part 3 : 2025: Indian Standard for Air Pollution Methods for Measurement Air Pollution Part 3 Radioactivity Particulate in Air First Revision
IS 5182 Part III 1970: Indian Standard for Method for Measurement of Radioactivity in Air Particulate in Air, being withdrawn
IS 9938 : 2025: Indian Standard for Recommended Colours for Insulation PVC Insulation for LF Wires for LowFrequency Cables and Cables Wires First Revision
IS 9938 1981: Indian Standard for Standard Colours for Insulation, being withdrawn
IEC 60304 : 1982: International Electrotechnical Commission Standard, being withdrawn
IS 13730 Part 27Sec 1 : 2025: Indian Standard for Paper Covered Copper CSV Conductors Specification for Particular Types Part 1 Round Conductors of Winding Wires First Revision
IS 7404 Part 1 : 1991: Indian Standard for Specification Part 1 Round Conductors, being withdrawn
IEC 60317271 : 2020: International Electrotechnical Commission Standard
AMD 1 : 2024: Amendment 1
IS 13730 Part 27Sec 2 : 2025: Indian Standard for Paper Covered Aluminium CSV Conductors Specification for Particular Types Part I Round Conductors
IS 6162 Part I 1971: Indian Standard for Specification for Particular Types Conductors of Winding Wires Part I Round Conductors, being withdrawn
IEC 60317272 : 2020: International Electrotechnical Commission Standard
IS 13730 Part 57 : 2025: Indian Standard for Specifications for Particular Types of Winding Wires Part 57 Polyamideimide Enamelled Round Copper Wire, Class 220
IS 13730 Part 26 : 1996: Indian Standard for Specification for Particular Types of Winding Wires Part 26 Polyamideimide Enamelled Round Copper Wire, Class 200, being withdrawn
IEC 6031757 : 2010: International Electrotechnical Commission Standard
IEC 31726 1990: International Electrotechnical Commission Standard, being withdrawn
IS 19180 : 2025: Indian Standard for NonActive Surgical Implants Joint Replacement Specific Requirements for HipJoint Replacement Implants
ISISO 21535 : 2007: Indian Standard, being withdrawn
ISO 21535 : 2023: International Organization for Standardization
ISIEC 62807310 : 2023: Indian Standard for Hybrid Communication Cables Part 3 Outdoor Hybrid Cables Section 10 Family Specification for FTTA Hybrid Communication Cables
ISIEC 632032012 : 2022: Indian Standard for Wearable Electronic Devices and Technologies Part 201 Electronic Textile Section 2 Measurement Methods for Basic Properties of Conductive Fabrics and Insulation Materials
Department of Consumer Affairs: The Indian Government Department
New Delhi: Location of Notification
CHITRA GUPTA: Name of Scientist G DDG Hallmarking and Training
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-29052025-263471
xxxGIDHxxx
CG-DL-E-29052025-263471
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण्ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 399] नई दिल्ली, बहृ स्ट्प जतिार, मई 29, 2025/ज्य ेष्ठ 8, 1947
No. 399] NEW DELHI, THURSDAY, MAY 29, 2025/JYAISTHA 8, 1947
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल ेजिभाग)
अजधसचू ना
नई दिल्ली, 27 मई, 2025
सिं भ:भ HQ-PUB013/1/2020-PUB-BIS (1245).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के जििरण
इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ में दिये गये ह,ैं तीसरे स्ट्तभं में इंजगत जतजि को स्ट्िाजपत हो गये ह|ैं चौिे स्ट्तंभ में दिय े
गय े मानकों के जििरण, यदि कोई हो तो ि े भी साि-साि लाग ू रहगें े िब तक ि े पााँचि ें स्ट्तंभ में इंजगत जतजि को िापस जलए
िाने ह|ैं
3498 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
अनसु चू ी
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्िापन भारतीय मानकों, यदि िापस जलए िापस होन ेकी
स.ं जतजि जतजि
िर् भतिा िीर्कभ िान ेह,ैं की सख्ं या, िर् भतिा
िीर्कभ
(1) (2) (3) (4) (5)
1
23 मई 2025
आई एस 996 : 2025 आई एस 996 : 2009 23 निम्बर 2025
सामान्य प्रयोिन के जलए एक फेज़ी ए. सामान्य प्रयोिन के जलए एक
सी. प्रेरण मोटरें (चौिा पुनरीक्षण) फेज़ी ए सी प्रेरण मोटरें
(तीसरा पनु रीक्षण)
2 23 मई 2025 23 निम्बर 2025
आई एस 4493 (भाग 7) : 2025 आई एस 4493 (भाग 7) : 2022
आई ई सी 60153-4 : 2022 आई ई सी 60153-4 : 2017
खोखला धाजिक तंरगपिक खोखला धाजिक तंरगपिक
भाग 7 गोलाकार (चक्करिार) भाग 7 गोलाकार (चक्करिार)
तंरगपिक के जलए संबंजधत जिजिजि तंरगपिक के जलए संबंजधत
(िसू रा पनु रीक्षण) जिजिजि
(पहला पुनरीक्षण)
3 23 मई 2025 23 निम्बर 2025
आई एस 5182 (भाग 3) : 2025 आई एस 5182 (भाग III) –
िायु प्रिर्ू ण — मापने की पद्धजतयााँ 1970
भाग 3 हिा में रेजडयोधर्मभता (कण) िायु प्रिर्ू ण के जलए मापन े की
(पहला पनु रीक्षण) पद्धजत
भाग III हिा में रेजडयोधर्मभता
(कण)
4 23 मई 2025 23 निम्बर 2025
आई एस 9938 : 2025 आई एस 9938 – 1981
आई ई सी 60304 : 1982 एल एफ तारों और केबलों के जलए
पी िी सी इंसुलेिन के जलए
कम आिृजि िाले केबल और तारों के
अनुिंजसत रंग
जलए इन्सलु ेिन के मानक रंग
(पहला पुनरीक्षण)
5 23 मई 2025 23 निम्बर 2025
आई एस 13730 (भाग 27/अनुभाग आई एस 7404 (भाग 1) : 1991
1) : 2025 कागि ढके तांबा चालकों की
जिजिजि
आई ई सी 60317-27-1 : 2020 + ए
भाग 1 गोल चालक
एम डी 1 : 2024 सी एस िी
(पहला पुनरीक्षण)
जििेर् प्रकार की कुंडलण तारों की
जिजिजि
भाग 27 कागज़ टेप से आच्छादित
अनुभाग 1 गोल तांबे के तार[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्िापन भारतीय मानकों, यदि िापस जलए िापस होन ेकी
स.ं जतजि जतजि
िर् भतिा िीर्कभ िान ेह,ैं की सख्ं या, िर् भतिा
िीर्कभ
(1) (2) (3) (4) (5)
6 23 मई 2025 23 निम्बर 2025
आई एस 13730 (भाग 27/अनुभाग आई एस 6162 (भाग I) – 1971
2) : 2025 कागज़-लेजपत एल्यूजमजनयम
कंडक्टसभ के जलए जिजिजि
आई ई सी 60317-27-2 : 2020 + ए
भाग I गोल कंडक्टसभ
एम डी 1 : 2024 सी एस िी
जििेर् प्रकार की कुंडलण तारों की
जिजिजि
भाग 27 कागज़ टेप से आच्छादित
अनुभाग 2 गोल एल्युमीजनयम के तार
7 23 मई 2025 23 निम्बर 2025
आई एस 13730 (भाग 57) : 2025 आई एस 13730 (भाग 26) :
आई ई सी 60317-57 : 2010 + ए 1996
एम डी 1 : 2024 आई ई सी 317-26 (1990)
जििेर् प्रकार की कुंडलण तारों की कुण्डलन तारों के जििेर् प्रकारों
जिजिजि की जिजिजि
भाग 57 पॉजलअमाइड-इमाइड भाग 26 पॉलीएमाईड-इमाईड
एनामेल्ड गोल तांबे का तार, क्लास इनैमलकृत गोल तााँबा के तार िगभ
200
220
8 23 मई 2025 23 निम्बर 2025
आई एस 19180 : 2025 आई एस/आई एस ओ 21535 :
गैर-सदक्रय सर्िभकल प्रत्यारोपण — 2007
संयुक्त प्रजतस्ट्िापन प्रत्यारोपण —
गैर-सदक्रय
कूल्ह-े संयुक्त प्रजतस्ट्िापन प्रत्यारोपण के
िल्यजचदकत्सोपयोगीप्रत्यारोपण
जलए जिजिि अपेक्षाएाँ
— िोड़ प्रजतस्ट्िापन प्रत्यारोपण
(ISO 21535 : 2023; संिोजधत) — कूल्हा-िोड़ प्रजतस्ट्िापन
प्रत्यारोपण के जलए जिजिि
आिश्यकताय ें
9 23 मई 2025
आई एस/आई ई सी 62807-3-10 : लाग ू नहीं लाग ू नहीं
2023
हाइजिड संचार केबल
भाग 3 बाहरी हाइजिड केबल
अनुभाग 10 एफटीटीए हाइजिड संचार
केबल के जलए पाररिाररक जिजिजि4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्िापन भारतीय मानकों, यदि िापस जलए िापस होन ेकी
स.ं जतजि जतजि
िर् भतिा िीर्कभ िान ेह,ैं की सख्ं या, िर् भतिा
िीर्कभ
(1) (2) (3) (4) (5)
10 23 मई 2025
आई एस/आई ई सी 63203-201-2 : लाग ू नहीं लाग ू नहीं
2022
िेरबल इलेक्रोजनक जडिाइसस एिं
टेक्नॉलिीस
भाग 201 इलेक्रॉजनक टेक्सटाइल
अनुभाग 2 चालकीय तांति िस्त्र एिं
ऊष्मारोधक सामजियों के मूलभतू
गुणधम भहते ु मापन पद्धजतया ाँ
जचत्रा गुप् ता, िैज्ञाजनक िी एि ंउप महाजनिेिक (हॉलमार्किंग एि ं रेननंग)
[जिज्ञापन-III/4/असा./132/2025-26]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 27th May, 2025
Ref: HQ-PUB013/1/2020-PUB-BIS (1245).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which
are given in the second column of the schedule hereto annexed have been established on the date indicated against it in
third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force
concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Date of Withdrawal
No. Standards Established Establishment Indian Standards to be
Withdrawn, if any
(1) (2) (3) (4) (5)
23 May 2025
1 IS 996 : 2025 IS 996 : 2009 23 November 2025
Single Phase a.c. Induction Motors Single Phase a.c. Induction
for General Purpose Motors for General Purpose
(Fourth Revision) (Third Revision)
23 May 2025
2 IS 4493 (Part 7) : 2025 IS 4493 (Part 7) : 2022 23 November 2025
IEC 60153-4 : 2022 IEC 60153-4 : 2017[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5
Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Date of Withdrawal
No. Standards Established Establishment Indian Standards to be
Withdrawn, if any
(1) (2) (3) (4) (5)
Hollow Metallic Waveguides Hollow Metallic Waveguides
Part 7 Relevant Specifications for Part 7 Relevant Specifications
Circular Waveguides for Circular Waveguides
(Second Revision) (First Revision)
23 May 2025
3 IS 5182 (Part 3) : 2025 IS 5182 (Part III) – 1970 23 November 2025
Air Pollution — Methods for Method for Measurement of
Measurement Air Pollution
Part 3 Radioactivity (Particulate) Part III Radioactivity
in Air (Particulate) in Air
(First Revision)
23 May 2025
4 IS 9938 : 2025 IS 9938 – 1981 23 November 2025
IEC 60304 : 1982 Recommended Colours for
Standard Colours for Insulation PVC Insulation for LF Wires
for Low-Frequency Cables and and Cables
Wires
(First Revision)
23 May 2025
5 IS 13730 (Part 27/Sec 1) : 2025 IS 7404 (Part 1) : 1991 23 November 2025
IEC 60317-27-1 : 2020 + AMD 1 : Paper Covered Copper
2024 CSV Conductors — Specification
Specification for Particular Types Part 1 Round Conductors
of Winding Wires (First Revision)
Part 27 Paper Tape Covered
Section 1 Round Copper Wire
23 May 2025
6 IS 13730 (Part 27/Sec 2) : 2025 IS 6162 (Part I) – 1971 23 November 2025
IEC 60317-27-2 : 2020 + AMD 1 : Specification for Paper-
2024 CSV Covered Aluminium
Specification for Particular Types Conductors
of Winding Wires Part I Round Conductors
Part 27 Paper Tape Covered
Section 2 Round Aluminium Wire
23 May 2025
7 IS 13730 (Part 57) : 2025 IS 13730 (Part 26) : 1996 23 November 2025
IEC 60317-57 : 2010 + AMD 1 : IEC 317-26 (1990)
2024 Specifications for Particular
Specification for Particular Types Types of Winding Wires
of Winding Wires Part 26 Polyamide-imide
Part 57 Polyamide-imide Enamelled Round Copper
Enamelled Round Copper Wire, Wire, Class 200
Class 220
23 May 2025
8 IS 19180 : 2025 IS/ISO 21535 : 2007 23 November 2025
Non-Active Surgical Implants — Non-Active Surgical Implants
Joint Replacement Implants — — Joint Replacement
Specific Requirements for Hip- Implants — Specific
Joint Replacement Implants Requirements for
(ISO 21535 : 2023, MOD) Hip-Joint Replacement
Implants
23 May 2025
9 IS/IEC 62807-3-10 : 2023 NA NA
Hybrid Communication Cables
Part 3 Outdoor Hybrid Cables
Section 10 Family Specification6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Date of Withdrawal
No. Standards Established Establishment Indian Standards to be
Withdrawn, if any
(1) (2) (3) (4) (5)
for FTTA Hybrid Communication
Cables
23 May 2025
10 IS/IEC 63203-201-2 : 2022 NA NA
Wearable Electronic Devices and
Technologies
Part 201 Electronic Textile
Section 2 Measurement Methods
for Basic Properties of Conductive
Fabrics and Insulation Materials
CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training)
[ADVT.-III/4/Exty./132/2025-26]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.