Home India Bureau of Indian Standards In pursuance of Sub rule 1 of Rule 15 of the Bureau of India...
Date: 17-Mar-2023 Category: Extra Ordinary State: Union Government Country: India

In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards,

Issued by Bureau of Indian Standards · Not Applicable

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

This notification, issued by the Bureau of Indian Standards (BIS), Department of Consumer Affairs on March 14, 2023, announces the establishment of new Indian Standards, effective that date. The notification, reference number HQPUB01312020PUBBIS 550, follows Subrule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018. Specifically, the notification establishes the following standards: 1. **IS 15371 Part 1 : 2023 (ISO 14253-1:2017, 2003, ISO 14253-1:1998):** "Geometrical Product Specifications (GPS) Inspection by Measurement of Workpieces and Measuring Equipment Part 1 Decision Rules for Verifying Conformance or Nonconformity with Specifications". This standard supersedes IS 15371 Part 1, with a withdrawal date of April 14, 2023. 2. **IS 15635 Part 12 : 2023 (ISO 10360-12:2016):** "Geometrical Product Specifications (GPS) Acceptance and Reverification Tests for Coordinate Measuring Systems (CMS) Part 12 Articulated Arm Coordinate Measurement Machines (CMM)". 3. **IS 18174 : 2023:** "Polyether Polyols Specification". For further information, contact P. Rajesh, Scientist F DDG ITS, PRT TNM. The notification was uploaded by the Directorate of Printing at the Government of India Press, Ring Road, Mayapuri, New Delhi and published by the Controller of Publications, Delhi.

Key Entities Referenced

Bureau of Indian Standards: An organization responsible for setting and maintaining Indian standards. Department of Consumer Affairs: A department of the Indian government under which the Bureau of Indian Standards operates. New Delhi: The location where the notification was issued. Bureau of Indian Standards Rules, 2018: The set of rules governing the operation and procedures of the Bureau of Indian Standards. Indian Standards: Standards established and maintained by the Bureau of Indian Standards. ISO 142531: An international standard for geometrical product specifications. ISO 1036012: An international standard for geometrical product specifications relating to coordinate measuring systems. IS 15371: Indian standards related to Geometrical Product Specifications
Official Source Record View Original Source →
See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99 xxxGIDHxxx सी.जी.-डी.एxलxx.-GअID.-E1x7x0x 32023-244441 CG-DL-E-17032023-244441 असाधारण EXTRAORDINARY भाग III—खण् ड 4 PART III—Section 4 प्राजधकार स ेप्रकाजित PUBLISHED BY AUTHORITY स.ं 174] नई दिल्ली, िुक्र ार, माचच 17, 2023/फाल्ग नु 26, 1944 No. 174] NEW DELHI, FRIDAY, MARCH 17, 2023/PHALGUNA 26, 1944 भारतीय मानक ब्य रू (उपभ क्त ा मामल ेज भाग) अजधसचू ना नई दिल्ली, 14 माच,च 2023 सिं भ:च HQ-PUB013/1/2020-PUB-BIS (550).—भारतीय मानक ब्यूर जनयम, 2018 के जनयम 15 के उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूर एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के ज रण इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ में दिय े गय े ह,ैं तीसरे स्ट्तभं में इंजगत जतजि क स्ट्िाजपत ह गये ह ैं । चौि े स्ट्तंभ म ें दिय े गय े मानकों के ज रण, यदि क ई ह त े भी साि-साि लाग ू रहगें े िब तक े पााँच ें स्ट्तंभ में इंजगत जतजि क ापस जलए िाने ह ैं । अनसु चू ी क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि ापस ापस ह न े स.ं की जतजि र् चतिा िीर्कच जलए िान ेह,ैं की सख्ं या, र् च तिा िीर्कच (1) (2) (3) (4) (5) 1 आई एस 15371 (भाग 1) : 2023/आई 14 माचच 2023 आई एस 15371 (भाग 1) : 14 अप्रलै 2023 एस ओ 14253-1 : 2017 2003/आई एस ओ 14253- 1759 GI/2023 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] ज्याजमतीय उत्पाि ज जिजि 1 : 1998 (िी.पी.एस.) — काय च खंड और मापन ज्याजमतीय उत्पाि ज जिजियााँ उपकरण का माप द्वारा जनरीक्षण (िी.पी.एस.) — कचपीस के भाग 1 ज जिजि के साि अनरूु पता या मापन द्वारा जनरीक्षण तिा गैर-अनुरूपता सत्याजपत करन ेके जलए मापक उपस्ट्कर जनणचय जनयम भाग 1 ज जिजि अनुसार (पहला पुनरीक्षण) अनुरूप ह न े या अनुरूप न ह ने के जनणचय जनयम 2 आई एस 15635 (भाग 12) : 14 माचच 2023 लाग ू नहीं लाग ू नहीं 2023/आई एस ओ 10360-12 : 2016 ज्याजमतीय उत्पाि ज जिजि (िी.पी.एस.) — संय िी मापन प्रणाली (सी.एम.एस.) की स्ट् ीकायचता और पुनिाांच परीक्षण भाग 12 संजधत भुिा ाल ेसंय िी मापन मिीन (सी.एम.एम.) 3 आई एस 18174 : 2023 14 माचच 2023 लाग ू नहीं लाग ू नहीं पॉजलिर प जलओल्स — ज जिजि पी. रािेि, ैज्ञाजनक एफ ए ं उप महाजनिेिक (आई टी एस, पी आर टी & टी एन एम) [ज ज्ञापन-III/4/असा./700/2022-23] BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 14th March, 2023 Ref: HQ-PUB013/1/2020-PUB-BIS (550).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column. SCHEDULE Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Date of No. Standards Established Establishment Indian Standards to be withdrawal withdrawn, if any (1) (2) (3) (4) (5) 1 IS 15371 (Part 1) : 2023/ISO 14253-1 : 14 March 2023 IS 15371 (Part 1) : 14 April 2023 2017 2003/ISO 14253-1 : 1998 Geometrical Product Specifications Geometrical Product (GPS) — Inspection by Measurement of Specifications (GPS) — Workpieces and Measuring Equipment Inspection by Measurement Part 1 Decision Rules for Verifying of Workpieces and[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3 Conformity or Nonconformity with Measuring Equipment Specifications Part 1 Decision Rules for (First Revision) Providing Conformance or Non-Conformance with Specifications 2 IS 15635 (Part 12) : 2023/ISO 10360-12 14 March 2023 NA NA : 2016 Geometrical Product Specifications (GPS) — Acceptance and Reverification Tests for Coordinate Measuring Systems (CMS) Part 12 Articulated Arm Coordinate Measurement Machines (CMM) 3 IS 18174 : 2023 14 March 2023 NA NA Polyether Polyols — Specification P. RAJESH, Scientist F & DDG (ITS, PRT & TNM) [ADVT.-III/4/Exty./700/2022-23] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research