Date: 2025-05-06Category: Extra OrdinaryState: Union GovernmentCountry: India
In pursuance of Sub rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards
## Policy Analysis Report: Notification Regarding Indian Standards (May 6, 2025)
**1. Executive Summary:**
This report analyzes a notification published by the Bureau of Indian Standards (BIS) on May 6, 2025, concerning the establishment and withdrawal of several Indian Standards. This notification acts as an amendment to existing standards by either establishing new revisions or reaffirming older standards for a limited time before withdrawal. The core purpose is to update and maintain relevant standards for various materials, products, and testing methods across different industries. The key findings indicate a broad update across industries, focusing on alignment with international standards and revisions based on technological advancements or practical experience. This report highlights the specific changes enacted and the implications for affected stakeholders.
**2. Introduction:**
This report aims to provide a comprehensive overview of the notification issued by the Bureau of Indian Standards (BIS) on May 6, 2025, as published in *The Gazette of India*. The analysis is based solely on the provided text of the notification and aims to inform the affected industry about the modifications to Indian Standards and their potential impact.
**3. Policy Overview:**
This notification acts as an amendment to existing Indian Standards.
* **Core Objective(s):**
* Establish updated Indian Standards across various sectors, including materials, testing methods, and product specifications.
* Withdraw outdated standards, ensuring consistency and relevance.
* Align Indian Standards with current international standards (ISO), as inferred from the document.
**4. Background and Rationale:**
This notification represents an amendment to previously established standards. The reason for these specific amendments is to update standards to reflect technological advancements, practical experience gained in their application, and alignment with international standards (ISO) where applicable. The frequency of revisions suggests a commitment to keeping standards current and relevant to industry needs and global practices. The updates likely aim to improve product quality, safety, and efficiency while facilitating international trade.
**5. Key Provisions / Changes:**
This notification details changes to Indian Standards. The key provisions involve:
* **Establishment of New Revisions:** The notification establishes new revisions for numerous Indian Standards. Each entry in the schedule specifies:
* **"Sl No., Year Title of the Indian Standards Established":** This indicates the subject matter of the standard, like "Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils Specification" (IS 21 : 2025). The year indicates the year the standard was established/revised.
* **"Date of Establishment":** This specifies the date the new standard comes into effect (April 30, 2025).
* **Withdrawal of Existing Standards:** Concurrently, older versions of the same standards are marked for withdrawal:
* **"No., Year Title of the Indian Standards to be Withdrawn, if any":** This references the superseded standard, e.g., "IS 21 1992."
* **"Date of Withdrawal":** This specifies the date when the older standard will no longer be in force (October 30, 2025).
* **Alignment with International Standards (ISO):** Several entries show alignment with ISO standards, which indicates that these revisions bring Indian standards in line with international best practices (e.g., ISO 4033, ISO 65071, ISO 65082).
* **Specific examples of changes based on the Title of the Standard:**
* For "Wrought Aluminium and Wrought Aluminium Alloys for Manufacture of Utensils Specification," the standard moves from the Fourth Revision (IS 21 1992) to the Fifth Revision (IS 21 : 2025), likely reflecting updates in manufacturing processes, material compositions, or safety requirements.
* For "Methods of Chemical Analysis of Bronzes," various parts are updated, indicating advancements in chemical analysis techniques and equipment.
The *effect* of these changes is that manufacturers and other stakeholders must adopt the new standards by October 30, 2025, to ensure compliance. Failure to comply may result in penalties or rejection of products that do not meet the revised specifications.
**6. Target Audience and Stakeholders:**
Based on the diverse range of standards listed, the target audience and stakeholders include:
* Manufacturers of aluminium products, fasteners, textiles, building materials (like limes and clay products), agricultural equipment, and other engineering products.
* Testing laboratories and quality control agencies involved in materials testing (e.g., metallic materials hardness testing).
* Chemical analysis laboratories dealing with quartzite, ferrosilicon, and bronzes.
* Civil engineers and construction companies using building limes and clay products.
* Agricultural sector, including manufacturers and users of tractors and harvesting machines.
* Nanotechnology researchers and manufacturers.
* Textile Industry
* Food Industry
* Any industry or organization that relies on Bureau of Indian Standards.
**7. Implementation Aspects (Inferred):**
* **Responsible agency/bodies:** The Bureau of Indian Standards (BIS) is the responsible body for implementing and enforcing these standards.
* **Timelines:** A clear timeline is provided: The new standards are established on April 30, 2025, and the old standards are withdrawn on October 30, 2025. This implies a six-month transition period for stakeholders to adapt to the new standards.
* **Procedures:** While the document doesn't explicitly detail procedures, it can be inferred that BIS will likely conduct audits and inspections to ensure compliance with the revised standards. Manufacturers may need to update their production processes, testing protocols, and documentation to meet the new requirements.
**8. Expected Outcomes / Impact of Changes:**
The intended outcome of these changes is to:
* Improve the quality and reliability of products and services covered by the standards.
* Enhance safety in manufacturing and application of various materials and products.
* Promote harmonization with international standards, facilitating trade and collaboration.
* Drive innovation and technological advancements by incorporating the latest best practices into the standards.
* Ensure fair trade practices
* Boost Industry standards
* Protect the environment by mandating eco-friendly methods and practices
The potential impact of the amendments includes:
* Increased costs for manufacturers who need to upgrade their equipment or processes to comply with the new standards.
* Improved competitiveness for manufacturers who successfully adopt the new standards and produce higher-quality products.
* Enhanced consumer confidence in products that meet the revised Indian Standards.
**9. Conclusion:**
The notification issued by the Bureau of Indian Standards represents a significant update to a range of Indian Standards. These amendments reflect the ongoing effort to maintain relevant, high-quality standards across various industries. Stakeholders must familiarize themselves with the specific changes affecting their operations and take necessary steps to ensure compliance by the October 30, 2025 deadline. The revisions are likely to lead to improved product quality, enhanced safety, and greater alignment with international standards, ultimately benefiting both manufacturers and consumers.
Key Entities Referenced
MAY 6, 2025: Date of the Gazette publication.
Department of Consumer Affairs: The department under which the Bureau of Indian Standards operates.
April, 2025: Date of notification regarding Indian Standards.
HQPUB01312020PUBBIS 1222: Reference number related to the notification.
Bureau of Indian Standards Rules, 2018: Governing rules for the Bureau of Indian Standards.
Indian Standards: Standards established and notified by the Bureau of Indian Standards.
Sl No.: Serial Number.
Year: Year of publication of the standard.
Standards Established: Column heading indicating the established standards.
Establishment: Column heading indicating the establishment date.
Standards to be Withdrawn: Column heading indicating the standards to be withdrawn.
Withdrawal: Column heading indicating the withdrawal date.
October: Date of withdrawal for standards.
ISO: International Organization for Standardization
NEW DELHI: Location where the notification was issued.
INDIA: The Gazette of INDIA
VAISAKHA 16, 1947: Date in the Indian national calendar.
THE GAZETTE OF INDIA: Title of the official government publication.
Bureau of Indian Standards: Organization responsible for setting Indian standards.
CHITRA GUPTA: Name of the Scientist G
Scientist G: Title of the Scientist
DDG Hallmarking and Training: Designation of the person.
Dte. of Printing: Directorate of Printing.
Government of India Press: Printing press of the Government of India.
Ring Road, Mayapuri, New Delhi110064: Address of the Government of India Press.
Controller of Publications, Delhi110054: Publisher of the Gazette.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
ससीी..जजीी..--डडीी..एएलल..--अअ..--0088005522002255--226622997777
xxxGIDHxxx
CCGG--DDLL--EE--0088005522002255--226622997777
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 352] नई दिल्ली, मगं लिार, मई 6, 2025/ििै ाख 16, 1947
No. 352] NEW DELHI, TUESDAY, MAY 6, 2025/VAISAKHA 16, 1947
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल े जिभाग)
अजधसचू ना
नई दिल्ली, 30 अप्रलै , 2025
सिं भ:भ HQ-PUB013/1/2020-PUB-BIS (1222).––भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण में भारतीय मानक ब्यरू ो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के जििरण
इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ में दिय े गय े हैं, तीसरे स्ट्तभं में इंजगत जतजि को स्ट्िाजपत हो गये हैं| चौि े स्ट्तंभ में दिय े
गये मानकों के जििरण, यदि कोई हो तो िे भी साि-साि लाग ूरहगें ेिब तक िे पााँचिें स्ट्तंभ में इंजगत जतजि को िापस जलए
िाने ह|ैं
3000 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
अनसु चू ी
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन भारतीय मानकों, यदि िापस िापस होन े की
स.ं तिा िीर्कभ जतजि जलए िान ेह,ैं की सख्ं या, िर् भ जतजि
तिा िीर्कभ
(1) (2) (3) (4) (5)
1 आई एस 21 : 2025 30 अप्रलै आई एस 21 – 1992 30 अक्टूबर
बतभन जनमाभण के जलए जपटिााँ 2025 बतभन जनमाभण के जलए जपटिााँ 2025
एल्युजमजनयम और एल्युजमजनयम ऐल्युजमजनयम और ऐल्युजमजनयम-
जमश्रधातुए ाँ ― जिजिजि जमश्रधातुए ाँ ― जिजिजि
(पााँचिां पुनरीक्षण) (चौिा पनु रीक्षण)
2 आई एस 1364 (भाग 6) : 2025 30 अप्रलै आई एस 1364 (भाग 6) : 30 अक्टूबर
आई एस ओ 4033 : 2023 2025 2018 2025
उत्पाि ग्रेड ए और बी के जलए र्ट्कोणीय आई एस ओ 4033 : 2012
िीर्भ िाले काबल,े पेंच और दिबररयााँ उत्पाि ग्रेड ए और बी के जलए
भाग 6 र्ट्कोणीय दिबररयााँ, िलै ी 2 र्टकोणीय िीर्भ िाल ेकाबले,
(साइज़ रेंि एम 5 से एम 39 तक) पेंच और दिबररया ाँ
(िसू रा पनु रीक्षण) भाग 6 िैली 2 की र्टकोणी
दिबररयााँ
(पहला पुनरीक्षण)
3 आई एस 1501 (भाग 1) : 2025 30 अप्रलै आई एस 1501 (भाग 1) : 30 अक्टूबर
आई एस ओ 6507-1 : 2023 2025 2020 2025
धाजत्िक सामग्री — जिकसभ कठोरता आई एस ओ 6507-1 : 2018
परीक्षण धाजत्िक सामग्री — जिकसभ
भाग 1 परीक्षण पद्धजत कठोरता परीक्षण
(छठा पुनरीक्षण) भाग 1 परीक्षण की पद्धजत
(पांचिां पुनरीक्षण)
4 आई एस 1559 (भाग 3) : 2025 30 अप्रलै आई एस 1559 (भाग III) – 30 अक्टूबर
फेरोजसजलकॉन की रासायजनक जिश्लेर्ण 2025 1982 2025
पद्धजतयााँ भाग 3 सल्फर ज्ञात करना फेरोजसजलकॉन की रासायजनक
(िसू रा पनु रीक्षण) जिश्लेर्ण पद्धजतया ाँ
भाग III सल्फर ज्ञात करना
(पहला पुनरीक्षण)
5 आई एस 1586 (भाग 2) : 2025 30 अप्रलै आई एस 1586 (भाग 2) : 30 अक्टूबर
आई एस ओ 6508-2 : 2023 2025 2018 2025
धाजत्िक सामग्री — रॉकिेल कठोरता आई एस ओ 6508-2 : 2015
परीक्षण धाजत्िक सामग्री — रॉकिेल
भाग 2 परीक्षण मिीनों और इंडेंटसभ का कठोरता परीक्षण
सत्यापन एिं अंििोधन भाग 2 परीक्षण मिीनों और
(छठा पुनरीक्षण) इंडेंटसभ के सत्यापन एिं
अंििोधन
(पााँचिा पुनरीक्षण)
6 आई एस 1586 (भाग 3) : 2025 30 अप्रलै आई एस 1586 (भाग 3) : 30 अक्टूबर
आई एस ओ 6508-3 : 2023 2025 2018 2025
धाजत्िक सामग्री — रॉकिेल कठोरता आई एस ओ 6508-3 : 2015
परीक्षण धाजत्िक सामग्री — रॉकिेल
भाग 3 संिभ भखण्डों का अिं िोधन कठोरता परीक्षण[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन भारतीय मानकों, यदि िापस िापस होन े की
स.ं तिा िीर्कभ जतजि जलए िान ेह,ैं की सख्ं या, िर् भ जतजि
तिा िीर्कभ
(1) (2) (3) (4) (5)
(छठा पुनरीक्षण) भाग 3 संिभ भ ब्लाक का
अंििोधन
(पााँचिा पुनरीक्षण)
7 आई एस 1917 (भाग 3) : 2025 30 अप्रलै आई एस 1917 (भाग 3) : 30 अक्टूबर
क्वाटभज़ाइट और उच्च जसजलका रेत का 2025 1992 2025
रासायजनक जिश्लेर्ण उच्चजसजलका बालू एिं क्वारभिाइट
भाग 3 जसजलका ज्ञात करना का रासायजनक जिश्लेर्ण
(िसू रा पनु रीक्षण) भाग 3 जसजलका ज्ञात करना
(पहला पुनरीक्षण)
8 आई एस 1921 : 2025 30 अप्रलै आई एस 1921 : 2005 30 अक्टूबर
टााँका तार — ठोस और फ्लक्स कोडभ — 2025 फ्लक्स कोडभ टााँका तार — 2025
जिजिजि (तीसरा पुनरीक्षण) जिजिजि
(िसू रा पनु रीक्षण)
9 आई एस 2131 : 2025 30 अप्रलै आई एस 2131 – 1981 30 अक्टूबर
मृिा का मानक भेिन परीक्षण — 2025 मृिा का मानक भेिन परीक्षण के 2025
परीक्षण पद्धजत जलए पद्धजत
(िसू रा पनु रीक्षण) (पहला पुनरीक्षण)
10 आई एस 2248 : 2025 30 अप्रलै आई एस 2248 : 1992 30 अक्टूबर
भिनों के जलए जमट्टी के उत्पाि — 2025 भिन के जलए जमट्टी उत्पाि 2025
पाररभाजर्क िब्िािली संबंधी पाररभाजर्क िब्िािली
(तीसरा पनु रीक्षण) (िसू रा पनु रीक्षण)
11 आई एस 2518 : 2025 30 अप्रलै आई एस 2518 – 1964 30 अक्टूबर
िस्त्रादि — ऊन के होज़री धाग ेऔर 2025 ऊन के होज़री धागे और सामान 2025
सामान की पैकेजिंग — रीजत संजहता की पैकेजिंग के जलए कोड
(पहला पुनरीक्षण)
12 आई एस 3086 : 2025 30 अप्रलै आई एस 3086 – 1965 30 अक्टूबर
िस्त्रादि — कपास के होज़री धागे और 2025 कपास के होज़री धागे और 2025
सामान की समुद्र-योग्य पैकेजिंग — रीजत सामान की समुद्र-योग्य पैकेजिंग
संजहता के जलए कोड
(पहला पुनरीक्षण)
13 आई एस 4027 (भाग 3) : 2025 30 अप्रलै आई एस 4027 (भाग 3) – 30 अक्टूबर
कााँसे की रासायजनक जिश्लेर्ण पद्धजतयााँ 2025 1987 2025
भाग 3 आयतनात्मक पद्धजत द्वारा कााँसे के रासायजनक जिश्लेर्ण की
फॉस्ट्फोरस ज्ञात करना पद्धजतयााँ
(िसू रा पनु रीक्षण) भाग 3 आयतनात्मक पद्धजत —
फॉस्ट्फोरस ज्ञात करना
(पहला पुनरीक्षण)
14 आई एस 4027 (भाग 5) : 2025 30 अप्रलै आई एस 4027 (भाग 5) – 30 अक्टूबर
कााँसे की रासायजनक जिश्लेर्ण पद्धजतयााँ 2025 1987 2025
भाग 5 आयोजडमेररक पद्धजत द्वारा रटन कााँसे के रासायजनक जिश्लेर्ण की
ज्ञात करना पद्धजतयााँ
(िसू रा पनु रीक्षण) भाग 5 आयोजडमेररक पद्धजत-4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन भारतीय मानकों, यदि िापस िापस होन े की
स.ं तिा िीर्कभ जतजि जलए िान ेह,ैं की सख्ं या, िर् भ जतजि
तिा िीर्कभ
(1) (2) (3) (4) (5)
रटन ज्ञात करना
(पहला पुनरीक्षण)
15 आई एस 4027 (भाग 7) : 2025 30 अप्रलै आई एस 4027 (भाग 7) : 30 अक्टूबर
कााँसे की रासायजनक जिश्लेर्ण पद्धजतयााँ 2025 1990 2025
भाग 7 रोडामाइन बी स्ट्पेक्रोफोटोमेररक कााँसे के रसायजनक जिश्लेर्ण की
पद्धजत द्वारा एंटीमनी ज्ञात करना पद्धजतयााँ
(िसू रा पनु रीक्षण) भाग 7 रोडामाइन बी स्ट्पेक्रम
प्रकािजमजत पद्धजत द्वारा
ऐन्टीमनी ज्ञात करना
(पहला पुनरीक्षण)
16 आई एस 4027 (भाग 9) : 2025 30 अप्रलै आई एस 4027 (भाग 9) : 30 अक्टूबर
कााँसे की रासायजनक जिश्लेर्ण पद्धजतयााँ 2025 1991 2025
भाग 9 परमाण ु अििोर्ण स्ट्पेक्रोमेररक कांसे के रासायजनक जिश्लेर्ण की
पद्धजत द्वारा एल्युजमजनयम ज्ञात करना पद्धजतयााँ
(िसू रा पनु रीक्षण) भाग 9 परमाण्िीय अििोर्ण
स्ट्पेक्रोमीटरी पद्धजत द्वारा
ऐल्यमु ीजनयम ज्ञात करना
(पहला पुनरीक्षण)
17 आई एस 6024 : 2025 30 अप्रलै आई एस 6024 – 1983 30 अक्टूबर
हािेजस्ट्टंग मिीनों के जलए गार्डसभ — 2025 हािेजस्ट्टंग मिीनों के जलए गार्डसभ 2025
जिजिजि के जलए जिजिजि
( िसू रा पुनरीक्षण) (पहला पुनरीक्षण)
18 आई एस 6226 (भाग 1) : 2025 30 अप्रलै आई एस 6226 (भाग 1) : 30 अक्टूबर
धातुओं के रासायजनक जिश्लेर्ण के जलए 2025 1994 2025
उपकरणों की अनुिंसाए ाँ धातु के रासायजनक जिश्लेर्ण के
भाग 1 प्रत्यक्ष िहन द्वारा काबभन ज्ञात जलए उपकरणों की जसफाररि ें
करने के उपकरण भाग 1 प्रत्यक्ष िहन द्वारा काबभन
(िसू रा पनु रीक्षण) ज्ञात करन े के उपकरण
(पहला पुनरीक्षण)
19 आई एस 6751 : 2025 30 अप्रलै आई एस 6751 – 1972 30 अक्टूबर
जबयररंग्स के जलए एल्युजमजनयम 2025 जबयररंग्स के जलए एल्युजमजनयम 2025
जमश्रधातु िलाई और पजियााँ — जिजिजि जमश्रधातु िलाई और पजियों के
(पहला पुनरीक्षण) जलए जिजिजि
20 30 अप्रलै 30 अक्टूबर
आई एस 6932 (भाग 1) : 2025 2025 आई एस 6932 (भाग 1) – 2025
जबजल्डंग लाइम्स — परीक्षण पद्धजत 1973
भाग 1 तनु अम्ल और क्षार में जबजल्डंग लाइम्स के जलए परीक्षण
अघलु निील अििेर्, प्रज्िलन पर हाजन, पद्धजतयााँ
हाइड्रोक्लोररक एजसड में अघलु निील भाग 1 अघलु निील अििेर्,
अििेर्, जसजलकॉन डाइऑक्साइड, प्रज्िलन पर हाजन, अघलु निील
फेररक एिं एल्यूमीजनयम ऑक्साइड, पिािभ, जसजलकॉन डाइऑक्साइड,[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन भारतीय मानकों, यदि िापस िापस होन े की
स.ं तिा िीर्कभ जतजि जलए िान ेह,ैं की सख्ं या, िर् भ जतजि
तिा िीर्कभ
(1) (2) (3) (4) (5)
कैजल्ियम ऑक्साइड और मैग्नीजियम फेररक एिं एल्यूमीजनयम
ऑक्साइड ज्ञात करना (पहला ऑक्साइड, कैजल्ियम ऑक्साइड
पुनरीक्षण) और मैग्नीजियम ऑक्साइड ज्ञात
करना
21 आई एस 6932 (भाग 2) : 2025 30 अप्रलै आई एस 6932 (भाग II) – 30 अक्टूबर
जबजल्डंग लाइम्स — परीक्षण पद्धजत 2025 1973 2025
भाग 2 काबभन डाइऑक्साइड की मात्रा जबजल्डंग लाइम्स के जलए परीक्षण
ज्ञात करना (पहला पुनरीक्षण) पद्धजतयााँ
भाग II काबभन डाइऑक्साइड की
मात्रा ज्ञात करना
22 आई एस 6932 (भाग 3) : 2025 30 अप्रलै आई एस 6932 (भाग III) – 30 अक्टूबर
जबजल्डंग लाइम्स — परीक्षण पद्धजत 2025 1973 2025
भाग 3 अनबुझे चून े के चनू ािमन पर जबजल्डंग लाइम्स के जलए परीक्षण
अििेर् ज्ञात करना पद्धजत
(पहला पुनरीक्षण) भाग III अनबुझे चनू े के
चूनािमन पर अििेर् ज्ञात
करना
23 आई एस 6932 (भाग 4) : 2025 30 अप्रलै आई एस 6932 (भाग IV) – 30 अक्टूबर
जबजल्डंग लाइम्स — परीक्षण पद्धजत 2025 1973 2025
भाग 4 बुझे चनू े की बारीकी ज्ञात करना जबजल्डंग लाइम्स के जलए परीक्षण
(पहला पुनरीक्षण) पद्धजतयााँ
भाग IV बुझे चून े की बारीकी
ज्ञात करना
24 आई एस 6932 (भाग 5) : 2025 30 अप्रलै आई एस 6932 (भाग V) – 30 अक्टूबर
जबजल्डंग लाइम्स — परीक्षण पद्धजत 2025 1973 2025
भाग 5 जनिभजलत ऑक्साइड ज्ञात करना जबजल्डंग लाइम्स के जलए परीक्षण
(पहला पुनरीक्षण) पद्धजतयााँ
भाग V जनिभजलत ऑक्साइड
ज्ञात करना
25 आई एस 6932 (भाग 6) : 2025 30 अप्रलै आई एस 6932 (भाग VI) – 30 अक्टूबर
जबजल्डंग लाइम्स — परीक्षण पद्धजत 2025 1973 2025
भाग 6 अनबुझे चून े की आयतन प्राजि जबजल्डंग लाइम्स के जलए परीक्षण
ज्ञात करना (पहला पुनरीक्षण) पद्धजतयााँ
भाग VI अनबुझे चून े की आयतन
प्राजि ज्ञात करना
26 आई एस 6932 (भाग 7) : 2025 30 अप्रलै आई एस 6932 (भाग VII) – 30 अक्टूबर
जबजल्डंग लाइम्स — परीक्षण पद्धजत 2025 1973 2025
भाग 7 संपीड़न और अनुप्रस्ट्ि िजि ज्ञात जबजल्डंग लाइम्स के जलए परीक्षण
करना (पहला पुनरीक्षण) पद्धजतयााँ
भाग VII संपीड़न और अनुप्रस्ट्ि
िजि ज्ञात करना
27 30 अप्रलै 30 अक्टूबर
आई एस 6932 (भाग 8) : 2025 2025 आई एस 6932 (भाग VIII) – 20256 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन भारतीय मानकों, यदि िापस िापस होन े की
स.ं तिा िीर्कभ जतजि जलए िान ेह,ैं की सख्ं या, िर् भ जतजि
तिा िीर्कभ
(1) (2) (3) (4) (5)
जबजल्डंग लाइम्स — परीक्षण पद्धजत 1973
भाग 8 सुकायभता ज्ञात करना जबजल्डंग लाइम्स के जलए परीक्षण
(पहला पुनरीक्षण) पद्धजतयााँ
भाग VIII सुकायभता ज्ञात करना
28 आई एस 6932 (भाग 9) : 2025 30 अप्रलै आई एस 6932 (भाग IX) – 30 अक्टूबर
जबजल्डंग लाइम्स — परीक्षण पद्धजत 2025 1973 2025
भाग 9 साउंडनेस ज्ञात करना जबजल्डंग लाइम्स के जलए परीक्षण
(पहला पुनरीक्षण) पद्धजतयााँ
भाग IX साउंडनेस ज्ञात करना
29 आई एस 6932 (भाग 10) : 2025 30 अप्रलै आई एस 6932 (भाग X) – 30 अक्टूबर
जबजल्डंग लाइम्स — परीक्षण पद्धजत 2025 1973 2025
भाग 10 बुझे चनू े का पॉजपगं और जपरटंग जबजल्डंग लाइम्स के जलए परीक्षण
ज्ञात करना (पहला पुनरीक्षण ) पद्धजतयााँ
भाग X बुझे चून े का पॉजपंग और
जपरटंग ज्ञात करना
30 आई एस 6932 (भाग 11) : 2025 30 अप्रलै आई एस 6932 (भाग 11) – 30 अक्टूबर
जबजल्डंग लाइम्स — परीक्षण पद्धजत 2025 1983 2025
भाग 11 बुझे चनू े का जस्ट्िरण काल ज्ञात जबजल्डंग लाइम्स के जलए परीक्षण
करना पद्धजतयााँ
(पहला पुनरीक्षण) भाग 11 बुझे चनू े का जस्ट्िरण
काल ज्ञात करना
31 आई एस 10054 : 2025 30 अप्रलै आई एस 10054 : 1996 30 अक्टूबर
िस्त्रादि — उच्च घनत्ि पॉलीइिलीन 2025 िस्त्रादि — उच्च घनत्ि 2025
मोनोदफलामेंट (एचडीपीई) एकतंतु के पोलीइिलीन मोनोदफलामेंट का
गोल िाली िाली मच्छरिानी का कपड़ा गोल िाली का मच्छरिानी का
— जिजिजि कपड़ा — जिजिजि
(िसू रा पनु रीक्षण) (पहला पुनरीक्षण)
32 आई एस 11033 : 2025 30 अप्रलै आई एस 11033 – 1984 30 अक्टूबर
ररिर प्रकार पि ु द्वारा चाजलत आल ू 2025 पिु द्वारा चाजलत आलू खोिन े 2025
खोिने िाला यंत्र — जिजिजि िाला यंत्र, ररिर प्रकार के जलए
(पहला पुनरीक्षण) जिजिजि
33 आई एस 12182 : 2025 30 अप्रलै आई एस 12182 – 1987 30 अक्टूबर
िलाियों की योिना और जनष्पािन में 2025 िलाियों की योिना और 2025
अिसािन के प्रभािों को ज्ञात करना — जनष्पािन में अिसािन के प्रभािों
दििाजनिेि को ज्ञात करने के जलए
(पहला पनरीक्षण) दििाजनिेि
34 आई एस 12308 (भाग 1) : 2025 30 अप्रलै आई एस 12308 (भाग 1) – 30 अक्टूबर
िलिााँ लोह ेऔर कच्च ेलोह ेकी 2025 1987 2025
रासायजनक जिश्लेर्ण पद्धजतया ाँ िलिााँ लोह ेऔर कच्च ेलोह ेकी
भाग 1 तापीय चालकता पद्धजत द्वारा रासायजनक जिश्लेर्ण पद्धजतया ाँ[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 7
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन भारतीय मानकों, यदि िापस िापस होन े की
स.ं तिा िीर्कभ जतजि जलए िान ेह,ैं की सख्ं या, िर् भ जतजि
तिा िीर्कभ
(1) (2) (3) (4) (5)
कुल काबभन ज्ञात करना (1.00 प्रजतित स े भाग 1 तापीय चालकता पद्धजत
4.50 प्रजतित काबभन के जलए) द्वारा कुल काबभन ज्ञात करना
(पहला पुनरीक्षण) (1.00 स े 4.50 प्रजतित काबभन
के जलए)
35 आई एस 12308 (भाग 11) : 2025 30 अप्रलै आई एस 12308 (भाग 11) : 30 अक्टूबर
िलिााँ लोह ेऔर कच्च ेलोह े की 2025 1991 2025
रासायजनक जिश्लेर्ण पद्धजतया ाँ िलिााँ लोह ेएिं कच्चे लोह ेके
भाग 11 प्रत्यक्ष िहन आयतनी पद्धजत रासायजनक जिश्लेर्ण की
द्वारा कुल काबभन ज्ञात करना पद्धजतयााँ
(1.50 प्रजतित से 4.50 प्रजतित काबभन भाग 11 प्रत्यक्ष िहन आयतनी
के जलए) (पहला पुनरीक्षण) पद्धजत द्वारा कुल काबभन ज्ञात
करना
(1.50 स े 4.50 प्रजतित काबभन
के जलए)
36 आई एस 12308 (भाग 12) : 2025 30 अप्रलै आई एस 12308 (भाग 12) : 30 अक्टूबर
िलिााँ लोह ेऔर कच्च ेलोह े की 2025 1992 2025
रासायजनक जिश्लेर्ण पद्धजतया ाँ कच्चे अििा िलिााँ लोह े के
भाग 12 परमाण ु अििोर्ण रासायजनक जिश्लेर्ण की
स्ट्पेक्रोमेररक पद्धजत द्वारा तााँबा ज्ञात पद्धजतयााँ
करना भाग 12 परमाण्िीय अििोर्ण
(0.01 प्रजतित से 0.5 प्रजतित तााँबा के स्ट्पेक्रोमीटरी पद्धजत द्वारा तााँबा
जलए) ज्ञात करना
(पहला पुनरीक्षण) (0.01 स े 0.5 प्रजतित तााँबा के
जलए)
37 आई एस 12363 : 2025 30 अप्रलै आई एस 12363 – 1988 30 अक्टूबर
कृजर् रैक्टरों की रैक चौड़ाई — 2025 कृजर् रैक्टरों की रैक चौड़ाई के 2025
अनुिंसाए ाँ जलए अनुिंसाए ाँ
(पहला पुनरीक्षण)
38 आई एस 15629 : 2025 30 अप्रलै आई एस 15629 : 2005 30 अक्टूबर
आई एस ओ 7434 : 2024 2025 आई एस ओ 7434 : 1983 2025
फास्ट्टनसभ — िंकु जसरे िाल ेखााँचेिार िंकू जसरे िाल ेखााँचेिार सैट स्ट्क्रू
सैट स्ट्क्रू — जिजिजि
(पहला पुनरीक्षण)
39 आई एस 15631 : 2025 30 अप्रलै आई एस 15631 : 2005 30 अक्टूबर
आई एस ओ 7436 : 2024 2025 आई एस ओ 7436 : 1983 2025
फास्ट्टनसभ — कप आकार के जसरे िाल े कप आकार के जसरे िाले
खााँचेिार सैट स्ट्क्रू — जिजिजि खााँचेिार सैट स्ट्क्रू8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन भारतीय मानकों, यदि िापस िापस होन े की
स.ं तिा िीर्कभ जतजि जलए िान ेह,ैं की सख्ं या, िर् भ जतजि
तिा िीर्कभ
(1) (2) (3) (4) (5)
(पहला पुनरीक्षण )
40 आई एस 17003 (भाग 1) : 2025 30 अप्रलै आई एस 17003 (भाग 1) : 30 अक्टूबर
आई एस ओ 80004-1 : 2023 2025 2022 2025
नैनो प्रौद्योजगकी — िब्िािली आई एस ओ/टी एस 80004-1 :
भाग 1 मलू िब्िािली 2015
(िसू रा पनु रीक्षण) नैनो-प्रौद्योजगकी — िब्िािली
भाग 1 कोर िब्िािली
(पहला पुनरीक्षण)
आई एस 17003 (भाग 2) :
2018
आई एस ओ/टी एस 80004-2 :
2015
नैनो-प्रौद्योजगकी — िब्िािली
भाग 2 नैनो-िस्ट्तुऐं
आई एस/आई एस ओ/टी एस
80004-4 : 2011
नैनोप्रौद्योजगकी — िब्िािली
भाग 4 नैनोस्ट्रक्चडभ सामजग्रया ाँ
41 आई एस 18471 : 2025 30 अप्रलै आई एस 18471 (भाग 1) : 30 अक्टूबर
फास्ट्टनसभ — टैजपगं स्ट्क्रू थ्रेड के साि 2025 2023 2025
जड्रजलंग स्ट्क्रू — जिजिजि आई एस ओ 15481 : 1999
(पहला पुनरीक्षण) फास्ट्टनसभ — टैजपगं स्ट्क्रू थ्रेड के
साि क्रॉस ररसेस्ट्ड जड्रजलगं स्ट्क्रू
भाग 1 पैन हडै
आई एस 18471 (भाग 2) :
2023
आई एस ओ 15482 : 1999
फास्ट्टनसभ — टैजपगं स्ट्क्रू थ्रेड के
साि क्रॉस ररसेस्ट्ड जड्रजलगं स्ट्क्रू
भाग 2 काउंटरसंक हडै
आई एस 18471 (भाग 3) :
2023
आई एस ओ 15483 : 1999
फास्ट्टनसभ — टैजपगं स्ट्क्रू थ्रेड के
साि क्रॉस ररसेस्ट्ड जड्रजलगं स्ट्क्रू[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 9
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन भारतीय मानकों, यदि िापस िापस होन े की
स.ं तिा िीर्कभ जतजि जलए िान ेह,ैं की सख्ं या, िर् भ जतजि
तिा िीर्कभ
(1) (2) (3) (4) (5)
भाग 3 उठे हुए काउंटरसंक हडै
आई एस 18476 : 2023
आई एस ओ 15480 : 2019
फास्ट्टनसभ — टैजपगं स्ट्क्रू थ्रेड के
साि र्ट्कोणीय िॉिर िीर् भ िाले
जड्रजलंग स्ट्क्रू
42 आई एस 19167 : 2025 30 अप्रलै लाग ूनहीं लाग ूनहीं
आई एस ओ 21702 : 2019 2025
प्लाजस्ट्टक और अन्य गरै -जछदद्रत सतहों
पर एंटीिायरल गजतजिजध का मापन
43 आई एस 19208 : 2025 30 अप्रलै लाग ूनहीं लाग ूनहीं
िस्त्रादि — जिमान अिरोधक बैररयर के 2025
जलए नायलॉन टेप — जिजिजि
44 आई एस 19214 : 2025 30 अप्रलै लाग ूनहीं लाग ूनहीं
बूचड़खानों से प्रसंस्ट्करण केंद्रों/ जितरण 2025
केंद्रों तक खाद्य पि ु ििों का पररिहन —
रीजत संजहता
45 आई एस 19218 : 2025 30 अप्रलै लाग ूनहीं लाग ूनहीं
िस्त्रादि — कटाि जनयंत्रण अनप्रु योगों के 2025
जलए िटा के जबना बुने हुए जसले जमजश्रत
भूिस्त्र — जिजिजि
46 आई एस 19236 : 2025 30 अप्रलै लाग ूनहीं लाग ूनहीं
कृजर् िस्त्रादि — उच्च घनत्ि िाले 2025
पॉलीएजिलीन (एचडीपीई) के बुने
हुए ग्रो बगै — जिजिजि
47 आई एस 19238 : 2025 30 अप्रलै लाग ूनहीं लाग ूनहीं
कृजर् िस्त्रादि — उच्च घनत्ि 2025
पॉलीएजिलीन (एचडीपीई) से बुने हुए
एिोला जबस्ट्तर — जिजिजि
48 आई एस 19263 : 2025 30 अप्रलै लाग ूनहीं लाग ूनहीं
िस्त्रादि — खािी धागा — जिजिजि 2025
जचत्रा गुिा, िैज्ञाजनक िी एिं उप महाजनिेिक (हॉलमार्किंग एि ं रेजनंग)
[जिज्ञापन-III/4/असा./84/2025-26]10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 30th April, 2025
Ref: HQ-PUB013/1/2020-PUB-BIS (1222).––In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which
are given in the second column of the schedule hereto annexed have been established on the date indicated against it in
third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force
concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
Sl No., Year & Title of the Indian Date of No., Year & Title of the Indian Date of
No. Standards Established Establishment Standards to be Withdrawn, if Withdrawal
any
(1) (2) (3) (4) (5)
IS 21 : 2025 30 April 2025 IS 21 – 1992 30 October
1 Wrought Aluminium and Wrought Aluminium and 2025
Aluminium Alloys for Manufacture Aluminium Alloys for
of Utensils — Specification Manufacture of Utensils —
(Fifth Revision) Specification
(Fourth Revision)
IS 1364 (Part 6) : 2025 30 April 2025 IS 1364 (Part 6) : 2018 30 October
2 ISO 4033 : 2023 ISO 4033 : 2012 2025
Hexagon Head Bolts, Screws Hexagon Head Bolts, Screws
and Nuts of Product Grades A and Nuts of Product Grades A
and B and B
Part 6 Hexagon Nuts, Style 2 Part 6 Hexagon Nuts, Style 2
(Size Range M5 to M39) (First Revision)
(Second Revision)
IS 1501 (Part 1) : 2025 30 April 2025 IS 1501 (Part 1) : 2020 30 October
3 ISO 6507-1 : 2023 ISO 6507-1 : 2018 2025
Metallic Materials — Vickers Metallic Materials — Vickers
Hardness Test Hardness Test
Part 1 Test Method Part 1 Test Method
(Sixth Revision) (Fifth Revision)
IS 1559 (Part 3) : 2025 30 April 2025 IS 1559 (Part III) – 1982 30 October
4 Methods of Chemical Analysis of Methods of Chemical Analysis 2025
Ferrosilicon of Ferrosilicon
Part 3 Determination of Sulphur Part III Determination of
(Second Revision) Sulphur
(First Revision)[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 11
Sl No., Year & Title of the Indian Date of No., Year & Title of the Indian Date of
No. Standards Established Establishment Standards to be Withdrawn, if Withdrawal
any
(1) (2) (3) (4) (5)
IS 1586 (Part 2) : 2025 30 April 2025 IS 1586 (Part 2) : 2018 30 October
5 ISO 6508-2 : 2023 ISO 6508-2 : 2015 2025
Metallic Materials — Rockwell Metallic Materials — Rockwell
Hardness Test Hardness Test
Part 2 Verification and Calibration Part 2 Verification and
of Testing Machines and Calibration of Testing
Indenters (Sixth Revision) Machines and Indenters
(Fifth Revision)
IS 1586 (Part 3) : 2025 30 April 2025 IS 1586 (Part 3) : 2018 30 October
6 ISO 6508-3 : 2023 ISO 6508-3 : 2015 2025
Metallic Materials — Rockwell Metallic Materials — Rockwell
Hardness Test Hardness Test
Part 3 Calibration of Reference Part 3 Calibration of Reference
Blocks Blocks
(Sixth Revision) (Fifth Revision)
IS 1917 (Part 3) : 2025 30 April 2025 IS 1917 (Part 3) : 1992 30 October
7 Chemical Analysis of Quartzite Chemical Analysis of Quartzite 2025
and High Silica Sand and High Silica Sand
Part 3 Determination of Silica Part 3 Determination of Silica
(Second Revision) (First Revision)
IS 1921 : 2025 30 April 2025 IS 1921 : 2005 30 October
8 Solder Wire — Solid and Flux Flux Cored Solder Wire — 2025
Cored — Specification Specification
(Third Revision) (Second Revision)
IS 2131 : 2025 30 April 2025 IS 2131 – 1981 30 October
9 Standard Penetration Test of Soil Method for Standard 2025
— Method of Test Penetration Test for Soils
(Second Revision) (First Revision)
IS 2248 : 2025 30 April 2025 IS 2248 : 1992 30 October
10 Clay Products for Buildings — Glossary of Terms Relating to 2025
Glossary of Terms Clay Products for Buildings
(Third Revision) (Second Revision)
IS 2518 : 2025 30 April 2025 IS 2518 – 1964 30 October
11 Textiles — Seaworthy Packaging Code for Seaworthy Packaging 2025
of Wool Hosiery Yarn and Goods of Wool Hosiery Yarn and
— Code of Practice Goods
(First Revision)12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
Sl No., Year & Title of the Indian Date of No., Year & Title of the Indian Date of
No. Standards Established Establishment Standards to be Withdrawn, if Withdrawal
any
(1) (2) (3) (4) (5)
IS 3086 : 2025 30 April 2025 IS 3086 – 1965 30 October
12 Textiles — Seaworthy Packaging Code for Seaworthy Packaging 2025
of Cotton Hosiery Yarn and of Cotton Hosiery Yarn and
Goods — Code of Practice Goods
(First Revision)
IS 4027 (Part 3) : 2025 30 April 2025 IS 4027 (Part 3) – 1987 30 October
13 Methods for Chemical Analysis of Methods of Chemical Analysis 2025
Bronzes of Bronzes
Part 3 Determination of Part 3 Determination of
Phosphorus by Volumetric Phosphorus — Volumetric
Method Method
(Second Revision) (First Revision)
IS 4027 (Part 5) : 2025 30 April 2025 IS 4027 (Part 5) – 1987 30 October
14 Methods for Chemical Analysis of Methods of Chemical Analysis 2025
Bronzes of Bronzes
Part 5 Determination of Tin by Part 5 Determination of Tin-
Iodimetric Method Iodimetric Method
(Second Revision) (First Revision)
IS 4027 (Part 7) : 2025 30 April 2025 IS 4027 (Part 7) : 1990 30 October
15 Methods for Chemical Analysis of Methods of Chemical Analysis 2025
Bronzes of Bronzes
Part 7 Determination of Antimony Part 7 Determination of
by Rhodamine B Antimony by Rhodamine B
Spectrophotometric Method Spectrophotometric Method
(Second Revision) (First Revision)
IS 4027 (Part 9) : 2025 30 April 2025 IS 4027 (Part 9) : 1991 30 October
16 Methods for Chemical Analysis of Methods of Chemical Analysis 2025
Bronzes of Bronzes
Part 9 Determination of Part 9 Determination of
Aluminium by Atomic Absorption Aluminium by Atomic
Spectrometric Method Absorption Spectrometric
(Second Revision) Method
(First Revision)
IS 6024 : 2025 30 April 2025 IS 6024 – 1983 30 October
17 Guards for Harvesting Machines Specification for Guards for 2025
—Specification Harvesting Machines[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 13
Sl No., Year & Title of the Indian Date of No., Year & Title of the Indian Date of
No. Standards Established Establishment Standards to be Withdrawn, if Withdrawal
any
(1) (2) (3) (4) (5)
(Second Revision) (First Revision)
IS 6226 (Part 1) : 2025 30 April 2025 IS 6226 (Part 1) : 1994 30 October
18 Recommendations of Apparatus Recommendations of 2025
for Chemical Analysis of Metals Apparatus for Chemical
Part 1 Apparatus for Analysis of Metals
Determination of Carbon by Part 1 Apparatus for
Direct Combustion (Second Determination of Carbon by
Revision) Direct Combustion
(First Revision)
IS 6751 : 2025 30 April 2025 IS 6751 – 1972 30 October
19 Aluminium Alloy Castings and Specification for Aluminium 2025
Strips for Bearings ― Alloy Castings and Strips for
Specification (First Revision) Bearings
IS 6932 (Part 1) : 2025 30 April 2025 IS 6932 (Part 1) – 1973 30 October
20 Building Limes — Method of Test Methods of Tests for Building 2025
Part 1 Determination of Insoluble Limes
Residue in Dilute Acid and Alkali, Part 1 Determination of
Loss on Ignition, Insoluble Insoluble Residue, Loss on
Residue in Hydrochloric Acid, Ignition, Insoluble Matter,
Silicon Dioxide, Ferric and Silicon Dioxide, Ferric and
Aluminium Oxide, Calcium Oxide Aluminium Oxide, Calcium
and Magnesium Oxide Oxide and Magnesium Oxide
(First Revision)
IS 6932 (Part 2) : 2025 30 April 2025 IS 6932 (Part II) – 1973 30 October
21 Building Limes — Method of Test Methods of Tests for Building 2025
Part 2 Determination of Carbon Limes
Dioxide Content Part II Determination of
(First Revision) Carbon Dioxide Content
IS 6932 (Part 3) : 2025 30 April 2025 IS 6932 (Part III) – 1973 30 October
22 Building Limes — Method of Test Methods of Tests for Building 2025
Part 3 Determination of Residue Limes
on Slaking of Quicklime Part III Determination of
(First Revision) Residue on Slaking of
Quicklime
IS 6932 (Part 4) : 2025 30 April 2025 IS 6932 (Part IV) – 1973 30 October
23 Building Limes — Method of Test Methods of Tests for Building 2025
Part 4 Determination of Fineness Limes14 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
Sl No., Year & Title of the Indian Date of No., Year & Title of the Indian Date of
No. Standards Established Establishment Standards to be Withdrawn, if Withdrawal
any
(1) (2) (3) (4) (5)
of Hydrated Lime Part IV Determination of
(First Revision) Fineness of Hydrated Lime
IS 6932 (Part 5) : 2025 30 April 2025 IS 6932 (Part V) – 1973 30 October
24 Building Limes — Method of Test Methods of Tests for Building 2025
Part 5 Determination of Limes
Unhydrated Oxide Part V Determination of
(First Revision) Unhydrated Oxide
IS 6932 (Part 6) : 2025 30 April 2025 IS 6932 (Part VI) – 1973 30 October
25 Building Limes — Method of Test Methods of Tests for Building 2025
Part 6 Determination of Volume Limes
Yield of Quicklime Part VI Determination of
(First Revision) Volume Yield of Quicklime
IS 6932 (Part 7) : 2025 30 April 2025 IS 6932 (Part VII) – 1973 30 October
26 Building Limes — Method of Test Methods of Tests for Building 2025
Part 7 Determination of Limes
Compressive and Transverse Part VII Determination of
Strengths Compressive and Transverse
(First Revision) Strengths
IS 6932 (Part 8) : 2025 30 April 2025 IS 6932 (Part VIII) – 1973 30 October
27 Building Limes — Method of Test Methods of Tests for Building 2025
Part 8 Determination of Limes
Workability Part VIII Determination of
(First Revision) Workability
IS 6932 (Part 9) : 2025 30 April 2025 IS 6932 (Part IX) – 1973 30 October
28 Building Limes — Method of Test Methods of Tests for Building 2025
Part 9 Determination of Limes
Soundness Part IX Determination of
(First Revision) Soundness
29 IS 6932 (Part 10) : 2025 30 April 2025 IS 6932 (Part X) – 1973 30 October
Building Limes — Method of Test Methods of Tests for Building 2025
Part 10 Determination of Popping Limes
and Pitting of Hydrated Lime Part X Determination of
(First Revision) Popping and Pitting of
Hydrated Lime[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 15
Sl No., Year & Title of the Indian Date of No., Year & Title of the Indian Date of
No. Standards Established Establishment Standards to be Withdrawn, if Withdrawal
any
(1) (2) (3) (4) (5)
IS 6932 (Part 11) : 2025 30 April 2025 IS 6932 (Part 11) – 1983 30 October
30 Building Limes — Method of Test Methods of Tests for Building 2025
Part 11 Determination of Setting Limes
Time of Hydrated Lime Part 11 Determination of
(First Revision) Setting Time of Hydrated Lime
IS 10054 : 2025 30 April 2025 IS 10054 : 1996 30 October
31 Textiles — High Density Textiles — High Density 2025
Polyethylene (HDPE) Polyethylene (HDPE)
Monofilament Mosquito Netting, Monofilament Mosquito
Round Mesh —Specification Netting, Round Mesh —
(Second Revision) Specification
(First Revision)
IS 11033 : 2025 30 April 2025 IS 11033 – 1984 30 October
32 Ridger Type Animal Drawn Specification for Animal Drawn 2025
Potato Digger — Specification Potato Digger, Ridger Type
(First Revision)
IS 12182 : 2025 30 April 2025 IS 12182 – 1987 30 October
33 Determination of Effects of Guidelines for Determination of 2025
Sedimentation in Planning and Effects of Sedimentation in
Performance of Reservoirs — Planning and Performance of
Guidelines Reservoirs
(First Revision)
IS 12308 (Part 1) : 2025 30 April 2025 IS 12308 (Part 1) – 1987 30 October
34 Methods for Chemical Analysis of Methods for Chemical Analysis 2025
Cast Iron and Pig Iron of Cast Iron and Pig Iron
Part 1 Determination of Total Part 1 Determination of Total
Carbon by Thermal Conductivity Carbon by Thermal
Method Conductivity Method
(for Carbon 1.00 Percent to 4.50 (for Carbon 1.00 to 4.50
Percent) Percent)
(First Revision)
IS 12308 (Part 11) : 2025 30 April 2025 IS 12308 (Part 11) : 1991 30 October
35 Methods for Chemical Analysis of Methods for Chemical Analysis 2025
Cast Iron and Pig Iron of Cast Iron and Pig Iron
Part 11 Determination of Total Part 11 Determination of Total
Carbon by the Direct Combustion Carbon by the Direct16 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
Sl No., Year & Title of the Indian Date of No., Year & Title of the Indian Date of
No. Standards Established Establishment Standards to be Withdrawn, if Withdrawal
any
(1) (2) (3) (4) (5)
Volumetric Method Combustion Volumetric
(for Carbon 1.50 Percent to 4.50 Method
Percent) (for Carbon 1.50 to 4.50
(First Revision) Percent)
IS 12308 (Part 12) : 2025 30 April 2025 IS 12308 (Part 12) : 1992 30 October
36 Methods for Chemical Analysis of Methods of Chemical Analysis 2025
Cast Iron and Pig Iron of Cast Iron and Pig Iron
Part 12 Determination of Copper Part 12 Determination of
by Atomic Absorption Copper by Atomic Absorption
Spectrometric Method Spectrometric Method
(for Copper 0.01 Percent to 0.5 (for Copper 0.01 to 0.5
Percent) Percent)
(First Revision)
IS 12363 : 2025 30 April 2025 IS 12363 – 1988 30 October
37 Track Width of Agricultural Recommendation on Track 2025
Tractors — Recommendations Width of Agricultural Tractors
(First Revision)
IS 15629 : 2025 30 April 2025 IS 15629 : 2005 30 October
38 ISO 7434 : 2024 ISO 7434 : 1983 2025
Fasteners — Slotted Set Screws Slotted Set Screws with Cone
with Cone Point — Specification Point
(First Revision)
IS 15631 : 2025 30 April 2025 IS 15631 : 2005 30 October
39 ISO 7436 : 2024 ISO 7436 : 1983 2025
Fasteners — Slotted Set Screws Slotted Set Screws with Cup
with Cup Point — Specification Point
(First Revision)
IS 17003 (Part 1) : 2025 30 April 2025 IS 17003 (Part 1) : 2022 30 October
ISO 80004-1 : 2023 ISO/TS 80004-1 : 2015 2025
40
Nanotechnologies — Vocabulary Nanotechnologies —
Part 1 Core Vocabulary Vocabulary
(Second Revision) Part 1 Core Terms
(First Revision)
IS 17003 (Part 2) : 2018
ISO/TS 80004-2 : 2015[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 17
Sl No., Year & Title of the Indian Date of No., Year & Title of the Indian Date of
No. Standards Established Establishment Standards to be Withdrawn, if Withdrawal
any
(1) (2) (3) (4) (5)
Nanotechnologies —
Vocabulary
Part 2 Nano-Objects
IS/ISO/TS 80004-4 : 2011
Nanotechnologies —
Vocabulary
Part 4 Nanostructured
Materials
IS 18471 : 2025 30 April 2025 IS 18471 (Part 1) : 2023 30 October
Fasteners — Drilling Screws with ISO 15481 : 1999 2025
41
Tapping Screw Thread — Fasteners — Cross Recessed
Specification Drilling Screws with Tapping
(First Revision) Screw Thread
Part 1 Pan Head
IS 18471 (Part 2) : 2023
ISO 15482 : 1999
Fasteners — Cross Recessed
Drilling Screws with Tapping
Screw Thread
Part 2 Countersunk Head
IS 18471 (Part 3) : 2023
ISO 15483 : 1999
Fasteners — Cross Recessed
Drilling Screws with Tapping
Screw Thread
Part 3 Raised Countersunk
Head
IS 18476 : 2023
ISO 15480 : 2019
Fasteners — Hexagon Washer
Head Drilling Screws with
Tapping Screw Thread
IS 19167 : 2025 30 April 2025 NA NA
42 ISO 21702 : 2019
Measurement of Antiviral Activity
on Plastics and other Non-porous
Surfaces
IS 19208 : 2025 30 April 2025 NA NA18 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
Sl No., Year & Title of the Indian Date of No., Year & Title of the Indian Date of
No. Standards Established Establishment Standards to be Withdrawn, if Withdrawal
any
(1) (2) (3) (4) (5)
43 Textiles — Nylon Tape for
Aircraft Arrester Barrier —
Specification
IS 19214 : 2025 30 April 2025 NA NA
44 Transportation of Food Animal
Carcasses from Abattoirs to
Processing/Distribution Centres
— Code of Practice
IS 19218 : 2025 30 April 2025 NA NA
45 Textiles — Coir Non-woven
Stitched Composite Geotextiles
for Erosion Control Applications
— Specification
IS 19236 : 2025 30 April 2025 NA NA
46 Agro Textiles — High Density
Polyethylene (HDPE) Woven
Grow Bags — Specification
IS 19238 : 2025 30 April 2025 NA
47 Agro Textiles — High Density NA
Polyethylene (HDPE) Woven
Azolla Bed — Specification
IS 19263 : 2025 30 April 2025 NA NA
48 Textiles — Khadi Yarn —
Specification
CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training)
[ADVT.-III/4/Exty./84/2025-26]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.