Home India Bureau of Indian Standards In pursuance of Sub rule (1) of Rule (15) of the Bureau of I...
Date: 10-Feb-2025 Category: Extra Ordinary State: Union Government Country: India

In pursuance of Sub rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards

Issued by Bureau of Indian Standards · Not Applicable

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

What it means

  • The gazette notification issued by the Bureau of Indian Standards (BIS) announces the establishment and revision of several Indian Standards. It specifies the dates on which the new standards are established and the dates on which the older standards will be withdrawn.

Key Changes

  • Several Indian Standards are being updated and replaced with newer versions.
  • The notification lists 13 standards that have been established on January 29, 2025.
  • For some of these standards (IS 4092, IS 7906, IS 9496, IS 9815, IS 10306, IS 12225, IS 13730, IS/IEC 60127-1), older versions will be withdrawn on July 29, 2025. This means both the old and new standards will be in effect until July 29, 2025.
  • Specifically, IS 4092:2025 replaces IS 4092 (Part 1): 1992, IS 7906 (Part 3): 2025 replaces IS 7906 (Part III) – 1975, IS 9496: 2025 replaces IS 9496 (Part 1) – 1980, IS 9815 (Part 1): 2025 replaces IS 9815 (Part 1): 1994, IS 10306: 2025 replaces IS 10306 – 1982, IS 12225: 2025 replaces IS 12225: 1997, IS 13730 (Part 1): 2025 replaces IS 13730 (Part 1): 2018, and IS/IEC 60127-1:2023 replaces IS/IEC 60127-1:2006.
  • Several new standards related to electrotechnical products, relays, earth-moving machinery, and flow battery energy systems have been established without replacing older versions. These include IS 16197 (Part 10): 2025, IS 17064 (Part 4): 2025, IS 17064 (Part 10): 2025, IS 19094 (Part 6): 2025 and IS 19095 (Part 1): 2025

Impact Analysis

Manufacturers

  • Manufacturers need to be aware of new standards for products not previously covered.

Consumers

  • Increased reliability and performance of products due to updated standards.

Bureau of Indian Standards (BIS)

  • BIS is responsible for communicating and clarifying updates to relevant stakeholders.

Government Agencies

  • Enforcement agencies need to be aware of the changes to ensure compliance.

Key Entities Referenced

Bureau of Indian Standards (BIS): The national standards body of India responsible for formulating, implementing, and promoting standards. Indian Standards (IS): A set of standards developed by the Bureau of Indian Standards covering various products, processes, and services. IEC (International Electrotechnical Commission): An international standards organization that prepares and publishes international standards for all electrical, electronic and related technologies. ISO (International Organization for Standardization): An independent, non-governmental international organization that develops standards to ensure the quality, safety, and efficiency of products, services, and systems.
Official Source Record View Original Source →
See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99 सी.जी.-डी.एल.-अ.-11022025-260889 xxxGIDHxxx CG-DL-E-11022025-260889 xxxGIDExxx असाधारण EXTRAORDINARY भाग III—खण् ड 4 PART III—Section 4 प्राजधकार स ेप्रकाजित PUBLISHED BY AUTHORITY स.ं 97] नई दिल्ली, सोमिार, फरिरी 10, 2025/माघ 21, 1946 No. 97] NEW DELHI, MONDAY, FEBRUARY 10, 2025/MAGHA 21, 1946 भारतीय मानक ब्य रू ो (उपभोक्त ा मामल े जिभाग) अजधसचू ना नई दिल्ली, 31 िनिरी, 2025 सिं भ भ :HQ-PUB013/ 1/ 2020-PUB-BIS (1153).— भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के जििरण इसम ें संलग्न अनूसूची के जद्वतीय स्ट्तंभ म ें दिय े गय े ह,ैं तीसरे स्ट्तभं म ें इंजगत जतजि को स्ट्िाजपत हो गय े ह|ैं चौिे स्ट्तंभ म ें दिय े गय े मानकों के जििरण, यदि कोई हो तो ि े भी साि-साि लाग ू रहगें े िब तक ि े पााँचि ें स्ट्तंभ म ें इंजगत जतजि को िापस जलए िाने ह|ैं अनसु चू ी क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस जलए िान ेह,ैं िापस होन ेकी जतजि स.ं तिा िीर्कभ की सख्ं या, िर् भतिा िीर्कभ (1) (2) (3) (4) (5) 1 29 िनिरी 2025 29 िुलाई 2025 आई एस 4092 : 2025 आई एस 4092 (भाग 1) : 1992 औद्योजगक और िाजणजययक अनुप्रयोग के औद्योजगक एिं िाजणयय अनुप्रयोगों के जलए जलए बास्ट्केट और बाउल और कंपन प्रकार टोकरी और कटोरी और कम्पन प्रकार के के सेंरीफ्यूि — जिजिजि अपकेन्द्रण यंत्र (तीसरा पुनरीक्षण) भाग 1 सामान्द्य अपेक्षाएाँ (िसू रा पुनरीक्षण) 994 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस जलए िान ेह,ैं िापस होन ेकी जतजि स.ं तिा िीर्कभ की सख्ं या, िर् भतिा िीर्कभ (1) (2) (3) (4) (5) 2 29 िनिरी 2025 29 िुलाई 2025 आई एस 7906 (भाग 3) : 2025 आई एस 7906 (भाग III) – 1975 कुंडलाकार संपीड़न कमाजनयााँ कुंडलाकार संपीड़न कमाजनयााँ भाग 3 िृताकार सेक्िन तार तिा छड़ों से भाग III िृताकार सेक्िन तार तिा छड़ों से बनी कमाजनयों के जिजनिेिन हेतु डेटा िीट बनी कमाजनयों के जिजनिेिन हेतु डेटा िीट (पहला पुनरीक्षण) 3 29 िनिरी 2025 29 िुलाई 2025 आई एस 9496 : 2025 आई एस 9496 (भाग 1) – 1980 प्लाजस्ट्टक दफशिंग फ्लोट — जिजिजि दफशिंग फ्लोट के जलए जिजिजि (पहला पुनरीक्षण) भाग I एल्यूमीजनयम जमश्र धातु और ग्लास फ्लोट 4 29 िनिरी 2025 29 िुलाई 2025 आई एस 9815 (भाग 1) : 2025 आई एस 9815 (भाग 1) : 1994 सिो-मोटर प्रचाजलत स्ट्िचाजलत लाइन सिो-मोटर प्रचाजलत स्ट्िचल लाइन िोल्टता िोल्टेि संिोधक संिोधक भाग 1 एक-फेि अनुप्रयोगों के जलए भाग 1 एक-फेिी अनुप्रयोगों के जलए संिोधक — जिजिजि संिोधक — जिजिजि (तीसरा पुनरीक्षण) (िसू रा पुनरीक्षण) 5 29 िनिरी 2025 29 िुलाई 2025 आई एस 10306 : 2025 आई एस 10306 – 1982 घरेलू प्रयोिनों की जसलाई मिीने — फीड घरेलू प्रयोिन की जसलाई मिीनों के जलए जलशफ्टंग रॉक िाफ्ट क्रैंक — जिजिजि फीड जलशफ्टंग रॉक िाफ्ट क्रैंक की जिजिजि (पहला पुनरीक्षण) 6 29 िनिरी 2025 29 िुलाई 2025 आई एस 12225 : 2025 आई एस 12225 : 1997 सेन्द्रीफ्यूगल िेट पंप — जिजिजि अपकेन्द्री िेट पम्प — जिजिजि (िसू रा पुनरीक्षण) (पहला पुनरीक्षण) 7 29 िनिरी 2025 29 िुलाई 2025 आई एस 13730 (भाग 1) : 2025 आई एस 13730 (भाग 1) : 2018 आई ई सी 60317-1 : 2010 आई ई सी 60317-1 : 2010 + ए एम डी 1 : 2024 सी एस िी जििेर् प्रकार के कुंडलण तारों की जिजिजियााँ जििेर् प्रकार की कुंडलण तारों की जिजिजि भाग 1 पोलीजिनाइल एसीटल अनेमजलत भाग 1 पॉलीजिनाइल एसीटल एनामेल्ड गोल कापर की तार, िगभ 105 गोल तांबे के तार, क्लास 105 (पहला पुनरीक्षण) (िसू रा पुनरीक्षण) 8 29 िनिरी 2025 आई एस 16197 (भाग 10) : 2025 लागू नही लागू नही आई ई सी 62321-10 : 2020 जिद्युत तकनीकी उत्पािों में कुछ पिािों का जनधाभरण भाग 10 गैस क्रोमैटोग्राफी-मास स्ट्पेक्रोमेरी (िीसी-एमएस) द्वारा पॉजलमर और इलेक्रॉजनक्स में पॉलीसाइजक्लक एरोमैटटक हाइड्रोकाबभन (पीएएच) 9 29 िनिरी 2025 आई एस 17064 (भाग 4) : 2025 लागू नही लागू नही आई ई सी 61810-4 : 2020 जिद्युत यांजत्रक प्रािजमक टरले[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3 क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भ प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस जलए िान ेह,ैं िापस होन ेकी जतजि स.ं तिा िीर्कभ की सख्ं या, िर् भतिा िीर्कभ (1) (2) (3) (4) (5) भाग 4 रीड टरले के जलए सामान्द्य एिं सुरक्षा अपेक्षाएाँ 10 29 िनिरी 2025 आई एस 17064 (भाग 10) : 2025 लागू नही लागू नही आई ई सी 61810-10 : 2019 जिद्युत यांजत्रक प्रािजमक टरले भाग 10 उच्च क्षमता िाले टरले के जलए अजतटरक्त कायाभत्मक पहलू एिं सुरक्षा अपेक्षाएाँ 11 29 िनिरी 2025 आई एस 19094 (भाग 6) : 2025 लागू नही लागू नही आई एस ओ 10263-6 : 2009 भू-संचलन मिीनरी — संचालन आिेिन िातािरण भाग 6 सौर ताप प्रभाि का जनधाभरण 12 29 िनिरी 2025 आई एस 19095 (भाग 1) : 2025 लागू नही लागू नही आई ई सी 62932-1 : 2020 स्ट्टेिनरी प्रयोग के जलए प्रिाह बैटरी ऊिाभ प्रणाली भाग 1 िब्िािली एिं सामान्द्य पहलू 13 29 िनिरी 2025 29 िुलाई 2025 आई एस/आई ई सी 60127-1 : 2023 आई एस/आई ई सी 60127-1 : 2006 लघु फ़्यूज़ लघु फ्यूि भाग 1 लघु फ़्यज़ू की पटरभार्ाएाँ और लघु भाग 1 लघु फ्यिू ों की पटरभार्ा और लघु फ़्यूज़-शलंक के जलय ेसामान्द्य अपेक्षाएाँ फ्यूि –शलंक की सामान्द्य अपेक्षाएाँ (िसू रा पुनरीक्षण) (पहला पुनरीक्षण) जचत्रा गुप्ता िैज्ञाजनक िी एि ं उप महाजनिेिक (हॉलमार्किंग एि ं रेशनंग) [जिज्ञापन-III/4/असा./954/2024-25] BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 31st January, 2025 Ref :HQ-PUB013/1/2020-PUB-BIS (1153).— In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column. SCHEDULE Sl No., Year & Title of the Indian Date of No. , Year & Title of the Date of No. Standards Established Establishment Indian Standards to be Withdrawal Withdrawn, if any4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] (1) (2) (3) (4) (5) 1 IS 4092 : 2025 IS 4092 (Part 1) : 1992 29 July 2025 Centrifuges of the Basket and Bowl 29 January Centrifuges of the Basket and and Vibrating Type for Use in 2025 Bowl and Vibrating Type for Use Industrial and Commercial in Industrial and Commercial Applications — Specification Applications (Third Revision) Part 1 General Requirements (Second Revision) 2 IS 7906 (Part 3) : 2025 IS 7906 (Part III) – 1975 29 July 2025 Helical Compression Springs 29 January Helical Compression Springs Part 3 Data Sheet for Specifications 2025 Part III Data Sheet for for Springs Made from Circular Specifications for Springs Made Section Wire and Bar from Circular Section Wire and (First Revision) Bar 3 IS 9496 : 2025 IS 9496 (Part I) – 1980 29 July 2025 Plastic Fishing Floats — 29 January Specification for Fishing Floats Specification 2025 Part I Aluminium Alloy and (First Revision) Glass Floats 4 IS 9815 (Part 1) : 2025 IS 9815 (Part 1) : 1994 29 July 2025 Servo-motor Operated Automatic 29 January Servo-motor Operated Automatic Line Voltage Correctors 2025 Line Voltage Correctors Part 1 Correctors for Single-Phase Part 1 Correctors for Single- Applications — Specification Phase Applications — (Third Revision ) Specification (Second Revision) 5 IS 10306 : 2025 IS 10306 – 1982 29 July 2025 Sewing Machine for Household 29 January Specification for Feed Lifting Purposes — Feed Lifting Rock 2025 Rock Shaft Crank for Sewing Shaft Crank — Specification Machines for Household (First Revision) Purposes 6 IS 12225 : 2025 IS 12225 : 1997 29 July 2025 Centrifugal Jet Pump — 29 January Centrifugal Jet Pump — Specification 2025 Specification (Second Revision) (First Revision) 7 IS 13730 (Part 1) : 2025 IS 13730 (Part 1) : 2018 29 July 2025 IEC 60317-1 : 2010 29 January IEC 60317-1 : 2010 + AMD 1 : 2024 CSV 2025 Specification for Particular Specification for Particular Types Types of Winding Wires of Winding Wires Part 1 Polyvinyl Acetal Part 1 Polyvinyl Acetal Enamelled Enamelled Round Copper Wire, Round Copper Wire, Class 105 Class 105 (Second Revision) (First Revision) NA 8 IS 16197 (Part 10) : 2025 NA IEC 62321-10 : 2020 29 January Determination of Certain 2025 Substances in Electrotechnical Products Part 10 Polycyclic Aromatic Hydrocarbons (PAHs) in Polymers and Electronics by Gas[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5 Sl No., Year & Title of the Indian Date of No. , Year & Title of the Date of No. Standards Established Establishment Indian Standards to be Withdrawal Withdrawn, if any (1) (2) (3) (4) (5) Chromatography-Mass Spectrometry (GC-MS) NA 9 IS 17064 (Part 4) : 2025 NA IEC 61810-4 : 2020 29 January Electromechanical Elementary 2025 Relays Part 4 General and Safety Requirements for Reed Relays NA 10 IS 17064 (Part 10) : 2025 NA IEC 61810-10 : 2019 29 January Electromechanical Elementary 2025 Relays Part 10 Additional Functional Aspects and Safety Requirements for High-Capacity Relays NA 11 IS 19094 (Part 6) : 2025 NA ISO 10263-6 : 2009 29 January Earth-Moving Machinery — 2025 Operator Enclosure Environment Part 6 Determination of Effect of Solar Heating NA 12 IS 19095 (Part 1) : 2025 NA IEC 62932-1 : 2020 29 January Flow Battery Energy Systems for 2025 Stationary Applications Part 1 Terminology and General Aspects 13 IS/IEC 60127-1 : 2023 IS/IEC 60127-1 : 2006 29 July 2025 Miniature Fuses 29 January Miniature Fuses Part 1 Definitions for Miniature 2025 Part 1 Definitions for Miniature Fuses and General Requirements Fuses and General Requirements for Miniature Fuse-Links for Miniature Fuse-Links (Second Revision) (First Revision) CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training) [ADVT.-III/4/Exty./954/2024-25] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research