Date: 2026-01-13Category: Extra OrdinaryState: Union GovernmentCountry: India
In pursuance of Sub rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
**Executive Summary**
This is a notification from the Bureau of Indian Standards (BIS) that announces the establishment of new Indian standards and the withdrawal of certain older standards. The new standards were established on January 5, 2026. The replaced standards will be withdrawn on July 5, 2026.
**Key Points / Main Content**
* **Establishment of New Standards (January 5, 2026):**
* **IS 713: 2026:** Zinc-Aluminium Alloy Ingots Intended for Foundry and Die Castings - Specification (Third Revision)
* **IS 1170: 2026:** Ferrochromium - Specification (Third Revision)
* **IS 13230: 2026:** Graphical Symbols for Use on Mine Plans (First Revision)
* **IS 19316 (Part 2): 2026 (ISO 13105-2: 2023):** Building Construction Machinery and Equipment - Machinery for Concrete Surface Floating and Finishing - Part 2 Safety Requirements and Verification
* **IS 19455: 2026:** Gasket and Packing - Glossary of Terms
* **IS 19474: 2026:** Hot-dip Aluminium and Aluminium-Silicon Coated Steel Sheet and Strip - Specification
* **Withdrawal of Older Standards (July 5, 2026):**
* **IS 713-1981:** Specification for Zinc Base Alloy Ingots for Die Casting (Second Revision) - Replaced by IS 713: 2026
* **IS 1170: 1992:** Ferrochromium - Specification (Second Revision) - Replaced by IS 1170: 2026
* **IS 13230: 1992:** Graphical Symbols for Use on Mine Plans - Replaced by IS 13230: 2026
* **IS/ISO 13105-2: 2014:** Building Construction Machinery and Equipment-Machinery for Concrete Surface Floating and Finishing - Part 2 Safety Requirements and Verification - Replaced by IS 19316 (Part 2): 2026 (ISO 13105-2: 2023)
* **IS 19455: 2026** Gasket and Packing - Glossary of Terms and **IS 19474: 2026** Hot-dip Aluminium and Aluminium-Silicon Coated Steel Sheet and Strip - Specification have no standards withdrawn.
**Impact Analysis**
**Manufacturers and Suppliers of Zinc-Aluminium Alloy Ingots, Ferrochromium, Building Construction Machinery and Equipment, Gaskets, Packing Materials, and Aluminium-Coated Steel:**
* **Impact:** Need to comply with updated specifications and potentially adjust manufacturing processes.
* **Action Required:** Review new standards (IS 713: 2026, IS 1170: 2026, IS 19316 (Part 2): 2026 , IS 19455: 2026, IS 19474: 2026) and adapt their products and processes to meet the new requirements by July 5, 2026.
**Mining Industry:**
* **Impact:** Updated graphical symbols for use on mine plans.
* **Action Required:** Adopt updated graphical symbols as per IS 13230: 2026 by July 5, 2026.
**Testing and Certification Bodies:**
* **Impact:** Must update their testing and certification procedures to align with the new standards.
* **Action Required:** Update testing protocols and certification schemes to reflect the new standards (IS 713: 2026, IS 1170: 2026, IS 13230: 2026, IS 19316 (Part 2): 2026, IS 19455: 2026, IS 19474: 2026) by July 5, 2026.
**Consumers and End-Users:**
* **Impact:** Indirectly benefit from improved product quality and safety due to updated standards.
* **Action Required:** No direct action required. However, consumers should be aware of the updated standards when purchasing relevant products.
Key Entities Referenced
Bureau of Indian Standards (BIS): The primary regulator and standard-setting body, under the Department of Consumer Affairs, responsible for notifying Indian standards.
Indian Standards: Refers to the various standards established and revised by the Bureau of Indian Standards, covering specifications for materials, products, and processes.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-16012026-269379
xxxGIDHxxx
CG-DL-E-16012026-269379
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 41] नई दिल्ली, मगं लिार, िनिरी 13, 2026/पौर् 23, 1947
No. 41] NEW DELHI, TUESDAY, JANUARY 13, 2026/PAUSHA 23, 1947
भारतीय मानक ब् यरू ो
(उपभोक्त ा मामल े जिभाग)
अजधसूचना
नई दिल्ली, 12 िनिरी, 2026
संदर्भ: HQ-PUB013/1/2020-PUB-BIS (1400).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के उपजनयम (1)
के अनुसरण म ें भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के जििरण इसम ें संलग्न
अनूसूची के जद्वतीय स्ट्तंभ म ें दिये गय े हैं, तीसरे स्ट्तंभ म ें इंजगत जतजि को स्ट्िाजपत हो गय े ह|ैं चौिे स्ट्तंभ म ें दिय े गय े मानकों
के जििरण, यदि कोई हो तो िे भी साि-साि लाग ूरहगें े िब तक िे पााँचिें स्ट्तंभ में इंजगत जतजि को िापस जलए िान े ह|ैं
अनुसूची
क्रम स्ट्िाजपत भारतीय मानकों की संख्या, िर्ष प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस जलए िापस होने की
सं. जतजि
तिा िीर्षक िाने ह,ैं की संख्या, िर्ष तिा िीर्षक
(1) (2) (3) (4) (5)
1 आई एस 713 : 2026 05 िनिरी 2026 आई एस 713 – 1981 05 िुलाई
2026
फाउंड्री और डाई कासस्ट्टंग के जलए सिंक- डाई कासस्ट्टंग के जलए सिंक बेस अलॉय
एल्युमीजनयम जमश्रधातु इंगट — जिजिजि इनगॉट के जलए जिजिजि
277 GI/2026 (1)
12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
(तीसरा पुनरीक्षण) (िसू रा पुनरीक्षण)
2 आई एस 1170 : 2026 05 िनिरी 2026 आई एस 1170 : 1992 05 िुलाई
2026
फेरोक्रोजमयम — जिजिजि फेरोक्रोजमयम — जिजिजि
(िसू रा पुनरीक्षण)
(तीसरा पुनरीक्षण)
3 आई एस 13230 : 2026 05 िनिरी 2026 आई एस 13230 : 1992 05 िुलाई
2026
खान योिनाओं में उपयोग के जलए ग्राफीय खान योिनाओं में उपयोग के जलए
प्रतीक ग्राफीय प्रतीक
(पहला पुनरीक्षण)
4 आई एस 19316 (भाग 2) : 2026 05 िनिरी 2026 आई एस/आई एस ओ 13105-2 : 05 िुलाई
2026
आई एस ओ 13105-2 : 2023 2014
भिन जनमाषण मिीनें एिं उपकरण — भिन जनमाषण मिीनरी तिा उपस्ट्कर
कंक्रीट सरफेस फलोटटंग एिं दफजनसिंग के —
जलए मिीनरी कंक्रीट सतह फलोंटटंग तिा
भाग 2 सुरक्षा अपेक्षाएाँ एिं सत्यापन दफजनसिंग मिीनरी
भाग 2 सुरक्षा अपेक्षाएं तिा सत्यापन
5 आई एस 19455 : 2026 05 िनिरी 2026 लाग ूनहीं लागू नहीं
गास्ट्केट और पैककंग — पाररभाजर्क
िब्िािली
6 आई एस 19474 : 2026 05 िनिरी 2026 लागू नहीं लाग ूनहीं
तप्त-जनमज्जी एल्यमु ीजनयम और
एल्युमीजनयम-जसजलकॉन लेजपत इस्ट्पात की
चद्दर एिं पत्ती — जिजिजि
जचत्रा गुप्ता , िैज्ञाजनक िी एिं उप महाजनििे क (हॉलमार्किंग एिं रेसनगं )
[जिज्ञापन- III/4/असा./615/2025-26]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 12th January, 2026
Ref: HQ-PUB013/1/2020-PUB-BIS (1400).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
which are given in the second column of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withsdrawn on the te indicated against them in the fifth column.
SCHEDULE
Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Indian Date of
No. Standards Established Establishment Standards to be Withdrawn, if Withdrawal
any
(1) (2) (3) (4) (5)
1 IS 713 : 2026 05 January 2026 IS 713 – 1981 05 July 2026
Zinc-Aluminium Alloy Ingots Specification for Zinc Base Alloy
Intended for Foundry and Die Ingots for Die Casting
Castings — Specification (Second Revision)
(Third Revision)
2 IS 1170 : 2026 05 January 2026 IS 1170 : 1992 05 July 2026
Ferrochromium — Specification Ferrochromium — Specification
(Third Revision)
(Second Revision)
3 IS 13230 : 2026 05 January 2026 IS 13230 : 1992 05 July 2026
Graphical Symbols for Use on Mine Graphical Symbols for Use on
Plans Mine Plans
(First Revision)
4 IS 19316 (Part 2) : 2026 05 January 2026 IS/ISO 13105-2 : 2014 05 July 2026
ISO 13105-2 : 2023 Building Construction Machinery
Building Construction Machinery and Equipment — Machinery for
and Equipment — Machinery for Concrete Surface Floating and
Concrete Surface Floating and Finishing
Finishing Part 2 Safety Requirements and
Part 2 Safety Requirements and Verification
Verification
5 IS 19455 : 2026 05 January 2026 NA NA
Gasket and Packing — Glossary of
Terms
6 IS 19474 : 2026 05 January 2026 NA NA
Hot-dip Aluminium and
Aluminium-Silicon Coated Steel
Sheet and Strip — Specification
CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training)
[ADVT.-III/4/Exty./615/2025-26]
SUploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.