Date: 2022-10-11Category: Extra OrdinaryState: Union GovernmentCountry: India
In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column
## Policy Analysis Report: Notifications Regarding Indian Standards (October 6, 2022)
**1. Executive Summary:**
This report analyzes four notifications issued by the Bureau of Indian Standards (BIS) on October 6, 2022, pertaining to the establishment and amendment of Indian Standards. These notifications concern diverse sectors, including textiles, agricultural tractors, tools for pressing, plain bearings, automation systems, textiles, and polymer packaging. The primary purpose of these notifications is to ensure quality and standardization within these industries. The report highlights key provisions, targeted stakeholders, implementation aspects, and the expected outcomes of these policy changes.
**2. Introduction:**
This report provides an informative overview of four notifications published by the Bureau of Indian Standards (BIS) on October 6, 2022. The analysis is based solely on the provided text of the notifications. The purpose of this report is to inform stakeholders about the new and revised Indian Standards.
**3. Policy Overview:**
The document presents a series of notifications, each establishing or amending specific Indian Standards:
* **Notification 1 (Ref: HQPUB01312020PUBBIS412):** Establishes revised standards for textile dyestuffs and agricultural tractors while concurrently keeping the older standard in force until their withdrawal.
* **Notification 2 (Ref: HQPUB01312020PUBBIS413):** Establishes new standards for tools for pressing guide pillars, compression springs, earth core rockfill dams, textile pillow covers, and polyethylene packaging bags. It withdraws previous standards concurrently until the withdrawal date.
* **Notification 3 (Ref: HQPUB01312020PUBBIS414):** Establishes standards for plain bearing and automation systems while concurrently keeping the older standards in force until their withdrawal.
* **Notification 4 (Ref: HQPUB01312020PUBBIS415):** This is a corrigendum to a previous notification.
**Core Objective(s):**
* To establish and update Indian Standards to ensure quality, safety, and efficiency in various sectors.
* To align Indian Standards with international standards (ISO), where applicable.
**4. Background and Rationale:**
The notifications suggest a continuous effort by the BIS to revise and update existing standards to reflect advancements in technology, changes in industry practices, and alignment with international norms.
**5. Key Provisions / Changes:**
This section outlines the key changes implemented by the notifications.
* **Notification 1 (Ref: HQPUB01312020PUBBIS412):** Establishes revised standards for textile dyestuffs and agricultural tractors while concurrently keeping the older standard in force until their withdrawal.
* **IS 12149:2022:** Establishes the first revision of methods for determining the strength of disperse dyes for polyester by exhaust dyeing. IS 12149:1987 remains in force until Nov 2022
* **IS 12207:2022:** Establishes the fifth revision of recommendations on selected performance characteristics of agricultural tractors. IS 12207:2019 remains in force until Nov 2022
* **IS 14334:2022:** Establishes the first revision for textile determination of dusting behavior of dyes. IS 14334:1996 remains in force until Nov 2022.
* **Notification 2 (Ref: HQPUB01312020PUBBIS413):**
* **IS 15424 Part 5:2022:** Establishes the second revision for tools for pressing guide pillars. IS 15424 Part 5:2018 remains in force until Oct 28, 2022
* **IS 16796:2022:** Establishes the first revision for tools for pressing compression springs. IS 16796:2018 remains in force until Oct 28, 2022
* **IS 17837:2022:** Establishes a standard for the Junction of Earth Earth Core Rockfill Dam with Spillway , Non Overflow NOF Dam , Foundation and Outlets Guidelines
* **IS 17906:2022:** Establishes a standard for textiles cotton khadi pillow covers, bleached or dyed specification
* **IS 17931:2022:** Establishes a standard for Form Fill Seal Bags Made from Polyethylene for Packaging of Polymer Materials Specification
* **Notification 3 (Ref: HQPUB01312020PUBBIS414):**
* **IS 4774 Part 3:2022:** Establishes a standard for Plain Bearing ThinWalled Half Bearing with or without Flange Part 3 Measurement of Peripheral Length. IS 4773 Part 3:2021 remains in force until Nov 3, 2022.
* **IS 14803 Part 1:2022:** Establishes the first revision for Plain Bearings Part 1 Fits. IS 14803 Part 1:2000 remains in force until Nov 3, 2022.
* **IS 15625:2022:** Establishes the first revision for Plain Bearings Lubrication Holes. IS 15625:2005 remains in force until Nov 3, 2022.
* **IS 17885 Part 2:2022:** Establishes a standard for Automation Systems and Integration Digital Twin Framework for Manufacturing Part 2 Reference Architecture.
* **IS 17885 Part 3:2022:** Establishes a standard for Automation Systems and Integration Digital Twin Framework for Manufacturing Part 3 Digital Representation of Manufacturing Elements.
* **IS 17885 Part 4:2022:** Establishes a standard for Automation Systems and Integration Digital Twin Framework for Manufacturing Part 4 Information Exchange.
* **Notification 4 (Ref: HQPUB01312020PUBBIS415):**
* **Amendment:** Corrects the withdrawal date for IS 16333 Part 3:2017 from August 17, 2022, to December 17, 2022. This specific amendment directly changes the time frame during which the older standard remains valid, providing an extended period for compliance with the new standard or for utilizing existing stock/processes compliant with the older standard.
**6. Target Audience and Stakeholders:**
* **Notification 1:** Textile dyestuff manufacturers and users, agricultural tractor manufacturers and users.
* **Notification 2:** Manufacturers of tools for pressing guide pillars, springs, dam construction companies, textile manufacturers, and polymer packaging manufacturers.
* **Notification 3:** Plain bearing manufacturers and users, companies involved in automation and manufacturing.
* **Notification 4:** Manufacturers and users of IS 16333 Part 3 : 2017.
**7. Implementation Aspects (Inferred):**
* **Responsible Agency:** Bureau of Indian Standards (BIS).
* **Timelines:** The notifications specify the dates of establishment for new standards and the dates of withdrawal for superseded standards. All older standards listed within the notifications remain in effect concurrently until the withdrawal date is reached. Notification 4 extends the time for users of IS 16333 Part 3: 2017.
* **Access to Standards:** Copies of the standards are available for purchase at BIS offices and can be downloaded online from http://www.standardsbis.in.
**8. Expected Outcomes / Impact of Changes:**
* **Notifications 1,2,3:** The implementation of these standards is expected to improve the quality, performance, and safety of products in the respective sectors. The adoption of updated standards would promote best practices.
* **Notification 4:** The correction of the withdrawal date ensures that users of IS 16333 Part 3 : 2017 are given adequate time to transition to new standards.
**9. Conclusion:**
The notifications issued by the BIS on October 6, 2022, reflect ongoing efforts to maintain and improve Indian Standards across various industries. These standards impact stakeholders across the manufacturing and engineering sectors, ultimately aiming to enhance product quality, safety, and alignment with global best practices.
Key Entities Referenced
Bureau of Indian Standards: An organization that establishes and notifies Indian standards.
Bureau of Indian Standards Rules, 2018: A set of rules governing the Bureau of Indian Standards.
Indian Standards: Standards established and notified by the Bureau of Indian Standards.
Department of Consumer Affairs: A department of the Government of India, under the Ministry of Consumer Affairs, Food and Public Distribution.
Ministry of Consumer Affairs, Food and Public Distribution: The government ministry to which the Department of Consumer Affairs belongs.
New Delhi: Location where the notifications are issued; also location of Bureau of Indian Standards, Manak Bhavan, New Delhi.
Kolkata, West Bengal: Regional Office of Bureau of Indian Standards.
Chandigarh: Regional Office of Bureau of Indian Standards.
Chennai, Tamil Nadu: Regional Office of Bureau of Indian Standards.
Mumbai, Maharashtra: Regional Office of Bureau of Indian Standards.
Ahmedabad, Gujarat: Branch Office of Bureau of Indian Standards.
Bengaluru, Karnataka: Branch Office of Bureau of Indian Standards.
Bhopal, Madhya Pradesh: Branch Office of Bureau of Indian Standards.
Bhubaneshwar, Odisha: Branch Office of Bureau of Indian Standards.
Coimbatore, Tamil Nadu: Branch Office of Bureau of Indian Standards.
Dehradun, Uttarakhand: Branch Office of Bureau of Indian Standards.
Faridabad, Haryana: Branch Office of Bureau of Indian Standards.
Ghaziabad, Uttar Pradesh: Branch Office of Bureau of Indian Standards.
Guwahati, Assam: Branch Office of Bureau of Indian Standards.
Hyderabad, Telangana: Branch Office of Bureau of Indian Standards.
Jaipur, Rajasthan: Branch Office of Bureau of Indian Standards.
Jammu, Jammu and Kashmir: Branch Office of Bureau of Indian Standards.
Jamshedpur, Jharkhand: Branch Office of Bureau of Indian Standards.
Lucknow, Uttar Pradesh: Branch Office of Bureau of Indian Standards.
Nagpur, Maharashtra: Branch Office of Bureau of Indian Standards.
Parwanoo, Himachal Pradesh: Branch Office of Bureau of Indian Standards.
Patna, Bihar: Branch Office of Bureau of Indian Standards.
Pune, Maharashtra: Branch Office of Bureau of Indian Standards.
Raipur, Chhattisgarh: Branch Office of Bureau of Indian Standards.
Rajkot, Gujarat: Branch Office of Bureau of Indian Standards.
Kochi, Kerala: Branch Office of Bureau of Indian Standards.
Vishakhapatanam, Andhra Pradesh: Branch Office of Bureau of Indian Standards.
Rajeev Sharma: Scientist F DDG Standardization.
IS 16333 Part 3 : 2017: Indian Standard
रजजस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
xxxGIDHxxx
सी.जी.-डी.एxलxx.-GअID.-E1x2x1x0 2022-239577
CG-DL-E-12102022-239577
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 504] नई ददल्ली, मगं लिार, अक्त बू र 11, 2022/आजि न 19, 1944
No. 504] NEW DELHI, TUESDAY, OCTOBER 11, 2022/ASVINA 19, 1944
भारतीय मानक ब य् रू ो
(उपभोक्त ा मामल े जिभाग)
अजधसचू ना
नई ददल् ली, 6 अक् तूबर, 2022
फा. स.ं सदं भ:भ HQ-PUB013/1/2020-PUB-BIS(412).—भारतीय मानक ब्यरू ो जनयम, 2018 के
जनयम 15 के उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यरू ो एतदद्वारा अजधसूजचत करता ह ै की जजन भारतीय मानकों
के जििरण इसमें सलं ग्न अनुसूची के जद्वतीय स्ट्तंभ म ें ददये गय े हैं, तीसरे स्ट्तंभ म ें इंजगत जतजथ को स्ट्थाजपत हो गये ह|ैं चौथ े
स्ट्तंभ में ददये गय े मानकों के जििरण, यदद कोई हो तो िे भी साथ-साथ लागू रहगें े जब तक िे पााँचिें स्ट्तंभ में इंजगत जतजथ
को िापस जलए जान े ह|ैं
अनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्थापन भारतीय मानकों, यदद िापस जलए िापस होन े की
स.ं जतजथ जतजथ
िर् भ तथा िीर्कभ जान े ह,ैं की सख्ं या, िर् भ तथा िीर्कभ
(1) (2) (3) (4) (5)
1 आई एस 12149 : 2022 3 अक्टूबर आई एस 12149 : 1987 3 निम्बर
िस्त्र रंजक सामग्री – एग्ज्हौस्ट्ट रंगाई 2022 एग्ज्हौस्ट्ट रंगाई द्वारा पॉजलएस्ट्टर के 2022
जलय े जडस्ट्पस भ रंजको की तीव्रता के
द्वारा पॉजलएस्ट्टर के जलये जडस्ट्पसभ रंजको
जनधाभरण की जिधी
की तीव्रता के जनधरभ ण की जिधी
(पहला पुनरीक्षण)
6877 GI/2022 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
2 आई एस 12207 : 2022 3 अक्टूबर आई एस 12207 :2019 3 निम्बर
कृजर् रैक्टर – चुन े हुए कायभकाररता 2022 कृजर् रैक्टर – चुन े हुए कायभकाररता 2022
मापदडो की मापदडो की अनुिंसाए ाँ
अनुिंसाए ाँ (चौथा पनु रीक्षण)
(पााँचिा पुनरीक्षण)
3 आई एस 14334 : 2022 3 अक्टूबर आई एस 14334 : 1996 3 निम्बर
िस्त्र रंजक सामग्री – रंजको की 2022 िस्त्र रंजक पदाथ भ – रंजको के 2022
धुजलमाजभन व्यिहार का जनधाभरण प्रकीणभन व्यिहार का ज्ञात करना
( पहला पनु रीक्षण )
इन मानकों म ें संिोधनों की प्रजतयााँ भारतीय मानक ब्यरू ो, मानक भिन, 9 बहादरु िाह ज़फर माग,भ नई ददल्ली 110 002,
क्षेत्रीय कायाभलयों: कोलकाता, चंडीगढ़, चेन्नई, मुम्बई तथा िाखा कायाभलयों : अहमदाबाद, बेंगलरुु , भोपाल, भुबनेश्वर,
कोयम्बटूर, देहरादनू , फरीदाबाद, गाजज़याबाद, गिु ाहाटी, हदै राबाद, जयपुर, जम्मु, जमिेदपरु , लखनऊ, नागपरु , परिान,ू
पटना, पुण,े रायपुर, राजकोट, कोजि, जििाखापटनम म ें जबक्री हते ु उप्लब्ध ह.ैं भारतीय मानकों म ें संिोधनों को
http://www.standardsbis.in पर आनलाईन खरीदा/ डाउनलोड दकया जा सकता ह|ै
राजीि िमा,भ िैज्ञाजनक एफ एि ं उपमहाजनदेिक (मानकीकरण-I)
[जिज्ञापन-III/4/असा./325/2022-23]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 6th October, 2022
F. No. Ref: HQ-PUB013/1/2020-PUB-BIS(412).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau
of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
which are given in the secondcolumn of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
Sl No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be withdrawal
withdrawn, if any
(1) (2) (3) (4) (5)
1 IS 12149 :2022 3 Oct 2022 IS 12149 :1987 3 Nov 2022
Textile Dyestuffs – Methods for Methods for Determination
Determination of Strength Disperse Dyes for
of Strength Disperse Dyes for Polyester Polyester by Exhaust Dyeing
by Exhaust Dyeing
( First Revision )
2 IS 12207 :2022 3 Oct 2022 IS 12207 :2019 3 Nov 2022
Agricultural Tractors – Recommendations Agricultural Tractors –
on Selectad Performance Characteristics Recommendations on
( Fifth Revision ) Selectad Performance
Characteristics
( Fourth Revision )
3 IS 14334 :2022 3 Oct 2022 IS 14334 :1996 3 Nov 2022
Textile Determination of Dusting Textile Dyestuffs -
Behaviour of Dyes Determination of Dusting
( First Revision ) Behaviour of Dyes[भाग III—खण् ड 4] भारत का राजपत्र : असाधारण 3
Copies of these amendments to standards are available for sale with Bureau of Indian Standards, Manak Bhavan,
9 Bahadur Shah Zafar Marg, New Delhi – 110 002; Regional Offices: Kolkata, Chandigarh, Chennai, Mumbai and
Branch Offices: Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore, Dehradun, Faridabad, Ghaziabad,
Guwahati, Hyderabad, Jaipur, Jammu, Jamshedpur, Lucknow, Nagpur, Parwanoo, Patna, Pune, Raipur, Rajkot, Kochi,
Vishakhapatanam. Online purchase/downloading of amendments to Indian Standards can be made at
http://www.standardsbis.in.
RAJEEV SHARMA, Scientist F & DDG (Standardization-I)
[ADVT.-III/4/Exty./325/2022-23]
अजधसचू ना
नई ददल ल् ी, 6 अक् तूबर, 2022
फा. स.ं सदं भ:भ HQ-PUB013/1/2020-PUB-BIS(413).—भारतीय मानक ब्यूरो जनयम, 2018 के
जनयम 15 के उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यरू ो एतदद्वारा अजधसूजचत करता ह ैकी जजन भारतीय मानकों
के जििरण इसम ें संलग्न अनुसूची के जद्वतीय स्ट्तंभ म ें ददय े गय े ह,ैं तीसरे स्ट्तंभ म ें इंजगत जतजथ को स्ट्थाजपत हो गय े ह|ैं चौथ े
स्ट्तंभ म ें ददय े गय े मानकों के जििरण, यदद कोई हो तो िे भी साथ-साथ लागू रहगें े जब तक िे पााँचिें स्ट्तंभ म ें इंजगत जतजथ
को िापस जलए जान े ह ैं|
अनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्थापन जतजथ भारतीय मानकों, यदद िापस िापस होन े की
स.ं जतजथ
िर् भ तथा िीर्कभ जलए जान े ह,ैं की सख्ं या, िर् भ
तथा िीर्कभ
(1) (2) (3) (4) (5)
1 आई एस 15424 ( भाग 5 ) : 2022/ 28 जसतम्बर 2022 आई एस 15424 ( भाग 5 ) 28 अक्टूबर
आई एस ओ 9182 – 5 : 2020 : 2018/ आई एस ओ 9182 2022
दाब हते ु औजार – गाइड स्ट्तम्भ – 5 : 2013
भाग 5 टाइप डी, फ्लैंज सजहत एंड- दाब हते ु औजार – गाईड
लाककग स्ट्तम्भ स्ट्तम्भ
(दसू रा पुनरीक्षण) भाग 5 टाइप डी, फ्लैंज
सजहत एंड-लाककग स्ट्तम्भ
(पहला पुनरीक्षण)
2 आई एस 16796 : 2022/आई एस ओ 28 जसतम्बर 2022 आई एस 16796 : 28 अक्टूबर
10243 : 2019 2018/आई एस ओ 10243 : 2022
दाबन के औजार – आयताकार खंड 2010
िाले संपीड̣न दाबन के औजार –
स्प्स्ट्प्रग – आिास आयाम और रंग संजहता आयताकार खडं िाल े संजपड̣न
(पहला पुनरीक्षण) स्प्स्ट्प्रग – आिास आयाम और
रंग संजहता
3 आई एस 17837 : 2022 28 जसतम्बर 2022 लाग ू नही लाग ू नही
उत्पप्लि, गरै अजतप्रिाही ( एन.ओ.एफ.)
बांध,नींिऔर बजहगभम मागो का
मृदा/मृदा-िैल बांधों के साथ संजधस्ट्थल
– ददिा जनदिे4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
आई एस 17906 : 2022 28 जसतम्बर 2022 लाग ू नही लाग ू नही
4 िस्त्रादद – सूती खादी तदकय े के जगलाफ,
जिरंजजत ि रंगीन – जिजिजि
5 आई एस 17931 : 2022 28 जसतम्बर 2022 लाग ू नही लाग ू नही
पॉजलमर सामग्री की पैकेस्प्जग के जलए
पोलीइथाइलीन स े बने फॉमभ दफल सील
बैग - जिजिजि
इन मानकों म ें संिोधनों की प्रजतयााँ भारतीय मानक ब्यरू ो, मानक भिन, 9 बहादरु िाह ज़फर माग,भ नई ददल्ली 110 002,
क्षेत्रीय कायाभलयों: कोलकाता, चंडीगढ़, चेन्नई, मुम्बई तथा िाखा कायाभलयों : अहमदाबाद, बेंगलरुु , भोपाल, भुबनेश्वर,
कोयम्बटूर, देहरादनू , फरीदाबाद, गाजज़याबाद, गिु ाहाटी, हदै राबाद, जयपुर, जम्मु, जमिेदपरु , लखनऊ, नागपरु , परिान,ू
पटना, पुण,े रायपुर, राजकोट, कोजि, जििाखापटनम म ें जबक्री हते ु उप्लब्ध ह.ैं भारतीय मानकों म ें संिोधनों को
http://www.standardsbis.in पर आनलाईन खरीदा/ डाउनलोड दकया जा सकता ह|ै
राजीि िमा,भ िैज्ञाजनक एफ एि ं उपमहाजनदेिक (मानकीकरण-I)
[जिज्ञापन-III/4/असा./325/2022-23]
NOTIFICATION
New Delhi, the 6th October, 2022
F. No. Ref: HQ-PUB013/1/2020-PUB-BIS(413).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau
of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
which are given in the second column of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
Sl No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be withdrawal
withdrawn, if any
(1) (2) (3) (4) (5)
1 IS 15424 (Part 5) : 2022/ ISO 9182- 5 : 28 Sept 2022 IS 15424 (Part 5) : 2018/ ISO 28 Oct 2022
2020 9182- 5 : 2013
Tools for Pressing – Guide Pillars Tools for Pressing – Guide
Part 5 Type D , End- Locking Pillars Pillars
with Flange Part 5 Type D , End- Locking
( Second Revision ) Pillars with Flange
(First Revision )
2 IS 16796 : 2022 /ISO 10243 : 2019 28 Sept 2022 IS 16796 : 2018 /ISO 10243 : 28 Oct 2022
Tools for Pressing – Compression 2010
Springs with Rectangular Section – Tools for Pressing –
Housing Dimensions and Colour Coding Compression Springs with
( First Revision ) Rectangular Section –
Housing Dimensions and
Colour Coding
3 IS 17837 : 2022 28 Sept 2022 NA NA
Junction of Earth / Earth Core Rockfill
Dam with Spillway , Non- Overflow
(NOF) Dam , Foundation and Outlets -
Guidelines
4 IS 17906 : 2022 28 Sept 2022 NA NA
Textiles – Cotton Khadi Pillow Covers ,
Bleached or Dyed - Specification[भाग III—खण् ड 4] भारत का राजपत्र : असाधारण 5
5 IS 17931 : 2022 28 Sept 2022 NA NA
Form Fill Seal Bags Made from
Polyethylene for Packaging of Polymer
Materials -Specification
Copies of these amendments to standards are available for sale with Bureau of Indian Standards, Manak Bhavan,
9 Bahadur Shah Zafar Marg, New Delhi – 110 002; Regional Offices: Kolkata, Chandigarh, Chennai, Mumbai and
Branch Offices: Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore, Dehradun, Faridabad, Ghaziabad,
Guwahati, Hyderabad, Jaipur, Jammu, Jamshedpur, Lucknow, Nagpur, Parwanoo, Patna, Pune, Raipur, Rajkot, Kochi,
Vishakhapatanam. Online purchase/downloading of amendments to Indian Standards can be made at
http://www.standardsbis.in.
RAJEEV SHARMA, Scientist F & DDG (Standardization-I)
[ADVT.-III/4/Exty./325/2022-23]
अजधसचू ना
नई ददल् ली, 6 अक् तूबर, 2022
फा. स.ं संदभ:भ HQ-PUB013/1/2020-PUB-BIS(414).— भारतीय मानक ब्यरू ो जनयम, 2018 के जनयम 15
के उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यरू ो एतदद्वारा अजधसूजचत करता ह ै की जजन भारतीय मानकों के जििरण
इसम ें संलग्न अनूसूची के जद्वतीय स्ट्तंभ म ें ददय े गय े ह,ैं तीसरे स्ट्तभं म ें इंजगत जतजथ को स्ट्थाजपत हो गय े ह|ैं चौथे स्ट्तंभ म ें ददय े
गय े मानकों के जििरण, यदद कोई हो तो ि े भी साथ-साथ लाग ू रहगें े जब तक ि े पााँचि ें स्ट्तंभ में इंजगत जतजथ को िापस जलए
जाने ह ैं|
अनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, प्रजतस्ट्थापन जतजथ भारतीय मानकों, यदद िापस होन े की
स.ं िर् भ तथा िीर्कभ िापस जलए जान ेह,ैं की जतजथ
सख्ं या, िर् भ तथा िीर्कभ
(1) (2) (3) (4) (5)
1 आई एस 4774 (भाग 3) : 2022/आई 3 अक्टूबर 2022 आई एस 4773 (भाग 3) : 3 निम्बर 2022
एस ओ 3548-3 : 2012 2021/आई एस ओ 3548-
प्लेन बेयररग ─ फ्लन्ै ज या जबना फ्लन्ै ज 3 : 2012
के पतली दीिार िाल ेआधे बेयररग प्लेन बेयररग ─ फ्लैज सजहत
भाग 3 पररजध लम्बाई का मापन या रजहत थीन-िाल्ड हॉफ
बेयररग
भाग 3 पररजध लम्बाई का
माप
2 आई एस 14803 (भाग 1) : 2022/आई 3 अक्टूबर 2022 आई एस 14803 (भाग 1) 3 निम्बर 2022
एस ओ 12129-1 : 2019 : 2000/आई एस ओ
प्लेन बेयररग ─ छूटें 12129-1 : 1995
भाग 1 दफट सादे बेयररग
(पहला पुनरीक्षण) भाग 1 उपयुक्तताऐं
3 आई एस 15625 : 2022/आई एस ओ 3 अक्टूबर 2022 आई एस 15625 : 3 निम्बर 2022
12128 : 2020 2005/आई एस ओ
प्लेन बेयररग ─ स्नेहन जछद्र, खााँचे और 12128 : 2001
पॉकेट ─ आयाम, प्रकार, अजभनाम और सादे बेयररग ─ स्नेहन जछद्र,
बेयररग बुि के जलए इनके प्रयोग खााँचे और पॉकेट ─ आयाम,
(पहला पुनरीक्षण) टाईप, अजभनाम और
बेयररग बुि के जलए इनके
अनुप्रयोग6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
4 आई एस 17885 (भाग 2) : 2022/आई 3 अक्टूबर 2022 लाग ू नहीं लाग ूनहीं
एस ओ 23247-2 : 2021
स्ट्िचालन प्रणाली और एकीकरण ─
उत्पपादन के जलए अंकीय जड़ु िां ढााँचा
भाग 2 संदभभ िास्ट्तुकला
5 आई एस 17885 (भाग 3) : 2022/आई 3 अक्टूबर 2022 लाग ू नहीं लाग ू नहीं
एस ओ 23247-3 : 2021
स्ट्िचालन प्रणाली और एकीकरण ─
उत्पपादन के जलए अंकीय जड़ु िां ढााँचा
भाग 3 उत्पपादन तत्पिों का अंकीय
जनरूपण
6 आई एस 17885 (भाग 4) : 2022/आई 3 अक्टूबर 2022 लाग ू नहीं लाग ू नहीं
एस ओ 23247-4 : 2021
स्ट्िचालन प्रणाली और एकीकरण ─
उत्पपादन के जलए अंकीय जड़ु िां ढााँचा
भाग 4 सूचना का आदान प्रदान
इन मानकों म ें संिोधनों की प्रजतयााँ भारतीय मानक ब्यरू ो, मानक भिन, 9 बहादरु िाह ज़फर माग,भ नई ददल्ली 110 002,
क्षेत्रीय कायाभलयों: कोलकाता, चंडीगढ़, चेन्नई, मुम्बई तथा िाखा कायाभलयों : अहमदाबाद, बेंगलरुु , भोपाल, भुबनेश्वर,
कोयम्बटूर, देहरादनू , फरीदाबाद, गाजज़याबाद, गिु ाहाटी, हदै राबाद, जयपुर, जम्मु, जमिेदपरु , लखनऊ, नागपरु , परिान,ू
पटना, पुण,े रायपुर, राजकोट, कोजि, जििाखापटनम म ें जबक्री हते ु उप्लब्ध ह.ैं भारतीय मानकों म ें संिोधनों को
http://www.standardsbis.in पर आनलाईन खरीदा/ डाउनलोड दकया जा सकता ह|ै
राजीि िमा,भ िैज्ञाजनक एफ एि ं उपमहाजनदेिक (मानकीकरण-I)
[जिज्ञापन-III/4/असा./325/2022-23]
NOTIFICATION
New Delhi, the 6th October, 2022
F. No. Ref: HQ-PUB013/1/2020-PUB-BIS(414).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau
of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
which are given in the second column of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.
SCHEDULE
Sl No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be withdrawal
withdrawn, if any
(1) (2) (3) (4) (5)
1 IS 4774 (Part 3) : 2022/ISO 3548-3 : 3 Oct 2022 IS 4773 (Part 3) : 2021/ISO 3 Nov 2022
2012 3548-3 : 2012
Plain Bearing ─ Thin-Walled Half Plain Bearing ─ Thin-Walled
Bearing with or without Flange Half Bearing with or without
Part 3 Measurement of Peripheral Length Flange
Part 3 Measurement of
Peripheral Length[भाग III—खण् ड 4] भारत का राजपत्र : असाधारण 7
2 IS 14803 (Part 1) : 2022/ISO 12129-1 : 3 Oct 2022 IS 14803 (Part 1) : 2000/ISO 3 Nov 2022
2019 12129-1 : 1995
Plain Bearings ─ Tolerances Plain Bearings
Part 1 Fits Part 1 Fits
(First Revision)
3 IS 15625 : 2022/ISO 12128 : 2020 3 Oct 2022 IS 15625 : 2005/ISO 12128 : 3 Nov 2022
Plain Bearings ─ Lubrication Holes, 2001
Grooves and Pockets ─ Dimensions, Plain Bearings ─ Lubrication
Types, Designation and Their Holes, Grooves and Pockets ─
Application to Bearing Bushes Dimensions, Types,
(First Revision) Designation and Their
Application to Bearing Bushes
4 IS 17885 (Part 2) : 2022/ISO 23247-2 : 3 Oct 2022 NA NA
2021
Automation Systems and Integration ─
Digital Twin Framework for
Manufacturing
Part 2 Reference Architecture
5 IS 17885 (Part 3) : 2022/ISO 23247-3 : 3 Oct 2022 NA NA
2021
Automation Systems and Integration ─
Digital Twin Framework for
Manufacturing
Part 3 Digital Representation of
Manufacturing Elements
6 IS 17885 (Part 4) : 2022/ISO 23247-4 : 3 Oct 2022 NA NA
2021
Automation Systems and Integration ─
Digital Twin Framework for
Manufacturing
Part 4 Information Exchange
Copies of these amendments to standards are available for sale with Bureau of Indian Standards, Manak Bhavan,
9 Bahadur Shah Zafar Marg, New Delhi – 110 002; Regional Offices: Kolkata, Chandigarh, Chennai, Mumbai and
Branch Offices: Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore, Dehradun, Faridabad, Ghaziabad,
Guwahati, Hyderabad, Jaipur, Jammu, Jamshedpur, Lucknow, Nagpur, Parwanoo, Patna, Pune, Raipur, Rajkot, Kochi,
Vishakhapatanam. Online purchase/downloading of amendments to Indian Standards can be made at
http://www.standardsbis.in.
RAJEEV SHARMA, Scientist F & DDG (Standardization-I)
[ADVT.-III/4/Exty./325/2022-23]
िजु िपत्र
नई ददल् ली, 6 अक् तूबर, 2022
फा. स.ं सदं भ:भ HQ-PUB013/1/2020-PUB-BIS (415).—भारतीय मानक ब्यरू ो एतदद्वारा भारत के राजपत्र
में जनचे ददए गए सन्दभों में भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के उपजनयम (1) के अनुसरण में भारत के
राजपत्र भाग III, खंड 4 म ें 20 जुलाई 2022 को प्रकाजित भारतीय मानक ब्यूरो उपभोक्त ा मामले, खाद्य एि ं सािभजजनक
जितरण मंत्रालय, उपभोक्त ा मामले जिभाग के अंतगभत भारत सरकार की अजधसूचनाओं म ेंजनम्नजलजखत सिं ोधन करता ह:ै
भारतीय मानक ब्यरू ो एतद्द्वारा भारत के राजपत्र म ें संदभ:भ HQ-PUB 013/1/2020 Pub-BIS (377) ददनांक 19 जुलाई
2022:
आई एस 16333 (भाग 3) : 2017 के िाजपस होने की जतजथ उपयुभक्त नोरटदफकेिन की अनुसचू ी के क्रम संख्या
26, कॉलम (5) म ें ─ ’17 अगस्ट्त 2022’ को ’17 ददसम्बर 2022’ स े प्रजतस्ट्थाजपत करें|
राजीि िमाभ, िैज्ञाजनक एफ एि ंउपमहाजनदेिक (मानकीकरण-I)
[जिज्ञापन-III/4/असा./325/2022-23]8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
CORRIGENDUM
New Delhi, the 6th October, 2022
F. No. Ref: HQ-PUB013/1/2020-PUB-BIS(415).—Bureau of Indian Standards hereby makes the following
AMENDMENT to the NOTIFICATION of Government of India under the Ministry of Consumer Affairs, Food and
Public Distribution (Department of Consumer Affairs) published on 20 July 2022 in Part III, Section 4 of the Gazette
of India in pursuance of sub-rule (1) of Rule 15 of the Bureau of Indian Standards Rules, 2018.
Extraordinary vide HQ-PUB 013/1/2020 Pub-BIS (377) dated 19 July 2022:
Sl No. 26, column (5) of the schedule of above notification ─ Substitute ‘17 Dec 2022’ for ‘17 Aug 2022’ as
date of withdrawal of IS 16333 (Part 3) : 2017.
RAJEEV SHARMA, Scientist F & DDG (Standardization-I)
[ADVT.-III/4/Exty./325/2022-23]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.