Home› India› Bureau of Indian Standards› In pursuance of Sub rule 1 of Rule 15 of the Bureau of India...
Date: 17-Nov-2023 Category: Extra Ordinary State: Union Government Country: India

In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been

Issued by Bureau of Indian Standards · Not Applicable

Research with AI Agent Chat with Document Generate Summary Translate Helpful Share Add to Project Create Task

Executive Summary & Key Takeaways

Gazette Notification

  • The Bureau of Indian Standards (BIS) has established new Indian Standards, as per the notification dated November 15, 2023.
  • These standards are effective from November 10, 2023.
  • The notification specifies the Indian Standards that have been established, along with any corresponding standards that will remain in force concurrently until withdrawn.

Key Changes

  • Nine new Indian Standards have been established and are effective from November 10, 2023.
  • IS 1367 (Part 14/Sec 4) : 2023/ISO 3506-4 : 2009, relating to technical supply conditions for threaded steel fasteners, Part 14 concerning mechanical properties of corrosion-resistant stainless steel fasteners, Section 4 on tapping screws, has been established.
  • IS 18462 : 2023, relating to Electronic Detonators, has been established.
  • IS 18471 (Part 1) : 2023/ISO 15481 : 1999, relating to fasteners – cross recessed drilling screws with tapping screw thread, Part 1 on pan head, has been established.
  • IS 18471 (Part 2) : 2023/ISO 15482 : 1999, relating to fasteners – cross recessed drilling screws with tapping screw thread, Part 2 on countersunk head, has been established.
  • IS 18471 (Part 3) : 2023/ISO 15483 : 1999, relating to fasteners – cross recessed drilling screws with tapping screw thread, Part 3 on raised countersunk head, has been established.
  • IS 18476 : 2023/ISO 15480 : 2019, relating to fasteners – hexagon washer head drilling screws with tapping screw thread, has been established.
  • IS 18480 (Part 1) : 2023/ISO 7049 : 2011, relating to cross recessed tapping screws, Part 1 on pan head, has been established.
  • IS 18480 (Part 2) : 2023/ISO 7050 : 2011, relating to cross recessed tapping screws, Part 2 on countersunk (flat) head, has been established.
  • IS 18480 (Part 3) : 2023/ISO 7051 : 2011, relating to cross recessed tapping screws, Part 3 on raised countersunk (oval) head, has been established.
  • No Indian Standards are being withdrawn as part of this notification.

Impact Analysis

Manufacturers of Fasteners and Electronic Detonators

  • Obtain necessary certifications from BIS to demonstrate adherence to the standards.

Consumers

  • Increased assurance of product reliability and performance.

Bureau of Indian Standards (BIS)

  • BIS will need to update its testing and certification procedures to reflect the new standards.

Government Agencies

  • Update procurement guidelines and specifications to include the new BIS standards.

Key Entities Referenced

Bureau of Indian Standards (BIS): The national standards body of India responsible for the formulation, recognition, and promotion of standards for goods and services. Indian Standards: A set of specifications and guidelines developed by the Bureau of Indian Standards to ensure the quality, safety, and reliability of products and services. IS 1367 (Part 14/Sec 4) : 2023/ISO 3506-4 : 2009: Indian Standard relating to technical supply conditions for threaded steel fasteners, Part 14 concerning mechanical properties of corrosion-resistant stainless steel fasteners, Section 4 on tapping screws. IS 18462 : 2023: Indian Standard relating to Electronic Detonators. IS 18471 (Part 1) : 2023/ISO 15481 : 1999: Indian Standard relating to fasteners – cross recessed drilling screws with tapping screw thread, Part 1 on pan head. IS 18471 (Part 2) : 2023/ISO 15482 : 1999: Indian Standard relating to fasteners – cross recessed drilling screws with tapping screw thread, Part 2 on countersunk head. IS 18471 (Part 3) : 2023/ISO 15483 : 1999: Indian Standard relating to fasteners – cross recessed drilling screws with tapping screw thread, Part 3 on raised countersunk head. IS 18476 : 2023/ISO 15480 : 2019: Indian Standard relating to fasteners – hexagon washer head drilling screws with tapping screw thread. IS 18480 (Part 1) : 2023/ISO 7049 : 2011: Indian Standard relating to cross recessed tapping screws, Part 1 on pan head. IS 18480 (Part 2) : 2023/ISO 7050 : 2011: Indian Standard relating to cross recessed tapping screws, Part 2 on countersunk (flat) head. IS 18480 (Part 3) : 2023/ISO 7051 : 2011: Indian Standard relating to cross recessed tapping screws, Part 3 on raised countersunk (oval) head.
Official Source Record View Original Source →
See Full Document Text
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99 सी.जी.-डी.एल.-अ.-18112023-250138 xxxGIDHxxx CG-DL-E-18112023-250138 xxxGIDExxx असाधारण EXTRAORDINARY भाग III—खण् ड 4 PART III—Section 4 प्राजधकार स ेप्रकाजित PUBLISHED BY AUTHORITY स.ं 767] नई दिल्ली, िुक्रिार, निम्ब र 17, 2023/कार्तकभ 26, 1945 No. 767] NEW DELHI, FRIDAY, NOVEMBER 17, 2023/KARTIKA 26, 1945 भारतीय मानक ब्य रू ो (उपभोक्त ा मामल े जि भाग) अजधसचू ना नई दिल्ली, 15 निम्बर, 2023 सिं भ:भ HQ-PUB013/1/2020-PUB-BIS (737).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतिद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के जििरण इसम ें संलग्न अनूसूची के जद्वतीय स्ट्तंभ म ें दिय े गय े ह,ैं तीसरे स्ट्तभं म ें इंजगत जतजि को स्ट्िाजपत हो गय े ह|ैं चौिे स्ट्तंभ में दिय े गय े मानकों के जििरण, यदि कोई हो तो ि े भी साि-साि लाग ू रहगें े िब तक ि े पााँचि ें स्ट्तंभ म ें इंजगत जतजि को िापस जलए िाने ह|ैं अनसु चू ी क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भतिा प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस जलए िान ेह,ैं िापस होन ेकी स.ं िीर्कभ की सख्ं या, िर् भतिा िीर्कभ जतजि (1) (2) (3) (4) (5) 1 आई एस 1367 (भाग 14/अनुभाग 4) : 10 निम्बर 2023 लागू नहीं लागू नहीं 2023/आई एस ओ 3506-4 : 2009 इस्ट्पात के चूड़ीिार फास्ट्टनसभ के जलए तकनीकी पूर्तभ िते भाग 14 िंगरोधी इस्ट्पात के फास्ट्टनसभ के यांजिक गुणधमभ 7230 GI/2023 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4] क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िर् भतिा प्रजतस्ट्िापन जतजि भारतीय मानकों, यदि िापस जलए िान ेह,ैं िापस होन ेकी स.ं िीर्कभ की सख्ं या, िर् भतिा िीर्कभ जतजि (1) (2) (3) (4) (5) अनुभाग 4 टैपपंग पेंच 2 आई एस 18462 : 2023 10 निम्बर 2023 लागू नहीं लागू नहीं इलेक्रॉजनक अजधस्ट्फोटकों — जिजिजि आई एस 18471 (भाग 1) : 2023/आई एस ओ 10 निम्बर 2023 लागू नहीं लाग ूनहीं 3 15481 : 1999 फास्ट्टनसभ — टैपपंग स्ट्क्रू थ्रेड के साि क्रॉस ररसेस्ट्ड जिपलंग स्ट्क्रू भाग 1 पैन हडै 4 आई एस 18471 (भाग 2) : 2023/आई एस ओ 10 निम्बर 2023 लागू नहीं लागू नहीं 15482 : 1999 फास्ट्टनसभ — टैपपंग स्ट्क्रू थ्रेड के साि क्रॉस ररसेस्ट्ड जिपलंग स्ट्क्रू भाग 2 काउंटरसंक हडै 5 आई एस 18471 (भाग 3) : 2023/आई एस ओ 10 निम्बर 2023 लागू नहीं लागू नहीं 15483 : 1999 फास्ट्टनसभ — टैपपंग स्ट्क्रू थ्रेड के साि क्रॉस ररसेस्ट्ड जिपलंग स्ट्क्रू भाग 3 उठे हुए काउंटरसंक हडै 6 आई एस 18476 : 2023/आई एस ओ 15480 10 निम्बर 2023 लागू नहीं लागू नहीं : 2019 फास्ट्टनसभ — टैपपंग स्ट्क्रू थ्रेड के साि र्ट्कोणीय िॉिर िीर्भ िाले जिपलंग स्ट्क्रू 7 आई एस 18480 (भाग 1) : 2023/आई एस ओ 10 निम्बर 2023 लागू नहीं लागू नहीं 7049 : 2011 क्रॉस ररसेस्ट्ड टैपपंग पेंच भाग 1 पैन हडै 8 आई एस 18480 (भाग 2) : 2023/आई एस ओ 10 निम्बर 2023 लागू नहीं लागू नहीं 7050 : 2011 क्रॉस ररसेस्ट्ड टैपपंग पेंच भाग 2 काउंटरसंक (चपटे) हडै 9 आई एस 18480 (भाग 3) : 2023/आई एस ओ 10 निम्बर 2023 लागू नहीं लागू नहीं 7051 : 2011 क्रॉस ररसेस्ट्ड टैपपंग पेंच भाग 3 उठे हुए काउंटरसंक (अंडाकार) हडै पी. रािेि, िैज्ञाजनक एफ एि ंउपमहाजनििे क (आई टी एस, पी आर टी , टी एन एम) [जिज्ञापन-III/4/असा./549/2023-24] BUREAU OF INDIAN STANDARDS (Department of Consumer Affairs) NOTIFICATION New Delhi, the 15th November, 2023 Ref: HQ-PUB013/1/2020-PUB-BIS (737).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column. The particulars of the standards, if any which are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.[भाग III—खण् ड 4] भारत का रािपि : असाधारण 3 SCHEDULE Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Date of No. Standards Established Establishment Indian Standards to be withdrawal withdrawn, if any (1) (2) (3) (4) (5) IS 1367 (Part 14/Sec 4) : 2023/ISO 3506-4 : 2009 Technical Supply Conditions for 10 November NA NA 1 Threaded Steel Fasteners 2023 Part 14 Mechanical Properties of Corrosion Resistant Stainless Steel Fasteners Section 4 Tapping Screws IS 18462 : 2023 10 November NA NA 2 Electronic Detonators — Specification 2023 IS 18471 (Part 1) : 2023/ISO 15481 : 1999 10 November NA NA 3 Fasteners — Cross Recessed Drilling 2023 Screws with Tapping Screw Thread Part 1 Pan Head IS 18471 (Part 2) : 2023/ISO 15482 : 1999 10 November NA NA 4 Fasteners — Cross Recessed Drilling 2023 Screws with Tapping Screw Thread Part 2 Countersunk Head IS 18471 (Part 3) : 2023/ISO 15483 : 1999 10 November NA NA 5 Fasteners — Cross Recessed Drilling 2023 Screws with Tapping Screw Thread Part 3 Raised Countersunk Head IS 18476 : 2023/ISO 15480 : 2019 10 November NA NA 6 Fasteners — Hexagon Washer Head 2023 Drilling Screws with Tapping Screw Thread IS 18480 (Part 1) : 2023/ISO 7049 : 2011 10 November NA NA 7 Cross Recessed Tapping Screws 2023 Part 1 Pan Head IS 18480 (Part 2) : 2023/ISO 7050 : 2011 10 November NA NA 8 Cross Recessed Tapping Screws 2023 Part 2 Countersunk (Flat) Head IS 18480 (Part 3) : 2023/ISO 7051 : 2011 10 November NA NA 9 Cross Recessed Tapping Screws 2023 Part 3 Raised Countersunk (Oval) Head P. RAJESH, Scientist F & DDG (ITS, PRT & TNM) [ADVT.-III/4/Exty./549/2023-24] Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064 and Published by the Controller of Publications, Delhi-110054.

Continue your research

Related Documents from Bureau of Indian Standards