In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against it in third column

## Report on Bureau of Indian Standards (BIS) Notification - October 6, 2022 **1. Executive Summary:** This report analyzes a notification issued by the Bureau of Indian Standards (BIS) on October 6, 2022. The notification pertains to the establishment and revision of various Indian Standards (IS) across different sectors. Key findings include the establishment of new standards related to graphic technology, fine ceramics, and handpump systems, alongside revisions to existing standards for water testing and soda lime. The report highlights the specific changes and their potential impact on relevant industries. **2. Introduction:** This report aims to provide a comprehensive overview of the BIS notification issued on October 6, 2022 (Ref: HQPUB01312020PUBBIS 417). The analysis is based solely on the information provided in the notification text and focuses on understanding the core objectives, changes introduced, affected stakeholders, and potential impacts of these updated standards. **3. Policy Overview:** This notification serves as an amendment to existing Indian Standards, replacing or updating earlier versions with newer revisions. The core objective, as inferred from the text, is to update and maintain Indian Standards to reflect current best practices, technological advancements, and international standards, ensuring quality, safety, and efficiency across various industries. **4. Background and Rationale:** The notification reflects an ongoing process of updating and revising existing Indian Standards. The need for these specific amendments likely arises from factors such as: * **Technological Advancements:** As evidenced by the adoption of ISO standards in areas like fine ceramics and graphic technology, the updates aim to incorporate recent technological advancements and align Indian standards with global benchmarks. * **Improved Methodologies:** The revision of water testing standards (IS 3025 Part 29) suggests an effort to improve the accuracy and reliability of testing methodologies. * **Industry Needs:** The revisions may also be driven by specific needs and feedback from various industries, aiming to address evolving requirements and challenges. **5. Key Provisions / Changes:** The notification introduces several key changes across different standards. Here's a breakdown of some notable amendments: * **IS 3025 Part 29:2022 (Methods of Sampling and Test for Water and Waste Water Part 29 Sulphide):** This standard undergoes a *Second Revision*, replacing IS 3025 Part 29:1986 (First Revision). The change signifies updated methodologies for testing sulfide levels in water and wastewater. The *difference* lies in the adoption of more current and potentially accurate methods for sulfide determination, likely leading to improved environmental monitoring and water quality control. * **IS 5321:2022 (Specification for Soda Lime as Carbon Dioxide Absorbent):** This standard receives a *First Revision*, superseding IS 5321:1969. The amendment indicates updated specifications for soda lime used as a carbon dioxide absorbent. The *difference* represents refined requirements for the quality and performance of soda lime, possibly impacting industries using this material for air purification or other CO2 absorption processes. * **IS 15963 Part 9: 2022 (Graphic Technology Process Control for the Production of Half Tone Colour Separations, Proof and Production Prints Part 9 Metal decoration printing processes using offset lithography):** This adopts ISO 126479:2021 standard. This suggests alignment with international best practices in metal decoration printing, potentially leading to improved print quality and consistency. * **IS 16015: 2022 (Mortise Locks and Latches Mortise Locks with Lever Mechanically Operated Mechanism Vertical Type, Specification Sliding Door Locks and Dead Locks Specification):** This receives a *First Revision*, replacing IS 16015:2013. This likely incorporates improvements in the design, functionality, or security features of mortise locks and latches. The *difference* implies enhanced safety and reliability of these locking mechanisms. It also withdraws IS 5930:1970 and IS 6607:1972, potentially consolidating requirements into the revised IS 16015. * **IS 17933: 2022 (Fine Ceramics Advanced Ceramics, Advanced Technical Ceramics Test Method for Flexural Strength of Monolithic Ceramics at Room Temperature):** This adopts ISO 14704:2016 standard. * **IS 17934: 2022 (Fine Ceramics Advanced Ceramics, Advanced Technical Ceramics Weibull Statistics for Strength Data):** This adopts ISO 20501:2019 standard. * **IS 17935: 2022 (Fine Ceramics Advanced Ceramics, Advanced Technical Ceramics Determination of Density and Apparent Porosity):** This adopts ISO18754: 2020 standard. * **IS 17936: 2022 (Fine Ceramics Advanced Ceramics, Advanced Technical Ceramics Vocabulary):** This adopts ISO 20507:2014 standard. * **IS 17941: 2022 (Handpump cum Solar Pumping System Specifications)** - This outlines specifications for these systems. **6. Target Audience and Stakeholders:** The target audience and stakeholders affected by these changes vary depending on the specific standard: * **IS 3025 Part 29:2022:** Water treatment facilities, environmental monitoring agencies, and industries discharging wastewater. * **IS 5321:2022:** Manufacturers and users of soda lime, including hospitals, laboratories, and industrial facilities utilizing CO2 absorption processes. * **IS 15963 Part 9: 2022:** Graphic technology companies that do Metal decoration printing using offset lithography. * **IS 16015:2022:** Manufacturers of mortise locks and latches, construction companies, and consumers using these locking mechanisms. * **IS 17933, IS 17934, IS 17935, IS 17936: 2022:** Manufacturers and users of fine ceramics. * **IS 17941: 2022:** Manufacturers and users of Handpump cum Solar Pumping Systems. **7. Implementation Aspects (Inferred):** * **Responsible Agency/Bodies:** The Bureau of Indian Standards (BIS) is the primary responsible body for implementing and enforcing these standards. * **Timelines/Procedures:** The new standards were established on September 29, 2022. The previous versions of the amended standards will be withdrawn on October 29, 2022, giving stakeholders a one-month transition period. Compliance with the updated standards is expected from the date of their establishment. **8. Expected Outcomes / Impact of Changes:** The intended outcomes of these changes include: * **Improved Quality and Safety:** The updated standards are expected to enhance the quality, safety, and performance of products and services across various sectors. * **Enhanced Environmental Protection:** The revised water testing standards will contribute to improved environmental monitoring and water quality management. * **Increased Competitiveness:** Alignment with international standards will enable Indian manufacturers to compete more effectively in the global market. * **Standardization and Consistency:** The new standards promote standardization and consistency in manufacturing and testing processes. **9. Conclusion:** The BIS notification of October 6, 2022, represents a crucial step in maintaining and improving the quality and relevance of Indian Standards. The revisions and adoptions of international standards across various sectors are expected to have a positive impact on industries, promoting innovation, safety, and competitiveness. Stakeholders are advised to familiarize themselves with the updated standards and ensure compliance within the specified timelines.

Key Entities Referenced