Date: 2022-11-24Category: Extra OrdinaryState: Union GovernmentCountry: India
In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of which are given in the second column of the schedule hereto annexed have been established on the date indicated against
## Report on Notification Regarding Indian Standards (November 18, 2022)
**1. Executive Summary:**
This report analyzes a notification issued by the Bureau of Indian Standards (BIS) on November 18, 2022, regarding the establishment and revision of various Indian Standards. This notification acts as an amendment, updating existing standards and establishing new ones, primarily related to materials testing (rubber, plastics, textiles), electrical equipment, and other technical specifications. The key findings highlight the adoption of international standards (ISO, IEC) and the phasing out of older Indian Standards, suggesting a move towards alignment with global practices and technological advancements. The effective date for most established standards is November 15, 2022, with older standards being withdrawn on December 15, 2022.
**2. Introduction:**
The purpose of this report is to provide an overview of a notification published by the Bureau of Indian Standards (BIS) on November 18, 2022, concerning changes to Indian Standards. The analysis is based solely on the provided text of the notification.
**3. Policy Overview:**
This notification functions as an *amendment* to existing Bureau of Indian Standards Rules, 2018 as it revises and establishes new Indian standards.
Core Objective(s):
* To establish new Indian standards for various materials, products, and processes.
* To revise existing Indian standards, incorporating updates and aligning with international standards where applicable.
* To withdraw outdated Indian standards, ensuring that only current and relevant standards are in force.
**4. Background and Rationale:**
This is an amendment. The reason for this specific amendment appears to be the need to update and modernize Indian Standards. Based on the text, the BIS seeks to align Indian standards with current international practices (ISO and IEC standards). This is evident by the references to international standards associated with the updated Indian standards. The amendment likely aims to improve quality control, promote interoperability, and facilitate trade by adopting globally recognized benchmarks. Obsolete standards are withdrawn to prevent confusion and ensure compliance with current technological and safety requirements.
**5. Key Provisions / Changes:**
This is an amendment, so this section focuses on the specific changes introduced:
* **Specific Part of Original Policy Being Changed:** The notification directly modifies the list of established Indian Standards defined under the Bureau of Indian Standards Rules, 2018 by adding, revising, and removing items.
* **New Rule/Provision:** The notification establishes a series of new and revised Indian Standards, affecting areas such as:
* Methods of Test for Rubber and Plastics (IS 443)
* Methods of Test for Vulcanized Rubber (IS 3400)
* Glossary of Terms Relating to River Valley Projects (IS 4410)
* Methods of Test for Coated Fabrics (IS 7016)
* Electrical Moisture Meters (IS 8824)
* Textile Determination of Fabric Propensity to Surface Pilling (IS 10971)
* Polyamide Fibre Ropes (IS 12733)
* Wheat and Wheat Flour Gluten (IS 16309)
* Recycled Rubber Vulcanized Crumb (IS 17496)
* Plastics Biobased Content (IS 17948)
* Plastics Carbon and Environmental Footprint of Biobased Plastics (IS 17949)
* Incompatibility of Connectors for DC Application in Photovoltaic Systems (IS 17995)
* Plastics Environmental Aspects (IS 17999)
* Plastics Determination of the Ultimate Anaerobic Bidegradation of Plastic Materials (IS 18060)
* **Difference/Effect of the Change:** The amendment introduces new standards where none previously existed and updates existing standards to reflect the latest technological advancements and international best practices. Older versions of the standards are being withdrawn. This ensures that manufacturers and other stakeholders adhere to the most current guidelines, potentially improving product quality, safety, and environmental performance.
**6. Target Audience and Stakeholders:**
Based on the standards listed in the provided text, the target audience and stakeholders include:
* Manufacturers of rubber and plastic products (e.g., tubing, hoses, antistatic rubbers).
* Construction and engineering firms involved in river valley projects and reservoir construction.
* Textile manufacturers and testing laboratories.
* Manufacturers of electrical moisture meters.
* Manufacturers of polyamide fibre ropes.
* Food processing industries dealing with wheat and wheat flour.
* Recycling industries involved in processing recycled rubber.
* Manufacturers of biobased plastics.
* Companies that work with Photovoltaic Systems
* Testing and certification bodies.
* Government agencies responsible for quality control and standardization.
**7. Implementation Aspects (Inferred):**
* **Responsible Agency/Bodies:** The Bureau of Indian Standards (BIS) is the responsible agency for implementing and enforcing these standards.
* **Timelines/Procedures:** The notification states that the newly established standards are effective from November 15, 2022. The standards being withdrawn will cease to be in force from December 15, 2022. The text does not detail any specific procedures for transitioning to the new standards, but it can be inferred that stakeholders are expected to adopt the new standards and discontinue the use of the older ones by the stated deadlines.
* The implementation of these changes will likely require organizations to update their testing procedures, manufacturing processes, and product specifications to comply with the new and revised standards.
**8. Expected Outcomes / Impact of Changes:**
The likely intended outcome of these changes is to:
* Improve the quality and reliability of products and materials covered by the standards.
* Enhance safety and performance in relevant industries.
* Promote harmonization with international standards, facilitating trade and collaboration.
* Encourage the adoption of sustainable practices, particularly in the plastics and recycling industries.
* Reduce confusion and promote clarity, due to the withdrawal of older standards.
**9. Conclusion:**
The BIS notification of November 18, 2022, represents a significant update to Indian Standards across various sectors. The alignment with international standards and the withdrawal of outdated specifications demonstrates a commitment to quality, safety, and global competitiveness. Stakeholders must familiarize themselves with the revised standards to ensure compliance and leverage the potential benefits of these changes. The impact of these changes is expected to be wide-ranging, from improved product quality to enhanced environmental sustainability.
Key Entities Referenced
NEW DELHI: Place of Publication of the Gazette Notification
Bureau of Indian Standards: Organization that publishes the Indian Standards and notifies changes
Bureau of Indian Standards Rules, 2018: Rules governing the Bureau of Indian Standards
Indian Standards: Standards established and notified by the Bureau of Indian Standards
Department of Consumer Affairs: Department under which Bureau of Indian Standards operates
Manak Bhavan: Address of Bureau of Indian Standards, New Delhi
9 Bahadur Shah Zafar Marg, New Delhi 110 002: Address of the Bureau of Indian Standards
Kolkata, West Bengal: Regional Office of Bureau of Indian Standards
Chandigarh: Regional Office of Bureau of Indian Standards
Chennai, Tamil Nadu: Regional Office of Bureau of Indian Standards
Mumbai, Maharashtra: Regional Office of Bureau of Indian Standards
Ahmedabad, Gujarat: Branch Office of Bureau of Indian Standards
Bengaluru, Karnataka: Branch Office of Bureau of Indian Standards
Bhopal, Madhya Pradesh: Branch Office of Bureau of Indian Standards
Bhubaneshwar, Odisha: Branch Office of Bureau of Indian Standards
Coimbatore, Tamil Nadu: Branch Office of Bureau of Indian Standards
Dehradun, Uttarakhand: Branch Office of Bureau of Indian Standards
Faridabad, Haryana: Branch Office of Bureau of Indian Standards
Ghaziabad, Uttar Pradesh: Branch Office of Bureau of Indian Standards
Guwahati, Assam: Branch Office of Bureau of Indian Standards
Hyderabad, Telangana: Branch Office of Bureau of Indian Standards
Jaipur, Rajasthan: Branch Office of Bureau of Indian Standards
Jammu, Jammu and Kashmir: Branch Office of Bureau of Indian Standards
Jamshedpur, Jharkhand: Branch Office of Bureau of Indian Standards
Lucknow, Uttar Pradesh: Branch Office of Bureau of Indian Standards
Nagpur, Maharashtra: Branch Office of Bureau of Indian Standards
Parwanoo, Himachal Pradesh: Branch Office of Bureau of Indian Standards
Patna, Bihar: Branch Office of Bureau of Indian Standards
Pune, Maharashtra: Branch Office of Bureau of Indian Standards
Raipur, Chhattisgarh: Branch Office of Bureau of Indian Standards
Rajkot, Gujarat: Branch Office of Bureau of Indian Standards
Kochi, Kerala: Branch Office of Bureau of Indian Standards
Vishakhapatanam, Andhra Pradesh: Branch Office of Bureau of Indian Standards
ISO 8031: ISO Standard related to Tubing, Hoses and Hose Assemblies
ISO 6803: ISO Standard related to Rubber and Plastics Hoses and Hose Assemblies Hydraulic Pressure Impulse Test Without Flexing
ISO 14309: ISO Standard related to Methods of Test for Rubber Vulcanized or Thermoplastic Part 15 Volume Resistivity
ISO 33032: ISO Standard related to Coated Fabrics and Treated Fabrics Part 6 Determination of Bursting Strength
ISO 129453: ISO Standard related to Textile Determination of Fabric Propensity to Surface Pilling Fuzzing or Matting Part 3 Random Tumble Pilling Method
ISO 129454: ISO Standard related to Textile Determination of Fabric Propensity to Surface Pilling Fuzzing or Matting Part 4 Assessment of Pilling Fuzzing and Matting by Visual Analysis
ISO 10554: ISO Standard related to Polyamide Fibre Ropes Double Braid
ISO 214152: ISO Standard related to Wheat and Wheat Flour Gluten Content of Wet Gluten
ISO 5531: ISO Standard related to Wheat Flour Determination
ISO 166204: ISO Standard related to Plastics Biobased Content Part 4 Determination of Biobased Mass Content
ISO 225261: ISO Standard related to Plastics Carbon and Environmental Footprint of Biobased Plastics Part 1 General Principles
ISO 225262: ISO Standard related to Plastics Carbon and Environmental Footprint of Biobased Plastics Part 2 Material Carbon Footprint, Amount Mass of CO Removed from 2 the Air and Incorporated into Polymer Molecule
IEC TR 63225: IEC Standard related to Incompatibility of Connectors for DC Application in Photovoltaic Systems
ISOTR 21960: ISO Standard related to Plastics Environmental Aspects State of Knowledge and Methodologies
ISO 13975: ISO Standard related to Plastics Determination of the Ultimate Anaerobic Bidegradation of Plastic Materials in Controlled Slurry Digestion Systems Method by Measurement of Biogas Production
Rajeev Sharma: Scientist F DDG Standardization
Government of India Press, Ring Road, Mayapuri, New Delhi 110064: Address of the publishing press
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-24112022-240552
xxxGIDHxxx
CG-DL-E-24112022-240552
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 607] नई ददल्ली, बृहस्ट्प जत ार, न म्ब र 24, 2022/अग्रहायण 3, 1944
No. 607] NEW DELHI, THURSDAY, NOVEMBER 24, 2022/AGRAHAYANA 3, 1944
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल ेज भाग)
अजधसचू ना
नई ददल्ली, 18 न म्बर, 2022
सदं भ:भ HQ-PUB013/1/2020-PUB-BIS (448).—भारतीय मानक ब्यरू ो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतदद्वारा अजधसूजचत करता ह ै की जिन भारतीय मानकों के ज रण
इसमें संलग्न अनूसूची के जद्वतीय स्ट्तंभ में ददये गये ह,ैं तीसरे स्ट्तभं में इंजगत जतजथ को स्ट्थाजपत हो गये हैं| चौथे स्ट्तंभ में ददय े
गय े मानकों के ज रण, यदद कोई हो तो े भी साथ-साथ लाग ू रहगें े िब तक े पााँच ें स्ट्तंभ में इंजगत जतजथ को ापस जलए
िाने ह ैं |
अनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, र् भ प्रजतस्ट्थापन जतजथ भारतीय मानकों, यदद ापस ापस होन ेंकी
स.ं तथा िीर्भक जलए िान ेह,ैं की सख्ं या, र्भ जतजथ
तथा िीर्भक
(1) (2) (3) (4) (5)
1 आई एस 443 (भाग 4) : 2022/आई एस 15 न म्बर 2022 आई एस 443 (भाग 4) : 15 ददसम्बर
ओ 8031 : 2020 2016/आई एस ओ 8031 : 2022
रबड़ ए ं प्लाजस्ट्िक की परीक्षण पद्धजतयााँ 2009
ियूबबग, होि तथा होि एसेम्बली रबड़ ए ं प्लाजस्ट्िक हौज़ की
7813 GI/2022 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
भाग 4 रबड़ ए प्लाजस्ट्िक होि तथा होि परीक्षण पद्धजतयााँ
एसेम्बली ज धुतीय प्रजतरोजधता तथा भाग 4 ज द्युतीय प्रजतरोजधता
चालकता ज्ञात करना तथा चालकता ज्ञात करना
(चौथा पुनरीक्षण) (तीसरा पुनरीक्षण)
2 आई एस 443 (भाग 6) : 2022/आई एस 15 न म्बर 2022 आई एस 443 (भाग 6) : 15 ददसम्बर
ओ 6803 : 2017 2019/आई एस ओ 6803 : 2022
रबड़ ए ं प्लाजस्ट्िक की परीक्षण पद्धजतया ाँ 2017
— ियूबबग, होि तथा होि एसेम्बली रबड़ या प्लाजस्ट्िक होि की
भाग 6 रबर और प्लाजस्ट्िक होसेस और होज़ परीक्षण पद्धजतया ाँ
असेंबली — फ्लेबक्सग के जबना िलीय दाब भाग 6 फ्लेबक्सग के जबना
आ ेग परीक्षण िलीय दाब आ ेग परीक्षण
(पहला पुनरीक्षण)
3 आई एस 3400 (भाग 15) : 2022/आई एस 15 न म्बर 2022 आई एस 3400 (भाग 15) : 15 ददसम्बर
ओ 14309 : 2019 1971 2022
रबड़, ल्कनीकृत या थमोंप्लाजस्ट्िक के रबड़, ल्कनीकृत के जलए
परीक्षण की पद्धजतयााँ परीक्षण की पद्धजतयााँ
भाग 15 आयतन और या सतह प्रजतरोधकता भाग 15 ज द्युत संचालन और
का जनधाभरण एंिीस्ट्िेटिक जघसने की मात्रा
(पहला पुनरीक्षण) प्रजतरोधकता
4 आई एस 4410 (भाग 6) : 2022 15 न म्बर 2022 आई एस 4410 (भाग 6) : 15 ददसम्बर
नदी घािी पटरयोिनाओं से संबंजधत 1983 2022
िब्दा ली नदी घािी पटरयोिनाओं से
भाग 6 िलािय संबंजधत िब्दा ली
(दसू रा पुनरीक्षण) भाग 6 िलािय
(पहला पुनरीक्षण)
5 IS 7016 (भाग 6/अनुभाग 2) : 2022/आई 15 न म्बर 2022 IS 7016 (भाग 6/अनुभाग 2) 15 ददसम्बर
एस ओ 3303-2 : 2020 : 2018/आई एस ओ 3303-2 2022
रबड़ या प्लाजस्ट्िक लेजपत कपड़े की परीक्षण : 2012
पद्धजतयााँ लेजपत ए ं उपचाटरत कपड़े की
भाग 6 स्ट्फोिन प्रबलता ज्ञात करना परीक्षण पद्धजतयााँ
अनुभाग 2 द्र चाजलत पद्धजत भाग 6 स्ट्फोिन प्रबलता ज्ञात
(तीसरा पुनरीक्षण) करना
अनुभाग 2 द्र चाजलत पद्धजत
(दसू रा पुनरीक्षण)
6 आई एस 8824 (भाग 1) : 2022 15 न म्बर 2022 आई एस 8824 (भाग 1) : 15 ददसम्बर
ज द्युत नमी मीिर — ज जिजि 1978 2022
भाग 1 खाद्यान्न, बीि और आिा ज द्युत नमी मीिर के जलए
(पहला पुनरीक्षण) ज जिजि
भाग 1 खाद्यान्न[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 3
7 आई एस 10971 (भाग 3) : 2022/आई एस 15 न म्बर 2022 लागू नहीं लागू नहीं
ओ 12945-3 : 2020
स्त्रादद — कपड़े की सतह पर रोंओं की गााँठे
बनने, रोंएाँ उठने और मैंटिग की प्र ृजत का
जनधाभरण
भाग 3 यादजृछिक पिकन जपबलग ज जध
8 आई एस 10971 (भाग 4) : 2022/आई एस 15 न म्बर 2022 लागू नहीं लागू नहीं
ओ 12945-4 : 2020
स्त्रादद — कपड़े की सतह पर रोंओं की गााँठे
बनने, रोंएाँ उठने और मैंटिग की प्र ृजत का
जनधाभरण
भाग 4 दश्ृ य ज िलेर्ण द्वारा रोंओं की गााँठे
बनने, रोंएाँ उठने और मैंटिग का आकलन
9 आई एस 12733 : 2022/आई एस ओ 15 न म्बर 2022 आई एस 12733 : 1989 15 ददसम्बर
10554 : 2009 पोलीमाइड के दोहरे ब्रेडयुक्त 2022
पॉलीएमाइड रेिों से बनीं रजस्ट्सयााँ — रस्ट्से — ज जिजि
दोहरा ब्रेडयुक्त संरचना
(पहला पुनरीक्षण)
10 आई एस 16309 (भाग 2) : 2022/आई एस 15 न म्बर 2022 आई एस 8162 : 1998/आई 15 ददसम्बर
ओ 21415-2 : 2015 एस ओ 5531 : 1978 2022
गेह ाँए ं गेह ाँका आिा — लासा की मात्रा गेह ाँका आिा — आद्र भलासा का
भाग 2 यांजत्रक साधनों द्वारा आद्र लासा ए ं जनधाभरण
लासा सूचक का जनधाभरण (पहला पुनरीक्षण)
(पहला पुनरीक्षण)
11 आई एस 17496 : 2022 15 न म्बर 2022 लागू नहीं लागू नहीं
पुनश्र्चदक्रत रबड़ — ल्केनाइज्ड क्रंब कण
की ज जिजि
12 आई एस 17948 (भाग 4) : 2022/आई एस 15 न म्बर 2022 लागू नहीं लागू नहीं
ओ 16620-4 : 2016
प्लाजस्ट्िक — िै आधाटरत सामग्री
भाग 4 िै आधाटरत द्रव्यमान सामग्री का
जनधाभरण
13 आई एस 17949 (भाग 1) : 2022/आई एस 15 न म्बर 2022 लागू नहीं लागू नहीं
ओ 22526-1 : 2020
प्लाजस्ट्िक — िै आधाटरत प्लाजस्ट्िक के
काबभन और पयाभ रण फूिबप्रि
भाग 1 सामान्य जसद्धांत
14 आई एस 17949 (भाग 2) : 2022/आई एस 15 न म्बर 2022 लागू नहीं लागू नहीं
ओ 22526-2 : 20204 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
प्लाजस्ट्िक — िै आधाटरत प्लाजस्ट्िक के
काबभन और पयाभ रण फूिबप्रि
भाग 2 काबभन सामग्री फूिजप्रन्ि, CO की
2
मात्रा (द्रव्यमान) को ह ा से हिाकर
पोलीमर अणु में समायोजित
15 आई एस 17995 : 2022/आई ई सी िी आर 15 न म्बर 2022 लागू नहीं लागू नहीं
63225 : 2019
फोिो ोजल्िक प्रणाजलयों में डीसी —
अनुप्रयोग के जलए कनेक्िसभ की असंगजत
16 आई एस 17999 : 2022/आई एस ओ/िी 15 न म्बर 2022 लागू नहीं लागू नहीं
आर 21960 : 2020
प्लाजस्ट्िक — पयाभ रणीय पहलू — ज्ञान
और पद्धजतयों की जस्ट्थजत
17 आई एस 18060 : 2022/आई एस ओ 15 न म्बर 2022 लागू नहीं लागू नहीं
13975 : 2019
प्लाजस्ट्िक — जनयंजत्रत घोल संपाचन तन्त्र में
प्लाजस्ट्िक सामग्री के अल्िीमेि अ ायुिी ी
िै जनम्नीय का जनधाभरण — बायोगैस
उत्पादन मापन पद्यजत
इन मानकों की प्रजतयााँ भारतीय मानक ब्यूरो, मानक भ न, 9 बहादरु िाह ज़फर मागभ, नई ददल्ली 110002, क्षेत्रीय
कायाभलयों:कोलकाता, चंडीगढ़, चेन्नई, मुम्बई तथा िाखा कायाभलयों : अहमदाबाद, बेंगलुरु, भोपाल, भुबनेश्वर, कोयम्बिूर, दहे रादनू ,
फरीदाबाद, गाजज़याबाद, गु ाहािी, हदै राबाद, ियपुर, िम्मु, िमिेदपुर, लखनऊ, नागपुर, पर ानू, पिना, पुणे, रायपुर, रािकोि,
कोजि, ज िाखापिनम में जबक्री हते ु उप्लब्ध ह.ैं भारतीय मानकों को http://www.standardsbis.in पर आनलाईन खरीदा/
डाउनलोड दक या िा सकता ह ै।
रािी िमाभ, ैज्ञाजनक एफ ए ं उपमहाजनदिे क (मानकीकरण – I)
[ज ज्ञापन-III/4/असा./429/2022-23]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 18th November, 2022
Ref: HQ-PUB013/1/2020-PUB-BIS (448).—In pursuance of Sub-rule (1) of Rule (15) of the
Bureau of Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian
standards, particulars of which are given in the second column of the schedule hereto annexed have been
established on the date indicated against it in third column. The particulars of the standards, if any which
are given in the fourth column shall also remain in force concurrently till they are withdrawn on the date
indicated against them in the fifth column.[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 5
SCHEDULE
Sl. No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be withdrawal
withdrawn, if any
(1) (2) (3) (4) (5)
1 IS 443 (Part 4) : 2022/ISO 8031 : 2020 15 Nov 2022 IS 443 (Part 4) : 2016/ISO 15 Dec 2022
Methods of Test for Rubber and Plastics 8031 : 2009
Tubing, Hoses and Hose Assemblies Methods of Test for Rubber
Part 4 Rubber and Plastics Hoses and and Plastics Hoses
Hose Assemblies Determination of Part 4 Determination of
Electrical Resistance and Conductivity Electrical Resistance and
Conductivity
(Fourth Revision)
(Third Revision)
2 IS 443 (Part 6) : 2022/ISO 6803 : 2017 15 Nov 2022 IS 443 (Part 6) : 2019/ISO 15 Dec 2022
Methods of Test for Rubber and Plastics 6803 : 2017
— Tubing, Hoses and Hose Assemblies Methods of Test for Rubber
Part 6 Rubber and Plastics Hoses and and Plastics Hoses
Hose Assemblies — Hydraulic Pressure Part 6 Hydraulic Pressure
Impulse Test Without Flexing Impulse Test Without Flexing
(First Revision)
3 IS 3400 (Part 15) : 2022/ISO 14309 : 15 Nov 2022 IS 3400 (Part 15) : 1971 15 Dec 2022
2019 Methods of Test for
Methods of Test for Rubber Vulcanized Vulcanized Rubber
or Thermoplastic Part 15 Volume Resistivity of
Part 15 Determination of Volume and/or Electrically Conducting and
Surface Resistivity Antistatic Rubbers
(First Revision)
4 IS 4410 (Part 6) : 2022 15 Nov 2022 IS 4410 (Part 6) : 1983 15 Dec 2022
Glossary of Terms Relating to River Glossary of Terms Relating to
Valley Projects River Valley Projects
Part 6 Reservoirs Part 6 Reservoirs
(Second Revision) (First Revision)
5 IS 7016 (Part 6/Sec 2) : 2022/ISO 3303-2 15 Nov 2022 IS 7016 (Part 6/Sec 2) : 15 Dec 2022
: 2020 2018/ISO 3303-2 : 2012
Methods of Test for Rubber or Plastics Methods of Test for Coated
Coated Fabrics and Treated Fabrics
Part 6 Determination of Bursting Part 6 Determination of
Strength Bursting Strength
Section 2 Hydraulic Method Section 2 Hydraulic Method
(Third Revision) (Second Revision)
6 IS 8824 (Part 1) : 2022 15 Nov 2022 IS 8824 (Part 1) : 1978 15 Dec 2022
Electrical Moisture Meters — Specification for Electrical
Specification Moisture Meters
Part 1 Food Grains, Seeds and Flour Part 1 For Food Grains
(First Revision)6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
7 IS 10971 (Part 3) : 2022/ISO 12945-3 : 15 Nov 2022 NA NA
2020
Textile — Determination of Fabric
Propensity to Surface Pilling Fuzzing or
Matting
Part 3 Random Tumble Pilling Method
8 IS 10971 (Part 4) : 2022/ISO 12945-4 : 15 Nov 2022 NA NA
2020
Textile — Determination of Fabric
Propensity to Surface Pilling Fuzzing or
Matting
Part 4 Assessment of Pilling Fuzzing and
Matting by Visual Analysis
9 IS 12733 : 2022/ISO 10554 : 2009 15 Nov 2022 IS 12733 : 1989 15 Dec 2022
Polyamide Fibre Ropes — Double Braid Polyamide Double Braided
Construction Rope — Specification
(First Revision)
10 IS 16309 (Part 2) : 2022/ISO 21415-2 : 15 Nov 2022 IS 8162 : 1998/ISO 5531 : 15 Dec 2022
2015 1978
Wheat and Wheat Flour — Gluten Wheat Flour — Determination
Content of Wet Gluten
Part 2 Determination of Wet Gluten and (First Revision)
Gluten Index by Mechanical Means
(First Revision)
11 IS 17496 : 2022 15 Nov 2022 NA NA
Recycled Rubber — Vulcanized Crumb
Particulate Specification
12 IS 17948 (Part 4) : 2022/ISO 16620-4 : 15 Nov 2022 NA NA
2016
Plastics — Biobased Content
Part 4 Determination of Biobased Mass
Content
13 IS 17949 (Part 1) : 2022/ISO 22526-1 : 15 Nov 2022 NA NA
2020
Plastics — Carbon and Environmental
Footprint of Biobased Plastics
Part 1 General Principles
14 IS 17949 (Part 2) : 2022/ISO 22526-2 : 15 Nov 2022 NA NA
2020
Plastics — Carbon and Environmental
Footprint of Biobased Plastics
Part 2 Material Carbon Footprint,
Amount (Mass) of CO Removed from
2
the Air and Incorporated into Polymer
Molecule[भाग III—खण् ड 4] भारत का रािपत्र : असाधारण 7
15 IS 17995 : 2022/IEC TR 63225 : 2019 15 Nov 2022 NA NA
Incompatibility of Connectors for DC —
Application in Photovoltaic Systems
16 IS 17999 : 2022/ISO/TR 21960 : 2020 15 Nov 2022 NA NA
Plastics — Environmental Aspects —
State of Knowledge and Methodologies
17 IS 18060 : 2022/ISO 13975 : 2019 15 Nov 2022 NA NA
Plastics — Determination of the Ultimate
Anaerobic Bidegradation of Plastic
Materials in Controlled Slurry Digestion
Systems — Method by Measurement of
Biogas Production
Copies of these standards are available for sale with Bureau of Indian Standards, Manak Bhavan, 9 Bahadur
Shah Zafar Marg, New Delhi – 110 002; Regional Offices: Kolkata, Chandigarh, Chennai, Mumbai and
Branch Offices: Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore, Dehradun, Faridabad,
Ghaziabad, Guwahati, Hyderabad, Jaipur, Jammu, Jamshedpur, Lucknow, Nagpur, Parwanoo, Patna, Pune,
Raipur, Rajkot, Kochi, Vishakhapatanam. Online purchase/downloading of Indian Standards can be made
at http://www.standardsbis.in.
RAJEEV SHARMA, Scientist F & DDG (Standardization − I)
[ADVT.-III/4/Exty./429/2022-23]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.