## Policy Analysis Report: Withdrawal of Indian Standards
**1. Executive Summary:**
This report analyzes a notification from the Bureau of Indian Standards (BIS) regarding the withdrawal of 52 Indian Standards (IS). The notification, published on May 16, 2025, details the specific standards being withdrawn, covering a diverse range of industries from textiles and woodworking to machinery and more. The core purpose of this action appears to be the removal of outdated or superseded standards, likely to ensure that current industry practices align with the most relevant and up-to-date specifications. The key finding is the comprehensive scope of the withdrawal, affecting multiple sectors and necessitating stakeholders to adapt to the updated regulatory landscape.
**2. Introduction:**
This report aims to provide a clear and concise overview of the BIS notification concerning the withdrawal of several Indian Standards. The analysis is based solely on the text of the notification provided and intends to inform affected industries about the changes and their potential implications.
**3. Policy Overview:**
This is **not** an amendment. This is a *new* policy action regarding the **withdrawal** of existing standards.
* **Core Objective(s):** The core objective, inferred from the text, is to withdraw outdated or superseded Indian Standards. This is likely done to maintain the relevance and effectiveness of the overall standardization framework within the country. The list has several first and second revisions meaning that some standards already had updates and still have been deemed in need of withdrawl.
**4. Background and Rationale:**
As a **new** policy action (withdrawal), the notification addresses the issue of maintaining current and relevant standards. Outdated standards may no longer reflect best practices or technological advancements, potentially hindering innovation and competitiveness. The withdrawal of these standards suggests a periodic review and update process by the BIS to ensure that only the most current and applicable standards are in effect. This promotes efficiency, safety, and quality across various industries.
**5. Key Provisions / Changes:**
As a **new policy** action, the primary provision is the complete *withdrawal* of the 52 listed Indian Standards. The notification mandates that these standards "have been cancelled and stands withdrawn from the date indicated against it in the third column," which is universally "05 May 2025." The document presents the standards that are withdrawn in a schedule. This schedule details, for each standard:
* Sl No. (Sequential Number)
* Year (of the standard, or revision)
* Title of the Indian Standard
* Withdrawn Date of Withdrawal (05 May 2025 for all entries)
The effect of this withdrawal is that these specific standards can no longer be considered valid or authoritative by the BIS. Organizations previously adhering to these withdrawn standards must now seek updated or alternative specifications.
**6. Target Audience and Stakeholders:**
The direct target audience and stakeholders are the industries and organizations that previously relied on the withdrawn Indian Standards. This includes manufacturers, suppliers, testing laboratories, and any entity that designs, produces, or evaluates products and processes according to these standards. The impacted sectors are diverse, spanning:
* Textile Machinery and Accessories
* Textiles
* Handloom Cotton Netting
* Optical Glass
* Machine Tools
* Metal Cutting
* Woodworking Machines
* Rolling Bearings
* Hydraulic Fluid Power
* Jute and Synthetic Textiles
* Conveyor Belts
**7. Implementation Aspects (Inferred):**
* **Responsible agency/bodies:** The Bureau of Indian Standards (BIS), under the Department of Consumer Affairs, is the responsible body for implementing this withdrawal. The notification is issued under the authority of the Bureau of Indian Standards Rules, 2018.
* **Timelines or procedures:** The withdrawal date is explicitly stated as May 5, 2025, for all the listed standards. The notification itself serves as the primary procedure for communicating this change. However, no specific procedures are outlined *within the provided text* regarding a transition period or guidance for adopting alternative standards.
**8. Expected Outcomes / Impact of Changes:**
The intended outcome of withdrawing these standards is likely to promote the adoption of newer, more relevant, and technologically advanced specifications. The withdrawal compels organizations to:
* Review their current practices and identify areas where they are using the withdrawn standards.
* Determine whether newer versions of these standards exist or if alternative, current standards should be adopted.
* Update their processes, designs, and testing procedures to comply with the new standards.
The impact of these changes could include short-term disruptions as industries adapt, but the long-term benefits should include improved product quality, enhanced safety, and increased competitiveness. Failure to comply with updated standards could result in penalties or market access restrictions.
**9. Conclusion:**
The BIS notification regarding the withdrawal of 52 Indian Standards represents a significant update to the national standardization landscape. The withdrawal, effective May 5, 2025, affects a wide range of industries and necessitates prompt action by stakeholders to ensure continued compliance and competitiveness. This policy action emphasizes the dynamic nature of standards and the importance of ongoing adaptation to remain current with best practices. Affected industries should carefully review the withdrawn standards and proactively implement necessary changes to align with applicable alternatives.
Key Entities Referenced
IS 2219 1962: Indian Standard number and year of publication.
Specification for Optical Glass: Title of the Indian Standard IS 1400 1960.
REGD. No. D. L.3300499: Registration number of the document.
NEW DELHI: Location of publication.
FRIDAY, MAY 16, 2025: Date of publication.
VAISAKHA 26, 1947: Date according to the Indian national calendar.
THE GAZETTE OF INDIA: Title of the publication.
PART IIISEC.4: Section of the gazette.
Bureau of Indian Standards: Organization issuing the notification.
Department of Consumer Affairs: Ministry under which the Bureau of Indian Standards operates.
NOTIFICATION: Type of document.
7st May, 2025: Date of the notification.
HQPUB01712020PUBBIS 1230: Reference number of the notification.
Bureau of Indian Standards Rules, 2018: Rules under which the notification is issued.
Indian standards: Standards that are being withdrawn.
SCHEDULE: Appendix listing the withdrawn standards.
ISISO 3661 : 1988: Indian Standard number and year of publication.
Textile Machinery and Accessories Reeds Part 1 Pitch Bound Reeds Dimensions: Title of the Indian Standard ISISO 3661 : 1988.
05 May 2025: Date of withdrawal for the listed standards.
IS 981 1988: Indian Standard number and year of publication.
Method for Determination of Colour Fastness of Textile Materials to Acid Milling First Revision: Title of the Indian Standard IS 981 1988.
IS 1097 1979: Indian Standard number and year of publication.
Specification for Handloom Cotton Mosquito Netting First Revision: Title of the Indian Standard IS 1097 1979.
IS 1400 1960: Indian Standard number and year of publication.
Feeds for Machine Tools: Title of the Indian Standard IS 2219 1962.
IS 2874 : 1993: Indian Standard number and year of publication.
Textiles Heavy Cee Jute Bags Specification First Revision: Title of the Indian Standard IS 2874 : 1993.
IS 3751 : 1993: Indian Standard number and year of publication.
Textiles Heavy Cee Jute Cloth Specification First Revision: Title of the Indian Standard IS 3751 : 1993.
IS 4637 1988: Indian Standard number and year of publication.
Method for Determination of Colour Fastness of Textile Materials to Steam Under Pressure First Revision: Title of the Indian Standard IS 4637 1988.
IS 5030 Part 3 : 2005: Indian Standard number and year of publication.
Metal Cutting Bandsaw Blade Specification Part 3 Dimensions and Other Requirements Second Revision: Title of the Indian Standard IS 5030 Part 3 : 2005.
IS 5874 1970: Indian Standard number and year of publication.
Specification for Grading of Viscose Rayon Cut Staple Fibres Regular: Title of the Indian Standard IS 5874 1970.
IS 5945 1970: Indian Standard number and year of publication.
Specification for Barograph, Aneroid: Title of the Indian Standard IS 5945 1970.
IS 6453 1984: Indian Standard number and year of publication.
Technical Supply Conditions for Rolling Bearings First Revision: Title of the Indian Standard IS 6453 1984.
IS 7228 1983: Indian Standard number and year of publication.
ISO 7006 1981 Recommended Spindle Diameters for Woodworking Machines with Rotating Bored Tools First Revision: Title of the Indian Standard IS 7228 1983.
IS 7249 : 1993: Indian Standard number and year of publication.
ISO 7568 : 1986 Woodworking Machines Thickness Planing Machines with Rotary Cutterblock of OneSide Dressing Nomenclature and Acceptance Conditions First Revision: Title of the Indian Standard IS 7249 : 1993.
IS 7258 : 1990: Indian Standard number and year of publication.
ISO 7009 : 1983 Woodworking Machines Single Spindle Moulding Machines Nomenclature and Acceptance Conditions First Revision: Title of the Indian Standard IS 7258 : 1990.
IS 7266 : 1991: Indian Standard number and year of publication.
ISO 7946 : 1985 Test Chart for Woodworking Slot Mortising Machines First Revision: Title of the Indian Standard IS 7266 : 1991.
IS 7267 : 1991: Indian Standard number and year of publication.
ISO 7571 : 1986 Test Chart for Woodworking Surface Planing Machines with Cutterblock for OneSide Dressing First Revision: Title of the Indian Standard IS 7267 : 1991.
IS 7279 : 1992: Indian Standard number and year of publication.
ISO 7945 : 1985 Test Chart for Woodworking Single Spindle Boring Machines First Revision: Title of the Indian Standard IS 7279 : 1992.
IS 7286 : 1991: Indian Standard number and year of publication.
ISO 7950 : 1985 Test Chart for Woodworking Single Chain Mortising Machines First Revision: Title of the Indian Standard IS 7286 : 1991.
IS 7289 : 1992: Indian Standard number and year of publication.
ISO 7569 : 1986 Test Chart for Woodworking Planing Machines for Two, Three or FourSide Dressing First Revision: Title of the Indian Standard IS 7289 : 1992.
IS 7294 : 1990: Indian Standard number and year of publication.
ISO 7008 : 1983 Woodworking Machines Single Blade Circular Saw Benches with or without Travelling Table Nomenclature and Acceptance Conditions First Revision: Title of the Indian Standard IS 7294 : 1990.
IS 7296 : 1992: Indian Standard number and year of publication.
ISO 7570 : 1986 Test Chart for Woodworking Surface Planing and Thicknessing Machines First Revision: Title of the Indian Standard IS 7296 : 1992.
IS 7406 Part 1 1984: Indian Standard number and year of publication.
Specification for Jute Bags for Packing Fertilizers Part 1 Laminated Bags Manufactured from 407 gm2; 85 x 39 Tarpaulin Fabric First Revision: Title of the Indian Standard IS 7406 Part 1 1984.
IS 7951 : 2003: Indian Standard number and year of publication.
ISO 81167 : 1995 Textile Machinery and Accessories Beams for Windings Beams for Dyeing Slivers, Rovings and Yarns Second Revision: Title of the Indian Standard IS 7951 : 2003.
IS 8107 : 1993: Indian Standard number and year of publication.
ISO 7948 : 1987 Woodworking Machines Routing Machines Nomenclature and Acceptance Conditions First Revision: Title of the Indian Standard IS 8107 : 1993.
IS 8754 : 1992: Indian Standard number and year of publication.
Electrical Anemograph Specification First Revision: Title of the Indian Standard IS 8754 : 1992.
IS 8964 : 1999: Indian Standard number and year of publication.
Safety Conditions for Woodworking Machines Recommendations First Revision: Title of the Indian Standard IS 8964 : 1999.
IS 9474 1980: Indian Standard number and year of publication.
Specification for Principles of Mechanical Guarding of Machinery: Title of the Indian Standard IS 9474 1980.
IS 9804 Part 1 : 2009: Indian Standard number and year of publication.
ISO 52961 : 1989 Synchronous Belt Drives Belts Part 1 Pitch Codes MXL, XL, L, H, XH and XXH Metric and Inch Dimensions First Revision: Title of the Indian Standard IS 9804 Part 1 : 2009.
IS 9804 Part 2 : 2010: Indian Standard number and year of publication.
ISO 52962 : 1989 Synchronous Belt Drives Belts Part 2 Pitch Codes MXL and XXL Metric Dimensions First Revision: Title of the Indian Standard IS 9804 Part 2 : 2010.
ISISO 99623 : 1994: Indian Standard number and year of publication.
Manually Operated Draughting Machines Part 3 Dimensions of ScaleRule Chuck Plates: Title of the Indian Standard ISISO 99623 : 1994.
IS 10466 1983: Indian Standard number and year of publication.
Guide for Care and Maintenance of Carpets: Title of the Indian Standard IS 10466 1983.
IS 11146 : 1999: Indian Standard number and year of publication.
ISO 7181 : 1991 Hydraulic Fluid Power Cylinders Bore and Rod Area Ratios First Revision: Title of the Indian Standard IS 11146 : 1999.
IS 11398 : 2018: Indian Standard number and year of publication.
ISO 6155 : 1998 Machine Tools Test Conditions for Horizontal Spindle Turret and Single Spindle Automatic Lathes Testing of the Accuracy First Revision: Title of the Indian Standard IS 11398 : 2018.
IS 11507 : 2015: Indian Standard number and year of publication.
ISO 5294 : 2012 Synchronous Belt Drives Pulleys Second Revision: Title of the Indian Standard IS 11507 : 2015.
IS 11559 : 1995: Indian Standard number and year of publication.
ISO 6982 : 1992 Hydraulic Fluid Power Cylinders Rod End Spherical Eyes Mounting Dimensions First Revision: Title of the Indian Standard IS 11559 : 1995.
IS 11560 : 1995: Indian Standard number and year of publication.
ISO 6981 : 1992 Hydraulic Fluid Power Cylinders Rod End Plain Eyes Mounting Dimensions First Revision: Title of the Indian Standard IS 11560 : 1995.
IS 12174 1987: Indian Standard number and year of publication.
Specification for Jute Synthetic Union Bags for Packing Cement: Title of the Indian Standard IS 12174 1987.
IS 13036 : 1991: Indian Standard number and year of publication.
Textiles Apparatus for Testing Colour Fastness of Textile Materials to Washing, Laundering and DryCleaning Specification: Title of the Indian Standard IS 13036 : 1991.
IS 13042 : 1991: Indian Standard number and year of publication.
Textiles Determination of Colour Fastness to Perspiration Apparatus: Title of the Indian Standard IS 13042 : 1991.
IS 13167 : 1991: Indian Standard number and year of publication.
Side and Face Milling Cutters with Indexable Inserts Specification: Title of the Indian Standard IS 13167 : 1991.
IS 13434 : 2005: Indian Standard number and year of publication.
ISO 8135 : 1999 Hydraulic Fluid Power Single Rod Cylinders, 16 MPa 160 bar Medium and 25 MPa 250 bar Series Tolerances First Revision: Title of the Indian Standard IS 13434 : 2005.
IS 13563 : 1992: Indian Standard number and year of publication.
ISO 7506 : 1984 Textile Machinery and Accessories Numbering of Harnesses for Drawingin on Jacquard Machines: Title of the Indian Standard IS 13563 : 1992.
IS 13649 : 1993: Indian Standard number and year of publication.
Textiles Polyethylene Lined Jute Bags for Packing Tea Specification: Title of the Indian Standard IS 13649 : 1993.
IS 14865 : 2001: Indian Standard number and year of publication.
ISO 5609 : 1998 Boring Bars for Indexable Inserts Dimensions: Title of the Indian Standard IS 14865 : 2001.
IS 15287 Part 1 : 2003: Indian Standard number and year of publication.
ISO 63441 : 1998 Coated Abrasives Grain Size Analysis Part 1 Grain Size Distribution Test: Title of the Indian Standard IS 15287 Part 1 : 2003.
IS 15292 : 2003: Indian Standard number and year of publication.
ISO 15187 : 2000 Manipulating Industrial Robots Graphical User Interfaces for Programming and Operation of Robots GUIR: Title of the Indian Standard IS 15292 : 2003.
IS 15427 : 2004: Indian Standard number and year of publication.
Conveyor Belting of Elastomeric and Steel Cord Construction for General Material Handling Specification: Title of the Indian Standard IS 15427 : 2004.
IS 16563 Part 2 : 2017: Indian Standard number and year of publication.
ISO 93552 : 1999 Ergonomic Requirements for the Design of Displays and Control Actuators Part 2 Displays: Title of the Indian Standard IS 16563 Part 2 : 2017.
IS 16563 Part 3 : 2017: Indian Standard number and year of publication.
ISO 93553 : 2006 Ergonomic Requirements for the Design of Displays and Control Actuators Part 3 Control Actuators: Title of the Indian Standard IS 16563 Part 3 : 2017.
IS 16756 : 2018: Indian Standard number and year of publication.
ISO 10247 : 1990 Conveyor Belts Characteristics of Covers Classification: Title of the Indian Standard IS 16756 : 2018.
IS 16765 : 2019: Indian Standard number and year of publication.
ISO 14890 : 2013 Conveyor Belts Specification for Rubber or PlasticsCovered Conveyor Belts of Textile Construction for General Use: Title of the Indian Standard IS 16765 : 2019.
CHITRA GUPTA: Name of the Scientist.
Scientist G DDG Hallmarking and Training: Designation of the scientist.
Government of India Press, Ring Road, Mayapuri, New Delhi110064: Address of the Government of India Press.
Controller of Publications, Delhi110054: Publisher of the gazette.
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-19052025-263211
xxxGIDHxxx
CG-DL-E-19052025-263211
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण्ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 367] नई दिल्ली, िुक्रिार, मई 16, 2025/ििै ाख 26, 1947
No. 367] NEW DELHI, FRIDAY, MAY 16, 2025/VAISAKHA 26, 1947
भारतीय मानक ब्यरू ो
(उपभोक्ता मामल े जिभाग)
अजधसचू ना
नई दिल्ली, 7 मई, 2025
सिं भ:भ HQ-PUB017/1/2020-PUB-BIS (1230).— भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतिद्वाराअजधसूजचत करता ह ै की जिन भारतीय मानको का जििरण
इसके साथ सलं ग्र अनूसूची म े दिया गया ह,ै उन्ह ें कॉलम तीन में इंजगत तारीख को रद्द कर दिया या और िाजपस ल े जलया
गया ह।ै
अनसु चू ी
क्रम िाजपस जलए गए भारतीय मानकों की सख्ं या, िर् भतथा िीर्कभ िाजपस जलए िान ेकी
स.ं तारीख
(1) (2) (3)
1 आई एस/आई एस ओ 366-1 : 1988 05 मई 2025
िस्त्रादि मिीनरी एि ं सहायकांग — रीड
भाग 1 जपच पररबजन्धत रीड — आयाम
3234 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
05 मई 2025
2 आई एस 981 – 1988
एजसड जमललंग के जलए िस्त्र सामग्री की रंग के पक्केपन को ज्ञात करने की पद्धजत
(पहला पुनरीक्षण)
05 मई 2025
3 आई एस 1097 – 1979
हथकरघा कपास मच्छरिानी के जलए जिजिजि
(पहला पुनरीक्षण)
05 मई 2025
4 आई एस 1400 – 1960
ऑजटिकल ग्लास के जलए जिजिजि
05 मई 2025
5 आई एस 2219 – 1962
मिीन िूल्स के जलए फीड
05 मई 2025
6 आई एस 2874 : 1993
िस्त्रादि — हिै ी-सी पिसन के बोरे — जिजिजि
(पहला पुनरीक्षण)
05 मई 2025
7 आई एस 3751 : 1993
िस्त्रादि — हिै ी सी पिसन का कपड़ा — जिजिजि
(पहला पनु रीक्षण)
05 मई 2025
8 आई एस 4637 – 1988
िबाि के तहत भाप के प्रजत िस्त्र सामग्री की रंग के पक्केपन को ज्ञात करन े की पद्धजत
(पहला पुनरीक्षण)
05 मई 2025
9 आई एस 5030 (भाग 3) : 2005
धात ु कािने के पट्टी आरा ब्लडे — जिजिजि
भाग 3 आयाम और अन्य अपेक्षाए ँ
(िसू रा पनु रीक्षण)
05 मई 2025
10 आई एस 5874 – 1970
जिस्ट्कोस रेयान कि स्ट्िेपल फाइबर (जनयजमत) की ग्रेलडगं के जलए जिजिजि
05 मई 2025
11 आई एस 5945 – 1970
बैरोग्राफ, एनरॉइड के जलए जिजिजि[भाग III—खण्ड 4] भारत का रािपत्र : असाधारण 3
05 मई 2025
12 आई एस 6453 – 1984
रोललंग बीयररंग के जलए तकनीकी आपूर्त भ की जस्ट्थजत
(पहला पुनरीक्षण)
05 मई 2025
13 आई एस 7228 – 1983
आई एस ओ 7006 – 1981
घूमने िाल ेऔिारों िाली काष्ठ कायभ मिीनों के जलए अनुिंजसत लस्ट्पंडल व्यास
(पहला पुनरीक्षण)
05 मई 2025
14 आई एस 7249 : 1993
आई एस ओ 7568 : 1986
काष्ठ-कायभ मिीन ें — एक तरफी ड्रेलसंग के घूमी कािन ब्लाक िाली मोिाई टलालनगं मिीनें
— नामपद्धजत और स्ट्िीकायभ अिस्ट्थाएँ
(पहला पुनरीक्षण)
05 मई 2025
15 आई एस 7258 : 1990
आई एस ओ 7009 : 1983
िुडिर्किंग मिीन ें— लसगं ल लस्ट्पंडल मोलल्डंग मिीन ें— नामकरण और स्ट्िीकृजत ित ें
(पहला पनु रीक्षण)
05 मई 2025
16 आई एस 7266 : 1991
आई एस ओ 7946 : 1985
िुडिर्किंग स्ट्लॉि मोर्िभल ंग मिीनों के जलए िेस्ट्ि चािभ
(पहला पनु रीक्षण)
05 मई 2025
17 आई एस 7267 : 1991
आई एस ओ 7571 : 1986
एक साइड ड्रेलसंग के जलए किर ब्लॉक के साथ िुडिर्किंग सरफेस टलालनंग मिीनों के जलए
िेस्ट्ि चािभ
(पहला पुनरीक्षण)
आई एस 7279 : 1992
05 मई 2025
18 आई एस ओ 7945 : 1985
एकल तकुभ बेधन िाली काष्ठकम भमिीन का परीक्षण चािभ
(पहला पुनरीक्षण)
05 मई 2025
19 आई एस 7286 : 1991
आई एस ओ 7950 : 1985
िुडिर्किंग लसंगल चेन मोर्िभल ंग मिीनों के जलए िेस्ट्ि चािभ
(पहला पनु रीक्षण)4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
05 मई 2025
20 आई एस 7289 : 1992
आई एस ओ 7569 : 1986
िो, तीन अथिा चार पाश्र्िीय उपचार के जलए काष्ठकम भरंिा मिीनों का परीक्षण चािभ
(पहला पनु रीक्षण)
05 मई 2025
21 आई एस 7294 : 1990
आई एस ओ 7008 : 1983
िुडिर्किंग मिीन ें— लसगं ल ब्लडे सकुभलर सॉ बेंच रैिललंग िेबल के साथ या उसके जबना
— नामकरण और स्ट्िीकृजत की ितें
(पहला पुनरीक्षण)
05 मई 2025
22 आई एस 7296 : 1992
आई एस ओ 7570 : 1986
सतह रंिा तथा मोिाई िेन े की काष्ठकमभ मिीनों का परीक्षण चािभ
(पहला पनु रीक्षण)
05 मई 2025
23 आई एस 7406 (भाग 1) – 1984
उिभरकों की पैककंग के जलए पिसन बोरो के जलए जिजिजि
भाग 1 407 ग्राम/मी2 से जनर्मतभ लैजमनेिेड बैग; 85 x 39 जतरपाल कपड़ा
(पहला पुनरीक्षण)
05 मई 2025
24 आई एस 7951 : 2003
आई एस ओ 8116-7 : 1995
िस्त्रादि मिीनरी एि ं सहायकांग — आिलन के बीम — सलाइिर, रोलिंग तथा यान भ के
रंिन के जलए बीम
(िसू रा पुनरीक्षण)
05 मई 2025
25 आई एस 8107 : 1993
आई एस ओ 7948 : 1987
काष्ठ-कायभ-उत्कीणभन यंत्र — नामपद्धजत और स्ट्िीकाय भ अिस्ट्थाए ँ
(पहला पुनरीक्षण)
05 मई 2025
26 आई एस 8754 : 1992
जिद्युत पिन िेग लेखी — जिजिजि
(पहला पुनरीक्षण)
05 मई 2025
27 आई एस 8964 : 1999
काष्ठरुपण मिीनों की सुरक्षा ित ें — जसफाररि ें
(पहला पुनरीक्षण)[भाग III—खण्ड 4] भारत का रािपत्र : असाधारण 5
05 मई 2025
28 आई एस 9474 – 1980
मिीनरी की यांजत्रक सुरक्षा के जसद्धांतों के जलए जिजिजि
05 मई 2025
29 आई एस 9804 (भाग 1) : 2009
आई एस ओ 5296-1 : 1989
तुल्यकलक चालन पट्टे — पट्टे
भाग 1 जपच कोड MXL, XL, L, H, XH और
XXH — मीररक एि ं इंच आयाम
(पहला पुनरीक्षण)
05 मई 2025
30 आई एस 9804 (भाग 2) : 2010
आई एस ओ 5296-2 : 1989
तुल्यकलक चालन पट्टे — पट्टे
भाग 2 जपच कोड MXL और XXL — मीररक आयाम
(पहला पुनरीक्षण)
05 मई 2025
31 आई एस/आई एस ओ 9962-3 : 1994
हस्ट्त चाजलत ड्राल्िंग मिीन ें
भाग 3 स्ट्केल रूलचक टलेि के आयाम
05 मई 2025
32 आई एस 10466 – 1983
कालीनों की िेखभाल और रखरखाि के जलए गाइड
05 मई 2025
33 आई एस 11146 : 1999
आई एस ओ 7181 : 1991
द्रिचाजलत तरल िजक्त — जसजलन्डर — बोर तथा छड़ क्षेत्रफल के अनपु ात
(पहला पुनरीक्षण)
05 मई 2025
34 आई एस 11398 : 2018
आई एस ओ 6155 : 1998
मिीनी औ ार — क्षैजति लस्ट्पडं ल िरेि एिं एकल लस्ट्पडं ल स्ट्िचजलत लेथों के जलए
परीक्षण अिस्ट्थायें — पररिुद्धता का परीक्षण
(पहला पुनरीक्षण)
05 मई 2025
35 आई एस 11507 : 2015
आई एस ओ 5294 : 2012
तुल्यकाजलक बल्े ि ड्राइि — जघरनी
(िसू रा पनु रीक्षण)6 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
05 मई 2025
36 आई एस 11559 : 1995
आई एस ओ 6982 : 1992
द्रि चाजलत तरल पािर — जसललंडर — छड़ जिरा गोलाकार छेि — आरोपण आयाम
(पहला पनु रीक्षण)
05 मई 2025
37 आई एस 11560 : 1995
आई एस ओ 6981 : 1992
द्रि चाजलत तरल पािर — जसललंडर — छड़ जिरा सपाि छेि — आरोपण आयाम
(पहला पुनरीक्षण)
05 मई 2025
38 आई एस 12174 – 1987
सीमेंि पैककंग के जलए पिसन लसंथेरिक यूजनयन बगै के जलए जिजिजि
05 मई 2025
39 आई एस 13036 : 1991
िस्त्रादि-धलु ाई, लाडं ररंग और ड्राईक्लीलनगं के प्रजत िस्त्रादि सामजग्रयों के रंग पक्कापन का
परीक्षण करन े का उपकरण — जिजिजि
05 मई 2025
40 आई एस 13042 : 1991
िस्त्रादि — पसीने के प्रजत िस्त्रादि सामजग्रयों के रंग पक्कापन का परीक्षण करने का
उपकरण
05 मई 2025
41 आई एस 13167 : 1991
पररितभनिील इन्सिभ िाले साइड और फेस जमललगं किर — जिजिजि
05 मई 2025
42 आई एस 13434 : 2005
आई एस ओ 8135 : 1999
हाइड्रोजलक द्रि पािर — एक रॉड जसललडं र, 16 मेगापास्ट्कल (160 बार) मध्यम और 25
मेगापास्ट्कल (250 बार) श्ृंखला — छूि
(पहला पनु रीक्षण)
05 मई 2025
43 आई एस 13563 : 1992
आई एस ओ 7506 : 1984
िस्त्रादि मिीनरी एिं सहायकांग — िेकाड भ मिीनों पर चढ़ान े के जलए हानेसों का
संख्यांकन
05 मई 2025
44 आई एस 13649 : 1993
िस्त्रादि — चाय भरने के जलए पॉजलइजथलीन के अस्ट्तर लगे पिसन के थलै े — जिजिजि[भाग III—खण्ड 4] भारत का रािपत्र : असाधारण 7
05 मई 2025
45 आई एस 14865 : 2001
आई एस ओ 5609 : 1998
बिले िा सकन े िाल े इंसिों के जलए प्रिेधन िण्ड — आयाम
05 मई 2025
46 आई एस 15287 (भाग 1) : 2003
आई एस ओ 6344-1 : 1998
लेजपत अपघर्भक — कण साईि का जिश्लेर्ण
भाग 1 कण साईि जितरण परीक्षण
05 मई 2025
47 आई एस 15292 : 2003
आई एस ओ 15187 : 2000
औद्योजगक रोबोि को चलाने की युजक्त — रोबोि के प्रचालन और प्रोग्रालमंग के जलय े
ग्राफीय उपयोगकता भ
इंिरफेस (िी यू आई-आर)
05 मई 2025
48 आई एस 15427 : 2004
सामान्य सामग्री को उठाने चढ़ाने के जलए इलैस्ट्िोमरी और इस्ट्पात डोरी संरचना के िाहक
पट्टे — जिजिजि
05 मई 2025
49 आई एस 16563 (भाग 2) : 2017
आई एस ओ 9355-2 : 1999
की जडिाइन के जलए श्मिक्षता िास्त्र आिश्यकताएँ दिखाता ह ैऔर जनयंत्रण गजत
िेनेिाला
भाग 2 प्रिर्िभत
आई एस 16563 (भाग 3) : 2017 05 मई 2025
50
आई एस ओ 9355-3 : 2006
जडिाइन के जलए श्मिक्षता िास्त्र आिश्यकताएँ दिखाता ह ैऔर जनयंत्रण गजत िने ेिाला
भाग 3 जनयंत्रण गजत िने ेिाला
51
आई एस 16756 : 2018आई एस ओ 10247 : 1990
05 मई 2025
कन्िेयर बेल्ि — किर के लक्षण — िगीकरण
आई एस 16765 : 2019
05 मई 2025
52
आई एस ओ 14890 : 2013
कन्िेयर बेल्ि — सामान्य उपयोग रबर या टलाजस्ट्िक से ढके कन्िेयर बेल्ि िस्त्र के बन े हुए
— जिजििी
जचत्रा गुप्ता, िैज्ञाजनक िी एिं उप महाजनिेिक (हॉलमार्किंग और रेलनगं )
[जिज्ञापन-III/4/असा./100/2025-26]8 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 7st May, 2025
Ref: HQ-PUB017/1/2020-PUB-BIS (1230).—In pursuance of Sub—rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that the Indian standards, particulars of
which are given in schedule hereto annexed have been cancelled and stands withdrawn from the date indicated against
it in the third column.
SCHEDULE
Sl No., Year & Title of the Indian Standard Withdrawn Date of Withdrawal
No.
(1) (2) (3)
05 May 2025
1 IS/ISO 366-1 : 1988
Textile Machinery and Accessories — Reeds
Part 1 Pitch Bound Reeds — Dimensions
2
IS 981 – 1988 05 May 2025
Method for Determination of Colour Fastness of Textile Materials to Acid Milling
(First Revision)
3 IS 1097 – 1979 05 May 2025
Specification for Handloom Cotton Mosquito Netting
(First Revision)
4 IS 1400 – 1960 05 May 2025
Specification for Optical Glass
5 IS 2219 – 1962 05 May 2025
Feeds for Machine Tools
6 IS 2874 : 1993 05 May 2025
Textiles — Heavy Cee Jute Bags — Specification
(First Revision)
7 IS 3751 : 1993 05 May 2025
Textiles — Heavy Cee Jute Cloth — Specification
(First Revision)
8 IS 4637 – 1988 05 May 2025
Method for Determination of Colour Fastness of Textile Materials to Steam Under
Pressure
(First Revision)
9 IS 5030 (Part 3) : 2005 05 May 2025
Metal Cutting Bandsaw Blade —
Specification
Part 3 Dimensions and Other Requirements
(Second Revision)
10 IS 5874 – 1970 05 May 2025
Specification for Grading of Viscose Rayon Cut Staple Fibres (Regular)
11 IS 5945 – 1970 05 May 2025
Specification for Barograph, Aneroid[भाग III—खण्ड 4] भारत का रािपत्र : असाधारण 9
Sl No., Year & Title of the Indian Standard Withdrawn Date of Withdrawal
No.
(1) (2) (3)
12 IS 6453 – 1984 05 May 2025
Technical Supply Conditions for Rolling Bearings
( First Revision )
13 IS 7228 – 1983 05 May 2025
ISO 7006 – 1981
Recommended Spindle Diameters for Woodworking Machines with Rotating Bored
Tools
(First Revision)
14 IS 7249 : 1993 05 May 2025
ISO 7568 : 1986
Woodworking Machines — Thickness Planing Machines with Rotary Cutterblock
of One-Side Dressing — Nomenclature and Acceptance Conditions
(First Revision)
15 IS 7258 : 1990 05 May 2025
ISO 7009 : 1983
Woodworking Machines — Single Spindle Moulding Machines — Nomenclature
and Acceptance Conditions
(First Revision)
16 IS 7266 : 1991 05 May 2025
ISO 7946 : 1985
Test Chart for Woodworking Slot Mortising Machines
(First Revision)
17 IS 7267 : 1991 05 May 2025
ISO 7571 : 1986
Test Chart for Woodworking Surface
Planing Machines with Cutterblock
for One-Side Dressing
(First Revision)
18 IS 7279 : 1992 05 May 2025
ISO 7945 : 1985
Test Chart for Woodworking Single
Spindle Boring Machines
(First Revision)
19 IS 7286 : 1991 05 May 2025
ISO 7950 : 1985
Test Chart for Woodworking Single Chain Mortising Machines
(First Revision)
20 IS 7289 : 1992 05 May 2025
ISO 7569 : 1986
Test Chart for Woodworking Planing Machines for Two, Three or Four-Side
Dressing
(First Revision)
21 IS 7294 : 1990 05 May 2025
ISO 7008 : 1983
Woodworking Machines — Single Blade Circular Saw Benches with or without
Travelling Table — Nomenclature and Acceptance Conditions
(First Revision)10 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
Sl No., Year & Title of the Indian Standard Withdrawn Date of Withdrawal
No.
(1) (2) (3)
IS 7296 : 1992
22 ISO 7570 : 1986 05 May 2025
Test Chart for Woodworking Surface Planing and Thicknessing Machines
(First Revision)
23 IS 7406 (Part 1) – 1984 05 May 2025
Specification for Jute Bags for Packing Fertilizers
Part 1 Laminated Bags Manufactured from 407 g/m2; 85 x 39 Tarpaulin Fabric
(First Revision)
24 IS 7951 : 2003 05 May 2025
ISO 8116-7 : 1995
Textile Machinery and Accessories — Beams for Windings — Beams for Dyeing
Slivers, Rovings and Yarns
(Second Revision)
25 IS 8107 : 1993 05 May 2025
ISO 7948 : 1987
Woodworking Machines — Routing Machines — Nomenclature and Acceptance
Conditions
(First Revision)
26 IS 8754 : 1992 05 May 2025
Electrical Anemograph — Specification
(First Revision)
27 IS 8964 : 1999 05 May 2025
Safety Conditions for Woodworking Machines — Recommendations
(First Revision)
28 IS 9474 – 1980 05 May 2025
Specification for Principles of Mechanical Guarding of Machinery
29 IS 9804 (Part 1) : 2009 05 May 2025
ISO 5296-1 : 1989
Synchronous Belt Drives — Belts
Part 1 Pitch Codes MXL, XL, L, H, XH and XXH — Metric and Inch Dimensions
( First Revision)
30 IS 9804 (Part 2) : 2010 05 May 2025
ISO 5296-2 : 1989
Synchronous Belt Drives — Belts
Part 2 Pitch Codes MXL and XXL — Metric Dimensions
(First Revision)
31 IS/ISO 9962-3 : 1994 05 May 2025
Manually Operated Draughting Machines
Part 3 Dimensions of ScaleRule Chuck Plates
32 IS 10466 – 1983 05 May 2025
Guide for Care and Maintenance of Carpets
33 IS 11146 : 1999 05 May 2025
ISO 7181 : 1991
Hydraulic Fluid Power — Cylinders —
Bore and Rod Area Ratios
( First Revision)[भाग III—खण्ड 4] भारत का रािपत्र : असाधारण 11
Sl No., Year & Title of the Indian Standard Withdrawn Date of Withdrawal
No.
(1) (2) (3)
34 IS 11398 : 2018 05 May 2025
ISO 6155 : 1998
Machine Tools — Test Conditions for Horizontal Spindle Turret and Single Spindle
Automatic Lathes — Testing of the Accuracy
(First Revision)
35 IS 11507 : 2015 05 May 2025
ISO 5294 : 2012
Synchronous Belt Drives — Pulleys
(Second Revision)
36 IS 11559 : 1995 05 May 2025
ISO 6982 : 1992
Hydraulic Fluid Power — Cylinders — Rod End Spherical Eyes — Mounting
Dimensions
(First Revision)
37 IS 11560 : 1995 05 May 2025
ISO 6981 : 1992
Hydraulic Fluid Power — Cylinders — Rod
End Plain Eyes — Mounting Dimensions
(First Revision)
38 IS 12174 – 1987 05 May 2025
Specification for Jute Synthetic Union Bags for Packing Cement
39 IS 13036 : 1991 05 May 2025
Textiles — Apparatus for Testing Colour Fastness of Textile Materials to Washing,
Laundering and Dry-Cleaning — Specification
40 IS 13042 : 1991 05 May 2025
Textiles — Determination of Colour Fastness to Perspiration — Apparatus
41 IS 13167 : 1991 05 May 2025
Side and Face Milling Cutters with
Indexable Inserts — Specification
42 IS 13434 : 2005 05 May 2025
ISO 8135 : 1999
Hydraulic Fluid Power —- Single Rod Cylinders, 16 MPa (160 bar) Medium and
25 MPa (250 bar) Series — Tolerances
(First Revision)
43 IS 13563 : 1992 05 May 2025
ISO 7506 : 1984
Textile Machinery and Accessories — Numbering of Harnesses for Drawing-in on
Jacquard Machines
44 IS 13649 : 1993 05 May 2025
Textiles — Polyethylene Lined Jute Bags for Packing Tea — Specification
45 IS 14865 : 2001 05 May 2025
ISO 5609 : 1998
Boring Bars for Indexable Inserts —
Dimensions12 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
Sl No., Year & Title of the Indian Standard Withdrawn Date of Withdrawal
No.
(1) (2) (3)
46 IS 15287 (Part 1) : 2003 05 May 2025
ISO 6344-1 : 1998
Coated Abrasives — Grain Size Analysis
Part 1 Grain Size Distribution Test
47 IS 15292 : 2003 05 May 2025
ISO 15187 : 2000
Manipulating Industrial Robots — Graphical
User Interfaces for Programming and
Operation of Robots (GUI-R)
48 IS 15427 : 2004 05 May 2025
Conveyor Belting of Elastomeric and Steel
Cord Construction for General Material
Handling — Specification
49 IS 16563 (Part 2) : 2017 05 May 2025
ISO 9355-2 : 1999
Ergonomic Requirements for the
Design of Displays and
Control Actuators
Part 2 Displays
50 IS 16563 (Part 3) : 2017 05 May 2025
ISO 9355-3 : 2006
Ergonomic Requirements for the
Design of Displays and
Control Actuators
Part 3 Control Actuators
51 IS 16756 : 2018 05 May 2025
ISO 10247 : 1990
Conveyor Belts — Characteristics
of Covers — Classification
52 IS 16765 : 2019 05 May 2025
ISO 14890 : 2013
Conveyor Belts — Specification
for Rubber- or Plastics-Covered
Conveyor Belts of Textile
Construction for General Use
CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training)
[ADVT.-III/4/Exty./100/2025-26]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.