In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules,

## Policy Analysis Report: Withdrawal of Indian Standards by the Bureau of Indian Standards **1. Executive Summary:** This report analyzes a notification issued by the Bureau of Indian Standards (BIS) regarding the withdrawal of fifteen Indian Standards (IS). The core purpose, as evidenced in the text, is to formally cancel and withdraw these standards related to testing and analysis methods, primarily concerning metals and ferroalloys, effective November 23, 2022. The key finding is the systematic removal of these specific standards, potentially necessitating a review of current practices in the affected industries. **2. Introduction:** This report aims to provide a comprehensive overview of a notification from the Bureau of Indian Standards (BIS) concerning the withdrawal of specific Indian Standards. The analysis is based solely on the provided text of the notification published in the Gazette of India. **3. Policy Overview:** This is an *amendment* to the existing framework of Indian Standards. * **Core Objective(s) (Inferred):** The notification's primary objective, as inferred from the text, is to remove specific, outdated or superseded Indian Standards from the official registry. The systematic nature of the withdrawal indicates a potential effort to streamline or update the overall set of Indian Standards. **4. Background and Rationale:** * **Rationale for Amendment:** The likely reason for this specific amendment is to remove obsolete or superseded standards. The systematic withdrawal of standards related to specific testing methods and chemical analysis, some dating back to the 1970s and 1980s, suggests a move towards modernization or alignment with updated methodologies or international standards. The withdrawal might also be due to the standards being replaced by newer versions or becoming irrelevant due to technological advancements. **5. Key Provisions / Changes:** This is an amendment, therefore the focus is on changes introduced. The notification lists fifteen Indian Standards that have been *cancelled* and *withdrawn*. The key changes are: * **Specific Parts of Original Policy Being Changed:** The specific parts being changed are the lists of active Indian Standards. The withdrawn standards are removed from this list. * **New Rule/Provision:** There is no new *rule* or *provision* being introduced. The existing rules remain, but now without the applicability of the withdrawn standards. * **Difference/Effect of Change:** The main effect of this change is that the listed standards are no longer recognized as valid or current. Consequently, industries relying on these standards for their testing and analysis procedures need to either adopt newer versions of these standards (if available) or use alternative methodologies. The withdrawal effectively invalidates the use of these specific standards. Here's a summary of the withdrawn standards: | Sl. No. | Standard No. | Title of the Indian Standard | Year | |---------|----------------|-------------------------------------------------------------------------------------------------------------------------|------| | 1 | IS 1499 | Method for Charpy Impact Test UNotch for Metals First Revision | 1977 | | 2 | IS 3766 | Method for Calibration of Pendulum Impact Testing Machine for Testing Metals First Revision | 1977 | | 3 | IS 12514 | Method for Torsional Stress Fatigue Testing | 1988 | | 4 | IS 13452 Part 2 | Chemical Analysis of Ferrochromium Part 2 Determination of Silicon in Low Carbon Ferrochromium by Gravimetric Method | 1992 | | 5 | IS 13452 Part 3 | Chemical Analysis of Ferrochromium Part 3 Determination of Phosphorous in Low Carbon Ferro Chromium by Spectrophotometric Method | 1992 | | 6 | IS 13452 Part 4 | Chemical Analysis of Ferrochromium Part 4 Determination of Total Sulphur in Low Carbon and High Carbon Ferrochromium by Direct Combustion Method | 1992 | | 7 | IS 13452 Part 5 | Chemical Analysis of Ferrochromium Part 5 Determination of Chromium in High Carbon4 THE GAZETTE OF INDIA : EXTRAORDINARY PART IIISEC.4 FerrochromiumChargechrome by Dichromate titration First Revision | 2003 | | 8 | IS 13452 Part 6 | Chemical Analysis of Ferrochromium Part 6 Determination of Chromium in Low Carbon Ferrochromium | 1997 | | 9 | IS 13452 Part 7 | Chemical Analysis of Ferrochromium Part 7 Determination of Phosphorus in FerrochromiumChargechrome by Alkalimetric Method | 2003 | | 10 | IS 13840 Part 1 | Chemical Analysis of Ferrotitanium Part 1 Determination of Carbon by the Direct Combustion Gravimetric Method | 1993 | | 11 | IS 13840 Part 2 | Chemical Analysis of Ferrotitanium Part 2 Determination of Silicon by Gravimetric Method | 1993 | | 12 | IS 13840 Part 3 | Chemical Analysis of Ferrotitanium Part 3 Determination of Titanium by Cupferron Gravimetric Method | 1993 | | 13 | IS 13840 Part 4 | Chemical Analysis of Ferrotitanium Part 4 Determination of Aluminium by Cupferron Gravimetric Method | 1998 | | 14 | IS 13840 Part 5 | Chemical Analysis of Ferrotitanium Part 5 Determination of Sulphur by Direct Combustion Method | 1998 | | 15 | IS 13840 Part 6 | Chemical Analysis of Ferrotitanium Part 6 Determination of Titanium by Xray Fluorescence Spectrometric Method | 1998 | **6. Target Audience and Stakeholders:** Based on the provided text, the target audience and stakeholders directly affected by this amendment include: * Manufacturers of metals, ferrochromium, and ferrotitanium. * Testing laboratories and facilities that perform Charpy Impact Tests, Torsional Stress Fatigue Testing, and chemical analyses of the specified metals and alloys. * Industries that rely on these standards for quality control, product certification, or regulatory compliance. * Accreditation bodies that recognize or require compliance with Indian Standards. **7. Implementation Aspects (Inferred):** * **Responsible Agency:** The Bureau of Indian Standards (BIS) is the responsible agency for implementing this amendment. * **Timelines:** The withdrawal is effective from November 23, 2022. * **(Regarding Amendments):** Companies must cease using these standards from the specified date and transition to other approved standards or testing methods. This transition might require updating internal procedures, re-training personnel, and validating alternative testing methodologies. **8. Expected Outcomes / Impact of Changes:** The likely intended outcome of these changes is to ensure that industries are using the most up-to-date and relevant standards for testing and analysis. The potential impact *of the amendment itself* includes: * A need for industries to update their quality control and testing procedures. * Possible costs associated with adopting new standards or methods. * Improved accuracy and reliability of testing results if the replacement standards are more advanced. * Increased harmonization with international standards (if the replacements align with them). **9. Conclusion:** The Bureau of Indian Standards has withdrawn fifteen Indian Standards related to metal testing and analysis, effective November 23, 2022. This amendment signifies a move towards updating and streamlining the body of Indian Standards. Affected industries must take immediate action to transition to alternative methods and ensure continued compliance with relevant regulations. This notification is significant as it necessitates changes in testing and quality control practices across several industries, impacting manufacturers, testing laboratories, and accreditation bodies.

Key Entities Referenced