## Report on Amendments to Indian Standards Notifications
**1. Executive Summary:**
This report analyzes two notifications from the Bureau of Indian Standards (BIS) published on April 20, 2022, regarding amendments to existing Indian Standards: IS 16892:2018 concerning Sattu Specification and IS 8110:2019 concerning Water Well Screens and Slotted Pipes Specification. The core purpose of these notifications is to formally establish and announce the availability of Amendment No. 1 to each standard. The report identifies the specific changes implemented by the amendments and their potential impact on relevant industries and stakeholders. Key findings highlight the deadlines for the standards without the amendments to remain in force, and the availability of the amendments for purchase from BIS.
**2. Introduction:**
The purpose of this report is to provide an informative overview of two amendment notifications issued by the Bureau of Indian Standards (BIS) on April 11, 2022, pertaining to Indian Standards IS 16892:2018 (Sattu Specification) and IS 8110:2019 (Water Well Screens and Slotted Pipes Specification). The analysis is based solely on the information provided within the notification text.
**3. Policy Overview:**
These notifications concern amendments to existing standards:
* **Amendment 1:** Amends Indian Standard IS 16892:2018 - Sattu Specification.
* **Amendment 2:** Amends Indian Standard IS 8110:2019 - Water Well Screens and Slotted Pipes Specification - Third Revision.
The core objective, as inferred from the text, is to maintain and update Indian Standards to reflect current best practices, technological advancements, or address previously unaddressed issues within the scope of the standards. This ensures the quality and reliability of products and services conforming to these standards.
**4. Background and Rationale:**
The amendments likely address identified deficiencies, incorporate technological advancements, or address clarifications sought after the initial publication of IS 16892:2018 and IS 8110:2019. The specific rationale for each amendment cannot be determined solely from this notification, but the existence of an amendment suggests a need for refinement or improvement of the original standards.
**5. Key Provisions / Changes:**
This section focuses on the changes introduced by the amendments, based on the provided notification:
* **IS 16892:2018 Amendment No. 1 (Sattu Specification):** The notification establishes Amendment No. 1 to IS 16892:2018. The crucial aspect of the amendment is that the original standard without the Amendment No.1, will remain in force until **July 4, 2022**. The content of the change itself is not specified in this notice.
* **IS 8110:2019 Amendment No. 1 (Water Well Screens and Slotted Pipes Specification):** Similarly, the notification establishes Amendment No. 1 to IS 8110:2019. The original standard, without the amendment, will remain in force until **October 7, 2022**. As with the previous amendment, the exact changes introduced are not detailed in this notification.
**Important Note:** The *specific* changes (e.g., revised clauses, new requirements) introduced by Amendment No. 1 for both standards **are not detailed in this notification**. The notification only announces the establishment of the amendment and sets a deadline.
**6. Target Audience and Stakeholders:**
The target audience and stakeholders include:
* Manufacturers and suppliers of Sattu.
* Manufacturers and suppliers of Water Well Screens and Slotted Pipes.
* Testing laboratories and certification bodies involved in assessing compliance with the standards.
* Consumers of Sattu and users of Water Well Screens and Slotted Pipes.
* Government agencies and regulatory bodies referencing these standards.
**7. Implementation Aspects (Inferred):**
* **Responsible Agency:** The Bureau of Indian Standards (BIS) is the responsible agency for establishing and disseminating the amendments.
* **Timelines:** The notification specifies the date until which the original standards, without the amendments, will remain in force (July 4, 2022, for Sattu Specification and October 7, 2022, for Water Well Screens and Slotted Pipes Specification).
* **Access to Amendments:** Copies of the amendments are available for purchase from BIS at Manak Bhawan, Regional Offices, Branch Offices and online from http:www.standardsbis.in.
**8. Expected Outcomes / Impact of Changes:**
The intended outcome of these amendments is to ensure that the relevant industries are adhering to the most up-to-date and accurate standards for Sattu and Water Well Screens and Slotted Pipes. The impact of *these specific changes* (which cannot be detailed due to lack of information in the provided text) would be felt by manufacturers who must now conform to the amended standards to ensure product compliance and market access. Failure to adopt the amendments after the specified deadlines may result in non-compliance.
**9. Conclusion:**
The BIS notification establishes amendments to Indian Standards IS 16892:2018 and IS 8110:2019, setting deadlines for the original standards to remain in force without the amendments. Manufacturers and stakeholders in the Sattu and Water Well Screens and Slotted Pipes industries should acquire and implement these amendments by July 4, 2022 and October 7, 2022 respectively, to ensure continued compliance with Indian Standards. It is critical for affected parties to obtain the actual amendment documents from BIS to understand the specific changes and their implications.
Key Entities Referenced
Bureau of Indian Standards: An organization that establishes and notifies amendments to Indian standards.
Bureau of Indian Standards Rules, 2018: A set of rules governing the Bureau of Indian Standards, specifically Rule 15.
Indian Standards: Standards established and amended by the Bureau of Indian Standards.
IS 16892 : 2018: A specific Indian Standard related to Sattu Specification.
Sattu Specification: The title or subject of the Indian Standard IS 16892: 2018.
IS 8110 : 2019: A specific Indian Standard related to Water Well Screens and Slotted Pipes.
Water Well Screens and Slotted Pipes: The title or subject of the Indian Standard IS 8110 : 2019.
New Delhi: Location of the head office of Bureau of Indian Standards, Manak Bhawan.
Kolkata: Location of a Regional Office of Bureau of Indian Standards.
Chandigarh: Location of a Regional Office of Bureau of Indian Standards.
Chennai, Tamil Nadu: Location of a Regional Office of Bureau of Indian Standards.
Mumbai, Maharashtra: Location of a Regional Office of Bureau of Indian Standards.
Ahmedabad, Gujarat: Location of a Branch Office of Bureau of Indian Standards.
Bengaluru, Karnataka: Location of a Branch Office of Bureau of Indian Standards.
Bhopal, Madhya Pradesh: Location of a Branch Office of Bureau of Indian Standards.
Bhubaneshwar, Odisha: Location of a Branch Office of Bureau of Indian Standards.
Coimbatore, Tamil Nadu: Location of a Branch Office of Bureau of Indian Standards.
Dehradun, Uttarakhand: Location of a Branch Office of Bureau of Indian Standards.
Faridabad, Haryana: Location of a Branch Office of Bureau of Indian Standards.
Ghaziabad, Uttar Pradesh: Location of a Branch Office of Bureau of Indian Standards.
Guwahati, Assam: Location of a Branch Office of Bureau of Indian Standards.
Hyderabad, Telangana: Location of a Branch Office of Bureau of Indian Standards.
Jaipur, Rajasthan: Location of a Branch Office of Bureau of Indian Standards.
Jammu, Jammu and Kashmir: Location of a Branch Office of Bureau of Indian Standards.
Jamshedpur, Jharkhand: Location of a Branch Office of Bureau of Indian Standards.
Lucknow, Uttar Pradesh: Location of a Branch Office of Bureau of Indian Standards.
Nagpur, Maharashtra: Location of a Branch Office of Bureau of Indian Standards.
Parwanoo, Himachal Pradesh: Location of a Branch Office of Bureau of Indian Standards.
Patna, Bihar: Location of a Branch Office of Bureau of Indian Standards.
Pune, Maharashtra: Location of a Branch Office of Bureau of Indian Standards.
Raipur, Chhattisgarh: Location of a Branch Office of Bureau of Indian Standards.
Rajkot, Gujarat: Location of a Branch Office of Bureau of Indian Standards.
Kochi, Kerala: Location of a Branch Office of Bureau of Indian Standards.
Vishakhapatanam, Andhra Pradesh: Location of a Branch Office of Bureau of Indian Standards.
J. ROY CHOWDHURY: Scientist G DDG Standardization at Bureau of Indian Standards.
रजजस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
xxxGIDHxxx
सी.जी.-डी.एलxx.x-GअID.-E2x1x0x 42022-235259
CG-DL-E-21042022-235259
असाधारण
EXTRAORDINARY
भाग III—खण् ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 210] नई ददल्ली, बुध ार, अप्रलै 20, 2022/चत्रै 30, 1944
No. 210] NEW DELHI, WEDNESDAY, APRIL 20, 2022/CHAITRA 30, 1944
भारतीय मानक ब्य ूरो
(उपभोक्त ा मामल ेज भाग)
अजधसचू ना
नई ददल्ली, 11 अप्रैल, 2022
सदं भ:भ HQ-PUB014/1/2020-PUB-BIS (345).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के उपजनयम (1)
के अनुसरण में भारतीय मानक ब्यूरो एतदद्वारा अजधसूजचत करता ह ैइसमें संलग्न अनूसूची में ददये गय ेमानकों में संिोधन दकये गय ेह।ैं
अनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, र् भतथा िीर्कभ सिं ोधनों की सख्ं या सिं ोधनों की जतजथ जब तक मानक
स.ं ए ं जतजथ प्रजतस्ट्थापन जतजथ तीसरे स्ट्तंभ म ेंइंजगत
सिं ोधन के जबना भी
लाग ूरहगे ा
(1) (2) (3) (4) (5)
1 आई एस 16892 : 2018 संिोधन संख्या 1 5 अप्रैल 2022 4 जुलाई 2022
सत्तू ─ ज जिजि अप्रैल 2022
इन मानकों की प्रजतयााँ भारतीय मानक ब्यूरो, मानक भ न, 9 बहादरु िाह ज़फर मागभ, नई ददल्ली 110002, क्षेत्रीय
कायाभलयों:कोलकाता, चंडीगढ़, चेन्नई, मुम्बई तथा िाखा कायाभलयों : अहमदाबाद, बेंगलुरु, भोपाल, भुबनेश्वर, कोयम्बटूर, दहे रादनू ,
फरीदाबाद, गाजज़याबाद, गु ाहाटी, हदै राबाद, जयपुर, जम्मु, जमिेदपुर, लखनऊ, नागपुर, पर ानू, पटना, पुणे, रायपुर, राजकोट,
2765 GI/2022 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
कोजि, ज िाखापटनम में जबक्री हते ु उपलब्ध हैं. भारतीय मानकों में संिोधनों को http://www.standardsbis.in पर आनलाईन
खरीदा/ डाउनलोड दक या जा सकता ह ै।
जे. राय चौधरी, ैज्ञाजनक जी ए ं उपमहाजनदिे क (मानकीकरण–I)
[ज ज्ञापन III/4/असा./31/2022-23]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 11th April, 2022
Ref: HQ-PUB014/1/2020-PUB-BIS (345).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments to Indian standards,
particulars of which are given in schedule hereto annexed have been established.
SCHEDULE
Sl No., Year & Title of the Indian Standard No. and Date of Date till which
No. Month/Year of the Establishment the standard
Amendment of the without the
Amendment amendment as
mentioned in
column 3 shall
remain in force
(1) (2) (3) (4) (5)
1 IS 16892 : 2018 Amendment No. 1 5 Apr 2022 4 July 2022
Sattu ─ Specification Apr 2022
Copies of these amendments are available for sale with Bureau of Indian Standards, Manak Bhawan, 9 Bahadur Shah
Zafar Marg, New Delhi–110 002; Regional Offices: Kolkata, Chandigarh, Chennai, Mumbai and Branch Offices:
Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore, Dehradun, Faridabad, Ghaziabad, Guwahati, Hyderabad,
Jaipur, Jammu, Jamshedpur, Lucknow, Nagpur, Parwanoo, Patna, Pune, Raipur, Rajkot, Kochi, Vishakhapatanam.
Online purchase/downloading of anedments to Indian Standards can be made at http://www. standardsbis.in.
J. ROY CHOWDHURY, Scientist G & DDG (Standardization−I)
[ADVT.-III/4/Exty./31/2022-23]
अजधसचू ना
नई ददल्ली, 11 अप्रैल, 2022
सदं भ:भ HQ-PUB014/2/2020-PUB-BIS (346).—भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के उपजनयम (1)
के अनुसरण में भारतीय मानक ब्यूरो एतदद्वारा अजधसूजचत करता ह ैइसमें संलग्न अनूसूची में ददये गय ेमानकों में संिोधन दकये गय ेह।ैं
अनसु चू ी
क्रम स्ट्थाजपत भारतीय मानकों की सख्ं या, र् भतथा सिं ोधनों की सख्ं या ए ं सिं ोधनों की जतजथ जब तक
स.ं जतजथ प्रजतस्ट्थापन जतजथ मानक तीसरे स्ट्तभं
िीर्भक
म ेंइंजगत सिं ोधन के
जबना भी लाग ू
रहेगा
(1) (2) (3) (4) (5)
1 आई एस 8110 : 2019 संिोधन संख्या 1 8 अप्रैल 2022 7 अक्टूबर 2022
जल कूप छन्नक जाली ए ं खााँचदार पाईप─
अप्रैल 2022
ज जिजि[भाग III—खण् ड 4] भारत का राजपत्र : असाधारण 3
(तीसरा पुनरीक्षण)
इन मानकों की प्रजतयााँ भारतीय मानक ब्यूरो, मानक भ न, 9 बहादरु िाह ज़फर मागभ, नई ददल्ली 110002, क्षेत्रीय
कायाभलयों:कोलकाता, चंडीगढ़, चेन्नई, मुम्बई तथा िाखा कायाभलयों : अहमदाबाद, बेंगलुरु, भोपाल, भुबनेश्वर, कोयम्बटूर, दहे रादनू ,
फरीदाबाद, गाजज़याबाद, गु ाहाटी, हदै राबाद, जयपुर, जम्मु, जमिेदपुर, लखनऊ, नागपुर, पर ानू, पटना, पुणे, रायपुर, राजकोट,
कोजि, ज िाखापटनम में जबक्री हते ु उलबलब्ध ह.ैं भारतीय मानकों में संिोधनों को http://www.standardsbis.in पर आनलाईन
खरीदा/ डाउनलोड दक या जा सकता ह ै।
जे. राय चौधरी, ैज्ञाजनक जी ए ं उपमहाजनदिे क (मानकीकरण–I)
[ज ज्ञापन III/4/असा./31/2022-23]
NOTIFICATION
New Delhi, the 11th April, 2022
Ref: HQ-PUB014/2/2020-PUB-BIS (346).—In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Amendments to Indian standards,
particulars of which are given in schedule hereto annexed have been established.
SCHEDULE
Sl. No., Year & Title of the Indian Standard No. and Date of Date till which
No. Month/Year of the Establishment the standard
Amendment of the without the
Amendment amendment as
mentioned in
column 3 shall
remain in force
(1) (2) (3) (4) (5)
1 IS 8110 : 2019 Amendment No. 1 8 Apr 2022 7 Oct 2022
Water Well Screens and Slotted Pipes ─ Apr 2022
Specification
(Third Revision)
Copies of these amendments are available for sale with Bureau of Indian Standards, Manak Bhawan, 9 Bahadur Shah
Zafar Marg, New Delhi–110 002; Regional Offices: Kolkata, Chandigarh, Chennai, Mumbai and Branch Offices:
Ahmedabad, Bengaluru, Bhopal, Bhubaneshwar, Coimbatore, Dehradun, Faridabad, Ghaziabad, Guwahati, Hyderabad,
Jaipur, Jammu, Jamshedpur, Lucknow, Nagpur, Parwanoo, Patna, Pune, Raipur, Rajkot, Kochi, Vishakhapatanam.
Online purchase/downloading of anedments to Indian Standards can be made at http://www.standardsbis.in.
J. ROY CHOWDHURY, Scientist G & DDG (Standardization−I)
[ADVT.-III/4/Exty./31/2022-23]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.