## Policy Analysis Report: Bureau of Indian Standards Notification (June 20, 2025)
**1. Executive Summary:**
This report analyzes a notification issued by the Bureau of Indian Standards (BIS) on June 20, 2025. The notification pertains to the establishment and revision of several Indian Standards across various industries, ranging from domestic gas stoves to ergonomic design for machinery. It outlines the newly established standards, alongside the concurrent validity and subsequent withdrawal dates of older standards they supersede. The key finding is a systematic update and revision of existing standards to align with current technological advancements and safety considerations.
**2. Introduction:**
The purpose of this report is to provide a comprehensive analysis of a notification published by the Bureau of Indian Standards (BIS) on June 20, 2025 (Ref: HQPUB01312020PUBBIS 1271). The analysis is based solely on the text of the provided notification and aims to inform affected industries about the new and revised Indian Standards and their implications.
**3. Policy Overview:**
This notification details amendments to existing Indian Standards. The core objective, as inferred from the text, is to update and maintain the relevance and efficacy of Indian Standards across diverse product categories. This ensures products manufactured and sold in India adhere to current safety guidelines, performance criteria, and technological advancements.
**4. Background and Rationale:**
The notification signifies a need to revise existing Indian Standards to reflect current industry practices, technological advancements, and safety considerations. The specific amendments suggest a response to outdated specifications within the original standards. Each amendment aims to address specific shortcomings or incorporate improvements identified since the original standard was established. The recurring theme across the amendments is to update and enhance the quality, safety, and performance benchmarks for the products covered.
**5. Key Provisions / Changes:**
This notification introduces changes to various existing standards. The key changes include:
* **IS 4246 : 2025 (Domestic Gas Stoves):** The original IS 4246:2002 is being withdrawn on December 17, 2025, and the sixth revision (IS 4246:2025) takes effect on June 17, 2025. This implies updates to the specifications for domestic gas stoves, likely incorporating new safety features, efficiency improvements, or design modifications.
* **IS 7794 : 2025 (Manual Portable Grease Guns):** The original IS 7794:1984 is being withdrawn on December 17, 2025, and the second revision (IS 7794:2025) takes effect on June 17, 2025. This signifies an update in the specifications for manual portable grease guns, possibly focusing on enhanced durability, performance, or user-friendliness.
* **IS 11672 : 2025 (Tungsten Carbide Buttons and Inserts):** The original IS 11672:1986 is being withdrawn on December 17, 2025, and the first revision (IS 11672:2025) takes effect on June 17, 2025. This suggests updates to the specifications for tungsten carbide buttons and inserts, potentially incorporating new material compositions, manufacturing processes, or performance requirements.
* **IS 14279 : 2025 (Lubricating Equipment Barrel Transfer Pumps):** The original IS 9772:1981 and IS 14279:1995 is being withdrawn on December 17, 2025, and the first revision (IS 14279:2025) takes effect on June 17, 2025. This indicates changes to the specifications for lubricating equipment, likely related to pump efficiency, material standards, or design modifications.
* **IS 15755 : 2025 (Hydrometry Geophysical Logging of Boreholes):** The original IS 15755:2007 is being withdrawn on December 17, 2025, and the first revision (IS 15755:2025) takes effect on June 17, 2025. This reflects an update in the guidelines for hydrometry geophysical logging, possibly incorporating advancements in measurement techniques, data interpretation methods, or equipment specifications.
* **IS 15836 Part 3 : 2025 (Ergonomic Design for the Safety of Machinery):** The original IS 15836 Part 3: 2008 and ISO 155343:2000 is being withdrawn on December 17, 2025, and the first revision (IS 15836 Part 3:2025) takes effect on June 17, 2025. This indicates updates to the ergonomic design standards, potentially incorporating new anthropometric data, design principles, or safety considerations.
* **IS 17150 : 2025 (Mini Domestic Water Heater):** The original IS 17150:2019 is being withdrawn on December 17, 2025, and the first revision (IS 17150:2025) takes effect on June 17, 2025. This indicates a change in mini domestic water heater specifications.
* **IS 19312 : 2025 (Inflatable Balls):** Various existing standards, including IS 417 Parts 1-6 and IS 11729, are being withdrawn on December 17, 2025. This implies a consolidated and updated specification for inflatable balls.
**6. Target Audience and Stakeholders:**
The primary target audience includes manufacturers, suppliers, and distributors across the following industries:
* Domestic gas stove manufacturers
* Grease gun manufacturers
* Manufacturers of tungsten carbide buttons and inserts
* Manufacturers of lubricating equipment
* Companies involved in hydrometry and geophysical logging
* Machinery manufacturers
* Domestic water heater manufacturers
* Inflatable ball manufacturers
Other stakeholders include consumers, regulatory bodies, testing laboratories, and organizations involved in standardization and quality control.
**7. Implementation Aspects (Inferred):**
* **Responsible Agency:** The Bureau of Indian Standards (BIS) is the responsible agency for implementing and enforcing these standards.
* **Timelines:** The new standards are established on June 17, 2025, and the older versions are to be withdrawn on December 17, 2025. This provides a six-month transition period for industries to comply with the updated requirements.
* **Certification:** It is inferred that compliance with these standards will be verified through BIS certification schemes. Manufacturers will likely need to obtain BIS certification for their products to demonstrate adherence to the updated standards.
**8. Expected Outcomes / Impact of Changes:**
The intended outcome of these amendments is to improve the quality, safety, and performance of the products covered by the standards. This will likely lead to:
* Enhanced safety for consumers.
* Improved product reliability and durability.
* Greater efficiency and performance.
* Increased competitiveness of Indian manufacturers in the global market.
* Harmonization with international standards and best practices.
**9. Conclusion:**
The BIS notification represents a systematic effort to update and maintain Indian Standards across various product categories. The amendments aim to reflect current technological advancements, safety considerations, and industry best practices. Manufacturers need to be aware of these changes and ensure compliance with the updated standards within the stipulated timelines. The transition period allows for necessary adjustments in production processes and product designs to meet the new requirements. This update is significant for maintaining product quality, enhancing consumer safety, and fostering the competitiveness of Indian industries.
Key Entities Referenced
Bureau of Indian Standards: A national standards body of India responsible for standardization, marking and quality certification of goods.
Department of Consumer Affairs: A department under the Ministry of Consumer Affairs, Food and Public Distribution in India.
New Delhi: The capital of India, where the notification was issued.
Bureau of Indian Standards Rules, 2018: A set of rules governing the operations of the Bureau of Indian Standards.
IS 4246: Indian Standard for Domestic Gas Stove and Built in Domestic Gas Stoves for Use Hob for Use with LPG with Liquefied Petroleum Specification Gases Specification
IS 7794: Indian Standard for Manual Portable Grease Guns Specification for Manual Specification Portable Grease Guns
IS 11672: Indian Standard for Tungsten Carbide Buttons and Specification for Tungsten Carbide Buttons and Inserts for DTH Bits
IS 19312: Indian Standard for Inflatable Balls Specification
रजिस्ट्री स.ं डी.एल.- 33004/99 REGD. No. D. L.-33004/99
सी.जी.-डी.एल.-अ.-28062025-264216
xxxGIDHxxx
CG-DL-E-28062025-264216
xxxGIDExxx
असाधारण
EXTRAORDINARY
भाग III—खण्ड 4
PART III—Section 4
प्राजधकार स ेप्रकाजित
PUBLISHED BY AUTHORITY
स.ं 464] नई ददल्ली, िुक्रिार, िनू 27, 2025/आषाढ़ 6, 1947
No. 464] NEW DELHI, FRIDAY, JUNE 27, 2025/ASHADHA 6, 1947
भारतीय मानक ब्य रू ो
(उपभोक्त ा मामल े जिभाग)
ubZ fnYyh] 20 िून 2025
सदं भ:भ HQ-PUB013/1/2020-PUB-BIS (1271).— भारतीय मानक ब्यूरो जनयम, 2018 के जनयम 15 के
उपजनयम (1) के अनुसरण म ें भारतीय मानक ब्यूरो एतदद्वारा अजधसूजित करता ह ै की जिन भारतीय मानकों के जििरण
इसम ें संलग्न अनूसूिी के जद्वतीय स्ट्तंभ म ें ददय े गय े ह,ैं तीसरे स्ट्तभं म ें इंजगत जतजि को स्ट्िाजपत हो गय े ह|ैं िौिे स्ट्तंभ म ें ददय े
गय े मानकों के जििरण, यदद कोई हो तो ि े भी साि-साि लाग ू रहगें े िब तक ि े पााँिि ें स्ट्तंभ म ें इंजगत जतजि को िापस जलए
िाने ह|ैं
4237 GI/2025 (1)2 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
अनसु िू ी
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िष भ प्रजतस्ट्िापन जतजि भारतीय मानकों, यदद िापस जलए िापस होन ेकी
स.ं जतजि
तिा िीषकभ िान ेह,ैं की सख्ं या, िष भतिा िीषकभ
(5)
(1) (2) (3) (4)
1 17 िून 2025 17 दिसम्बर 2025
आई एस 4246 : 2025 आई एस 4246 : 2002
द्रजित पेरोजलयम गैस के साि प्रयुक्त घरेलू द्रजित पेरोजलयम गैसों के साि
गैस िूल्ह ेऔर जनर्मभत हॉब्स — जिजिजि प्रयुक्त घरेलू गैस िूल्ह े— जिजिजि
(छठा पुनरीक्षण) (पााँििां पुनरीक्षण)
2 17 िून 2025 17 दिसम्बर 2025
आई एस 7794 : 2025 आई एस 7794 – 1984
हस्ट्तिाजलत सुिाह्य ग्रीस गन — जिजिजि हस्ट्तिाजलत सुिाह्य ग्रीस गन के
(दसू रा पुनरीक्षण) जलए जिजिजि
(पहला पुनरीक्षण)
3 17 िून 2025 17 दिसम्बर 2025
आई एस 11672 : 2025 आई एस 11672 – 1986
डाउन-द-होल (डीटीएि) जबट्स के उपयोग डाउन-द-होल (डीटीएि) जबट्स के
हते ु टंग्सस्ट्टेन काबाभइड बटन और जनजिजि — उपयोग हते ु टंग्सस्ट्टेन काबाभइड बटन
जिजिजि और जनजिजि के जलए जिजिजि
(पहला पुनरीक्षण)
4 17 िून 2025 17 दिसम्बर 2025
आई एस 14279 : 2025 आई एस 9772 – 1981
स्नेहन उपकरण — ग्रीस के जलए बैरल िायु संिाजलत उच्च दाब ग्रीस पम्पों
अन्तरण पम्प — जिजिजि के जलए जिजिजि
(पहला पुनरीक्षण)
आई एस 14279 : 1995
स्नेहन उपस्ट्कर — ग्रीस के जलये
बैरल अन्तरण पम्प — जिजिजि
5 17 िून 2025 17 दिसम्बर 2025
आई एस 15755 : 2025 आई एस 15755 : 2007
िलजमजत — िलिैज्ञाजनक सम्बन्धी उद्देश्यों हाइड्रोमीटरी —
के जलए बोरहोल की भू-भौजतकीय लॉगगंग हाइड्रोजिओलॉजिकल प्रयोिनों के
— मापन के जलए जििार और ददिाजनदेि जलए िेध-जछद्रों की भू भौजतकीय
(पहला पुनरीक्षण) लॉगगंग — मापन के जििार और
मागभदिी जसद्ांत
6 17 िून 2025 17 दिसम्बर 2025
आई एस 15836 (भाग 3) : 2025 आई एस 15836 (भाग 3) : 2008
मिीनरी की सुरक्षा के जलए एगोनॉजमक आई एस ओ 15534-3 : 2000
जडजाइन भाग 3 एंथ्रोपोमेट्ररक डाटा मिीनरी की सुरक्षा के जलए
(पहला पुनरीक्षण) इगोनॉजमक जडिाइन
भाग 3 एंथ्रोपोमीटरी आाँकड़े[भाग III—खण्ड 4] भारत का रािपत्र : असाधारण 3
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िष भ प्रजतस्ट्िापन जतजि भारतीय मानकों, यदद िापस जलए िापस होन ेकी
स.ं जतजि
तिा िीषकभ िान ेह,ैं की सख्ं या, िष भतिा िीषकभ
(5)
(1) (2) (3) (4)
7 17 िून 2025 17 दिसम्बर 2025
आई एस 17150 : 2025 आई एस 17150 : 2019
पाइप नेिुरल गैस (पीएनिी) के प्रयोग हते ु पाइप नेिुरल गैस (पी एन िी) के
जमनी घरेलू पानी के हीटर — जिजिजि प्रयोग हते ु जमनी घरेलु पानी के
(पहला पुनरीक्षण) हीटर — जिजिजि
8 17 िून 2025 17 दिसम्बर 2025
आई एस 19312 : 2025 आई एस 417 (भाग 1) : 2003
हिा िाली गेंदें — जिजिजि फुटबालों, िॉलीबालों,
बाजस्ट्कटबालों, नेटबालों, थ्रोबालों
और िाटर-पोलो बालों — जिजिजि
भाग 1 फुटबाल
(िौिा पुनरीक्षण)
आई एस 417 (भाग 2) – 1986
फुटबालों, िॉलीबालों,
बाजस्ट्कटबालों, नेटबालों, थ्रोबालों
और िाटर-पोलो बालों के जलए
जिजिजि
भाग 2 िॉलीबाल
(िौिा पुनरीक्षण)
आई एस 417 (भाग 3) – 1986
फुटबालों, िॉलीबालों,
बाजस्ट्कटबालों, नेटबालों, थ्रोबालों
और िाटर-पोलो बालों के जलए
जिजिजि
भाग 3 बास्ट्केटबाल
(िौिा पुनरीक्षण)
आई एस 417 (भाग IV) – 1976
फुटबालों, िॉलीबालों,
बाजस्ट्कटबालों, नेटबालों, थ्रोबालों
और िाटर-पोलो बालों के जलए
जिजिजि
भाग IV नेटबाल
(तीसरा पुनरीक्षण)
आई एस 417 (भाग V) – 1976
फुटबालों, िॉलीबालों,
बाजस्ट्कटबालों, नेटबालों, थ्रोबालों,
और िाटर-पोलो बालों के जलए
जिजिजि
भाग V थ्रोबाल4 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
क्रम स्ट्िाजपत भारतीय मानकों की सख्ं या, िष भ प्रजतस्ट्िापन जतजि भारतीय मानकों, यदद िापस जलए िापस होन ेकी
स.ं जतजि
तिा िीषकभ िान ेह,ैं की सख्ं या, िष भतिा िीषकभ
(5)
(1) (2) (3) (4)
(तीसरा पुनरीक्षण)
आई एस 417 (भाग VI) – 1976
फुटबालों, िॉलीबालों,
बाजस्ट्कटबालों, नेटबालों, थ्रोबालों
और िाटर-पोलो बालों के जलए
जिजिजि
भाग VI िाटर-पोलो बाल
(तीसरा पुनरीक्षण)
आई एस 11729 – 1986
हडैं बॉल के जलए जिजिजि
जित्रा गुप्ता, िैज्ञाजनक िी एि ं उप महाजनदेिक (हॉलमार्किंग एि ं रेगनगं )
[जिज्ञापन-III/4/असा./197/2025-26]
BUREAU OF INDIAN STANDARDS
(Department of Consumer Affairs)
NOTIFICATION
New Delhi, the 20th June,2025
Ref: HQ-PUB013/1/2020-PUB-BIS (1271).— In pursuance of Sub-rule (1) of Rule (15) of the Bureau of
Indian Standards Rules, 2018, the Bureau of Indian Standards hereby notifies that Indian standards, particulars of
which are given in the second column of the schedule hereto annexed have been established on the date indicated
against it in third column. The particulars of the standards, if any which are given in the fourth column shall also
remain in force concurrently till they are withdrawn on the date indicated against them in the fifth column.
THE SCHEDULE
Sl No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be Withdrawal
Withdrawn, if any
(1) (2) (3) (4) (5)
17 June 2025
1 IS 4246 : 2025 IS 4246 : 2002 17 December 2025
Domestic Gas Stove and Built in Domestic Gas Stoves for Use
Hob for Use with LPG — with Liquefied Petroleum
Specification Gases — Specification
(Sixth Revision) (Fifth Revision)
17 June 2025
2 IS 7794 : 2025 IS 7794 – 1984 17 December 2025
Manual Portable Grease Guns — Specification for Manual
Specification Portable Grease Guns
(Second Revision) (First Revision)[भाग III—खण्ड 4] भारत का रािपत्र : असाधारण 5
Sl No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be Withdrawal
Withdrawn, if any
(1) (2) (3) (4) (5)
17 June 2025
3 IS 11672 : 2025 IS 11672 – 1986 17 December 2025
Tungsten Carbide Buttons and Specification for Tungsten
Inserts for Use in Down-The-Hole Carbide Buttons and Inserts for
(DTH) Bits — Specification Use in Down-the-Hole (DTH)
(First Revision) Bits
17 June 2025
4 IS 14279 : 2025 IS 9772 – 1981 17 December 2025
Lubricating Equipment — Barrel Specification for Air Operated
Transfer Pumps for Grease — High Pressure Grease Pumps
Specification
(First Revision) IS 14279 : 1995
Lubricating Equipment —
Barrel Transfer Pumps for
Grease — Specification
17 June 2025
5 IS 15755 : 2025 IS 15755 : 2007 17 December 2025
Hydrometry — Geophysical Hydrometry — Geophysical
Logging of Boreholes for Logging of Boreholes for
Hydrogeological Purposes — Hydrogeological Purposes —
Considerations and Guidelines for Considerations and Guidelines
Making Measurements for Making Measurements
(First Revision)
17 June 2025
6 IS 15836 (Part 3) : 2025 IS 15836 (Part 3) : 2008 17 December 2025
Ergonomic Design for the Safety of ISO 15534-3 : 2000
Machinery Ergonomic Design for the
Part 3 Anthropometric Data Safety of Machinery
(First Revision) Part 3 Anthropometric Data
17 June 2025
7 IS 17150 : 2025 IS 17150 : 2019 17 December 2025
Mini Domestic Water Heater for Mini Domestic Water Heater
Use with Piped Natural Gas (PNG) for Use with Piped Natural Gas
— Specification (PNG) — Specification
(First Revision)
17 June 2025
8 IS 19312 : 2025 17 December 2025
Inflatable Balls — Specification IS 417 (Part 1) : 2003
Footballs, Volleyballs,
Basketballs, Netballs,
Throwballs and Water-Polo
Balls — Specification
Part 1 Footballs
(Fourth Revision)
IS 417 (Part 2) – 1986
Specification for Footballs,
Volleyballs, Basketballs,
Netballs, Throwballs and
Water-Polo Balls
Part 2 Volleyballs
(Fourth Revision)
IS 417 (Part 3) – 19866 THE GAZETTE OF INDIA : EXTRAORDINARY [PART III—SEC.4]
Sl No., Year & Title of the Indian Date of No. , Year & Title of the Date of
No. Standards Established Establishment Indian Standards to be Withdrawal
Withdrawn, if any
(1) (2) (3) (4) (5)
Specification for Footballs,
Volleyballs, Basketballs,
Netballs, Throwballs and
Water-Polo Balls
Part 3 Basketballs
(Fourth Revision)
IS 417 (Part IV) – 1976
Specification for Footballs,
Volleyballs, Basketballs,
Netballs, Throwballs and
Water-Polo Balls
Part IV Netballs
(Third Revision)
IS 417 (Part V) – 1976
Specification for Footballs,
Volleyballs, Basketballs,
Netballs, Throwballs, and
Water-Polo Balls
Part V Throwballs
(Third Revision)
IS 417 (Part VI) – 1976
Specification for Footballs,
Volleyballs, Basketballs,
Netballs, Throwballs and
Water-Polo Balls
Part VI Water-Polo Balls
(Third Revision)
IS 11729 – 1986
Specification for
Handballs
CHITRA GUPTA, Scientist G & DDG (Hallmarking and Training)
[ADVT. III/4/Extry./197/2025-26]
Uploaded by Dte. of Printing at Government of India Press, Ring Road, Mayapuri, New Delhi-110064
and Published by the Controller of Publications, Delhi-110054.