In pursuance of Sub rule 1 of Rule 15 of the Bureau of Indian Standards Rules

## Report on Amendment to Indian Standard IS 15961:2012 **1. Executive Summary:** This report analyzes an amendment to the Indian Standard IS 15961:2012 concerning Hot Dip Aluminum Zinc Alloy Metallic Coated Steel Strip and Sheet. The provided text details Amendment No. 3, established on November 24, 2022, and specifies that the standard without this amendment will remain in force until February 23, 2023. This amendment likely aims to update the standard to reflect current industry practices or address previously identified shortcomings, ensuring the quality and consistency of the specified steel products. The key finding is that manufacturers of these steel products have a limited window to comply with the amended standard. **2. Introduction:** This report provides an overview and analysis of Amendment No. 3 to Indian Standard IS 15961:2012, based solely on the information provided in the official notification. The purpose is to inform stakeholders about the changes and their potential implications. **3. Policy Overview:** * This report concerns an *amendment* to an existing policy: IS 15961:2012, which pertains to "Hot Dip Aluminum Zinc Alloy Metallic Coated Steel Strip and Sheet." * **Core Objective(s):** Based on the title, the overarching objective of the original standard (and by extension, the amendment) is to define and maintain standards for the production and characteristics of Hot Dip Aluminum Zinc Alloy Metallic Coated Steel Strip and Sheet. The amendment aims to update these standards. **4. Background and Rationale:** As this document refers to an amendment, we can infer that IS 15961:2012 has been updated. The amendment is likely based on feedback from industry, new technological advancements, or a need to address issues with the existing standard. The need for Amendment No. 3 suggests that previous versions required refinement or adjustment to better meet the needs of the industry or ensure product quality. The document does not provide details, we can only speculate. **5. Key Provisions / Changes:** This section focuses specifically on the changes introduced by Amendment No. 3. * **Original Policy Part Affected:** The document does not specify which exact section of the original policy that is being changed, however, it effects the policy overall. * **New Rule/Provision:** The text only states that Amendment No. 3 has been established and references the date. The actual content of the change is not provided. It is stated that the current policy remains in effect until February 23, 2023. * **Difference/Effect of Change:** Without the content of Amendment No. 3, it is impossible to definitively state the difference or effect of the change. However, it implies that the older version of the standard becomes obsolete for compliance purposes after February 23, 2023, requiring manufacturers to adhere to the amended standard. **6. Target Audience and Stakeholders:** The primary target audience and stakeholders are manufacturers of "Hot Dip Aluminum Zinc Alloy Metallic Coated Steel Strip and Sheet," as well as industries that utilize these materials. This includes steel producers, construction companies, automotive manufacturers, and any other sector where this type of steel product is used. Furthermore, organizations involved in quality control and standardization within the steel industry are also stakeholders. **7. Implementation Aspects (Inferred):** * **Responsible Agency/Bodies:** The Bureau of Indian Standards (BIS) is the responsible agency, as indicated by the notification and the reference to the "Bureau of Indian Standards Rules, 2018." The BIS is responsible for establishing, publishing, and selling the standards. * **Timelines/Procedures:** The amendment was established on November 24, 2022. The original policy remains valid until February 23, 2023. After February 23, 2023, manufacturers must adhere to Amendment No. 3. The procedure involves obtaining the updated standard from BIS (either physically or online) and implementing the changes in their production processes. **8. Expected Outcomes / Impact of Changes:** The intended outcome of Amendment No. 3 is likely to improve the quality, consistency, and performance of Hot Dip Aluminum Zinc Alloy Metallic Coated Steel Strip and Sheet manufactured in compliance with the standard. This could lead to enhanced durability, corrosion resistance, and overall reliability of products made from this material. The impact of the changes will depend on the specific content of the amendment. **9. Conclusion:** Amendment No. 3 to Indian Standard IS 15961:2012 represents an update to the standards governing the production of Hot Dip Aluminum Zinc Alloy Metallic Coated Steel Strip and Sheet. While the specific details of the amendment are not included in the provided text, the notification signals the need for manufacturers to obtain and implement the revised standard by February 23, 2023. Compliance with the updated standard is crucial for maintaining product quality and meeting regulatory requirements within the Indian market.

Key Entities Referenced